Anda di halaman 1dari 76

Turni ng to

S O L A R T E C H N I K the sun
Energy of the future
Table of Content S O L A R T E C H N I K

Our corporate philosophy.................................................................................... 3


Directions/Map ............................................................................................................... 4
GEO-TEC in Spittal........................................................................................................ 5
High-Grade Steel Frame Collectors ............................................................ 6-14
Aluminium Frame Collectors ............................................................................. 15-22
Wood Frame Collectors ........................................................................................... 23-25
Solar Stations .................................................................................................................. 26-29
Accessories ......................................................................................................................... 30-35
Solar Control Modules ............................................................................................. 36-39
Storage Units, Buffers & Accessories ...................................................... 40-50
Storage Units and Heat Exchangers ......................................................... 51-52
Plate-type Heat Exchangers .............................................................................. 53
Tubing & Insulating Systems .......................................................................... 54-56
Stoves ....................................................................................................................................... 58-61
Trade Fair and Promotional Items ............................................................... 62
Solar Set ................................................................................................................................ 63
General Terms and Conditions of Business ........................................ 64-66
Solar Collector Systems ......................................................................................... 67
Trade Fair IHS 2007 ................................................................................................... 68-69
Tinox Absorbers ............................................................................................................. 70-71
S O L A R T E C H N I K

2 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Our corporate philosophy S O L A R T E C H N I K

GEO-TEC Solartechnik GmbH is a producer of high-


quality solar collectors. Our endeavour is to create a basis
of trust with our customers and to assist in solving their
problems. This is guaranteed by great development
competence, creativity and flexibility.

Our goal is total customer satisfaction. Customer orders


are treated with the utmost care. We strive for long term
partnerships by providing the highest quality products
and services.

Strict target specifications are applied to improve the


quality of our products and services such that positive
changes can be continuously compared and measured.
As a result, continuous quality improvements and
outstanding competitiveness are achieved. All
suggestions and recommendations are taken very
seriously and checked for their feasibility before
implementation.

Due to the nature of our products, the issue of


sustainability is always present. We are very conscious
of our ecological responsibility to our following
generations. In all of our business segments we make a
big effort to protect our resources and environment.

Subject to setting and printing errors. 3


Directions/Map S O L A R T E C H N I K

Directions to GEO-TEC :

GEO-TEC Solartechnik GmbH


Villacher Straße 95
A-9800 Spittal an der Drau

By car:
Autobahn A 10 (Tauern autobahn) - exit Spittal EAST (OST)
Take the first exit on the right onto the B B100 ("Drautal-Bundesstrasse").
Continue straight at the two roundabouts (the 2nd exit). on Villacher Strasse,
you will find us past the 1st traffic light to your right.

München

Salzburg

S O L A R T E C H N I K

Spittal/
Drau

Villach

4
S O L A R T E C H N I K

S O L A R T E C H N I K

High-rise rack warehouse Storage space

5
High-Grade Steel Frame Collectors S O L A R T E C H N I K

GSE 2000/TIN H/TIN Q

◆ A collector without covering frame for in-roof, (only GSE 2000/ TIN H) on-roof-mounted,
and flat-roof installation.
◆ Customised concatenation is possible (in parallel and in series)
◆ Connections: 3/4" screwed connection with high-temperature seal, flat-sealing

GSE2000/TIN H
◆ GEO-TEC high-performance collector, high-grade steel, „vertical“
◆ Up to ten collectors can be combined as a collector field.

GSE2000/TIN Q
◆ GEO-TEC high-performance collector, high-grade steel, „horizontal“
◆ Up to five collectors can be combined as a collector field.

Frame Roll-formed high-grade steel profile


Edge guard around the perimeter
Ventilation through specially designed
riveting nuts
Glass ESG solar glass
Glued frameless
Back panel Aluminium, 0.6 mm
Absorber Tinox, ultrasonic sealed
Manifold, 22 mm
Harp-shaped absorber pipes,
12/25 Stk. @ Ø 6 mm
Insulation Back panel: 40 mm rock wool
Sides: 10 mm rock wool
Connections 3/4" outside thread, 3/4" coupling ring
Assembly •In-roof design
•Roof-mounted, parallel to roof (hanger
bolts and/or roof bracket, fold clamp)
•Roof-mounted, raised
•Flat roof, standing
Dimensions Length: 1985 mm
Width: 985 mm
Height: 77 mm
Gross surface area 1,985 x 0,985 = 1,96 m2
Absorber area 1,955 x 0,955 = 1,87 m2
Collector volume 1 litre
Surface area utilised 96 %
Collector efficiency 81 %
Weight 36 kg
Verification Rapperswil C572
Verification Solar Keymark

Article number Article ID PU


500100 GSE2000/TIN H vertical-format collector 1 pallet 12 pcs
500101 GSE2000/TIN Q horizontal-format collector 1 pallet 12 pcs

6 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
High-Grade Steel Frame Collectors S O L A R T E C H N I K

GSE 2.0/TIN H

◆ A collector without covering frame for on-roof-mounted, and flat-roof installation.


◆ Customised concatenation is possible (in parallel and in series)
◆ Connections: 3/4" screwed connection with high-temperature seal, flat-sealing

GSE2.0/TIN H
◆ GEO-TEC high-performance collector, high-grade steel, „vertical“
◆ Up to ten collectors can be combined as a collector field.

Frame Roll-formed high-grade steel profile


Edge guard around the perimeter
Ventilation through specially designed
riveting nuts
Glass ESG solar glass
Glued without frame
Back panel Aluminium, 0.6 mm
Absorber Tinox, ultrasonic sealed
Manifold, 22 mm
Harp-shaped absorber pipes,
13 Stk. @ Ø 6 mm
Insulation Back panel: 40 mm rock wool
Sides: 10 mm rock wool
Connections 3/4" outside thread, 3/4" coupling ring
Assembly •Roof-mounted, parallel to roof (hanger
bolts and/or roof bracket, fold clamp)
or roof brackets, fold clamp)
•Roof-mounted, raised
•Flat roof, Standing
Dimensions Length: 2030 mm
Width: 1030 mm
Height: 77 mm
Gross surface area 2,1 m2
Absorber area 2,00 m2
Collector volume 1 litre
Surface area utilised 96 %
Collector efficiency 81 %
Weight 37 kg
Verification Rapperswil C572
Verification Solar Keymark

Article number Article ID PU


500110 GSE2.0 TIN/H vertical-format collector 1 pallet 12 pcs

Subject to setting and printing errors. 7


High-Grade Steel Frame Collectors S O L A R T E C H N I K

GSE 2400/ TIN H/TIN Q

◆ A collector without covering frame for in-roof, (only GSE 2400/ TIN H) on-roof-mounted,
and flat-roof installation.
◆ Customised concatenation is possible (in parallel and in series)
◆ Connections: 3/4" screwed connection with high-temperature seal, flat-sealing

GSE2400/TIN H
◆ GEO-TEC high-performance collector, high-grade steel, vertical
◆ Up to ten collectors can be combined as a collector field.

GSE2400/TIN Q
◆ GEO-TEC high-performance collector, high-grade steel, horizontal
◆ Up to four collectors can be combined as a collector field.

Frame Roll-formed high-grade steel profile


Edge guard around the perimeter
Ventilation through specially designed
riveting nuts
Glass ESG solar glass
Glued without frame
Back panel Aluminium, 0.6 mm
Absorber Tinox, ultrasonic sealed
Manifold, 22 mm
Harp-shaped absorber pipes,
12/31 Stk. @ Ø 6 mm
Insulation Back panel: 40 mm rock wool
Sides: 10 mm rock wool
Connections 3/4" outside thread, 3/4" coupling ring
Assembly •In-roof design
•Roof-mounted, parallel to roof (hanger
bolts and/or roof bracket, fold clamp)
or roof brackets, fold clamp)
•Roof-mounted, raised
•Flat roof, Standing
Dimensions Length: 2410 mm
Width: 985 mm
Height: 77 mm
Gross surface area 2.410 x 0.985 = 2.38 m2
Absorber area 2.380 x 0.955 = 2.273 m2
Collector volume 1.2 litre
Surface area utilised 96 %
Collector efficiency 81 %
Weight 44 kg
Verification Rapperswil C572
Verification Solar Keymark

Article number Article ID PU


500400 GSE2400/TIN Hvertical-format collector 1 pallet 12 pcs
500600 GSE2400/TIN Q horizontal-format collector 1 pallet 12 pcs

8 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
High-Grade Steel Frame Collectors S O L A R T E C H N I K

GSE 2000/ TIN SLIM

◆ A collector without covering frame for roof-mounted and flat-roof installation


◆ Connections: 3/4" screwed connection with high-temperature seal, flat-sealing

GSE 2000/TIN SLIM


◆ GEO-TEC high-performance collector, high-grade steel, horizontal
◆ Up to five collectors can be combined as a collector field.

Frame Roll-formed high-grade steel profile


Edge guard around the perimeter
Ventilation through specially designed
riveting nuts
Glass ESG solar glass
Glued without frame
Back panel Aluminium, 0.6 mm
Absorber Tinox, ultrasonic sealed
Manifold, 22 mm
Harp-shaped absorber pipe, 6 mm
Insulation Back panel: 40 mm rock wool
Sides: 10 mm rock wool
Connections 3/4" outside thread, 3/4" coupling ring
Assembly •Roof-mounted and parallel to roof
(with hanger bolts or roof brackets,
fold clamp)
•Roof-mounted, raised
Dimensions Length 1985 mm
Width: 385 mm
Height: 77 mm
Gross surface area 0.764 m2
Absorber area 0.691 m2
Collector volume 0.4 litre
Surface area utilised 96 %
Collector efficiency 75 %
Weight 16 kg
Verification Rapperswil C645

Article number Article ID PU


500200 GSE2000/TIN SLIM vertical-format collector 1 pallet 24 pcs

Subject to setting and printing errors. 9


High-Grade Steel Frame Collector S O L A R T E C H N I K

Connecting Materials

Connection Set, left/right


All parts made of brass, sensor immersion sleeve
soldered in, incl. high-temperature seals, design
for left or right solar forward flow.
All sealing points are flat-sealing. 3/4" connections
Consists of:
◆ Corner sleeve (3/4" coupling ring/ 3/4" outside thread, flat-sealing)
◆ Sensor right-angle connection (3/4" coupling ring/ 3/4" outside thread,
◆ Sensor immersion sleeve Ø 6.2 mm)
◆ Plug (3/4" outside thread, flat-sealing)
◆ End cap (3/4" internal thread , flat-sealing )

Article number Description


Sets:
11000100 Connection set for solar forward flow, left
11000200 Connection set for solar forward flow, right
Individual parts:
11000001 Right-angle connector, universal
11000006 Right-angle connector, universal, with coupling nut
11000021 Right-angle connector, right, with sensor immersion sleeve
11000022 Right-angle connector, left, with sensor immersion sleeve
11000003 End cap
11000004 End plug
11000005 High-temperature seal 3/4", 24 x 17 x 1.5 mm
510305 Sealing plates

Connection Hose Set


Consists of:
◆ High-grade steel corrugated tube DN 16, 1000 mm, 2x 3/4"
Natural rubber insulation 13 mm
◆ High-grade steel corrugated tube DN 16, 1000 mm, 2x 3/4"
Rubber insulation 13, with sensor cable drawn in,
PT1000 (silicon) 1500 mm
◆ 1 double nipple 3/4" flat-sealing
◆ 4 high-temperature solar seals
Transition to high-grade steel corrugated tube or copper tube by
means of Easy-Drill screwed connection (see delivery programme,
tube and insulating systems).
Plastic-wrapped as set, suitable for indoors and outdoors

Article number Article ID


11001000 Connection Hose Set

10 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
High-Grade Steel Frame Collectors S O L A R T E C H N I K

Installation Materials

HANGER BOLT System ROOF BRACKET System


◆ High-grade steel ◆ Aluminium base, 180 mm,
◆ Completely pre-assembled for installa- 50/40/10 mm perforated
tion of the aluminium T-profile with ◆ Aluminium bracket for mounting the
or without connecting profile aluminium T-profile with connecting
◆ Length : 350 mm, Ø 12 mm profile
◆ Aluminium clamp ◆ Complete with stainless steel
connecting bolts and aluminium
◆ EPDM tile sealing rubber
clamp-type holder
◆ Stainless steel nuts and shims

CONNECTING RAIL T-profile for mounting high-


grade steel frame collectors
VL H with vertical or horizontal
◆ Aluminium connecting rail for stabilising T-profiles
format
◆ 2163 mm for GSE 2000 H and GSE 2.0, 2588 mm for GSE 2400 H
◆ For fast mounting of flat collectors vertical ◆ Bare aluminium , in fixed lengths
◆ For roof bracket installation ◆ Slotted , 50 mm
◆ One connecting rail is required per collector ◆ Corrugated gripping side
◆ 50 x 50 x 5 mm
VLQ
◆ Aluminium connecting rail for
stabilising T-profiles
◆ 1163 mm for GSE 2000Q and GSE 2400 Q
◆ For fast mounting of flat collectors, horizontal
◆ For roof bracket installation
◆ Two connecting rails are required per collector.

Article number Description Dimensions


77000201 Roof bracket complete, preassembled
77000101 Hanger bolt, complete, pre-assembled
77082301 Connecting rail, vertical
77082302 Connecting rail, horizontal
77082305 Connecting rail for GSE 2400 H
520702 T-PROFILE for 2 vertical 2034 mm
520703 T-PROFILE for 3 vertical 3051 mm
520710 T-PROFILE for 6 vertical 6102 mm
520701 T-profile for 1, horizontal 2018 mm
520730 T-profile for 2, horizontal 4036 mm
520740 T-profile for 3, horizontal 6054 mm
520731 T-profile for 1 horizontal GSE 2400 2442 mm
520732 T-profile for 2 horizontal GSE 2400 4884 mm -

Subject to setting and printing errors. 11


High-Grade Steel Frame Collectors S O L A R T E C H N I K

Installation Materials

KV 2 Clamp Connector Set


◆ Clamp Connector Set for connecting aluminium T-profiles and FDRA
◆ 70 mm wide
◆ 2 drilled holes 12.5 mm
◆ With stainless steel bolts, nuts and shims

Fold clamp
◆ Bare aluminium
◆ 125 mm

Hanger bolt / flange plate


◆ High-grade steel
◆ Completely preassembled with flange and seal
◆ Length : 350 mm, Ø 12 mm

Article number Description


77000302 Clamp Connector Set (2 units)
77099503 Fold clamp
77000200 Hanger bolt/flange plate

METAL CLADDING SET (basic set & extended set)


for vertical-format collectors GSE 2000H and GSE 2400H
◆ Aluminium, "prefa brown"
◆ Packed in cardboard box with installation instructions
◆ Suitable for roofs with an incline of at least 30°
◆ Only for GSE 2000H and GSE 2400H
◆ Basic set for two collectors each
◆ Extension set for every additional collector

Article number Description Dimensions Weight


520500 Basic set GSE 2000H 200/350/2030 9 kg
520510 Extension set GSE 2000H 200/350/2030 3 kg

520520 Basic set GSE 2400H 200/350/2500 10 kg


520530 Extension set GSE 2400H 200/350/2500 4 kg

12 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
High-Grade Steel Frame Collectors S O L A R T E C H N I K

Installation Materials

Flat-roof open-frame set-up


◆ For flat roofs, industrial buildings, etc.
◆ For mounting on concrete base or I-beams
◆ The substructure, fastening and bracing have to be
provided by the customer.
◆ Statics-tested support structure
◆ Consists of aluminium angle profiles, 40/40/4mm, bare
◆ T-profiles are already included
◆ With stainless steel bolts and assembly instructions
◆ Partially pre-assembled
◆ Plastic-packed and labelled
◆ Sets for multiple collectors
Sets for various support structure variations:
◆ 2, 3 or 6 GSE 2000H 45°
◆ 2, 3 or 6 GSE 2000H 60°
◆ 2, 3 or 6 GSE 2400H 45°
◆ 2, 3 or 6 GSE 2400H 60°
◆ 1, 2 or 3 GSE 2000Q 45°

Article number Description Dimensions Weight


520410 FDFRA for 2 GSE 2000H 45° 2200/100/150 mm 15 kg
520420 FDFRA for 3 GSE 2000H 45° 3200/200/150 mm 20 kg
520432 FDFRA for 6 GSE 2000H 45° 6200/200/150 mm 40 kg

520460 FDFRA for 2 GSE 2000H 60° 2200/200/150 mm 15 kg


520480 FDFRA for 3 GSE 2000H 60° 3200/200/150 mm 20 kg
520470 FDFRA for 6 GSE 2000H 60° 6200/200/150 mm 40 kg

520440 FDFRA for 2 GSE 2400H 45° 2500/100/150 mm 17 kg


520450 FDFRA for 3 GSE 2400H 45° 3200/200/150 mm 22 kg
520900 FDFRA for 6 GSE 2400H 45° 6200/200/150 mm 44 kg

520200 FDFRA for 2 GSE 2400H 60° 2500/200/150 mm 17 kg


520201 FDFRA for 3 GSE 2400H 60° 3200/200/150 mm 22 kg
520210 FDFRA for 6 GSE 2400H 60° 6200/200/150 mm 44 kg

520430 FDFRA for 1 GSE 2000Q 45° 2200/200/150 mm 12 kg


520411 FDFRA for 2 GSE 2000Q 45° 4400/200/150 mm 24 kg
520400 FDFRA for 3 GSE 2000Q 45° 6200/200/150 mm 36 kg

520490 FDFRA for 1 GSE „SLIM“ 45° 450/200/150 mm 9 kg


520495 FDFRA for 1 GSE 2400Q 45° 2450/200/150 mm 24 kg
520496 FDFRA for 2 GSE 2400Q 45° 4900/200/150 mm 48 kg
Note:
For four collectors, be sure to use two double-unit sets + one KV 2 connection set.
For five collectors, use one double-unit set and one triple-unit set + one KV 2 connection set.

