Electrical Engineering
Mechanical Engineering
Mechatronics Engineering
Chemical Engineering
Civil Engineering
Prospectus
2013-14
CONTENTS
Welcome to Wah Engineering College Message by the Chairman Board of Governors Message by the Vice Chancellor Message by the Principal Vision & Objectives Organizational Set Up University of Wah Wah Engineering College Introduction University of Wah Wah Engineering College Student Services The Campus Department Profiles & Academic Programs
9 10 11 12 13 14 15 16 17 18 23 31
CONTENTS
Department of Electrical Engineering Department of Mechanical Engineering Department of Mechatronics Engineering Department of Chemical Engineering Department of Civil Engineering Clubs & Societies Academic Calendar Rules & Regulations Regulations for Postgraduate Engineering Programs Regulations for Undergraduate Programs General Discipline Rules Dress Code for Students Fee Tariff Important Telephone Numbers
Welcome to
Message from
Lt. Gen.
10
Message from
Vice Chancellor
It is a unique honor to be associated with Wah Engineering College (WEC). I feel extremely lucky to be a part of an institution that strives to gather individuals from a diverse background and produce inspired, academically accomplished, culturally enlightened and socially responsible engineers prepared to lead by example. In light of this objective and our development plan, along with the patronage of POFs, I am confident that we will soon be one of the best engineering institutes of the country. In the very short time since our inception, we have put in a large amount of effort to bring the College to its current state. We now have a high quality of instruction, good infrastructure, hardworking and accomplished students and a corresponding research and publication output, all of which is evidence of the dedication of our staff to the institution in a very competitive environment. Academic activities, unsurpassed developmental pace, high end connectivity, conducive environment and productivity index of the college are all reasons to be excited to be a part of the of class of 17 at WEC. Graduate activities though in their startup are already expanding to the third discipline. By launching our Student Loan initiative we are ensuring the access of quality education to those who could have only dreamt of it, and we hope you will be a part of the class taking advantage of each of these facilities. Good luck and my prayers are with you! 11
Message from
Principal
Welcome to Wah Engineering College. In the serene environment and the city of highest literacy rate in the country we will endeavor for a better future for all our students. Pursuing engineering studies is challenging but is equally fun. At Wah Engineering College, we are continuously working on consolidating and improving our standing through inducting additional quality faculty, setting up new laboratories and expanding our infrastructure.From a humble start of three departments we have already launched two more departments in 2010 and also started our post graduate program from the same year. We also have a unique setting where not only interaction with industry in the neighborhood is a reality, but we can also share thought and experience with the backbone of the industry, the technicians. Our graduates are already making their presence felt in the market and during your stay you will also have an opportunity to contribute to the industry. Acquisition of knowledge and professional education has become an expensive affair. No doubt there are schemes for merit and/or need based scholarship but remember that for a majority of you, your parents are spending a lot of money on you and the best return you can provide them is by staying focused and achieving timely goals, contributing towards betterment of the family, society and the country. Do not miss out on Student Loan program to support your studies with pride. Ample opportunities are available for participation in co curricular and extracurricular activities; participate in them actively and make best use of your stay here. We as a family have to grow together; carry yourself with pride and dignity, always be mindful of your rights and responsibilities and stay focused on your aim.
12
Keep your spirits high and remain abreast with time to surpass the challenges of life and transitioning from job aspirants to job providers. Equipped with knowledge from here your decisions tomorrow will shape the future of the country. May all your endeavors succeed and may you remain blessed. Aameen.
VISION
Provide a conducive environment for excellence in academics and research. Remain abreast with emerging sciences and technologies. Exploit its unique location for fostering academia industry linkage. Groom individuals from diverse background into academically accomplished socially responsible and enlightened engineers. Establish a center of excellence for human resource to meet challenging global industrial requirements.
OBJECTIVES
13
ORGANIZATIONAL SETUP
University of Wah
CHANCELLOR Makhdoom Syed Ahmed Mehmood (Governor of the Punjab) CHAIRMAN BOARD OF GOVERNORS Lt Gen Muhammad Ahsan Mahmood HI(M) VICE CHANCELLOR Brig Dr Khaliq Ur Rehman Shad SI(M) (Retd) PRINCIPAL Brig Dr Khaliq Ur Rehman Shad SI(M) (Retd) REGISTRAR Prof Aziz Ur Rehman TREASURER Mr Fakher Hussain CONTROLLER OF EXAMINATIONS Engr Muhammad Nisar
14
ORGANIZATIONAL SETUP
Wah Engineering College
PRINCIPAL Brig Dr Khaliq Ur Rehman Shad SI(M) (Retd) DEAN OF ENGINEERING Prof Dr A K Salariya HEAD OF DEPARTMENTS Electrical Engineering Department Dr Aamir Hanif Mechanical Engineering Department Col Hafiz Sibghat Ullah Fazil SI(M) (Retd) Mechatronics Engineering Department Dr Mohammad Asim Farooqi Chemical Engineering Department Prof Dr A K Salariya Civil Engineering Department Brig Dr Aftab Sadiq (Retd) SERVICES Director Students Affairs Air Cdre Dr Sajid Hussain (Retd) Director Admin & Coord Lt Col Hamid Nawaz Khan TI(M) (Retd) Coordination Officer Lt Col Muhammad Iqbal Baig (Retd) Administrative Officer Maj Iqbal Hussain Khan (Retd) Finance Manager Ms Afsheen Ishtiaq Resource Manager Mr Ijlal Raza IT Manager Mr Rehan Farooq Assistant Librarian Mr Mohammad Saifullah Security Supervisor Mr Gul Dad Shah Transport Supervisor Mr Muhammad Ejaz Incharge Operations Mr Muhammad Afsar Khan 15
UNIVERSITY OF WAH
The University of Wah was established in 2005 and is chartered by the Government of Punjab. The University has two constituent colleges, Mashal and Wah Engineering College. The University Campus is located in the beautiful and pollution free environment of the Wah Cantonment. The city of Wah is situated 50km NorthWest of Islamabad, the capital of Pakistan. Wah has a historical background and wasalways a favorite place of Mughal Rulers. They built several gardens such as the famous Wah Garden here. Taxila city is adjacent to city of Wah and is rich in ancient Buddhist archaeological sites and Sikh sacred places. The city of Wah has a literacy rate of approximately 98% and is known as the Model City for education throughout Pakistan. Since its establishment, the University of Wah has registered progress unmatched by any other University in the country 16
at such an early phase, and we are now in the process of producing a community of scholars committed to making inroads into unchartered areas of knowledge both in emerging and traditional disciplines. Numerous sophisticated facilities are being provided at the campus to maintain a high standard of education. The University has adopted 4year (Honors) Degree Courses approved by the Higher Education Commission. The University has two spacious and well equipped Campuses, Mashal Campus and Wah Engineering Campus, which are located on Quaid Avenue, Wah Cantt.
Wah Engineering College, a constituent college of the University of Wah was established in 2004 and offers 4 years B.Sc. degree programs in the fields of Electrical, Mechanical, Mechatronics, Civil and Chemical Engineering. Moreover, the College has also started postgraduate program offering Ph.D. and MS degrees in Electrical and Mechanical Engineering. Wah Engineering College spreads over an area of 21 acres and has excellent infrastructure, laboratories and service facilities. The College is located at the hub of industries in this region. Industrial organizations such as POF, HIT, AWC, PMO, HMC etc are in close proximity of the College and other diverse private sector organizations at Hattar Industrial Estate are also located nearby. This gives an ideal environment for the students to benefit from both theoretical and practical aspects of their academic programs. Our Engineering Campus is providing a great uplift in
enhancing the standard of modern technical education. The building of the Engineering Campus is quite spacious and designed in accordance with educational requirements to meet the challenges of the future. Recently, construction of new building at second floor of Academic Block with covered area of more than 35000 sqft began to accommodate additional laboratories and classrooms. The Campus is a blend of theoretical research and extensive practical training and aspires to produce outstanding graduates with professional competence, humanistic outlook, ethical rectitude, organizational and managerial skills and outstanding leadership qualities. We aspire to grow as a modern center of excellence for research and development in the field of science and technology to meet the growing demands of the new millennium. 17
STUDENT SERVICES
Student Services
Library Services
The library aims to enrich learning, teaching and research programs of the University by providing timely access to high quality scholarly information and learning material in a variety of formats. With this mission in mind, the library aims to be a premier provider of knowledgebased information resources and userfocused services.
The book bank has been recently launched to aid students to keep books intact for the entire semester on ostensible rent. The library has a large area where student can read and discuss their educational issues and has all the facilities which are necessary to provide a conducive environment for studies. The library expansion project is about to commence to acquire more space and to set the new standards of modern age engineering library.
Currently located in the newly built Academic Block, WEC Campus Library provides students with a comfortable, spacious and peaceful environment. It has text books, reference works and journals/CDs/DVDs to meet the needs of the students and faculty. The library has a print collection of around 10,000 books relevant to B.Sc. and Postgraduate engineering degree programs. A digital library also exists within the library to boost the instructive wants of the students more ingeniously. Campus wide access to more than 400 journals and more than 10,000 ebooks is available through the HECs National Digital Library and approximately 2,500 e-books of concerned technologies are available locally. 18
Central Library
The University of Wah has a comfortable and spacious Central Library. The library comprises a three story building against the background of beautiful hills. The interior design, dcor and furniture of the Central Library create an atmosphere of intellectual sanctuary where in the students and faculty can concentrate on their studies. The Central Library operates in two shifts and remains open till late at night. It has text books, reference works and journals to meet the needs of students and faculty. At this time there are more than 51000 books along with over a hundred video films on history, literature, safety, housekeeping, fire prevention and on other technical subjects.
Student Services
IT Infrastructure
Our IT setup is currently being revamped to be in harmony with acquiring quality engineering education. One of the goals of Wah Engineering College is to enhance learning in an information rich environment by: promoting a vibrant oncampus experience developing a wholeofUniversity approach to blended learning ensuring the development and maintenance of flexible physical and virtual teaching spaces, and providing access to quality information resources
At Wah Engineering College, we understand the importance of preparing our students to meet the challenges of the Information Age and of providing them with the tools to take advantage of it. As a comprehensive interactive university, we strive to prepare our students to be equipped for a future of learning. Currently, Wah Engineering College has three state oftheart dedicated computer labs that offer 50 computer stations each. All computers are loaded with latest engineering software and offer network capabilities. These labs are open to all students, faculty and staff. We are establishing two more similar labs by the end of this year. These days universities are absolutely dependent on data centers, server rooms and data communication equipment. As universities increasingly depend on technology for day to day operations, the importance of the server room grows exponentially. The World Wide Web is an important aspect in the current world, as a consequence of the requirement to perpetually share data and information effectively around the world. It truly is extremely important that data communication systems are solid with a zero malfunction rate. With this aim we are working on a complete redesign of our server room. 19
Given the increasing demand of highly skilled engineers in both practical and theoretical domains, Wah Engineering College strongly emphasizes the development of modern tools of information. One of the most significant methods of acquiring information is the Internet which has become critical for innovation and research. The IT Department will soon be acquiring PERN2 bandwidth from HEC. The PERN2 project is commissioned to align with this goal and the Universitys aim of engaging students in a challenging curriculum through blended learning in which technology enhances the learning experience.
