Form-Scaff is South Africas leading supplier of formwork, falsework and scaffolding to the construction and civil engineering industries. Form-Scaff not only manufactures, hires and sells world-class products, but also provides the design skills, technical advice and support that comes with having almost 50 years experience and 30 branches locally and internationally. This indigenous expertise is complemented by the international depth and breadth of its holding company, WACO International, a leading global commercial and industrial service business focusing on the manufacturing, rental and sale of formwork, falsework and scaffolding equipment as well as the burgeoning re-locatable and modular buildings industry. WACO International operates in Africa, the UK, Australia, New Zealand and Chile. Form-Scaff is a division of WACO Africa (Pty) Ltd, a joint venture company owned by WACO International and respected local black empowerment company, Kagiso.
WACO WORLDWIDE
Australia
New Zealand
United Kingdom
South Africa
South Africa
South Africa
Australia
Disclaimer: Copyright in this catalogue vests in Form-Scaff, a division of Waco Africa (Proprietary) Limited (Form-Scaff) and extends inter alia, to the making of copies in whole or in part without the prior written consent of Form-Scaff. While every effort has been made to ensure the accuracy of the information in this catalogue, we cannot accept responsibility for any errors which may occur as a result of reliance on the contents of this catalogue and are not liable for any loss of any nature that may be incurred as a result of such reliance. Details of any of the products may change without prior notice. The customer must ensure that good practice is adopted on site by competent persons and that the products shown in this catalogue are erected, used and stripped in accordance with the relevant Codes of Practice and the OHS Act and Regulations 85 of 1993. This catalogue does not contain any design detail but lists and depicts the items available under this product range. The responsibility for design is the responsibility of the customer.
Contents
tifa
Page 2 The new generation wall Page 4 Page 6 Page 8 formwork system Panels Secondary Panels Alignment Bars, Stop-end Hooks & Levelling Jacks
Page 10 Clamps Page 11 Ties Page 12 Propping System & Working Platforms Page 14 Single Sided Walls Page 16 Lifting Page 18 Climbing
tifa-lite
Page 20 Manhandled system of choice Page 22 Panels Page 24 Secondary Panels Page 26 Alignment Bars, Stop-end Hooks & Levelling Jacks
Page 28 Clamps Page 29 Clamps & Ties Page 30 Propping System Page 31 Propping System & Working Platforms Page 32 Lifting Page 34 Climbing Page 36 Circular Formwork
tifa
The Tifa system is a new generation wall formwork solution. It is a heavy duty, crane handled system for large areas and the Panels are designed to withstand concrete pressures of up to 60kN/m2. The system is steel framed and timber-faced to produce high quality nishes. Erecting and dismantling the formwork is quick and easy. Being quick and easy, Tifa translates into real labour and hire time savings.
Rigid heavy duty hollow-section steel frame for robust site conditions.
High grade hot dip galvanising for durability/long life. Standard SA 600mm wide modules (150mm increments). Compatible with Tifa-Lite, Econo-Form as well as other European systems.
Straight and circular applications available. Gang-forms and lifting applications available. Full range of safety features. High quality 21mm WISA-Form Combi plywood facing. 60kN/m2 permissible concrete pressure.
tifa
General Assembly
Access Bracket
Tifa Panel
Levelling Jack
Push-pull Prop
Alignment Bar
Prop Tie
Panels
Tifa Panels
Tifa Panels are used to form the straight sides of concrete walls.
CODE DESCRIPTION
5110027 5110065 5110029 5110064 5105012 5105020 5105011 5105010 5105000 5105005 5105006 5105004 5105003 5105002 5105001 tifa panel 900 X 300 tifa panel 900 X 450 tifa panel 900 X 600 tifa panel 900 X 900 tifa panel 1200 X 300 tifa panel 1200 X 450 tifa panel 1200 X 600 tifa panel 1200 X 900 tifa panel 1200 X 1200 tifa panel 2700 X 300 tifa panel 2700 X 450 tifa panel 2700 X 600 tifa panel 2700 X 900 tifa panel 2700 X 1200 tifa panel 2700 X 2400
MASS(kg)
29.0 36.0 46.0 63.0 37 .0 46.0 58.0 78.0 96.0 76.0 93.0 113.0 148.0 195.0 440.0
Tifa Panels vary in size to accommodate a wide range of wall heights and lengths.