Subject to setting and printing errors. 13


High-Grade Steel Frame Collectors S O L A R T E C H N I K

Installation Materials

20° Inclination
◆ Can be used for each collector for
hanger bolt and roof bracket
◆ Bare aluminium, including high-grade
steel bolts and brackets

Note:
In the 20° INCLINATION
no T-profile, no connecting rail,
no roof bracket and no hanger
bolt are included!

Article number Description PU


77000401 20° Inclination for GSE 2000H per collector
520302 20° Inclination for GSE 2400H per collector
77000404 20° Inclination for GSE 2000Q and GSE 2400Q per collector

Concrete ballast
◆ Concrete block for stabilisation
of the substructure for collectors
(free-standing rooftop frame
installation)
◆ Weight per concrete base:
180 kg or 120 kg

Article number Description Type


77035500 Concrete ballast 180x26x16 per 0,18 tons vertical
77035501 Concrete ballast 110x26x16 per 0,12 tons horizontal

14 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Aluminium Frame Collectors S O L A R T E C H N I K

ALU 2000 H/Q/US

◆ A collector suitable for in-roof), modular collector field, on-roof-mounted and


flat-roof installation.
◆ Concatenation can be done serially or in parallel fashion.
◆ Connections: 3/4" screwed connection with high-temperature seal, flat-sealing

ALU 2000 H/US


◆ GEO-TEC high-performance collector vertical
◆ Up to 10 collectors can be connected in parallel fashion.

ALU 2000 Q/US


◆ GEO-TEC high-performance collector, horizontal format
◆ Up to 5 collectors can be connected in parallel fashion.

Frame Aluminium extruded profile, only one connec-


tion on the underside, complete frame bare
made of one bent piece of frame profile with
vents, high-temperature-resistant junction
seal
Glass ESG solar glass with high-temperature-
resistant seal pressed with aluminium profile
Back panel Aluminium/stucco
Absorber Tinox, ultrasonic welded
Manifold, 22 mm
Harp-shaped absorber pipe,
10/20 pcs @ Ø 8 mm
Insulation Back panel: 40 mm rock wool
Connections 3/4" outside thread, 3/4" coupling ring
Assembly •In-roof design
•Roof-mounted, parallel to roof (hanger bolts
or roof brackets, fold clamp)
•Roof-mounted, raised
•Flat roof, Standing
Dimensions Length: 2045 mm
Width: 1045 mm
Height: 76 mm
Gross surface area 2.045 m x 1.045 m = 2.144 m2
Absorber area 2.000 m x 1.000 m = 2.00 m2
Collector volume 1 litre
Surface area utilised 93.75 %
Collector efficiency 80%
Weight 37 kg
Verification Arsenal Research; No. 2.04.00201.1.0
Verification Solar Keymark (on order!)

Article number Article ID PU


77002002 ALU 2000 H/US Vertical-Format Collector 1 pallet 12 pcs
77003002 ALU 2000 Q/US Horizontal-Format Collector 1 pallet 12 pcs

Subject to setting and printing errors. 15


Aluminium Frame Collectors S O L A R T E C H N I K

ALU 2000 H/Q

◆ A collector suitable for in-roof, modular collector field, roof-mounted and flat-roof
installation.
◆ Concatenation can be done serially or in parallel fashion.
◆ Connections: 3/4" screwed connection with high-temperature seal, flat-sealing

ALU 2000 H
◆ GEO-TEC high-performance collector, vertical
◆ Up to 10 collectors can be connected in parallel fashion.

ALU 2000 Q
◆ GEO-TEC high-performance collector, horizontal format
◆ Up to 5 collectors can be connected in parallel fashion.

Frame Extruded aluminium profiles


Only one connection on the lower side
Complete frame bent from piece anodised
Frame profile with vents, high-temperature-
resistant junction seal
Glass ESG solar glass with high-temperature-resistant
seal pressed with aluminium profile
Back panel Aluminium/stucco
Absorber Tinox, soldered
Manifold, 22 mm
Harp-shaped absorber pipe,
10/20 pcs @ Ø 8 mm
Insulation Back panel: 40 mm rock wool
Connections 3/4" outside thread, 3/4" coupling ring
Assembly •In-roof design
•Roof-mounted, parallel to roof (hanger bolts
and/or roof bracket, fold clamp)
•Roof-mounted, raised
•Flat roof, Standing
Dimensions Length: 2045 mm
Width: 1045 mm
Height: 76 mm
Gross surface area 2.045 m x 1.045 m = 2.144 m2
Absorber area 2.003 m x 1.000 m = 2.00 m2
Collector volume 1 litre
Surface area utilised 93.75 %
Collector efficiency 80%
Weight 37 kg
Verification Arsenal Research; No. 2.04.00201.1.0
Verification Solar Keymark (on order!)

Article number Article ID PU


77002000 ALU 2000 Vertical-Format Collector 1 pallet 12 pcs
77003000 ALU 2000 Horizontal-Format Collector 1 pallet 12 pcs

16 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Aluminium Frame Collectors S O L A R T E C H N I K

ALU 450 Q

◆ A collector suitable for installation both roof-mounted and parallel to roof.


◆ Concatenation can be done serially or in parallel fashion.
◆ Connections: 3/4" screwed connection with high-temperature seal, flat-sealing

ALU 450 Q
◆ GEO-TEC high-performance collector, horizontal format
◆ Up to 5 collectors can be connected in parallel fashion.

Frame Extruded aluminium profiles


Only one connection on the lower side
Complete frame bent from piece anodised
Frame profile with vents
High-temperature-resistant junction seals
Glass ESG solar glass with high-temperature-resistant
seal pressed with aluminium profile
Back panel Aluminium/stucco
Absorber Tinox, soldered
Harp-shaped absorber pipe, 20 pcs @ Ø 8 mm
Insulation Back panel: 40 mm rock wool
Connections 3/4" outside thread, 3/4" coupling ring
Assembly •Installed in roof-mounted fashion or parallel
to roof (hanger-bolt and roof-bracket
installation)
•Roof-mounted, raised
•Flat roof, standing
Dimensions Length: 2045 mm
Width: 450 mm
Height: 76 mm
Gross surface area 2.045 m x 0.450 m = 0.921 m2
Absorber area 2.000 m x 0.405 m = 0.810 m2
Collector volume 0.6 litre
Surface area utilised 93.75 %
Collector efficiency 80%
Weight 17 kg
Verification Solar Keymark (on order!)

Article number Article ID PU


77000450 horizontal-format collector 1 pallet 24 pcs

Subject to setting and printing errors. 17


Aluminium Frame Collectors S O L A R T E C H N I K

Connecting materials

Connection Set, left/right


All parts made of brass, sensor immersion sleeve
soldered in, incl. high-temperature seals,
design for left or right solar forward flow.
All sealing points are flat-sealing. 3/4" connections

Consists of:
◆ Right-angle connector (3/4" coupling ring / 3/4" outside thread, flat-sealing)
◆ Sensor right-angle connection (3/4" coupling ring/ 3/4" outside thread,
◆ Sensor immersion sleeve (6.2 mm)
◆ Plug (3/4" outside thread, flat-sealing)
◆ End cap (3/4" internal thread, flat-sealing)

Article number Description


Sets:
11000100 Connection set for solar forward flow, left
11000200 Connection set for solar forward flow, right
Individual parts:
11000001 Right-angle connector, universal
11000006 Right-angle connector, universal, with coupling nut
11000021 Right-angle connector, right, with sensor immersion sleeve
11000022 Right-angle connector, left, with sensor immersion sleeve
11000003 End cap
11000004 End plug
11000005 High-temperature seal 3/4”, 24 x 17 x 1,5 mm
510305 Sealing plates

Connection Hose Set


Consists of:
◆ High-grade steel corrugated tube DN16, 1000 mm, 2x 3/4" coupling ring,
Rubber insulation 13 mm
◆ High-grade steel corrugated tube DN16, 1000 mm, 2x 3/4" coupling ring,
Rubber insulation 13, with sensor cable drawn in,
PT1000 (silicon) 1500 mm
◆ 1 double nipple 3/4" flat-sealing
◆ 4 high-temperature solar seals

Transition to high-grade steel corrugated tube or copper tube by means of


Easy-Drill screwed connection (see delivery programme, tube and insulating
systems).
Plastic-packed as set, suitable for indoors and outdoors

Article number Description


11001000 Connection Hose Set

18 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Aluminium Frame Collectors S O L A R T E C H N I K

Installation materials

HANGER BOLT System ROOF BRACKET System


◆ High-grade steel ◆ Aluminium base, 180 mm,
◆ Completely pre-assembled for instal- 50/40/10 mm perforated
lation of the aluminium T-profile ◆ Aluminium bracket for mounting the
with or without connecting profile aluminium T-profile with connecting
◆ Length : 350 mm, Ø 12 mm profile
◆ Aluminium clamp ◆ Complete with stainless steel
connecting bolts and aluminium
◆ EPDM tile sealing rubber
clamp-type holder
◆ Stainless steel nuts and shims

CONNECTING RAIL T-PROFILES FOR MOUNTING


aluminium frame collectors
VL H with vertical or horizontal
◆ Aluminium connecting rail for stabilising T-profiles format
◆ Length 2163 mm for ALU 2000H and ALU 2000H/US
◆ For fast mounting of flat collectors vertical ◆ Bare aluminium , in fixed lengths
◆ For roof bracket installation ◆ Slotted, 50 mm
◆ One connecting rail is required per collector ◆ Corrugated gripping side
◆ 50 x 50 x 5 mm
VL Q
◆ Aluminium connecting rail as per
drawing, bare
◆ Length : 1163 mm for ALU 2000H and ALU 2000H/US
◆ For fast mounting of flat collectors, horizontal
◆ For roof bracket installation
◆ Two connecting rails are required per collector.

Article number Description Dimensions


77000201 Roof bracket complete, preassembled
77000101 Hanger bolt, complete, pre-assembled
77082301 Connecting rail, vertical
77082302 Connecting rail, horizontal
77099407 T-PROFILE for 2, vertical 2162 mm
77099405 T-PROFILE for 3, vertical 3243 mm
77099403 T-PROFILE for 6, vertical 6486 mm
77099406 T-PROFILE for 1, horizontal 2081 mm
77099420 T-PROFILE for 2, horizontal 4162 mm
77099421 T-PROFILE for 3, horizontal 6243 mm

Subject to setting and printing errors. 19


Aluminium Frame Collectors S O L A R T E C H N I K

Installation materials

KV 2 Clamp Connector Set


◆ Clamp Connector Set for connecting aluminium T-profiles
◆ 70 mm wide
◆ 2 drilled holes 12.5 mm
◆ With stainless steel bolts, nuts and shims

Fold clamp
◆ Bare aluminium
◆ 125 mm

Hanger bolt / flange plate


◆ High-grade steel
◆ Completely preassembled with
◆ Length: 350 mm, Ø 12 mm

Article number Description


77000302 Clamp Connector Set (2 units)
77099503 Fold clamp
77000200 Hanger bolt/flange plate

METAL CLADDING SET (basic set & extended set)


for vertical-format collector ALU 2000H
◆ Aluminium, "prefa brown"
◆ Packed in cardboard box with installation instructions
◆ Suitable for roofs with an incline of at least 30°
◆ Basic set for two collectors each
◆ Extension set for every additional collector
◆ Metal cladding for horizontal-format collector available
◆ "Charcoal" metal cladding available on request

Article number Description Dimensions Weight


12801911 Basic Set ALU 2000H 200/350/2030 12,50 kg
12801901 Extended set ALU 2000H 200/350/2030 6,50 kg
12801916 Basic Set ALU 2000H übereinander 200/350/2030 12,50 kg
12801917 Extended set ALU 2000H übereinander 200/350/2030 6,50 kg
12800000 Cosmetic cover strip ALU 2000H 2 kg
12800002 Cosmetic cover strip ALU 2000Q 1,20 kg

20 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Aluminium Frame Collectors S O L A R T E C H N I K

Installation materials

Flat-roof open-frame set-up


◆ For flat roofs, industrial buildings, etc.
◆ For mounting on concrete base or I-beams
◆ The substructure, fastening and bracing have to be
provided by the customer.
◆ Statics-tested support structure
◆ Consists of aluminium angle profiles, 40/40/4, bare
◆ T-profiles are already included
◆ With stainless steel bolts and assembly instructions
◆ Partially pre-assembled
◆ Plastic-packed and labelled
◆ Sets for multiple collectors

Sets for various support structure variations:


◆ 2, 3 or 6 ALU 2000H 45°
◆ 2, 3 or 6 ALU 2000H 60°
◆ 1, 2 or 3 ALU 2000Q 45°

Article number Description Dimensions Weight


77024501 FDFRA for 2 ALU 2000H 45° 2200/100/150 mm 15 kg
77034501 FDFRA for 3 ALU 2000H 45° 3200/200/150 mm 20 kg
77064501 FDFRA for 6 ALU 2000H 45° 6200/200/150 mm 40 kg

77026001 FDFRA for 2 ALU 2000H 60° 2200/200/150 mm 15 kg


77036001 FDFRA for 3 ALU 2000H 60° 3200/200/150 mm 20 kg
77066001 FDFRA for 6 ALU 2000H 60° 6200/200/150 mm 40 kg

77014501 FDFRA for 1 ALU 2000Q 45° 2200/200/150 mm 12 kg


77000304 FDFRA for 2 ALU 2000Q 45° 4400/200/150 mm 24 kg
77001000 FDFRA for 3 ALU 2000Q 45° 6200/200/150 mm 36 kg

77045001 FDFRA for 1 ALU 450Q 45° 450/200/150 mm 9 kg

Note:
For four collectors, be sure to use two double-unit sets + one KV 2 connection set.
For five collectors, use one double-unit set and one triple-unit set + one KV 2 connection set.

Subject to setting and printing errors. 21


Aluminium Frame Collectors S O L A R T E C H N I K

Installation materials

20° Inclination
◆ Can be used for each collector for
hanger bolt and roof bracket
◆ Bare aluminium, including high-grade
steel bolts and brackets

Note:
In the 20° inclination no
T-profile, no connecting
rail, no roof bracket and no
hanger bolt are included!

