BH Series BT Series
Cast Steel High Pressure Valves - BH Series Gate Valve - BH5 Series
These valves, by virtue of the venturi-type flow path, offer the combined advantages of maximum flow efficiency and ease of operation. These are meant for high pressure-high temperature applications and are available in Carbon steel and Alloy steel materials. While the stems of carbon steel valves are of 13% chromium stainless steel, those of alloy steel valves are made from 16% chromium special stainless steel, for high temperature and anti-corrosion properties. The wedges are of two piece construction held together by a pin, offering flexibility. This combined with the mirror finish lapping ensures perfect sealing and compensates for wear in the long run. These valves are provided with pressure seal (self-seal) bonnet to provide better third port seal. Thrust ball bearings enable the valve to be operated with minimum effort.
Contd...
Cast Steel High Pressure Valves - BH Series Gate Valve BH5 Series - Application
These Valves find their application in high pressure and high temperature lines where the end connections are to be made by butt-welding. It is recommended for on/off services ; and the media to be handled are water, oil, gas, steam or other non-corrosive ones.
Rising Stem Easily visible open-close indication. Yoke Bush Furnished in aluminium bronze material. Large sizes are provided with yoke bush along with ball bearings. Eye Bolts Facilitate easier maintenance and packing replacement.
Handwheel Large hand wheels for easy operation. Also available with gearing and motor actuators for more difficult services. Grease Nipple Yoke Bush equipped with fittings to minimise wear and operating torque. Self Seal Bonnet
Stuffing Box Deep stuffing box provides maximum packing for stem seal. Seat Rings Seal welded heavy duty controlled seat width to provide maximum sealing force.
Stem Precision ground stem enables smooth operation and ensures leak tightness in gland. Wedge Heavy-pattern fully guided wedge precision fitted to body seats for maximum shut off. Flexible design. Back to page
Body Heavy duty body with sufficient wall thickness for maximum service life. Provided with bosses for optional bypasses or drains.
Cast Steel High Pressure Valves - BH Series Gate Valve BH5 Series - Dimensions
D
Z
Contd...
H - DISMANTLING CLEARANCE
Rising Stem Easily visible open-close indication. Yoke Bush Furnished in aluminium bronze material. Large sizes are provided with yoke bush along with ball bearings. Eye Bolts Facilitate easier maintenance and packing replacement.
Handwheel Large hand wheels for easy operation. Also available with gearing and motor actuators for more difficult services. Grease Nipple Yoke Bush equipped with fittings to minimise wear and operating torque. Self Seal Bonnet
Stuffing Box Deep stuffing box provides maximum packing for stem seal. Seat Rings Seal welded heavy duty controlled seat width to provide maximum sealing force.
Stem Precision ground stem enables smooth operation and ensures leak tightness in gland. Wedge Heavy-pattern fully guided wedge precision fitted to body seats for maximum shut off. Flexible design. Back to page
Body Heavy duty body with sufficient wall thickness for maximum service life. Provided with bosses for optional bypasses or drains.
Cast Steel High Pressure Valves - BH Series Gate Valve BH5 Series - Materials
D
Z
11 06
Model No.BH515A0
Item No. Part Name 01 02 03 04 05 06 07 08 09 10 11 Body Seat Ring Wedge Stem Bonnet Yoke Gasket Packing Stud Nut Handwheel A216 - WCB A216 - WCB CS+Stellite CS+Stellite A182 F6a CL3 CS A216 - WCB Grafoil Grafoil A 193 B7 A 194 2H CS A217 - WC6 A217 - WC9 A217- WC6 AS+Stellite AS+Stellite Ohtaron A182F22 A216 - WCB Grafoil Grafoil A 193 B16 A 194 GR4 CS A217 - WC9 AS+Stellite AS+Stellite Ohtaron A182F22 A216 - WCB Grafoil Grafoil A 193 B16 A 194 GR4 CS
08 09
V
10 05 07 01 02 03
Contd...
H-DISMANTLING CLEARANCE
04
Cast Steel High Pressure Valves - BH Series Technical Description of Standard Valves