CODE DESCRIPTION
5110301 5110300 steel tie hole sleeVe 26 (21 board) PLAstic plug (21/15)
MASS(kg)
0.01 0.01
tifa
General Assembly
External Corner Panel
Fixed Clamp
Alignment Bar
Secondary Panels
External Corner Panels
Tifa External Corner Panels are used to connect two Tifa Panels together at 90o to each other at the external corners of a concrete wall.
CODE DESCRIPTION
5110028 tifa eXternal corner panel 900 5110020 tifa eXternal corner panel 1200 5110081 TIFA EXTERNAL CORNER PANEL 1500 5110006 tifa eXternal corner panel 2700
MASS(kg)
10.5 22.0 25.2 41.0
CODE DESCRIPTION
5110017 tifa internal corner panel 900 X 300 X 300 5110026 tifa internal corner panel 1200 X 300 X 300 5110025 TIFA INTERNAL CORNER PANEL 1500 X 300 X 300 5110014 tifa internal corner panel 2700 X 300 X 300
MASS(kg)
39.0 65.0 91.2 130.0
CODE DESCRIPTION
5110070 tifa hinged splaY panel 900 X 300 X 300 5105014 tifa hinged splaY panel 1200 X 300 X 300 5125021 TIFA HINGED SPLAY PANEL 1500 X 300 X 300 5110013 tifa hinged splaY panel 2700 X 300 X 300
MASS(kg)
51.0 65.0 91.0 117 .0
tifa
Ef-Ti Panels
Ef-Ti Panels are used to join Tifa Panels to Econo-Form Panels. They are xed to the Tifa Panels using Tifa Adjustable Clamps and to the Econo-Form Panels using Tee and Wedge sets.
Tifa-Lite periphery prole
CODE DESCRIPTION
5110120 5110121 5110122 Ef-ti panel 900 X 150 Ef-ti panel 1200 X 150 Ef-ti panel 2700 X 150
MASS(kg)
10.1 13.1 28.8
Econo-Form Panel punched at The Tifa Ef-Ti Panels do not have tie-holes
CODE DESCRIPTION
5110132 tifa twin profile infill 900 5110131 tifa twin profile infill 1200 5110130 tifa twin profile infill 2700
MASS(kg)
8.0 11.0 25.0
Angle Iron Lugs with holes for self tapping screws to secure the plywood facing in position
No end hammering plate on the ends of the Tifa Stripping Bar extension
CODE DESCRIPTION
5110049 tifa stripping bar 950 5110041 tifa stripping bar 1250 5110040 tifa stripping bar 1550 5110039 tifa stripping bar 2450 5110038 tifa stripping bar 2750 5110053 tifa stripping bar eXtension 900 5110052 tifa stripping bar eXtension 1200 5110082 tifa stripping bar eXtension 1500 5110051 tifa stripping bar eXtension 2400 5110050 tifa stripping bar eXtension 2700
MASS(kg)
8.5 10.5 14.6 22.0 24.5 8.1 12.1 16.0 22.0 24.5
CODE DESCRIPTION
5110015 tifa alignment bar 920 5110135 tifa alignment bar 1220 5110034 tifa alignment bar clamp
MASS(kg)
11.5 15.3 1.9
Stop-end Hooks
Tifa Stop-end Hooks are used to secure the Tifa Alignment Bars in position when the Alignment Bars are used to support the stop-end of a concrete wall.
