t s e g Big
Yet!
www.panavision.co.uk
Contact Numbers
Grip
Grips Mark Furssedonn Mobile: +44 (0)7710 313102 mark.furssedonn@panavision.co.uk Alan Wole Smith Mobile: +44 (0)7879 486164 alan.smith@panavision.co.uk Alan Moffatt Tel: +44 (0)20 8839 7392 Mobile: +44 (0)7710 725667 alan.moffatt@panavision.co.uk Gary Godkin Mobile: +44 (0)7710 725668 gary.godkin@panavision.co.uk
Camera
Features Charlie Todman Mobile: +44 (0)7860 502040 charlie.todman@panavision.co.uk Commercials Tony Samuels Mobile: +44 (0)7776 170788 tony.samuels@panavision.co.uk Television Dean Oram Mobile: +44 (0)7957 258412 dean.oram@panavision.co.uk
Panavision Ireland
John Higgins Mobile: +35 3872568410 john@panavision.ie
Technical Specication Manual for all Camera Cranes, Dollies, Remote Systems & Motorised Crane Bases.
To all our valued Friends, This latest edition of the long running Red Book has been produced for your convenience in an electronic format and is downloadable from our website at www.panavision.co.uk It has been divided into six separate sections in order to provide help when ordering and selecting equipment. For a full price list and details of all other items we have available please contact any of our Branches listed on Page 69/70 You will also notice that for the 1st time we have included website links to various manufacturer websites which we hope you will nd helpful? All equipment is supplied as per Panavisions terms & conditions of business, a copy of which is available on request. Panavision is unable to guarantee exact weights and dimensions of some items as they are hand built and specications vary. Whilst every effort has been made to ensure the accuracy of this technical manual, Panavision cannot be held responsible for the consequences of any errors or omissions. As always thank you for your fantastic support thus far, we look forward to working with you for many years to come. Mark Furssedonn-August 2011
INDEX
Section 1 Camera Dollies Section 2 Camera Cranes Section 3 Small Cranes and Jib Arms Section 4 Remote Systems & Accessories Page 4
19
34
56
Section 5 Underwater Remote Heads & Housings 65 Section 6 Motorised Crane Bases
67
Chapman Leonard J.L Fisher Inc Ronford Baker Panther GMBH Floatcam Movietech GMBH Panther GMBH Supertechno Moviebird GFM GMBH Strada Unlimited
GFM GMBH Straight Shootr Egripment BV J.L Fisher Inc Aerocrane MAT GMBH (Towercams only) Servicevision A & C Limited Louma UK Hydroex
Chapman
Hybrid Dolly MKIII
Low lens setup with HYBRID drop down attachment (measured to camera base from ground) Maximum boom travel Maximum height without riser Carrying capacity of camera plate (extended 24 in any direction from the HYBRID base plate) Maximum boom lifts (fully charged) Chassis maximum length (wheels fully extended) Chassis minimum length (wheels fully retracted) Minimum chassis height for transportation Chassis variable widths legs in legs at track position legs at 45 legs at 90 Steering post height Minimum turn radius Minimum width door Hybrid can be carried through Carrying weight 68.5cm 74.9cm 88.9cm 99.0cm 91.4cm 95.2cm 45.7cm 179.1kg 27.0 29.5 35.0 39.0 36.0 37.5 18.0 395.0lbs 2.5cm 111.7cm 166cm 226.8kg 6 lifts 137.1cm 116.8cm 45.7cm 54.0 46.0 18.0 Pneumatic tyres & soft tyres are available for the Hybrid 1.0 44.0 5 5 500.0lbs
Hybrid Standard Accessories 1 x heating system 1 x mains cable 2 x side platforms 1 x front platform 1 x standing platform 1 x battery tray 1 x 24 camera extension plate 1 x 16 camera extension plate 1 x 6 camera riser 1 x 12 camera riser 1 x seat offset
1 x 12 seat riser 2 x seat assemblies 1 x wrench 2 x long carry bars 2 x medium carry bars 2 x short carry bars 2 x short push posts 1 x hydraulic handle 1 x four way leveller 1 x nose L plate 1 x steering column
Hustler IV
Camera mount height (without Risers) Camera mount height (with standard 12 Riser) Minimum camera mount height (without Risers) Minimum camera mount height (with standard 12 Riser) Minimum camera mount height (w/ 90 degree plate) Vertical travel *Maximum payload with accumulator charge at 3,300 psi Maximum Boom lifts (fully charged at 3,300 psi) Chassis length Chassis width Steering post height Front deck height Rear deck height Minimum deck height for transportation Minimum turn radius (round mode) Minimum turn radius (conventional mode) Accumulator charging time (110 A.C. and D.C.) Accumulator charging time (Hand Pump) Carrying weight Operational weight (w/o payload) 150cm 180cm 48cm 78cm 5cm 1.06m 341kg 6 Lifts 130cm 70cm 103cm 32cm 43cm 50cm 71cm 120cm 51 27.5 40.75 12.75 17 19.5 28 46 60 72 18 30.75 2 42 750lb. The Sliding Sideboard System with both high and low positions. This allows a variety of positions for the sideboards, i.e. all the way forward or all the way back, without removing or changing the boards.
Maximum camera mount height (position 4 - extender mode) 1.5m Maximum Boom travel (position 4-extender mode) Minimum camera mount height (low bar setup) Maximum camera mount height (low bar setup) Maximum load capacity Maximum number of lifts on a single charge Accumulator charging time (empty to full) Carrying weight 1m 2.2cm 86.7cm 136kg 5 60sec. 131kg
295lbs.