Article number Description PU


77000401 Inclination 20° for ALU 2000H 1 Set/collector
77000404 Inclination 20° for ALU 2000Q 1 Set/collector

Concrete block
◆ Concrete ballast to stabilise the
substructure for collectors (free-
standing rooftop frame installation)
◆ Weight per concrete base:
180 kg or 120 kg

Article number Description Type


77035500 Concrete ballast 180x26x16 per 0.18 tons vertical
77035501 Concrete ballast 110x26x16 per 0.12 tons horizontal

22 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Wood Frame Collectors S O L A R T E C H N I K

IK 2000 / TIN H

IK 2000 / TIN H
The GEO-TEC high-performance collector with wood
frame and a collector area of 2.0 m², was designed
for in-roof installation and can be easily integrated
into the room on the roof battens, without a crane
for the installation. A maximum of six modules in
a row can be concatenated in serial order.

Frame Wood
Glass ESG solar glass , textured
Back panel Wood
Absorber Tinox, soldered
Manifold, 22 mm
Harp-shaped absorber pipes
10 pcs. @ Ø 8 mm
Insulation 50 mm rock wool
Connections 3/4" outside thread, flat-sealing
Sealing EPDM rubber profile, UV-resistant
Dimensions Length: 2010 mm
Width: 1000 mm
Height: 113 mm
Gross surface area 2.01 m2
Absorber area 1.79 m2
Collector efficiency 76 %
Collector volume 1.4 litre
Weight 43 kg
Verification Arsenal Research; No. 2.04.00110.1.0-1(2)

Article number Article ID PU


77030001 IK 2000 / TIN H wood frame collector 1 pallet 12 pcs

Subject to setting and printing errors. 23


Wood Frame Collectors S O L A R T E C H N I K

Installation materials

Covering Frame
A covering frame for tile or Eternit roofing, made of powder-coated sheet
metal; colour: charcoal; from roof inclinations of 30°.
The covering frames include the items required to install roof covering.

The Basic Set includes:


◆ 1 unit of sheet metal cladding for two collectors
◆ 2 side closing profiles
◆ 1 cover strip
◆ 1 sensor tube extension
◆ Installation Instructions The Extension Set includes:
◆ 1 sheet metal cladding for one collector
The Basic Set on top of one another includes: ◆ 1 cover strip
◆ 1 sheet metal cladding for 2 collectors
one above the other The Extension Set on top of one another includes:
◆ 2 side closing profiles ◆ 1 of sheet metal cladding for one collector,
◆ 1 cover strip on top of one another
◆ Installation Instructions ◆ 1 cover strip

Article number Description


77030511 Covering Frame Basic Set, 4 m², tile
77030521 Covering Frame Extended Set, 2 m², tile

77030516 Covering Frame Basic Set, 4 m², Eternit


77030526 Covering Frame Extended Set, 2 m², Eternit

77030841 Covering Frame Basic Set, on top of one another, 4 m²


77030846 Covering Frame Extended Set, next to/on top of one another, 2 m²

Collector connectors
Corrugated-tube collector connectors:
Flat-sealing screwed connection,
incl. insulation, for connecting collectors

Collector Terminal Connector


For connecting the forward and return flow for a collector field
Corrugated tube connection set:
flat-sealing, 3/4" connection, for connection in the attic space

Article number Description


77032001 Corrugated tube collector connector for IK2000
77032002 A corrugated tube connection set for IK2000

24 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Wood Frame Collectors S O L A R T E C H N I K

Installation materials

Planning Chart for Covering Frame Sets


(roof inclination from 30°)

C o l l e c to rs p e r row 1x2 1x3 1x4 1x5 1x6 2x2 2x3 2x4 2x5 2x6
Article number Description
TILE
77030511 IK2000 G 4 Z 1 1 1 1 1 1 1 1 1 1
77030521 IK2000 E 2 Z 1 2 3 4 1 2 3 4
77030841 IK2000 GÜ 4 1 1 1 1 1
77030846 IK2000 EÜ 2 1 2 3 4

ETERNIT
77030516 IK2000 G 4 E 1 1 1 1 1 1 1 1 1 1
77030526 IK2000 E 2 E 1 2 3 4 1 2 3 4
77030841 IK2000 GÜ 4 1 1 1 1 1
77030846 IK2000 EÜ 2 1 2 3 4

Planning Chart, Accessories


(not included in price)

Select the suitable collector connectors and connection sets


on the previous page.

C o l l e c to rs p e r row 1x2 1x3 1x4 1x5 1x6 2x2 2x3 2x4 2x5 2x6
Designation

Collector connectors 1 2 3 4 5 2 4 6 8 10
Connection set 2 2 2 2 2 4 4 4 4 4

Subject to setting and printing errors. 25


Solar Stations S O L A R T E C H N I K

Solar Pump Stations without Control Systems

SINGLE-LINE/DOUBLE-LINE PUMPING UNIT


Product description
The GEO-TEC Single-Line DN 25 Solar Station is a single-line The GEO-TEC Double-Line DN 25 solar station is a double-line
solar pumping unit with all the equipment necessary for ope- solar pump station for forward and return flow. All the fittings
ration. It installs in the return flow and is equipped with a Wilo necessary for operation are integrated. The forward-flow
ST 25/6 pump. The pump can be shut off by means of a ball line and the pump in the return-flow line can be completely
valve and a flowmeter that can be completely shut off, making shut off.
it possible to replace the pump with little effort. The unit is completely pre-assembled and inspected for leakage.

Fittings 2 gravity brakes


Flow meter
Rinsing and filling system
Safety device
Wall bracket
Complete insulation
Safety device Safety valve, 6 bar
Pressure gauge 10 bar
Connection for expansion tank to 60 litres
Pump WILO ST 25/6 (6 m delivery head )
130 mm installation length
Rated size DN 25
Connections 1" euro-cone for compression fitting
Gravity brake Brass
Cracking pressure: 20 mbar
With FlowUno in the forward flow, customers
must be very sure to install SKB!
Flow meter Measuring range from 2-15 litres
Suspended solid particles, serves as fast-acting
power brake for precise regulation of solar
collector systems
Fittings Brass
Seals EPDM/Teflon
Insulation EPP = 0.041 W/(m*K)
Max. pressure 10 bar
Max. temperature 120°, for a brief period 160°C
Single-line Centre-to-centre distance: 100 mm
Width of insulation: 180 mm
Height of insulation: 375 mm
Double-line Centre-to-centre distance: 100 mm
Width of insulation: 250 mm
Height of insulation: 375 mm
Double-line Built-in AIR-STOP to degas the heat-transfer
Special features medium
Forward flow and return with ball valves

Article number Description


14301002 Solar pumping unit, single-line DN 25 without control system
14301001 Solar pumping unit, double-line DN 25 without control system

26 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Solar Stations S O L A R T E C H N I K

Compact Solar Pump Stations with Control System

COMPACT WITH CONTROL SYSTEM


Product description

The GEO-TEC Compact Double-Line solar station includes a dou- grated. The forward-flow line and the pump in the return-flow
ble-line solar pumping unit and the GEO-TEC controllers SR1, line can be completely shut off.
SR2 or SR3, as desired. Due to the pre-assembled control system, installing the
This station is a double-line solar pumping unit for forward and station does not involve much, because parts are already
return flow. All the fittings necessary for operation are inte- pre-wired.

Fittings 2 gravity brakes


Flow meter
Rinsing and filling system
Safety device
Wall bracket
Complete insulation
Safety device Safety valve, 6 bar
Pressure gauge 10 bar
Connection for expansion tank to 60 litres
Pump WILO ST 25/6 (6 m delivery head )
130 mm installation length
Rated size DN 25
Connections 1" euro-cone for compression fitting
Gravity brake Brass
Integrated in thermal valves
Cracking pressure: 200 mm water column
Flow meter Measuring range from 2-15 litres
Suspended solid particles, serves as fast-acting
power brake for precise regulation of solar
collector systems
Fittings Brass
Seals EPDM/Teflon
Insulation EPP = 0 041 W/(m*K)
Max. pressure 10 bar
Max. temperature 120°, for a brief period 160°C
Dimensions Centre-to-centre distance: 100 mm
Width of insulation: 250 mm
Height of insulation: 375 mm
Special features Automatic air bleeder permanently built in
Forward flow and return with ball valves
Incl. compression fitting for 22 diameter

Article number Description


14301000 Compact solar pumping unit with SR1 single-circuit control module
14205001 Compact solar pumping unit with SR2 double-circuit control module
14206001 Compact solar pumping unit with SR3 multi-circuit control module

Subject to setting and printing errors. 27


Solar Stations S O L A R T E C H N I K

Freshwater Unit

GEO-TEC Regumag X-30 Freshwater Unit


Product description
The GEO-TEC Freshwater Unit is an inline heater with high capacity and very
convenient to operate for detached and semi-detached homes.
The GEO-TEC Fresh Water Unit reaches the standard capacity for a housing
unit already with primary forward flow temperature of just 60° C.
The GEO-TEC Freshwater Unit is especially well-suited for solar collector
systems.

Fittings High-grade steel plate heat exchanger


PTC controller
Rated size DN 25
Connections 1" outside thread, flat-sealing
1" euro-cone for compression fitting
Insulation Insulation made of EPP
Colour: charcoal

Storage unit
Storage unit
Tube connections High-grade steel, compact and space-saving
design
Calcification Calcification-proof to 35° C, Controller
Controller
100° C buffer temperature and 50° C
hot water tap temperature
Pressure stage PN 10
Max. temperature 120° C
Heat exchanger

CW static pressure 2.0 bar


Heat exchanger

Weight 30 kg
Connections 1" outside thread, flat-sealing
Dimensions with Height: 860 mm
cladding Width: 500 mm
Depth: 260 mm
Safety valve Drinking water circuit at 10 bar

Model: Regumaq X Model: Regumaq XZ

Article number Description


14002705 Freshwater unit without circulation pump X-30
14000025 Freshwater unit with circulation pump XZ-30

28 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Solar Stations S O L A R T E C H N I K

Solar Stratified Storage Unit

GEO-TEC Solar Stratified Storage Unit Regusol X-DUO 15/25


Product description
The GEO-TEC Solar Stratified Storage Unit is for loading a buffer storage
unit in optimum fashion in two levels.
This compact and entirely preassembled system is completely insulated,
has a generously dimensioned plate-type heat exchanger, is prewired with
a preset controller, enabling simple and fast installation and reliable
initial start-up.
The GEO-TEC Solar Stratified Storage Unit is equipped with a flowmeter as
standard. The control system is incorporated in the insulation invisually
appealing.
The entire station has a very sturdy design. Turbulent flow-through of the
plate-type heat exchanger provides for a good self-cleaning effect.

Pressure loss

Pressure flow
it
ircu
ry c

it
ircu
nda

ry c
eco

rima
q, s

q, p
uma

uma
Fittings 2 gravity brakes

Reg

Reg
Electronic three-way valve
Rinsing and filling system
Safety device
Wall bracket
Complete insulation
Safety device Safety valve, 6 bar, primary / 3 bar secondary
Pressure gauge
Pump UPS 15-60/130 (primary)
UPS 15-60/130 (secondary)
Connections Primary: 1" euro-cone for compression fitting
Secondary: 1" flat-sealing, outside thread
Insulation EPP = 0.041 W/(m*K)
Max. pressure Primary: to PN 6
Secondary: to PN 10
Max. temperature Primary: continuous operation 120°
Secondary: continuous operation 110°
Start-up temperatures to 160°C
Dimensions Total width: 560 mm
Total height: 860 mm
SSLE 30 To a max. of 30 m² of collector area
Flow rate, primary: 6 l/min
Flow rate, secondary: 5.4 l/min VFS: Flow rate und temperature sensor T3: Heat exchanger inlet to the storage unit
K1: Collector field T4: Lower storage unit temperature
SSLE 50 To a max. of 50 m² of collector area P1: Connection of pump to solar circuit T5: Middle storage unit temperature
Flow rate, primary: 10 l/min P2: Connection of pump to load circuit T6: Top storage unit temperature
Flow rate, secondary: 9 l/min SP1: Storage tank V1: Changeover valve for stratified loading
T1: Collector temperature HX: Heat exchanger
T2: Heat exchanger inlet from collector

Article number Description .


15000001 Stratified Storage Unit DUO 15 with control system
15000002 Stratified Storage Unit DUO 25 with control system
15000009 Stratified Storage Unit DUO 15 without control system
15000120 Stratified Storage Unit DUO 25 without control system

Subject to setting and printing errors. 29


Accessories S O L A R T E C H N I K

Accessories

Quick air-bleeder for solar systems


◆ R3/8"
◆ 10 bar
◆ 160°C
◆ With ball shut-off valve

High-Performance Air-Bleeder for solar systems


◆ R 1/2"
◆ 10 bar
◆ 180°C
◆ This automatic Quick Air-Bleeder is especially designed for
operation at high temperatures and glycol liquid in solar
collector systems.

Three-way valve, motor-controlled


◆ This is for changing over with storage unit loading
(bottom/top, buffer/boiler)
◆ Connection: 3 x 1" outside thread
◆ Supply: 230V/50 Hz

Utility Water Mixer


◆ For optimum premixing of the utility water temperature
◆ Protects against scalding by controlled maximum temperatures
◆ Connections: 1" outside thread
◆ Setting range: 30° C - 70° C

Article number Description

R ½" High-performance Air-Bleeder for solar systems


15000004 Quick air bleeder for solar systems R 3/8"
15000014
15000005 Three-way valve, motor-controlled
15001000 Utility Water Mixer
14100018 Compression clamp 18 mm (1 set = 4 pcs)
14100022 Compression clamp 22 mm (1 set = 4 pcs)

30 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Accessories S O L A R T E C H N I K

Flushing and Filling Station

Filling and Flushing Station for solar collector systems


◆ A compact flushing and filling station
◆ A powerful centrifugal pump provides for rapid and clean filling
of collector systems
◆ Built-in fine filter with sight glass
◆ Temperature-resistant hose to 60° C
◆ Handy hose rack
◆ Shut-off valve on canister drain
◆ Mounted on a sturdy, lightweight portable dolly
◆ A small particle filter before the pump makes it not only possible to
filter solder and selding residue out of the collector system, but also
to detect air bubbles in the line early .
◆ The canister is easy to remove for cleaning and has a large-size,
lockable filling opening. On-site mixing in a clean container is
possible when there is no ready-made medium available.

TECHNICAL SPECS ON PUMP:


Pump Self-priming centrifugal pump
Max. dry running: 1 min.
Incl. hoses for suction, pressure and flushing
Incl. screwed connections
Pump shaft Stainless steel
Casing Grey cast iron
Max. delivery rate 24.2 l/min
Max. pressure 5.9 bar
Motor 230 V, 1.7-m cable with plug
RPM 2850 min/-1
Temperature max. 60°C sustained loading
Special features Built-in fine filter with sight glass
Drains on the delivery side

TECHNICAL SPECS ON DOLLY:


Material Welded, sturdy, shaped frame
Dimensions Without hoses: 102x46x55 cm
Canister volume 30 litre
Canister UV-stable PE canister
Wide opening for filling with screw cap
Shut-off valve on drain

Article number Description


14000010 Flushing and filling station

Subject to setting and printing errors. 31


Accessories S O L A R T E C H N I K

Service Case for Fitters

A PVC case with all the parts necessary to service


collector systems

Content:
◆ Handheld refractometer
◆ Digital multimeter
◆ Pressure gauge
◆ Screwdriver with voltage detector
◆ pH-value checker
◆ Compass
◆ Inspection stickers and note stickers (12 of each)

Description:
The handheld refractometer determines the frost-resistance of
water/propylene-glycol, water/ethylene-glycol mixtures and the
density of water battery acid mixtures. The measuring range is 0°-50°C
for glycols.
The digital multimeter can be used to measure: direct current,
alternating current, direct voltage, alternating voltage, resistance,
temperature, positive diode voltage drop and hFE parameters for
transistors and continuity.
The inspection stickers and note stickers remind
A pressure gauge is for determining the inlet pressure on the expansion the customer of when the next servicing of its
tank. The measuring range is between 0-6 bar. collector system is due.
The phase tester can be used to quickly check whether there is pertinent Only regularly serviced collector systems can
voltage contacting the control system or its relevant components. function in an optimum and satisfactory fashion
The pH-value test strips allow simple determining the pH-value of the for years.
solar liquid. Warranty claims require that the collector
The compass can be used to check the exact alignment. system have been serviced.