CODE DESCRIPTION
5110206 tifa stop-end hook
MASS(kg)
1.1
Dywidag Combi Nuts or Tifa Wing Nuts complete with Washer may be used with the Stop-end Hook
Levelling Jacks
Tifa Levelling Jacks are used to level the bottom edge of Tifa Panels along their length. They are attached to the Tifa Panels using the Alignment Bar Clamps.
CODE DESCRIPTION
5110203 tifa leVelling jack
MASS(kg)
10.5
tifa
Application - Stop-ends
Tifa Panel
Levelling Jack
Tifa Alignment Bar is clamped over the Panel joint to keep the Panels in a straight line
Clamps
Fixed Clamps
Tifa Fixed Clamps are used to x two Tifa Panels together.
CODE DESCRIPTION
5110001 tifa fiXed clamp
MASS(kg)
3.7
Adjustable Clamp
Tifa Adjustable Clamps are used to x Tifa Panels together where Stripping Bars or an inll is used between the Panels. They are also used to clamp the External Corner Panels, Internal Corner Panels and Hinged Splay Panels into position.
CODE DESCRIPTION
5110004 tifa adjustable clamp
MASS(kg)
6.3
Tifa-Euro Clamp
Tifa-Euro Clamps are used to connect Tifa Panels to other European Systems.
CODE DESCRIPTION
5110250 tifa-euro clamp
MASS(kg)
5.3
10
Ties
Ties
15mm Diameter Dywidag Bars with Dywidag Combi Nuts or Tifa Wing Nuts complete with Washers are to be used with the Tifa System.
Dywidag Bar
tifa
CODE DESCRIPTION
5405077 dYwidag bar 15mm 500 5405078 dYwidag bar 15mm 1000 5405079 dYwidag bar 15mm 1500 5405085 dYwidag bar 15mm 2000 5405086 dYwidag bar 15mm 2500 5405087 dYwidag bar 15mm 3000 5405088 dYwidag bar 15mm 3500 5405089 dYwidag bar 15mm 4000 5405092 dYwidag bar 15mm 4500 5405093 dYwidag bar 15mm 5000 5405094 dYwidag bar 15mm 5500 5405095 dYwidag bar 15mm 6000 5110032 tifa wing nut 5110035 washer 100 X 100 X 6 5110150 dYwidag combi nut
MASS(kg)
0.7 1.5 2.2 2.9 3.6 4.3 5.1 5.8 6.5 7 .2 8.0 8.7 1.8 0.5 1.2
CODE DESCRIPTION
5125028 tifa top tie bracket
MASS(kg)
1.8
Application - Ties
Dywidag Bar complete with Combi Nut Top Tie Bracket Dywidag Bar complete with Combi Nut
CODE DESCRIPTION
5110012 tifa prop connecting bracket
MASS(kg)
2.5
CODE DESCRIPTION
5110057 tifa prop connecting bracket hd
MASS(kg)
5.0
Swivel Foot
The Tifa Swivel Foot is used at the base of the Push-pull Props and Prop Ties to connect the ends of the Props together.
CODE DESCRIPTION
5110008 tifa swiVel foot 200 X 150 5110021 Tifa swiVel foot 300 X 250
MASS(kg)
3.4 7.6
CODE DESCRIPTION
5110090 tifa connecting pin 16 X 90 5110059 r-clip
MASS(kg)
0.2 0.01
12
tifa
Push-pull Props and Prop Ties
Tifa Push-pull Props and Tifa Prop Ties are used to plumb the Tifa Panels.
CODE DESCRIPTION
5110100 tifa prop tie 5110007 tifa push-pull prop 2500 5110024 tifa push-pull prop 3100 5110201 tifa push-pull prop 4200 5110022 tifa push-pull prop 5700
MASS(kg)
8.4 14.0 16.6 20.0 63.3
Waler Brackets
Tifa Waler Brackets are used to x the scaffold tube to the Tifa Panels. The Tifa Waler Brackets hook onto the 16mm diameter attachment pins located in the Tifa Panels.