Pee Wee MKIV accessories include 1 x accessory cart 4 x lifting bars 1 x 12 camera riser 1 x 24 camera riser 1 x tracking bar 2 x seat risers 1 x front MI board 1 x standing board 1 x left & right support boards 1 x upper left & right support boards 1 x left & right rear extension boards
1 x left & right side boards 1 x low plate 1 x left & right full side boards 4 x full ller plates 1 x left & right MI boards 2 x star plates 1 x seat offset arm 2 x seats 1 x lower left front board 1 x upper front board 1 x battery holder
Pneumatic tyres & soft tyres are available for the Pee Wee MKIV
Pneumatic tyres & soft tyres are available for the Pee Wee For more information CLICK HERE
MKII
Fisher Dollies
Fisher 10
Maximum lift beam elevation Minimum lift beam elevation Minimum lift beam elevation with low boy Maximum beam travel Lift beam capacity Lifts per system charge Length Width fully operational steering - wheels in Width fully operational steering - wheels out Height - operating Height - folded Minimum turn radius- round steering Minimum turn radius - conventional Carrying Weight 160cm 41cm 14cm 118cm 227kg 7 137cm 68cm 81cm 98cm 63cm 56cm 112cm 190kg 54 26.6 32 38.5 25 22 44 420lbs 63 16.5 5.5 47 500lbs Fisher 10 Standard Accessories 1 x mains cable 2 x front board 2 x high side boards 2 x low side boards 2 x diving boards 2 x standing boards 1 x seat offset 1 x 6 seat rise 2 x seat assemblies 1 x 6 camera riser 1 x 12 camera riser 1 x 10 camera extension plate 1 x 24 camera extension plate 2 x push bar bracket 1 x push bar 2 x push posts 2 x regular carry handles 1 x set track run ups 4 x track wheels 1 x battery rack 1 x knee bumper with allen wrench & 2 pins 1 x low level head 1 x standard level head 1 x set track wheels
Fisher 11
Maximum lift beam elevation Minimum lift beam elevation Minimum lift beam elevation with low boy Vertical beam travel Lift beam capacity Lifts per system charge Length Width fully operational steering - wheels in Width fully operational steering - wheels out Height - operating Height - folded Minimum turn radius- round steering Minimum turn radius - conventional Carrying weight 131 cm 44cm 9cm 86cm 91kg 6 114cm 52cm 65cm 101cm 59cm 41cm 85cm 145kg 44.75 20.5 25.75 39.5 23.25 16 33.5 320lbs 51.5 17.5 3.5 34 200lbs
Fisher 11 Standard Accessories 1 x mains cable 2 x low side boards 2 x high side boards 2 x front boards 1 x front board bridge 2 x diving boards 1 x seat offset high 1 x 6 seat riser 2 x seat assemblies 1 x 6 camera riser 1 x 12 camera riser 1 x 10 camera extension plate 1 x 24 camera extension plate 2 x regular carry handles 2 x short carry handles 2 x push bar brackets 1 x push bar 1 x set track ramps 4 x track wheels 1 x battery rack 1 x knee bumper with allen wrench & 2 pins 1 x low levelling head 1 x standard levelling head 1 x set track wheels
Dolly Driver
Dolly Driver: Height Width Depth Weight Smart Charger: Height Width Depth Weight 9.2cm 11.75cm 21.0cm 2.73kg 3 5/8 4 5/8 8 6 lb 15.24cm 40cm 15.24cm 8.2kg 6 16 6 18lb
Rechargeable power source used for charging the lift beam on all mains rechargeable Dollies.
n Portable power for remote use n Compact and lightweight n Charges the lift beam faster than A.C. n Up to 100 lift cycles without recharging n Smart charger and cables included n Full recharge in about 3 hours n Indicator lights show charging status n Automatic cut-off and standby mode The DOLLY DRIVER is a portable A.C. power source that lets you recharge the lift beam numerous times when no A.C. outlet is available. The DOLLY DRIVER has enough power to recharge the lift beam system up to 16 times on some Dollies. The DOLLY DRIVER kit comes with a NiMH Smart Charger and all the necessary cables to recharge the DOLLY DRIVER in about 3 hours (or less, if not fully discharged). Nimh Smart Charger Included Combining advanced electronic design and a microprocessor controlled brain together with the latest in power control technology, the result is a unique, compact, advanced battery charger capable of delivering an exceptionally high rate of charge with no fear of damage to the battery. The NiMH Smart Charger is easy to use and virtually automatic in operation. Irrespective of the level of charge remaining in the battery, the NiMH Smart Charger will recharge the battery at a rapid rate; when the battery is fully charged, the charger will carry on at a reduced Top-up rate, this will ensure that the battery is 100% fully charged. You can leave the battery connected to the charger without fear of damage. Top-up charge will ensure that the battery is ready for use at a moments notice.
10
Slider
Available in various sizes
Lighter, stronger materials and new technology in slider bearings have allowed the development of one of the most versatile new camera mounting devices to come along in many years, The Slider. The Slider provides the means of mounting a camera on a track that offers camera operators more control and exibility in camera positioning with less movement of the camera platform. The camera can be easily repositioned and can be rotated on a 360 degree axis by the camera operator. The Slider is built for ease of setup and enables a camera operator to achieve tight camera shots without disrupting production for dolly movement, thus saving valuable production time. The advanced technology bearings used on the Slider allow an operator to silently adjust camera position and angle without interrupting lming. The advanced technology bearings are smooth enough to allow the camera operator to control camera movement by simply moving his head while looking into the camera eyepiece.
11
The VacuRigg System is ideal for mounting cameras, lights or other accessories on all smooth surfaces like glass, cars, walls. Anytime, anywhere. The systems payload can carry up to 100kg/220lbs. It is supplied with tube ttings to enable the camera to be mounted on any at surface. This unique system gives a rock solid platform by extracting air via tubes from the limpet mounts.