Anti-freeze Protection Analysis Instrument in PVC Case


With one or two drops of test liquid, the handheld refractometer determines the
frost resistance of water/propylene-glycol, water/ethylene glycol mixtures and
the density of water battery acid mixtures.
Range of use for measurements of:
◆ Propylene glycol (solar, heating & cooling systems) 0° - 50° C
◆ Ethylene glycol (solar, heating & cooling systems) 0° - 50° C
◆ Battery acid (car battery) 1.15-1.30 g/chmA
◆ Windscreen water 0 to -40°C

Complete set consists of:


◆ 1 handheld refractometer, 1 screwdriver for adjusting the 0-line
◆ 1 pipette for sampling heat transfer medium, 1 cleaning cloth, 1 PVC box,
foam-lined

Article number Description


11000800 Test-kit case for collector systems
11000400 Handheld Refractometer/Anti-freeze Protection Analysis Instrument

32 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Accessories S O L A R T E C H N I K

Expansion Tanks

Expansion tanks for solar collector systems


◆ In accordance with DIN 4757
◆ Inlet pressure 2.5 bar

18-40 litres
◆ Suspended
◆ Galvanised steel flange
◆ Fixed nitrile membranes

Article number Litres Design max. bar Dimension Connection


15000018 18 l Suspended 6 bar 290 400 3/4”
15000025 25 l Suspended 6 bar 290 500 3/4”
15000040 40 l Suspended 6 bar 320 560 3/4”

GEO-TEC Connection Set


Optional for GEO-TEC FlowDuo and FlowUno solar pump stations, for expansion tank on
solar stations 3/4", for connection to the Safety Set, armoured safety house 500 mm,
wall bracket 210 mm x 250, rapid-action coupling and installation materials.

Article number Description


14000004 Connection set for expansion tank, 18-40 litres

60-80 litres
◆ Standing
◆ High-grade steel
◆ Replaceable nitrile membranes

Article number Litres Design max. bar Dimension Connection


15000060 60 l Standing 6 bar 380 730 3/4”
15000080 80 l Standing 6 bar 450 735 3/4”

Service Coupler
◆ Service coupler especially for solar expansion tanks
◆ 3/4" for 60- and 80-litre expansion tanks

Article number Description


15005302 Service coupler for 60 litre expansion tank

Subject to setting and printing errors. 33


Accessories S O L A R T E C H N I K

Expansion Tanks

100-300 litres
◆ Standing
◆ High-grade steel
◆ Replaceable nitrile membranes

Article number Litres PROCEDURE max. bar Dimension Connection


15000100 100 l Standing 6 bar 450 790 1”
15000200 200 l Standing 6 bar 550 1080 1½”
15000300 300 l Standing 6 bar 630 1177 1½”

Expansion Tanks for Heating Systems


◆ With standing design ◆ Replaceable nitrile membranes
◆ High-grade steel ◆ Inlet pressure 1.5 bar

Article number Litres PROCEDURE max. bar Dimension Connection


15200060 60 l Standing 6 bar 380 550 1”
15200080 80 l Standing 6 bar 450 735 1”
15200100 100 l Standing 6 bar 450 790 1”
15200150 150 l Standing 6 bar 550 800 1½”
15200200 200 l Standing 6 bar 550 1080 1½”
15200250 250 l Standing 6 bar 630 984 1½”
15200300 300 l Standing 6 bar 630 1177 1½”
15200400 400 l Standing 6 bar 630 1540 1½”
15200500 500 l Standing 6 bar 780 1540 1½”

34 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Accessories S O L A R T E C H N I K

Heat Transfer Medium

Propylene glycol
Specifications:
◆ Colour: colourless
◆ Vapour pressure at 20° C: 23 mbar
◆ Density (20° C) 104 - 106 g/cm3
◆ No irritant effect

Characteristics:
◆ An odourless, hygroscopic liquid
◆ Based on 1.2-propylene glycol
◆ Food-safe
◆ Protects through special inhibitors against corrosion, aging and encrustation
◆ Completely mixable with water
◆ No nitrite, phosphate or amine
◆ Mixes with all common commercially available antifreeze agents based on 1.2-propylene glycol
◆ Biologically degradable

Application:
◆ No sustained temperatures over 170 C as this would result in aging of the antifreeze medium.
◆ Do not use with heat exchangers galvanised on the primary side.

Storage:
◆ Only store in the original container.
◆ Three-year shelf life

Disposal:
◆ In accordance with ÖNORM S 2100

Waste key number:


◆ 55370

Article number Description Container


15100030 Heat transfer concentrate of propylene glycol 10 kg

15100040 Heat transfer mixture of propylene glycol 10 kg


15100050 Heat transfer mixture of propylene glycol 25 kg

Subject to setting and printing errors. 35


Solar Control Modules S O L A R T E C H N I K

System Control Modules

Pico System Controller


◆ A simple controller, the Pico impresses people with simple
adjustment.
◆ With the Pico, you're guaranteed an easy overview of
temperature readings and the system's operating modes.
◆ This control module has a small LCD display via which you
set the maximum temperature and temperature difference.
◆ Two trimmers for adjusting maximum temperature and
temperature difference (PICO Standard).
◆ With the design with an LED and LCD, the exact adjustment
can be made from the outside with one button.

Design PICO Standard PICO Info PICO Comfort


Solar scheme (1 collector, 1 storage unit) X X X
Difference controller scheme (reloading function) x x X
Return flow temperature booster scheme X X DIP switch
Heating DIP switch scheme X X
Cooling DIP switch scheme X X
Frost protection function can be connected Jumper Jumper DIP switch
Speed control can be connected - - DIP switch
System safeguard X X X
Circulation monitoring system, dT-criterion X X X
Sensor monitoring, interruption/short circuit X X X
Quantity of outputs 230 Volts 1 1 1
Quantity of sensor inputs 2 2 2
LED display (red-green) 2 2 2
LCD display 11
Parameter setting Two trimmers Button + display Button + display
Dimensions W = 75 mm, H = 93 mm, T = D0 mm
Weight approx 150 g
Protective system IP41
Circuitry output 1 x 230V/AC - 1A 1 x 230V/AC – 1A
Speed-controlled
Temperature inputs 2 x for PT1000
Temperature for use 0°C to –50°C

Article number Description


17000010 GEO-TEC Pico Standard
17000008 GEO-TEC Pico Info
17000009 GEO-TEC Pico Comfort

36 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Solar Control Modules S O L A R T E C H N I K

Single/Double-Circuit Control Modules

Temperature Difference Controller SR I/ SR II


This generation of controllers is designed to optimise the output
of thermal collector systems.
The model SR I controlls collector systems with a maximum of
one collector field and one storage unit.
Model SR II can control one collector field with one storage unit,
one collector field with two storage units or two collector fields
with one storage unit.

Functions
◆ Monitoring of the sensors and circulation
◆ The outlet for the pump (speed-controlled, of course)
can be set manually for installation or service work.
◆ Implemented safety functions: system safeguard,
Collector safeguard, Recooling

Display Large LCD display


Pictograms
Items included Control system
Operating instructions
Instructions for getting started
Fuse
NO sensors or cables!
Casing Flips open and locks in position
The top piece is removable.
Cables Plug-in flat-cable connections
Installation By brackets
Operation By four-button panel
Standard functions of the SR 1 System safeguarding function
Collector safeguarding function
Manual Operation
Recooling function
Speed control
Standard functions of the SR 2 System safeguarding function
Collector safeguarding function
Manual Operation
Recooling function
Speed control
Metering of energy produced
Antifreeze function
Pipe-collector function
2 temperature difference controllers
Reheating / thermostat function

Article number Description


17000001 GEO-TEC Single-Circuit Control Module
17000002 GEO-TEC Double-Circuit Control Module

Subject to setting and printing errors. 37


Solar Control Modules S O L A R T E C H N I K

System Control Modules

System Controller SR III


The SR III system controller impresses people with simple operation in spite of va-
ried control possibilities. Schemes can be selected and additional multifunction
controllers freely assigned.
With the SR III, up to three energy output terminals and two energy generators
(collector fields) can be controlled in optimum fashion.
This control system also has a data interface via which a data stick can be used to
install various special purpose programmes on the controller.
The controller has ten inputs for PT PT1000, three of which are optional for digital
input or radiation sensors, six 230V/ AC outputs, all with RPM control.

Display Large LCD display


Selectable language
Items included Control system
Operating instructions
Instructions for getting started
Fuse
NO sensors or cables!
Casing Flips open and locks in position
The top piece is removable
Cables Plug-in flat-cable connections
Installation By brackets
Operation By four-button panel
Standard functions Manual operation
Pipe-collector function
Collector safeguarding function
Recooling function
System safeguarding function
Antifreeze function
Circulation
Alarm
Timer
Thermostat function
Threshold switch
Return flow temperature booster
Wood-powered boiler function
Temperature difference controller
Radiation sensor function
Pump safeguarding function
Data logging
Multifunction controller
Metering of energy produced
Anti-legionella function
Heating circuit function Triggering of mixer & pump
Adjustment to forward flow temperature
or room temperature
Triggering of hot water supply

Artikelnummer Beschreibung
17000003 GEO-TEC Mehrkreisregelung

38 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Solar Control Modules S O L A R T E C H N I K

Accessories

Temperature sensor
Storage unit sensor: PVC 6x25 mm or 8x25 mm with 2,5 m PVC-coated cable
Can be used up to +105° C, taking the installation instructions into account.

Collector sensor: PT PT1000 6x25 mm or 8x25 mm with 2.5 m silicon cable and teflonised strands
Can be used up to +250° C, taking the installation instructions into account.

112 mm long, R ½", temperature range -40° C to +200° C


IMMERSION SLEEVE made of brass

Length immersion sleeve: 94 mm; diameter: 6 mm; material: CuZn39Pb3.

Sensor connection socket


Sensor connection socket with built-in voltage surge protection
Filters out a certain part of atmospheric excess voltage.
The collector sensor can be extended simply and safely.
Includes brackets for simple wall mounting
Casing: Plastic, grey, protective system IP 65
Measurements: 80 mm x 80 mm x 50 mm
Temperature range: -25°C to +70°C

Article number Description


17000200 Storage unit sensor 6 mm
17000400 Storage unit sensor 8 mm
17000100 Collector sensor 6 mm
17000600 Radiation sensor
17000300 Brass immersion sleeve: 112 mm
17000005 Sensor connection socket

Output Metering Module


Can only be used in combination with an SR II/SR III!!
◆ Horizontal or vertical installation
◆ Operating pressure: to 16 bar as per DIN 2401; hot water to 90° C
◆ Up to a Qn of 1.5 m3/h
◆ Contact loading: 24V (without dropping resistor)
◆ The contact maker is equipped with a 100 Ω 1/4 W protective resistor for volumetric
flowmeters, 0.2 A (protective low voltage)
◆ State-of-the-art single-jet rotary vane meter with fully dry running meter and magnetic
coupling
◆ To rule out interference by impure water, only the impeller wheel operates in the wet area.
◆ The counter turns for easy reading.
◆ A shielding cap that can be sealed with lead protects against magnetic influences

Article number Description


17000500 Output metering module to 1.5 m3/h
17000006 DATA STICK for SR III
17000007 PC-USB interface

Subject to setting and printing errors. 39


Storage Units, Buffers & Accessories S O L A R T E C H N I K

Solar Storage Unit SSH-PU

Product description:
◆ A standing storage unit made of S235JRG steel with two large-surface bare-tube heat exchangers
◆ Inside: enamelling in accordance with Part 3 of DIN 4753; outside: primer-coated
◆ 1 1/4" protective magnesium anode to complete the cathodic corrosion protection as per Part 6
of DIN 4753
◆ Sensor tube included
◆ Comes with thermometer (separate package)
◆ A 1 1/2" sleeve is provided as standard for retrofitting an electric heating system.
◆ Inspection opening 180 x 110 x hole diam. 150
◆ All outside thread, flat-sealing
◆ CFC-free 50-mm PU rigid-foam insulation with casing made of lined, coloured plastic in
accordance with Part 8 of DIN 4753, RAL colour silver 9006
◆ Pressure resistance 10 bar

Storage unit model SSH-PU 200 SSH-PU 300 SSH-PU 400 SSH-PU 500
Volume [litres] 200 300 400 500
Diameter without insulation [mm] 500* 500* 600* 650*
Diameter with insulation [mm] 600 600 700 750
Insulation [mm] 50* 50* 50* 50* 50*
Height with insulation [mm] 1232 1697 1660 1783
Tilting height [mm] 1370 1800 1800 1970
Heating surface, top/bottom [m2] 0,6 / 0,8 0,8 / 1,2 1,0 / 1,5 1,2 / 1,8
Water volume, HX, top/bottom [litres] 3,8 / 5,0 5,0 / 7,5 6,3 / 9,4 7,5 / 11,3
Volume flow, HX, top/bottom [m³/h] 0,7 /1,2 1,0 / 1,6 1,2 / 2,0 1,4 / 2,4
Water volume, HX, top/bottom [mbar] 30 / 70 35 / 90 45 / 120 55 / 250
Rated output figure** top/bottom as per DIN 4708 1,23 / 3,6 1,8 / 8 2,1 / 11 2,5 / 14
Continuous operation, top/bottom
As per DIN 4708 (10/80/45) °C [l/h] 410 / 710 605 / 970 720 / 1180 830 / 1400
max. T/max. PTW [°C / bar] 95 / 10 95 / 10 95 / 10 95 / 10
max. T/max. P Heating*** [°C / bar] 160 / 25 160 / 25 160 / 25 160 / 25

G¾ G¾ G¾ G¾
Cold/hot water, outside thread, (CW/HW) [inches] G1 G1 G1 G1

G¾ G¾ G¾ G¾
Circulation, outside thread (circ.) [inches]
Heat exchangers, all outside thread (FF/RF) [inches]
Electric heating, inside thread (E-heating) [inches] G 1½ G 1½ G 1½ G 1½
Nominal diameter of inspection flange (RFL) DN 110 DN 110 DN 110 DN 110
Sensor/controller connections (F1, F2) Sensor sleeve, internal diameter 9 mm
Thermometer connection M8 Thermometer option

Dimensions SSH-PU 200 SSH-PU 300 SSH-PU 400 SSH-PU 500 Article number Description
CW [mm] 110 110 127 128 13100200 Solar Storage Unit 200 l with PU insul.
RF1 [mm] 180 180 205 205 13100300 Solar Storage Unit 300 l with PU insul.
FF1 [mm] 630 580 635 685 13100400 Solar Storage Unit 400 l with PU insul.
RF2 [mm] 780 945 965 1020 13100500 Solar Storage Unit 500 l with PU insul.
Z [mm] 880 1045 1065 1125
FF2 [mm] 990 1215 1261 1325
HW [mm] top
* Insulation not removable!
El. heating [mm] 705 770 770 920 ** To achieve the rated output figure cited, the boiler output has to be greater than the
Weight [kg] 85 114 166 215 continuous operation specified.
*** Only with water in the liquid state as the operating medium for the heat exchangers

40 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Storage Units, Buffers & Accessories S O L A R T E C H N I K