CODE DESCRIPTION
5110110 tifa waler bracket
MASS(kg)
2.0
Access Brackets
Tifa Access Brackets are used to provide access for site personnel. Tifa Access Brackets are not to be used as a loading platform.
CODE DESCRIPTION
5110010 tifa access bracket
MASS(kg)
12.0
CODE DESCRIPTION
5110087 tifa support frame 3700 5110088 tifa support frame eXtenSion 1900
MASS(kg)
300.0 150.0
The shutter is plumbed using the built-in Tifa Support Frame Plumbing Jack (240mm max. adjustment)
CODE DESCRIPTION
5110123 tifa hd waler hook bolt 5110150 DYWIDAG COMBI WING NUT
MASS(kg)
2.0 1.14
CODE DESCRIPTION
5110091 tifa support frame hd waler 1200 5110089 tifa support frame hd waler 2400
MASS(kg)
28.0 55.0
14
tifa
Application - Single Sided Tifa
Tifa Panel Tifa Support Frame 3700
Tifa Support Frame Extension 1900 Tifa Support Frame Plumbing Jack
Lifting
Lifting Hooks
The Tifa Lifting Hook is used to lift the Tifa system and must preferably be used in conjunction with the Tifa Lifting Beam.
CODE DESCRIPTION
5110018 tifa lifting hook
MASS(kg)
7.7
Lifting Beams
Tifa Lifting Beams are preferably used in conjunction with the Tifa Lifting Hooks and chain slings to lift the Tifa System.
Two top lifting lugs are tted with D shackles for the crane slings
CODE DESCRIPTION
5110093 Tifa lifting beam 3300 c/w chains
MASS(kg)
175.0
Six lug positions, at a spacing of 600mm, to locate the two vertical (1250mm long) chain slings that are provided with each Lifting Beam
A gravity lock ensures that they are safely xed to the periphery of the Tifa Panels
16
tifa
Application - Lifting
Crane Sling
Tifa Panel
Alignment Bar
Contact your nearest Form-Scaff branch for information about lifting the Tifa system
Climbing
Anchor Screws
Anchor Screws are used to keep the Form Wall Brackets in position.
Hole for the grade 8.8 set screw
CODE DESCRIPTION
2965901 ANCHOR SCREW 120 2965902 anchor sCrew 200 2965903 anchor sCrew 280 2965904 ANCHOR SCREW 430
MASS(kg)
0.58 1.0 1.1 4.0
CODE DESCRIPTION
5110099 form wall bracket
MASS(kg)
3.9
CODE DESCRIPTION
5405023 form support bracket
MASS(kg)
25.7
handrails here
CODE DESCRIPTION
5405024 form hanging bracket
MASS(kg)
Attach the safety
23.9
18
tifa
Application - Climbing
Push-pull Prop
Tifa Panel
Form Hanging Bracket with safety handrail Form Support Bracket with safety handrail
tifa-lite
Tifa-Lite is the system of choice for manhandled formwork. With less components than traditional Econo-Form panels, Tifa-Lite will save you time and effort on formwork assembly. The high quality WISA-Form plywood delivers superior nishes. 1200 / 1500 / 2700 height modules
System Features
Lightweight hollow-section steel frame for easy handling. High grade hot dip galvanising for durability/long life. Standard SA 600mm wide modules (150mm increments). Compatible with Tifa, Econo-Form as well as other European systems. Straight and circular applications available. Gang-forms and lifting applications available. Full range of safety features. High quality 15mm WISA-Form plywood. 60kN/m2 permissible concrete pressure.
20
tifa-lite
General Assembly
Push-pull Prop
Crab Clamp
Swivel Foot
Panels
Panels
Tifa-Lite Panels are used to form the straight sides of concrete walls.
The Tifa-Lite Panels vary in size to accommodate a wide range of wall heights and lengths.
