(P)-BE
MAIN FEATURES & BENEFITS:
High mechanical and thermal stability
Approved for Food Contact Use acc. to CFR Title 21 & EEC/1935/2004
INDUSTRIES:
Dairy
Fermentation
Health Care
Biotechnology
Web: www.donaldson.com
(P)-BE
The wounded ventilation depth filter (P)BE is designed and developed for the following applications:
Pharmaceutical industry Biotechnology Breweries Dairies Aseptic packaging Food industry Hospitals
-2-
PRODUCT DESCRIPTION
(P)-BE
Product Specifications Retention Rate Filtration Surface Temperature Range > / = 99,999 % at < / = 0,2 m 0,05 m2 per 250 mm element (10) -20C (-4F) to 200C (400F) ; > 150C (300F) only for dry air Maximum Differential Pressure 5 bar (75 psid), independent of the system pressure or the flow direction Typical Continuous Air Service Life Time Typical Vent Service Life Time Cumulative Steaming Time* 12 months 6 months 141C (286 F), Saturated Steam, 10 minutes, several cycles
* Figures are based on lab tests to evaluate steaming resistance. Filter elements need to be checked in actual use. Contact Donaldson for recommended Autoclaving/Steaming procedures.
-3-
PRODUCT SPECIFICATIONS
(P)-BE
All components of the (P)-BE filter element are FDA listed for food contact use in the Code of Federal Regulations (CFR), Title 21
Filter Materials Filter Matrix: Upstream Support: Downstream Support: Outer Guard: Inner Guard: End Caps: Bonding Materials O-Rings: Alternatively: Borosilicate PTFE PTFE Stainless Steel 1.4301 Stainless Steel 1.4301 Stainless Steel 1.4301 Silicone Silicone EPDM PTFE over silicone PTFE over viton
CFR Title 177.2260 177.1550 177.1550 211.65 211.65 211.65 177.2600 177.2600 177.2600 177.1550 177.1550
All products have been inspected and released by Quality Assurance as having met the following requirements:
Donaldson Filtration Deutschland GmbH confirms that all materials used for the PBE element meet regulatory and legislative requirements and guidelines for food contact as detailed in European Regulation (EC) Number 1935/2004. These articles are intended for indirect food use in filtration of gases, therefore migration testing has been limited to an atmospheric and watery environment.
All filter elements are integrity tested according to ASTM D 2986-91 and DIN EN 1822 to verify compliance with established quality and design specifications and to assure consistent and reliable performance.
-4-
MATERIAL COMPLIANCE
(P)-BE
a inch 5 10 20 30
-5-
FLOW CHARACTERISTICS
Process Filtration
(P)-BE
a mm 76 104 104 128 128 180 128 180 254 381 510 764 764 inch 3 4 4 5 5 7 5 7 10 15 20 30 30 mm 87 118 118 142 142 194 144 196 270 397 526 780 780
b inch 3,42 4,64 4,64 5,59 5,59 7,64 5,67 7,71 10,63 15,63 20,63 30,63 30,63
03/10 04/10 04/20 05/20 05/25 07/25 05/30 07/30 10/30 15/30 20/30 30/30 30/50
CF** 0,12 0,17 0,19 0,25 0,32 0,47 0,46 0,68 1,00 1,55 2,10 3,28 5,89
* Plug-type connection with double-o-ring ** Correction Factor Filtration Surface & Flow Rate
Dimensions (thread connection): Size 03/10 07/30 10/30 15/30 20/30 30/30 30/50 thread connection a b mm inch mm inch 76 3 39 1,53 180 7 206 8,11 254 10 281 11,06 381 15 407 16,02 508 20 534 21,02 762 30 788 31,02 762 30 788 31,02 c inch G2 G2 G2 G2 G2 G2 G3
Integrity test of this element to be done by DOP Test. For information on test equipment or test services, please contact your Donaldson Sales Engineer and visit our website at www.donaldson.com!
(Rev02 03/11)