Modification Date: 19/03/2013 Abstract: This document described the MIBs supported by F1 devices.
Approvals 3Com Product Manager Peter Doggart JVCo Product Manager David Wang 3Com Programme Manager Andrew Stacey JVCo Programme Manager Deng Xing 3Com Software Leader Peter Saunderson JVCo Software Leader Adrian Zhang
Title
Name
Signature
Date
I II 1. 2. 3. 4.
REVISION HISTORY REFERENCES INTRODUCTION STATEMENT MIB SUPPORT & RFC COMPLIANCE RFC1213 - MIB-II 4.1 4.2 4.2.1 4.2.2 4.3 4.3.1 4.4 4.4.1 4.4.2 4.4.3 4.5 4.5.1 4.5.2 4.6 4.6.1 4.6.2 4.7 4.8 4.8.1 SYSTEM GROUP {MIB-2.1} INTERFACES GROUP{MIB-2.2} ifIndex Value Allocation ifTable mib ADDRESS TRANSLATION GROUP(AT) {MIB-2.3} atTable: IP GROUP {MIB-2.4} Scalar Objects: ipAddrTable: ipRouteTable: TCP GROUP{MIB-2.6} Scalar objects: tcpConnTable: UDP GROUP{MIB-2.7} Scalar objects: udpTable: SNMP GROUP{MIB-2.11} ARP MIB ipNetToMediaTable
13 14 15 16 16 19 19 20 20 21 23 23 23 23 24 24 24 24 25 25 25 25 25 26 26 27 27 28 28 28 28 28 28 29 29 29 29 29 29 29 30 30 30 30 30
5.
6.
ETHERLIKE-MIB-RFC2665 6.1
DOT3STATSTABLE
7.
RFC1493 BRIDGE-MIB 7.1 7.1.1 7.1.2 7.1.3 7.1.4 7.2 7.2.1 7.2.2 7.2.3 7.2.4
DOT1DBASE
8.
RFC2674 P-BRIDGE-MIB Q-BRIDGE-MIB 8.1 8.1.1 8.1.2 P-BRIDGE MIB dot1dExtBase { pBridgeMIBObjects.1} dot1dPriority{ pBridgeMIBObjects.2}
9.
9.1 9.2 9.2.1 9.3 9.4 9.4.1 9.4.2 9.4.3 9.5 9.5.1 9.6 9.6.1 9.6.2
9.6.2.1 9.6.2.2
SNMPMIB { SNMPMODULES.1} SNMPFRAMEWORKMIB{ SNMPMODULES.10} the allocation of snmpEngineID SNMPMPDMIB{ SNMPMODULES.11} SNMPTARGETMIB{ SNMPMODULES.12} Scalar objects: snmpTargetAddrTable snmpTargetParamsTable SNMPNOTIFICATIONMIB{ SNMPMODULES.13} snmpNotifyTable{ snmpNotificationMIB.1} SNMPUSMMIB{ SNMPMODULES.15} usmStats group { snmpUsmMIB.1} usmUser group { snmpUsmMIB.2}
Scalar objects { usmUser.1}: usmUserTable { usmUser.2}:
SNMPVACMMIB{ SNMPMODULES.16}
30 31 31 31 32 32 32 33 34 34 35 35 35
35 35
9.7 9.7.1
9.7.1.1 9.7.1.2 9.7.1.3
vacmMIBObjects
vacmContextTable { vacmMIBObjects.1} vacmSecurityToGroupTable { vacmMIBObjects.2} vacmAccessTable { vacmMIBObjects.4}:
36 36
36 36 36
9.7.2
9.7.2.1 9.7.2.2
vacmMIBViews
Scalar { vacmMIBViews.1} vacmViewTreeFamilyTable{ vacmMIBViews.2}
37
37 37
10.
37 37 37 38
38 39
10.1.3
10.1.3.1
Alarm
alarmTable
40
40
10.1.4
10.1.4.1 10.1.4.2
Event
eventTable: logTable:
40
40 41
RFC2021 - PROBECONFIG RFC3237 - HC-RMON-MIB etherHistoryHighCapacityGroup(includes etherHistoryHighCapacityTable) etherStatsHighCapacityTable etherHistoryHighCapacityTable RFC2613- SMON A3COM-HUAWEI-PERFORMANCE-MIB - EXTENSION TO RMON ALARM priAlarmTable
41 41 41 41 42 43 43 43 44 44 44 44 44 45 45 45 45 45 45 46
11.1 11.1.1 11.1.2 11.1.3 11.2 11.2.1 11.2.2 11.2.3 12. 12.1 12.2
RFC1850-OSPF
OSPFGENERALGROUP { OSPF 1 } OSPFAREATABLE { OSPF 2 }
12.2.1 12.3 12.3.1 12.4 12.4.1 12.5 12.5.1 12.6 12.6.1 12.7 12.7.1 12.8 12.8.1 12.9 12.9.1 12.10 12.10.1 12.11 12.11.1 12.12 12.12.1 12.13 12.13.1 13.
ospfAreaEntry { ospfAreaTable 1 } OSPFSTUBAREATABLE { OSPF 3 } ospfStubAreaEntry { ospfStubAreaTable 1 } OSPFLSDBTABLE { OSPF 4 } ospfLsdbEntry { ospfLsdbTable 1 } OSPFAREARANGETABLE { OSPF 5 } ospfAreaRangeEntry { ospfAreaRangeTable 1 } OSPFHOSTTABLE { OSPF 6 } ospfHostEntry { ospfHostTable 1 } OSPFIFTABLE { OSPF 7 } ospfIfEntry { ospfIfTable 1 } OSPFIFMETRICTABLE { OSPF 8 } ospfIfMetricEntry { ospfIfMetricTable 1 } OSPFVIRTIFTABLE { OSPF 9 } ospfVirtIfEntry { ospfVirtIfTable 1 } OSPFNBRTABLE { OSPF 10 } ospfNbrEntry { ospfNbrTable 1 } OSPFVIRTNBRTABLE { OSPF 11 } ospfVirtNbrEntry { ospfVirtNbrTable 1 } OSPFEXTLSDBTABLE { OSPF 12 } ospfExtLsdbEntry { ospfExtLsdbTable 1 } OSPFAREAAGGREGATETABLE { OSPF 14 } ospfAreaAggregateEntry { ospfAreaAggregateTable 1 }
46 46 46 46 46 47 47 47 47 47 47 48 48 48 48 49 49 49 49 50 50 50 50 50 50 51 51 51 51 51 51 52 52 52 52 53 53 53 54 54 54 54 54 54 54 54 54 55
RFC 1724-RIPV2
RIP2GLOBALS { RIP2 1 } RIP2IFSTATTABLE { RIP2 2 }
13.1 13.2 13.2.1 13.3 13.3.1 13.4 13.4.1 14. 15. 15.1 15.2 16. 16.1 16.2 17. 17.1 17.2 18. 18.1 18.2 19. 19.1 19.2 20. IPV6-MIB
rip2IfStatEntry { rip2IfStatTable 1 } RIP2IFCONFTABLE { RIP2 3 } rip2IfConfEntry { rip2IfConfTable 1 } RIP2PEERTABLE { RIP2 4 } Rip2PeerEntry { rip2PeerTable 1 }
IP-FORWARD-MIB SCALAR OBJECTS IPCIDRROUTETABLE IPV6-TCP-MIB SCALAR OBJECTS IPV6TCPCONNTABLE IPV6-UDP-MIB SCALAR OBJECTS IPV6UDPTABLE IPV6-ICMP-MIB SCALAR OBJECTS IPV6IFICMPTABLE
55 55 56 56 56 57 57 57 57 58 58 58 58
58 59 59
21.1 H3CFLASHDEVICE 21.1.1 H3cFlhSupportNum: The number of flash supported by system. 21.1.2 H3cFlashTable: The information for each flash. 21.1.3 h3cFlashChips:The information for each chip in a flash(h3cFlashManMIBObjects.2)
21.1.3.1 21.1.3.2 21.1.3.3 h3cFlhChipTable h3cFlhPartitionTable huaweiFlhFileTable
H3CFLASHOPERATE
h3cFlhOpTable
59 61 62 63 63 63 64 64 64 66 66 66 67 67 67 67 68 68 68 69 69 69 69 70 70 72 72 72 72 8} hwLswDhcpMib 1 } 72 72
72 72
A3COM-HUAWEI-CONFIG-MAN-MIB THE CONFIGURATION LOG MANAGEMENT- HWCFGLOG MIB GROUP scalar objects h3cCfgLogTable THE CONFIGURATION BACKUP AND RESTORE- H3CCFGOPERATE MIB GROUP scalar objects h3cCfgOperateTable h3cCfgOperateResultTable
23. A3COM-HUAWEI-SYS-MAN-MIB: SYSTEM INFORMATION AND SYSTEM MANAGEMENT 23.1 23.1.1 23.2 23.2.1 23.2.2 23.3 23.3.1 23.3.2 23.4 23.4.1 23.4.2 23.5 23.5.1 23.6 24.
H3CSYSCLOCK-SYSTEM CLOCK MANAGEMENT GROUP
Scalar object H3CSYSRELOAD-SYSTEM RELOAD MANAGEMENT GROUP Scalar object h3cSysReloadScheduleTable H3CSYSIMAGE-SYSTEM IMAGE MANAGEMENT GROUP Scalar object h3cSysImageTable H3CSYSCFGFILE-SYSTEM CONFIGURATION FILES MANAGEMENT GROUP Scalar object h3cSysCFGFileTable H3CSYSCURRENT-SYSTEM CURRENT STATUS GROUP h3cSysCurTable H3CSYSBTMLOADTABLE
A3COM-HUAWEI-LSWIGSP-MIB
HWLSWIGMPSNOOPINGMIB { LSW COMMON
7} hwLswIgmpsnoopingMibObject { hwLswIgmpsnoopingMib 1 }
A3COM-HUAWEI-LSWDHCP-MIB
HWLSWDHCPMIB { LSWCOMMON
25.1 25.1.1
25.1.1.1 25.1.1.2
hwLswDhcpMibObject {
25.1.1.3
hwDhcpToL3IfTable {hwLswDhcpMibObject 3 }
72
26. 27.
73 73 73 73
73 73
27.1 27.1.1
27.1.1.1 27.1.1.2
27.1.2
27.1.2.1
dot3adAggPort Group
dot3adAggPortTable
73
73
27.1.3
27.1.3.1 27.1.3.2
dot3adAggPortStatsTable
dot3adAggPortListTable dot3adAggPortDebugTable
74
74 75
27.1.4
27.1.4.1
dot3adTablesLastChanged
dot3adAggPortListTable
75
75
27.2 27.2.1 27.2.2 27.2.3 28. 28.1 28.2 29. 29.1 29.2 29.3 29.4 29.5 30. 30.1 31.
76 76 76 77 77 77 78 78 78 79 79 79 80 80 80 81
IEEE8021D-STP-MIB
DOT1DSTPPORTTABLE DOT1DSTPGLOBALTABLE
31.1 31.1.1
31.1.1.1 31.1.1.2 31.1.1.3 31.1.1.4 31.1.1.5
entityPhysicalTable
{ entityPhysical
1}
81 81
81 81 83 91 92
OverViews Index Range Table: Syntax or meaning of each object in physical table: Example Implementation of stack port and combo port
31.1.2 31.1.3 31.1.4 31.1.5 31.1.6 31.2 31.2.1 32. 32.1 32.2 33. 33.1
entLogicalTable { entityLogical 1 } entLPMappingTable { entityMapping 1} entAliasMappingTable{ entityMapping 2} entPhysicalContainsTable { entityMapping entityGeneral { entityMIBObjects 4 } A3COM-HUAWEI-ENTITY-EXT-MIB h3cEntityExtStateTable
3}
93 94 94 94 94 94 95 97 97 98 98 98
HWTRNGABSOLUTETABLE HWTRNGPERIODICTABLE
98 99 99
34.1 34.2 34.3 34.4 34.5 34.6 34.7 34.8 34.9 34.10 34.11 34.12 34.13 34.14 34.15 34.16 34.17 34.18 34.19 34.20 34.21 34.22 34.23 34.24 34.25 34.26 35. 35.1 35.2 35.3 35.4 35.5 35.6 35.7 35.8 35.9 36. ACL MIBS
SCALAR OBJECTS HW PORTMONITORBOTHIFINDEX HWQUEUETABLE HWRATELIMITTABLE HW PRIORITYTABLE HWREDIRECTTABLE HW STATISTICTABLE HWMIRRORTABLE NOTE:THIS TABLE ONLY SUPPORT CREATE AND DESTROY HW PORTMIRRORTABLE HWLINERATETABLE HWREDTABLE HWMIRRORGROUPTABLE HWFLOWTEMPTABLE HWFLOWTEMPENABLETABLE HWTRAFFICSHAPETABLE HW PORTQUEUETABLE HWDROPMODETABLE HWW REDTABLE HWCOSTOLOCALPRECEDENCEMAPTABLE HWCOSTODROPPRECEDENCEMAPTABLE HWDSCPMAPTABLE HW EXPMAPTABLE HWLOCALPRECEDENCEMAPTABLE HW PORTW REDTABLE HWREMARKVLANIDTABLE
99 99 99 100 100 101 102 103 103 103 103 104 104 104 104 104 104 104 104 104 104 104 105 105 105 105 106
106 106 106 106 107 107 108 109 109 109 109 110 110 110 111 112 113 114 114 114 115
A3COM-HUAWEI-ISWINF-MIB SCALAR OBJECTS OF HWLSWL2INFMIBOBJECT HWIFHYBRIDPORTTABLE hwifHybridPortTable HWIFVLANTRUNKSTATUSTABLE HWETHERNETTABLE HWIFXXTABLE HWIFAGGREGATETABLE
A3COM-HUAWEI-ISWVLAN-MIB
HWDOT1QVLANMIBTABLE
hwdot1qVlanMIBTable HW VLANINTERFACETABLE
115 116 116 116 116 116 116 116 116 117 117 117 118 118 118 118 119 119 119 119 119 119 120 120 120 121 121 121 122 122 122 122 122 123 123 124 124 124 125 125 125 125 126 128 128
SOFTWARE VERSION MIB REMOTE POLLING MIBS 802.1X MIBS IEEE8021-PAE-MIB Scalar Objects dot1xPaePortTable dot1xAuthConfigTable dot1xAuthStatsTable dot1xAuthSessionStatsTable A3COM-HUAWEI-8021PAE-MIB Scalar Objects hwdot1xAuthConfigExtTable
41.1 41.1.1 41.1.2 41.1.3 41.1.4 41.1.5 41.2 41.2.1 41.2.2 42.
42.1 42.1.1 42.1.2 42.2 42.2.1 42.2.2 43. 44. 44.1 44.2 44.3 44.4 44.5 45. 45.1 46. 46.1 46.2 46.3 47. 47.1 47.2 47.3 48. 48.1 48.2 49. 49.1
A3COM-HUAWEI-PING-MIB
HW PINGAGENTENABLE
A3COM-HUAWEI-FTM-MIB SCALAR OBJECTS H3CFTMUNITTABLE NOTIFICATIONS A3COM-HUAWEI-VOICE-VLAN-MIB SCALAR OBJECTS H3CVOICEVLANOUITABLE H3CVOICEVLANPORTT ABLE(THIS TABLE IS FOR F1 VERSION 1.5.) SUPPORTED TRAPS SUPPORTED STANDARD TRAPS SUPPORTED PRIVATE TRAPS RFC3621 POWER-ETHERNET-MIB
PETTHNOTIFICATIONS
49.2 49.2.1 49.2.2 49.2.3 49.3 49.3.1 49.3.2 50. 50.1 50.2 50.3 51.
PETHOBJECTS
129 129 129 129 130 130 130 130 130 130 130 131 131 131
131
A3COM-HUAWEI-POWER-ETHERNET-EXT-MIB
H3CPSEPORTTABLE H3CMAINPSETABLE SCALAR OBJECTS
51.1 51.1.1
51.1.1.1
51.1.2
51.1.2.1 51.1.2.2 51.1.2.3
QosActions
h3cQoSTrafficLimitTable h3cQoSTrafficPriorityTable h3cQosTrafficFilterTable
131
131 132 133
51.1.3
51.1.3.1 51.1.3.2 51.1.3.3
QosProfPortMapping
H3cQosProfPortMappingTable h3cQoSProfPortMappingModeTable h3cQoSProfDynPortMappingTable
H3CQOSPROFPORTMAPPINGTRAPS
133
133 134 134
51.2 52. 52.1 53. 54. 55. 55.1 55.2 55.3 55.4 55.5 56. 57. 57.1 57.2 58. 58.1 59. 59.1 60. 60.1 60.2 60.3
134 134 134 135 135 135 135 136 136 136 136 137 137 137 137 137 137 137 138 138 138 138 139
A3COM-HUAWEI-ENTRELATION-MIB
H3CENTRELATIONTABLE
A3COM-HUAWEI-OBJECT-INFO-MIB
H3COBJECTINFOTABLE
60.4 60.5 60.6 60.7 61. 61.1 61.2 61.3 61.4 62. 62.1 62.2 63. 63.1 63.2 63.3 64. 64.1 64.2 64.3 64.4 64.5 64.6 64.7 64.8 64.9 65. 65.1 65.2 65.3 65.4 66. 66.1 66.2 66.3 66.4 66.5 67. 67.1 67.2 67.3 68. 68.1 68.2 68.3 68.4 68.5 BGP4-MIB
140 140 140 141 142 142 143 144 145 145 145 146 148 148 149 150 153 153 155 156 156 157 158 158 159 159 160 160 160 161 163 163 163 164 164 164 165 165 165 165 166 166
A3COM-HUAWEI-RADIUS-MIB
H3CRDINFOTABLE H3CRDACCINFOTABLE H3CRADIUSACCSERVERTABLE SUPPORTED TRAPS
A3COM-HUAWEI-NTP-MIB
HWNTPSYSTEMMIBOBJECTS HWNTPPEERTABLE
A3COM-HUAWEI-USER-MIB
SCALAR OBJECTS H3CUSERINFOTABLE H3CUSERATTRIBUTETABLE
A3COM-HUAWEI-SYSLOG-MIB
SCALAR OBJECTS H3CSYSLOGLOGBUFFERTABLE H3CSYSLOGTRAPBUFFERTABLE H3CSYSLOGLOGHOSTTABLE H3CSYSLOGCHANNELTABLE H3CSYSLOGMODULETABLE H3CSYSLOGLOGTABLE H3CSYSLOGTRAPTABLE H3CSYSLOGDEBUGTABLE
A3COM-HUAWEI-DOMAIN-MIB SCALAR OBJECTS H3CDOMAININFOTABLE H3CDOMAINSCHEMETABLE H3CDOMAINIPPOOLTABLE (THIS TABLE IS NOT SUPPORTED) A3COM-HUAWEI-MPM-MIB SCALAR OBJECTS H3CMPORTGROUPJOINTABLE H3CMPORTGROUPTABLE H3CMPORTCONFIGTABLE H3CHOSTSTATICJOINTABLE A3COM-HUAWEI-IF-EXT-MIB SCALAR OBJECTS H3CIFSTATTABLE H3CIFSPEEDSTATTABLE
69.