CODE DESCRIPTION
5110302 5110300 steel tie hole sleeVe 21 (15 board) PLAstic plug (21/15)
MASS(kg)
0.01 0.01
22
tifa-lite
Tifa-Lite Panel
Crab Clamp
Secondary Panels
External Corner Panels
External Corner Panels are used to connect two Tifa-Lite Panels together at 90o to each other at the external corners of a concrete wall.
CODE DESCRIPTION
5110028 tifa eXternal corner panel 900 5110020 TIFA EXTERNAL CORNER PANEL 1200 5110081 tifa eXternal corner panel 1500 5110006 tifa eXternal corner panel 2700
MASS(kg)
10.5 22.0 25.2 41.0
CODE DESCRIPTION
5110017 Tifa internal corner panel 900 X 300 X 300 5110026 tifa internal corner panel 1200 X 300 X 300 5110025 tifa internal corner panel 1500 X 300 X 300 5110014 tifa internal corner panel 2700 X 300 X 300
MASS(kg)
39.0 65.0 91.00 130.0
CODE DESCRIPTION
5110070 tifa hinged splaY panel 900 X 300 X 300 5105014 tifa hinged splaY panel 1200 X 300 X 300 5125021 TIFA HINGED SPLAY PANEL 1500 X 300 X 300 5110013 tifa hinged splaY panel 2700 X 300 X 300
MASS(kg)
51.0 65.0 91.0 117.0
24
tifa-lite
Ef-Ti Panels
Ef-Ti Panels are used to join Tifa-Lite Panels to Econo-Form Panels. They are xed to the Tifa-Lite Panels using Tifa-Lite Fixed Clamps and to the Econo-Form Panels using Tee and Wedge sets.
Tifa-Lite periphery prole
CODE DESCRIPTION
5110120 5110121 5110122 Ef-ti panel 900 X 150 Ef-ti panel 1200 X 150 Ef-ti panel 2700 X 150
MASS(kg)
10.1 13.1 28.8
CODE DESCRIPTION
5110132 tifa twin profile infill 900 5110131 tifa twin profile infill 1200 5110083 tifa twin profile infill 1500 5110130 tifa twin profile infill 2700
MASS(kg)
8.0 11.0 13.8 25.0
Angle Iron Lugs with holes for self tapping screws to secure the plywood facing in position
No end hammering plate on the ends of the Tifa Stripping Bar extension
CODE DESCRIPTION
5110049 tifa stripping bar 950 5110041 tifa stripping bar 1250 5110040 tifa stripping bar 1550 5110039 tifa stripping bar 2450 5110038 tifa stripping bar 2750 5110053 tifa stripping bar eXtension 900 5110052 tifa stripping bar eXtension 1200 5110082 tifa stripping bar eXtension 1500 5110051 tifa stripping bar eXtension 2400 5110050 tifa stripping bar eXtension 2700
MASS(kg)
8.5 10.5 14.6 22.0 24.5 8.1 12.1 16.0 22.0 24.5
CODE DESCRIPTION
5110015 tifa alignment bar 920 5110135 tifa alignment bar 1220 5110034 tifa alignment bar clamp
MASS(kg)
11.5 15.3 1.9
Stop-end Hooks
Tifa Stop-end Hooks are used to secure the Tifa Alignment Bars in position when the Alignment Bars are used to support the stop-end of a concrete wall.
CODE DESCRIPTION
5110206 tifa stop-end hook
MASS(kg)
1.1
Dywidag Combi Nuts or Tifa Wing Nuts complete with Washer may be used with the Stop-end Hook
Levelling Jacks
Tifa-Lite Levelling Jacks are used to level the bottom edge of Tifa-Lite Panels along their length.
CODE DESCRIPTION
5125035 tifa-lite leVelling jack
MASS(kg)
8.0
26
tifa-lite
Application - Stop-ends
Tifa-Lite Panel
Stop-end Hook
Clamps
Fixed Clamps
Tifa-Lite Fixed Clamps are used to x two Tifa-Lite Panels together.
