Anda di halaman 1dari 9

2/19/2014

Cognos 8 and 10 Interview Questions ~ interview questions


Cognos PPT Cognos Scenarios Cognos FAQ Cognos Videos Chatting Social Media

Cognos 8 and 10 Interview Questions

About Me

SIVA M ANDALA
PO STED BY SIVA MANDALA O N 9:05 PM NO C O MMENTS

IBM COGNOS Certified Desginer, INDIA VI EW M Y C OMP LET E PROF I LE

Cognos 8 and 10 Interview Question


1) What is a Data Warehouse? A Data Warehouse is a collection of data marts representing historical data from different operation data sources (OLTP). The data from these OLTP are structured and optimized for querying and analysis in a Data Warehouse. 2) Define Cognos Report Net? Cognos Report Net is the web-based, dynamic, business intelligence reporting solution from Cognos. 3) What are the tiers of the ReportNet Architecture? The ReportNet architecture can be separated into three tiers: * Web server * Applications * Data

interview questions
cognos 2012 (67) December (67) Dec 13 (30) Dec 12 (30) Dec 10 (7) treeknox Cognos Interview Question and Answers.doc... A2Z Cognos Interview Question and Answers Cognos Interview Questions from Geek Cognos 10 new features Cognos 8 and 10 Interview Questions All Interview Cognos Questions Part 2 All Interview Cognos Questions Part 1

Total Pageviews

34610

4) Define Business Intelligence Business Intelligence is a broad category of application programs and technology used for query, Reporting and analyzing the business multi dimensionally. 5) What is a Data Mart? A Data Mart is a subset of a data warehouse that can provide data for reporting and analysis. 6) What is HPQS ? Data Marts are sometimes also called as HPQS (Higher Performance Query Structure). 7) What is multi dimension analysis? It is a technique to modify the data so that the data can be view at the different levels of details. cognosfaq.blogspot.in. Powered by Blogger .
Followers

http://cognosfaq.blogspot.com/2012/12/cognos-8-and-10-interview-questions.html

1/9

2/19/2014

Cognos 8 and 10 Interview Questions ~ interview questions


Join this site
w ith Google Friend Connect

8) What are the responsibilities of Cognos Administrator? A Cognos Administrator is assigned with following responsibilities. 1. Installations and configurations in distributed network environment. 2. Creating the Repository (Content Store). 3. Perform back up and recovery of Meta Data.4. Developing the user Administration.5. Tuning the servers.6. Deployment. 9) Responsibility of Cognos Architect? An Architect is responsible for designing the interface by fulfilling the user requirements.Once the interface has been designed it should be rigorously tested before distributing to the end user population. 10) Roles of the Application Developer? Design the Reports according to the Report requirement templates. Testing the each report with the following types of tests. a. Unit Testing b. System Testing c. Performance Testing 11) What is OLAP? OLAP stands for Online Analytical Processing. It uses database tables (Fact and Dimension tables) to enable multidimensional viewing, analysis and querying of large amount of data. 12) What are the types of OLAPs? 1. DOLAP:-The OLAP tool which works with desktop databases are called as DOLAP Ex:- FoxPro, Clipper, Dbase, Paradox. 2. ROLAP:-The OLAP tool, which works with Relational databases, are called as ROLAP. Ex:-Oracle, SQL Server, Tera Data, DB2. 3. MOLAP: - The OLAP MOLAP. Ex:- ESSBASE, Power Cube 4. HOLAP:- The OLAP tool which works with Relational databases and Multidimensional database, are called as MOLAP. Ex:- Cognos, Business Objects. 13) What is OLTP? OLTP stands for Online Transaction Processing. Except data warehouse databases the other databases are OLTPs. These OLTP databases are designed for recording the daily operations and transactions of a business. 14) What is an Interface? An Interface is a gateway between the user and database. An Interface contains a logical pointers which pointes to data in the Data Warehouse. An Interface is isolates the complexity and diversity if data bases. A good OLAP Interface writes an efficient SQL read on accurate data from database. An Interface needs to be designed by fulfilling the report requirement. 15) What is the role of a Data Warehouse in creating the Interface? Data Warehouse acts as Source to the Interface. 16) What are the types of components installed while loading the Cognos Report Net Software? When we install the Cognos Report Net Software there are two types of components get installed :1. Windows based components. 2. Web based components. 17) Define Windows based components? A Framework manager is windows based modeling tool used for creating a project (interface). 18) Define Web based Components? The following are the web based components. A. Cognos connection B. Query Studio C. Report Studio D. Analysis Studio tool, which works with Multidimensional databases, are called as

Members (9)

Already a member? Sign in

Follow by Email

Email address...

