Valve Manufacturer Actuator Manufacturer Valve Tag No. Purchasers Spec. No. Design Standard Size, mm (inch) NB Ends 6-44-0052 BS 5351 15(1/2) to 40(1) Both Ends Flanged, WN, RF (As per ANSI B16.5) 0 CORROSION INHIBITOR (CHEMICAL) Not applicable Not applicable
---------ANSI Rating EIL Piping Class Face Finish of Flanges 600# D1K 125 AARH
A182 Gr. F304 RPTFE WITH SECONDARY METAL TO METAL A182 Gr. F304 PTFE/GRAFOIL A182 Gr. F304 (No Casting) PTFE ASTM A 193 Gr. B7/B7M ASTM A 194 Gr. 2H/4/7 Body: 2225, Seat: 1650 80
A Rev
01.05.05 Date
TR
MSG
SK
By
Chk
Approved
Notes:
1. Valve data sheet shall be read in conjunction with technical notes of valves no. 6-440052. 2. All valves shall be provided with valve position indicator. 3. Material Test certificates and Hydrotest reports shall be furnished prior to despatch. 4. All tests shall be as per BS 6755,Part I. 5. Stops shall be provided to ensure proper alignment of valve with ports and ensure proper installation of wrench. 6. Gland packing assembly shall permit repair of gland packing under full line pressure. 7. Each valve shall be supplied with one wrench. 8. All Valves shall be fire safe design. Fire safe test shall be as per BS 6755 Part-II. 9. 100% valve castings shall undergo radiography examination. 10. 10% of valve in each size shall undergo hydrostatic test of seat. Soft seat shall be replaced after hydrostatic test. After this all valves shall be air tested. 11. Bidder shall certify the suitability of valves for intended service conditions. 12. Stem seal shall be renewable with valve open on Stream. 13. Stem seal/ body seal materials shall be provided with corrosion inhibitor. 14. Floating ball valve shall be provided with pressure equalisation seats to relieve the body bonnet cavity pressure to the upstream side. 15. All valves shall be bi-directional type. 16. Painting of the valves shall be as per Manufacturers Standard. 17. Detailed dimensional drawings showing cross-section with part numbers and materials shall be submitted for approval.
A Rev
01.05.05 Date
TR
MSG
SK
By
Chk
Approved