A3COM-HUAWEI-NQA-MIB SCALAR OBJECTS HWNQACTLTABLE HWNQARESULTSTABLE HWNQAJITTERSTATSTABLE HWNQATCPSERVERTABLE HWNQAUDPSERVERTABLE HWNQASTATISTICSRESULTSTABLE HWNQAGROUPSTATSJITTERTABLE HWNQASTATISTICSCTLTABLE HWNQAREACTIONTABLE 1.1 average types 1.2 accumulative types 1.3 consecutive ttype 2.1 accumulative types 2.2 consecutive type 3.1 average type 3.2 accumulative type 4.1 accumulative types 5.1 average type 5.2 accumulative types 6.1 average type 6.2 accumulative types HWNQASTATISTICSREACTIONTABLE
168 168 169 170 170 171 171 172 172 174 175 176 177 177 177 177 178 178 178 179 179 179 180 180 181 181 181 181 181 182 182 183 183 183 184 184 184 184 184 184 185 185 185 185 186 186 186 190 190 191
69.1 69.2 69.3 69.4 69.5 69.6 69.7 69.8 69.9 69.10 69.10.1 69.10.2 69.10.3 69.10.4 69.10.5 69.10.6 69.10.7 69.10.8 69.10.9 69.10.10 69.10.11 69.10.12 69.11 70. 70.1 70.2 71. 71.1 71.2 72. 73.
A3COM-HUAWEI-LPBKDT-MIB
H3CLPBKDTOBJECTS SUPPORTED PRIVATE TRAPS
A3COM-HUAWEI-LLDP-EXT-MIB SCALAR OBJECTS H3CLLDPPORTCONFIGTABLE FOLLOWING PRIVATE MIB DEFINED IN 3FC-510 ADDITIONAL REQUIREMENT IN 3FC 510 ADDITIONAL AGENT UPDATE REQUIREMENTS ADDITIONAL QOS REQUIREMENTS ADDITIONAL BACKUP / RESTORE REQUIREMENTS IP Address, Default Gateway and Subnet Mask MAC Address Checking HARDWARE CONFIGURATION CHECKING VERSION NUMBERING MIB ITEMS USED BY 3NS BACKUP AND RESTORE
73.1 73.2 73.3 73.3.1 73.3.2 73.4 73.5 73.6 74. 75.
FACTORY DEFAULTS AGENT UPDATE HOW TO UPGRADE THE AGENT 5600G Agent Update Algorithm The MIBs concerned: Functions of the MIBs: An example: HOW TO BACKUP & RESTORE THE AGENT The MIBs concerned: Functions of the MIBs:
191 192 192 192 193 193 193 194 194 194 194 195 195 195 195 195 195 195 195 196 196 196 196 196 196 196 196 197 197 197 197 197 197 197 197 197
197
ABOUT 760-174 ABOUT SECTION 4.1 3COM REQUIREMENT ABOUT SECTION 4.4 MIB COMPANION ABOUT SECTION 4.5 AGENT VERSION ABOUT SECTION 4.6 TRAP DESTINATION ABOUT SECTION 4.8 TOPOLOGY ABOUT SECTION 4.9 MODULE AND PORT SIZING ABOUT SECTION 4.10 HC-RMON ABOUT SECTION 4.11 AGENT UPDATE ABOUT SECTION 4.12 BACKUP AND RESTORE ABOUT SECTION 4.12 COMPONENT MONITORS ABOUT SECTION 4.14 MANAGEMENT VIA CLI COMMANDS ABOUT SECTION 4.15 POE MIB ABOUT SECTION 5 AGENT-MEDIUM PRIORITY About section 5.1 VLANs About section 5.2 device warranty registration About section 5.3 radius and network login ABOUT SECTION 6 AGENT-LOW PRIORITY About section 6.1 Rmon enable About section 6.2 Qos ABOUT SECTION 7 SWITCH MANAGER AND ROUTER MANAGER About section 7.1 Testing About section 7.2 Installation About section 7.3 Supported Platform About section 7.4 Release Notes About section 7.5 new feature list About section 7.6 Device Mimic About section 7.7 Common bug fixes About section 7.8 Co-Existence About section 7.9 vresion number About section 7.10 Improving consistency between SM/RM About section 7.11 Improving online help ABOUT SECTION 4.1.6 CREATE RADIUS SERVER TASK How to create radius Scheme
Create Scheme Algorithm
76.1 76.2 76.3 76.4 76.5 76.6 76.7 76.8 76.9 76.10 76.11 76.12 76.13 76.13.1 76.13.2 76.13.3 76.14 76.14.1 76.14.2 76.15 76.15.1 76.15.2 76.15.3 76.15.4 76.15.5 76.15.6 76.15.7 76.15.8 76.15.9 76.15.10 76.15.11 76.16 76.16.1
76.16.1.1
76.16.2
76.16.2.1 76.16.2.2 76.16.2.3
198
198 199 199
76.16.3
76.16.3.1
199
199
77.
APPENDIX
199
Revision History
Date 2006-11-13 2006-11-13 Author F1 Agent Team longyin Reason for Change First Draft 1. add A3COM-HUAWEI-LswDEVM-MIB by panxidong for D30840 2. add A3COM-HUAWEI-MPM-MIB by D31285 1. modified description of h3cMPortFastLeaveStatus, h3cMPortGroupLimitNumber, h3cMPortGroupLimitReplace by zuoyue for D32441 1. delete h3cSecureAddressTable by huangyang for D26153 2. add hwifEthernetAutoSpeedMask and hwifEthernetAutoSpeedMask by jinyongfeng for D29043 1. modify the descriptionof h3cFlhOperSourceFile, h3cFlhOperDestinationFile by zhangqingjun for F03415 2. modified description of pingCtlDataSize by cuixiaohui for D32170 1. modified the description of pethPsePortIndex by wanglirong for LSOD00438 1. modify the description of eventCommunity by zhaofeng for LSD16507 1. Add reboot algorithm by Paola for LSOD02127 2. add hwAggPortInactiveNotification2, hwAggPortActiveNotification by zhangjian for D32474 1. Add 3CR17280-72 by ligaoxu for LSOD05465 1. indicate that ftp protocol also supports to backup and restore for the whole fabric in the section How to backup & restore the agent 1. Added description of h3cCfgOperateTable. 2. Added dot1qVlanStaticTable. 1. Change the description of h3cDomainVlanAssignMode 1. Insert Section BGP4-MIB 1. Insert Section A3COM-HUAWEI-NQA-MIB 1. Modified the description fo h3cCfgOperateFileName 1. Add A3COM-HUAWEI-LPBKDT-MIB mib, inserted before 'Following PRIVATE mib defined in 3FC-510' 1. Modify the section 48.2, add traps hwSubcardRemove to hwLoadFinished 1. Modified the description fo h3cCfgOperateFileName, When h3cCfgOperateType is Net2Startup or Net2Running, directory is supported at this time 2. Modify section h3cvoiceVlanPortTable in voice vlan
0.03
2007-02-10
longyin
0.04
2007-03-10
Longyin
0.05
2007-3-16
wangyingxia
0.09 0.10
2007-09-27 2008-09-10
longyin wangshunli
mib 3. Add A3COM-HUAWEI-LLDP-EXT-MIB mib, inserted before 'Following PRIVATE mib defined in 3FC-510' 0.19 2009-08-27 Wangshunli 1. Add A3COM-HUAWEI-LLDP-EXT-MIB declaration in section 3 MIB Support & RFC Compliance
ii
References
1.
Introduction
In the tables describing the MIB objects to be supported, the columns means: Name - MIB object name Access - access as defined in MIB. PDS - whether the value always remains the same as the machine rebooting.(permanent data storage) Description - general comments
2.
statement
Whether the MIB listed on the document is supported or not depended on the description of it. If the description of the MIB node is not supported, it means the node is not supported by the product even the value of it can be got, the value will be ignored unless it makes problem. If the description of the node is As per MIB, it means the implement of the node is the same as the description of the MIB file. If the node has other description, it means the implement of it is different from the MIB file and the actual implement lies on the document. The MIB not listed in this document will be not supported totally, although the value of the node can be got or set. The meaning of the item access in the document is identical with the MAX-ACCESS in the MIB file. For example: if the MAX-ACCESS of a node in the MIB file is read-write, then the item access in the MIB Companion will be read-write , but if the node only support read in the product, then detailed information will be acquired in the item description of this node in this document
3.
RFC1213
MIB II
1.0
System and IP groups are supported. The following are partially supported: ifAdminStatus:read-write supported atTable: read-only supported ipDefaultTTL:read-only supported ipRouteTable:read-only supported ipNetToMediaTable:read-onl y supported tcpConnState :read-only supported EGP group: not supported. snmpMIB is fully supported. partially supported Fully supported. Fully supported. partially supported: snmpNotifyTable Fully supported.
Fully supported. Fully supported. 4 groups EtherStats, History, Alarms & Events on F1 The probe configuration group is supported to provide trap destination control. Only etherStatsHighCapacityGrou p and etherHistoryHighCapacityGro up are supported dot1dBase Group, dot1dBasePortTable & dot1dTp Group are fully supported The ifTable is supported. The tunnelIfTable is supported. Partially supported. Only support dot3StatsTable Partially supported Partially supported The following are partially supported :dot1qVlan Group dot1qVlanStaticTable dot1qVlanCurrentTable dot1qPortVlanTable dot1qTp Group dot1qTp Group Only entityPhysicalTable and entLogicalTable are supported at present. Not support read-create Not support read-create Partially supported Partially supported Partially supported, Not support sysORLastChange and sysORTable Fully supported. Fully supported. Partially supported.
RFC2021
1.0
RFC3273
1.0
RFC1493
Bridge MIB
1.0
Interfaces MIB IP Tunnel MIB MAU MIB EtherLike-mib Q-BRIDGE MIB P-BRIDGE MIB Bridge MIB Extensions
RFC2737
ENTITY-MIB
1.0
Fully supported. Partially supported. Partially supported. Partially supported. Partially supported.
A3com-hua wei-configman.mib A3com-hua wei-flash.m ib A3com-hua wei-sys-ma n.mib A3com-hua wei-splat-ig sp.mib A3com-hua wei-splat-d hcp.mib A3com-hua wei-dhcpr. mib A3com-hua wei-dhcps. mib A3com-hua wei-entity-e xt.mib hwLswMac Port A3com-hua wei-splat-in tf.mib A3com-hua wei-splat-q os.mib ACL MIB FTM MIB
Configuration management mib The flash management mib System management mib mibs for Igmp snooping mibs for dhcp client mibs for dhcp relay mibs for dhcp server Entity environment mib Mac address management Interface management QOS
1.0
Fully supported
1.0
Fully supported
1.0
Fully supported
1.0
Fully supported
1.0
Fully supported
1.0
Fully supported
1.0
Fully supported
1.0
Fully supported
1.0 1.0
1.0
Partially supported.
1.0 1.0
1.0
Fully supported
1.0
Fully supported
a3com-hua wei-user.mi b
Support for Bulk Configuration of user and access levels and trusted IP
1.0
Fully supported
4.
RFC1213 - MIB-II
Only the groups mentioned below are supported. All other MIB-II groups are not supported (udp, tcp, snmp).
SysUpTime SysContact
read-only Read-write
No Yes
Description 3Com Switch 5500G-EI 1.3.6.1.4.1.43.1.16.4.3.7 --- Jordan 1.3.6.1.4.1.43.1.16.4.3.8 --- Williams 1.3.6.1.4.1.43.1.16.4.3.18 ---Suzuka As per MIB The value can not be a blank string,and its first character can't be space. The set operation now only supports 1-200 characters. Using string 5500G-EI The set operation now only supports 1-30 characters. Space can not be included in the string assigned to this object The value can not be a blank string,and its first character can't be space. The set operation now only supports 1-200 characters. 78 (indicates that can provide the following sevices: datalink/subnetwork (e.g., bridges) internet (e.g., IP gateways) end-to-end (e.g., IP hosts) applications (e.g., mail relays) ) Not supported
SysName
Read-write
Yes
SysLocation
Read-write
Yes
SysServices
read-only
Yes
sysORLastCh ange
read-only
no
Ethernet 2/1/2
interface-type interface-num
Figure 2
Interface Index
In Interface index, frame(unit) is behind slot, just to inherit VRP former structure. In figure 2, port_num is calculated by VRP on base of interface name. Frame number range is from 1 to 8(for Monza ). Slot is a global board number on fabric wide, begins from 0. For port on unit1, the slot value in ifIndex is 0. And port on unit2, its slot in ifIndex is 1. Some interface, such as vlanif, loopback, null0, we call them logic interface. They exist on each unit of XRN. We define their unit number and slot number 0. But vlanif, loopback and null0 may have same slot and unit with physical ports located on unit 0, slot 0. So we give each type of interface an offset. This index is used in ifTable mib. In the interface name, there is no slot. There is just sub-slot. The topology of sub-slot called by H3C, 3COM call it slot. The are same. In fact, others dont need to care about this offset. Offsets just mean different logic interface is stored in different position. For example, index structure as fllowing: Slot(6bits)/unit(4bits)/position(19bits)/type(3bits) For logic interface, slot and unit are 0. Null0 position is 1. Inloopback0 is 2. The position of vlan interface will follow Inloopback0. It equals to vlanID(e.g. number 10 in Vlan-interface10) plus 2. We call number 2 offset. And The position of loopback interface follow the vlan-interface. So its position is max vlanID number plus loopback number, 1 and 2. The value of 3 bits type as following: 0: loopback 1: GigabyteEthernet
2: Ethernet 6: Other (reserved port type for future) 7: Vlan-interface Above definition is for product Monza, which have one CPU on one device. For some products, such as 7700, one device has multi slots and multi CPUs. Their interface name will be like ethernet2/2/0/1 if it supports XRN. There are slot and sub-slot in the interface name on the same time. For any product which doesnt support XRN function, its interface name will not have unit -id number. And the ifIndex is different from above definition. 4.2.2
ifTable mib
MIB Objects Access PDS Comments
ifIndex ifDescr
read-only read-only
Yes Yes
ifType
read-only
Yes
interface index, described as section 3.2.1 A textual string containing information about the interface. Here it is interface name, such as Aux0/0/0, null0, Vlan-interface2, ethernet1/0/1, Cascade 1/2/1, etc Interface type. Value list: inloopback0 is softwareLoopback(24), aux is ppp(23), null0 is other(1), M-Ethernet, Ethernet and Tengigabitethernet are ethernet-csmacd(6), GigabyteEthernet is 117 Vlan-interface is 136, Cascade port is 65534, etc. Null0 is an internal interface. If the routing entrys next hop is null0 interface, the packet which matchs this entry will be dropped. The size of the largest datagram which can be sent/received by interface in octets. This node is not supported for aux port An estimate of the interface's current bandwidth in bits per second. This node is not supported for aux port
ifMtu
read-only
Yes
ifSpeed
read-only
Yes
ifPhysAddress
read-only
Yes
MAC address The following type of interfaces support mac address: M-Ethernet(Management Ethernet) port Vlan interface Ethernet port Gigabit Ethernet port Other type of interfaces dont support mac address For F1, all vlan interfaces have the same mac address. Other interfaces have different mac address. This node is not supported for aux port enable or disable an interface This node is not supported for aux port,null0 port and loopback port. The value of testing(3) is not supported The current operational state (link status) of the interface. This node is not supported for aux port. The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. This node is not supported for aux port AS PER MIB This node is not supported for aux port AS PER MIB This node is not supported for aux port AS PER MIB This node is not supported for aux port AS PER MIB AS PER MIB. This node is not supported for aux port AS PER MIB This node is not supported for aux port AS PER MIB This node is not supported for aux port AS PER MIB This node is not supported for aux port AS PER MIB This node is not supported for aux port AS PER MIB This node is not supported for aux port AS PER MIB This node is not supported for aux port AS PER MIB This node is not supported for aux port Not supported.
ifAdminStatus
read- write
Yes
ifOperStatus
read-only
No
ifLastChange
read-only
No
ifInOctets ifInUcastPkts ifInNUcastPkts ifInDiscards ifInErrors ifInUnknownProt os ifOutOctets ifOutUcastPkts ifOutNUcastPkts ifOutDiscards ifOutErrors ifOutQLen ifSpecific
read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
No No No No No No No No No No No No No
F1 support 4 combo port pairs, the two ports in a pair share the same mac and only one can be used at the same time. The combo ports can be managed separately via the standard ifTable MIB with ifIndex. Administrator can disable/enable a port by setting the ifAdmin to specified status. The only limitation is, if you set the ifAdmin status to Up, then the comboed port will be set to Down automatically, and if you set the ifAdmin status to Down, the comboed port will be set to Up. The relataionship can be read from the A3Com-Huawei-Entrelation-MIB. 4.3 Address Translation Group(at) {mib-2.3}
This group is fully supported. 4.3.1 atTable:
Name atIfIndex
Access read-write
PDS Yes
atNetAddress atPhysAddress
read-write read-write
Yes Yes
Description Not surpport SET operation with index(s) . For the entry of static arp, the value of this object will be zero. Not surpport SET operation with index(s) Write just reference create static arp entries,but not support modify existing arp entries except atPhysAddress(not support modify indexes)..