Cafeteria
Transport
WEC transport is available on payment for most students. This facility is available on specific routes between Wah and Islamabad. Pick and drop service between hostel and campus is available. The College also provides limited service to the students residing in Rawalpindi/Islamabad. In addition, bus service from the POF Welfare Trust is also available.
Student Services There is a standalone cafeteria which provides quality edibles at affordable prices. To ensure quality and hygiene of the food, a Canteen Committee looks after the menu selection, prices and quality of service.
Hostels
Accommodation is available for 400 students in College hostels located in the cantonment area. A Hostel Committee looks after the hostel affairs and provision of good food. The hostels are supervised by wardens who are appointed from faculty members.
Medical Room
We have recently established an MI room in new block to render immediate medical facility to WEC students. A medical officer of POFs hospital regularly visits WEC to dispense medical advice to our students.
Student Tutors
Each class is assigned a tutor from the faculty. The tutor helps the student to identify and achieve high academic goals and take advantage of learning opportunities. The tutors also guide students at the time of registration of every semester. 20
regular manner. Facilitate participation of larger number of students. Devolve power to students. Engage students in constructive past times of their interest. Streamline the selection process for office bearers. Coordinate issuance of the events calendar for the academic year.
aims to help students to stay in touch with college and other WECIANS, wherever they are in the world. One of our greatest assets is our network of alumni. They all have one thing in common the passion and the drive to succeed; a spirit that enriches the very heart of this institution. We pride ourselves on our graduates' achievements. The main objectives of Alumni Association are to: Promote, foster and maintain links between the members of the Association and Wah Engineering College. Encourage members of the Association to take active interest in the life of Wah Engineering College. Promote the interests of Wah Engineering College and to aid its development. Facilitate and support meetings and associations between the members. Promote continuing education and create opportunities for employment and business for all our members.
Student Services
Students Council
Students Council, the elected representative student body is responsible for managing the extracurricular activities at Wah Engineering College. Students Council comprises of elected students (office bearers) who co ordinate and manage various extracurricular activities in the college under guidance of the Students Affairs Committee (SAC). Student council members are involved in implementation of college instructions/policies regarding general discipline of students. The office bearers are expected to display a high level of discipline, adherence to university rules and moral values. Student council comprises of the following office bearers from specified classes. President (Final Year) Vice President (Final Year) Assistant Vice President(3rd Year) Secretary (3rd Year) Treasurer (Final Year) Assistant Treasurer (3rd Year) Girls Representative (Final Year)
Student Services
22
THE CAMPUS
The Campus
Administration Block
The administration block includes the offices of the Principal, Dean of Engineering, Head of Departments, Director Admin & Coord, Administration Officer, Coordination Officer and Finance Manager. A conference room is a part of this block.
Laboratories
Academic Block
The Academic Block is fully equipped with all modern facilities, comparable to the facilities provided in any world class university. The classrooms are well furnished and equipped with all necessary teaching aids. Facilities like overhead projectors and multimedia along with sophisticated and modern computer laboratories also exist.
Each department has an adequate number of designated laboratories which are equipped with the latest and state of the art equipment in the designated laboratories. The list of the laboratories is given in the details of each department.
Auditorium
The Auditorium occupies the central place in the University with a seating capacity of 500 students. The Auditorium is used for conferences, seminars, debates, declamation contests, concerts and other extracurricular activities.
Sports Facilities
Elaborate sports facilities are available within the college. Apart from its own facilities, sports complex of POF is also utilized by the college students. The sports facilities are of international standards including, Squash Court, Astroturf Hockey Stadium, covered gymnasium, Tennis Courts, Swimming Pool, Golf Club and Shooting Club. 23
24
25
27
Electrical Engineering
The Electrical Engineering Department was established in 2004 and is one of the largest departments of WEC. The department offers B.Sc., MS and Ph.D. degrees in Electrical Engineering. Annually 100 students are enrolled in the undergraduate program. The department conducts its programs with a mission to augment the electrical engineering education by imparting basic understanding of electrical engineering fundamentals based on a foundation of physical sciences, mathematics, computing, and technology. The programs are designed to groom students for required technical as well as managerial skills for their practical life and to enable them to smoothly pursue higher studies.
28
Electrical Engineering
The department has a vibrant research program both at faculty and postgraduate levels. Faculty members and students are aggressively pursuing collaborative research with the local industrial giant, Pakistan Ordnance Factories (POF), Wah. Major research interests include Renewable Energy, Power Distribution Systems, Signal and Image Processing, Control Systems, Communication Systems and Sensor Networks. Graduates of the department are expected to possess knowledge of the fundamentals of electrical engineering with at least one specialized area. The programs of Electrical Engineering are designed to serve the following objectives: Provide basic knowledge of electrical engineering principles along with the required supporting knowledge of mathematics, physical sciences, computing, and engineering fundamentals. Develop basic skills needed to design and execute experimental projects. Develop technological capability to meet social needs using electrical engineering principles, tools and practices. Develop ability to formulate problems/projects and to plan a process for solution by taking advantage of diverse technical knowledge and skills. Develop the ability to organize and present information and to write and speak effectively. Provide sufficient breadth and depth for successful subsequent post graduate studies and to undertake lifelong professional pursuits. Develop critical and independent thinking to provide solutions of practical problems encountered by relevant industries.
The department won first prize in Industrial Exhibition under Distinguished Innovation, Collaboration & Entrepreneurship (DICE2012).
29
THE FACULTY
Electrical Engineering Department
Electrical Engineering Dr. Aamir Hanif
HoD/ Eminent Educationist and Researcher
Ph.D. Electrical Engg, UET Taxila, Pakistan. M.Sc. Electrical Engg, UET Taxila, Pakistan. B.Sc. (Hons.) Electrical Engg, UET Taxila, Pakistan. HEC approved Ph.D. Supervisor Research Interests: Power Flow and Voltage Control, Modeling and Simulation of Power System Components, Power Quality Enhancement Using CPD, FACTs and DGs in Power System.
30
THE FACULTY
Electrical Engineering Department
Electrical Engineering Mr. Abu Bakar Waqas
Lecturer
M.Sc. Electrical Engg. UET Taxila, Pakistan. B.Sc. Electrical Engg. UET Taxila, Pakistan. Research Interests: Power Systems Operation, Digital design, Signal Processing, Speech Enhancement.
31
THE FACULTY
Electrical Engineering
32
Electrical Engineering
EIGHTH SEMESTER EE-412 Senior Design Project II EE-421 Elective VI EE-422 Elective VII MS-409 Entrepreneurship Total
33
No. Course Title Credits SPECIALIZATION IN COMMUNICATIONS & SIGNAL PROCESSING 1. Computer Communication Networks (Breadth Core-I) 3+1 2. Electronic Circuit Design (Breadth Core-II) 3+1 3. Radar and TV Systems 3+1 4. Antennas and Wave Propagation 3+1 5. Mobile and Pervasive Computing 3+1 6. Optical Communication 3+1 7. Digital Image Processing 3+1 8. Satellite Communication 3+1 9. Digital Communication 3+1 10. Wave Propagation and Antennas 3+1 11. Digital Signal Processing 3+1 12. Information Theory and Coding 3+1 13. Instrumentation and Measurements 3+1 14. Transmission and Switching Systems 3+1 15. Mobile and Wireless Communication 3+1 16. Satellite Engineering 3+1 17. RF and Microwave Engineering 3+1 18. Navigation and Radar Systems 3+1 19. Power Distribution and Utilization 3+1 20. Optical Fiber Communications 3+1
Note I: Choice of Electives in 6th, 7th & 8th semester will be dependent on Elective chosen in 5th semester. No student can change the specialization area after choosing any of above 3 areas in his/her 5th semester. Note II: The Elective courses offered by the Department in a semester can be changed depending on the availability of teachers and related facilities and will be notified one week before the start of the semester.
34
LABORATORIES
The Electrical Engineering Department has the following laboratories to meet the academic requirements of students and teachers as well as the professional needs of the government and private organizations.
Power Lab
This facility has several sets of three phase transformer trainer which can be used to analyze the network parameters of a three phase system. This lab is also equipped with various testing equipment like Megger,
Electrical Engineering
current transformers, 3wire AC/DC distribution box, three phase bridge rectifier boards, oscilloscopes and power supplies etc.
oscilloscopes, function generators and various tools required for the laboratory experiments. Electrical Engineering
Communication Lab
This lab is equipped with the latest sets of CPAL trainers (for conducting AM/ FM modulation / demodulation, analog LP/HP filtering, amplification etc.), function generators, digital oscilloscopes, high performance PCs, TV trainer, microwave trainer, antenna trainer and a VCR trainer & networking tools etc.
PCB Lab
The printed circuit board (PCB) lab provides the students of WEC, the single layer inhouse PCB manufacturing and fabrication facility. Students can design PCBs in software and within a very small time gets its physical form. Services of this lab are also utilized to fulfill the departmental PCB fabrication requirements as well as for the industryacademia projects.
Computer Lab
The Computer lab has high end workstations for instructing students on using the latest engineering software. Students receive training on the latest versions of MATLAB, LabVIEW, AutoCAD and several microprocessor programming software.
Digital Lab
This lab offers students an insight of the digital world. This lab is equipped with extensive range of DLD trainers, 8051 microcontroller trainers, latest FPGA kits and each workbench consists of high performance PC, power supplies, function generator and oscilloscope etc.
