No need to refer
Digatal display & buttons
to "torque table.
Bolts loosening requires higher torque, thus 50% reserved torque is necessary for such application.
POWER
Model
Min.torque (Nm)
Max.torque (Nm)
Square C
D mm
L mm
E mm
Weight (kg)
DTE-62S DTE-85S DTE-125S DTE-255S DTE-390S DTE-500S DTE-620S DTE-820S DTE-1020S DTE-1250S
120 150 250 350 500 800 1200 1400 2000 2200
620 850 1250 2550 3900 5000 6200 8200 10200 12500
430 430 438 485 495 510 520 555 555 555
210
S tandard reaction arm is made of steel.Pls addAafter model No. for AL-TI alloy.
01
Power supply: 220-230V 50Hz; The angled design is more suitable for narrow working space; All electric/pneumatic Contimuous rotation without impact, much more efficient than hydraulic wrench; wrenches are equipped Intelligent torque control system,with fault self-checking function and power-off with high/low speed memory function; function. Torque precision:4%,repeatability:1%,double speed design, high/low speed can be shifted freely; Two ways of torque setting: - Set the torque manually - System recommends torque as per bolt parameters; Human-computer interface. Torque value is shown directly on LCD display. Torque table, is not needed; Electronic system against over-tighten and the clutch against overload, they can protect driving components effectively; Intelligent motor-speed control system, it makes the using life of carbon-brush 5-10 times longer than other brand wrenches.
POWER
Model
Min.torque (Nm)
Max.torque (Nm)
Square C
D mm
L mm
H mm
E mm
Weight (kg)
DTE-62W DTE-85W DTE-125W DTE-255W DTE-390W DTE-500W DTE-620W DTE-820W DTE-1020W DTE-1250W
120 150 250 350 500 800 1200 1400 2000 2200
88 88 88 88 88
5000
6200 8200 10200 12500
110
128 128 128 128
510
340 340 340 340
330
345 378 378 378
210
210 210 210 210
13.4
17 19 19.2 19.5
S tandard reaction arm is made of steel.Pls addAafter model No. for AL-TI alloy.
02
O
POWER
1 2
Model
Min.torque (Nm)
Max.torque (Nm)
Square C
D mm
L mm
E mm
Weight (kg)
DTA-88S DTA-138S DTA-190S DTA-250S DTA-310S DTA-360S DTA-465S DTA-600S DTA-1050S DTA-1250S
120 180 260 390 480 520 650 920 1650 2000
880 1380 1900 2500 3100 3600 4650 6000 10500 12500
365 365 365 365 420 420 420 450 485 495
185 185 185 185 185 185 185 185 185 185
* DTA series pneumatic wrenches includes:Air register,hose,quick coupling(air inlet connector of air register is excluded).
03
As the reverse torque of pneumatic wrench is much higher, 30% reserved torque is enough.
All DOUTEC products are packcd in strong ABS case, easy to trasport and store.
Air Register
L
Packing
O
2 1
POWER
Model
Min.torque (Nm)
Max.torque (Nm)
Square C
D mm
L mm
E mm
H mm
Weight (kg)
DTA-88W DTA-138W DTA-190W DTA-250W DTA-310W DTA-360W DTA-465W DTA-600W DTA-1050W DTA-1250W
120 180 260 390 480 520 650 920 1650 2000
880 1380 1900 2500 3100 3600 4650 6000 10500 12500
258 258 258 258 258 258 258 258 258 258
185 185 185 185 185 185 185 185 185 185
250 250 250 315 315 315 315 345 375 375
* DTA series pneumatic wrenches includes: air register, hose, quick coupling(air inlet connector of air register is excluded).
04
MD Series
Packing
All DOUTEC products are packcd in strong ABS case, easy to trasport and store.
Do not drive mechanical force multiplier by impact power tools. It may destroy the drive system. It is advised to be assisted with manual torque tools.
Max.torque (Nm) Reducing Ratio Input Square S Square Drive C D mm L mm Weight (kg)
Model
88 88 88 88 129 129
Non-Standard
We can make special reaction arm & non-standard socket as per different occasion.
06
DHT Series
The 360swivel hose and spring quick coupler, more reliable, no space restriction, much easier to operate. Dust cap of main axle bolt, make dissembling and maintenance easy.
Unique design, lubricating oil port, no disassembling needed, easy for maintenance.
Back turning proof, lock the bolt while tightening, this design can help release the wrench much easier.
Button to enable quick release of the drive shaft, making operation easier and simpler.
L1
R1
We can offer square drives and reaction arms to different specifications. In order to choose the correct model, please contact a DOUTEC Sales Engineer or your nearest distributor.
H4
Locking Unit
H3
Realease triggler.
L2 L3
H1 H2
Model
Drive Shaft
L1 (mm)
L2 (mm)
L3 (mm)
H1 (mm)
H2 (mm)
H3 (mm)
H4 (mm)
R1 (mm)
Weight Kg
*If you want an OEM special torque wrench in special situations, please contact KENNER sales engineer or the nearest distributor.
07
DHC Series
Working Head
Power Unit
360swivel coupler W2
H1 H2
L1
W1
H1 mm
H2 mm
W1
W2
Weight
mm mm
mm mm mm Kg
30 32 41 53 64 70 84
50 50 65 85 99 110 132
38 41 53 68 85 98 115
Backstop Wrench
Features: High-strength industry design, scientific and safe; All are mechanic, not hydraulic; Lock structure is simple and easy to release; Comfortable handle and skid-proof reaction arm; Changeable working head, suitable nut range 19mm - 80mm; Simple button enables to change working head quickly; Can prevent the shaft from turning with nut, quite different from the old ones which needed a pad.
Mericmm DCM19-27S DCM30-41S DCM46-60S DCM65-80S
Model A/F
DC-19 DC-22 DC-24 DC-27 DC-30 DC-32 DC-36 DC-41 DC-46 DC-50 DC-55 DC-60 DC-65 DC-70 DC-75 DC-80 19 22 24 27 30 32 36 41 46 50 55 60 65 70 75 80
Model A/F
DC-012 DC-014 DC-100 DC-102 DC-104 DC-107 DC-110 DC-200 DC-203 DC-206 DC-209 DC-212 DC-215 DC-302 3/4 7/8 1 1 1/8 1 1/4 1 7/16 1 5/8 2 2 3/16 2 3/8 2 9/16 2 3/4 2 15/16 3 1/8
08