Solar Storage Unit SSH-WS

Product description:
◆ A standing storage unit made of S235JRG steel with two large-surface bare-tube heat exchangers
◆ Inside: enamelling in accordance with Part 3 of DIN 4753; outside: primer-coated
◆ 114" protective magnesium anode to complete the cathodic corrosion protection
◆ Optional with external current anode in accordance with Part 6 of DIN 4753
◆ Temperature sensor, variably positionable by means of sensor terminal strip
◆ Comes with thermometer (separate package)
◆ A 1 1/2" sleeve is provided as standard for retrofitting an electric heating system.
◆ Inspection opening
◆ All outside thread, flat-sealing
◆ CFC-free 80-mm PU flexible foam insulation with PVC top coat, incl. floor insulation
(100 mm thick) in accordance with Part 8 of DIN 4753, RAL colour silver 9006
◆ Pressure resistance 10 bar

Storage unit model SSH-WS 750 SSH-WS 1000


Table of Contents [litres] 750 1000
Diameter without insulation [mm] 750 900
Diameter with insulation [mm] 950 1100
Insulation [mm] 100 100
Height with insulation [mm] 2082 2010
Tilting height [mm] 2050 2020
Heating surface, top/bottom [m2] 1,9 / 2,7 1,9 / 2,9
Water volume, HX, top/bottom [litres] 16,0 / 22,8 16,0 / 24,5
Volume flow, HX, top/bottom [m³/h] 2,1 / 4,2 2,1 / 4,6
Pressure loss, HX, top/bottom [mbar] 40 / 180 40 / 200
Rated output figure** top/bottom as per DIN 4708 13 / 35 13 / 41
Continuous operation, top/bottom as per DIN 4708 (10/80/45) °C [l/h] 1220 / 2470 1220 / 2690
max. T/max. P TW [°C/bar] 95 / 10 95 /10
max. T/max. P heating*** [°C/bar] 160 / 25 160 / 25

G¾ G¾
Cold/hot water, outside thread, (CW/HW) [inches] G 1½ G 1½
Circulation, outside thread (circ.) [inches]
Heat exchangers, all outside thread (FF/RF) [inches] G 1¼ G 1¼
Electric heating, inside thread (el. heating) [inches] G 1½ G 1½
Nominal diameter of inspection flange (RFL) DN 200 DN 200
Sensor/controller connections Sensor terminal strip
Thermometer connection M8 Thermometer option

Dimensions SSH-WS 750 SSH-WS 1000 Article number Description


CW [mm] 157 180 13100750 Solar Storage Unit 750 l with flexible foam insul.
RF1 [mm] 280 320 13101000 Solar Storage Unit 1000 l with flexible foam insul.
FF1 [mm] 967 947
RF2 [mm] 1127 1097
Z [mm] 1227 1197
FF2 [mm] 1567 1482
HW [mm] 1855 1760
* Weight without insulation
El. heating [mm] 1032 1012 ** To achieve the rated output figure cited, the boiler output has to be greater than
the continuous operation specified.
Weight [kg] 344* 400* *** Only with water in the liquid state as the operating medium for the heat exchangers

Subject to setting and printing errors. 41


Storage Units, Buffers & Accessories S O L A R T E C H N I K

High-grade Steel Storage Unit – Solar HSS

Product description:
◆ For use for district heating, solar boilers, heating boilers and condensing
appliance technology; with internally positioned bare-tube heat exchanger
◆ Corrosion-resistant in use with drinking water
With sensor terminal strip for all common sensors
◆ Made in accordance with DIN 4753; flexible foam insulation 100 mm RAL 9006
◆ Operating pressures allowed: drinking water = 10 bar/heating water = 25 bar;
Permissible operating temperature: drinking water = 95° C/heating water = 110°C
◆ Made of 1.4571 high-grade steel

Storage unit model HSS 200 HSS 300 HSS 400 HSS 500 HSS 750 HSS 1000
Volume [litres] 200 300 400 500 750 1000
Diameter without insulation [mm] 500 500 600 600 750 850
Diameter with insulation [mm] 700 700 800 800 950 1050
Insulation [mm] 100 100 100 100 100 100
Height with insulation [mm] 1410 1660 1690 1960 2040 2120
Tilting height [mm] 1380 1625 1670 1920 2015 2070
Heating surface, top/bottom [m2] 0,9/0,9 0,9/1,4 0,9/1,8 0,9/1,8 1,4/2,4 1,6/2,8
Water volume, HX, top/bottom [litres] 3,0/3,0 4,7/7,3 6,2/12,5 6,2/12,5 9,7/16,6 11,1/19,5
Volume flow, HX, top/bottom [m³/h] 0,8/1,65 1,3/2,58 1,4/2,95 1,6/3,26 2,06/4,01 2,3/4,8
Pressure loss, HX, top/bottom [mbar] 160/580 40/190 15/90 15/105 35/200 50/320
Rated output figure* top/bottom as per DIN 4708 2/4 3/12 3/20 4/23 10/35 14/46
Continuous operation, top/bottom
As per DIN 4708 (10/80/45) °C [l/h] 476/978 784/1522 820/1743 943/1924 1215/2413 1348/2846
max. T/max. P TW [°C/bar] 95/10 95/10 95/10 95/10 95/10 95/10
max. T/max. P heating [°C/bar] 110/25 110/25 110/25 110/25 110/25 110/25

Rp ¾ Rp ¾ Rp ¾ Rp ¾ Rp ¾ Rp ¾
Cold/hot water, (CW/WW) [inches] Rp 1 Rp 1 Rp 1 Rp 1 Rp 1½ Rp 1½
Circulation (circ.) [inches]
Heat exchangers, outside thread (FF/RF) [inches] G1 G 1¼ G 1½ G 1½ G 1½ G 1½
Electric heating Possible via inspection flange
Nominal diameter of inspection flange (RFL) DN 110

Rp ½
Sensor/controller connections Sensor terminal strip
Thermometer connection [inches]

Dimensions HSS 200 HSS 300 HSS 400 HSS 500 HSS 750 HSS 1000 Article number Description
CW [mm] 65 65 70 70 80 80 13200200 High-grade Steel Storage Unit 200 l, 50 mm, PU insul.
RF1 [mm] 305 305 330 330 380 395 13200300 High-grade Steel Storage Unit 300 l, 50 mm, PU insul.
FF1 [mm] 605 795 890 890 940 995 13200400 High-grade Steel Storage Unit 400 l, 50 mm, PU insul.
RF2 [mm] 685 870 975 975 1025 1185 13200500 High-grade Steel Storage Unit 500 l, 50 mm, PU insul.
Z [mm] 765 945 1055 1110 1115 1090 13200750 High-grade Steel Storage Unit 750 l, 100 mm, PU insul.
FF2 [mm] 1065 1260 1325 1380 1430 1585 13201000 High-grade Steel Storage Unit 1000 l, 100 mm, PU insul.
HW [mm] 1145 1375 1420 1670 1720 1710
Weight [kg] 75 100 115 120 185 210

* Um die angegebene NL–Zahl zu erreichen muss die Kesselleistung größer sein als die angegebene Dauerleistung.

42 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Storage Units, Buffers & Accessories S O L A R T E C H N I K

Utility Water Storage Unit BWS


Product description:
◆ Standard storage unit made of S235JR steel with a large-surface bare-tube heat
exchanger

◆ Protective magnesium anode 1 ¼" to complete the cathodic corrosion


◆ Inside: enamelling in accordance with Part 3 of DIN 4753; outside: primer-coated

protection in accordance with Part 6 of DIN 4753


◆ Sensor tube included

◆ NEW: A 1 ½" sleeve is provided as standard for retrofitting an electric


◆ Comes with thermometer (separate package)

heating system for all sizes


◆ Inspection opening 180 x 110 x hole diam. 150
◆ All outside thread, flat-sealing
◆ CFC-free 50-mm PU rigid-foam insulation with casing made of lined, coloured
plastic in accordance with Part 8 of DIN 4753, RAL colour silver 9006
◆ Pressure resistance 10 bar

Storage unit model BWS 200 BWS 300 BWS 400 BWS 500
Volume [litres] 200 300 400 500
Diameter without insulation [mm] 500* 500* 600* 650*
Diameter with insulation [mm] 600 600 700 750
Insulation [mm] [mm] 50* 50* 50* 50*
Height with insulation [mm] 1232 1697 1660 1783
Tilting height [mm] 1370 1800 1750 1970
Heating surface, top/bottom [m2] 0,9 1,2 1,5 1,8
Water volume, HX, top/bottom [Liter] 5,7 7,5 9,4 11,3
Volume flow, HX, top/bottom [m³/h] 1,2 1,6 2,0 2,4
Pressure loss, HX, top/bottom [mbar] 70 60 120 250
Rated output figure** top/bottom as per DIN 4708 3,6 8 11 14
Continuous operation, top/bottom
As per DIN 4708 (10/80/45) °C [l/h] 710 970 1180 1400
max. T/max. PTW [°C / bar] 95 / 10 95 / 10 95 / 10 95 / 10
max. T/max. P Heating*** [°C / bar] [°C / bar] 160 / 25 160 / 25 160 / 25 160 / 25

G¾ G¾ G¾ G¾
Cold/hot water, outside thread, (CW/HW) [inches] G1 G1 G1 G1

G¾ G¾ G¾ G¾
Circulation, outside thread (circ.) [inches]
Heat exchangers, all outside thread (FF/RF) [inches]
Electric heating, inside thread (E-heating) [inches] G 1½ G 1½ G 1½ G 1½
Nominal diameter of inspection flange (RFL) DN 110 DN 110 DN 110 DN 110
Sensor/controller connections (F1, F2) Sensor sleeve, internal diameter 9 mm
Thermometer connection M8 Thermometer option

Dimensions BWS 200 BWS 300 BWS 400 BWS 500 Article no. Description
CW [mm] 110 110 127 128 13210200 Utility Water Storage Unit 200 l with PU insulation
RF [mm] 180 180 205 205 13210300 Utility Water Storage Unit 300 l with PU insulation
FF [mm] 630 580 635 685 13210400 Utility Water Storage Unit 400 l with PU insulation
Z [mm] 780 1045 1065 1125 13210500 Utility Water Storage Unit 500 l with PU insulation
HW [mm] oben oben oben oben
El. heating [mm] 800 770 770 920
Weight [kg] 73 94 151 195
* Insulation not removable!
** To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified.
*** Only with water in the liquid state as the operating medium for the heat exchangers

Subject to setting and printing errors. 43


Storage Tanks, Buffers and Accessories S O L A R T E C H N I K

High-performance Storage Unit HLS

Product description:
◆ A standing storage unit made of S235JR steel with a large-surface
bare-tube heat exchanger
◆ Inside: enamelling in accordance with Part 3 of DIN 4753; outside:

◆ 1 ¼" protective magnesium anode to complete the cathodic corrosion


primer-coated

protection
◆ Temperature sensor, variably positionable by means of sensor terminal strip
◆ Inspection opening 180 x 110 x hole diam. 150
◆ All outside thread, flat-sealing
◆ CFC-free, 80-mm PU flexible-foam insulation with PVC top coat incl. floor
insulation in accordance with Part 8 of DIN 4753, RAL colour silver 9006
◆ Pressure resistance 10 bar

Speicher Typ HLS 300 HLS 400 HLS 500


Volume [litres] 300 400 500
Diameter without insulation [mm] 550 600 650
Diameter with insulation [mm] 710 760 810
Insulation [mm] 80 80 80
Height with insulation [mm] 1560 1790 1756
Tilting height [mm] 1550 1780 1760
Heating surface, top/bottom [m2] 3,2 4,2 4,6
Water volume, HX, top/bottom [Liter] 20,1 26,4 28,9
Volume flow, HX, top/bottom [m³/h] 3,6 3,8 4,0
Pressure loss, HX, top/bottom [mbar] 410 590 720
Rated output figure* top/bottom as per DIN 4708 19 27 35
As per DIN 4708 (10/80/45) °C [l/h] 2100 2250 2400
max. T/max. P TW [°C / bar] 95 / 10 95 / 10 95 / 10
max. T / max. P HZG** [°C / bar] 160 / 25 160 / 25 160 / 25

G ¾ IG G ¾ IG G ¾ IG
max. T/max. P heating [inches] G1 G1 G1
Circulation (Z) [inches]
Heat exchangers (FF/RF) [inches] Rp 1 IG Rp 1 IG Rp 1 IG
Electric heating Possible via inspection flange
Nominal diameter of inspection flange (RFL) DN 110
Sensor/controller connections Sensor terminal strip
Thermometer connection M8 Thermometer option

Dimensions HLS 300 HLS 400 HLS 500 Artikelnr. Beschreibung


CW [mm] 115 129 130 13510200 High-performance Storage Unit 200 l, 50 mm
RF [mm] 210 210 225 13510300 High-performance Storage Unit 300 l, 50 mm
FF [mm] 1270 1530 1470 13510400 High-performance Storage Unit 400 l, 50 mm
Z [mm] 1000 906 1200 13510500 High-performance Storage Unit 500 l, 50 mm
HW [mm] 1393 1611 1571
Weight [kg] 170 208 235

* To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified.
** Only with water in the liquid state as the operating medium for the heat exchangers

44 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Storage Units, Buffers & Accessories S O L A R T E C H N I K

Buffer Storage Unit without PSD set of tubing

Product description:
◆ Standing storage unit made of S235JR steel
◆ Inside untreated, outside with primer coat
◆ Temperature sensor, variably positionable by means of sensor
terminal strip
◆ Optional flange 280 x 200 x hole diameter 245 for inspection
or upgrading
With finned pipe heat exchanger (PSX-F) - for extra charge,
see accessories
◆ CFC-free, 80-mm PU flexible-foam insulation with PVC top coat
incl. floor insulation in accordance with Part 8 of DIN 4753,
from 800 litres with 100-mm thickness, RAL colour silver 800
◆ Pressure resistance 3 bar

Storage Unit Model PSX / PSX-F 500 800 1000 1500 2000 3000
Volume [litres] 500 800 1000 1500 2000 3000
Diameter without insulation [mm] 650 790 790 1000 1100 1150
Diameter with insulation [mm] 810 990 990 1200 1300 1350
Insulation [mm] 50 100 100 100 100 100
Height with insulation [mm] 1700 1802 2202 2130 2410 3160
Tilting height [mm] 1710 1780 2180 2150 2450 3170
max. T / max. P heating [°C / bar] 95 / 3
Loading/unloading connections (A1-A4) [inches] Rp 1½
Electric heating: only PSX-F Sensor terminal strip
Nominal diameter of inspection flange (RFL): only PSX-F DN 200
Sensor/controller connections Sensor terminal strip
Thermometer connection M8 Thermometer option
Air bleed [inches] Rp 1¼

Dimensions 500 800 1000 1500 2000 3000


A1 [mm] 245 246 246 320 365 375
RFL [mm] 350 351 351 425 470 480
A2 [mm] 645 646 786 786 905 1475
A3 [mm] 1045 1046 1326 1253 1445 2265
A4 [mm] 1405 1446 1866 1720 1985 3055
Weight [kg] 95 143* 150* 211* 270* 348*

Article number Description


13400500 Buffer Storage Unit, 500 l with insulation
13400800 Buffer Storage Unit, 800 l with insulation
13401000 Buffer Storage Unit, 1000 l with insulation
13401500 Buffer Storage Unit, 1500 l with insulation
13402000 Buffer Storage Unit, 2000 l with insulation
13403000 Buffer Storage Unit, 3000 l with insulation
* Weight without insulation

Subject to setting and printing errors. 45


Storage Tanks, Buffers and Accessories S O L A R T E C H N I K

Combination/Buffer Storage Unit KSW-D

Product description:
◆ The Combination/Buffer Storage Unit is equipped with an integrated high-grade steel tube heat exchanger
without circulation****
◆ It is used chiefly in solar collector systems and heating systems.
◆ A buffer storage unit made of high-quality steel S235JR; inside: untreated; outside: primer-coated
◆ Pressure resistance of buffer storage unit: 3 bar
◆ Two large-surface bare-tube heat exchangers
◆ CFC-free flexible foam insulation with PVC top coat, RAL colour silver 9006

◆ From 800 l, 1 ½" sleeve shifted by 30° for optional el. heating (RCN 65 - 4 kW ) at height of connection piece A5
◆ Temperature sensor, variably positionable by means of sensor terminal strip

◆ All outside thread, flat-sealing

Combination/Buffer Storage Unit KSW 450 650 800 900 1050 1300
Volume of Buffer Storage Unit [litres] 450 650 800 900 1050 1300
Diameter without insulation [mm] 600 700 790 790 900 900
Diameter with insulation [mm] 800 900 990 990 1100 1100
Insulation [mm] 100
Height [mm] 1960 1970 2020 2190 2000 2430
Tilting height [mm] 2000 2005 2060 2230 2050 2470
Heating surface, HX corrugated tube KSW [m2] 5
Water volume, HX corrugated tube KSW [litres] 27
Rated output figure* as per DIN 4708 KSW 1,7 2,2 2,5 2,9 3,4 3,6
10-min. peak tapping quantity KSW
With temperature of standby volume temp.** 52° C [litres] 105 125 154 160 175 200
10-min. peak tapping quantity KSW
With temperature of standby volume temp.** 65° C [litres] 145 170 210 230 270 340
10-min. peak tapping quantity KSW
With storage unit temp.*** 65° C [litres] 182 250 324 364 390 420
max. T / max. P HW heating [°C / bar] 110 / 16
max. T / max. P Buffer Storage Unit [°C / bar] 95 / 3

G¾ G¾ G¾ G¾ G¾ G¾
max. ∆ p storage unit/hot water corrugated tube [bar] 6
Cold/hot water, outside thread [inches]
Heat exchanger (FF/RF) all outside thread [inches] G1 G1 G1 G1 G1 G1
Loading/unloading connections (A2-A5) outside thread [inches] G1 G1 G1 G1 G1 G1
Loading/unloading connections (A1+A6) outside thread [inches] G 1¼ G 1¼ G 1¼ G 1¼ G 1¼ G 1¼
Electric heating (E-HTG) inside thread [inches] – – Rp 1½ Rp 1½ Rp 1½ Rp 1½
Sensor/controller connection Sensor terminal strip

* To achieve the rated output figure cited, the boiler output has to
** Standby volume between connections A5 und A6; continuous operation operation
***Standby volume between connections A1 und A6; continuous operation
**** With KSW circulation is possible via T-piece in the CW inlet.