36
MS ELECTRICAL ENGINEERING
Scheme of Studies
Total Credit Hours: 30 The requirements for the MS Degree Program shall comprise of minimum of 24 and 6 credit hours for course work and research work, respectively. The course work shall consist of minimum of three core courses (9 Cr Hrs), four specialization courses (12 Cr Hrs) and one minor course (3 Cr Hrs). In case a minor course is not offered, the student may select another course from core courses or other specializations. Research work of 6 Cr Hrs will be on a topic relevant to the chosen Specialization. Electrical Engineering
37
MS ELECTRICAL ENGINEERING
Scheme of Studies
Electrical Engineering
Code Course Title CORE COURSES MA-522 Advanced Engineering Mathematics (Compulsory) EE-502 Power Systems EE-627 High Voltage Engineering EE-504 Advanced Communication Engineering EE-604 Advanced Digital Signal Processing EE-506 Advanced Control Systems EE-607 Artificial MS-617 Research Methodologies Code Course Title SPECIALIZATION IN POWER EE-625 Power Quality EE-626 Power Electronics and Motor Drives EE-628 Alternate Energy Resources EE-721 Protective Relaying EE-722 Power Station Design EE-723 Intelligent Tools for Power Systems EE-724 Modeling & Simulation of Power System Components EE-823 Power System Optimization EE-824 Power System Dynamics and Stability EE-825 Power System Reliability EE-826 Advanced Topics in Power Code Course Title SPECIALIZATION IN CONTROL EE-613 Linear Systems Theory EE-614 Digital Control Systems EE-615 Advanced Control Engineering EE-616 Fuzzy Control EE-718 Non-Linear Control Systems EE-719 Adaptive Control and Nonlinear Stability Theory EE-720 Optimal Control System EE-821 Advanced Topics in Control EE-822 Optimization Methods for Systems and Control Credits 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 Credits 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 Credits 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 Code Course Title Credits SPECIALIZATION COURSES IN COMM. & SIGNAL PROCESSING EE-601 Mobile Communication 3+0 EE-602 Telecommunication Network 3+0 EE-603 Digital Communication System 3+0 EE-622 Satellite Communication 3+0 EE-624 Applied Information and Coding Theory 3+0 EE-702 Wireless Technology 3+0 EE-703 Image and Video Processing 3+0 EE-704 Optical Fiber Communication 3+0 EE-801 Biomedical Image Processing 3+0 EE-802 Special Topics in Wireless Communication 3+0 Code Course Title MINOR COURSES MS-610 Engineering Project Management MS-612 Entrepreneurship for Engineers MS-614 Leadership and Team Management MS-616 Engineering Management Credits 3+0 3+0 3+0 3+0
38
39
40
41
Equipped with stateofthe art labs and infrastructural facilities, the Department of Mechanical Engineering offers richly integrated curriculum combining classroom learning with engineering practices. Mechanical engineering is a very diverse profession involving design of machines, devices, various products, controls systems, generation, conversion, transmission and utilization of mechanical and thermal power. Mechanical engineers' assignments often include analysis and synthesis of mechanical, thermal and fluid systems. Manufacturing systems, robotics and electromechanical devices also fall in the purview of mechanical engineering. Graduates of this field are among the most sought after and enjoy professional engagement in industry, government organizations, consulting and research organizations.
42
Mechanical Engineering
At Wah engineering college students participate in research projects through individual directed studies with faculty supervision. The program culminates with a capstone senior design course sequence highlighted by real life projects sponsored by the various industries. Students benefit from the challenges and gratification that come through direct interaction with practicing engineers. Participation in student chapters of professional societies provides leadership opportunities, congenial activities and learning experiences outside the classrooms. Wah Engineering College offers undergraduate and post-graduate programs in mechanical engineering leading to bachelor, masters and doctoral degrees in this discipline. Blend of highly qualified faculty and state of the art well equipped laboratories and unlimited access to the industrial infrastructure of Pakistan Ordinance Factories provides a unique environment for research and development. The department emphasizes on the correlation of theory to real life engineering problems and produces human resource that is relevant to industries and productive immediately after graduation. Our post graduate programs cater to the specific needs of strategic organizations. It is a modular program which is flexible enough to accommodate the specific needs of professional organizations. A strong inter-face between academia and industry makes the program truly market oriented.
43
THE FACULTY
Mechanical Engineering Department
Mechanical Engineering
Col. Hafiz Sibghat Ullah Fazil (Retd)
HoD/Assistant Professor
M.Sc. Helicopter Tech, ENSICA France. BE Aerospace, PAF CAE, Karachi, Pakistan. Research Interests: Power Plant, Thermodynamics, Design Analysis.
44
THE FACULTY
Mechanical Engineering Department
Mechanical Engineering Lt. Col. M. Afzal Bhatti (Retd)
Lecturer
M.Sc. Mechanical Engg. UET Taxila, Pakistan. B.Sc. Mechanical Engg. UET Lahore, Pakistan. Research Interests: Heat & Mass Transfer, Mechanics of Machines, Mechanics of Materials.
45
SIXTH SEMESTER ME305 Control Engineering ME306 Heat & Mass Transfer ME307 Machine Design ME308 CAD/CAM GS302 Engineering Economics & Optimization HS226 Engineering Ethics Total SEVENTH SEMESTER ME401 Mechanical Vibration ME4XX Technical Elective Course I ME4XX Technical Elective Course II GS301 Engineering Statistics & Probability HU221 Industrial Psychology & Human Behavior ME402 Final Project Total
EIGHTH SEMESTER ME-4XX Technical Elective Course III ME-4XX Technical Elective Course IV GS-4XX Management Elective Course I ME-402 Final Project Total
46
Mechanical Engineering
Note 1: Selection of elective courses shall be made from each relevant specialization or as may be offered by the department. Note 2: The elective courses offered by the department in a semester can be changed depending on the available resources and will be notified one week before the commencement of the semester. Note 3: Pre-requisites i. Thermodynamics I for Thermodynamics II ii. Fluid Mechanics I for Fluid Mechanics II iii. Mechanics of Materials I for Mechanics of Materials II iv. Mechanics if Machines I for Mechanics of Machines II v. Manufacturing Process I for Manufacturing Process II A student will only be allowed to sit in a subsequent subject after clearing the pre-requisite of that subject. 47
LABORATORIES
Mechanical Engineering The department has the following wellequipped laboratories to meet the academic requirements of students and teachers as well as the professional needs of the government and private organizations.
48
dovetail the theoretical knowledge by performing variety of experiments related to basic concepts of refrigeration and air conditioning. Mechanical Engineering
Hydraulics Lab
This laboratory is equipped with a number of hydraulic test benches to perform a number of different experiments.
Thermodynamics Lab
This laboratory offers the students a broad outlook into the industry. A detailed study of water &fire tube boilers, steam turbines and compressors can be carried out. A variety of different tests can be performed at engine test bench such as brake horsepower, specific fuel consumption etc.
Projects Lab
The Mechanical Project Laboratory provides students to work on their projects. This laboratory is located at the machine shop. It serves as a place for students to store projects as well.
Mechanical Engineering
CAD Lab
The Computer Aided Design laboratory has 50 high end work stations for instructing students on using the latest engineering software. Students receive training on the latest versions of AutoCAD, Pro E, ANSYS, MATLAB and other software.
50
MS MECHANICAL ENGINEERING
Scheme of Studies
Total Credit Hours: 30
The requirements for the MS Degree Program shall comprise of 24 and 6 credit hours for course work and research work respectively. The course work shall consist of three courses (9 credit hours), four specialization courses (12 credit hours) and one minor course (3 credit hours). In case a minor course is not offered, the student may select another course from core courses or other specializations. Research work of 6 credit hours will be on a topic relevant to the chosen specialization. Mechanical Engineering
51
MS MECHANICAL ENGINEERING
Scheme of Studies
Mechanical Engineering
Code Course Title CORE COURSES MA-501 Advanced Engineering Mathematics (Compulsory) ME-503 Advanced Fluid Mechanics ME-504 Advanced Stress Analysis ME-505 Advanced Thermodynamics ME-507 Automation and Control ME-601 Manufacturing System ME-614 Advanced Engineering Materials Credits 3+0 3+0 3+0 3+0 3+0 3+0 3+0 MTS-506 MTS-614 MTS-622 Applied Artificial Intelligence Advanced Control Systems Modeling & Simulation 3+0 3+0 3+0
Note: Any four to be selected out of specialization courses or as may be offered by the department. Code Course Title MINOR CURSES MS-610 Engineering Project Management MS-612 Entrepreneurship for Engineers MS-614 Leadership and Team Management MS-616 Engineering Management MS-617 Research Methodologies Credits 3+0 3+0 3+0 3+0 3+0
Note: Any two to be selected out of remaining core courses or as may be offered by the department. Code Course Title SPECIALIZATION COURSES ME-522 Advanced Numerical Methods ME-502 Advanced CAD/CAM ME-506 Advanced Manufacturing Techniques ME-615 Metal Forming ME-621 Theory of Plates & Shells ME-625 Gas Dynamics ME-633 Computer Integrated Manufacturing ME-708 Structural Analysis ME-713 Scheduling & Manufacturing System ME-714 Manufacturing Planning & Control ME-718 Composite Material ME-723 Behavior of Materials Under Impact Loading ME-727 Missile Stability & Control ME-730 AeroThermodynamics ME-810 Advanced Mechanical Vibrations ME-811 Finite Element Methods ME-812 Computational Fluid Mechanics ME-816 Fracture Mechanics ME-817 Deformation & Failure of Materials ME-822 Fatigue of Metals & Structures ME-824 Viscous Flow ME-826 Hypersonics ME-828 Stability & Control of Lifting Bodies ME-829 Advanced Topic in Propulsion Systems ME-831 Engineering Plasticity ME-832 Optimization of Engineering Systems Credits 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0 3+0
Note: Any one to be selected out of minor course or as may be offered by the department.
52
MS MECHANICAL ENGINEERING
Program for Academic Modules
Mechanical Engineering
Manufacturing Engineering Engineering Materials Manufacturing System Optimization of Engineering Systems Computer Intgrated Manufacturing CAD/CAM Scheduling of Manufacturing Systems Manufacturing Planning & Control Modeling & Simulation Artificial Intelligence Structural Engineering Structural Analysis Finite Element Method Optimization of Engineering Systems Deformation & Failure of Materials Mechanical Vibration Stress Analysis Theory of Plates & Shells Fracture Mechanics Dynamics & Control Engineering Automation & Control Optimization of Engineering Systems Mechanical Vibration Missile Stability & Control Stability & Control of Lifting Bodies Advanced Control Systems Design Engineering Finite Element Method Stress Analysis Theory of Plates & Shells Engineering Plasticity Engineering Materials Fracture Mechanics Modeling & Simulation Optimization of Engineering Systems Fluid Dynamics Fluid Mechanics Computational Fluid Mechanics Viscous Flow Gas Dynamics Hypersonics Propulsion System AeroThermodynamics Material Engineering Engineering Materials Composite Materials Deformation & Failure of Materials Fatigue of Metals & Structures Behavior of Materials Under Impact Loading Engineering Plasticity Metal Forming
Thermodynamics
53
54
55
Mechatronics is a significant stage in the evolutionary process of modern engineering. The development of computers, microcomputers, embedded systems, smart sensors and the associated information technology has made Mechatronics an essential technological field in the latter part of the twentieth century. Into the twentyfirst century, we are witnessing advances in integrated bio electromechanical systems, quantum computers, nano and pico systems, smart transportation, intelligent systems, etc., that make the future of Mechatronics full of potential and bright possibilities. Engineers and scientists from all walks of life and fields of study can contribute to Mechatronics Engineering. As the engineering and science boundaries become less well defined, students will seek a multidisciplinary education with a strong design component.