CLICK HERE
to view video
CLICK HERE
to view video
12
Narrow gauge
Compact gauge
13
Magnum Dolly
Basic Dolly Weight Transport dimensions Length Width Height Max. payload capacity Track width (maximum) (minimum) Weight of MAGNUM column Transport size, assembled Length Width Height Max. payload capacity (column extended) Max. payload capacity (column retracted) Max. height (Euro adapter) Min. height (Euro adapter) Lift range Fastest time through column lift range Max. current consumption Battery performance when fully charged Charge cycle with mains Charger Unit Mains/Charger Unit with automatic voltage selection and overload protection Battery voltage Battery capacity MAGNUM Dolly with Duo Jib Max. Payload capacity with high rig mode For more information CLICK HERE 200kg 440lbs 64cm 64cm 80 cm 300kg 800kg 148cm 80cm 68cm 3,1 sec. 4,5 sec. 30 A Approx. 150 1 A = 8 Std. 5 A = 3 Std. 110-220 V 2 1 2 1 2 7 660lbs 1763lbs 4 10 2 7 2 4 48 V 24 V 62cm 36cm 78kg 2 1 2 171lbs 64cm 64cm 37cm 1000kg 2 1 2 1 1 2 2200lbs 62kg 136lbs
Max. payload capacity with Low Rig mode Standard mode Max. platform height (Euro Adapter) Min. platform height (Euro Adapter) Lift range MAGNUM Dolly with Mini Jib Arm Max. payload capacity Max. height (Euro Adapter) Min. height (Euro Adapter) Min. height with Mini Low Rig Lift range MAGNUM Dolly with Low Rig Max. payload capacity Max. height (Euro Adapter) Min. height (Euro Adapter) Lift range Basic Dolly with Felix Crane system Max. payload capacity Max. platform height Lift range
220kg 250kg 272cm 26cm 150cm 80kg 235cm 70cm 9cm 165cm 130kg 78cm 10cm 68cm 220kg 275cm 275cm
24 V / 48 V 8 Ah / 16 Ah
14
15
Wildcat Dolly
Overall length Overall width Overall height Weight Platform height Low mode High mode: Load capacity 216mm 330mm 1000kg 8.5 13 2200lbs. 1707mm 1280mm 1036mm 60kg 67.2 50.4 40.8 132 lbs.
The Wildcat is not just another desert dolly, but a carefully engineered wide prole tyred tracking and load carrying dolly that can tackle multi roles on set. It is light enough to lift onto a roof rack, but tough enough to lug over a tonne of load. Fitted with precision wheel hubs and optimum steering geometry, it can handle demanding tracking moves where tracks are not feasible.
16
Husky Dolly
Weight Payload Platform height Size Dimensions folded Handle height 27kg 200kg 15cm 80 x 117 x 27cm 80 x 68 x 36cm 1m 60lb 440lb 6 31 x 46 x 11 31 x 27 x 14 3.3
Husky Dolly Succeeding the legendary lightweight dolly, the new Husky dolly combines state of the art design and manufacturing making it possible to reduce the weight by 11kg / 24lb. The new Husky dolly is not only extremely lightweight, but can fold for transport into such an ingenious folding position that it serves as a transport cart for your camera case or other bulky equipment. The Husky is a stable base for your tripod but Bazooka risers, turnstile attachment or seats can also be mounted. One for all All parts (e.g. wheels) can be mounted with one allen key. There are various ttings for seat extensions and seats.
The Husky Dolly can be congured into many differing formats, oor ready and track ready are shown here.
17
Skater Mini
Width Length Height including wheels Mounting height +/-20 rocker Mounting height +/-30 rocker Weight incl. +/-20 rocker For camera up to Size of Flight Case Best operating temperature 436.5mm 385.0mm 72.0mm 51.4mm 71.0mm 3.8kg 30kg 17.2 15.2 2.83 2.0 2.8 8.38lbs 66lbs
The Idea Behind The SKATER The idea behind the SKATER Mini is fairly simple. It basically takes advantage of a friction tilt head on which tracking wheels are directly attached, optimized for an extremly low camera position. Because the SKATER Mini is so small and lightweight it allows the operator to move the camera by themselves, giving them direct control over tracking shots in any direction as well as all sorts of curved moves. You can precisely dene any centre of rotation at any diameter. Its all your decision: whether you like to orbit around an object in front of the lens or make a curved move into a nal product shot.
Shots which normally require sophisticated rigging or even motion control can now be executed with almost no prep time. A SKATER Mini is not limited to only one camera height. Rig your SKATER Mini to whatever height you need with the SKATER Mini Levelling Supports. Combine them with standard lighting equipment and simply place a tracking board on top to get your shot at whatever height you need.
18
Telescopic Cranes
Techno 15
Max. lens height Max. telescopic extent Max. camera weight Total weight 4.57m 3.12m 35kg 578kg 15 10 3 80Ibs 1274Ibs
60
4572mm (15) up telescopic range 3120mm (103) 1025mm (34) Panavision strongly recommend that two grips be used when operating this piece of equipment. A crane technician must always be used with this item. For more information CLICK HERE
19
Technocrane 21 Lite
Max. lens height Max. telescopic extent Max. camera weight Total weight 6.62m 4.73m 30kg 327kg 21 7 15 6 13.6 Ibs 721Ibs
Panavision strongly recommend that two grips be used when operating this piece of equipment. A crane technician must always be used with this item.
20
SuperTechno 22
Max. lens height Max. telescopic extent Max. camera weight Total weight 5.9m 5.2m 35kg 621kg 19 17 80Ibs 1435Ibs
Panavision strongly recommend that two grips be used when operating this piece of equipment. A crane technician must always be used with this item. For more information CLICK HERE
21
SuperTechno 30
Max. lens height Max. telescopic extent Max. camera weight Total weight 9.2m 11.95m 35kg 1200kg 30 39 2 80lbs 2640Ibs
extended dimension
Panavision strongly recommend that two grips be used when operating this piece of equipment. A crane technician must always be used with this item.
22
SuperTechno 50
Max. lens height Max. telescopic extent Max. camera weight Total weight 15.11m 18.45m 35kg 2300kg 50 60 6 80lbs 5100Ibs
Extended dimension A three-sided rain cover is available for this crane on request. Panavision strongly recommend that two grips be used when operating this piece of equipment. Two crane technicians must always be used with this item.