46 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Storage Units, Buffers & Accessories S O L A R T E C H N I K

Combination/Buffer Storage Unit KSW-D

Combination/Buffer Storage Unit KSW 450 650 800 900 1050 1300
Dimensions
A1 [mm] 105 110 125 125 110 110
RL1 (only Models 1 & 2) [mm] 195 200 225 225 210 210
A2 [mm] 495 500 540 570 525 600
VL1 (only Models 1 & 2) [mm] 595 600 645 685 630 730
RL2 (only Model 2) [mm] 695 700 745 785 730 830
A3 [mm] 795 800 850 900 835 960
A4 [mm] 995 1000 1060 1130 1045 1220
VL2 (only Model 2) [mm] 1095 1100 1165 1245 1150 1350
A5 [mm] 1195 1200 1265 1360 1250 1470
ELECTRIC HEATING [mm] – – 1265 1360 1250 1470
A6 [mm] 1715 1720 1745 1930 1730 2150
Weight, KSW [kg] 193 218 268 283 316 348

Article number Description


13510450 Combination Storage Unit, 450 l with utility water heat exchanger
13510650 Combination Storage Unit, 650 l with utility water heat exchanger
13510800 Combination Storage Unit, 800 l with utility water heat exchanger
13510900 Combination Storage Unit, 900 l with utility water heat exchanger
13511050 Combination Storage Unit, 1050 l with utility water heat exchanger
13511300 Combination Storage Unit, 1300 l with utility water heat exchanger

Subject to setting and printing errors. 47


Storage Tanks, Buffers and Accessories S O L A R T E C H N I K

Combination/Buffer Storage Unit KSE-D

Product description:
◆ This storage unit with an integrated utility water storage unit can be used as a combination storage unit.
◆ An integrated utility water storage unit 200 litres in volume is with enamelling in accordance with Part 3 of DIN 4753,
with Mg protective anode.
◆ It is used predominantly in solar collector systems and heating systems.
◆ A buffer storage unit made of high-quality steel S235JR; inside: untreated; outside: primer-coated
◆ Pressure resistance of buffer storage unit of 3 bar/utility water storage unit 10 bar
◆ Two large-surface bare-tube heat exchangers
◆ CFC-free flexible foam insulation with PVC top coat, RAL colour silver 9006
◆ Temperature sensor, variably positionable by means of sensor terminal strip

◆ From 800 l, 1 ½" sleeve shifted by 30° for optional el. heating (RCN 65 - 4 kW )at height of connection piece A5
◆ The utility water storage unit is equipped with a circulation connection and a cleaning flange as standard.

◆ All outside thread, flat-sealing

The KSE Combination Storage Unit 250/200 450/200 600/200 700/200 850/200 1100/200
Volume of Combination Storage Unit (HTG/HW) [litres] 250/200 450/200 600/200 700/200 850/200 1100/200
Diameter without insulation [mm] 600 700 790 790 900 900
Diameter with insulation [mm] 800 900 990 990 1100 1100
Insulation [mm] 100
Height [mm] 1960 1970 2020 2190 2000 2430
Tilting height [mm] 2000 2005 2060 2230 2050 2470
Heating surface, top/bottom [m2] 1,6 2 2,4 2,6 2,9 3,3
Water volume, HX, top/bottom [Liter] 9,6 12 14,5 15,7 17,5 20
Rated output figure* as per DIN 4708, KSE 1,3 1,8 2,1 2,5 3 3,2
max. T/max. PTW (KSE) [°C / bar] 95 / 10
max. T / max. P HW heating [°C / bar] 110 / 16

G¾ G¾ G¾ G¾ G¾ G¾
max. T / max. P Buffer Storage Unit [°C / bar] 95 / 3

G¾ G¾ G¾ G¾ G¾ G¾
Cold/hot water, outside thread [inches]
Circulation (Circ.) outside thread [inches]
Heat exchanger (FF/RF) all outside thread [inches] G1 G1 G1 G1 G1 G1
Loading/unloading connections (A2-A5) outside thread [inches] G1 G1 G1 G1 G1 G1
Loading/unloading connections (A1+A6) outside thread [inches] G 1¼ G 1¼ G 1¼ G 1¼ G 1¼ G 1¼
Electric heating (el. heating) inside thread [inches] – – Rp 1½ Rp 1½ Rp 1½ Rp 1½
Sensor/controller connections Sensor terminal strip

* To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified.
** Standby volume between connections A5 und A6; continuous operation [l/h] = 10 min. peak tapping quantity x 6 at boiler output > continuous operation
*** Standby volume between connections A1 und A6; continuous operation [l/h] = 10 min. peak tapping quantity x 6 at boiler output > continuous operation

48 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Storage Tanks, Buffers and Accessories S O L A R T E C H N I K

Combination/Buffer Storage Unit KSE-D

The KSE Combination Storage Unit 250/200 450/200 600/200 700/200 850/200 1100/200
Dimensions
A1 [mm] 105 110 125 125 110 110
RL1 (only Models 1 & 2) [mm] 195 200 225 225 210 210
A2 [mm] 495 500 540 570 525 600
VL1 (only Models 1 & 2) [mm] 595 600 645 685 630 730
RL2 (only Model 2) [mm] 695 700 745 785 730 830
A3 [mm] 795 800 850 900 835 960
A4 [mm] 995 1000 1060 1130 1045 1220
VL2 (only Model 2) [mm] 1095 1100 1165 1245 1150 1350
A5 [mm] 1195 1200 1265 1360 1250 1470
ELECTRIC HEATING [mm] – – 1265 1360 1250 1470
A6 [mm] 1715 1720 1745 1930 1730 2150
Weight of KSE [kg] 244 269 319 334 367 399

Article number Article number


13500450 Combination Storage Unit, 450 l with 200-l utility water storage unit
13500650 Combination Storage Unit, 650 l with 200-l utility water storage unit
13500800 Combination Storage Unit, 800 l with 200-l utility water storage unit
13500900 Combination Storage Unit, 900 l with 200-l utility water storage unit
13501050 Combination Storage Unit, 1050 l with 200-l utility water storage unit
13501300 Combination Storage Unit, 1300 l with 200-l utility water storage unit

Subject to setting and printing errors. 49


Storage Units, Buffers & Accessories S O L A R T E C H N I K

Buffer Storage Unit with set of tubing PSD-R

Product description:
◆ A standing storage unit made of S235JR steel with a large-surface
bare-tube heat exchanger
◆ Inside untreated, outside with primer coat
◆ Temperature sensor, variably positionable by means of sensor
terminal strip
◆ CFC-free, 80-mm PU flexible-foam insulation with PVC top coat
incl. floor insulation in accordance with Part 8 of DIN 4753,
RAL colour silver 800 thickness, RAL colour silver 9006
◆ Pressure resistance 3 bar

Storage unit model PSD-R 500 PSD-R 800 PSD-R 1000 PSD-R 1500 PSD-R 2000
Table of Contents [litres] 500 800 1000 1500 2000
Diameter without insulation [mm] 650 790 790 1000 1100
Diameter with insulation [mm] 810 990 990 1200 1300
Insulation [mm] 80 100 100 100 100
Height with insulation [mm] 1700 1802 2202 2130 2410
Tilting height [mm] 1710 1780 2180 2150 2450
Heating surface [m2] 2,5 2,5 3,2 4,25 4,25
Water volume, HX [Liter] 15,7 15,7 20,1 26,7 26,7
max. T / max. P storage unit [°C / bar] 95 / 3 95 / 3 95 / 3 95 / 3 95 / 3
max. T / max. P GWT [°C / bar] 110 / 16 110 / 16 110 / 16 110 / 16 110 / 16
Heat exchanger outside thread (FF/RF) [inches] G1 G1 G1 G1 G1
Loading/unloading connections (A1-A4) [inches] Rp 1½ Rp 1½ Rp 1½ Rp 1½ Rp 1½
Electric heating This is not possible.
Inspection flange (RFL) –
Sensor/controller connections Sensor terminal strip
Thermometer connection –
Air bleed [inches] Rp 1¼ Rp 1¼ Rp 1¼ Rp 1¼ Rp 1¼

Dimensions PSD-R 500 PSD-R 800 PSD-R 1000 PSD-R 1500 PSD-R 2000
A1, RF [mm] 245 246 246 320 365
A2 [mm] 645 646 786 786 905
FF [mm] 870 816 946 1020 1065
A3 [mm] 1045 1046 1326 1253 1445
A4 [mm] 1405 1446 1866 1720 1985
Weight (without insulation) [kg] 120 183 202 281 350

Article number Article number Description


13700500 Buffer Storage Unit, 500 l with insulation & set of tubing
13700800 Buffer Storage Unit, 800 l with insulation & set of tubing
13701000 Buffer Storage Unit, 1000 l with insulation & set of tubing
13701500 Buffer Storage Unit, 1500 l with insulation & set of tubing
13702000 Buffer Storage Unit, 2000 l with insulation & set of tubing

50 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Storage Units and Heat Exchangers S O L A R T E C H N I K

Accessories List for Storage Units

Built-in electric heating systems for vitreous enamelled storage units


◆ Built-in electric heating systems designed with insulation especially for use in vitreously
enamelled solar and utility-water storage units as supplementary or emergency heating,
for horizontal installation.
◆ Simple installation provided by 1½" threaded head with outside thread.
◆ Temperature is preselected by a thermostat with a setting range of 30°-75° C.
◆ Temperature-limiting safety switch 95° C
◆ Comes with operating instructions and circuit diagram.
◆ For installation in a blind flange, be sure to also order a blind flange with sleeve in sizes that fit.
◆ Casing: plastic

Note: The electric connection may only be made by authorised and qualified personnel in accordance
with VDE regulations and ordinances by the PUCs (public utility companies).
This must also be complied with in cases of malfunctions and repairs.
Combinations with CrNi boilers are not advisable.

Output [kW] Voltage [V] Depth [mm]


3,0 230/400 (390)375

Article number Description


13000504 Electric Heating Element EHP30 3000W/230V/375 mm

Output [kW] Voltage [V] Depth [mm]


3,0 400 390
3,75 400 550
4,5 400 500
6,0 400 550

Article number Description


13000502 Electric Heating Element EHP30 3000 W / 400 V / 390 mm
13000510 Electric Heating Element EHP37 3750 W / 400 V / 320 mm
13000503 Electric Heating Element EHP45 4500 W / 400 V / 500 mm
13000501 Electric Heating Element EHP60 6000 W / 400 V / 550 mm

Built-in electric heating systems for combination storage units


(From volume of 800 l in total volume)
◆ 1½“ outside thread, controller 30°-80° C, STP fixed 110° C

Output [kW] Voltage [V] Installation depth [mm]


4,0 400 275
4,0 230 275

Article number Description


13000508 Electric Heating System for Combination Storage Unit 4000 W/400 V/275 mm
13000509 Electric Heating System for Combination Storage Unit 4000 W/230 V/275 mm

Subject to setting and printing errors. 51


S O L A R T E C H N I K

Gelötete
Soldered
Plattenwärmetauscher
Plate-type Heat Exchangers

52 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Plate-type Heat Exchangers S O L A R T E C H N I K

◆ Maintenance-free
◆ A pressure- and temperature-resistant, lightweight heat exchanger
◆ Short response times for temperature changes (on account of small volumes)
◆ Minimum soiling factor due to optimised embossed pattern for the plate
◆ Self-cleaning
◆ Optimised design for every application
◆ Low space requirement/kW-output
◆ 100% exploitation of materials

Model Output [kW] Collector area m2 Pressure loss kPa


B25T*10 – 7,2 bis 12 5/5
B25T*20 – 7,8 – 19,8 13 – 33 10/8
B25T*30 – 20,4 – 34,2 34 – 57 13/10
B25T*40 – 34,8 – 49,2 58 – 82 15/12

Article number Description


19000012 Plate-type Heat Exchanger B25* 10 with insulation
19000013 Plate-type Heat Exchanger B25* 20 with insulation
19000014 Plate-type Heat Exchanger B25* 30 with insulation
19000015 Plate-type Heat Exchanger B25* 40 with insulation
19000016 Plate-type Heat Exchanger B25* 50 with insulation

Note:
You get the best efficiency through our customised design (calculation)
of the heat exchanger FREE OF CHARGE.

Subject to setting and printing errors. 53


Tubing and insulating systems S O L A R T E C H N I K

Flexible Solar Tubing Systems

Product description:

GEO-TEC Thermoflex Solar Tubing Systems consist of two


tubes glued to one another, and insulated high-grade
steel corrugated tubes.
The insulation and sheathing are high-temperature-
resistant and available in customised lengths.
Simple separation of the twin tubes without damaging the
protective foil or the insulation enable problem-free tu-
bing of the solar collector system.
The Easy Drill Screw-Connection Kit allows very simple
screwed connections of the high-grade steel corrugated
tube to the lines and fittings.
The GEO-TEC Thermoflex tubing systems are provided The tubes are rolled in bundles, EWK to DN 20 in 800 x 800
with a black, tear-resistant outer sheathing. cardboard box, EWK DN 25 shrink-wrapped on pallets.
Available in lengths of: 10 m, 15 m, 20 m or 25 m. Cus- Comes with: As standard, four Screw Connection Kits with
tomised lengths are possible up to 100 m, and will be sup- outside thread and one oval clamp fastening set comes
plied on request. packed with each EWK bundle.