56
Mechatronics Engineering
Advances in traditional disciplines fuel the growth of Mechatronic Systems by providing enabling technologies, which mostly include: Advanced Embedded Systems and Image Processing Techniques Artificial Intelligence and Neural Networks Nano and MicroElectromechanical Systems (NEMS and MEMS) Data Acquisition Systems and Smart Sensors Humanoid and BioInspired Robotics
The department aims to teach and train undergraduate students with the flexibility to select from a wide spectrum of career choices and contribute to the industry in a variety of roles. The department also aims to develop skills to design and execute different Mechatronics projects and formulate processes and techniques to carry such design problems effectively. The Mechatronics Engineering graduates are equipped with the knowledge of different technological domains that include: Electronics and Logic Design Manufacturing Processes and Machine Design Techniques Computer Aided Manufacturing and Engineering Industrial Automation and CNCs Instrumentation & Control Theory MicroProcessors and Embedded Systems Artificial Intelligence and Robotics Thermodynamics & Fluid Mechanics Computational Mathematics and Programming.
The department won the Best Engineering Design Award at NERC 2011.
57
THE FACULTY
Mechatronics Engineering
58
THE FACULTY
Mechatronics Engineering Department
Mr. Tehseen Akhtar
Lecturer
MS Mechatronics Engg, NUST, Pakistan. BE Mechatronics Engg, Air Univ, Pakistan. Research Interests: Multi Variable Control, Robotics, UAVs.
Mechatronics Engineering
59
Scheme of Studies
Total Credit Hours: 137
Code Course Title FIRST SEMESTER ME-101 Engineering Statics ME-102 Workshop Technology GS-103 Applied Physics EE-104 Electric Circuits HU-105 Communication Skills & Report Writing GS-101 Calculus & Analytical Geometry Total SECOND SEMESTER MTE-101 Computer Programming MTE-102 Network Analysis GS-103 Ordinary Differential Equations & Linear Algebra ME-102 Engineering Drawing HU-107 Pakistan Studies & Islamic Studies Total THIRD SEMESTER ME-201 Engineering Dynamics EE-202 Electronic Devices & Circuits MTE-203 Data Structures & OOP ME-204 Materials & Manufacturing Processes GS-205 Vector Calculus EE-211 Digital Logic Design Total FOURTH SEMESTER ME-206 Mechanics of Materials EE-209 Electronic Circuits Design HS-2xx Social Sciences Electives MTE-200 ElectroMechanical Systems GS-201 Complex Variables and Transforms MTE-202 Thermodynamics Total
Credits 3+1 0+2 3+0 2+1 3+0 3+0 18 2+1 2+1 3+0 0+2 3+0 14
Code Course Title FIFTH SEMESTER ME-301 Theory of Machines MTE-302 Transducers & Instrumentation ME-303 Fluid Mechanics, Hydraulics & Pneumatics MTE-304 Mechanical Vibrations GS-305 Numerical Analysis MTE-306 Microcontroller Based Design Total SIXTH SEMESTER MTE-307 Control Systems MTE-308 Design of Machine Elements & CAD/CAM MTE-310 Power Electronics GS-310 Probability & Statistics MTE-311 Mechatronics System Design Total SEVENTH SEMESTER MTE-401 Industrial Automation MTE-402 Robotics MTE-4xx Engineering Elective I MS-404 Engineering Economics MTE-405 Senior Design Project Total EIGHTH SEMESTER MTE-4xx Engineering Elective II MTE-407 Heat Transfer MS-4xx Management Science Elective MTE-405 Senior Design Project Total
Credits 2+1 3+1 3+1 2+0 2+1 2+2 20 3+1 2+1 3+1 3+0 2+2 18
3+0 3+1 2+1 3+0 3+0 2+1 19 2+1 3+1 2+0 3+1 3+0 2+1 19
60
61
LABORATORIES
Mechatronics Engineering The department has the following wellequipped laboratories to meet the academic requirements of students and faculty members in addition to research and professional needs of the public and private sector organizations.
plus 10 LEGO Mindstorm NXT kits for modular robot building. The purpose of this lab is to give the students deep knowledge about robotic arms known as manipulators, how they are built, programmed, controlled and what are the applications of manipulators in the industry.
CAE Lab
Computer Aided Engineering Lab contains 50 fully functional high speed computers with installed software like MATLAB, Proe, AutoCAD 2011, Turbo C, Visual Studio, OrCAD, Proteous etc. This lab also contains high quality cameras for image processing. The purpose of this lab is to give the students deep knowledge and practical hands on experience of the latest programming techniques, control systems, 2D Drafting and Annotations, 3D Modeling, Artificial intelligence, Machine Vision and much more.
Robotics Lab
Robotics Lab contains two RHINO XR4 Servo Robots with MarkIV controllers for feedback and control interfaced with desktop PCs for dynamic programming
of which interface with desktop PCs running Linux. These machines come with a stepper motor controller and software named minimill in which Gcodes are used to control the tool path. The purpose of this lab is to give the students a brief introduction to CNC machines, how they are used to make different parts and how they are programmed. 62
Digital Signal Processing and Digital Image Processing is also available in this lab. Mechatronics Engineering
64
65
The Department of Chemical Engineering was established in 2010 with an initial enrolment of 50 students. The department is located in close proximity and with access to one of the Pakistans largest concentration of industrial units relavent to major areas such as Chemical, Petroleum, Refining, Cement, Glass, Fertilizers, Textiles and Explosives and Ordinance. In addition, our resources include cutting edge defense research facilities with which we are collaborating for research and development. One of the areas of research the department will be focusing on is the development of energetic materials.
66
Chemical Engineering
The department has gained considerable prestige and standing in the academic and industrial world due to a highly motivated and outstanding faculty, hardworking and dedicated supporting staff and well equipped dedicated laboratories covering every aspect of chemical engineering education. The graduates of this department contribute directly to the industrial and economic growth of the country & this region in particular. The department is offering courses of study leading to a degree of Bachelor of Science of Chemical Engineering. The curriculum of the degree course is in line with the recommendation of Higher Education Commission. The objective of the courses is to prepare students for all activities related to the operation, design, maintenance, management and supervision of all chemical, bio-chemical and polymer plants. In addition to the conventional Chemical Engineering there is emphasis on pollution control and environmental processes, biochemical processes, materials science and material processing, heterogeneous catalysis, reaction engineering, engineering economics and entrepreneurial skills. Our vision to the future is based on flexibility and adaptability rather as locked into five specialties. At the department, we are conscious that our Chemical Engineering Graduates will be employed in industries based on nanotechnology, biotechnology and higher performance composite materials. Non- conventional lectures, talks and projects are therefore the part of our program where eminent experts in the relevant field are invited to deliver lectures/ seminars on the subject. We are also aware of the global prospective of Chemical Engineering. The graduating students are encouraged, advised, assisted and recommended to apply for higher education/jobs both at national level and other developed countries.
67
THE FACULTY
Chemical Engineering Department
Chemical Engineering Prof. Dr. A.K. Salariya
Professor/Head of Department
Ph.D. Chemical Engg, Univ. of Wales, UK. M.Sc. Adv. Chemical Engg, Univ. of Loughborough, UK. M.Sc. Chemical Engg, UET Lahore, Pakistan. BE Chemical Engg, UET Lahore, Pakistan.
68
THE FACULTY
Chemical Engineering Department
Chemical Engineering Ms. Aasia Farrukh
Lab Engineer
B.Sc. Chemical Engg, UET Lahore, Pakistan. Certificate in Professional Teaching, Bradford, UK. Research Interests: Industrial Safety and Hazards in Chemical Industry.
69
Code Course Title FIRST SEMESTER CH101 Applied ChemistryI MA102 Applied MechanicsI ME115 Engineering Drawing Ch.E101 Engineering Materials Ch.E102 Computers and Computation HU116 Islamic Studies SECOND SEMESTER MA103 Applied MathematicsI Ch.E103 Industrial StoichiometryI GS113 Applied Physics ME105 Mechanical Technology Ch.E104 Particle Technology Ch.E105 Chemical Process Industries THIRD SEMESTER CH202 Applied Chemistry II Ch.E203 Fundamentals of Fluid Mechanics Ch.E204 Mechanical Separations Ch.E205 Industrial Stoichiometry II HU215 Communication Skills
Credits 3+1 1+1 1+1 3+0 2+1 2+0 16 3+0 3+1 2+1 0+1 3+1 2+1 18 3+1 2+1 2+0 2+0 2+0 13
Code Course Title FIFTH SEMESTER GS202 Numerical Analysis Ch.E301 Heat Transfer Fundamentals Ch.E302 Chemical Reaction Engineering Ch.E303 Unit Processes Ch.E304 Mass Transfer Fundamentals
SIXTH SEMESTER Ch.E305 Chemical Engineering Mathematics Ch.E306 Chemical Engg. ThermodynamicsII Ch.E307 Chemical Reactor Design Ch.E308 Process Heat Transfer Ch.E309 Separation Processes
SEVENTH SEMESTER Ch.E401 Industrial Instrumentation Ch.E402 Simultaneous Heat and Mass Transfer Ch.E403 Chemical Engineering Plant Design Ch.E404 Maintenance Engineering Ch.E405 Chemical Engineering Economics Ch.E411 Plant Design Project EIGHTH SEMESTER Ch.E406 Engineering Management Ch.E407 Environmental Engineering Ch.E408 Transport Phenomena Ch.E409 Elective Course Ch.E410 Process Dynamics & Control Ch.E411 Plant Design Project
FOURTH SEMESTER EE201 Electrical Technology Ch.E202 Chemical Engg. Thermodynamics I MA203 Applied Mathematics II Ch.E206 Energy Engineering Ch.E207 Chemical Engineering Fluid Dynamics HU216 Pakistan Studies
3+1 3+0 3+1 2+0 2+0 0+2 17 2+0 2+0 3+1 3+0 3+0 0+2 16
70
Chemical Engineering
Note: The elective courses offered by the department in a semester can be changed depending on the available resources and will be notified one week before the commencement of the semester.
71
LABORATORIES
Chemical Engineering The department has the following laboratories to meet the academic requirements of students and faculty members in addition to research and professional needs of the public and private sector organizations.
Process Lab
In this laboratory, the basic focus is on the analysis of raw materials and products obtained from various process industries which include analysis of water, milk, butter and cement etc.
CAREERS
Chemical Engineering Having a B.Sc. Chemical Engineering degree can make your career a bright one. Chemical engineering graduates have excellent employment prospects. They are employed by various national and multinational companies not only in Pakistan but their demand is also huge abroad. The graduates of Chemical Engineering are employed by,
Oil Refineries Fertilizers Industries Paper and Board Industries Pharmaceutical Companies Chemical Manufacturing Companies Fossil Fuel and Renewable Energy Sector Nuclear Industry Waste Recycling Operations Fuel Reprocessing Companies Waste Management Plastic Industries
Petrochemicals Natural Gas Distribution Companies Oil and Gas Exploration Industries Textile Industries Mineral Processing Companies Energy Sector Environmental Sector Health and Safety Departments Consulting Industries Banking and Finance And many others government and Private Companies
73
74
75
Civil Engineering
The Department of Civil Engineering provides an exciting mix of research and teaching. Our teaching staff makes significant contributions to the field of Civil Engineering in research, teaching and knowledge transfer. Civil Engineering was originally defined simply to distinguish non-military engineering but it actually represents a lot more. Without civil engineers we wouldnt have a constant supply of clean water, roads or trains to get to work in the morning, or substantial energy to help us to save our planets.