CODE DESCRIPTION
5125010 tifa-lite fiXed clamp
MASS(kg)
4.4
Adjustable Clamp
Tifa-Lite Adjustable Clamps are used to x Tifa-Lite Panels together where Stripping Bars or an inll is used between the Panels. They are also used to clamp the External Corner Panels, Internal Corner Panels and Hinged Splay Panels into position.
CODE DESCRIPTION
5125019 tifa-LITE adjustable clamp
MASS(kg)
6.4
CODE DESCRIPTION
5125034 tifa-Lite crab clamp
MASS(kg)
1.7
28
tifa-lite
CODE DESCRIPTION
5110250 tifa euro clamp
MASS(kg)
5.3
Ties
15mm Diameter Dywidag Bars with Dywidag Combi Nuts or Tifa Wing Nuts complete with Washers are to be used with the Tifa System.
Dywidag Bar
CODE DESCRIPTION
5405077 dYwidag bar 15mm 500 5405078 dYwidag bar 15mm 1000 5405079 dYwidag bar 15mm 1500 5405085 dYwidag bar 15mm 2000 5405086 dYwidag bar 15mm 2500 5405087 dYwidag bar 15mm 3000 5405088 dYwidag bar 15mm 3500 5405089 dYwidag bar 15mm 4000 5405092 dYwidag bar 15mm 4500 5405093 dYwidag bar 15mm 5000 5405094 dYwidag bar 15mm 5500 5405095 dYwidag bar 15mm 6000 5110032 tifa wing nut 5110035 washer 100 X 100 X 6 5110050 dYwidag combi nut
MASS(kg)
0.7 1.5 2.2 2.9 3.6 4.3 5.1 5.8 6.5 7.2 8.0 8.7 1.8 0.5 1.2
CODE DESCRIPTION
5125028 tifa top tie bracket
MASS(kg)
1.8
Propping System
Push-pull Props and Prop Ties
Tifa Push-pull Props and Tifa Prop Ties are used to plumb the Tifa-Lite Panels.
CODE DESCRIPTION
5110100 tifa prop tie 5110007 tifa push-pull prop 2500 5110024 tifa push-pull prop 3100 5110201 tifa push-pull prop 4200
MASS(kg)
8.4 14.0 16.6 20.0
Swivel Foot
The Tifa Swivel Foot is used at the base of the Push-pull Props and Prop Ties to connect the ends of the Props together.
CODE DESCRIPTION
5110008 tifa swiVel foot 200 X 150
MASS(kg)
3.4
CODE DESCRIPTION
5110090 TIFA CONNECTING PIN 16 X 90 5110059 R-clip
MASS(kg)
0.1 0.01
Pin R-Clip
30
tifa-lite
CODE DESCRIPTION
5125029 tifa-lite prop connecting bracket (stiffener TYpe)
MASS(kg)
1.3
Waler Brackets
Tifa Waler Brackets are used to x the scaffold tube to the Tifa-Lite Panels. The Tifa Waler Brackets hook onto the 16mm diameter attachment pins located in the Tifa-Lite Panels.
CODE DESCRIPTION
5110110 tifa waler bracket
MASS(kg)
2.0
Access Brackets
Tifa-Lite Access Brackets are used to provide access for site personnel.
CODE DESCRIPTION
5125027 tifa-lite access bracket
MASS(kg)
14.1
Lifting
Lifting Hooks
The Tifa-Lite Lifting Hook is used to lift the Tifa-Lite system and must preferably be used in conjunction with the Tifa Lifting Beam.
CODE DESCRIPTION
5125023 tifa-lite lifting hook
MASS(kg)
3.3
Lifting Beams
Tifa Lifting Beams are preferably used in conjunction with the Tifa-Lite Lifting Hooks to lift the Tifa-Lite System.
