! 4,1
44thick breit
NEW
4 4 thick breit
8 12
! 4,1
End Fitting
A3.5
Ball Kugel R4 R4
8 12
!3 !8
A3.5
Stroke Hub L+/2 mm extended L+/2 mm ausgefahren
B3.5 C3.5
!13
M3,5 5
Dimensions
Type
GS-8-20 GS-8-30 GS-8-40 GS-8-50 GS-8-60 GS-8-80
!8
B3.5
Stroke mm 20 30 40 50 60 80 L Extended 72 92 112 132 152 192
5
DIN 71802
C3.5
8,5 10 36 18 M4
18
D3.5
8 5
!4
Ordering Example
4 8
GS-8-30-AC-V-30
DIN 71752
D3.5
16
G3.5
4
!8
Type (Push Type) Body (8 mm) Stroke (30 mm) Piston Rod End Fitting A3.5 Body End Fitting C3.5 Valve V3.5 Nominal Force F1 30 N
!8
16
!13
The end fittings are interchangeable. For adjustment valve add suffix -V. For mounting accessories see page 108.
18
DIN 71805
G3.5
6 18
W3.5-8
Rod Shroud
U3.5
!11
5 Hub + 10 LL==Stroke + 10
Adjuster Knob
V3.5
Adjustment Valve
GS-8
Technical Data
ACE gas springs are self-contained and maintenance free. Mounting position: Can be mounted in any position but we recommend mounting with piston rod downwards. End position damping length: approx. 10 mm. Progression: approx. 28 %, F2 max. 130 N. Operating temperature range: -20C to +80C. Operating fluid: Nitrogen gas and oil (for end damping). Available force range F1 at 20C: 10 to 100 N. Material: Body: powder coated steel. Piston rod: stainless steel. End fittings: zinc plated steel. To special order: Without damping, extended length damping, special force curves, special lengths, alternative end fittings.
95
OG3.5
Controls International Belvedere Road Newton-le-Willows WA12 0JJ Tel 01925 227171 Fax 01925 229323 E-mail info@ace-controls.co.uk
95
! 4,1
4 thick breit
4breit thick 4
! 4,1
End Fitting
A3.5
Ball Kugel RR44
8 12
!3 ! 10
A3.5
8 12
B3.5 C3.5
!13
M3,5 5
Dimensions
Type
GS-10-20 GS-10-30 GS-10-40 GS-10-50 GS-10-60 GS-10-80
!8
B3.5
Stroke mm 20 30 40 50 60 80 L Extended 72 92 112 132 152 192
5
DIN 71802
C3.5
8,5 10 36 18 M4
18
D3.5
8 5
!4
Ordering Example
4 8
GS-10-80-AC-V-60
DIN 71752
D3.5
16
G3.5
4
!8
Type (Push Type) Body (10 mm) Stroke (80 mm) Piston Rod End Fitting A3.5 Body End Fitting C3.5 Valve V3.5 Nominal Force F1 60 N
!8
16
!13
The end fittings are interchangeable. For adjustment valve add suffix -V. For mounting accessories see page 108.
18
DIN 71805
G3.5
6 18
W3.5-10
Rod Shroud
U3.5
!13
Adjuster Knob
LL==Stroke + 10 Hub + 10
V3.5
Adjustment Valve
GS-10
A3.5 C3.5
Technical Data
D3.5 G3.5
ACE gas springs are self-contained and maintenance free. Mounting position: Can be mounted in any position but we recommend mounting with piston rod downwards. End position damping length: approx. 5 mm. Progression: approx. 20 %, F2 max. 120 N. Operating temperature range: -20C to +80C. Operating fluid: Nitrogen gas and oil (for end damping). Available force range F1 at 20C: 10 to 100 N. Material: Body: powder coated steel. Piston rod: stainless steel. End fittings: zinc plated steel. To special order: Without damping, extended length damping, special force curves, special lengths, alternative end fittings.