76
Civil Engineering
Civil Engineering is concerned with the control of the environment for the benefit of humankind. It is the oldest professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including works like bridges, roads, canals, dams and buildings. If you live in a house or an apartment, work in an office building, use the transportation system, energy, water or other utilities you are touched by a civil engineers creativity. Civil Engineers provide modern society with vital infrastructure and lifeline systems such as cities, roads, buildings, bridges, railroads, water systems, etc. In addition, they protect society from extreme forces of nature such as high winds, earthquakes and floods. Civil Engineering has traditionally used imagination, judgment, reasoning and experience to apply science, technology, mathematics and practical experience to develop that which was only a concept. WEC Civil Engineering ties these foundations to a diverse program one that uses knowledge from a variety of engineering disciplines to work on the complex technical challenges faced by society in the 21st Century. We teach both fundamental principles and practical applications. Considerable emphasis is placed upon practical work, in the form of laboratory classes, physical and computational modeling exercises, project work, surveying fieldwork, design projects and site visits. 77
THE FACULTY
Civil Engineering
78
THE FACULTY
Civil Engineering 79
Civil Engineering
Code Course Title FIFTH SEMESTER CE-301 Construction Management & Planning CE-302 Structural Analysis CE-303 Steel Structures CE-304 Geotechnical Engineering II CE-305 Engineering Hydrology Total SIXTH SEMESTER CE-306 Structural Mechanics CE-307 Plain & Reinforced Concrete I CE-308 Fluid Mechanics II CE-309 Environmental Engineering Total
SEVENTH SEMESTER CE-401 Plain & Reinforced Concrete II CE-402 Transportation Engineering CE-403 Environmental Engineering II CE-404 Hydraulic Engineering CE-409 Project Total EIGHTH SEMESTER CE-405 Structural Engineering CE-406 Irrigation Engineering CE-407 Design of Structures CE-408 Pavement and Foundation Engineering CE-409 Project Total
80
Civil Engineering 81
LABORATORIES
Civil Engineering The department has the following laboratories to meet the academic requirements of students and faculty members in addition to the professional needs of the government and private organizations.
82
PIC
83
In the past few years, Wah Engineering College has emphasized a broad educational mission: to develop the whole student. For a majority of our students, involvement in extracurricular activities plays an important role in the university experience. Extracurricular activities are important not only for students' entertainment and social interaction but are also essential experiences that helps students more importantly gain and improve skills. A wide range of extracurricular activities exist at WEC, meeting a variety of student interests.
84
Following club/societies are functional in WEC and their performance is regularly reviewed by the Students Affairs Committee headed by Director Student Affairs. Each society is managed by students and supervised by a faculty incharge.
Electrical Engineering Professional Society at Wah Engineering College aims to engage students in constructive cocurricular activities in their area of specialization. It successfully organized a 2day workshop on Nanotechnology: Applications, Opportunities & Challenges in collaboration with School of Chemical & Materials engineering (SCME), NUST Islamabad. The workshop was part of Continuous Professional Development (CPD) program. The workshop enabled participants to learn about the foundation and growing applications of nanotechnology in many industries including biotechnology, MEMS, optoelectronics, chemical and nanoelectronics. The workshop also emphasized the challenges that nanotechnology poses to the academia and the industry.
85
Sports Club
Sports are a positive vehicle for social interaction. Active participation in a quality sports program leads to healthy lifestyles and endorses the values of positive competition, fair play and teamwork. Through sports and physical activity we can build healthy, confident people. All students at Wah Engineering College are encouraged to participate in sports and thereby enhance their physical, social, intellectual and personal development. Sports period are included as part of the weekly academic schedule.
Thirty two teams from 20 prestigious institutions took part including EME College, NUST, UET Taxila, Air University, IIUI, COMSATS, etc. Team from WEC obtained top four positions making a clean sweep in EME
86
Swimming Chess Card games Computer games Table Tennis Volley Ball Badminton Clubs & Societies
Students contributions to sports at Wah Engineering College are a very vital part of our success. Sports Club office bearers are elected annually. They organize annual sports competitions and oversee the functioning of the Sports Club.
Debating Club
Debating Club at WEC aims to enhance communication skills to better prepare students for the real world. Specific focus is on: Wah Engineering College has a range of high quality sports facilities including facilities for: Cricket Hockey Football Basket ball 87 Improving, honing and building public speaking skills. Creating and developing critical thinking. Teaching people how to make arguments, especially in hostile environments. Leadership skills. Teaching how to make the winning arguments while simultaneously negating bad arguments.
awareness among students for protection of environment. Different awareness programs are arranged like plantation and anti-smoking campaigns. Representatives of environment protection agencies are invited to share the views on the subject. The society organizes Environmental Protection Awareness programs regularly.
Debating club at WEC is managed by students under the supervision of a faculty incharge. The club arranges inter and intradepartmental competitions like bilingual declamations and speech contests. It prepares teams for competitions at national level. In 2013 interdepartmental declamation contest was organized by debating club which was won by Electrical Engineering Department. The Club invites guests to adjudicate the competitions held in University.
Environmental Club
Environmental Club is formulated in the college to create
The importance of media in this modern world cannot be understated. All avenues of new activities sports and entertainment are being dwelt upon at great length by the members of Mass and Media Society. This society endeavors in spreading news, knowledge and information among students. This keeps our students abreast of the latest news and happenings at WEC. Besides uploading news Mass and Media society provides students an opportunity to acknowledge their writing skills through college magazine.
88
90
Summary
MS Degree
Admission (Eligibility Criteria) Degree Requirement Credit Transfer Duration 4years B.Sc. Engineering degree in relevant discipline, CGPA>2.5, GRE (General)/GAT (General) by NTS with minmum 50% comulative score. Minimum of 24 CH course + 6 CH Research Project, CGPA>2.5, Research Project Topic Approval Seminar and Thesis Defense Seminar. Up to 6 credit hours of relevant courses from other universities with a minimum B grade. Minmum 4Semesters, Maximum 10-Semesters.
ii. Shall have obtained a minimum CGPA of 2.5/4.0 or 1st division from a HEC recognized University. iii. The candidate shall qualify GAT (General) conducted by National Testing Service (NTS) with a minimum 50 % cumulative score or GRE (General) test conducted by Educational Testing Service (ETS), USA. b. Each candidate will apply for admission in response to an advertisement by the University on a prescribed Form along with required documents. The admission to MS Program shall be made on the basis of cumulative merit to be determined from previous academic record and written test. For merit determination, 60% weightage will be given to the academic record (1st engineering degree) and 40% to the GAT (General) or GRE (General) test score. The admission to MS shall be approved by the Board of Advanced Studies and Research (BASR) after a candidate has qualified and recommended by the Admission Committee of the Department concerned. Admission Committee for each Department shall be constituted by the Head of Department (HoD) and endorsed by the Dean of the Faculty of Engineering. Each student so selected shall be required to register and pay the University dues within 15 days from the date of issue of the notification for Admission/Registration, failing which the admission of the selected candidate shall be deemed cancelled.
c.
Ph.D. Degree
Admission (Eligibility Criteria) MS degree in engineering in relevant discipline, CGPA>3.0, GRE (Subject) with 60% percentile score/ GAT (Subject) with minmum of 60% marks by NTS, intrview of the candidate by the admission committee and HoD concern on the proposed research proposal. 48 CH (18 CH Course + 30 CH Thesis Research), CGPA>3.0, Passing Ph.D. qualifying comprensive exam, Thesis proposal defense, publishing atleast one research paper in HEC recognized journal, Thesis evaluation by three foreign experts. Thesis Final Defense before GEC in an open seminar. Up to 6 credit hours of relevant courses from other universities with a minimum B grade. Minimum 3years, Maximum 7years.
Degree Requirement
d.
e.
f.
1. MS Engineering Program
1.1 Admission
a. To be eligible for admission to MS Degree Program, a candidate ; i. Must have sixteen years of education with Bachelor of Engineering Degree in the relevant discipline. a.
1.2 General
The requirements for the MS Degree Program shall be a minimum of 24 and 6 credit hours for course work and research work, respectively. The course work shall
92
consist of minimum of three core courses (9 Cr Hrs), four specialization courses (12 Cr Hrs) and one minor course (3 Cr Hrs). In case a minor course is not offered, the student may select another course from core courses or other specializations. Research work of 6 Cr Hrs will be on a topic relevant to the chosen specialization. b. Normal duration of MS Degree Program is four consecutive semesters/two years but not more than ten semesters/ five years in any case. c. Each department will have a Postgraduate Academic Coordinator who would be responsible for guiding the postgraduate students in selecting the courses and shall sign their registration forms. The Postgraduate Academic Coordinator should preferably be a Ph.D. He/ she will assist the HoD in organizing and conducting postgraduate courses. Each MS Student shall follow the syllabi and courses of studies as may be prescribed by the Academic Council (AC) from time to time. All semester examinations shall be held at the University Campus. English shall be the medium of instructions. An MS student shall be required to pay the registration, tuition and examination fee and such other dues before the start of semester as determined by the University.
the approval of the Board of Faculty and the Academic Council. k. A student who drops all the registered courses or choosing not to register in any course during a semester shall deem to have dropped the semester. l. A student will pay registration fee for each semester. m. The Admission of an MS student shall be deemed as suspended if he/she does not pay registration fee for two consecutive semesters. Such a student will then need to apply for readmission in MS program after paying all dues. Postgraduate Regulations
d.
b.
e. f. g.
c. d. e.
h. A student with inadequate background will need to attend noncredit undergraduate level courses as determined by Head of Department (HoD) in addition to the main MS Program courses. j. Under special circumstances, when a course/courses is/ are not offered at University of Wah, a student can take a maximum of 6 credits of relevant courses in another HEC recognized Institute/University. The grade so earned must not be below a B. Any such course(s) could be transferred on the recommendation of HoD, subject to
f.
g.