23
SuperTechno 100
Max. lens height Max. telescopic extent Max. camera weight Total Weight 31.96m 24.92m 35kg 4166kg 105 82 80lbs 9184.5lbs
AVAILABLE SOON
Panavision strongly recommend that two grips be used when operating this piece of equipment. Three crane technicians must always be used with this item.
24
Moviebird 30
Max. lens height Max. telescopic extent Max. camera weight Total weight 10m 7m 70kg 1500kg 33 23 165lbs 3300Ibs
The MovieBird crane has been developed with many unique and ingenious feaqtures: n A telescopic crane that runs faster and quieter n A crane that is affordable for all types of TV and Film productions n A telescopic crane system that takes less time to set up and is easier to use n A lighter and more rigid telescopic crane arm for those long lens shots
Panavision strongly recommend that two grips be used when operating this piece of equipment. A crane technician must always be used with this item. For more information CLICK HERE
25
Moviebird 44
Max. lens height Max. telescopic extent Max. camera weight Total weight 13.3m 11.25m 50kg 1720kg 44 37 110lbs 3792Ibs
Panavision strongly recommend that two grips be used when operating this piece of equipment. A crane technician must always be used with this item.
26
Stable shots
Panavision strongly recommend that two grips be used when operating this piece of equipment. Two crane technicians must always be used with this item. The new adjustable column 40cm lift range with complete load
27
95 x 14kg = 1330kg 2823lbs 47 x 14kg = 658 12253.5mm 2785mm 1993.5mm 2329.5mm 2763.5mm 652kg 896kg 40.2ft 9.1ft 6.5ft 7.64ft 9.06ft 1437lbs 1975lbs
28
29
Strada
The largest modular camera crane in the world.
Strada Camera Crane Specications 100 weight (with main chassis & weights) 85 weight (with main chassis & weights) 72 weight (with main chassis & weights) Main chassis with steering Pedestal to rear Minimum operating space from pedestal placement 100 weight (with portable chassis & weights) 85 weight (with portable chassis & weights) 72 weight (with portable chassis & weights) Portable chassis Crane Operators (provided) Arm Reach Lens Height with Dolly Risers 30.5m (100) 25.9m (85) 24.1m (79) 21.9m (72) 19.8m (65) 17.7m (58) 15.5m (52) 13.7m (45) Lens Height without Dolly Risers 22.9m (75) 23.8m (78) 22.2m (73) 20.7m (68) 18.9m (62) 16.8m (55) 14.6m (48) 12.8m (42) 3855kg 3628kg 3401kg 76 x 106 12 15 2721 2721 2494 6000lbs 6000lbs 5500lbs 8500lbs 8000lbs 7500lbs
228cm x 259cm 76 x 86 2 Overall Arm Length Max. Nose Load (includes Camera & Remote Head) 38.5kg (85lbs) 45.4kg (100lbs) 56.7kg (125lbs) 90.7kg (200lbs) 102kg (225lbs) 113kg (250lbs) 124.7kg (275lbs) 136.1kg (300lbs)
30.5m (100) 25.9m (85) 24.1m (79) 21.9m (72) 19.8m (65) 17.7m (58) 15.5m (52) 13.7m (45)
34.1m (112) 29.5m (97) 27.7m (91) 25.6m (84) 23.4m (77) 21.3m (70) 19.5m (64) 17.4m (57)
Panavision strongly recommend that two grips be used when operating this piece of equipment. Two crane technicians must always be used with this item.
30
Giraffe Crane
Giraffe Classic
Maximum Lens height Drop down Maximum reach Maximum length Minimum width on track mode 1 Minimum width on track mode 2-5 Minimum width on wheels Maximum doorway height Travelling weight (w/o ballast weight) 945cm 533cm 944cm 1173cm 73cm 114cm 142cm 228cm 294kg 31 17 6 31 6 38 6 2 4 3 9 4 8 7 6 648lbs. Giraffe Maximum Height Remote
Plan dimensions of base
Panavision strongly recommend that two grips be used when operating this piece of equipment. A crane technician must always be used with this item.
66" 1.65m
57" 1.42m
Min. Lens Max. Max. Max. Height Camera Load Load Underslung Rise (2 Crew) (1 Crew)
Weights to Balance
8 3
250kg 550lbs.
150kg 330lbs. 150kg 330lbs. 150kg 330lbs 150kg 330lbs. 150kg 330lbs. 100kg 220lbs.
60kg 135lbs. 170kg 366lbs. 185kg 400lbs. 225kg 495lbs. 250kg 550lbs. 270kg 592lbs. 293kg 648lbs.
310kg 680lbs. 884kg 1940lbs. 1100kg 2420lbs. 860kg 1890lbs 1225kg 2695lbs. 1180kg 2596lbs. 1145kg 2515lbs.
@20kg 6 8 7-1/2 15
3.7m 250kg 12 0 550lbs. 6.4m 225kg 21 0 500lbs. 9.0m 29 3 13.0m 42 3 160kg 350lbs. -
31
Giraffe Compact
Maximum lens height Drop down Maximum reach Maximum length Minimum width Hybrid Dolly on track Maximum doorway height Travelling weight (w/o ballast weight) plan dimensions of base 752cm 379cm 693cm 930cm 69cm 158cm 200kg 24 8 12 5 22 9 30 6 27 5 2 440lbs Panavision strongly recommend that two grips be used when operating this piece of equipment. A crane technician must always be used with this item.
Draw Back
Track Width
Weights to Balance
.622m 130kg 24.5 292lbs. .622m 166kg 24.5 373lbs. .622m 191kg 24.5 421lbs.
342kg 770lbs.
1/2
32
91kg (200lbs)
Remote
8100cm (267)
Panavision strongly recommend that two grips be used when operating this piece of equipment. Two crane technicians must always be used with this item. plan dimensions of base 212cm (611)
Ride
410.5cm (136)
Track Width
Weights to Balance
-0.05m -0 2 -1.75m -5 7
250kg 550lbs. -
1.6m 5 2
128kg 288lbs. 360kg 810lbs. 396kg 891lbs. 432kg 972lbs. 425kg 956lbs.
