Anda di halaman 1dari 2

Technical & Safety Information

Regulations: OSHA & MSHA (contd) MSHA (Mine Safety and Health Administration)
Standards - 30 CFR Sections 56.13021 and 57.13021  Except where automatic shut-off valves are used, safety chains or other suitable locking devices shall be used at connections to machines of high-pressure hose line of 3/4 inside diameter or larger, and between high-pressure hose lines of 3/4 inside diameter of larger, where a connection failure would create a hazard. Standards - 30 CFR Section 75.1730 (e)  Safety chains, suitable locking devices, or automatic cut-off valves shall be used at connections to machines of high-pressure hose lines of 3/4 inside diameter or larger, and between high-pressure hose lines of 3/4 inside diameter or larger, where a connection failure would create a hazard. For purposes of this paragraph, high-pressure means pressure of 100 psi or more. Standards - 30 CFR Section 77.412 (d)  Safety chains or suitable locking devices shall be used at connections to machines of high-pressure hose line of 1-inch inside diameter or larger, and between high-pressure hose line of 1-inch inside diameter or larger, where a connection failure would create a hazard.

Fluid Compatibility Guide - Dixon Quick Couplings


WARNING!
The following chart is intended only as a guide in selecting various elastomers and metals for use with uids to be conveyed through Dixon Quick Disconnect Couplings. This list does not guarantee suitability for a particular application. Final selection is dependent upon operating pressure, uid and ambient temperature, concentration of media, duration of exposure, environmental conditions, and frequency of connect and disconnect.

Material Buna-N Buna-N (MIL-H-5606 Fluids) Buna-N (Hydrocarbon Fuels) Fluorocarbon Rubber (FKM) Ethyl Propylene Diene Monomer Neoprene Silicone Fluorosilicone (FVMQ) Urethane Polyurethane PTFE Encapsulated Silicone Peruoroelastomer (Compound 1) Peruoroelastomer (Compound 2) Peruoroelastomer (Compound 3) Fluoroelastomer

Prex Code Standard MJFFPESFSUUPTSK4K6K7H-

Trade Name Nitrile Nitrile Nitrile Viton EPDM Neoprene Silicone Silastic Urethane Polyurethane TES Kalrez 4079 Kalrez 6375 Kalrez 7075 Aas

Availability* Stock 3-5 Days 3-5 Days 3-5 Days 5-7 Days 7-10 Days 7-10 Days 7-10 Days 7-10 Days 7-10 Days 7-10 Days 5-7 Days 7-10 Days 7-10 Days 7-10 Days

Range C -40C to +121C -54C to +135C -54C to +71C -29C to +204C -54C to +149C -43C to +149C -73C to +177C -60C to +180C -40C to +82C -54C to +100C -73C to +204C -20C to +316C -20C to +275C -20C to +327C -5C to +204C

Range F -40F to +250F -65F to +275F -65F to +160F -20F to +400F -65F to +300F -45F to +300F -100F to +350F -76F to +376F -40F to +180F -65F to 212F -100F to +400F -4F to +600F -4F to +525F -4F to +620F +23F to +400F

* For guidance purposes - consult sales ofce for more information/details.

500 Telephone: +44 (0)1772 323529

Fax: +44 (0)1772 314664

Technical & Safety Information


Media Name Acetic Anhydride Acetone Acetylene Air (To 200F) Air (Above 200F) Alcohol, Ethyl Alcohol, Methyl Alkalies, General Ammonia, Aqueous Ammonia, Gas Ammonia, Anhydrous Ammonia, Hydroxide Aroclor Benzene (Benzol) Bleach Solutions Brake Fluid, Non-Petro Bromine Gas Butane Butyl Alcohol Carbon Dioxide, Dry Carbon Dioxide, Wet Carbon Monoxide Carbon Tetrachloride Cellulube Creosote Crude Oil Cutting Oil Diester Lubricants Ethane Ethanol Ethyl Chloride Ethylene Glycol Suggested Seal PPStandard Standard FPStandard Standard PPPPFFPPFStandard Standard Standard Standard Standard FPFFStandard FStandard Standard Standard PMedia Name Freon, General Ferric Hydroxide Formaldehyde (50%) Fuel Oils, General Gasoline Glycerine (Glycerol) Glycols Helium Heptane Hexane Hydraulic Oil, Aircraft Hydraulic Oil, Petroleum Hydraulic Oil, Phosphate Hydrogen Gas Hydrolube Isobutyl Alcohol Isopropyl Alcohol Jet Fuel (to 160F) Jet Fuel (above 160F) Kerosene Lindol LP Gas Magnesium Hydroxide Methane Methanol Methyl Bromide MIL-H-5606 MIL-H-5806 MIL-H-6083 MIL-H-7083 Mineral Oils Suggested Seal EStandard PStandard Standard Standard PStandard Standard Standard Standard Standard PStandard Standard PFJFFStandard PStandard FStandard Standard FM1Standard Standard Standard Standard Media Name Mineral Spirits Nickel Acetate Nickel Suphate Nitrogen, Gas Nitrous Oxide Octane Oleum Spirits OS45 and OS45-1 Oxygen, Non-Breathing Paint Thinner Parafn Peanut Oil Pentane Perchloroethylene Phosphoric Acid (100%) Photographic Solutions Potassium Acetate Propane Propylene Propylene Glycol Silicone Oil Steam, General Service Stoddard Solvent Sulphuric Acid (100%) Toluene Transmission Fluid (A) Trichloroethylene Vegetable Oil Water Water, Distilled Water, Dionized Water, Sea Suggested Seal Standard PPStandard Standard FStandard FFFStandard Standard Standard FPPPStandard FStandard Nitrile HStandard FFStandard FStandard Standard Standard Standard P-

Methyl Ethyl Ketone (MEK) P-

Telephone: +44 (0)1772 323529

Fax: +44 (0)1772 314664

501

Anda mungkin juga menyukai