Postgraduate Regulations
concerned to the BASR for approval within thirty days of the appointment of supervisor. The student will have to give a seminar for this purpose called Research Project Topic Approval Seminar in front of Guidance and Evaluation Committee (GEC).
c. If a student fails to appear in the End Semester Examination of a course due to any reason, he/she will be treated as absent and will earn F grade. d. A Students grade shall be determined by the course teacher and approved by the Dean of Faculty according to the performance of the student in the final theory examination and the sessional work. Relative grading system shall be followed. The result sheet shall include only letter grades. The following letter grades shall be used to assess the performance of a student in taught courses. Letter Grades A+ A B+ B B C+ C F Numerical Value of Grades 4.0 3.7 3.3 3.0 2.7 2.3 2.0 0.0
1.5 Examinations
a. A student shall be evaluated in each course on the basis of periodical test(s)/assignment(s), course project and mid semester examination during the semester and end semester examination. Each course shall carry 100 marks of which 50% shall be reserved for class test(s)/assignment(s), course project and mid semester examination, and 50% for the end semester examination. A student shall be allowed to appear in the End Semester Examination provided that he/she has been on the rolls of the University during that semester, has registered for the course of study after paying all dues and has attended at least 80% of the lectures/laboratory work.
ii. That the candidate has successfully completed the prescribed course work. iii. That the candidate has completed his/her thesis on research topic approved by the Board of Advanced Studies and Research. iv. The candidate, who has completed the requirements of MS program, shall submit an application on a prescribed
b.
94
form to the Controller of Examinations for Defense of his MS Thesis after due clearance from the respective GEC. v. The Supervisor on the approved performa shall inform the Controller of Examinations through the HoD concerned and Dean about the date on which the Thesis Defense is to be held. The Vice Chancellor shall appoint an external examiner from a panel of examiners recommended by the department concerned and Dean of Engineering.
vi. Thesis Defense shall be held at the University Campus on such a date as may be notified by the Controller of Examinations in consultation with the Supervisor/HoD. vii. The candidate will defend his/her thesis in front of a Committee consisting of HoD, supervisor of the student and an external examiner. viii. The result on prescribed performa of thesis defense will be prepared by the external examiner and supervisor of the student by consensus and will be sent to the Controller of Examinations through HoD. ix. After successful defense of thesis, the candidate will submit six (6) hard bound copies of his/her thesis signed by supervisor, external examiner and HoD, to the Controller of Examinations, one each for University Library, supervisor, Department and the student. x. The Thesis shall be printed on A4 (8.27 11.69) size paper with margins of 11/2 on the left and 1 to the right, top and bottom of each page. The thesis shall have a black hard binding with golden lettering on the front and the spine.
ii. An interview of the candidate will be held on the proposed research proposal (student will submit a research proposal) by the admission committee and HoD concerned.
b. The application shall be submitted to the Head of Department (HoD). c. d. All applications received in the Department shall be considered by the Departmental Admission Committee. The Admission Committee, through respective HOD, shall recommend to the BASR the name of candidates who are found suitable for admission into the Ph.D. Degree Program. The Admission shall be approved by the BASR. A Notification of Admission of candidate(s) approved by the BASR into the Ph.D. Degree Program shall be issued by the Registrar, University of Wah. Each student so selected shall be required to register and pay the University dues within 15 days from the date of issuance of the Notification for Admission, failing which the admission of the selected candidate shall be deemed 95
xi. Each successful candidate shall be awarded the Degree of Master of Science in Engineering in the relevant discipline. xii. If a candidate fails to complete his/her MS thesis within the stipulated time, but has completed required course work of MS engineering, he/she may be awarded a Postgraduate Diploma on fulfillment of all other official requirements.
e. f.
g.
as cancelled. The tuition fee and other dues shall be prescribed by the University from time to time. Postgraduate Regulations h. A Notification of Registration of admitted students into the Ph.D. program will be issued by the Registrar, UW.
offered by the Department. ii. For the course work, the procedure of registration and conduct of examination shall be the same as for MS students.
d. Under special circumstances, a student can take a maximum of 6 credits of relevant courses in another HEC recognized Institute/University. The grade so earned shall not be below B. Any such courses could be transferred on the recommendation of HoD, subject to the approval of the Board of Faculty and the Academic Council. e. The student must get at least B grade in each course in at most two attempts.
b.
b. c. d.
e. f.
review in the area of research to demonstrate that the scholar is fully aware of the current research already done in this area. The scholar has to qualify the comprehensive examination in not more than two attempts. The registration of a Ph.D. student shall be deemed as cancelled if he/she does not pass the Comprehensive Examination even in second attempt. The comprehensive examination mentioned in clause 2.7b for the scholar will be prepared and conducted by Guidance and Evaluation Committee (GEC) of the scholar. The Head of Department of the concerned department will notify the venue, date and time with the concerned supervisor. The scholar will write a technical report based on the literature review of his research topic. The scholar shall appear for a presentation and oral examination in front of the GEC and other invited audience. In case the scholar fails in the oral examination he will have one more chance. Written and oral exams must be passed separately. The report will be submitted to the Board of Advanced Studies and Research (BASR) through respective department for notification accordingly.
Postgraduate Regulations
The GEC will be chaired by the HoD. After the approval of Research topic on the approved Performa by BASR, the student will regularly brief the GEC on sixmonthly basis about his/ her progress on the research topic and to seek further guidance.
f. g.
h. j. k.
b.
ii. A three (3)hour test from General Engineering in the relevant area and Mathematics (pass marks percentage is 50%). iii. Oral presentation on the core area of research. The main theme of the oral presentation is the literature
Postgraduate Regulations
about the Research work and will also submit the progress report to his/her Supervisor with a copy to members of the GEC. ii. Plagiarism Test of students Ph.D. Thesis will be conducted by Supervisor and a certificate to this effect will be sent to the Controller of Examinations. iii. The Thesis submitted by a Ph.D. candidate shall comply with the following conditions: a. It shall form a distinct contribution to the body of knowledge and afford evidence of originality shown by the discovery of new facts, by the exercise of independent critical judgment, and/or by the invention of new methods of investigation. b. It shall not include the research work for which a Degree has already been conferred in this or any other University. c. It shall be written in English in accordance with the standard/approved format. d. Any part of the thesis which has been published before submission of the thesis will be reflected at the end of the thesis in the form of list of publications of the candidate. e. The thesis shall be typed on A4 (8.27 11.69) size paper with margins of 11/2 on the left and 1 to the right, top and bottom of each page. The Thesis shall be hard bound with skyblue cover and golden lettering on the front and the spine. iv. GEC will conduct initial evaluation of the thesis before submission it to Foreign Evaluators.
vi. There shall be a standing list of Ph.D. subject experts called as Foreign Evaluators for each Department consisting of persons of eminence in the respective field of Research. The list shall be suggested from time to time by the Board of Studies of the Department/Board of Faculty concerned and approved by the BASR. The Foreign Evaluators will be requested to evaluate the Thesis for its suitability for the award of a Ph.D. Degree. vii. The candidate shall in the first instance submit four unbound copies of his/her completed Thesis along with an application on prescribed Form, to the Controller of Examinations, for the evaluation of his/her Thesis duly forwarded by his/her Supervisor and the HoD. viii. The reports of the Foreign Evaluators shall be placed before the GEC for its consideration. ix. If the Thesis is adjudged as adequate/satisfactory by two of the three Foreign Evaluators, the GEC shall allow the candidate to appear in the Oral Defense (Thesis Defense) Examination. If two of the three Foreign Evaluators find the Thesis as wholly inadequate/unsatisfactory, it may be rejected by the BASR on the recommendation of the GEC. If any of the Foreign Evaluators finds the Thesis adequate but suggests minor modification/revision, this may be incorporated with the approval of the Supervisor.
x.
xi.
xii. If any of the Foreign Evaluators suggests major modification/revision of the Thesis, the candidate shall be required to resubmit a revised version of the Thesis duly certified by the Supervisor, within specified period. xiii. The revised version of the Thesis shall be approved by the same Examiner who suggested modification/revision of the Thesis.
v. Ph.D. thesis after conducting plagiarism test will be evaluated by three Foreign Evaluators from technologically advanced country/countries appointed by the Vice Chancellor as proposed by GEC and Supervisor from the approved list of Foreign Evaluators. 98
University on the recommendation of his/her Supervisor/Co Supervisor and HoD of the Department if the student; i. ii. Earns two consecutive adverse progress reports from his/ her Supervisor, Fails to contact his/her Supervisor for two academic semesters or leaves the Program without prior permission,
Library, the Department, the supervisor(s), HEC and the student. e. A candidate who successfully completes all the requirements shall be awarded, with the approval of the GEC, the Degree of Ph.D. under the Seal of the University. f. Evaluation report/result of the oral defense examination shall be prepared by the external examiner, supervisor and sent to the Controller of Examination through the HoD. Postgraduate Regulations
iii. Does not complete the course work with in prescribed period, iv. v. Does not qualify the Comprehensive Examination in two attempts, Found guilty of misconduct.
The aggrieved student may file a review appeal against cancellation of his Ph.D. registration to University of Wah. Review petition will be heard by independent review board constituted by the Vice Chancellor. The decision of review board will be final and binding for all parties.
b.
c.
d.
Summary
B.Sc. Engineering Degree
Admission (Eligibility Criteria) F.Sc. (PreEngineering)/A Levels/DAE with 60 % marks. Merit determined on the basis of 70 % F.Sc. marks & 30 % WEC Entry Test marks. UET Entry Test result is acceptable and such candidates will be exempted from WEC Entry Test. The degree for B.Sc. Engineering will be awarded after passing a minimum of 128 credit hours. Minmum 8Semesters, Maximum 14-Semesters.
3.1.1
Disciplines of Engineering
The degree for B.Sc. Engineering will be awarded after qualifying a minimum number of credit hours as prescribed by HEC/PEC. Presently the undergraduate admission is being offered in the following disciplines:
Discipline Electrical Engineering Mechanical Engineering Mechatronics Engineering Civil Engineering Chemical Engineering No of Seats 100 100 50 50 50
Note: Above seats include 2% for individuals with DAE and their merit is calculated separately.
3.1.3
Admission Criteria
Criteria for admission to various engineering disciplines and merit is calculated as follows: a. F.Sc. (or equivalent) : 70% (including Hafiz-e-Quran) b. Entry Test : 30% c. 10 marks out of the obtained marks will be deducted, from candidates qualifying the exam by parts or applying after three years of F.Sc.
in the college as well as on its website. Provisionally selected candidates will be issued selection letters on their mailing addresses with following instructions:a. Last date for fee submission. b. Joining instructions/documents to be provided before registration. (These instructions can also be downloaded from our website.) The names of provisionally selected candidates will be dropped from the merit list on expiry of last date for the fee submission. Candidates next on merit will be automatically provisionally selected and informed.
Undergraduate Regulations
3.1.5
a. The prospectus along with application forms can be purchased from accounts branch of the college using cash. The cost includes the processing fee, price of prospectus and the fee for the entry test. b. Application forms can also be downloaded from the website of the college and can be submitted to admission committee by post/courier. The candidate has to send pay order or draft in favor of Principal Wah Engineering College of the prescribed fee for processing and the prospectus will be provided to the candidate on demand on the day of entry test.