Thermoflex EWK double Table with dimensions:


DN L x B cm
◆ Highly flexible high-grade steel corrugated tube DN 16 122 x 60
◆ With integrated sensor cable DN 20 134 x 66
◆ With high-temperature India rubber to +150° C, and for DN 25 148 x 73
◆ Bending radii: DN 16 and DN 20 = 0.15 m, DN 25 =
◆ Insulation thickness: 13 mm
◆ Available on request: Insulation thickness: 19 mm

Article number Description


DN16:
12001001 High-grade steel corrugated tube/rubber-insulated, 2xDN16-13 mm, by the metre
12001002 High-grade steel corrugated tube/rubber-insulated, 2xDN16-13 mm, 10-m bundle
12001003 High-grade steel corrugated tube/rubber-insulated, 2xDN16-13 mm, 25-m bundle

DN20:
12002000 High-grade steel corrugated tube/rubber-insulated, 2xDN20-13 mm, by the metre
12002002 High-grade steel corrugated tube/rubber-insulated, 2xDN20-13 mm, 10-m bundle
12002003 High-grade steel corrugated tube/rubber-insulated, 2xDN20-13 mm, 25-m bundle

DN25:
12002001 High-grade steel corrugated tube/rubber-insulated, 2xDN25-13 mm, by the metre
12002004 High-grade steel corrugated tube/rubber-insulated, 2xDN25-13 mm, 10-m bundle
12002005 High-grade steel corrugated tube/rubber-insulated, 2xDN25-13 mm, 25-m bundle

54 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Tubing and insulating systems S O L A R T E C H N I K

Flexible Solar Tubing Systems

Thermoflex EW
◆ High-grade steel corrugated tube with low corrugation height
◆ Resistant to rust, acid, heat and vibration
◆ Very good flexibility and compression strength
◆ Simple design with detachable screwed connections
◆ Available in bundles up to 100 m
◆ Short lengths are promptly available from warehouse.
Article nu. Description Dimension (inches) Lengths
12000002 High-grade steel corrugated tube, DN 16 by the metre 1/2 By the metre
12000003 High-grade steel corrugated tube, DN 16 25 m, bundle 1/2 25
12000004 High-grade steel corrugated tube, DN 16 50 m, bundle 1/2 50
12000005 High-grade steel corrugated tube, DN 16 100 m, bundle 1/2 100

12200001 High-grade steel corrugated tube, DN 20 by the metre 3/4 Meterware


122000011 High-grade steel corrugated tube, DN 20 25 m, bundle 1/2 25
122000012 High-grade steel corrugated tube, DN 20 50 m, bundle 1/2 50
122000013 High-grade steel corrugated tube, DN 20 100 m, bundle 1/2 100

12200002 High-grade steel corrugated tube, DN 25 by the metre 1 Meterware


122000014 High-grade steel corrugated tube, DN 25 25 m, bundle 1/2 25
122000015 High-grade steel corrugated tube, DN 25 50 m, bundle 1/2 50
122000016 High-grade steel corrugated tube, DN 25 100 m, bundle 1/2 100

Easy Drill Screw-Connection Kit


Available as Screw-Connection Kit with outside thread,
with solder end or as a coupling set
Consists of:
◆ 1 coupling nut
◆ 1 spacer ring
◆ 1 Easy Drill washer
◆ 1 special-purpose seal
◆ 1 screw-in part with broad sealing surface

Article number Description Coupling nut (inches) Outer thread red.


11000116 Screw-Connection Kit with outer thread DN 16 3/4 1/2 Zoll
11000120 Screw-Connection Kit with outer thread DN 20 1 3/4 Zoll
11000013 Screw-Connection Kit with outer thread DN 25 1 1/4 1 Zoll

11000024 Screw-Connection Kit with solder-end DN 16 3/4 18 mm


11000025 Screw-Connection Kit with solder-end DN 20 1 22 mm
11000026 Screw-Connection Kit with solder-end DN 25 1 1/4 28 mm

11016012 Screw-Connection Kit, Coupling Set DN 16 3/4 3/4 Zoll


11020034 Screw-Connection Kit, Coupling Set DN 20 1 1 Zoll
11000030 Screw-Connection Kit, Coupling Set DN 25 1 1/4 1 1/4 Zoll

Subject to setting and printing errors. 55


Tubing and insulating systems S O L A R T E C H N I K

Flexible Solar Tubing Systems

Protective hose for outdoor areas


◆ UV-resistant, weather- and raptor-proof
◆ Thickness: 1.5 mm
◆ Black
◆ Form of delivery: rolled in 10-m bundles
◆ Slit on one side for easy installation
◆ Maximum service temperature 135° C
◆ Elongation at tear 400 - 600%

Article number Description


13300121 Protective hose for outdoor areas, universally split

Thermoflex EW for Underground Installation


◆ Two highly flexible high-grade steel corrugated tubes
◆ For house connections, distribution lines & connecting lines
◆ Insulation: rock wool , 0.037 W/mK, temperature-resistant to 250°C
◆ Sheathing tube: flexible corrugated PE-HD sheathing tube
◆ Integrated sensor cable, 4 x 0.5 mm²
◆ Fixed lengths according to reques

Article number Description


11000216 High-grade steel corrugated tube for underground installation, DN 16
11000220 High-grade steel corrugated tube for underground installation, DN 20
11001225 High-grade steel corrugated tube for underground installation, DN 25

Plastic Cap for Thermoflex EW


◆ Sturdy plastic cap for a twin tubes with a hole lead-through for
the sensor cable drawn in.
◆ Colour: white
◆ For both indoor and outdoor use.

Article number Description


11000234 End Cap AUSTROFLEX EW SOLAR A 160 DN 2x16
11000233 End Cap AUSTROFLEX EW SOLAR A 160 DN 2x20
11000231 End Cap AUSTROFLEX EW SOLAR A 160 DN 2x25

56 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
S O L A R T E C H N I K

Subject to setting and printing errors. 57


Stoves S O L A R T E C H N I K

Chopped Wood Stoves

The GEO-TEC B 16-11 Stove is used in detached houses, properties of


a similar size and as a single housing-unit stove.
It impresses people with its timeless design and is also an eye-catcher.
The visible flames it provides for in a sitting room convey a special room
atmosphere.
The GEO-TEC B 16-11 Stove has total output of 16kW, which is distributed
to 11 kW in the water-bearing components and 5 kW on the air side.

Solar collectors
Solare
Solar heating
Heizungsunter-
support
stützung
Hot water

heating system
RoomRaumheizung

Kaltwasser
Cold water

Bio 16-11

Stove door With movable panel that prevents smoke


from escaping while wood is being added.
Combustion chamber Lined all around with special, chemically
bonded fireclay bricks
Casing Solid, welded boilerplate
Thickness: 3-5 mm
Ash container Volume: 13.5 litres
Fire box Volume: 80 litres
Fuel Wood to 20% moisture or wood briquettes
Total rated output 16 kW
Heating water output 11 kW
Air space output 5 kW
Exhaust gas temperature at rated output Approx 250° C
Water volume of the heat exchanger 7.5 litres
Max. operating pressure 3 bar
Fuel consumption at rated output 4.9 kg/h
Minimum chimney draught 15 Pa.
Minimum chimney size 250 cm
Weight 220 kg
Height/Width/Depth 1030/570/510 mm

Article number Description


700100 Woodburning Stove B 16/11
700101 Regumat RTA

58 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Stoves S O L A R T E C H N I K

Pellet Stove Saturn S7

The Saturn S7 impresses people with its optimum combination of a pellet boiler and a pellet stove.
High-quality materials and very modern technology guarantee high performance and lasting reliability.
Professional commissioning must be carried out to use the stove in optimum fashion.
Only a valid commissioning certificate guarantees warranty claims.

Total heat output, max. 7.5 kW / 6450 kcal/h


Total heat output, min. 2.1 kW / 1806 kcal/h
Output at max. 84.2% (>80%)
Output at min. 82.7% (>80%)
Flue gas outlet temperature at max. 170° C
Flue gas outlet temperature at min. 120° C
CO 13% O2 at min. and at max. 0.056 - 0.026 %
CO2 at min. and at max. 3.7 % - 5,6 %
Exhaust gas mass at min. and at max. 4.2 - 9.5 g/sec
Minimum exhaust at max. output 0.12 mbar – 12 Pa
Minimum exhaust at min. output 0.10 mbar – 10 Pa
Capacity of the pellet container 52 l
Pellet type Pellets with 6-8 mm Ø, pellet size 5/30 mm
Pellet consumption per hour Min. -0.6 kg/h* max.- kg/h* -1.7 kg/h*
Autonomy of operation At min. - 28 h* at max. 10 h*
Room heating capacity m3 160/40 – 185/25 – 215/30**
Admission of combustion air Outer diameter 50 mm
Flue gas outlet Outer diameter 80 mm
Maximum current consumption 270 watt
Mains voltage and frequency 220 volts/50 Hz
Net weight 112 kg
Gross weight 122 kg Black
* These values may fluctuate depending on type and size of the pellets used.
** Room heating capacity depending on requirement Kal/m3

Silver Bordeauxred

Article number Description


700300 Pellet Stove SATURN, Black
700301 Pellet Stove SATURN, Bordeaux red
700302 Pellet Stove SATURN, Silver

Subject to setting and printing errors. 59


Stoves S O L A R T E C H N I K

Pellet Stoves, Hydro N21-18

The GEO-TEC N 21-18 impresses people with its optimum combination of a pellet boiler and a pellet stove.
High-quality materials and very modern technology guarantee high performance and lasting reliability.
An integrated water jacket makes it possible to also operate a heating system with the N 21-18.
The heating output can be regulated from 5.4 to 21.5 kW, with efficiency of over 90%.

Total heat output, max. 21.5 kW (18.490 kcal) / 16.2 kW (13.932 kcal)***
Total heat output, min. 6.2 kW (5.332 kcal) / 3.7 kW (3.182 kcal/h)***
Output: at max. 92 % (> 90%)
Output: at min. 93 % (> 90%)
Flue gas outlet temperature at max. 250° C
Flue gas outlet temperature at min. 100° C
CO 13% O2 at min. and at max. 0.055 - 0.018%
CO2 at min. and at max. 5.5% - 11.9%
Exhaust gas mass at min. and at max. 7.3 - 13 g/sec
Minimum exhaust at max. output 0.12 mbar - 12 Pa
Minimum exhaust at min. output 0.10 mbar - 10 Pa
Capacity of the pellet container 52 l
Pellet type Pellets with 6 mm Ø pellet size 5/30 mm
Pellet consumption per hour Min.-1 kg/h* max.-4 kg/h*
Autonomy of operation At min.-33 h* at max. 9 h*
Room heating capacity m3 185/40 - 215/35 - 250/30**
Admission of combustion air Ø 50 mm
Flue gas outlet Ø 80 mm
Maximum current consumption 270 watt
Mains voltage and frequency 220 volts / 50 Hz
Net weight 125 kg
Gross weight 135 kg Bordeauxred
* These values may fluctuate depending on type and size of the pellets used.
** In Italy only pellets with a diameter of 6 mm may be used.
*** Calorific values of 5180 Kcal/kg

Desert Black Salt & Pepper

Article number Description


700200 Pellet Stove HYDRO, Bordeaux red
700201 Pellet Stove HYDRO, Black
700202 Pellet Stove HYDRO, Desert
700203 Pellet Stove HYDRO, Salt & Pepper

60 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Stoves S O L A R T E C H N I K

Solar Active GEA Pellet Stoves

The Pellet Stove SOLAR ACTIVE is the optimum modern-age stove with ACTIVE
system for automatic air adjustment system, depending on the pellet type.
Key data: Weight: 120 kg, fire tube connection: diameter 80 mm

Silver Bordeauxred Black

Total heat output, max. 8,7 kw / 7482 kcal/h


Total heat output, min. 2,6 kw / 21,50 kcal/h
Output at max. 87,9 % (> 85%)
Output at min. 90,7 % (> 85%)
Flue gas outlet temperature at max. 92°C
Flue gas outlet temperature at min. 168°C
CO 13% O2 at min. and at max. 0.042 – 0.017 %
CO2 at min. and at max. 4,5 % – 8 %
Exhaust gas mass at min. and at max. 4 – 7,7 g/sec
Minimum exhaust at max. output 0,12 mbar – 12 Pa
Minimum exhaust at min. output 0,10 mbar – 10 Pa
Capacity of the pellet container 28 litres
Pellet type Pellets with 6 mm ø pellet size 5/30 mm
Pellet consumption per hour Min. - 0,6 kg/h* max. - 2 kg/h*
Autonomy of operation At min.-28h h* At max. 9 h*
Room heating capacity m3 187/40 – 214/35 – 250/30** Remote control with
Admission of combustion air Outer diameter 50 mm integrated thermostat
Flue gas outlet Outer diameter 80 mm
Maximum current consumption 270 watt
Mains voltage and frequency 220 volts/50 Hz
* These values may fluctuate depending
Net weight 120 kg on type and size of the
** Room heating capacity depending on
Gross weight 140 kg requirement Kal/m3

Article number Description


700500 Pellet Stove Solar ACTIVE GEA Black
700501 Pellet Stove Solar ACTIVE GEA Bordeaux red
700502 Pellet Stove Solar ACTIVE GEA Silver

Subject to setting and printing errors. 61


Trade Fair and Promotional Items S O L A R T E C H N I K

Aluminium and High-grade Steel Collectors

PVC Kit with mini-collector/fastening materials


PVC kit with:
◆ 1 Mini-collector 210 x 310 mm
◆ High-grade steel or aluminium model
or
◆ Installation materials

Article number Description


11000500 Mini-collector, aluminium
11000600 Mini-collector high-grade steel
11000700 Installation materials

Collector Cross-Section Model for Trade Fairs


The internal workings of the collector are visible in part.
This collector is only a display piece and thus not operational.

Titanium absorbers

Article number Description


77002003 Cross-section model, aluminium
500900 Cross-section model, high-grade steel

62 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Solar Set S O L A R T E C H N I K

We will put your Solar Set together for utility water heating support and/or heating
support, doing so according to your particular requests.

Subject to setting and printing errors. 63


General Terms of Business S O L A R T E C H N I K
of GEO-TEC Solartechnik GmbH, Villacherstraße 95, A-9800 Spittal/Drau