4.4 IP Group
{mib-2.4}
Name ipForwarding
Access read-write
PDS Yes
ipDefaultTTL ipInReceives ipInHdrErrors ipInAddrErrors ipForwDatagrams ipInUnknownProto s ipInDiscards ipInDelivers ipOutRequests ipOutDiscards ipOutNoRoutes ipReasmTimeout ipReasmReqds ipReasmOKs
read-write read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
Yes No No No No No No No No No No No No No
Description Because the L3 switch can not be set to L2 mode via the MIB, so it is just a readable object The number may be set from 1to 255 As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
No No No No No
As per MIB As per MIB As per MIB As per MIB In our system ,the value of this node is same as ipOutNoRoutes
4.4.2
ipAddrTable:
Description As per MIB As per MIB As per MIB As per MIB As per MIB
Name ipRouteDest ipRouteIfIndex ipRouteMetric1 ipRouteMetric2 ipRouteMetric3 ipRouteMetric4 ipRouteNextHop ipRouteType ipRouteProto ipRouteAge ipRouteMask ipRouteMetric5 ipRouteInfo
Access read-write read-write read-write read-write read-write read-write read-write read-write read-only read-write read-write read-write read-only
PDS No No No No No No No No No No No No No
Description Not writable Not writable Not writable Not writable Not writable Not writable Not writable Not writable As per MIB Not writable Not writable Not writable As per MIB
MIB Objects tcpRtoAlgorithm tcpRtoMin tcpRtoMax tcpMaxConn tcpActiveOpens tcpPassiveOpens tcpAttemptFails tcpEstabResets tcpCurrEstab
Access read-only read-only read-only read-only read-only read-only read-only read-only read-only
PDS No No No No No No No No No
Comments As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
No No No No No
As per MIB As per MIB As per MIB As per MIB As per MIB
PDS No No No No No
Comments Not writable As per MIB As per MIB As per MIB As per MIB
PDS No No No No
PDS No No
4.7 snmp Group{mib-2.11} MIB Objects snmpInPkts snmpOutPkts snmpInBadVersions snmpInBadCommunityN ames snmpInBadCommunityU ses snmpInASNParseErrs snmpInTooBigs snmpInNoSuchNames Access read-only read-only read-only read-only read-only read-only read-only read-only PDS NO N/A N/A N/A N/A N/A Yes N/A Comments As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
snmpInBadValues snmpInReadOnlys snmpInGenErrs snmpInTotalReqVars snmpInTotalSetVars snmpInGetRequests snmpInGetNexts snmpInSetRequests snmpInGetResponses snmpInTraps snmpOutTooBigs
read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
snmpOutNoSuchNames snmpOutBadValues snmpOutGenErrs snmpOutGetRequests snmpOutGetNexts snmpOutSetRequests snmpOutGetResponses snmpOutTraps snmpEnableAuthenTrap s snmpSilentDrops snmpProxyDrops
read-only read-only read-only read-only read-only read-only read-only read-only read-write read-only read-only
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB NOT SUPPORT NOT SUPPORT If the size of the resultant message is bigger than a local constraint, the snmpOutTooBigs counter is incremented. As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB Default value is enabled(1) As per MIB As per MIB
Name ipNetToMediaIfIndex
Access read-write
PDS Yes
Description
Now just support read-only, if the
type of ipNetToMediaTyp e is static, the value of this index is 0. Now just support read-only Now just support read-only Now just support read-only
5.
ifMIB- RFC2233
Only support ifXTable.
5.1 ifXTable MIB Objects ifName ifInMulticastPkts ifInBroadcastPkts ifOutMulticastPkts ifOutBroadcastPkts ifHCInOctets ifHCInUcastPkts ifHCInMulticastPkts ifHCInBroadcastPkts ifHCOutOctets ifHCOutUcastPkts ifHCOutMulticastPkt s ifHCOutBroadcastPk ts ifLinkUpDownTrapE nable Access read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-write PDS No No No No No No No No No No No No No No Comments interface name, same as ifDescr in ifTable AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB Indicates whether linkUp/linkDown traps should be generated for this interface. AUX, Loopback and NULL interface are not support.. An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. This node is not supported for Vlan Interface, AUX port and ATM port Not supported This object has the value 'true(1)' if the interface sublayer has a physical connector and the value'false(2)' otherwise. This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. Default for each interface is xxxx Interface or null string. Xxxx is interface name. Just support read-only for aux port. not support
ifHighSpeed
read-only
No
ifPromiscuousMode ifConnectorPresent
read-write read-only
No No
ifAlias
read-write
Yes
ifCounterDiscontinuit yTime
read-only
No
6.
EtherLike-MIB-RFC2665
This mib describes generic objects for Ethernet-like network interfaces Only support dot3StatsTable.
6.1 dot3StatsTable MIB Objects Dot3StatsIndex Dot3StatsAlignmentErro rs Dot3StatsFCSErrors Dot3StatsSingleCollision Frames Dot3StatsMultipleCollisi onFrames Dot3StatsSQETestError s Dot3StatsDeferredTrans missions Dot3StatsLateCollisions Dot3StatsExcessiveColli sions Dot3StatsInternalMacTr ansmitErrors Dot3StatsCarrierSenseE rrors Dot3StatsFrameTooLon gs Dot3StatsInternalMacRe ceiveErrors Dot3StatsetherChipSet Dot3StatsSymbolErrors Dot3StatsDuplexStatus Access read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only PDS Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Comments AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB
7.
RFC1493 BRIDGE-MIB
7.1 dot1dBase
7.1.1 dot1dBaseBridgeAddress
Access read-only
PDS N/A
7.1.2
dot1dBaseNumPorts
MIB Objects
Access
PDS
Comments
dot1dBaseNumPorts
7.1.3 dot1dBaseType
read-only
N/A
As per MIB
Access read-only
PDS N/A
MIB Objects dot1dBasePort dot1dBasePortIfIndex dot1dBasePortCircuit dot1dBasePortDelayExc eededDiscards dot1dBasePortMtuExce ededDiscards 7.2 dot1dTp
7.2.1
Comments As per MIB As per MIB As per MIB As per MIB As per MIB
dot1dTpLearnedEntryDiscards
Access read-only
PDS N/A
Access read-write
PDS N/A
Because the fdb address is obtained from the driver which is developed by 3Com. Our device just retrieves information from driver and the fdb address already stored in memory. So we have not any more measurements to make the quering proceduce faster. Optimizing the driver module to implement a fast and reliable query may be a better way. Timelimit: maximum 3 seconds for get next response. MIB Objects Access PDS Comments
7.2.4
dot1dTpPortTable
MIB Objects
Access
PDS
Comments
As per MIB As per MIB Not Support Not Support Not Support
8.
dot1dPortCapabilitiesTable
Access read-only
PDS No
8.1.2
PDS No No
9.
Name snmpTrapOID
PDS No
snmpTrapEnt
No
As per MIB
for-notify V2 trap V2 trap V2 trap read/write No No No No As per MIB As per MIB As per MIB As per MIB
Description As per MIB As per MIB, The value of this node is the number of times that the SNMP engine has (re-)initialized itself since its initial configuration." As per MIB As per MIB
Read-only Read-only
No YES
the allocation of snmpEngineID The snmpEngineID has a length of 11 octets: The first four octets are set to the binary equivalent of the agent's SNMP management private enterprise number as assigned by the Internet Assigned Numbers Authority (IANA), and the very first bit is set to 1. For example, if Huawei Networks has been assigned enterprises 2011, the first four octets would be assigned '800007DB'H. The fifth octet is 3 indicates that the following is MAC address. The remaining six octets are the MAC address main board.
PDS No No No
PDS No No No
Name snmpTargetAddrN ame snmpTargetAddrT Domain snmpTargetAddrT Address snmpTargetAddrTi meout snmpTargetAddrR etryCount snmpTargetAddrT agList
Description As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB The string "TrapeHost" must be set when setting snmp trap destination The length of snmpTargetAddrParams is from 1 to 256
snmpTargetAddrP arams
Read-create
YES
Read-create Read-create
YES YES
snmpTargetParamsTable
Name snmpTargetParam sName snmpTargetParam sMPModel snmpTargetParam sSecurityModel snmpTargetParam sSecurityName snmpTargetParam sSecurityLevel snmpTargetParam sStorageType snmpTargetParam sRowStatus
The flowing is an example:
Description As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
***** SNMP QUERY STARTED ***** 1: snmpTargetSpinLock.0 (integer) 13736 2: [Loaded: SNMPv2-TM] snmpTargetAddrTDomain.116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46.55.54.4 6.55.54 (object identifier) snmpUDPDomain 3: snmpTargetAddrTAddress.116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46.55.54. 46.55.54 (octet string) A9.FE.4C.4C.00.A2 (hex) 4: snmpTargetAddrTimeout.116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46.55.54.4 6.55.54 (integer) 1500 5: snmpTargetAddrRetryCount.116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46.55.5 4.46.55.54 (integer) 3 6: snmpTargetAddrTagList.116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46.55.54.46. 55.54 (octet string) TrapeHost [54.72.61.70.65.48.6F.73.74 (hex)] 7: snmpTargetAddrParams.116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46.55.54.46 .55.54 (octet string) traphost.gl.169.254.76.76 [74.72.61.70.68.6F.73.74.2E.67.6C.2E.31.36.39.2E.32.35.34.2E.37.36.2E.37.36 (hex)] 8: snmpTargetAddrStorageType.116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46.55. 54.46.55.54 (integer) nonVolatile(3) 9: snmpTargetAddrRowStatus.116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46.55.54 .46.55.54 (integer) active(1)
10: snmpTargetParamsMPModel.116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46.55. 54.46.55.54 (integer) 0 11: snmpTargetParamsSecurityModel.116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46 .55.54.46.55.54 (integer) 1 12: snmpTargetParamsSecurityName.116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46 .55.54.46.55.54 (octet string) gl [67.6C (hex)] 13: snmpTargetParamsSecurityLevel.116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46. 55.54.46.55.54 (integer) noAuthNoPriv(1) 14: snmpTargetParamsStorageType.116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46. 55.54.46.55.54 (integer) nonVolatile(3) 15: snmpTargetParamsRowStatus.116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46.55 .54.46.55.54 (integer) active(1) 16: snmpUnavailableContexts.0 (counter) 0 17: snmpUnknownContexts.0 (counter) 0 ***** SNMP QUERY FINISHED ***** Above is a retrieve for SNMP TARGET entry. Here the index of this entry is 116.114.97.112.104.111.115.116.46.103.108.46.49.54.57.46.50.53.52.46.55.54.46.55.54, which is the hex code of string "traphost.gl.169.254.76.76" The first part, 116.114.97.112.104.111.115.116.46, is hex code of "traphost." string. The second part, 103.108.46, is ascii code of "gl.". The last part, 46.49.54.57.46.50.53.52.46.55.54.46.55.54, is hex code of "169.254.76.76".
Description As per MIB Only support read-only access Only support read-only access Only support read-only access
PDS No No No No
Name usmUserSpinLock
PDS No
Name usmUserEngineID usmUserName usmUserSecurityN ame usmUserCloneFro m usmUserAuthProt ocol usmUserAuthKey Change usmUserOwnAuth KeyChange usmUserPrivProto col usmUserPrivKeyC hange usmUserOwnPriv KeyChange usmUserPublic usmUserStorageT ype usmUserStatus
Access NA NA Read- only Read- create Read- create Read- create Read- create Read- create Read- create Read- create Read- create Read- create Read- create
Description As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
Name vacmContextNam e
PDS YES
PDS No No No No No
Description As per MIB As per MIB As per MIB As per MIB As per MIB
Name vacmAccessConte xtPrefix vacmAccessSecur ityModel vacmAccessSecur ityLevel vacmAccessConte xtMatch vacmAccessRead ViewName vacmAccessWrite ViewName vacmAccessNotify ViewName
Access not-accessib le not-accessib le not-accessib le Read- create Read- create Read- create Read- create
Description As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
No YES
{ vacmMIBViews.1}
Name vacmViewSpinLoc k
PDS NO
Name vacmViewTreeFa milyViewName vacmViewTreeFa milySubtree vacmViewTreeFa milyMask vacmViewTreeFa milyType vacmViewTreeFa milyStorageType vacmViewTreeFa milyStatus
Access not-accessib le not-accessib le Read- create Read- create Read- create Read- create
PDS No No No No No No
Description As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
PDS NO NO NO
ehterStatsOctets etherStatsPkts etherStatsBroadca stPkts etherStatsMulticas tPkts etherStatsCRCAlig nErrors etherStatsUndersi zePkts etherStatsOversiz ePkts etherStatsFragme nts etherStatsJabbers etherStatsCollision s etherStatsPkts64O ctets etherStatsPkts65t o127Octets etherStatsPkts128 to255Octets etherStatsPkts256 to511Octets etherStatsPkts512 to1023Octets etherStatsPkts102 4to1518Octets etherStatsOwner etherStatsStatus
10.1.2 History
Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-create Read-create
NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
10.1.2.1 historyControlTable: The maximum entries for the table are 100; The max buckets in historyControlTable are 10;
PDS NO NO
historyControlBuck etsRequested
Read-create
NO
Read- only
NO
NO NO NO
Our software only supports 10 buckets at maximum currently, If a value more than 10 is input, our software will return success, but the historyControlBucketGrante d will be assigned to 10 as for implementation. Our software only supports 10 buckets at maximum currently The value from 5 to 3600 is supported. As per MIB As per MIB
10.1.2.2 etherHistoryTable As the definition above, the maximum entries of the table are 1000( 100*10);
MIB Objects etherHistoryIndex etherHistorySampl eIndex etherHistoryInterv alStart etherHistoryDropE vents etherHistoryOctets etherHistoryPkts etherHistoryBroad castPkts etherHistoryMultic astPkts etherHistoryCRCA lignErrors etherHistoryUnder sizePkts etherHistoryOversi zePkts etherHistoryFragm ents etherHistoryJabbe rs etherHistoryCollisi ons etherHistoryUtilizat ion
Access Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only
PDS NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
Comments As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
10.1.3 Alarm 10.1.3.1 alarmTable The maximum entries for etherHistoryTable are 60;
PDS NO NO NO NO NO
NO NO NO NO NO NO NO
Comments As per MIB The range is from 5 to 65535 As per MIB As per MIB When the value of the alarmValue out of the range of alarmValue, the value of alarmValue will be a negativ. As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB when setting alarmStatus valid, the return value of success means that the setting operation is accepted by agent successfully. But it doesnt guarantee that the alarmStatus will change to valid. Only the entry of alarmTable meets the requirement of validation,alarmStatus will be valid after setting it.
10.1.4 Event 10.1.4.1 eventTable: The maximum entries for the table are 60; For every event, the maximum logs are 10;
PDS NO NO NO
eventCommunity
Read-create
NO
Not supported. When eventType is none(1) or log(2), the value of eventCommunity will not be saved; when eventType is snmptrap(3) or logandtrap(4), the value of eventCommunity will be saved but can take no effect. As per MIB As per MIB As per MIB
NO NO NO
PDS NO NO NO NO
PDS NO NO NO
etherStatsHighCapa cityOctets etherStatsHighCapa cityOverflowPkts64 Octets etherStatsHighCapa cityPkts64Octets etherStatsHighCapa cityOverflowPkts65t o127Octets etherStatsHighCapa cityPkts65to127Octe ts etherStatsHighCapa cityOverflowPkts128 to255Octets etherStatsHighCapa cityPkts128to255Oct ets etherStatsHighCapa cityOverflowPkts256 to511Octets etherStatsHighCapa cityPkts256to511Oct ets etherStatsHighCapa cityOverflowPkts512 to1023Octets etherStatsHighCapa cityPkts512to1023O ctets etherStatsHighCapa cityOverflowPkts102 4to1518Octets etherStatsHighCapa cityPkts1024to1518 Octets
Read-only Read-only
NO NO
Read-only Read-only
NO NO
Read-only
NO
As per MIB
Read-only
NO
As per MIB
Read-only
NO
As per MIB
Read-only
NO
As per MIB
Read-only
NO
As per MIB
Read-only
NO
As per MIB
Read-only
NO
As per MIB
Read-only
NO
As per MIB
Read-only
NO
As per MIB
10.3.3 etherHistoryHighCapacityTable
MIB Objects etherHistoryHighCa pacityOverflowPkts etherHistoryHighCa pacityPkts etherHistoryHighCa pacityOverflowOctet s etherHistoryHighCa pacityOctets
PDS NO NO NO
Read-only
NO
As per MIB
PDS No No No No No No
prialarmStartupAlar m prialarmRisingThres hold prialarmFallingThres hold prialarmRisingEventI ndex prialarmFallingEvent Index prialarmStatCycle prialarmStatType prialarmOwner prialarmStatus
No No No No No No No No No
Comments As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. When the value of the prialarmValue out of the range of prialarmValue,the value of prialarmValue will be a negative. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. when setting prialarmStatus valid, the return value of success means that the setting operation is accepted by agent successfully. But it doesnt guarantee that the prialarmStatus will change to valid. Only the entry of prialarmTable meets the requirement of validation, prialarmStatus will be valid after setting it.
read-cre ate read-cre ate read-cre ate read-cre ate read-cre ate
No No No No No
Only support read. The value is description of VLAN Not support. Not support. Not support. Not support.