3.1.7
Entry Test
Appearing in the Wah Engineering College entry test or submission of the entry test result for UET arranged at the provincial level is a pre-requisite for further processing of the application. The college entry test will be from the subjects of physics, chemistry, mathematics and English of the F.Sc. Pre Engg level. The question paper will have total of 100 objective nature questions. The distribution of the question will be 25 from each subject. Each correct answer carries 4 marks. There will be no negative marking.
will be refunded tuition fee according to the HEC policy letter No. 10-1/HEC/A&C/2012/94 dated 11 September 2012. Undergraduate Regulations Fee Refund
a. b. c. Full Fee Refund Half Fee Refund No Fee Refund Up to 7th day of commencement of classes From 8th15th day of commencement of classes After 15th day of start of classes
as per the policy set by the college. The concept paper on student loan is available at (http://wecuw.edu.pk/sfao/wsf). Candidates who are unable to pursue their studies due to financial constraints can apply for the loan facility. The rules for the student loan can be obtained from (http://wecuw.edu. pk/sfao/wsf/rules). Main features of the policy are: 3.1.14.1 Eligibility a. Candidate has got admission on merit. b. Minimum 75% marks in the FSc or equivalent (unadjusted). c. Ready to repay the loan as per existing policy. 3.1.14.2 Procedure of Applying for Student Loan Facility Loan application forms complete in all respects shall be submitted with the admission form. The loan application forms can be downloaded from http:// wecuw.edu.pk/sfao/forms. The award of loan to the students will be decided by the Executive Committee instituted to manage the Wah Engineering College Student Fund (WSF). 3.1.14.3 Terms & Conditions The student loan facility is provided on following general terms and conditions: a. The loan shall be interest free. b. The student and his/her parents/guardian are required to sign a prescribed agreement on stamp paper/promissory note of appropriate value. c. The student or his/her parents/guardian are required to provide personal guarantee on a judicial paper or of a third person for repayment of loan. d. Loan may be granted for a maximum of four years provided the student's GPA does not fall below 3.0. e. Loan shall be repaid on monthly installments after six months of start of job or one year of graduation, whichever is earlier. f. The total amount of loan shall become
Note: All types of security fee will be refunded after adjustment of dues, if any.
* The committee may either grant 5% full fee concession or 10% half fee concession depending on the number and need of the applicant.
immediately due and payable to the College in case of cancellation of registration of the student due to any reason. g. The college reserves the right to withdraw/ suspend/cancel the student loan/financial assistance at any stage without assigning any reason.
the credit hour weighted average of the grade points earned for all the courses in a semester. 9. Cumulative Grade Point Average (Cum GPA): CGPA means the credit hour weighted average of the Grade Points earned for all the courses in all the semesters attended. 10. Mid-Semester Examination: Mid-semester Examination means the examination to be held after 8-9 weeks of teaching in case of regular semester and after 4-5 weeks of teaching in case of optional (summer) semester on such dates as the University may determine. 11. End Semester Examination: End Semester Examination means the examination to be held at the end of each semester on such dates as the University may determine.
Undergraduate Regulations
3.2.1 Definitions
1. Academic Program: An Academic Program means a program of studies, which leads to the award of a University Degree to the students after successful completion of all its requirements. Academic Year: An academic year shall consist of two regular semesters (Fall and Spring) and one Summer Semester (optional). Semester: A Semester means declared duration of 16 weeks of teaching for regular semester and 8-10 weeks in case of optional summer semester, including teaching, examination and semester break. Subject A Subject means a course of studies as prescribed in the detailed syllabi approved by the Competent Authority, whose successful completion shall be the requirement of the degree. Credit Hour: A Credit Hour means approximately 1 hour of theory lecture or 2-3 hours of practical work per week for the semester. Grade: A Grade means the letter grade earned by a student in a course depending on his/her performance in that course. Grade Points: Grade Points means the points (numerical values) associated with each letter grade. Semester Grade Point Average (SGPA): SGPA means
2. 3.
2. 3.
4.
4. 5.
5. 6. 7. 8.
6.
7.
days without any valid reason(s) he/she will be assumed to have dropped the semester. Undergraduate Regulations
3.2.3 Examinations
1. The examinations of the University will be conducted under the auspices of examination branch and shall be held on the specified dates according to the date sheet notified by the Controller of Examinations. 2. Practical examination will be held after the theoretical examination of the subject but in special cases, it may be held before the theoretical examination with approval of Controller of Examination. 3. For the purpose of practical examination, the Chairperson of the Department may divide candidates into subgroups on the recommendation of the course instructor. 4. A student shall be evaluated in each course on the basis of mid-semester examinations, quiz/class assignments/ project and end semester examinations as per the weightage given in next section. After evaluation the teacher will submit the award list of Mid semester Examinations. However, after End Semester Examinations the teacher will submit the consolidated result sheet, award list, answer books, and attendance sheet to the examination office within five days of the respective examination.
3.2.5 A student shall be eligible to appear in the End Semester Examination provided that:
i. He/she has been on the rolls of the University during that semester. ii. He/she has registered for the courses of study and attended not less than 80% of the lectures delivered in each course. The Vice Chancellor may condone the deficiency up to 5% of the total lectures delivered on the recommendation of Deans and Chairpersons. The students falling short of the attendance limit shall not be allowed to appear in the End Semester Examination of the concerned course and shall be treated as having failed in that course. iii. Any student who has not paid his/her fee, shall not be allowed to sit in the Mid Semester Examination and End Semester Examination. iv. Handicapped/disabled student shall be provided a writer by the University on the recommendation of Chairperson of the concerned Department. The writer shall be of a lower grade of education than the candidate. He/she would be allowed 45 minutes for solving paper over and above the time stipulated for question paper.
v. There shall be no re-evaluation of answer books. A student may, on payment of prescribed fee, within thirty days from the date of declaration of the result, get the answer book re-checked for any numerical error like transfer of marks and/or totaling which will be done by the Controller of Examinations, however, for the discrepancy like unmarked question/portion the case will be sent to the Chairperson of the concerned department. Errors and omissions, if any, shall be rectified. vi. The answer books used in the examination and the students attendance sheets after expiring of one year will be disposed of through open auction by inviting the local vendors.
3.2.11 Dismissal
i. The name of the student shall be removed from the roll of the university on second consecutive detention. ii. A student dismissed on academic grounds shall, however, be furnished with an official transcript indicating the courses completed along with grades earned in registered courses iii. A student who does not attend two semesters and is not in contact with the University management his/her name shall be struck off from the rolls of the university; however he/she may seek re-admission in the same semester(s) as and when offered.
Undergraduate Regulations
3.2.12 Re-Admission
Re admission in the first semester, without going through the admission process, is granted to only those undergraduate students who have been dismissed on academic grounds but only once. There is no second re-admission.
3.2.9 Probation
A student is said to be on probation if his /her semester GPA is less than 2.00.
3.2.18 Convocation
The University shall hold formal convocation periodically for the award of degrees and certificates to its graduates. The University may, however issue to them Provisional Certificates/Academic Degrees (on payment of prescribed fee) during the interim period between the graduation of a student and holding of the next convocation.
106
1. These rules shall be called the, University of Wah, Students General Discipline Rules2013. 2. These will come into force with immediate effect from the date of approval by the competent authority and shall have jurisdiction for both on campus and off campus cases. 3. Unless otherwise explained in the context or explicitly expressed, the following terms shall mean as defined in each case: Academic Department means an academic department of University of Wah. Campus means premises of the University of Wah and its constituent colleges. Committee means the Students Discipline Committee of University of Wah constituted under these rules. Constituent College means a constituent college of the University of Wah. Dean means Dean of respective faculty of University of Wah. Director Students Affair means Director Students Affairs of the University of Wah. Examination Hall means the centre for holding
examinations of the College/University. Hall of Residence means the hostels of University of Wah or such place as may be declared as residence for students. Head means the head of a teaching department of University of Wah. Senior Warden means senior warden of the hostels of the University and its constituent colleges. Students mean bonafide students of University of Wah both native and foreign in accordance with the respective rules. University means the University of Wah, Wah Cantt. ViceChancellor and other officers/authorities mean the ViceChancellor and other officers/authorities of the University of Wah. Note: The general pronoun he and its derivatives shall mean either of the sex unless otherwise explicitly expressed.
Code of Honor
4. Every student of University of Wah is an honourable student and must observe the following code of honor: 107
a. He/she must be faithful in his religious duties and respect the conviction of others in matters of religion and custom. General Discipline Rules b. He /she must refrain from doing anything which might lower the honor and prestige of the country. c. He/she must be truthful and honest in his dealings with all people. d. He/she must respect elders and be polite to all, especially women, children, old people, the weak and the helpless. e. He/she must respect his/her teachers and others in authority in the University. f. He/she must help his/her fellow beings especially those in distress. g. He/she must devote himself/herself faithfully to the studies. h. He/she must protect his/her and others property and the property of the University.
permission of the ViceChancellor or any officer authorized by the ViceChancellor. e. Stage, incite, participate in or indulge in any walkout, strike or other form of agitation against the University or its teachers or officers. Interfere in the official proceedings of the examination or other University business. Threatens or misbehaves with any teacher, officers or other employees of the University or try to influence such officers or employees in any way in connection with their official assignments. Instigate or take part in any boycott of examination or create disturbance in or around the examination hall. Abuse computer facilities and resources including, but not limited to: i. ii. Use of other individuals identification and/or password. Interference with the work of another student, faculty member, University official.
f.
g.
h.
j.
Code of Conduct
5. No student shall: a. b. Smoke on University Campus (University Campus is a smoke free area) Consume alcoholic liquor or other intoxicating drugs within the University Campus/College, hall of residence, examination hall, during the instructional sports, cultural tours, survey-camp, or enter any such tour or camp, while under the influence of such intoxicants. Organize or take part in any function within the University campus or a hall of residence or organize any club or society of students except in accordance with the prescribed rules and regulations. Collect any money or receive donations or pecuniary assistance for or on behalf of the University or any of the University organization except with the written
iii. Unauthorized entry into a file to use, read, or change the contents or for any other purpose. iv. Unauthorized transfer of a file. v. Sending oB.Sc.ene, abusive or threatening messages. vi. Transmission of computer virus. vii. Unauthorized access to, or unauthorized or malicious use of University computer equipment or networks, or electronic communication devices, or the use of such equipment or devices to gain unauthorized access to, and / or use of, off-campus computer equipment. viii. Unauthorized duplication of software or other violation of copyright laws.
c.
d.