5.8m 19 0 7.58m 24 8 -
9.35m 5.02m -3.5m 30 6 16 6 -11 4 10.5m 6.09m -5.5m 34 20 0 -18 2 13.5m 7.62m -7.5m 44 2 25 0 -24 4
12.15m 39 8 16.0m 52 4 -
20.25m 66 4 -
33
731.5cm (24)
34
35
36
Panavision strongly recommend that two grips be used when operating this piece of equipment. A crane technician must always be used with this item.
37
Version 3 (remote) Max. height Lift capacity Lift range Crane weight Counterweight required Extension arms required To front To rear Reach (measured from pivot to) Front Rear Version 4 (remote) Max. height Lift capacity Lift range Crane weight Counterweight required Extension arms required To front To rear Reach (measured from pivot to) Front Rear Version 5 (remote) Max. height Lift capacity Lift range Crane weight Counterweight required Extension arms required To front To rear Reach (measured from pivot to) Front Rear 568cm 172cm 18 10 5 9 3 x 150cm 1 x 75cm 5 2 6 590cm 60kg 872cm 173kg 368kg 19 8 132lbs 29 380lbs 809lbs Version 5 493cm 172cm 16 5 5 9 2 x 150cm + 1 x 75cm 1 x 75cm 5 + 2 6 2 6 540cm 85kg 772cm 165kg 368kg 18 187lbs 25 8 363lbs 809lbs Version 4 418cm 172cm 13 10 5 9 2 x 150cm 1 x 75cm 5 2 6 475cm 85kg 642cm 140kg 320kg 15 10 187lbs 21 3 308lbs 704lbs Version 3
38
Version 5a (remote) Max. height Lift capacity Lift range Crane weight Counterweight required Extension arms required To front To rear Reach (measured from pivot to) Front Rear Version 6 (remote) Max. height Lift capacity Lift range Crane weight Counterweight required Extension arms required To front To rear Reach (measured from pivot to) Front Rear 643cm 172cm 21 5 5 9 3 x 150cm + 1 x 75cm 1 x 75cm 5 + 2 6 2 6 650cm 40kg 992cm 185kg 368kg 21 8 88lbs 33 407lbs 809lbs Version 6 568cm 187cm 18 10 6 3 3 x 150cm 1 x 90cm 5 3 590cm 85kg 872cm 175kg 432kg 19 8 187lbs 29 385lbs 950lbs Version 5a
39
Version 6a (remote) Max. height Lift capacity Lift range Crane weight Counterweight required Extension arms required To front To rear Reach (measured from pivot to) Front Rear Version 7 (remote) Max. Height Lift capacity Lift range Crane weight Counterweight required Extension arms required To front To rear Reach (measured from pivot to) Front Rear 718cm 187cm 23 11 6 3 3 x 150cm + 2 x 75cm 1 x 90cm 5 + 2 6 3 718cm 40kg 1132cm 197kg 416kg 23 11 88lbs 37 8 433lbs 915lbs Version 7 643cm 187cm 21 5 6 3 3 x 150cm + 2 x 75cm 1 x 90cm 5 + 2 6 3 650cm 60kg 992cm 187kg 416kg 21 8 132lbs 33 411lbs 915lbs Version 6a
The Base Dolly is tted with 4 rubber wheels and operates with 2 wheel steering.
40
Version 1
Version 2
Panavision strongly recommend that two grips be used when operating this piece of equipment. A crane technician must always be used with this item.
41
Version 3 Front extension arms required Rear extension arm required Lift range Maximum Euro-adapter height Lift capacity (working load) 2 pers. + accessories Counterweight required Crane weight (excluding dolly and weights) Dolly weight Arm reach (pivot to camera head mount) Length of rear end (pivot to outside of bucket) Version 4 Front extension arms required Rear extension arm required Lift range Maximum Euro-adapter height Lift capacity (working load) 1 pers. + accessories Counterweight required Crane weight (excluding dolly and weights) Dolly weight Arm reach (pivot to camera head mount) Length of rear end (pivot to outside of bucket) Version 5 Front extension arms required Rear extension arm required Lift range Maximum Euro-adapter height Lift capacity (working load) 1 pers. + accessories Counterweight required Crane weight (excluding dolly and weights) Dolly weight Arm reach (pivot to camera head mount) Length of rear end (pivot to outside of bucket) 3 x 150cm 1 x 127cm 809cm 576cm 128 kg 480kg 234kg 80kg 549cm 220cm 5 4 2 30 7 18 10 281lbs 1056lbs 514lbs 176lbs 18 7 2 Version 4 2 x 150cm + 1 x 100cm 1 x 127cm 727cm 534cm 150kg 480kg 227kg 80kg 498cm 220cm 5 + 3 3 4 2 23 9 17 6 330lbs 1056lbs 499lbs 176lbs 16 4 7 2 Version 4 2 x 150cm 1 x 127cm 564cm 453cm 216kg 480kg 215kg 80kg 401cm 220cm 5 4 2 18 6 14 10 475lbs 1056lbs 473lbs 176lbs 13 1 7 2 Version 3
42
Version 6 Front extension arms required Rear extension arm required Lift range Maximum height to Mitchell plate Lift capacity (working load) camera + accessories Counterweight required Crane weight (excluding dolly and weights) Dolly weight Arm reach (pivot to camera head mount) Length of rear end (pivot to outside of bucket) Version 7 Front extension arms required Rear extension arm required Lift range Maximum height to Mitchell plate Lift capacity (working load) camera + accessories Counterweight required Crane weight (excluding dolly and weights) Dolly weight Arm reach (pivot to camera head mount) Length of rear end (pivot to outside of bucket) Version 8 Front extension arms required Rear extension arm required Lift range Maximum height to Mitchell plate Lift capacity (working load) camera + accessories Counterweight required Crane weight (excluding dolly and weights) Dolly weight Arm reach (pivot to camera head mount) Length of rear end (pivot to outside of bucket) For more information CLICK HERE 4 x 150cm + 1 x 100cm 1 x 127cm 1216cm 798cm 50kg 480kg 257kg 80kg 810cm 220cm 5 + 3 3 4 2 39 10 26 2 110lbs 1056lbs 565lbs 176lbs 26 6 7 2 Version 8 4 x 150cm 1 x 127cm 1054cm 716cm 80kg 476kg 243kg 80kg 713cm 220cm 5 4 2 34 6 23 5 176lbs 1047lbs 534lbs 176lbs 23 4 7 2 Version 7 3 x 150cm + 1 x 100cm 1 x 127cm 971cm 675cm 80kg 420kg 237kg 80kg 663cm 220cm 5 + 3 3 4 2 31 10 22 1 176lbs 924lbs 521lbs 176lbs 21 8 7 2 Version 6
43