96
NA3.5 A3.5 OA3.5
NG3.5
OG3.5
96
Controls International Belvedere Road Newton-le-Willows WA12 0JJ Tel 01925 227171 Fax 01925 229323 E-mail info@ace-controls.co.uk
! 4,1
4 thick breit
4breit thick 4
! 4,1
End Fitting
A3.5
Ball Kugel R44 R
8 12
!4 ! 12
A3.5
8 12
B3.5 C3.5
! 13
M3,5 5
Dimensions
Type
GS-12-20 GS-12-40 GS-12-50 GS-12-60 GS-12-80 GS-12-100 GS-12-120 GS-12-150
!8
B3.5
Stroke mm 20 40 50 60 80 100 120 150 L Extended 72 112 132 152 192 232 272 332 Max. F1 180 N 180 N 180 N 180 N 150 N 150 N 120 N 100 N
5
DIN 71802
C3.5
8,5 10 36 18 M4
18
D3.5
8 5
!4
DIN 71752
D3.5
Ordering Example
4 8 16
GS-12-100-AA-V-30
G3.5
4
!8
!13
!8
Type (Push Type) Body (12 mm) Stroke (100 mm) Piston Rod End Fitting A3.5 Body End Fitting A3.5 Valve V3.5 Nominal Force F1 30 N The end fittings are interchangeable. For adjustment valve add suffix -V. For mounting accessories see page 108.
16
DIN 71805
G3.5
6 18
18
W3.5-12
Rod Shroud
U3.5
!15
Adjuster Knob
LL==Stroke + 10 Hub + 10
V3.5
Adjustment Valve
GS-12
Technical Data
ACE gas springs are self-contained and maintenance free. Mounting position: can be mounted in any position but we recommend mounting with the piston rod downwards so that the damping is effective at end of extension stroke. End position damping length: approx. 10 mm. Progression: approx. 25 %, F2 max. 225 N. Operating temperature range: -20C to +80C. Operating fluid: Nitrogen gas and oil (for end damping). Available force range F1 at 20C: 10 to 180 N. Material: Body: powder coated steel. Piston rod: stainless steel. End fittings: zinc plated steel. To special order: Without damping, extended length damping, special force curves, special lengths (max. 150 mm stroke), alternative end fittings.
97
OG3.5
Controls International Belvedere Road Newton-le-Willows WA12 0JJ Tel 01925 227171 Fax 01925 229323 E-mail info@ace-controls.co.uk
97
! 6,1
6 6 thick breit
6 breit thick 6
! 6,1
End Fitting
A5
Ball Kugel RR55
10 Hub Stroke 16
!6 ! 15
A5
10 16
B5
!13
M5 5
Dimensions
Type
GS-15-20 GS-15-40 GS-15-50 GS-15-60 GS-15-80 GS-15-100 GS-15-120 GS-15-150
!8
B5
Stroke mm 20 40 50 60 80 100 120 150 L Extended 66 106 126 146 186 226 266 326
5
C5
8 10 36
DIN 71802
C5
12 22 M5
!6
22
D6
12
DIN 71752
6 12
D6
Ordering Example
24
!13
GS-15-150-AC-V-400
24
E5
6 10
7
24 !6
!10
4,5
12 30 SW13 AF13
12
!8
Type (Push Type) Body (15 mm) Stroke (150 mm) Piston Rod End Fitting A5 Body End Fitting C5 Valve V5 Nominal Force F1 400 N The end fittings are interchangeable. For adjustment valve add suffix -V. For mounting accessories see page 108.