Submit

http://cognosfaq.blogspot.com/2012/12/cognos-8-and-10-interview-questions.html

2/9

2/19/2014
19) Components of Report Net: 1. Framework manager.2.

Cognos 8 and 10 Interview Questions ~ interview questions


Cognos connection 3. Query Studio 4. Report Studio

5.Transformer 6. Analysis Studio 20) What are the phases of the Cognos ReportNet Workflow? Plan, Manage, Model, Author, Consume. 21) What are the advanced features of Report Net? The Cognos Report Net has multilingual database accessibility. The parameter maps are key value phase, which are used for working with local Language that the default value is EN.

Framework Manager
22) What is Framework manager? Frame Work Manager is windows based metadata development or metadata modeling tool for Cognos Report Net. 23) Why we need Framework manager? To create the interface known as Project. To create model the metadata derived from one or more data sources 24) How a project appears in a FrameWork manager? A frame work manager project appears as a folder that contains a project file (.cpf) and the specific XML files that define the project. 25) What are the Building Blocks in Frame Work Manager? The Query subjects are called Building Blocks in Framework Manager. 26) What are phases the workflow process consists in Framework Manager? The workflow process consists of the following phases: * Design and create project > * Prepare Metadata >* Prepare the Business View * Create and Manger Packages >* Set Security > * Publish >* Manage the Project 27) How you set the security Framework manager? To set the security you have to set as:* Define access to packages. >* Create security filters > * Define access to objects >* Define package administration access 28) Define Name Space? In security, a collection of user accounts and user groups from an authentication provider.A Name Space is a container, which holds the Query Subjects.A Name Space uniquely represents the Query Subjects. 29) Can you delete Cognos namespace? No, we cannot delete Cognos namespace 30) What is the Cognos Namespace? And what it contains? The Cognos namespace is the ReportNet built-in namespace It contains Cognos objects: Groups , Roles, Sources, Distribution lists, Contacts 31) What are the Groups and Roles? Groups and roles represent collections of users that perform similar tasks. 32) What is Folder? A Folder is used to organize the Query Subjects. 33) Define Relationship? A Relationship is a connection that explains how the data in one Query Subject relates to data in other Query Subjects. 34) What is a Package? A container for models, reports, and so on. Modelers create packages in Framework Manager to publish models to the ReportNet server. 35) What is Physical layer?

