K Morsi, AMK Esawi, S Lanka, A Sayed - Composites Part A: , 2010 - Elsevier ... uses electric current as a means to uniformly heat and simultaneously sinter and extrude ... Tensile behavior of bulk nanocrystalline aluminum synthesized by hot extrusion of ball-milled powders. ... P, Lanka S, El-Sayed A. Characterization and spark plasma sintering of mechanically ... Cited by 38 Related articles All 3 versions Cite
Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites
AMK Esawi, K Morsi, A Sayed, M Taher - Composites Science and , 2010 - Elsevier ... are sonication [5], in which the CNTs are dispersed with the matrix powders in ethanol, before being compacted and sintered, and high energy ... [16] who used spark plasma sintering and hot ... It is clear that changes in ball milling parameters significantly affect the results obtained. ... Cited by 49 Related articles All 3 versions Cite
Effect of mechanical alloying time and carbon nanotube (CNT) content on the evolution of aluminum (Al)CNT composite powders
K Morsi, A Esawi - Journal of materials science, 2007 - Springer ... welding of the aluminum particles after 3 h under the impact of the balls, individual nanotubes ... The control of particle size is important for subsequent sintering/ consolidation processes ... at the American University in Cairo for their assistance with the ball milling experiments: Abdel ... Cited by 41 Related articles All 8 versions Cite
Characterization and Spark Plasma Sintering of Mechanically Milled Aluminum-Carbon Nanotube (CNT) Composite Powders
K Morsi, AMK Esawi, P Borah, S Lanka - Journal of composite , 2010 - jcm.sagepub.com ... 52 HV for a 5.0 vol% CNT-Al composite produced by spark plasma sintering and hot extrusion (but not ball-milled). ... Characterization and Spark Plasma Sintering of Al-CNT Composite Powders ... XRD scans of spark plasma sintered specimens (Al-5 wt% CNT, and Al-2.5 wt% CNT ... Cited by 16 Related articles All 5 versions Cite
Mechanical alloying of multi-walled carbon nanotubes and aluminium powders for the preparation of carbon/metal composites
L Wang, H Choi, JM Myoung, W Lee - Carbon, 2009 - Elsevier ... Improved hardness properties of the composites, prepared by sintering the ball-milled composite mixture powders, over the sintered pure Al powders indicated the uniform dispersion of the CNT reinforcements within the Al matrix. ... Cited by 44 Related articles All 2 versions Cite
AMK Esawi, K Morsi, A Sayed, AA Gawad - Materials Science and , 2009 - Elsevier ... in order to minimize cold welding of the Al particles and also to prevent powders sticking to the balls and the jar ... [6] who used spark plasma sintering and subsequent ... Since it is well known that strain in ball-milled powders increases with milling duration [24], our milling times of 3 ... Cited by 110 Related articles All 2 versions Cite