Version 9 Front extension arms required Rear extension arm required Lift range Maximum Euro-adapter height Lift capacity (working load) 2 pers. + accessories Counterweight required Crane weight (excluding dolly and weights) Dolly weight Arm reach (pivot to camera head mount) Length of rear end (pivot to outside of bucket) Version 10 Front extension arms required Rear extension arm required Lift range Maximum Euro-adapter height Lift capacity (working load) 2 pers. + accessories Counterweight required Crane weight (excluding dolly and weights) Dolly weight Arm reach (pivot to camera head mount) Length of rear end (pivot to outside of bucket) Version 11 Front extension arms required Rear extension arm required Lift range Maximum Euro-adapter height Lift capacity (working load) 2 pers. + accessories Counterweight required Crane weight (excluding dolly and weights) Dolly weight Arm reach (pivot to camera head mount) Length of rear end (pivot to outside of bucket) 2 x 150cm 1 x 127cm 564cm 483cm 216kg 480kg 226kg 80kg 401cm 220cm 5 4 2 18 6 15 10 475lbs 1056lbs 497lbs 176lbs 13 1 7 2 Version 11 1 x 150cm + 1 x 100cm 1 x 127cm 481cm 442cm 250kg 456kg 220kg 80kg 350cm 220cm 5 + 3 3 4 2 15 9 14 5 550lbs 1003lbs 484lbs 176lbs 11 5 7 2 Version 10 1 x 150cm 1 x 127cm 319cm 361cm 250kg 276kg 195kg 80kg 253cm 220cm 5 4 2 10 5 11 10 550lbs 607lbs 429lbs 176lbs 8 3 7 2 Version 9
44
Version 12 Front extension arms required Rear extension arm required Lift range Maximum Euro-adapter height Lift capacity (working load) 1 pers. + accessories Counterweight required Crane weight (excluding dolly and weights) Dolly weight Arm reach (pivot to camera head mount) Length of rear end (pivot to outside of bucket) Version 13 Front extension arms required Rear extension arm required Lift range Maximum Euro-adapter height Lift capacity (working load) 1 pers. + accessories Counterweight required Crane weight (excluding dolly and weights) Dolly weight Arm reach (pivot to camera head mount) Length of rear end (pivot to outside of bucket) Version 14 Front extension arms required Rear extension arm required Lift range Maximum height to Mitchell plate Lift capacity (working load) camera + accessories Counterweight required Crane weight (excluding dolly and weights) Dolly weight Arm reach (pivot to camera head mount) Length of rear end (pivot to outside of bucket) For more information CLICK HERE 3 x 150cm + 1 x 100cm 1 x 127cm 971cm 705cm 80kg 420kg 248kg 80kg 663cm 220cm 5 + 3 3 4 2 31 10 23 1 176lbs 924lbs 545lbs 176lbs 21 8 7 2 Version 14 3 x 150cm 1 x 127cm 809cm 606cm 128 kg 480kg 245kg 80kg 549cm 220cm 5 4 2 30 7 19 10 281lbs 1056lbs 539lbs 176lbs 18 7 2 Version 13 2 x 150cm + 1 x 100cm 1 x 127cm 727cm 564cm 150kg 480kg 238kg 80kg 498cm 220cm 5 + 3 3 4 2 23 9 18 6 330lbs 1056lbs 523lbs 176lbs 16 4 7 2 Version 12
45
Version 15 Front extension arms required Rear extension arm required Lift range Maximum height to Mitchell plate Lift capacity (working load) camera + accessories Counterweight required Crane weight (excluding dolly and weights) Dolly weight Arm reach (pivot to camera head mount) Length of rear end (pivot to outside of bucket) Version 16 Front extension arms required Rear extension arm required Lift range Maximum height to Mitchell plate Lift capacity (working load) camera + accessories Counterweight required Crane weight (excluding dolly and weights) Dolly weight Arm reach (pivot to camera head mount) Length of rear end (pivot to outside of bucket) 4 x 150cm + 1 x 100cm 1 x 127cm 1216cm 828cm 50kg 480kg 268kg 80kg 810cm 220cm 5 + 3 3 4 2 39 10 27 2 110lbs 1056lbs 589lbs 176lbs 26 6 7 2 Version 16 4 x 150cm 1 x 127cm 1054cm 747cm 80kg 476kg 254kg 80kg 713cm 220cm 5 4 2 34 6 24 5 176lbs 1047lbs 558lbs 176lbs 23 4 7 2 Version 15
46
GF Jib
Reach - retracted Reach - extended Rear - retracted Rear - extended Lift range retracted Lift range extended Max Payload - retracted Max Payload - extended 139 cm 188cm 42cm 94cm 186cm 256cm 60kg 40kg 4 6 6 1 1 4 3 1 6 1 8 4 132lbs 88lbs
Jib mount required - Euro-adapter (Mitchell adapter available) Camera head mount Weight of Jib Max counterweight Tilt angle Euro-adapter or Mitchell 42kg 120kg 10 x 12kg 43 degrees 92lbs 264lbs
47
Straight Shootr
Straight Shootr overall length Straight Shootr weight (no load) Maximum load (camera/head, etc.) Barbell counterweights (supplied) 2.8m 45.4kg 45.4kg 122.4kg 9 10 100lbs 100lbs 270lbs
(10 x 11.3kg & 4 x 2.2kg weights)(10 x 25lbs & 4 x 5lbs weights) Maximum All Up weight With its proprietary linear slider, the Straight Shootr is the only jib arm to provide true 3-axis moves without any mechanically-induced roll. n Camera ready in less than one minute n One piece - no assembly required n Accepts camera load to 45.4kg (100lbs) n Standard barbell weights n Mitchell mounting plates n Sealed ball bearings n Precision bubble level on centre hub n Slate black nish - baked powder paint n Optional ball adapter available for various pan/tilt heads 213.2kg 470lbs
48
The Egripment JanJib System offers a completely new method of building a Jib Arm. As a result of a unique modular system, the operator can now create a variety of 10 different jib arms lengths and congurations using a single centre trunnion section, one basic front section and one basic rear section. The JanJib System is constructed from lightweight aluminum sections which clip together quickly and easily, yet the JanJib is very strong and rigid which offers camera operators top quality steady camera movement. The JanJib also includes the high quality bearing system which assures the smooth movement that camera operators have come to expect.