DIN 648
E5
30
F5 G5
M5 45
F5
28
10 20 28
!13 !8
DIN 71805
22
G5 U5
4,5
!8
12 22
W5-15
Rod Shroud
!19
5 Hub + 20 LL==Stroke + 20
Adjuster Knob
V5
GS-15
Adjustment Valve
A5
C5
D6 E5 F5 G5
Technical Data
ACE gas springs are self-contained and maintenance free. Mounting position: Can be mounted in any position but we recommend mounting with the piston rod downwards so that the damping is effective at end of extension stroke. End position damping length: approx. 10 mm. Progression: approx. 27 %, F2 max. 500 N. Operating temperature range: -20C to +80C. Operating fluid: Nitrogen gas and oil (for end damping). Available force range F1 at 20C: 10 to 400 N. Material: Body: powder coated steel. Piston rod: hard chrome plated. End fittings: zinc plated steel. To special order: Without damping, extended length damping, special force curves, special lengths (max. 250 mm stroke), alternative end fittings.
98
NA5 OA5 PA5
98
Controls International Belvedere Road Newton-le-Willows WA12 0JJ Tel 01925 227171 Fax 01925 229323 E-mail info@ace-controls.co.uk
! 8,1
10 10 thick breit
10breit thick 10
! 8,1
End Fitting
A8
Ball Kugel RR77
14 Hub Stroke 20 L+/2 mm ausgefahren L+/2 mm extended 20
!8 ! 19
A8
14
B8
! 20
M8 9
Dimensions
Type
GS-19-50 GS-19-100 GS-19-150 GS-19-200 GS-19-250 GS-19-300
! 13
B8
Stroke mm 50 100 150 200 250 300 L Extended 164 264 364 464 564 664
8
C8
12 16,5 36
DIN 71802
C8
15 30 M8
!8
30
D8
16
DIN 71752
8 16
D8
Ordering Example
32
!16
GS-19-150-AC-V-600
32
E8
8 12
10
24 !8
!12
Type (Push Type) Body (19 mm) Stroke (150 mm) Piston Rod End Fitting A8 Body End Fitting C8 Valve V8 Nominal Force F1 600 N The end fittings are interchangeable. For adjustment valve add suffix -V. For mounting accessories see page 109.
DIN 648
E8 F8
13 36 SW15 AF15
16
! 12
36
F8 G8
M8 45
12 22 31
!20 ! 13
31
DIN 71805
30
G8 U8
6
! 13
15 30
W8-19
Rod Shroud
!23
8 Hub + 30 LL==Stroke + 30
Adjuster Knob
V8
GS-19
Adjustment Valve
A8
C8
D8 E8 F8 G8
Technical Data
ACE gas springs are self-contained and maintenance free. Mounting postion: Can be mounted in any position but we recommend mounting with the piston rod downwards so that the damping is effective at end of extension stroke. End damping length: approx. 10 mm. Progression: approx. 33 %, F2 max. 930 N. Operating temperature: -20C to +80C (with special seals up to 200C). Operating fluid: Nitrogen gas and oil (for end damping). Available force range F1 at 20C: 50 to 700 N. Material: Body: powder coated steel. Piston rod: hard chrome plated. End fittings: zinc plated steel. To special order: Without damping, extended length damping, special force curves, special lengths, alternative end fittings.
MA8 NA8 OA8 PA8 OE8 PE8 PG8 OG8 E8 ME8 NE8 NG8
99
Controls International Belvedere Road Newton-le-Willows WA12 0JJ Tel 01925 227171 Fax 01925 229323 E-mail info@ace-controls.co.uk
99
! 8,1
10 10 thick breit
10 10thick breit
! 8,1
End Fitting
A8
Ball Kugel RR77
14 20 M8
! 10 ! 22
A8
14 20 Hub Stroke L+/2 mm ausgefahren L+/2 mm extended
B8 C8
!20
B8
DIN 71802
Dimensions
9
! 13
Type
GS-22-50 GS-22-100 GS-22-150 GS-22-200 GS-22-250 GS-22-300 GS-22-350 GS-22-400 GS-22-450 GS-22-500 GS-22-550 GS-22-600 GS-22-650 GS-22-700
12 16,5 30 M8 36
!8
15
D8
16
8 16
Stroke mm 50 100 150 200 250 300 350 400 450 500 550 600 650 700
L Extended 164 264 364 464 564 664 764 864 964 1 064 1 164 1 264 1 364 1 464
C8
DIN 71752
D8
E8
8
10
24 !8
32
!16
32
!12
DIN 648
E8 F8
Ordering Example
13 12 M8 45 36 16
! 12
GS-22-150-AE-V-800
36
F8 G8
AF15 SW15
12 22 31
!20 ! 13
Type (Push type) Body (22 mm) Stroke (150 mm) Piston Rod End Fitting A8 Body End Fitting E8 Valve V8 Nominal Force F1 800 N The end fittings are interchangeable. For adjustment valve add suffix -V. For mounting accessories see page 109.