11.1.2 dot1qVlanCurrentTable This table is not supported in F1 products 11.1.3 dot1qPortVlanTable This table augments dot1dBasePortTable.
Access read/write
PDS Yes
Read-only
Yes
Read-only read/write
Yes Yes
Comments this node not support set operation when the port type is access not supported set operation when the port is cascade port All set requests will return badValue error. Not support write operation As per mib dot1qGvrpStatus should be set before setting dot1qPortGvrpStatus, and the port type should be trunk.The QinQ function must not be enabled if supported when setting dot1qPortGvrpStatus.
read-only read-only
No No
PDS No Yes
12. RFC1850-OSPF
12.1 ospfGeneralGroup { ospf 1 } MIB Objects ospfRouterId ospfAdminStat ospfVersionNumber ospfAreaBdrRtrStatu s ospfASBdrRtrStatus ospfExternLsaCount ospfExternLsaCksu mSum ospfTOSSupport ospfOriginateNewLs as ospfRxNewLsas ospfExtLsdbLimit ospfMulticastExtensi ons Access read-write read-write read-only read-only read-write read-only read-only read-write read-only read-only read-write read-write PDS No No Yes No No No No No No No Yes Yes Comments not support the write access not support the write access. As per MIB As per MIB not support the write access As per MIB As per MIB not support the write access As per MIB As per MIB not support the write access not support the write access
read-write read-write
No No
not support the write access not support the write access
MIB Objects ospfAreaId ospfAuthType ospfImportAsExtern ospfSpfRuns ospfAreaBdrRtrCou nt ospfAsBdrRtrCount ospfAreaLsaCount ospfAreaLsaCksum Sum ospfAreaSummary ospfAreaStatus
Access read-only read-create read-create read-only read-only read-only read-only read-only read-create read-create
Comments As per MIB. Only support read-only access Only support read-only access As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. Only support read-only access Only support read-only access
Comments As per MIB. As per MIB. Only support read-only access Only support read-only access Only support read-only access
PDS No No
No No No No No No
As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB.
PDS No No No No No
Comments As per MIB. As per MIB. Only support read-only access Only support read-only access Only support read-only access
Comments Not support Not support Not support Not support Not support
Comments As per MIB. As per MIB. Only support read-only access Only support read-only access Only support read-only access Now support read-only.
ospfIfTransitDelay ospfIfRetransInterval ospfIfHelloInterval ospfIfRtrDeadInterva l ospfIfPollInterval ospfIfState ospfIfDesignatedRo uter ospfIfBackupDesign atedRouter ospfIfEvents ospfIfAuthKey ospfIfStatus ospfIfMulticastForwa rding ospfIfDemand ospfIfAuthType
read-create read-create read-create read-create read-create read-only read-only read-only read-only read-create read-create read-create read-create read-create
Now support read-only. Now support read-only. Now support read-only. Now support read-only. Now support read-only. As per MIB. As per MIB. As per MIB. As per MIB. Only support read-only access Only support read-only access Only support read-only access Only support read-only access Only support read-only access
Comments As per MIB. As per MIB. As per MIB. Now support read-only. Only support read-only access
Comments As per MIB. As per MIB. Only support read-only access Only support read-only access
Only support read-only access Only support read-only access As per MIB. As per MIB. Only support read-only access Only support read-only access Only support read-only access
12.10
12.10.1
MIB Objects ospfNbrIpAddr ospfNbrAddressLes sIndex ospfNbrRtrId ospfNbrOptions ospfNbrPriority ospfNbrState ospfNbrEvents ospfNbrLsRetransQ Len ospfNbmaNbrStatus ospfNbmaNbrPerma nence ospfNbrHelloSuppre ssed
Access read-only read-only read-only read-only read-create read-only read-only read-only read-create read-only read-only
PDS No Yes No No No No No No No No No
Comments As per MIB. As per MIB. As per MIB. As per MIB. Only support read-only access As per MIB. As per MIB. As per MIB. Only support read-only access As per MIB. As per MIB.
12.11
12.11.1
MIB Objects ospfVirtNbrArea ospfVirtNbrRtrId ospfVirtNbrIpAddr ospfVirtNbrOptions ospfVirtNbrState ospfVirtNbrEvents ospfVirtNbrLsRetran sQLen
PDS No No No No No No No
Comments As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB.
ospfVirtNbrHelloSup pressed
read-only
No
As per MIB.
12.12
12.12.1
MIB Objects ospfExtLsdbType ospfExtLsdbLsid ospfExtLsdbRouterI d ospfExtLsdbSequen ce ospfExtLsdbAge ospfExtLsdbChecks um ospfExtLsdbAdvertis ement
PDS No No No No No No No
Comments As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB.
12.13
12.13.1
MIB Objects ospfAreaAggregate AreaID ospfAreaAggregateL sdbType ospfAreaAggregate Net ospfAreaAggregate Mask ospfAreaAggregate Status ospfAreaAggregate Effect
Comments As per MIB. As per MIB. As per MIB. As per MIB. Only support read-only access Only support read-only access
PDS Yes No No No No
Comments As per MIB. As per MIB. As per MIB. As per MIB. Only support read-only access
MIB Objects rip2IfConfAddress rip2IfConfDomain rip2IfConfAuthType rip2IfConfAuthKey rip2IfConfSend rip2IfConfReceive rip2IfConfDefaultMet ric rip2IfConfStatus rip2IfConfSrcAddres s
Access read-only read-create read-create read-create read-create read-create read-create read-create read-create
Comments As per MIB. Only support read-only access Now support read-only. Now support read-only. Only support read-only access Only support read-only access Only support read-only access Now support read-only. Only support read-only access
MIB Objects rip2PeerAddress rip2PeerDomain rip2PeerLastUpdate rip2PeerVersion rip2PeerRcvBadPac kets rip2PeerRcvBadRou tes
PDS No No No No No No
Comments As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB.
not-access ible Read-crea d Read-crea d Read-crea d read-only Read-crea d read-only read-only read-only read-only read-only Read-crea d read-only Read-crea d Read-crea d
No No No
As per MIB Default value is 60 PLAT3 support RO only. Only support active(1), CeatAndGo(4),destroy(6). Value: 1 or 2 As per MIB Vaule: 10 to 250. The value should be a multiple of 10. Not supported As per MIB Not supported As per MIB As per MIB 0 represents no proxy; PLAT3 doesnt support As per MIB Value:2 to 5 Value:10 to 50. The value should be a multiple of 10.
igmpInterfaceVersion igmpInterfaceQuerier igmpInterfaceQueryMaxR esponseTime igmpInterfaceQuerierUpTi me igmpInterfaceQuerierExpir yTime igmpInterfaceVersion1Qu erierTimer igmpInterfaceWrongVersi onQueries IgmpInterfaceJoins igmpInterfaceProxyIfIndex igmpInterfaceGroups igmpInterfaceRobustness igmpInterfaceLastMembQ ueryIntvl
No No No No No No No No No No No No
15.2 igmpCacheTable
The igmpCacheTable contains information about multicast groups for which there are members on a particular interface.
Name
Access
PDS
Comments
not-access ible not-access ible Read-crea d read-only read-only read-only Read-crea d read-only
No No No No No No No No
As per MIB As per MIB Not supported yet As per MIB As per MIB As per MIB Not supported As per MIB
16. IP-FORWARD-MIB
16.1 Scalar objects
Name ipCidrRouteNumber Access read-only PDS No Description As per MIB
16.2 ipCidrRouteTable
Name ipCidrRouteDest ipCidrRouteMask ipCidrRouteTos ipCidrRouteNextHop ipCidrRouteIfIndex ipCidrRouteType Access read-only read-only read-only read-only read-create read-create PDS No No No No No No Description As per MIB As per MIB As per MIB As per MIB Only support read-only access Support three types: reject, remote and local, Only support read-only access. Support local, netmgmt, rip, ospf, is-is, bgp, other, Only support read-only access. Only support read-only access. Not support. Only support read-only access. Interior metric of this route, Only support read-only access. Not support. Not support. Not support. Not support.
No No No No No No No No No
ipCidrRouteStatus
read-create
No
17. IPV6-TCP-MIB
The MIB module for entities implementing TCP over IPv6..
17.2 ipv6TcpConnTable
Name
ipv6TcpConnLocalAddress ipv6TcpConnLocalPort ipv6TcpConnRemAddress ipv6TcpConnRemPort ipv6TcpConnIfIndex ipv6TcpConnState
Access
Not-accessible not-accessible not-accessible not-accessible not-accessible read-write
PDS
No No No No No No
Description
As per MIB As per MIB As per MIB As per MIB As per MIB Only support read operation
18. IPV6-UDP-MIB
The MIB module for entities implementing UDP over IPv6
18.2 ipv6UdpTable
Name
ipv6UdpLocalAddress ipv6UdpLocalPort ipv6UdpIfIndex
Access
Not-accessible not-accessible read-only
PDS
No No No
Description
As per MIB As per MIB As per MIB
19. IPV6-ICMP-MIB
The MIB module for entities implementing the ICMPv6.
19.2 ipv6IfIcmpTable
Name
ipv6IfIcmpInMsgs ipv6IfIcmpInErrors ipv6IfIcmpInDestUnreachs ipv6IfIcmpInAdminProhibs ipv6IfIcmpInTimeExcds ipv6IfIcmpInParmProblems ipv6IfIcmpInPktTooBigs ipv6IfIcmpInEchos
Access
read-only read-only read-only read-only read-only read-only read-only read-only
PDS
No No No No No No No No
Description
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
ipv6IfIcmpInEchoReplies ipv6IfIcmpInRouterSolicits ipv6IfIcmpInRouterAdvertisements ipv6IfIcmpInNeighborSolicits ipv6IfIcmpInNeighborAdvertiseme nts ipv6IfIcmpInRedirects ipv6IfIcmpInGroupMembQueries ipv6IfIcmpInGroupMembResponse s ipv6IfIcmpInGroupMembReduction s ipv6IfIcmpOutMsgs ipv6IfIcmpOutErrors ipv6IfIcmpOutDestUnreachs ipv6IfIcmpOutAdminProhibs ipv6IfIcmpOutTimeExcds ipv6IfIcmpOutParmProblems ipv6IfIcmpOutPktTooBigs ipv6IfIcmpOutEchos ipv6IfIcmpOutEchoReplies ipv6IfIcmpOutRouterSolicits ipv6IfIcmpOutRouterAdvertisemen ts ipv6IfIcmpOutNeighborSolicits ipv6IfIcmpOutNeighborAdvertisem ents ipv6IfIcmpOutRedirects ipv6IfIcmpOutGroupMembQueries ipv6IfIcmpOutGroupMembRespon ses ipv6IfIcmpOutGroupMembReducti ons
read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
No No No No No No No No No No No No No No No No No No No No No No No No No No
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
20. IPV6-MIB
The MIB module for entities implementing the IPv6 protocol.
Access
read-write read-write read-only read-only
PDS
Current Current Current Current
Description
Only support read operation Only support read operation As per MIB Not supported. The value is always 0 days 00h:00m:00s.00th (0).
20.2 ipv6IfTable
Name
ipv6IfIndex ipv6IfDescr ipv6IfLowerLayer ipv6IfEffectiveMtu
Access
not-accessible read-write read-only read-only
PDS
No No No No
Description
As per MIB Only support read operation Not supported The value is always : ccitt As per MIB
Not supported. The value is always 65535 Only support read operation Only support read operation As per MIB Only support read operation As per MIB As per MIB
20.3 ipv6IfStatsTable
Name
ipv6IfStatsInReceives ipv6IfStatsInHdrErrors ipv6IfStatsInTooBigErrors ipv6IfStatsInNoRoutes ipv6IfStatsInAddrErrors ipv6IfStatsInUnknownProtos ipv6IfStatsInTruncatedPkts ipv6IfStatsInDiscards ipv6IfStatsInDelivers ipv6IfStatsOutForwDatagrams ipv6IfStatsOutRequests ipv6IfStatsOutDiscards ipv6IfStatsOutFragOKs ipv6IfStatsOutFragFails ipv6IfStatsOutFragCreates ipv6IfStatsReasmReqds ipv6IfStatsReasmOKs ipv6IfStatsReasmFails ipv6IfStatsInMcastPkts ipv6IfStatsOutMcastPkts
Access
read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
PDS
No No No No No No No No No No No No No No No No No No No No
Description
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
20.4 ipv6AddrPrefixTable
Name
ipv6AddrPrefix ipv6AddrPrefixLength ipv6AddrPrefixOnLinkFlag ipv6AddrPrefixAutonomousFlag ipv6AddrPrefixAdvPreferredLifeti me ipv6AddrPrefixAdvValidLifetime
Access
not-accessible not-accessible read-only read-only read-only read-only
PDS
Current Current No No No No
Description
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
20.5 ipv6AddrTable
Name
ipv6AddrAddress ipv6AddrPfxLength ipv6AddrType ipv6AddrAnycastFlag ipv6AddrStatus
Access
not-accessible read-only read-only read-only read-only
PDS
Current Current Current No No
Description
As per MIB As per MIB As per MIB As per MIB As per MIB
Access
read-only read-only
PDS
No No
Description
As per MIB As per MIB
20.7 ipv6RouteTable
Name
ipv6RouteDest ipv6RoutePfxLength ipv6RouteIndex ipv6RouteIfIndex ipv6RouteNextHop ipv6RouteType ipv6RouteProtocol ipv6RoutePolicy ipv6RouteAge ipv6RouteNextHopRDI ipv6RouteMetric
Access
not-accessible not-accessible not-accessible read-only read-only read-only read-only read-only read-only read-only read-only
PDS
No No No No No Current Current Current Current No Current
Description
As per MIB As per MIB Not supported. No return value As per MIB As per MIB As per MIB Not supported. The value is always 1 Not supported. The value is always 0. Not supported. The value is always 0. Not supported. The value is always 0. Not supported. The value is always 4294967295. Not supported. The value is always 0. Not supported. The value is always OBJECT ID 0 0. As per MIB
No No No
20.8 ipv6NetToMediaTable
Name
ipv6NetToMediaNetAddress ipv6NetToMediaPhysAddress ipv6NetToMediaType ipv6IfNetToMediaState ipv6IfNetToMediaLastUpdated ipv6NetToMediaValid
Access
not-accessible read-only read-only read-only read-only read-write
PDS
Current Current Current Current No Current
Description
As per MIB As per MIB As per MIB As per MIB As per MIB Only support read operation
21.1 H3cFlashDevice
Flash device mamagement group (h3cFlashManMIBObjects.1) 21.1.1 H3cFlhSupportNum: The number of flash supported by system.
Access Read-only
PDS No
Access Read-only
PDS No
h3cFlhSize h3cFlhPos h3cFlhName h3cFlhChipNum h3cFlhDescr h3cFlhInitTime h3cFlhRemovable h3cFlhPartitionBool h3cFlhMinPartitionSi ze h3cFlhMaxPartitions h3cFlhPartitionNum
Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-wirte Read-only Read-only Read-only
No No No No No No No No No No No
Comments The index of h3cFlashTable. It have the minimum vaule of 1, for XRN device, the maximum value is related with the maximum unit number that system supported. As per MIB Not Support The name for flash, described as follows: As per MIB As per MIB As per MIB As per MIB The value is always False for F1 The value is same as h3cFlhSize for F1. The value is always 1 for F1 The value is always 1 for F1
h3cFlhName named as follows: flash: h3cFlhPos: If the entiy-mib is not implemented, the value for h3cFlhPos is the unit ID in XRN device.