JanJib F75
Arm reach Operational length Maximum height Minimum height Maximum load 75cm 142cm 143 0cm 45kg 2,5 4,7 4,7 0.0 99,2lbs
JanJib F120
Arm reach Operational length Maximum height Minimum height Maximum load 120cm 212cm 197 0cm 45kg 3,9 7,0 6,5 0.0 99,2lbs
49
Dimensions A B C D E F G H I 29cm 1.8m 76cm 1.6m 1.3m 3.3m 2m 1.7m 12cm 11.5 5 11.5 2 6 5 2.25 4 2.75 10 7.9 6 5 5 5.6 4.875
50
51
n Centre mount also available for Hybrid n The Model 23 Jib stores conveniently in compartments in a self-contained utility barrow n Four weight carts are provided for easy transportation of weights and other accessories n The jib can be congured in 3 foot increments from (1.83m) 6 to (6.4m) 21 n Support cables are pre-adjusted to the proper length and colour coded for easy assembly
52
53
Medium Arm
Length Pivot to nose Pivot to bucket Nose to bucket Length at max height Max weight on arm Weights Large Small Carrying weight With basic accessories Transportation weight Above ground height Ground level to max Below ground height Ground level to min Arm dimensions Window clearance 195cm 111cm 304cm 137cm 45kg 12kg 5.9kg 5kg Approx. 180kg 122cm 121cm 5.7cm w x 15cm / -30cm 5.7cm w x 15cm h Approx. 12cm 6 5 3 8 10 1 4 7 100lbs 28lbs 13lbs 100lbs Approx. 400lbs 4 4 2-1/4 w x 6-1/4 h -1 2-1/4 w x 6-1/4 h Approx. 5
Long Arm
Length Pivot to nose Pivot to bucket Nose to bucket Length at max height Max weight on arm Weights Large Small Carrying weight With basic accessories Transportation weight Above ground height Ground level to max Below ground height Ground level to min Arm dimensions Window clearance 263cm 172cm 436cm 183cm 45kg 12kg 5.9kg 8 8 5 8 14 4 6 100lbs 28lbs 13lbs
54
Towercam XL
Lens height (max.) Lens height (min.) Lift speed Weight Load 990cm 286cm 81cm/s 89kg 45kg 32.5ft 9.4ft 2.6ft/s 198lbs 100lbs There are four different TOWERCAM versions: TOWERCAM - standard TOWERCAM XL - extra large TOWERCAM FX - overhead TOWERCAM XS - extra small For more information CLICK HERE
TOWERCAM is a remote controlled computer-assisted telescoping camera column which can be combined with any remote-head. The column runs very smoothly and almost silently and has a very short rigging time (less than one hour). The TOWERCAM plus remote-head can be operated by only one person as the operation of the column is accomplished with a footpedal. The system offers crane-like movement without a crane. TOWERCAM is a space-saving alternative to conventional camera cranes and allows the camera to be placed in areas where traditional cranes would never t.
Ladder Pods 12 18
Double Ladder Pod (regular) Double Ladder Pod (large) 1.8-3.7m 3-5.5m 6-12 10-18
55
General Characteristics The Scorpio Stabilised Head is a digital remote head with stabilization in all axes. Its digital system will stabilize any lm or video camera up to 45Kg (100lbs). Its stabilisation is effective up to 300 mm focal length in 35 mm. It will stabilise typical zooms such as 24-275 mm or 24-290 mm. The level of stabilisation is optimal for any telescopic crane, xed crane, dolly, camera car, or any type of platform. STABILISED HEAD PROVIDES n Power for all lm and video cameras n Two video lines n Witness camera n Power supply for Scorpio focus or other popular lens controls n Three control systems are available: Handwheels, Joystick and Pan Bar n Programmable limits, Damping and Speed adjustment for all axes n Horizon level n Looking straight down 4th axis control capability
56
ScorpioHead
Specications n The Scorpio Head can be congured with two or three axes n The digitally controlled Scorpio Head performs with heavy camera loads up to 80kg (176lbs.) with two axes and to 40kg (88 lbs) with three axes n The Remote Head can be controlled from up to 500m (1500 feet) away. Series channel RS485 Half-duplex n All axes (pan, tilt & roll; zoom, focus & iris) are programmable and repeatable n Two control systems are available: handwheels & joystick n Its mechanical system allows you to move eachaxis manually n You have a lot of available options on the control system that allows you to work in a comfortable way: Roll-Horizon, Zoom Compensating, Limits for all axes, Focus Setup (Internal, External and by Radio), Damping adjustment, Speed adjustment etc n Power to the Head ranging from 19 V to 34 V DC n Maximum Speed is 2.7 sec per 360 n Shoot 360 continuous in all the axes Scorpio Head
Conguration diagram
Dimensions
57
Mini Scorpio
Weight Max. load 16kg 30kg 35lbs 66lbs
General Characteristics n Mini Head SB92 can be controlled from up to 500 metres by a RS485 cable or by wireless half-duplex microwave 2.4 GHz n All axes are programmable and repeatable in hard wire mode n Three control systems are avalable, JDR (Panbar), Joystick and Handwheels n All information transferable to a computer by RS232 cable n Special power box for lm cameras n Programmables limits, damping and speed adjustment for all axes n 3 axes available for video cameras Technical Specications n 2 axis PAN & TILT 360 degrees continuous n 1 power supply 28 V DC 20 A n Power from battery or power supply 20 V to 35 V DC n 2 Video signal n 1 Triaxial signal n 7 Aux channels 2 A n 1 Aux channel 22 A n 1 connection for Servicevision remote lens control n 1 out 12 V - 3 A n Max. speed 2 sec. for 360 degrees. Wireless Control n Connection between Mini Head and control n Half duplex microwave 2.4 GHz n 99 channels of comunication n Aux power out 12V JDR Pan bar
58
The Pee Pod 500 HD is a professional light weight robotic camera head for TV & Film. It can carry Cameras of up to 30kg with a remarkable degree of precision and control. Specically targeted at High Denition applications where high resolution of movement is critical.