Two top lifting lugs are tted with D shackles for the crane slings
CODE DESCRIPTION
5110093 Tifa lifting beam 3300 c/w chains
MASS(kg)
175.0
Six lug positions, at a spacing of 600mm, to locate the two vertical (1250mm long) chain slings that are provided with each Lifting Beam
Gravity Pin
32
tifa-lite
Application - Lifting
Tifa-Lite Panel
Contact your nearest Form-Scaff branch for information about lifting the Tifa-Lite system
Climbing
Anchor Screws
Anchor Screws are used to keep the Form Wall Brackets in position.
Hole for the grade 8.8 set screw
CODE DESCRIPTION
2965902 anchor sCrew 200 2965903 anchor sCrew 280
MASS(kg)
1.0 1.1
CODE DESCRIPTION
5110099 form wall bracket
MASS(kg)
3.9
CODE DESCRIPTION
5405023 form support bracket
MASS(kg)
25.7
handrails here
CODE DESCRIPTION
5405024 form hanging bracket
MASS(kg)
Attach the safety
23.9
34
tifa-lite
Application - Climbing
Tifa-Lite Panel
Circular Formwork
Flex Panels
Tifa-Lite Flex Panels are used to form radiused concrete walls.
CODE DESCRIPTION
5125016 tifa-lite fleX panel 1200X200 5125015 tifa-lite fleX panel 1200X250 5125014 tifa-lite fleX panel 1200X300 5125007 tifa-lite fleX panel 1500X200 5125008 tifa-lite fleX panel 1500X250 5125009 tifa-lite fleX panel 1500X300 5125033 tifa-lite fleX panel 2700X200 5125026 tifa-lite fleX panel 2700X250 5125025 tifa-lite fleX panel 2700X300
MASS(kg)
14.0 15.0 16.0 16.4 17.6 18.8 26.8 29.0 31.2
Flex Walers
Tifa-Lite Flex Walers are located over each tie hole in the Flex Panels. The tie is located through the opening in the Waler.
CODE DESCRIPTION
5125011 tifa-lite fleX waler
MASS(kg)
8.9
Tifa-Lite Flex Panels are xed to the Tifa-Lite Panels using Tifa-Lite Crab Clamps
36
Contact Details
HEAD OFFICE
P .O. Box 669, Isando, 1600 181 Barbara Road, Elandsfontein Tel 011 842-4000, Fax 011 842-4280 RUSTENBURG P .O. Box 6996, Rustenburg, 0300 3 Ferro Street, Rustenburg Tel 014 538-2540, Fax 014 538-0087 SECUNDA P .O. Box 3781, Secunda, 2302 1 Winkelhaak Road, McGill Ext, Evander Tel 017 632-4230, Fax 017 632-4234 VEREENIGING P .O. Box 1010, Vereeniging, 1930 Cnr Telford & Van Riebeeck Street, Duncanville Tel 016 455-1611, Fax 016 455-1566 WITBANK P .O. Box 3869, Witbank, 1035 2 Colliery Street, Witbank Tel 013 690-2833, Fax 013 656-3713 PIETERMARITZBURG P .O. Box 21946, Mayors Walk, 3208 Market Road Ext, Mkondeni Tel 033 346-1767 , Fax 033 346-1753 PORT ELIZABETH P .O. Box 2112, North End, 6056 4 Kendle Street, Neave Industrial Area Tel 041 453-2317 , Fax 041 453-2524 RICHARDS BAY P .O. Box 1333, Richards Bay, 3900 111 Aluminia Alley, Alton Industrial North Tel 035 751-1140, Fax 035 751-1094 STRAND P .O. Box 1654, Somerset West, 7129 Chilwan Crescent, Helderberg Industrial Park Tel 021 845-4090, Fax 021 845-4091
INLAND BRANCHES