21.1.3 h3cFlashChips:The information for each chip in a flash(h3cFlashManMIBObjects.2) h3cFlhChipTable: This table is indexed by h3cFlhIndex and h3cFlhChipSerialNo. Each flash may contains several chips, this table provides the information of each chip in a flash. 21.1.3.1 h3cFlhChipTable
PDS No No No
No No No No
h3cFlashPartitions: Flash partition information and files information in the partition. For a given flash indexed by h3cFlhIndex, if it cannot be partitioned, there is only one instance in this table. 21.1.3.2 h3cFlhPartitionTable
MIB Objects h3cFlhPartIndex h3cFlhPartFirstChip h3cFlhPartLastChip h3cFlhPartSpace h3cFlhPartSpaceFree h3cFlhPartFileNum h3cFlhPartChecksum Method h3cFlhPartStatus h3cFlhPartUpgradeMo de h3cFlhPartName h3cFlhPartRequireEra se h3cFlhPartFileNameL en
Access NA Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only Read-only
PDS No No No No No No No No No No No No
Comments As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
The table contains the files in a given partition of a flash, including the hidden files. 21.1.3.3 huaweiFlhFileTable
PDS No No No No No
Comments As per MIB As per MIB As per MIB As per MIB As per MIB
21.2 h3cFlashOperate
This MIB describles the operation in flash group. (h3cFlashManMIBObjects.2) The operation types supported by device are:
net2FlashWithErase (1): Copy a file to flash; erase flash before copy. Use the FTP or TFTP protocol. net2FlashWithoutErase (2): Copy a file to flash; do not erase. Note that this command will fail if the PartitionNeedErasure object specifies that the partition being copied to needs erasure. Use the FTP or TFTP protocol. flash2Net (3): Copy a file from flash using the FTP or TFTP protocol. Delete (4): Delete the file specified by h3cFlhOperSourceFile. If the operation is implemented, the file will be deleted from flash completely.
NOTE: To copy a file from (to) flash to (from) the network, the device is regarded as FTP(TFTP) client, and the remote NMS serves as FTP(TFTP) server. To create an instance in the table, CreatAndGo and CreateAndWait operations are available. When ftp is used to transmit file, the values for h3cFlhOperServerUser and h3cFlhOperPassword must be specified. The following values of H3cFlashOperationStatus are implemented for tftp protocol: 1: opInProgress(1) 2: opSuccess(2) 3: opInvalid(3) 4: opInvalidProtocol(4) 5: opInvalidSourceName(5) 7: opInvalidServerAddress(7) 10: opDeviceError(10) 12: opDeviceFull(12) 13: opFileOpenError(13) 14: opFileTransferError(14) 16: opNoMemory(16) 17: opAuthFail(17) 19: opUnknownFailure(19) The following values of H3cFlashOperationStatus are implemented for ftp protocol: 1: opInProgress(1) 2: opSuccess(2) 3: opInvalidOperation(3) 4: opInvalidProtocol(4) 5: opInvalidSourceName(5) 7: opInvalidServerAddress(7) 10: opDeviceError(10) 12: opDeviceFull(12) 13: opFileOpenError(13)
14: opFileTransferError(14) 16: opNoMemory(16) 17: opAuthFail(17) 19: opUnknownFailure(19) The following values of H3cFlashOperationStatus are implemented for delete operation: 1: opInProgress(1) 2: opSuccess(2) 20:opDeleteFileOpenError(20), 21:opDeleteInvalidDevice(21), 22:opDeleteInvalidFunction(22), 23:opDeleteOperationError(23), 24:opDeleteInvalidFileName(24), 25:opDeleteDeviceBusy(25), 26:opDeleteParaError(26), 27:opDeleteInvalidPath(27) 21.2.1 h3cFlhOpTable
NOTE:This table must be set before walk, or it will be empty.
PDS No No No No No No No
Comments As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB Its value range is 1 to 91 for pure file name, and 1 to 127 for full file name with path and device name. When the file is located on flash, the file name cannot contain space, else the operation will be failed. Default value is the same as that of h3cFlhOperSourceFile. If the path for file is not specified, the default path of root of flash is used. When the file is located on flash, the file name cannot contain space, else the operation will be failed. As per MIB As per MIB. Default value is
h3cFlhOperDestinationF ile
Read-create
No
h3cFlhOperStatus h3cFlhOperEndNotificati
Read-only Read-create
No No
on h3cFlhOperProgress h3cFlhOperRowStatus
Read-only Read-create
No No
false As per MIB As per MIB. All the status are supported.
Note that the algorithm for h3cFlhOperIndex is as the follows: There are two parts for a given h3cFlhOperIndex. The part of first two bytes (from left) is the entity index of unit which is defined in entity MIB (RFC2737). The remaining part of h3cFlhOperIndex is the flash index in a unit. For example, the first flash in the unit1 which has the entity index of 2 may be defined as 131073(0x20001). If entity index part of h3cFlhOperIndex is the entity index of fabric, it means that the operation is for master unit in the fabric. Other values except for the entity index of unit and fabric, and zero are invalid.
22. A3COM-HUAWEI-CONFIG-MAN-MIB
A configuration management MIB, includes configuration log management and Backup & Restore operation of configuration. All the configuration change events can be managed by the log management mib. The configuration may be changed by CLI, SNMP or other ways defined as the MIB. Backup & Restore mib group provides the configuration backup and restore among flash, memory and network. Note: Writing flash can be done by Backup (save) as described in figure 16-1. The object of hwWriteConfig is replaced by this mib.
h Mem
kup(ftp/tftp) tore Res kup(save) Ima Bac ory Net kup(ftp/tftp) Bac tore(ftp/tftp) Bac Figure 16-1 work Res tore(ftp/tftp) Res
PDS No No No Yes
h3cCfgLogDeletedEntrie s h3cCfgLogWantBackup
No No
Comments As per MIB As per MIB As per MIB The object shows the maximum number of rows in h3cCfgLogTable. The value supported by the system is 10, and For XRN Devices the vaule is 10 for each unit As per MIB Available for distributed systems. Always false value for a centralized system.
22.1.2 h3cCfgLogTable
All the events of configuration change triggered by SNMP agent will be recorded in the table. But only five command-line events can be recorded, these events include entering system view, saving current configuration, resetting saved-configuration, renaming current startup configuration file and overwriting current startup configuration file by copy command MIB Objects h3cCfgLogIndex h3cCfgLogTime h3cCfgLogSrcCmd h3cCfgLogSrcData h3cCfgLogDesData h3cCfgLogTerminalType h3cCfgLogTerminalUser Access NA read-only read-only read-only read-only read-only read-only PDS No No No No No No No Comments As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB When users modify configuration through SNMP agent, the value of this instance is the name of the write community. As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
No No No No No No No
Access read-only
PDS Yes
read-write read-only
Yes Yes
Comments The object shows the maximum number of rows in h3cCfgOperateTable. The value supported by the system is 5, and For XRN Devices the vaule is 5 for each unit As per MIB The object shows the maximum number of rows in h3cCfgOperateResultTabl e. The value can be modified. For XRN system, each unit have a h3cCfgOperateResultTabl e, the maximum number of rows in this table is no more than the value of h3cCfgOperateResultGlob alEntryLimit.
22.2.2 h3cCfgOperateTable
Access NA read-create
PDS No No
h3cCfgOperateProtocol
read-create
No
Comments As per MIB net2running operation will only act on the whole fabric. If the index doest indicate to the whole fabric, error will be return. As per MIB
MIB Objects
h3cCfgOperateFileName
Access
read-create
PDS
No
Comments The value must be specified when h3cCfgOperateType is Net2Startup, Net2Running or Running2Net . When h3cCfgOperateType is Net2Startup or Net2Running , this node specify the source file name of transfers, directory is supported in the filename. When h3cCfgOperateType is Running2Net , this node specify the destination file name of transfers. When h3cCfgOperateType is Startup2Net ,the object may not be created instead of using the file name of startup configuration file. Generally the maximum length of the file name is 116. The value may include the file path if applicable. When the h3cCfgOperateType is Running2Startup, the maximum length of pure file name should not exceed 56 in order to be consistent with save command. With the path flash:/, the maximum length of complete file name will be 63. When the h3cCfgOperateType is Net2Startup, if the maximum length of pure file name exceeds 64, the MIB operation will success but the file cant be set as next startup configuration file. As per MIB As per MIB As per MIB As per MIB. Default value is false As per MIB. All the status are supported.
No No No No No
Note that the algorithm for h3cCfgOperateIndex is as the follows: There are two parts for a given h3cCfgOperateIndex. The part of first two bytes (from left) is the entity index of unit which is defined in entity MIB (RFC2737). The remaining part of h3cCfgOperateIndex is the operation index in a unit. For example, the first operation in the unit1 which has the entity index of 2 may be defined as 131073(0x20001). If entity index part of h3cCfgOperateIndex is zero or the entity index of fabric, it means that the operation is for all the units in the fabric. Other values except for the entity index of unit and fabric, and zero are invalid. When executing a Backup operation in firbric, the remote filenames will be extended _UnitID as a suffix, and UnitID is from the device where the configuration file generated. The other way round, when a firbric Restore operation occurring, the algorithm makes an exact remote file restore to the only device depend on the suffix of _UnitID.
22.2.3 h3cCfgOperateResultTable
PDS No No No No No No
Comments As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
Comments As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
PDS No No
h3cSysReloadTag
Read- write
No
Comments If the reload action is done,the value will be 0 the set operation is used to set the reload status. The success of set operation of this object does not mean the reload action will succeed, If the reload action is done,the value will be reloadUnavailable As per MIB
Adding an instance to h3cSysReloadScheduleTable does not mean that it can be reloaded at once. It is required to specify the value of h3cSysReloadAction, and h3cSysReloadSchedule or h3cSysReloadTag to perform the reload action. To reboot a device,firstly you must give the value of h3cSysReloadSchedule or h3cSysReloadTag. And then write h3cSysReloadAction. The object of h3cSysReloadSchedule is used to reload a specified entity, such as a unit. If multiple units are to be reloaded, h3cSysReloadTag should be used. h3cSysReloadTag is a tag which can map several entities in the h3cSysReloadScheduleTable by using h3cSysReloadTagList object. 23.2.2 h3cSysReloadScheduleTable
PDS No No No
PDS No
No No No
h3cSysReloadRowStatus
NOTE:
Read- create
No
Comments when the value is 0 , its means that there is no iamge file for next reboot and its forbidden to reboot. So if you want to reboot certain unit, you must check the value of h3cSysReloadImage First. In each unit, h3cSysReloadImage must be one of value of h3cSysImageIndex in h3cSysImageTable corresponding. As per MIB As per MIB If the value of h3cSysReloadSchedule is not 0, the h3cSysReloadTagList will be ignored, As per MIB
h3cSysReloadEntity: The value of this object is the entity index which depends on the implementation of ENTITY-MIB. If there is no ENTITY-MIB, the value for this object is the unit ID for XRN devices or 0 for non-XRN device. h3cSysReloadRowStatus: CreatAndGo and CreatAndWait operations are supported.
Access Read-only
PDS Yes
23.3.2 h3cSysImageTable
Access Read-write
PDS Yes
Comments For F1,only support main,backup, none, If set main to backup or backup to main, it will be main attribute.
The value for h3cSysImageIndex is divided two parts as follow: 31 ity index 0 ge file index 31
15 Ent For F1 products, the entity index is the entPhysicalIndex of Unit as defined in the entPhysicalTable. Other values are invalid.
Access Read-only
PDS Yes
Con For F1 products, the entity index is the entPhysicalIndex of Unit as defined in the entPhysicalTable. Other values are invalid.
23.5.1 h3cSysCurTable
Comments As per MIB As per MIB As per MIB As per mib As per mib
Access
PDS
Description
No No No No No No
As per mib As per mib As per mib As per mib As per mib As per mib
(The terms listed below are just used in the range of this section.) BootRom: a special program which is used to boot the system on system startup. BOOT ROM: a specific zone in system in which a BootRom is stored. Bootrom file: a file which exists in file system. The content of such file is BootRom. Function
The responsibility of this table is to update BootRom from a BootRom file in file system to BOOT ROM. It assumes that the source Bootrom file already exists in the file system of the device before doing operation. On system startup, this table is empty. Notes
1) Be careful that the operation on BOOT ROM updating is risky. Other operations may halt during updating BOOT ROM. Such operation may take a long time as well. 2) The value of h3cSysCurUpdateBtmFileName will not be updated until updating operation completed. 3) The value of h3cSysBtmLoadIndex is divided into two parts as follows:
The entityIndex is the same as entPhysicalIndex as defined in the entPhysicalTable, and must be the entPhysicalIndex of the entity whose entPhysicalClass is chassis. The randomIndex is determined by users. Algorithm of h3cSysBtmLoadIndex: h3cSysBtmLoadIndex = (entityIndex << 16) | randomIndex 4) It is strongly recommended that the name of a Bootrom file ends with .btm, but this table will not check whether a Bootrom file ends with .btm. The verification of validity of a Bootrom file will be performed after the h3cSysBtmRowStatus of this instance turns into active. 5) If h3cSysBtmFileName of the instance includes a path, that path must refer to the same device identified by entityIndex part of h3cSysBtmLoadIndex of the instance. If h3cSysBtmFileName includes just a filename without a path, the root directory will be used internally. 6) At present, h3cSysBtmFileType must be set to main. 7) All necessary objects, which are h3cSysBtmFileName and h3cSysBtmFileType, should be provided with h3cSysBtmRowStatus simultaneously in creation. 8) h3cSysBtmErrorStatus can be used to get current progress or result of the updating operation. At any time, there is only one instance of which the h3cSysBtmErrorStatus is inProgress in the same device. Creating a new instance will fall into fail if there is an instance of which h3cSysBtmErrorStatus is inProcess. 9) If there is an attempt to remove the instance of which the h3cSysBtmErrorStatus is inProgress, such attempt may fail. The Boot Rom in BOOT ROM can not be removed through h3cSysBtmLoadTable, but it can be updated through this table. When removing an instance from this table, there is no any deletion of the corresponding file in file system. After updating a Bootrom file into BOOT ROM, the corresponding file can be removed from the file system, but it is not the responsibility of this table to remove a Bootrom file from the file system. Examples Creating a new instance. A valid Bootrom file named with s4e01_06.btm is supposed existing in file system. The entPhysicalIndex of the entity (the entPhysicalClass of this entity is chassis) is 2 (Here the value 2 is used just as illustration, the actual value must be got from entPhysicalIndex in entPhysicalTable of ENTITY-MIB), the customized randomIndex is 1. Then the value of h3cSysBtmLoadIndex is 131073, and the value of the necessary objects should be set to: h3cSysBtmFileName.131073 = s4e01_06.btm h3cSysBtmFileType.131073 = main h3cSysBtmRowStatus.131073 = createAndGo
24. A3COM-HUAWEI-LswIGSP-MIB
24.1 hwLswIgmpsnoopingMib { lswCommon 7 }
24.1.1 hwLswIgmpsnoopingMibObject { hwLswIgmpsnoopingMib 1 }
Comments The default setting is disabled The default value is 105 seconds The default value is 10 seconds The default value is 260 seconds
25. A3COM-HUAWEI-LswDHCP-MIB
25.1 hwLswDhcpMib { lswCommon 8 }
25.1.1 hwLswDhcpMibObject { hwLswDhcpMib 1 }
Comments As per MIB. As per MIB. As per MIB. Only support createAndGo and destroy.
Comments As per MIB. As per MIB. As per MIB. Only support createAndGo and destroy.
hwDhcpToL3RowStatus
read-create
Yes
26. A3COM-HUAWEI-DHCPR-MIB
This mib is for router not lanswitch so it is not supported on F1 products.
MIB Objects dot3adAggIndex dot3adAggMACAddress dot3adAggActorSystemPriority dot3adAggActorSystemID dot3adAggAggregateOrIndividu al dot3adAggActorAdminKey dot3adAggActorOperKey dot3adAggPartnerSystemID dot3adAggPartnerSystemPriorit y dot3adAggPartnerOperKey dot3adAggCollectorMaxDelay
Access n/a read-only read- write read-only read-only read- write read-only read-only read-only read-only read- write
Comments As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. Write operation is ignored by agent As per MIB. As per MIB. As per MIB. As per MIB. As per MIB.(write operation is ignored by agent, and read operation returns 0)
27.1.1.2 dot3adAggPortListTable
Access read-only
PDS No
Access n/a
PDS No
yes No yes no
As per MIB. As per MIB. As per MIB. As per MIB.(Write operation ignored by agent ) As per MIB.(Write operation ignored by agent) As per MIB. As per MIB.(Write operation ignored by agent) As per MIB. As per MIB.(Write operation ignored by agent) As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB.(Write operation ignored by agent) As per MIB. As per MIB.(Write operation ignored by agent ) As per MIB. As per MIB.(Write operation ignored by agent) As per MIB. As per MIB.(Write operation ignored by agent) As per MIB. As per MIB.
dot3adAggPortPartnerAdminSy stemPriority dot3adAggPortPartnerOperSyst emPriority dot3adAggPortPartnerAdminSy stemID dot3adAggPortPartnerOperSyst emID dot3adAggPortPartnerAdminKe y dot3adAggPortPartnerOperKey dot3adAggPortSelectedAggID dot3adAggPortAttachedAggID dot3adAggPortActorPort dot3adAggPortActorPortPriority dot3adAggPortPartnerAdminPor t dot3adAggPortPartnerOperPort dot3adAggPortPartnerAdminPor tPriority dot3adAggPortPartnerOperPort Priority dot3adAggPortActorAdminState
read-write
yes
read-only read-write
No yes
read-only read-write
No yes
No No No No yes yes
read-only read-write
No yes
read-only read-write
No yes
read-only read-write
No yes
read-only read-only
No No
MIB Objects
Access
PDS
Comments
dot3adAggPortStatsLACPDUsR x dot3adAggPortStatsMarkerPDU sRx dot3adAggPortStatsMarkerResp onsePDUsRx dot3adAggPortStatsUnknownRx dot3adAggPortStatsIllegalRx dot3adAggPortStatsLACPDUsT x dot3adAggPortStatsMarkerPDU sTx dot3adAggPortStatsMarkerResp onsePDUsTx
27.1.3.2 dot3adAggPortDebugTable
No No No No No No No No
As per MIB. 0 is returned at present 0 is returned at present. 0 is returned at present. As per MIB. As per MIB. 0 is returned at present. 0 is returned at present.