59
Hot Head
Type Maximum load Width Height Depth Weight Minimal speed Maximum speed remote 70kg 37cm 68cm 27cm 23kg 60 in 17min 360 in 2.5 sec Hot Head 154.3lbs 1.2ft 2.2ft 0.9ft 50.7lbs
60
360 Degrees continuous 2 seconds to 24 hours 24v DC Max 7.5 amps Avg 3 amps 28
61
62
Key Head
63
The FX-Motion E-Gearing system is an easy to use lightweight geared-head remote control system. Ideal for use in hazardous situations and on cranes and towers. A complete system can be set up in less then 5 minutes. n The console unit accepts the geared heads own panhandles n Gear ratios and limit positions can be changed on the y on both pan and tilt axes n Camera can be started from the console E-Gearing System Console Unit
The fx-motion E-Gearing System Motor Units High reliability and low-maintainance obtained through the use of brushless motors. Stainless steel mounting anges on the motor units provide low backlash even after intensive use. Shaft assemblies of the pan and tilt motor units are interchangeble for use with different brands of gearheads. Intuitive user interface with backlit LCD. n Up to 60 seconds record and replay, transforms an ordinary geared head into a low-cost and portable motion capture device
n Gearing direction can be reversed, useful when mounting the geared head upside down
64
Hydroex
Hydroex Arri 435 RemoteAquaCam
Camera Magazines Operating depth Weight in air Weight in water Lenses Remote Control Arri 435 SL Cine 400ft 30.5m 28kg -1.3kg 100ft 62lbs -3lbs The 435 RAC (RemoteAquaCam) was engineered primarily for use with remote 3-axis heads on cranes for at sea or wet stage work. Field testing has also proven the 435 RAC to be as useful for handheld lming under the water or oating on the surface. Designed around a standard Arriex 435, custom SL Cine 400 magazines and Preston remote focus and iris controls, this low prole camera system can be easily tted with Panavision, Zeiss, Hawke or Cooke spherical and anamorphic lenses. Some small lightweight zoom lenses can also be used. 45.7m 23.5kg 20.4kg 150ft 52lbs 45lbs
Hydroex - Hydrohead
Operating Depth Weight in Air Weight in Water Power Required
110/240VAC or 48VDC
The HydroHead from HydroFlex Inc. is a waterproof remote pan and tilt head. It is the perfect compliment to our 435 and 35-3 RemoteAquaCams. The HydroHeads light weight and low prole combined with the tubular hydrodynamics of the RemoteAquaCams allow this system to glide through the water with less resistance than any other system currently available.
65
Hydroex - 3 Axis
Operating depth Weight in air Weight in water Power required 46m 51kg 43kg 150ft 114lbs 96lbs
110/240VAC or 48VDC
THE 3 Axis Hydrohead from Hydroex Inc. further enhances the performance of the Hydrohead. Following on from this well established head, the 3-axis option now gives the camera crews even more options for wet shooting.
66
The Panagator
4x4 All Terrain Crane Base
Weight unladen Fully loaded Height Width Length with crane Column rise Hydraulic stabilizing legs Hydraulic auto levelling column 4x4 Diff lock 1840kg 3140kg 244cm 175cm 518cm 33cm 4048lbs 6922lbs 8 5 9 17 1 1 The Panagator will arrive at your location pre built with the 30ft Super Technocrane already tted. Simply drive the whole thing out of the truck it arrives in, and then to your location, whether it be up hills, through muddy elds, or just a shoot where the crane has to be repositioned many times. The Panagator has a very quick setup time therefore will save production time and money.
67
The Panaconda
4x4 Multi Terrain Motorised Crane Base
Length: Width: Base Height: Weight (w/o post & arm) 406cm 229cm 122cm 2840kg 13 4 7 6 4 6262 lbs. n 4 Wheel Drive n Compatible with all Panavision telescopic cranes up to 50 including Supertechno and Moviebird n Adjustable post to achieve over 48 of lens height n Handheld wireless remote control base operation n Leveling jacks for extra support on uneven surfaces n Easily moved by technicians or grip crew
68
69
Australasia
Panavision Melbourne Phone: +61 (3) 8532 8800 www.panavision.asia Panavision Sydney Phone: +61 (2) 8437 5555 www.panavision.asia Panavision Queensland Phone: +61 (7) 5656 7333 www.panavision.asia Panavision New Zealand Phone: +64 (9) 360 8750 www.panavision.co.nz
70
www.panavision.co.uk