http://cognosfaq.blogspot.com/2012/12/cognos-8-and-10-interview-questions.html

3/9

2/19/2014

Cognos 8 and 10 Interview Questions ~ interview questions

The Physical layer provides the physical query layer and is made up primarily of data source and stored procedure query subjects. It acts as the foundation for the presentation layer. 36) What is Presentation layer? The Presentation layer makes it easier for report authors to find and understand their data. The Presentation layer is made up primarily of model query subjects that you create. 37) Define function set: A function set is a collection of vendor specific database. The Expression editor lists the function sets for all available vendors. However, you can restrict the function sets, so that it lists only the vendors that you want to use in your project. 38) What is a Metadata? Data about data is called as Metadata. The Metadata contains the definition of a data. 39) What is a Project? When we work with a framework manager you work in a project. Project is a set of metadata organized for Report Authors according to the Business rules and Model. A Project created appears as folder, which contains following files. a. Project Name .CPF (Cognos Project File) > b. Model .XML > c. Preferences .XML d. Custom data .XML >The files in the folder are unique to that Project. 40) Define Publish? To transfer all or part of a Framework Manager model to the ReportNet server, so that report authors can use it. 41) What a Project contains? A. A Model > B. Namespaces > C. Data sources > D. Parameter maps > E. Packages F. Folders > G. Query Subject > H. Query Item >I. Relation ship 42) What is a Model? A model in Frame work manager is a business presentation of the structure of the data from one or more databases. Or A model is a set of related query subjects and other objects. 43) What are Dimensions? Dimensions are categories by which summarized data can be viewed. 44) What are Confirmed Dimensions? The Dimensions which are reusable and fixed in nature. 45) What are Fact Tables? A Fact Table is a table that contains summarized numerical (facts) and historical data. This Fact Table has a foreign key primary key relation with a dimension table. 46) What are the types of Facts? The types of Facts are: 1. Additive Facts:- A Fact which can be summed up for any of the dimension available in the Fact Table. 2. Semi-Additive Facts:- A Fact which can be summed up to a few dimensions and not for all dimensions and not for all dimensions available in the Fact Table. 3. Non-Additive Fact:- a fact which cannot be summed up for any of the dimensions available in the Fact Table. 47) Define Query? A description of the data to be retrieved from a database. 48) Explain about Data Source Query Subject? Data Source query subjects contain SQL statements the directly reference data in a single data source. Frame work manager automatically creates a data source query subject for each table and view that you import into model. 49) When the default data source query subject is created? During the initial metadata import operation, a default data source query subject is created for each object you select (for example table) and creates the default relationships between query subjects for you automatically.

http://cognosfaq.blogspot.com/2012/12/cognos-8-and-10-interview-questions.html

4/9

2/19/2014

Cognos 8 and 10 Interview Questions ~ interview questions

50) How can you edit the data source query subject? i. Apply or embed a filter > ii. Apply or embed a calculation > iii. Insert a Macro iv. Insert a data source reference. > v. Change the SQL type. > vi. Change how SQL is generated. >These all are we can find it in Edit definition window. 51) What are the types of SQL? SQL is the industry language for creating, updating and querying relational data base management system. Types of SQL. 1. Cognos SQL 2. Native SQL 3. Pass-through SQL. 52) Define Cognos SQL? By default Cognos FM uses Cognos SQL to create and edit Query subjects. Advantages: 1. Can contain metadata from multiple data sources. 2. Have fewer database restrictions 3. Interact more effectively with Cognos applications. Disadvantages: You can not enter nonstandard SQL. 53) Define Native SQL? Native SQL is the SQL, the data source uses, such as Oracle SQL, but you cannot uses Native SQL in a query subject that references more than one data source in the project. Advantages: 1. Performance is optimized across all related query subjects. 2. You can use SQL that is specific to your database. Disadvantages: 1. You cannot use SQL that the data source does not support for sub queries. 2. The query subject may not work on different database type. 54) Define Pass-Through SQL? Pass-Through SQL lets you use native SQL without any of the restrictions the data source imposes on sub queries. Advantages: 1. You can enter any SQL supported by the database. Disadvantages: 1. There is no opportunity for Frame work manager to automatically optimize performance. The SQL may not work on a different data source. 55) What are Query Processing Types? There are two types of query processing. 1. Limited Local: The database server does as much of the SQL processing and Execution as possible. However, some reports or report sections use local SQL processing. 2. Database only: The database server does all the SQL processing and execution with the exception of tasks not supported by the database. An error appears if any reports of report sections require local SQL processing. 56) What is Query Subject? A Query Subject maps to the table in the database. A Query Subject uses an SQL to retrieve the data from the data source. A Query Subject is also known as Business View. 57) What are the types of Query subjects? 1. Default data source query subjects 2. Model Query Subjects 3. Stored Query subjects 58) What is a Query Item? A query Item maps to columns to the database table. A Query Subject contains Query Items. 59) How can you restrict the tables retrieved by a query? By setting governors we can restrict the tables. 60) What is meant by Governors? To apply privileges and restrictions for a user class. Governor settings are used to set