Our Terms and Conditions of Business below apply to all price quotes, contract subject to the provision in Para. 3. The Client shall only be
contracts, deliveries and other performance. entitled to claims for compensation in cases of damages due to
Any conditions by a Client differing from these, also including mere ad- delay or non-performance if the delivery has been delayed due to
ditional conditions, which we have not expressly approved in writing, gross fault on the part of the contractor, a properly constituted
shall be excluded, even if we have not expressly opposed such in the agent or one of our managing salaried employees.
individual case. 3. Any unforeseen circumstances, for which we are not responsible,
such as force majeure, war, uprisings, lock-ins or lock-outs, strikes
and lock-outs, difficulties procuring materials, operational inter-
1. Price quotes and acceptance of orders ruptions, energy shortages, lack of means of transport and similar
Our price quotations are subject to confirmation. Orders as well as any circumstances (also if such occur at front-end suppliers’) shall ex-
changes to orders placed with us shall be binding for the Buyer in all tend the delivery period commensurately, this being by at least the
cases, irrespective of whether they are direct or via our sales repre- duration of the hindrance if such hinders us from meeting our com-
sentatives in the field. Orders and changes placed with us shall only mitments on time. If it is foreseeable that a delay in delivery will
become binding on our written confirmation of the order. last longer than two months, then both parties shall be entitled to
withdraw. Buyers may not derive any claims for damages from an ex-
tension of the time period for delivery, even in cases of withdrawal.
2. Prices We shall also not be responsible for the aforementioned circum-
stances if they develop during a delay already existing. In important
All prices are ex works and, unless something else is agreed, are in
cases, we will notify ordering parties as soon as possible about the
without turnover tax (VAT), which shall be charged at the respective
start and end of such hindrances.
valid rate. All prices are current prices. For orders without an express
price agreement, the prices for the day of delivery shall apply. We are
entitled to make appropriate price increases if, after quoting a price,
5. Payment
changes occur in the prices of raw materials or supplies, wages,
salaries, freight or other public charges. Cash discounts, discounts and 1. Unless otherwise agreed, our invoices are due and payable strictly
time allowed for payment shall require special agreement. net within 14 days as of the invoice date without any deductions.
Before old invoices already due and payable from earlier deliveries
are paid, no deductions will be granted on new invoices.
3. Delivery, passing of risk, shipping & packaging 2. Bills of exchange will only be accepted with a relevant agreement
Deliveries are carried out ex our warehouse. Unless otherwise agreed and even then (as also with cheques) only on account of perform-
in writing, shipping is carried out chargeable to and at the risk of the ance. Discount charges and other costs shall be borne by the drawee
ordering party. Our deliveries shall be considered as carried out upon and must be immediately reimbursed. We shall not be liable for time-
transfer to the Buyer, the haulage company or haulage contractor, or ly submission, protests, etc. What is more, accepting a bill of exchange
when notification is made of readiness for dispatch. Our deliveries are shall not extend the term of payment of the purchase price.
subject to correct deliveries on schedule by our front-end suppliers. 3. From the time when due and payable on, 1% in interest after due
Freight costs as well as the costs of any insurance for shipping that date will be charged per month begun. If this clause should be in-
might be requested by the Buyer shall be chargeable to the Buyer. The effective, interest after due date is agreed in the amount of 10 %
execution of any special loading or shipping rules set by Buyers shall p.A.
be carried out at the Buyer’s risk and expense. 4. In case of default on payment, we charge banking debit interest
We shall be entitled to carry out partial performance to a reasonable unless the Client proves that our damages are lower than this flat
extent. If in our opinion packaging is required, it shall be carried out rate. At least the agreed interest after due date, however, shall be
in the manner usual in the trade always at the Buyer’s expense. owed also after the default occurs. The assertion of claims for dam-
ages caused by default that are actually higher shall not be ruled
out.
4. Time periods for and dates of delivery 5. If the Client goes into default on payment or acceptance, all out-
standing invoices shall immediately become due and payable. In
1. Delivery dates specified should only be considered as approximate. case of non-compliance with payment obligations within the scope
Any agreement of fixed deadlines shall require our express confir- of the business relations or in case of a proven deterioration in the
mation to be effective. When a fixed deadline had been agreed, Client’s financial position, we shall be entitled to make any further
then the time period for delivery shall begin with the date of ac- work on the order as well as its delivery dependent on reasonable
ceptance of the order, but not before complete clarification of all security or cash in advance. If our products have already been de-
the details for its execution. If the Buyer is obliged to obtain any livered, then we may demand immediate payment of the entire
documents, specifications, permits or clearances, or to furnish a amount remaining regardless of the terms of payment agreed. This
down payment, then the time period for delivery shall not begin shall also apply if it should later emerge that the financial position
until such obligations have been met. had been substantially worse when the contract was concluded than
2. If we are not able to deliver within the contractually agreed period we had assumed. If the security or advance payment are not pro-
of time, then, having set a grace period for us in writing of at least vided within a reasonable time limit to be set by us, we shall be en-
14 days that threatens refusal, the Buyer may withdraw from the titled to withdraw.

64 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
General Terms of Business S O L A R T E C H N I K
of GEO-TEC Solartechnik GmbH, Villacherstraße 95, A-9800 Spittal/Drau

6. The assertion of rights of lien or retention and set-offs against terioration of assets is applied for or proceedings for such are in-
counterclaims shall be inadmissible unless the counterclaims have stituted, we may furthermore demand that the Client: notify us both
been legally established or accepted by us. of the receivables assigned and of their debtor; provide all the in-
7. Payments shall always be credited to the oldest outstanding invoice formation required to collect the receivables; hand over the perti-
or account receivable. The Buyer will be charged with any expenses nent documents and inform the debtors about the assignment. The
arising in connection with bank transfers or based on documentary Client furthermore authorises us already now for such a case as this
collection and documentary credit for our deliveries in the Buyer’s to inform the buyers about the assignment of future claim.
country or the country of destination. 6. We shall be under obligation to release our choice of the items of
security given to us on demand by the Buyer if their value exceeds
the receivables still existing vis-à-vis the Client by more than 20%.
6. Reservation of title
1. All merchandise and products we deliver are delivered only under
reservation of title and extended reservation of title. The merchan- 7. Taking back merchandise
dise shall remain our property until full payment is made (in cases
of payment by cheques and/or bills of exchange, until they are In case merchandise is taken back that is subject to special agree-
cashed) for all debts arising from the business relations, including ments, no claim shall exist to the purchase price being paid back, but
accessory claims and claims for damages. This shall also apply if all rather only to the delivery of replacement merchandise.
or individual claims of ours are included in a current account, and
the balance has been drawn and accepted. If a payment is made by
a cheque/bill-of-exchange transaction (acceptor’s bill), the prop- 8. Make-and-hold orders
erty shall not be transferred until the bill has been cashed without Unless otherwise agreed for make-and-hold order, the merchandise
reservation. must be completely called one year at the latest after being ordered.
2. The Client may neither pledge nor assign by way of security reserved When one year is up we shall be entitled to charge for the merchan-
merchandise (i.e. also merchandise that is still in our co-ownership dise, demanding its immediate payment.
after being connected, mixed or processed according to the fol- We shall furthermore be entitled to charge for the storage costs ac-
lowing conditions). cording to the rates in the haulage industry. The current price valid ap-
3. If important contractual obligations are violated, in particular in plicable on the date of delivery shall apply for make-and-hold orders.
case of default of payment, then, after a dunning procedure, we
shall be entitled to take back the merchandise, the Buyer being
under obligation to surrender such. Unless the Statute Covering In- 9. Notices of defects, warranty & liability
stalment Sales is applied, our taking back or seizing merchandise
shall only imply withdrawal from the contract if we expressly de- 1. The merchandise we deliver must be inspected on arrival without
clare this in writing. If, in case of default of payment, we exercise delay for proper quality, specific performance and completeness.
our right to take back merchandise and take back merchandise de- Complaints must be made in writing. In cases of discernable de-
livered under reservation of title, a credit for this shall only be made fects, we must receive objections immediately after receipt of the
in the amount of 50% of the purchase price set off. The difference merchandise. Defects which cannot be established with a proper
shall be for covering our expenses, such as freight costs, new mar- commercial inspection must be asserted in writing within a time
keting costs, packaging costs, etc. The Client shall retain the right limit of three months after the ordering party receives the mer-
to furnish proof of less damage. chandise, with the right of recourse for defects being lost.
We shall not take responsibility either for material defects caused by
4. The Client must immediately inform us about seizures or any other unsuited or improper storage, transport or manipulation, uses, in-
impending adverse effect on our rights by third parties, stating the correct installation or commissioning by the customer or third par-
details of the circumstances that enable intervention. ties, usual wear, faulty or negligent handling or for any
5. The Buyer shall be entitled to process or resell the reserved mer- consequences of improper alterations or repair work carried out by
chandise in the course of orderly business. The Client’s receivables the customer or third parties without our consent. The same shall
arising from reselling the reserved merchandise are already now as- apply to defects that reduce the value or suitability of the mer-
signed to us as security for all of our claims arising from the busi- chandise only to an insignificant degree. We must in any event be
ness relation. We accept this assignment. If the reserved given opportunity to ascertain defects given notification of. Mer-
merchandise is sold with third-party merchandise either in a chandise objected to must be sent back to us immediately on re-
processed or unprocessed condition, the receivables shall only be quest. Claims arising from defects shall be lost if the customer does
considered as assigned in the amount of the invoice value of the re- not fulfil these obligations or, without our approval, carries out al-
served merchandise delivered by us. The Client shall be authorised terations to merchandise already objected to.
to collect the receivables assigned, doing so for us in a fiduciary ca- 2. In case of material defects, only reworking or replacements may be
pacity. This authorisation to collect may be revoked if the Buyer demanded. If reworking and/or replacement should fail, the Client
does not properly fulfil its payment obligations arising from the shall be entitled to demand a lowering of the purchase price (re-
contract on which they are based. If: payment is suspended; bank- duction) or cancellation of the purchase contract (nullification of
ruptcy, composition proceedings in or out of court or any other de- the sale).

Subject to setting and printing errors. 65


General Terms of Business S O L A R T E C H N I K
of GEO-TEC Solartechnik GmbH, Villacherstraße 95, A-9800 Spittal/Drau

3. Regardless of for what reason, we shall only be liable for grossly 5. If, after unsuccessful subsequent performance, the customer wants
culpable behaviour by the Contractor itself, our executive bodies or to withdraw from the contract due to a defect of title or material de-
our management employees. Any liability for slight negligence and fect, it shall not be entitled to any claims for damages besides this
all fault of vicarious agents shall be excluded. If there is some lia- due to the defect. If, after unsuccessful subsequent performance,
bility under our conditions, the compensation for damages may not the customer wants compensation for damages, the merchandise
exceed the loss incurred and the profit not realised, which the party shall remain with the customer if this can be reasonably expected
having violated the contract, allowing for circumstances that it of it. The compensation for damages shall be limited to the differ-
knew about or should have known about when the contract was con- ence between the purchase price and the value of the defective
cluded. thing. This shall not apply if we have fraudulently caused the breach
4. In cases of functional defects on collectors, for five years as of the of contract. For individuals in business, the warranty is one year as
issue date of the invoice from GEO-TEC we offer (free of charge ex of delivery of the merchandise. This shall not apply if the customer
works) replacement for materials which demonstrably have not met does not notify us about the defect in good time.
one of the requirements of the standard EN 12975. A function guar- Only the manufacturer’s product description is agreed as always defin-
antee shall only be granted on collectors if all the main components ing the qualities of the merchandise. No public statements, recom-
of the collector system (fastening materials, pumping unit, frost mendations or advertising by the manufacturer (for the product
protection, expansion tank, storage unit, control system and metal and/or individual components of it) shall constitute any additional
cladding) are from GEO - TEC and verification is furnished both of contractual specifications of the qualities of the merchandise. If a cus-
installation in technically correct fashion (in accordance with the tomer is given defective installation instructions, we shall only be
state of the art) and regular maintenance by qualified personnel under obligation to deliver defect-free installation instructions, but
(maintenance contract with a specialised company licensed to do only if the defect in the installation instructions stands in the way of
so). A ten-year guarantee shall be granted for systems in Austria if proper installation. If a delivery of products made by us cannot be
all the main components of the collector system (fastening mate- made by the date agreed due to reasons for which we are not respon-
rials, pumping unit, frost protection, expansion tank, storage unit, sible, then parts already manufactured shall, at the Buyer’s expense
control system and metal cladding) are from GEO - TEC and verifi- and risk, be set aside in storage space that is roofed over and guarded.
cation is furnished both of installation in technically correct fash- In such case, the warranty shall begin when the merchandise is put
ion (in accordance with the state of the art) and regular into storage. As payment for this storage of manufactured merchan-
maintenance by qualified personnel (maintenance contract with a dise, we charge 1% of the total order amount for each month of stor-
specialised company licensed to do so). age begun. These storage costs shall be due and payable at the end of
Any liability shall, however, be ruled out for damage due to me- each month of storage. In cases of simple and slight negligence, dam-
chanical strain or changes resulting from influences caused by age claims against us shall be limited to the value of the contract. The
weather. Slight colour deviations or spoiling of the surface which guarantees we make only apply vis-à-vis individuals in business. In
have no influence on the collector’s functioning shall also be ex- case of any transferral of the guarantee there might be, a consumer
cluded from the warranty. What is more, no guarantee shall be as- should be expressly informed about this.
sumed for glass breakage. Liability shall be excluded for damage
due to force majeure and malfunctions attributable to improper as-
sembly or installation of our products. No liability shall be assumed 10. Partial inoperativeness
for any consequential damage due to defects.
In any individual clauses of these conditions should be or become in-
The preconditions for liability by GEO-TEC Solartechnik GmbH are operative, the remaining agreements shall nonetheless remain oper-
that: ative.
• The installation was carried out according to the installation in-
structions in the respective valid version using the pertinent in-
stallation materials from the GEO-TEC organisation. 11. Place of fulfilment and legal venue
• The assembly was carried out by an authorised specialised com- Only the court for A-9800 Spittal/Drau shall be competent for all pres-
pany (heating engineer or fitter). ent and future claims arising from the business relations with mer-
chants who has been entered as a merchant in the commercial register,
• GEO-TEC and/or its representatives have been provided the op-
including claims based on bills of exchange and cheques. It is under-
portunity to inspect complaints on site immediately after any
stood that Austrian law shall apply. The same legal venue shall apply
such defects arise.
if: the Client does not have a general legal venue domestically; it
• There is certification of proper commissioning (properly filled-in moves its residence or habitual residence abroad after concluding the
acceptance certificate). contract; or its residence or habitual residence abroad is not known at
• An annual examination and maintenance has been carried out the time an action is filed.
by a specialised company licensed to do so.
The warranties set up by GEO-TEC shall only apply vis-à-vis con-
tracted companies, and respective parties to a contract shall be
under obligation both to inform end users of this fact and, on re-
quest, to confirm such in writing. Status date: 1 January 2007

66 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Solar Collector Systems S O L A R T E C H N I K

ALU 450 Q, Audi Plant 2005

Subject to setting and printing errors. 67


Trade Fair ISH 2007 S O L A R T E C H N I K

68 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Trade Fair ISH 2007 S O L A R T E C H N I K

Subject to setting and printing errors. 69


Absorber S O L A R T E C H N I K

Titanium absorbers

Your partner for highly selective coatings

In 1995 TiNOX GmbH was the first company to introduce to the market the newly developed, highly
selective absorber coating for solar thermal collectors.
This patented "blue" coating based on titanium and quartz set new performance standards and also
provided an initial environmentally friendly alternative to the black chrome and black nickel coatings
primarily in use back then.
The TiNOX® titanium absorber coating is vaporised onto metal tape in a physical vacuum depositing
(PVD) method, which it developed itself. Using an electron beam, titanium and quartz are vaporised
in a vacuum chamber, which then react with nitrogen and oxygen to form TiNOX (titanium nitride
oxide) and precipitate on the metal tape.
The TiNOX® titanium absorber layer is abrasion-proof and can be processed into full-surface absorber
panels and fins using all common joining methods (laser welding,
plasma welding, ultrasound welding, soft soldering and reshaping).
Its unique coat structure makes TiNOX® a highly selective absorber that has the following
properties:
◆ A high degree of absorption (low reflection) within the visible light range
95% absorption
◆ A low degree of emission (high reflection) within the thermal radiation range
5 % emission

Maximum efficiency for solar thermal collectors

70 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Absorber S O L A R T E C H N I K

Coating structure
The base material used is a metal substrate with good reflection and thermal
conduction.
A thin titanium carbide compound is used as an adhesion layer and diffusion
barrier.
The absorber coating consists of a titanium compound with oxygen and nitro-
gen. This patented titanium oxynitride compound gave TiNOX its name.
There is also an additional anti-reflex coating and protective coating made of
quartz glass on the absorber layer. This minimisation of the surface reflection
further optimises the absorption of solar radiation.

Nature and the Environment


The components of the TiNOX coating are entirely safe for the
human organism and the environment.
TiNOX absorber coating is 100% recyclable.
The metal in the absorber is entirely reusable.

Certified Performance and Long-term Stability


The outstanding properties of TiNOX are confirmed by test certificates from
independent testing institutes, which applies to the optical parameters of the
absorption coefficient α and emission coefficient ε as well as the temperature-
resistance and climate stability.

Guarantee of the performance stability of TiNOX absorbers:


To test the performance stability of selective absorber coatings, a testing
method was developed in co-operation with various renowned research institu-
tes. The so-called "Task X" Test (ISO draft proposal CD 12 952.2) simulates the
influences of temperature and the environment which affect the selective coa-
tings over many years of operation for the collector. The Task X Test guarantees
at least 95% of the efficiency factor in new condition after a simulated period
of use of 25 years.

The Original Blue is made of Titanium.

Subject to setting and printing errors. 71


Notes S O L A R T E C H N I K

72 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at
Let’s
use the
sun…

…for the
future
of our
children!

S O L A R T E C H N I K

VILLACHERSTRASSE 95 • A-9800 SPITTAL/DRAU


Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 • E-Mail: office@geotec.at • www.geotec.at

Anda mungkin juga menyukai