108
ix. Interfering with normal operation of the University computing system. x. Indulging in cybercrime. 6. Make unauthorized access or entry to, or use of University facilities and equipment, unauthorized possession, duplication or use of keys to any University premises, facilities or equipment. 7. Intentionally and/or recklessly endangering, threatening, physical or verbal coercion, harassment, physical harm to any person, or oneself, in University premises or at University sponsored activities, using words or actions to provoke or encourage others to violent retaliatory behaviour, or other acts of misconduct. 8. Indulge in any theft, or attempted theft of property or services in University premises or at college-sponsored activities. 9. Intentionally and/or recklessly destroying or damaging, or attempting to destroy or damage University property or the property of others in University premises or at collegesponsored activities. 10. Indulge in any unauthorized and/or illegal exchange of money, favours or services as a result of an organized or unorganized game or competition. 11. Use mobile phone in class rooms, examination halls, labs and library thus disrupting the calm of the said rooms. 12. Every member of the teaching staff shall have the power (and it shall be his/her duty) to check disorderly or improper conduct or any breach of the rules by students occurring in any part of the precincts of the University. Should such misconduct occur in a class-room when the student is under the charge of any instructor/supervisor, the latter shall report the matter, without delay, to the Chairman of the Department. 13. The Librarian shall be responsible for maintenance of order in the library. In case of disorderly conduct or any breach of rules, he may require the student so offending to withdraw from the library for the remainder of the day
and shall immediately report the offense to the Chairman, Library Committee. 14. The Senior Warden and the Resident Tutor shall be responsible for the maintenance of order among the students in hall of residence or hostels. The Director, Physical Education/Chairman, Sports Committee shall be responsible for the maintenance of order among the students on or near the playground or while otherwise under his charge. Note A. i. Each member of the University community is issued a picture Identification/Registration card or visitors pass, and must wear it at all times while on University premises or at University-sponsored activities. Identification/Registration cards must be presented upon entering University premises and must be worn while on University premises. Identification/Registration cards are not transferable. The owner of the card will be called upon to account for any fraudulent use of his or her identification card and will be subject to disciplinary action by the University if he or she has aided such fraudulent use. The card will be forfeited if the student to whom it was issued allows any other person to use the same. Upon card owners withdrawal / rustication / expulsion from the University, all rights and privileges related to the identification card automatically cease. If the student withdraws, or is suspended or expelled, from the University, the identification card must be surrendered to the institute. No visitors and guests are allowed to enter in the University premises or at Universitysponsored activities without the written permission of responsible authority. All permitted/allowed visitors or invitees shall 109 General Discipline Rules
ii.
iii.
B. i.
i.
conduct themselves, at all times, in a manner which is consistent and in line with maintenance of orderly behavior in the University premises. General Discipline Rules
persons in authority in the University; or c. Habitually neglects his work or habitually abstains himself from his class without reasonable cause; or d. Willfully damages University property or the property of a fellow student or any teacher or any employee of the University; or e. Does not comply with the rules relating to residences in the hostels or hall of residence or the Rules relating to the wearing of uniform or academic dress; or f. Uses indecent language, wears un modest dress or makes indecent remarks or gestures or behaviour; or g. Does not pay the fees, fines or other dues liable, under the University Act, Statutes, Rules, Regulations or Instructions; or h. Commits any criminal, immoral or dishonourable act (whether committed within the University campus or otherwise) which is prejudicial to the interests of the University; or j. Humiliates, or causes to humiliate, misbehaves, uses abusive language or manhandles his fellow student or a teacher or officer or other employees of the University; or
k. Possesses, carries or uses any type of weapons/fire arms or explosive material within the University premises; or l. Spreads by word, mouth or written material, political, religious, sectarian, ethnic, regional or linguistic conflicts/hatred; or
m. Unauthorized uses or takes possession of the University transport; or n. Shows un modest/indecent or contraIslamic behaviour with fellow students.
Penalties
18. a. The penalty or penalties imposed shall be appropriate and proportional to the nature and gravity of the act. b. The penalties which may be imposed and the authority or authorities competent to impose each kind of penalty are specified in the table given below:
No. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) Penalty Exclusion from classroom, laboratory, workshop or field work for not more than two such consecutive periods. Exclusion from the game or the field for not more than one month. Exclusion from instructional or sports tour or survey camp. Exclusion from the department for a period up to one week. Exclusion from all classes or any class in any faculty for a period up to three weeks. Exclusion from the library up to two weeks. Exclusion from the hall of residence for a period up to one month. Exclusion from the hall of residence for a period up to six months. Suspension or removal from a position of authority in a hall of residence. Suspension or removal from a position of authority in the Students Council, if any. Suspension from a position of authority in the University sports. Cancellation or removal from a position of authority in the University Sports Fine up to Rs. 500.00 Fine up to Rs. 1000.00 Fine up to Rs. 3000.00 Fine up to Rs. 5000.00 Authority Competent to impose the Penalty Teacher In charge In charge of the game. Teacher In charge or Tour In charge. Head of the Department Dean of the faculty The Chairman Library Committee Resident Tutor. Senior Warden Resident Tutor, Warden, Senior Warden. Director, Students Affairs The Chairman, Sports Committee The Chairman, Sports Committee Lecturer / Resident Tutor Assistant Professor, Warden Associate Professor Head of a teaching department, Professor, Senior Warden, Director Students Affairs, Chairman, Transport Committee Discipline Committee Discipline Committee Dean of Faculty/Discipline Committee
Rustication from the University up to 2 years and fine without any limit. Expulsion from the University Withholding of results, certificates of good moral character, etc.
c. When a case against a student is referred to the Committee by the ViceChancellor, the Committee may, if it deems fit, suspend the student from University Rolls and/or direct him to vacate hall of residence till it has taken a decision in the case. 111
d. Notwithstanding anything contained in these rules, the ViceChancellor shall have the powers to impose any of the penalties mentioned in Sub Rule 18(b) or to refer the case to the Committee. e. The Principal of a constituent College/Director of a Campus shall have the powers to impose any of the penalties mentioned in Sub Rule 18(b) in his college/ campus f. A teacher or officer mentioned in these rules in whose presence or in relation to whom an act of indiscipline is committed or who obtains knowledge of such act on a report or otherwise, may deal with the case himself or if in his view: i. The case is one which can be more appropriately dealt with by another authority; or
Appeals
20. a. A review petition against the imposition of penalty may be made within a weeks time to the teacher/ officer who imposed the penalty. In case the student is not satisfied with his decision/revision he may appeal to the Chairman, Discipline Committee who shall place it before the Committee for its consideration and decision within a maximum of two weeks to dispose of the case. An appeal against the imposition of penalty by the Discipline committee may then be made to the Appeal Committee as provided in Rules 20b, given below. b. An appeal against a decision on imposing a penalty by the Discipline committee under Rule (17),(18) and (19) shall lie with the Appeal Committee comprising as mentioned below: 1) The ViceChancellor. 2) Principal of the constituent college. 3) All Deans of University of Wah. 4) One member to be nominated by the Academic Council. 5) Registrar shall be the Secretary of the Committee. c. No appeal shall lie against a decision of an authority imposing a penalty other than that mentioned in Rule 20a of these rules except on the ground that such authority has imposed a penalty which it was not competent to impose. d. No appeal by a student under Sub Rule (a) or Sub Rule (c) of this rule shall be entertained, unless it is presented within fifteen days from the date on which the decision is notified to him, provided that the ViceChancellor may, for valid reasons, extend this
ii. A penalty severer than that which he is competent to impose is called for in the case; Shall follow the procedure specified below: a. If he is not the Dean of the Faculty, he shall refer the case to the Dean who may deal with it himself or refer to the appropriate authority. b. If he is the Dean of the Faculty, he shall refer the case to the ViceChancellor University of Wah d. No student shall be rusticated or expelled from the University unless he has been allowed reasonable chance of replying (personal hearing) to the accusation against him. e. When in the opinion of the Committee, the penalty of rustication or expulsion is not called for in a case referred to it, it may impose any other penalty or penalties mentioned in the Rule 18b. 19. When a teacher or officer has imposed penalty/penalties on a student under Rule 18b, the latter shall not be liable to a higher or any additional penalty unless that the offending student has been given a reasonable opportunity 112
period up to thirty days. e. An appeal on the ground that an authority has imposed a penalty, which it was not competent to impose, shall lie with the ViceChancellor. 21. ViceChancellor or any teacher or officer to whom the ViceChancellor may delegate his powers, may direct a student to pay compensation for any loss, or damage to property belonging to the University or to a fellow student or to an employee of the University caused by a wilful act or gross negligence of the student and if the student does not pay such compensation within a time to be specified, the ViceChancellor may expel him from the University and loss/damage/compensation be recovered from his parents/ guardians through legal proceedings.
Dress Code In order to maintain academic dignity and sanctity of the University, students are required to wear a prescribed uniform approved by the University. The uniform restriction is not to impose any rigidity or regimentation but is in accordance with the spirit of discipline and punctuality.
Summer Dress
Boys White shirt with full sleeves, dark grey trousers, black belt, black socks and black shoes.
Winter Dress
Boys White shirt with full sleeves, dark grey woolen trousers, black belt, blue blazer (double breast)/ blue sweater, black socks, black shoes and college necktie White shirt with full sleeves, white shalwar, blue doptta and/or scarf, blue blazer (double breast)/ blue sweater, black socks, black shoes.
Girls
White shirt with full sleeves, white shalwar, blue doptta and/or blue scarf, black socks and black shoes.
Girls
Note: Male students shall maintain short haircut and shave regularly. Beards will be kept in a proper shape
114
FEE TARIFF
Fee Tariff
Breakdown One Time Fee Admission Registration Security (Refundable) Sub Total (A) Semester Fee Tuition Fee Sports Fee Library Fee Development Fee Welfare Fee Magazine Fee Examination Fee Lab Fee PRCS Donation Sub Total (B) Total (A+B)
Rs 22,000 2,000 10,000 34,000 54,000 650 650 6,000 1,300 275 1,000 5,500 50 69,425 103,425
Breakdown
MS/Ph.D. Engineering
One Time Fee Admission Registration Security (Refundable) Semester Fee Tuition Fee MS/Ph.D. (per CH) Semester Drop Fee (when applicable) Miscellaneous Fee Other Fee Ph.D. Thesis Evaluation Fee Extension of Thesis (Per Semester)
Payment of Dues
For the convenience of the student and to make the procedure transparent the Wah Engineering College has entered into a formal agreement with Bank Alfalah Limited, Wah Cantt Branch to deposit Wah Engineering College dues. Dues are to be paid at the time of registration for each semester. All students should register themselves for the relevant semester before the start of the semester. Students who do not get registered should not be allowed to attend classes. 115
B.Sc. Engineering
Wah Engineering College, Quaid Avenue, Wah Cantt, 47040. Tel: 05190552225354, Website: www.wecuw.edu.pk
116
DISCLAIMER
This prospectus is informational and should not be taken as a legal binding on the College/University. Each aspect of the educational set up, from the admission procedure or criteria to the examination, regulations or disciplines, requires continuing review by the competent authorities. The College/University, therefore, reserve the right to change any rules and regulations applicable to students whenever it is deemed appropriate or necessary. 117
WAH ENGINEERING COLLEGE Quaid Avenue, Wah Cantt, 47040. Tel: 05190552225354 Website: www.wecuw.edu.pk Price: Prospectus Rs. 1,500 + Processing Fee Rs. 500 = Total Rs. 2,000