DIN 71805
G8
6
! 13
W8-22
Rod Shroud
U8
!28
8 L= Hub + + 30 L= Stroke 30
Adjuster Knob
GS-22
A8 C8 D8 E8 F8 G8
V8
Adjustment Valve
Technical Data
ACE gas springs are self-contained and maintenance free. Mounting Position: Can be mounted in any position but we recommend mounting with piston rod downwards so that damping is effective at end of extension stroke. End damping length: approx. 10 mm. Progression: approx. 38 %, F2 max. 1800 N. Operating temperature range: -20C to +80C (with special seals up to 200C). Operating fluid: Nitrogen gas and oil (for end damping). Available force range F1 at 20C: 80 to 1300 N. Material: Body: powder coated steel. Piston rod: hard chrome plate. End fittings: zinc plated steel. To special order: Without damping, extended length, damping, special force curves, special lengths, alternative end fittings.
100
NA8 OA8 PA8
100
Controls International Belvedere Road Newton-le-Willows WA12 0JJ Tel 01925 227171 Fax 01925 229323 E-mail info@ace-controls.co.uk
Standard Dimensions
12 12 thick breit
12 12thick breit
End Fitting
! 8,1
A10
Ball Kugel RR99
17 25 M10
! 14 ! 28
A10
17 25 Hub Stroke L+/2 mm ausgefahren L+/2 mm extended
B10 C10
! 24
B10
DIN 71802
Dimensions
9
! 16
Type
GS-28-100 GS-28-150 GS-28-200 GS-28-250 GS-28-300 GS-28-350 GS-28-400 GS-28-450 GS-28-500 GS-28-550 GS-28-600 GS-28-650 GS-28-700 GS-28-750
16 20
18 35 M10 36
! 10
D10
20
10 20
Stroke mm 100 150 200 250 300 350 400 450 500 550 600 650 700 750
L Extended 262 362 462 562 662 762 862 962 1 062 1 162 1 262 1 362 1 462 1 562
13
C10
DIN 71752
D10
E10
9
12
24
! 10
40
!19
40
!15
DIN 648
E10
Ordering Example
43 18
GS-28-150-EE-V-1200
43
16 14
F10
M10 45
AF17 SW17
AF17 SW17
Type (Push type) Body (28 mm) Stroke (150 mm) Piston Rod End Fitting E10 Body End Fitting E10 Valve V10 Nominal Force F1 1200 N The end fittings are interchangeable. For adjustment valve add suffix -V. For mounting accessories see page 109.
F10
43
25
43
19
W10-28
Rod Shroud
! 32
U10
13 L= Hub ++40 L= Stroke 40
Adjuster Knob
V10
Adjustment Valve
GS-28
A10 C10 D10 E10 F10
Technical Data
ACE gas springs are self-contained and maintenance free. Mounting position: Can be mounted in any position but we recommend mounting with piston rod downwards so that damping is effective at end of extension stroke. End damping length: approx. 10 mm. Progression: approx. 52 %, F2 max. 3800 N. Operating temperature range: -20C to +80C (with special seals up to 200C). Operating fluid: Nitrogen gas and oil (for end damping). Available force range F1 at 20C: 100 to 2500 N. Material: Body: powder coated steel. Piston rod: hard chrome plated. End fittings: zinc plated steel. To special order: without damping, extended length damping, special force curves, special lengths, alternative end fittings.