MIB Objects dot3adAggPortDebugRxState dot3adAggPortDebugLastRxTime dot3adAggPortDebugMuxState dot3adAggPortDebugMuxReason dot3adAggPortDebugActorChurn State dot3adAggPortDebugPartnerChur nState dot3adAggPortDebugActorChurn Count dot3adAggPortDebugPartnerChur nCount dot3adAggPortDebugActorSyncTr ansitionCount dot3adAggPortDebugPartnerSync TransitionCount dot3adAggPortDebugActorChang eCount dot3adAggPortDebugPartnerCha ngeCount
27.1.4 dot3adTablesLastChanged 27.1.4.1 dot3adAggPortListTable
Access read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
PDS No No No No No No No No No No No No
Comments As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. not supported not supported. As per MIB. As per MIB.
Name dot3adTablesLastChanged
Access read-only
PDS No
27.2 A3COM-HUAWEI-LAG-MIB
27.2.1 hwAggLinkTable
hwAggLinkPortList
read- create
yes
hwAggLinkState
read- create
yes
hwAggPortListSelectedPorts
read-only
No
hwAggPortListSamePartnerPorts
read-only
No
Comments Aggregated link number. Aggregated link Description. Type of aggregation. 1 => Manual aggregation, no LACP 2 => Membership specified by user, LACP is used to validate 3 => Completely dynamic aggregation detected by LACP. hwAggLinkMode and hwAggLinkState must be set together List of ports in this AL, by bridge port number. If the type is manual or static, you can update this list to your hearts content. If, however, the AL is dynamic, then the system will maintain it.You are NOT permitted to set the value of this to all zeroes. RowStatus. 1 is returned in read operation, and hwAggLinkMode and hwAggLinkState must be set together A PortList of physical ports that have selected to this aggregator, but which have not yet attached.. PortList of physical ports that the same Actor SystemID and partner systemID as this aggregator,but have differing actor and partner keys.
Access n/a
PDS No
hwAggPortNotAttachedReason
read-write
No
hwAggPortLacpState
read-write
YES
reason why this port is selected for an aggregatorbut not attached,-- 1 - all active ports are already.in-use for this aggregator.-- 2 - all aggregation resources are already in-use.-- 3 - the port's configuration is not appropriate. -- 4 - the port's partner is not appropriate. Write operation is ignored by agent Control lacp enble or disable the reason string why this port is selected for an aggregator but not attached. Write operation is ignored by agent
hwAggPortNotAttachedString
Read-write
No
Name hwAggResourceAllocationValue
Access read-only
PDS No
Description The priority value calculated to decide which aggregations have first call on the load-sharing aggregation resources in the hardware
28. IEEE8021D-STP-MIB
28.1 dot1dStpPortTable MIB Objects dot1dStpPort dot1dStpPortPriority dot1dStpPortState dot1dStpPortEnable dot1dStpPortPathCost Access read-only read-write read-only read-write read-write PDS No Yes No Yes Yes Comments As per MIB. As per MIB. As per MIB. As per MIB. The Object can not be supported in MSTP. Not support dot1t pathcost-standard As per MIB. As per MIB. As per MIB. As per MIB. As per MIB.
No No No No No
28.2 dot1dStpGlobalTable MIB Objects dot1dBaseBridgeAddress dot1dStpProtocolSpecification dot1dStpPriority Access read-only read-only read-write read-only PDS No No Yes No Comments As per MIB. As per MIB. As per MIB. The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. The total number of topology changes detected by this bridge since the management entity was last reset or initialized.A constant vlan zero is returned As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB.
dot1dStpTimeSinceTopologyChange
read-only
No
dot1dStpTopChanges
dot1dStpDesignatedRoot dot1dStpRootCost dot1dStpRootPort dot1dStpMaxAge dot1dStpHelloTime dot1dStpHoldTime dot1dStpForwardDelay dot1dStpBridgeMaxAge dot1dStpBridgeHelloTime dot1dStpBridgeForwardDelay
read-only read-only read-only read-only read-only read-only read-only read-write read-write read-write
29. A3COM-HUAWEI-LswMSTP-MIB
29.1 Scalar objects
Name hwdot1sStpStatus hwdot1sStpForceVersion hwdot1sStpDiameter hwdot1sMstBridgeMaxHops hwdot1sMstMasterBridgeID hwdot1sMstMasterPathCost hwdot1sMstBpduGuard hwdot1sMstAdminFormatSelec tor hwdot1sMstAdminRegionNam e hwdot1sMstAdminRevisionLev el hwdot1sMstOperFormatSelect Access read-write read-write read-write read-write read-only read-only read-write read-write read-write read-write read-only PDS Yes Yes Yes Yes No No Yes No No No No Description As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
Yes Yes No No No No
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
29.2 hwdot1sVIDAllocationTable
Name hwdot1sMstVID hwdot1sAdminMstID hwdot1sOperMstID Access read-only read-write read-only PDS Yes No Yes Description As per MIB need confirm by product As per MIB
29.3 hwdot1sInstanceTable
Name hwdot1sInstanceID hwdot1sMstiBridgeID hwdot1sMstiBridgePriority hwdot1sMstiDesignedRoot hwdot1sMstiRootPathCost hwdot1sMstiRootPort hwdot1sMstiRootType hwdot1sMstiRemainingHops hwdot1sMstiAdminMappedVla nListLow hwdot1sMstiAdminMappedVla nListHigh hwdot1sMstiOperMappedVlan ListLow hwdot1sMstiOperMappedVlan ListHigh Access read-only read-only read-write read-only read-only read-only read-write read-only read-only read-only read-only read-only PDS Yes No Yes No No No Yes No No No Yes Yes Description As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
29.4 hwdot1sPortTable
Name hwdot1sMstiPortIndex hwdot1sMstiState hwdot1sMstiPortPriority hwdot1sMstiPathCost hwdot1sMstiDesignatedRoot hwdot1sMstiDesignatedCost hwdot1sMstiDesignatedBridge hwdot1sMstiDesignatedPort hwdot1sMstiMasterBridgeID hwdot1sMstiMasterPortCost Access read-only read-only read-write read-write read-only read-only read-only read-only read-only read-only PDS No No Yes Yes No No No No No No Description As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
hwdot1sMstiStpPortEdgeport hwdot1sMstiStpPortPointToPoi nt hwdot1sMstiStpMcheck hwdot1sMstiStpTransLimit hwdot1sMstiStpRXStpBPDU hwdot1sMstiStpTXStpBPDU hwdot1sMstiStpRXTCNBPDU hwdot1sMstiStpTXTCNBPDU hwdot1sMstiStpRXRSTPBPDU hwdot1sMstiStpTXRSTPBPDU hwdot1sMstiStpRXMSTPBPD U hwdot1sMstiStpTXMSTPBPDU hwdot1sMstiStpClearStatistics hwdot1sMstiStpDefaultPortCos t hwdot1sMstiStpStatus hwdot1sMstiPortRootGuard hwdot1sMstiPortLoopGuard hwdot1sMstiStpPortSendingBP DUType hwdot1sMstiStpOperPortPoint ToPoint
read-write read-write read-write read-write read-only read-only read-only read-only read-only read-only read-only read-only read-write read-write read-write read-write read-write read-only read-only
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
30. A3COM-HUAWEI-LswDEVM-MIB
30.1 hwdevMSlotEnvironmentTable Name
hwdevMSlotEnvironmentType hwDevMSlotEnvironmentStatu s hwDevMSlotEnvironmentValue
Access
not-accessibl e read-only read-only
PDS
No No No
Description
Only support temperature(1). As per MIB Not supported. The value is always 65535 for read operation. Only support read operation. Only support read operation
read-write read-write
No No
Name
rLimit
Access
PDS
Description
index range
Unit1
Ent Pysi calC onta ined in ent Phy sical Par ent Rel Pos
Unit2
Ent Pysi calC onta ined in ent Phy sical Par ent Rel Pos
Unit3
Ent Pysi calC onta ined in ent Phy sical Par ent Rel Pos
Unit4
Ent Pysi calC onta ined in ent Phy sical Par ent Rel Pos
Unit5
Ent Pysi calC onta ined in ent Phy sical Par ent Rel Pos
Unit6
Ent Pysi calC onta ined in ent Phy sical Par ent Rel Pos
Unit7
Ent Pysi calC onta ined in ent Phy sical Par ent Rel Pos
Unit8
Ent Pysi calC onta ined in ent Phy sical Par ent Rel Pos
0 1 2
-1 1 0..3
0 1 167
-1 2 0..6
0 1 332
-1 3 0..6
0 1 497
-1 4 0..6
0 1 662
-1 5 0..6
0 1 827
-1 6 0..6
0 1 992
-1 7 0..6
0 1 115 7
-1 8 0..6
3 4.. 5
0 1
16 8 16 9.. 17 0 17 1.. 17 4 17 5
0. 1
33 3 33 4.. 33 5 33 6.. 33 9 34 0
0 1
49 8 49 9.. 50 0 50 1.. 50 4 50 5
0 1
66 3 66 4.. 66 5 66 6.. 66 9 67 0
0 1
82 8 82 9.. 83 0 83 1.. 83 4 83 5
0 1
99 3 99 4.. 99 5 99 6.. 99 9 10 00
0 1
0 1
fan
6.. 9
10
0.. 2
0.. 2
0.. 2
0.. 2
0.. 2
0.. 2
0.. 2
0.. 2
17. .19
18 2.. 18 4 18 5.. 18 7
34 7.. 34 9 35 0.. 35 2
51 2.. 51 4 51 5.. 51 7
67 7.. 67 9 68 0.. 68 2
84 2.. 84 4 84 5.. 84 7
port on subcard
20. .22
1.. 52
1.. 52
1.. 52
1.. 52
1.. 52
1.. 52
1.. 52
1.. 52
entPhysicalVendorType
read-only
N/A
entPhysicalContainedIn
read-only
N/A
Comments the index will chage for different products All of the entities should be given.For internal use. See table below. Use MIB objects in vendortype mib List for unit, module, fans, powersupply, submodule. Given a port entry in the physicalentity table, this mib object can be used to identify the parent Used to find out the unit, module, sub-module of its children.
entPhysicalClass
read-only
N/A
entPhysicalParentRelPos
read-only
N/A
ENT_PHY_OTHER = 1,/*1*return this /if a known classbut does not match any supported values. ENT_PHY_UNKNOWN,/*2*/ not supported ENT_PHY_CHASSIS,/*3*/-unit ENT_PHY_BACKPLANE,/*4 */ not supported ENT_PHY_CONTAINER,/*5 */slot (container level) and subslot (container leve2) ENT_PHY_POWERSUPPL Y,/*6*/ supported ENT_PHY_FAN,/*7*/ supported ENT_PHY_SENSOR,/*8*/ not supported ENT_PHY_MODULE,/*9*/b oard (in slot container level1)and subboard (in subslot container level2) ENT_PHY_PORT,/*10*/ supported ENT_PHY_STACK/*11*/--fa bric use this mib object to determine the sibling postion of unit, modules submodules, ports, fans and powersupply As per mib As per mib, Chassis only. As per mib, Chassis only. According to 3fc-518 Filename and version numbering schema.doc ww.xx.yyy, Only for chassis entity. Here, the ww.xx is provided by 3Com before software release, and The yyy will be provided by H3C to indicate the build version.
entPhysicalSerialNum
read-write
N/A
Provide for module, submodule, fans, power supply. Syntax: Customer Visible Serial Number (eg."DPPMWWB?????? ") And the string length is fixed to 25. .Now only support read-only. as per mib as per mib, Internal use only as per mib.Now only support read-only. as per mib. .Now only support read-only. as per mib
In the following table, if the entity is a virtual one, the objects except for the entPhysicalContainedIn and entPhysicalParentRelPos are meaningless to that entity.
entity
Unit
Slot SubSlot
entPhysicalDescr if the entity has value in VendorType MIB, that value will be filled in. if no value in VendorType MIB, but some poduct request, the request value will be filled in. if no value in VendorType MIB and no request, a null string will filled in. Number of device model. 3CR17250-91 "3Com Switch 5500G EI 24-Port Software Version 3Com OS V3.01.00s56" 3CR17251-91 "3Com Switch 5500G EI 48-Port Software Version 3Com OS V3.01.00s56" 3CR17252-91 "3Com Switch 5500G EI PWR 24-Port Software Version 3Com OS V3.01.00s56" 3CR17253-91 "3Com Switch 5500G EI PWR 48-Port Software Version 3Com OS V3.01.00s56" 3CR17258-91 "3Com Switch 5500G EI SFP 24-Port Software Version 3Com OS V3.01.00s56" 3CR17250-93 "3Com Switch 5500G EI 24-Port Software Version 3Com OS V3.01.00s168" 3CR17251-93 "3Com Switch 5500G EI 48-Port Software Version 3Com OS V3.01.00s168" 3CR17252-93 "3Com Switch 5500G EI PWR 24-Port Software Version 3Com OS V3.01.00s168" 3CR17253-93 "3Com Switch 5500G EI PWR 48-Port Software Version 3Com OS V3.01.00s168" 3CR17258-93 "3Com Switch 5500G EI SFP 24-Port Software Version 3Com OS V3.01.00s168" CONTAINER LEVEL1 CONTAINER LEVEL2
PowerSupply
SuperStack 4 Switch 5500G PSU 24 PT for 130W STD PSU SuperStack 4 Switch 5500G PSU 48 PT for 180W STD PSU SuperStack 4 Switch 5500G PoE PSU 24 PT for 24 Port PoE PSU
SuperStack 4 Switch 5500G PoE PSU 48 PT for 48 Port PoE PSU FAN UNIT NULL SuperStack 4 Switch 5500G 1-Port 10G Module for 1 Xenpak module SuperStack 4 Switch 5500G 8-Port SFP Module for 8 SFP module SuperStack 4 Switch 5500G 2-Port 10G Module for 2 XFP module Cascade Module --- For Cascade subslot SuperStack 4 Switch 5500G OSM Module for OSM module Equal to the ifDescr value for the port 5500G-EI entPhysicalVendorType(need complete VendorType MIB) No value in vendorType mib SysObjectID of the product 1.3.6.1.4.1.43.1.16.4.3.7 1.3.6.1.4.1.43.1.16.4.3.8 1.3.6.1.4.1.43.1.16.4.3.18 NULL NULL { h3cevtPowerSupply 4 } -- Standard 130W PSU { h3cevtPowerSupply 5 } -- Standard 180W PSU { h3cevtPowerSupply 6 } -- 24 Port POE PSU 480W { h3cevtPowerSupply 7 } -- 48 Port POE PSU 480W { h3cevtFan 2} -- h3cevtNonHotSwapFan For main board is NULL { h3cevtModuleSwitchType 173 } -- h3cevtModuleSw-LSSTK24G { h3cevtModuleSwitchType 167 } -- h3cevtModuleSw-LSGP8P { h3cevtModuleSwitchType 168 } -- h3cevtModuleSw-LSXK1P { h3cevtModuleSwitchType 169 } --h3cevtModuleSw-LSXP2P { h3cevtModuleSwitchType 167 } -- 8-Port 1000M SFP Module { h3cevtModuleSwitchType 168 } -- 1-Port 10G Xenpak Module { h3cevtModuleSwitchType 169 } -- 2-Port 10G XFP Module { h3cevtModuleSwitchType 707 } -- OSM Module
Fan Board
SubCard
Port
Fabric entity Unit Slot SubSlot PowerSupply Fan Board SubCard Port Fabric entity Unit Slot SubSlot PowerSupply Fan Board SubCard Port Fabric entity
{ h3cevtPortSwitchType 100 } { h3cevtPortSwitchType 44 } { h3cevtPortSwitchType 45 } { h3cevtPortSwitchType 46 } { h3cevtPortSwitchType 50 } { h3cevtPortSwitchType 51 } { h3cevtPortSwitchType 52 } { h3cevtPortSwitchType 53 } { h3cevtPortSwitchType 54 } { h3cevtPortSwitchType 55 } { h3cevtPortSwitchType 56 } { h3cevtPortSwitchType 57 } { h3cevtPortSwitchType 58 } { h3cevtPortSwitchType 47 } { h3cevtPortSwitchType 48 } { h3cevtPortSwitchType 49 } { h3cevtPortSwitchType 74 } { h3cevtPortSwitchType 75 } { h3cevtPortSwitchType 76 } { h3cevtPortSwitchType 77 } { h3cevtPortSwitchType 78 } { h3cevtPortSwitchType 79 } { h3cevtPortSwitchType 80 } { h3cevtPortSwitchType 81 } { h3cevtPortSwitchType 82 } { h3cevtPortSwitchType 83 } NULL entPhysicalContainedIn() see index range table above see index range table above see index range table above see index range table above see index range table above see index range table above see index range table above see index range table above see index range table above entPhysicalClass chassis(3) container(5) container(5) PowerSupply(6) fan(7) module(9) module(9) Port(10) stack(11) entPhysicalParentRelPos
-- 24G Cascade port -- 1000 Base-SX SFP Port -- 1000 Base-LX SFP Port -- 1000 Base-T AN SFP Port -- 1000 Base-ZX SFP Port -- 1000 Base-MM SFP Port -- 100 Base-SX SFP Port -- 100 Base-LX SFP Port -- 100 Base-T SFP Port -- 100 Base-ZX SFP Port -- 100 Base-MM SFP Port -- No Connector SFP Port -- Unknown SFP Port -- 10G Base-LX4 XENPAK Port -- 10G Base-LR XENPAK Port -- 10G Base-CX4 Port -- XFP without Transceiver -- 10GBASE-SR XFP Transceiver -- 10GBASE-LR XFP Transceiver -- 10GBASE-ER XFP Transceiver -- 10GBASE-SW XFP Transceiver -- 10GBASE-LW XFP Transceiver -- 10GBASE-EW XFP Transceiver -- 10GBASE-CX4 XFP Transceiver -- 10GBASE-LX4 XFP Transceiver -- Unknown XFP Transceiver
Unit Slot SubSlot PowerSupply Fan Board SubCard Port Fabric entity Unit Slot SubSlot PowerSupply Fan Board SubCard Port Fabric entity Unit Slot SubSlot PowerSupply Fan Board SubCard Port Fabric entity Unit Slot SubSlot PowerSupply Fan Board SubCard Port Fabric entity
see index range table above see index range table above see index range table above see index range table above see index range table above see index range table above see index range table above see index range table above see index range table above entPhysicalName. Unit+UnitID;Like Unit1 [1..8] Slot0 For F1 has just 1 slot. SubSlot+SubSlotNO;like SubSlot0 [0..2] PSU1, RPS1 Fan1 None modlulemoduleNO;like module0 [0..3] Port_Type + UnitID/SubslotID/Port_Number, like Ethernet 1/0/1 XRN Fabic entPhysicalHardwareRev PCB version of Slot0 None None not available not available None, because it is a logical (virtual) entity. PCB version of SubCard None None entPhysicalFirmwareRev Bootrom version of Slot0 None None Provided by the power supply vender None None, Bootrom version of SubCard None None entPhysicalSoftwareRev(used in Technique Support)
Unit The software version will follow the format: ww.xx.yySzzCaa, here the ww is the main platform version, the xx is the product main revision number and yy is the build number of the software and zz is encryption method of software (56 or 168) and the aa is the release candidate, so the first software image will show such version information: 3.01.00s56 Deliverable naming format will follow below Application files: > s4c03_01_00s56.app > s4c03_01_00s168.app > > boot file - s4f03_01_00.btm > web file - s4i03_01_00.web > > Network Management bundle (.app+.btm+.web) > s4c03_01_00s56NetMan.zip > s4c03_01_00s168NetMan.zip Slot SubSlot PowerSupply Fan Board SubCard Port Fabric entity Unit Slot SubSlot PowerSupply Fan Board SubCard Port Fabric entity Unit Slot SubSlot PowerSupply Fan Board SubCard Port Fabric None None None None not available None None entPhysicalSerialNum Customer Visible Serial Number None None Customer Visible Serial Number of PSU None None Customer Visible Serial Number of Expansion Card If SFP ports, the entPhysicalSerialNum should be the serial number if the SFP None entPhysicalMfgName must provided A string 3Com None None A string 3Com A string 3Com None A string 3Com None A string 3Com
entity Unit
Port Fabric entity Unit Slot SubSlot PowerSupply Fan Board SubCard Port Fabric entity Unit Slot SubSlot PowerSupply Fan Board SubCard Port Fabric entity Unit Slot SubSlot PowerSupply Fan Board SubCard
entPhysicalModelName confirm to each entry3C Number chassis 3CR17254-91 3CR17255-91 3CR17259-91 None None 3C17264 3C17265 3C17266 3C17267 None None 3C17261 3C17268 3C17260 3CR17280-72 None None entPhysicalAlias None None None None None None None None none entPhysicalAssetID None None None None None None None None None entPhysicalIsFRU True(1) False(2) False(2) True(1) True(1) False(2) True(1)
Port Fabric
31.1.1.4 Example
Below if a sample of entity MIB description of F1 products fabric, including: one fabric of 8 Units , each unit has 3 subcards, 2 powers and 1 fans, each subcard has a maximum of 52 ports(48 RJ45 fixed ports and 4 SFP ports, here front panel is regared as subcard0.