http://cognosfaq.blogspot.com/2012/12/cognos-8-and-10-interview-questions.html

5/9

2/19/2014
restrictions on queries by user class, such as

Cognos 8 and 10 Interview Questions ~ interview questions

1. Sorting on non-indexed columns 2. Outer joins 3. Suppress duplicates 4. Cross-product queries 5. Retrieval of large text items 6. Number of records 7. Number of tables 8. Query execution time 61) What is a User Class? A defined group of users with the same data access needs, privileges and restrictions. 62) What is Scrubbing at Project level? According to the report requirements derive the new Items with the help of existing Query Items. This process is known as Scrubbing at Project level. 63) How can you add the calculated data to a report? a. Summarize existing detail values predefined summary functions (such as sum, avg) b. Create new report items using data from existing report items. c. Use model calculations provided in the package. 64) What are the sources to create new Query subjects? A new Query Subject can be created from the following sources. 1. Model (Query subjects & Query Items) 2. Data Sources (Tables and Columns) 3. Stored Procedure. 65) What is Multi Database Access in Cognos Report Net? In Cognos Report Net a Project can be created from multiple databases. The databases can be either homogenous or hydrogenous. 66) What are Parameter Maps? A Parameter Map is a key value pair used in creation of conditional Query Subjects. A Parameter map sub situates the values at the query at runtime. 67) What is the default formats of reports? HTML, PDF, CSV, and XML. 68) What are the different ways to modify multi lingual metadata? 1. Macro :- To modify dynamically 2. Directly 69) What is a Macro? A Macro is a runtime object, which uses the parameter maps and session parameters in developing the conditional query subjects. 70) What is usage property? And what are different setting to set usage property? It identifies the intended use for the data represented by each query item. It determines the aggregation rules of query items and calculations. The different usage property settings are: * Identifies * Fact * Attribute * Unknown 71) What are the types of filters in Framework manager? In framework manager we can create two types of filters. 1. Model filters 2. Query filters. 72) Define Model Filter? A filter is a condition used to restrict the data displayed in the Report. Model filter are reusable. 73) Define Data restriction: A filter is a condition, which restricts the amount of data displayed in the report. 74) What is condition? An expression that yields a Boolean value. Conditions are used in query expressions, query filters, and Boolean report variables that can be used for conditional formatting, styles, data sources, layouts and blocks. 75) Types of Conditions: Conditions are of 2 types: 1. Static Condition: - Condition doesnt change whenever you run the report. 2. Dynamic Condition: -A condition can be kept on change whenever you run the report.

http://cognosfaq.blogspot.com/2012/12/cognos-8-and-10-interview-questions.html

6/9

2/19/2014

Cognos 8 and 10 Interview Questions ~ interview questions

76) What are the types of filters in Report Studio? In the report studio we can find two types of filters. 1. Tabular Filters:- These filters are two types a. Summary Filters b. Detailed Filters 2. Grouped Filter 77) What is a Loop? A Loop is a closed path which is resulted due to joints. A Loop causes performance degradation of query execution and wrong data will be displayed in the report. A Loop can be resolved by creating the short cuts (Alias). 78) What is Alias Table? An alternative name for a table generally used in self joins. 79) What are the uses of Alias Table? The uses of Alias Table are :1. To resolve the Loops. 2. To create self-joins with in a table. 3. To Provide alternate join structure. 80) What is Associated Data Item? A Data Item linked to the group data item. Associated data item suppress duplicate data values but do not generate a control break. The associated column displays only one data values for the group with which it is associated. 81) What is Automatic Association? The group association of a newly created summary. The location of the group where you create the summary determines its automatic association. 82) What is an Ambiguous Relationship? An ambiguous relationship is where there are multiple relationship paths between one or more query subjects leaving multiple options for how to write a query. 83) What is a Join and types of Joins? A Join identifies the columns from one table that are used to link to another table. A Join is commonly formed by a foreign key definition within the database. Types of Joins :- 1. Equi-joins 2. Non equi-joins 3. Outer joins 84) What is a dimension? A broad grouping of descriptive data about a major aspect of a business, such as products, dates, or markets. Each dimension includes different levels of members in one or more hierarchies, and an optional set of calculated members. 85) What is a Confirmed Dimension? If a Dimension is connected to multiple fact tables then it is called as Confirmed Dimension. 86) What is a Junk Dimension? A randomly used dimension is Junk Dimension. 87) Define Surrogate Key? It has system-generated artificial primary key values, which allows to maintain historical records in the Data Warehouse more effectively. 88) What are the User Interface Components? * Cognos Connection * Report Studio * Query Studio * Frame work manager * Cognos configuration