BLOEMFONTEIN P .O. Box 6610, Bloemfontein, 9300 22 Wilhelm Kotze Street, Ooseinde Tel 051 432-5555, Fax 051 432-4477 BURGERSFORT P .O. Box 2918, Burgersfort, 1150 Plot 2484, Ext 23 Dirk Winterbach Street, Burgersfort Tel 013 004-0200 JOHANNESBURG EAST P .O. Box 26994, Boksburg, 1462 Tunney Road, Gate 3, Elandsfontein Tel 011 842-4215, Fax 011 842-4111 JOHANNESBURG - KYA SAND P .O. Box 2884, Honeydew, 2040 40 Homestead Avenue, Kya Sand Tel 011 708-2227 , Fax 011 708-1159 KATHU P .O. Box 1235, Kathu, 8446 33 Kalk Street, Industrial Area, Kathu Tel 053 723-2194, Fax 053 723-1078 KUSILE P .O. Box 4466, Pretoria, 0001 Kusile Power Station, Balmoral Road, Mpumalanga Tel 082 578-4638 LEPHALALE P .O. Box 7495, Onverwaght, 0557 Rietspruit Plot 23, Portion 46 Witkop Road, Lephalale Tel 014 763-7982, Fax 014 763-7982 NELSPRUIT P .O. Box 4485, Nelspruit, 1200 Erf 379, Rocky Drift Tel 013 758-1036, Fax 013 758-1063 POLOKWANE P .O. Box 3979, Polokwane, 0700 62 Goud Street, Laboria, Polokwane Tel 015 293-0450, Fax 015 293-0460 PRETORIA P .O. Box 4466, Pretoria, 0001 Park Lane North, Highway Business Park, Rooihuiskraal Tel 012 621-9900, Fax 012 621-9931
COASTAL BRANCHES
BALLITO P .O. Box 715, Umhlali, 4390 Labora Terra Industrial Park, Shakas Rock Road, Ballito Tel 032 947-9430, Fax 032 947-0583 CAPE TOWN P .O. Box 37068, Chempet, 7442 6 Drill Avenue, Montague Gardens Tel 021 528-6500, Fax 021 551-1743 DURBAN SOUTH P .O. Box 485, Umbogintwini, 4120 16 Stroude Place, Isipingo Tel 031 902-2677 , Fax 031 902-2771 EAST LONDON P .O. Box 2734, Beacon Bay, 5205 5 Ray Craib Crescent, Beacon Bay Tel 043 748-2558, Fax 043 748-3691 GEORGE P .O. Box 218, Hartenbos, 6520 Cnr Albert Street & Bridge Road, George Tel 044 695-0294, Fax 044 695-1040 KZN REGIONAL OFFICE P .O. Box 33, New Germany, 3620 178-180 Old Main Road, Pinetown Tel 031 713-9700 Fax 031 713-9715 MARGATE P .O. Box 1171, Margate, 4275 Industrial Road, Margate Tel 039 317-1708, Fax 039 317-4073 NEWCASTLE P .O. Box 906, Newcastle, 2940 22 Schonland Street, Industrial Sites Tel 034 375-7697 , Fax 034 375-6935
INTERNATIONAL BRANCHES
CHILE - COPIAPO Rio Copiapo, 1949 Plaza Comercio 2, Modulo 8 Panamericana Norte, Copiapo, Chile Tel +565 254 1561 CHILE - SANTIAGO Cerro Portezuelo, 9801 Parque Industrial Portezuelo, Quilicura, Santiago de Chile Tel +562 738-5019 Fax +562 738-6521 GHANA - ACCRA Plot L16, Accra Tema Motorway, Off Spintex Road, Motorway Industrial Area, Accra, Ghana Cell +27 82 829 6627 MAURITIUS - PORT LOUIS P .O. Box 748, Bell Village, Port Louis Western Plaine Lauzun Industrial Estate Tel +230 211-0391 Fax +230 211-0392 NAMIBIA - SWAKOPMUND P .O. Box 2484, Swakopmund, 36 Hidipo Hamutenya Street, Swakopmund Tel +26464 46-2020 Fax +26464 46- 2050 NAMIBIA - WINDHOEK P .O. Box 20286, Windhoek, 9000 5 Nickel Street, Prosperitas Tel +26461 23-3693 Fax +26461 23-3272