OE10 PE10
101
Controls International Belvedere Road Newton-le-Willows WA12 0JJ Tel 01925 227171 Fax 01925 229323 E-mail info@ace-controls.co.uk
101
! 14,1
14 14thick breit
14 14 thick breit
! 14,1
End Fitting
A14
Ball Kugel 12,5 R 12,5
21 Hub Stroke 40 M14x1,5 L+/22 mm ausgefahren L+/mm extended 40
! 20 ! 40
A14
21
B14 C14
! 30
B14
DIN 71802
Dimensions
15
! 22
Type
GS-40-100 GS-40-150 GS-40-200 GS-40-300 GS-40-400 GS-40-500 GS-40-800 GS-40-1000
20 28
25 45 M14x1,5 36
!14
D14
27
15
C14
DIN 71752
14 27
D14
Ordering Example
56
!26
GS-40-150-DD-V-3500
56
E14
19 18
16
16
! 14
!20
13
18 57
30
Type (Push type) Body (40 mm) Stroke (150 mm) Piston Rod End Fitting D14 Body End Fitting D14 Valve V14 Nominal Force F1 3500 N The end fittings are interchangeable. For adjustment valve add suffix -V. For mounting accessories see page 110.
DIN 648
E14 F14
57
F14
M14x1,5
SW24 AF24
SW22 AF22
30 40 56
18
W14-40
Rod Shroud
U14
! 45
Adjuster Knob
V14
Adjustment Valve
Technical Data
GS-40
102
ACE gas springs are self-contained and maintenance free. Mounting position: Can be mounted in any position but we recommend mounting with piston rod downwards so that damping is effective at end of extension stroke. End damping length: approx. 10 mm. Progression: approx. 30 %, F2 max. 6500 N. Operating temperature range: -20C to +80C (with special seals up to 200C). Operating fluid: Nitrogen gas and oil (for end damping). Available force range F1 at 20C: 500 to 5000 N. Material: Body: powder coated steel. Piston rod: hard chrome plated. End fittings: zinc plated steel. To special order: Without damping, extended length damping, special force curves, special lengths, alternative end fittings.
102
Controls International Belvedere Road Newton-le-Willows WA12 0JJ Tel 01925 227171 Fax 01925 229323 E-mail info@ace-controls.co.uk
NEW
35
End Fitting
B24
B24
Hub Stroke 35 L+/22 mm ausgefahren L+/mm extended
! 70
Dimensions
Type
D24
50
!25
25 50 32 100
DIN 71752
D24
Ordering Example
GS-70-200-EE-8000
E24
12
! 25 ! 34 ! 42
22
Type (Push Type) Body (70 mm) Stroke (200 mm) Piston Rod End Fitting E24 Body End Fitting E24 Nominal Force F1 8000 N The end fittings are interchangeable. For mounting accessories see page 110. Standard version includes valve.
DIN 648
E24
31 30 30 94 40
94
W24-70
Rod Shroud
! 80
Technical Data
GS-70
ACE gas springs are self-contained and maintenance free. Mounting position: Can be mounted in any position but we recommend mounting with piston rod downwards so that damping is effective at end of extension stroke. End damping length: approx. 10 mm. Progression: approx. 25 %, F2 max. 16 250 N. Operating temperature range: -20C to +80C (with special seals up to 200C). Operating fluid: Nitrogen gas and oil (for end damping). Available force range F1 at 20C: 2 000 to 13 000 N. Material: Body: powder coated steel or zinc plated steel. Piston rod: hard chrome plated. End fittings: zinc plated steel. To special order: Without damping, extended length damping, special force curves, special lengths, alternative end fittings.
D24 E24
103
ND24 ME24
Controls International Belvedere Road Newton-le-Willows WA12 0JJ Tel 01925 227171 Fax 01925 229323 E-mail info@ace-controls.co.uk
103