1. What is significance of Framework Manager in Cognos Reporting?


ANS: Framework Manager is a metadata modeling tool. A model is a business presentation of the information in one or more data sources. When you add security and multilingual capabilities to this business presentation, one model can serve the reporting, ad hoc querying, and analysis needs of many groups of users

2. What is loop in framework manager?


ANS: Loop is closed path in IN FRAME WORK MANAGER DUE TO JOINS report net it called as ambiguous relationship. That means a query subject contains multiple paths to retrieve the data. It is an exception to resolve to create a shortcut on that query subject otherwise it displays wrong results in reports and performance is degrades.An undefined join between two tables is known as loop. To resolve loop delete the joins, if these joins are necessary

http://cognosfaq.blogspot.com/2012/12/cognos-8-and-10-interview-questions.html

7/9

2/19/2014

Cognos 8 and 10 Interview Questions ~ interview questions

then we have to create shortcuts nothing but alias tables. Place the joins in alias tables.

3. What are the filters in Framework Manager and Report Studio?


ANS: Filters in framework manager are 1. Standalone filters 2. Embedded filters Report studio Filters are 1. Detail filters 2. Summary filters

4. How to import two data sources into Framework Manager?


We can import two data sources to FM in the Run Metadata Wizard. Go to Run Metadata Wizard>Select another database ( e.g. suppose SQL Server is choosed in prior attempt, then u can choose Oracle as new datasource).Then import it

5. How to perform single sign on in Cognos by using URL?


In Cognos configuration under authentication allow anonymous access should be false. In cgi-bin properties (under iis) the enable anonymous access should be false.

6. What is usage property? Where do we set usage property?


1.The Usage Property identifies the use for the data represented by query item. It determines the aggregation rules of query items and calculations. The different usage property settings are Identifier, Fact, Attribute, Unknown 2. To set the usage property: Click the query item u want to set the usage property for Then click the properties icon on the tool bar or you can see the properties pane on the right side of the browser. Go to USAGE tab and click CLICK TO EDIT option. And select the appropriate.

7. What is the use of prompts in Framework Manager?


ANS: Use of Prompt in Framework Manager: Filter on query subject to restrict the rows that are returned by filtering out the unwanted data by creating one or more embedded filters for query subject. Prompt in filter with usage set to always user need to supply a value to filter.

8. Where exactly determinants are used in cognos framework manager?


ANS: A query subject that behaves as a dimension has multiple levels of granularity and will be joined on different sets of keys to fact data.

9. How would you structure your Framework Manager Model?


ANS: A model is normally structured into two layers/views. Database/ Physical view and Business/ Presentation view. These can be implemented using Namespaces. You import the metadata into Physical layer from DB using data source connection. You will use Import Metadata Wizard. You will change the Query Subjects & Query Items, create relationships (joins) and other activities here. In the Presentation layer, you create Query Subjects taking input from the existing Physical layer. You change the names of the Query Items and other cosmetic modifications.You can choose only the Presentation layer while creating the Packages and apply appropriate security settings.

10. How to provide security in frame work manager for a query subject?
ANS: Procedure for providing security for query subject in frame work manager is: Select querysubject -> in properties pane select ->security filters (clic k on edit)a specify data security wizard appears->click on add groups -> cognosnamesspace(select users and groups wizard opens)

11. How can we generate the cubes in framework manager?


ANS: You can create the IQD file from framework manager. This IQD file will be used by Transformer to create the cube.

12. How to generate IQD file from framework manager?


Create a Query Subject, from the properties pane select externalise, there we have 4 options in that select IQD.

Ne w e r P o s t

Ho me

Older Pos t

http://cognosfaq.blogspot.com/2012/12/cognos-8-and-10-interview-questions.html

8/9

2/19/2014
Comments 0 Comments

Cognos 8 and 10 Interview Questions ~ interview questions

Copyright 2011 interview questions | Design by: Siva Mandala

About | Contact | Write For Us | Archive

http://cognosfaq.blogspot.com/2012/12/cognos-8-and-10-interview-questions.html

9/9

Anda mungkin juga menyukai