Benefits
Multi band applications 700 MHz, SMR 800 MHz, Cellular 850 MHz, PCS 1900 MHz, AWS 1710/2170 MHz Enables efficient evolution of wireless networks Dramatically increase site capacity through higher order sectorization Avoid carrier-adds and building of new capacity sites Boosts data throughput by lowering interference Patented asymmetrical beam shape maximizes coverage in a standard tri-sector cell plan Provides remote control of electrical downtilt of antenna for easier optimization
Features
Asymmetrical dual beams optimized to match existing cloverleaf (65) patterns over a wide
range of frequency bands (698-824 MHz); (824-894 MHz); (1710 -1920 MHz); and (19202170 MHz) Slim and low weight single panel design supporting four beams without mount changes Dual +45 and -45 cross-polarization for Left and Right beams Independent adjustable sub-beams provide unmatched optimization flexibility Separate Low-band and High-band ports, Left and Right beams, support 4 sub-sectors 3GPP/AISG 2.0 compliant Daisy chaining capability Software upgradeable Rugged, weather resistant and highly reliable internal design
Applications
Upgrade of data-throughput or capacity constrained sites Spectrum limited markets Deferral of CDMA/EVDO or UMTS//HSPA+ carrier adds Spectrum clearing and refarming
www.cciproducts.com
4/12/2012
698-824 MHz 34 Asymmetric 11.6 1 < -17dB 15.5 1.0 dBi Dual Linear 45 < 1.5:1 > 30dB > 25dB 0 to 10 50 Ohms 250 Watts CW -150dBc DC Ground
824-894 MHz 30 Asymmetric 11.0 1 < -17dB 16.0 1.0 dBi Dual Linear 45 < 1.5:1 > 30dB > 25dB 0 to 10 50 Ohms 250 Watts CW -150dBc DC Ground
1710-1920 MHz 33 Asymmetric 6.0 0.5 < -17dB 17.5 1.0 dBi Dual Linear 45 < 1.5:1 > 30dB > 30dB 0 to 8 50 Ohms 250 Watts CW -150dBc DC Ground
1920-2170 MHz 30 Asymmetric 5.5 0.5 < -17dB 18.1 1.0 dBi Dual Linear 45 < 1.5:1 > 30dB > 30dB 0 to 8 50 Ohms 250 Watts CW -150dBc DC Ground
Mechanical Specifications
Dimensions (LxWxD) Survival Wind Speed Front Wind Load Side Wind Load Equivalent Flat Plate Area Weight (without Mounting) RET System Weight Connector Mounting Pole 72.0 x 28.5 x 9.4 inches (1828 x 723 x 240 mm) > 120 mph (> 193 km/hr ) 438 lbs (1946 N) @ 100 mph (161 kph) 172 lbs (764 N) @ 100 mph (161 kph) 17.0 ft (1.6 m )
2 2
L+ L- R+ R- L+ L- R+ R45 45 45 45 45 45 45 45 H H H H L L L L
94.6 lbs (43 kg) 6.6 lbs (3 kg) 8; 7-16 DIN female 2-5 inches (5-12 cm)
Bottom View
H - High Band L - Low Band
Rear View
Antenna Patterns*
*Typical antenna patterns. For detail information on antenna pattern, please contact us at info@cciproducts.com. All specifications are subject to change without notice.
www.cciproducts.com 4/12/2012
USA: 89 Leuning Street, South Hackensack, NJ 07606 Telephone: 201-342-3338, FAX: 201-342-3339 Canada: 11 Hines Road, Suite 200, Ottawa, ON Canada K2K 2X1 Telephone: 613-591-6696, FAX: 613-591-6637
Page 2
Revision 1.6
Electrical Specification
Interface Signal Input Voltage Range Current consumption during tilting Current consumption idle Hardware Interface Input Connector Output Connector Data | dc 10-30 Vdc 120mA at Vin = 24V 55mA at Vin=24V AISG - RS 485 A/B 1x8-pin Daisy Chain In Male 1x8-pin Daisy Chain Out Female
Standards Compliance
Safety Emission Immunity Environmental EN 60950-1, UL 60950-1 EN 55022 EN 55024 IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC 60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-2-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN60529 IP24
Regulatory Certification
AISG, FCC Part 15 Class B, CE, CSA US USA: 89 Leuning Street, South Hackensack, NJ 07606 Telephone: 201-342-3338, FAX: 201-342-3339 Canada: 11 Hines Road, Suite 200, Ottawa, ON Canada K2K 2X1 Telephone: 613-591-6696, FAX: 613-591-6637
www.cciproducts.com 4/12/2012
Page 3
Revision 1.6