User sees Stack Unit 1 Slot0(for board0) slot1(for PSU) Slot2(for RPS) slot3(for FAN) Board0(a virtual board that contains subslots) PSU RPS FAN SubSlot0 SubSlot1 SubSlot2 SubCard0(Front Panel) SubCard1(Stacking ports) SubCard2(Expansion Card) Port on front panel Port on front panel Stacking port1 Stacking port2 Port on expansion card Port on expansion card Unit2 Unit4 Stack Port Container1 Stack Port Container2 Stack Port Container8 Stack Port1 Stack Port2
EntPhysic alIndex 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 69 70 121 122 173 515 1370 1371 1377 1378 1379
entPhysicalClas s stack (11) chassis (3) container(5) container(5) container(5) container(5) module(9) powerSupply(6) powerSupply(6) fan(7) container(5) container(5) container(5) module(9) module(9) module(9) port(10) port(10) port(10) port(10) port(10) port(10) port(10) port(10) port(10) chassis (3) chassis (3) container(5) container(5) container(5) port(10) port(10)
1 1 2
Entity MIB is used to express the physical location of the physical entities. Other relations, such as stack port pair and combo port pair, are not suitable to be implemented in Entity MIB. So it is better to create a new MIB to express these relations. The following is the sketch of this new table. There are 3 objects in entityRelationTable, they are entityIndex, entRelationType, relatedEntityIndex , and all of them are indexes of this table to identify one row of this table. This table is designed to express only relationship between entities, so if the status or other information of the entity is wanted, NMS can look into other tables. For example, if the ifDescr of the stack port is wanted, NMS can get ifIndex from AliasMappingTable, and then get ifDescr from ifTable by ifIndex. +----entityRelationTable +----entityIndex +----entRelationType +----relatedEntityIndex 31.1.1.5.2 Definition of each objects 31.1.1.5.2.1 entityIndex the entityIndex is the index of the entity, same as the entPhysicalIndex in Entity MIB. 31.1.1.5.2.2 entRelationType entRelationType describes the relation type of the two entities(indicated by entityIndex and relatedEntityIndex) . entRelationType { stackport, /*(1)*/ comboport /*(2)*/ } stackport: this port is a stack port. entityIndex is the default uplinkport index, and relatedEntityIndex is the default downlinkport index... 31.1.1.5.2.3 relatedEntityIndex relatedEntityIndex is the entity index that entityIndex related to, same as the entPhysicalIndex in Entity MIB. 31.1.1.5.3 examples entPhysicalIndex of stack port on unit1 is 27(uplinkport) and 28(downlinkport); entPhysicalIndex of stack port on unit2 is 132(uplinkport) and 133(downlinkport); stack port connection topology: 27->133132->28;
entityIndex 27 132 29
entRelationType 1 1 2
relatedEntityIndex 133 28 30
31.1.2 entLogicalTable
{ entityLogical
1}
PDS N/A
entLogicalDescr
read-only
N/A
entLogicalType
read-only
N/A
entLogicalCommunity
read-only
N/A
entLogicalTAddress
read-only
N/A
entLogicalTDomain
read-only
N/A
entLogicalContextEngineID
read-only
N/A
entLogicalContextName
read-only
N/A
Comments The index of entLogicalTable, it uniquely identifies one row in the entLogicalTable. For switch, the index of will be vlan id. A textual description of the logical entity. It can be considered as the name which the manufacturer gives to the logical entity. For switch, the value of this object will be vlan + vlanid. For switch, now only one kind of logical entity will be supported, so the value of this object will be the OID of dot1Dbridge. For switch, if the NMS accesses the agent with SNMPv1 or SNMPv2, the return value will be the read access community string + a symbol - + vlan + vlan id. If the NMS access the agent with SNMPv3, the return value will be the user name + a symbol - + vlan + vlan id. The value of this object will be the ip address of NMS and port number of which the agent receives the NMS message. For SNMP using UDP protocol the value of this object will always be the OID of snmpUDPDomain. The value of this object will be equal to the value of the local-engineid. The value of this object will always be -. The value of ContextName cannot be modified by cli or agent.
31.1.3 entLPMappingTable
{ entityMapping
1}
Access read-only
PDS N/A
Comments For switch, the value will be the physical index indicating the port in that vlan indicated by the logical index.
2}
Introduction: this table will be applied to ports. The input is the EntPhysicalIndex of ports, the output is the IfIndex of port.
PDS N/A
entAliasMappingIdentifier
N/A
As per MIB. Filled with the value of ifIndex of ifTable. Maps port entity index to ifTable index Provides iftable index for ports. For stack ports, it is the ifindex of the normal port corresponding to the stack port.
31.1.5 entPhysicalContainsTable
{ entityMapping
3}
Introduction: The input is the pair of ulEntPhysicalIndex and ulEntPhysicalChildIndex, the output is one pair of ulEntPhysicalIndex and ulEntPhysicalChildIndex.
Access read-only
4 }
PDS N/A
entityMIBObjects
Access read-only
PDS N/A
If there are changes in the tables (e.g unit ID change, board plug in/out etc.) above, the device will send out a trap to the network management to ask for an update of the tables.
31.2 A3COM-HUAWEI-ENTITY-EXT-MIB
This mib includes the general environment information of the device, which is an extension of entity mib defined in RFC2737.
31.2.1 h3cEntityExtStateTable The table is indexed by hwEntPhysicalIndex the same as entPhysicalIndex defined in RFC2737. Some objects in the table may be not supported by a specific entity. In that case, the instance for the object has no meaning. For example, hwEntityCpuUsage for fans has no meaning.
PDS NO
h3cEntityExtAdminStatus
NO
h3cEntityExtOperStatus
read-only
NO
h3cEntityExtStandbyStatus h3cEntityExtAlarmLight h3cEntityExtCpuUsage h3cEntityExtCpuUsageThreshol d h3cEntityExtMemUsage h3cEntityExtMemUsageThresho ld h3cEntityExtMemSize h3cEntityExtUpTime h3cEntityExtTemperature h3cEntityExtCriticalTemperature Threshold h3cEntityExtTemperatureThresh old h3cEntityExtVoltage h3cEntityExtVoltageLowThresh old h3cEntityExtVoltageHighThresh old
read-only read-only read-only read-write read-only read-write read-only read-only read-only read-write read-write read-only read-write read-write
NO NO NO NO NO NO NO NO NO NO NO NO NO NO
Comments The index of the table, the same as the entPhysicalIndex defined in ENTITY-MIB enable or disable an entity, only can be set on PORT entity. Represent the possible values of operational states. A value of disabled means the entity goes wrong, and cannot be operated. A value of enabled means the entity is partially or fully operable. As per MIB. Not support As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. Not support Not support, user can not set this value via MIB Not support, user can not set this value via MIB Not support, user can not set this value via MIB Not support, user can not set this value via MIB Not support, user can not set this value via MIB
h3cEntityExtErrorStatus
read-only
NO
Indicate the port status notSupported(1) normal(2) postFailure(3) entityAbsent(4) poeError(11) stackError(21) stackPortBlocked(22) stackPortFailed(23) sfpRecvError(31) sfpSendError(32) sfpBothError(33) fanError(41) psuError(51) rpsError(61)
moduleFaulty(71)
h3cEntityExtMacAddress
read-only
NO
When the entity is stack, h3cEntityExtMacAddress display BridgeMacAddress. When the entity is unit, h3cEntityExtMacAddress display UnitMac.
When the entity do not support h3cEntityExtMacAddress, h3cEntityExtMacAddress display 00. 00. 00. 00. 00. 00
Stack (Fabric ) N N N N N
Chass is (Unit) N N N N N
h3cEntityExtAdmin Status(R/W) h3cEntityExtOper Status (R) h3cEntityExtStand byStatus(R) h3cEntityExtAlarm Light (R) h3cEntityExtCpuU sage (R)
Module (board, subcard ) N Y Y N Y(the module which has cup) Y(the module which has cup) Y(the
Power Suppl y N Y Y N N
Fan
N Y Y N N
h3cEntityExtyMem
Usage (R)
h3cEntityExtUpTi me(R)
h3cEntityExtTemp erature (R) h3cEntityExtTemp eratureThreshold (OPT temperature)(R/W) h3cEntityExtVoltag e(R) h3cEntityExtVoltag eLowThreshold(R/ W) h3cEntityExtVoltag eHighThreshold(R/ W) h3cEntityExtCritica lTemperatureThre shold (R/W) h3cEntityExtMacA ddress(R) h3cEntityExtError Status(R)
main board only) Y(the main board only) Y(the main board only) N
N N
N N
N N
N N
N N
N N
N N
N N
N N
N N
N N
N N
N N
Y N
Y N
N N
N Y
N Y
N Y
read-only hwdot1qMacSearchAgeTime
N/A
32.2 hwdot1qTpFdbSetTable { hwLswMacPort 2 } MIB Objects hwdot1qTpFdbSetAddress hwdot1qTpFdbSetPort hwdot1qTpFdbSetStatus hwdot1qTpFdbSetOperate Access NA read-write read- write write -only PDS N/A N/A N/A N/A Comments As per MIB. As per MIB. As per MIB. As per MIB.
33.1 hwTrngCreateTimerangeTable
The creation of a time range is implemented by hwTrngCreateTimerangeTable
Description As per MIB As per MIB True for valid. Only support creadandgo(4) to create an instance
Description As per MIB As per MIB As per MIB As per MIB Only support creadandgo(4) to create an instance
33.3 hwTrngPeriodicTable
hwTrngPeriodicTable: specify a periodic range for a time range created in hwTrngCreateTimerangeTable.
Name hwTrngPeriodicNameIn dex hwTrngPeriodicSubInde x hwTrngPeriodicDayOfW eek hwTimerangePeriodicSt artTime hwTimerangePeriodicEn dTime hwTimerangePeriodicRo wStatus
Description As per MIB As per MIB As per MIB As per MIB As per MIB Only support creadandgo(4) to create an instance
34.1 Scalar objects Name hwPriorityTrustMode hwPortMonitorBothIfInd ex Access Read-only read-write PDS No Yes Description Not supported As per MIB
34.2 hwPortMonitorBothIfIndex 34.3 hwQueueTable Name hwQueueIfIndex hwQueueScheduleMode hwQueueWeight1 hwQueueWeight2 hwQueueWeight3 hwQueueWeight4 hwQueueWeight5 hwQueueWeight6 hwQueueWeight7 hwQueueWeight8 hwQueueMaxDelay Access Read-only Read-write Read-write Read-write Read-write Read-write Read-write Read-write Read-write Read-wirte Read-write PDS Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Description If ifIndex is 0, then it is global queue support sp and wrr As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB Not Support
34.4 hwRateLimitTable Note:This table only support Create and destroy Name Access hwRateLimitAclIndex read-create
PDS Yes
hwRateLimitIfIndex
read-create
Yes
hwRateLimitVlanID
read-create
Yes
hwRateLimitDirection
read-create
Yes
hwRateLimitUserAclNum hwRateLimitUserAclRule hwRateLimitIpAclNum hwRateLimitIpAclRule hwRateLimitLinkAclNum hwRateLimitLinkAclRule hwRateLimitTargetRateM bps hwRateLimitTargetRateKb ps hwRateLimitPeakRate hwRateLimitCIR hwRateLimitCBS hwRateLimitEBS hwRateLimitPIR hwRateLimitConformLocal Pre hwRateLimitConformActio nType hwRateLimitExceedAction Type hwRateLimitExceedDscp hwRateLimitRuntime hwRateLimitRowStatus hwRateLimitExceedCos hwRateLimitConformCos hwRateLimitConformDscp
Description As Per MIB Now not support set and creat operation. As Per MIB Now not support set and creat operation. The value is 0 Now not support set and creat operation. As Per MIB Now not support set and creat operation. 0 is invalid value 65535 is invalid value 0 is invalid value 65535 is invalid value 0 is invalid value 65535 is invalid value Not support range is 0 and from 64 to 1000000 Not support Not support Not support Not support Not support Not support Not support As Per MIB As Per MIB As Per MIB As Per MIB Not support Not support Not support
read-create read-create read-create read-create read-create read-create read-create read-create read-create read-only read-create read-create read-create read-create
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
34.5 hwPriorityTable Note:This table only support Create and destroy Name Access hwPriorityAclIndex read-create
PDS Yes
hwPriorityIfIndex hwPriorityVlanID
read-create read-create
Yes Yes
hwPriorityDirection hwPriorityUserAclNum hwPriorityUserAclRule hwPriorityIpAclNum hwPriorityIpAclRule hwPriorityLinkAclNum hwPriorityLinkAclRule hwPriorityDscp hwPriorityIpPre hwPriorityIpPreFromCos hwPriorityCos hwPriorityCosFromIpPre hwPriorityLocalPre hwPriorityPolicedServiceT ype hwPriorityPolicedServiceD scp hwPriorityPolicedServiceE xp hwPriorityPolicedServiceC os hwPriorityPolicedServiceL oaclPre hwPriorityPolicedServiceD ropPriority hwPriorityRuntime hwPriorityRowStatus
read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-only read-create
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
and creat operation. Now not support set and creat operation. The value is 0Now not support set and creat operation. Now not support set and creat operation. 0 is invalid value 65535 is invalid value 0 is invalid value 65535 is invalid value 0 is invalid value 65535 is invalid value As Per MIB As Per MIB As per MIB As Per MIB As per MIB As Per MIB Not support Not support Not support Not support Not support Not support As Per MIB As Per MIB
34.6 hwRedirectTable Note:This table only support Create and destroy Name Access read-create hwRedirectAclIndex read-create hwRedirectIfIndex read-create hwRedirectVlanID hwRedirectDirection read-create Yes Yes
PDS Yes
Yes
Description As Per MIB Now not support set and creat operation. As Per MIB Now not support set and creat operation. The value is 0 Now not support set and creat operation. As Per MIB
hwRedirectUserAclNum hwRedirectUserAclRule hwRedirectIpAclNum hwRedirectIpAclRule hwRedirectLinkAclNum hwRedirectLinkAclRule hwRedirectCpu hwRedirectToIfIndex hwRedirectToNextHop1 hwRedirectToNextHop2 hwRedirectRuntime hwRedirectRowStatus
read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-only read-create
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Now not support set and creat operation. 0 is invalid value 65535 is invalid value 0 is invalid value 65535 is invalid value 0 is invalid value 65535 is invalid value As Per MIB As Per MIB Not support Not support As Per MIB As Per MIB
34.7 hwStatisticTable
Note:This table only support Create and destroy
Name hwStatisticAclIndex
Access read-create
PDS Yes
read-create hwStatisticIfIndex read-create hwStatisticVlanID read-create hwStatisticDirection hwStatisticUserAclNum hwStatisticUserAclRule hwStatisticIpAclNum hwStatisticIpAclRule hwStatisticLinkAclNum hwStatisticLinkAclRule hwStatisticRuntime hwStatisticPacketCount hwStatisticByteCount hwStatisticCountClear hwStatisticRowStatus hwStatisticPacketXCount hwStatisticByteXCount read-create read-create read-create read-create read-create read-create read-only read-only read-only read-write read-create read-only read-only
Yes
Yes
Yes
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Description As Per MIB Now not support set and creat operation. As Per MIB Now not support set and creat operation. The value is 0 Now not support set and creat operation. As Per MIB Now not support set and creat operation. 0 is invalid value 65535 is invalid value 0 is invalid value 65535 is invalid value 0 is invalid value 65535 is invalid value As Per MIB As Per MIB Not support As Per MIB As Per MIB As Per MIB Not support
34.8 hwMirrorTable 34.9 Note:This table only support Create and destroy Name hwMirrorAclIndex Access read-create PDS Yes Description As Per MIB Now not support set and creat operation. As per mib Now not support set and creat operation. The value is 0 Now not support set and creat operation. As Per MIB Now not support set and creat operation. As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As per MIB As per MIB As Per MIB As per MIB
hwMirrorIfIndex
read-create
Yes
hwMirrorVlanID
read-create
Yes
hwMirrorDirection
read-create
Yes
hwMirrorUserAclNum hwMirrorUserAclRule hwMirrorIpAclNum hwMirrorIpAclRule hwMirrorLinkAclNum hwMirrorLinkAclRule hwMirrorToIfIndex hwMirrorToCpu hwMirrorRuntime hwMirrorRowStatus
read-create read-create read-create read-create read-create read-create read-create read-create read-only read-create
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
34.10
hwPortMirrorTable
Access read-create
PDS Yes
read-create read-create
Yes Yes
Description As Per MIB Now not support set and creat operation. As Per MIB Only support creadAndGo(4) to create an instance
34.11
hwLineRateTable
Name hwLineRateIfIndex
Access read-create
PDS Yes
Yes
Yes
Description As Per MIB Now not support set and creat operation. As Per MIB Now not support set and creat operation. As Per MIB
hwLineRateRowStatus
read-create
Yes
As Per MIB
34.12
34.13
34.14
34.15
34.16
34.17
34.18
34.19
34.20
hwCosToLocalPrecedenceMapTable
34.21
34.22
34.23
34.24
34.25
34.26
hwRemarkVlanIDTable Not-accessibl e Not-accessibl e Not-accessibl e Not-accessibl e Read-create Read-create Read-create Read-create Read-create Read-create Read-create No No No No current current current current current current current The range is from 1 to 2999 As per MIB Not supported and the default value is 0 only support input(1) 0 is invalid value. 65535 is invalid value. 0 is invalid value. 65535 is invalid value. 0 is invalid value. 65535 is invalid value. The remarking of this value must banding with hwRemarkVlanIDUserAclNum hwRemarkVlanIDUserAclRule hwRemarkVlanIDIpAclNum hwRemarkVlanIDIpAclRule hwRemarkVlanIDLinkAclNum hwRemarkVlanIDLinkAclRule and hwRemarkVlanIDRowStatus Not supported and the default value is 0 Support active(1), CreateAndGo(4) and Destory(6)
hwRemarkVlanIDAclInde x hwRemarkVlanIDIfIndex hwRemarkVlanIDVlanID hwRemarkVlanIDDirectio n hwRemarkVlanIDUserAcl Num hwRemarkVlanIDUserAcl Rule hwRemarkVlanIDIpAclNu m hwRemarkVlanIDIpAclRul e hwRemarkVlanIDLinkAcl Num hwRemarkVlanIDLinkAcl Rule hwRemarkVlanIDRemark VlanID
Read-create Read-create
current current
35.3 h3cAclNameGroupTable
ACL name group is no longer supported in F1 products
35.4 h3cAclBasicRuleTable
NOTE: h3cAclBasicSrcIp and h3cAclBasicSrcWild SHOULD be set simultaneously.
Name
h3cAclBasicAclNum
Access
not-accessible
PDS
Yes
h3cAclBasicSubitem
not-accessible
Yes
h3cAclBasicAct h3cAclBasicSrcIp h3cAclBasicSrcWild h3cAclBasicFragments h3cAclBasicTimeRangeName h3cAclBasicEnable h3cAclBasicCount h3cAclBasicCountClear h3cAclBasicRowStatus h3cAclBasicLog
read-create read-create read-create read-create read-create read-only read-only read-create read-create read-create
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Description As per MIB As per MIB The valid range of this node is 0 to 65534 As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB Now support three state:CreateAndGo,Active,Destroy. Not supported
35.5 h3cAclAdvancedRuleTable
NOTE: h3cAclAdvancedSrcIp and h3cAclAdvancedSrcWild SHOULD be set simultaneously;h3cAclAdvancedDestIp and h3cAclAdvancedDestWild SHOULD be set simultaneously;
Name
h3cAclAdvancedAclNum
Access
not-accessible
PDS
Yes
h3cAclAdvancedSubitem
not-accessible
Yes
h3cAclAdvancedAct h3cAclAdvancedProtocol h3cAclAdvancedEstablish h3cAclAdvancedSrcIp h3cAclAdvancedSrcWild h3cAclAdvancedSrcOp h3cAclAdvancedSrcRange h3cAclAdvancedSrcPort1 h3cAclAdvancedSrcPort2 h3cAclAdvancedDestIp h3cAclAdvancedDestWild h3cAclAdvancedDestOp h3cAclAdvancedDestRange h3cAclAdvancedDestPort1 h3cAclAdvancedDestPort2 h3cAclAdvancedIcmpType h3cAclAdvancedIcmpCode h3cAclAdvancedFragments h3cAclAdvancedPrecedence h3cAclAdvancedTos h3cAclAdvancedDscp h3cAclAdvancedTimeRangeName h3cAclAdvancedEnable h3cAclAdvancedCount h3cAclAdvancedCountClear h3cAclAdvancedRowStatus
read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-only read-only read-create Read-create
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Description As per MIB As per MIB The valid range of this node is 0 to 65534 As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB Now support three state:CreateAndGo,Active,Destroy.
35.6 h3cAclIfRuleTable
NOTE: Support or Not Support this table is decided by different products. h3cAclIfAny and h3cAclIfIndex SHOULD NOT be set simultaneously
Name h3cAclIfAclNum
h3cAclIfSubitem
Access not-accessible
not-accessible
h3cAclIfAct
read-create
Yes
Description As per MIB As per MIB The valid range of this node is 0 to 65534 As Per MIB
As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB As Per MIB Now support three state:CreateAndGo,Active,Destroy
35.7 h3cAclLinkTable
NOTE:h3cAclLinkSrcAny and h3cAclLinkSrcVlanId, h3cAclLinkSrcMac, h3cAclLinkSrcIfIndex SHOULD NOT be set simultaneously;If h3cAclLinkSrcMacWild is supported, then h3cAclLinkSrcMac and h3cAclLinkSrcMacWild SHOULD be set simultaneously;h3cAclLinkDestAny and h3cAclLinkDestVlanId, h3cAclLinkDestMac, h3cAclLinkDestIfIndex SHOULD NOT be set simultaneously;If h3cAclLinkDestMacWild is supported, then h3cAclLinkDestMac and h3cAclLinkDestMacWild SHOULD be set simultaneously.
Name
h3cAclLinkAclNum
Access
not-accessible
PDS
Yes
h3cAclLinkSubitem
not-accessible
Yes
h3cAclLinkAct h3cAclLinkProtocol h3cAclLinkFormatType h3cAclLinkVlanTag h3cAclLinkVlanPri h3cAclLinkSrcVlanId h3cAclLinkSrcMac h3cAclLinkSrcMacWild h3cAclLinkSrcIfIndex h3cAclLinkSrcAny h3cAclLinkDestVlanId h3cAclLinkDestMac h3cAclLinkDestMacWild h3cAclLinkDestIfIndex h3cAclLinkDestAny h3cAclLinkTimeRangeName h3cAclLinkEnable h3cAclLinkRowStatus h3cAclLinkTypeCode h3cAclLinkTypeMask
read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-create read-only read-create read-create read-create
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Description As per MIB As per MIB The valid range of this node is 0 to 65534 As Per MIB Not supported As Per MIB Not supported As Per MIB As Per MIB As Per MIB Source Mac wild Not Supported As Per MIB Not supported As Per MIB Destination Mac wild Not support Not support As Per MIB As Per MIB Now support three state:CreateAndGo,Active,Destroy As Per MIB As Per MIB
35.8 h3cAclUserTable
Note: h3cAclUserRuleStr and h3cAclUserRuleMask SHOULD be set simultaneously.
Description As per MIB As per MIB The valid range of this node is 0 to 65534 As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB Now support three state:CreateAndGo,Active,Destroy.
35.9 h3cAclActiveTable
This MIB is not supported in F1 software.
36. A3COM-HUAWEI-IswINF-MIB
36.1
Scalar objects of hwLswL2InfMibObject Access read-only read-only Read-only Read-write read-write read-write PDS no no no no yes No Description As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
hwVlanVPNTPIDMode
read-only
No
Mode port-based means that setting TPID is based on port, each port can set different TPID. in this case, the node hwifVlanVPNTPID is read-write and hwVlanVPNTPID is read-only with vlaue 0 , hwVlanVPNTPID has no meaning, mode global means that setting TPID is global, all the ports with the same TPID as the global tpid.in this case, hwVlanVPNTPID is read-write,and
MIB Objects Access PDS Comments hwifHybridPortIndex read-only No Hybrid port ifIndex hwifHybridTaggedVl read-write No Taggedvlan list that a hybrid port anListLow permitted to pass. hwifHybridTaggedVl read-write No taggedvlan list that a hybrid port anListHigh permitted to pass hwifHybridUnTagge read-write No untaggedvlan list that a hybrid dVlanListLow port permitted to pass. hwifHybridUnTagge read-write No untaggedvlan list that a hybrid dVlanListHigh port permitted to pass. Note: The values of below nodes must be appointted at the same time when SET: hwifHybridTaggedVlanListLow, hwifHybridTaggedVlanListHigh, hwifHybridUnTaggedVlanListLow, hwifHybridUnTaggedVlanListHigh
36.3 hwifVLANTrunkStatusTable
MIB Objects Access PDS Comments
read-only read-only
No No
Index of VLANTrunk interface. Real VLAN passed through the portevery bit denote a VLAN. From1 to 2048 Real VLAN passed through the portevery bit denote a VLAN. From 2049 to 4094 VLAN permited to pass through the port.every bit denote a VLAN. From 1 to 2048 VLAN permited to pass through the port.every bit denote a VLAN. From 2049 to 4094
read-only
No
read-write
No
read-write
No
36.4 hwethernetTable
MIB Objects Access PDS Comments
hwifEthernetDuplex
read-write
No
interface duplex mode configured by user. value list: full(1) half(2) , auto(3) But duplex half operation is not supported in the following situation: the port is in 8SFP extend board; the port is combo port; the ports speed has been set to 1000M; If the port is in 10GE extend board ,all duplex set operations are not support MTU on the Ethernet interface Interface speed mode configured by user value list: auto(0) ,s10M(10) ,s100M(100) , s1000M(1000) , s10000M(10000), ,s24000M(24 000) But if the port is in 8SFP extend board or it is combo port ,only speed 1000 operation is supported If the port is in 10GE extend board ,all speed set operations are not support Type of the line connected to the port: MDI-II (straight-through cable): 1, MDI-X (crossover cable): 2, MDI-AUTO (auto-sensing): 3 The maximum number of MAC addresses that the port can learn. 65535 is the default value, which doesnt limit the number of mac-address learned. eanbled(1) means the interface can learn mac address, otherwise disabled(2) should be set. Test this interface. F1 doesnt support this item. Not Support
hwifEthernetMTU hwifEthernetSpeed
read-write read-write
No No
hwifEthernetMdi
read-write
No
hwMaxMacLearn
read-write
No
hwifMacAddressLea rn
read-only
No
Write-only read-write
No No
hwifEthernetIsolate
The isolate group tha the port belong to .Value list:0x00,0x80. The value cannot be set when the ports STP is on. As per MIB As per MIB As per MIB As per MIB
36.5
hwifXXTable
Name
Access
PDS
Description
hwifUnBound Port hwifISPhyPort hwifAggregate Port hwifMirrorPort hwifVLANTyp e hwifMcastCon trol hwifFlowContr ol hwifSrcMacC ontrol hwifClearStat hwifXXBaseP ortIndex hwifXXDevPo rtIndex hwifPpsMcast Control
read-only read-only read-only read-writ e read-writ e read-writ e read-writ e read-only Read-writ e read-only read-only read-writ e
As per mib As per mib As per mib Not supported As per mib As per mib.The default value is 100. As per mib.The default value is false(2). Not supported. only support write As per mib As per mib The broadcast suppression with pps(packet per second) type, the max value is determined by the port type and product. The step of unicast suppression in ratio mode. Not support. It will return the default value 1. The max pps(packet per second) value of unicast suppression in pps mode. Its value depends on the product. For monza or 3900, it will be:
hwifUniSuppr essionStep
read-only
No
hwifPpsUniSu ppressionMax
read-only
No
hwifMulSuppr essionStep
read-only
No
hwifPpsMulSu ppressionMax
read-only
No
hwifUniSuppr ession
read-writ e
No
10M Ethernet 14881 100M Ethernet 148810 gbit Ethernet 262143 10gbit Ethernet 14881000 The step of multicast suppression in ratio mode. Not support. It will return the default value 1. The max pps(packet per second) value of multicast suppression in pps mode Its value depends on the product. For monza or 3900, it will be: 10M Ethernet 14881 100M Ethernet 148810 gbit Ethernet 262143 10gbit Ethernet 14881000 The unicast suppression with the ranging from 1 to 100% in ratio mode. The step is determined by hwifUniSuppressionStep. The unicast suppression in pps(packet per second) mode. The max value is determined by hwifPpsUniSuppressionMax The multicast suppression with ranging from 1 to 100% in ratio mode. The step is determined by hwifMulSuppressionStep. The multicast suppression in pps(packet per second) mode. The max pps value is determined by hwifPpsMulSuppressionMax
hwifPpsUniSu ppression
read-writ e
No
hwifMulSuppr ession
read-writ e
no
hwifPpsMulSu ppression
read-writ e
no
36.6
Name
Access
PDS
Description
hwifAggregate OperStatus
read-crea te
37. A3COM-HUAWEI-IswVLAN-MIB
37.1 hwdot1qVlanMIBTable
37.1.1 hwdot1qVlanMIBTable MIB Objects Access PDS Comments
No No No
The VLAN-ID
Description of VLAN
Port list that belongs to the VLAN. Each bit of hwdot1qVlanPorts represents a port within fabric-wide. In fabric, any port has an exclusive fabric-wide portId. So each bit can means only one fabric wide port. MAX_PORT_NUM_PER_UNIT( =58 for F1) is a macro which help to distinguish the port of different unit. MAX_PORT_NUM_PER_UNIT indicates the max port number of a unit. So the exclusive fabric wide port number can be acquired from local-unit port number by this way: portId (fabric wide) = (unitId-1)*MAX_PORT_NUM_P ER_UNIT+portid (unit-wide). The range of unitId is [1..8] for F1. Portid(unit-wide) is [0.. MAX_PORT_NUM_PER_UNIT1] For example, the first port on unit 2 has a fabric-wide port id: (2-1)* MAX_PORT_NUM_PER_UNIT + 0=58. So the 58th bit of hwdot1qVlanPorts represents the first port on unit 2.
hwdot1qVlanType
Read-creat e
No
hwdot1qVlanMacFilt er hwdot1qVlanMcastU nknownProtos hwExistInterface hwVlanInterfaceInde x hwdot1qVlanMacLe arn hwdot1qVlanStatus hwdot1qVlanCreatio nTime hwdot1qVlanPriority hwdot1qVlanRowSt atus
No No No No No No No No No
Vlan type Common vlan(2) Sub_vlan(3) Primary_vlan(4) Secondary_vlan(5) Not supported Not supported Whether virtual interface exist. VLAN virtual interface index. Not supported Steate of the VLAN. sysUpTime of the VLAN when the Vlan created. Priotity of the vlan. Only support createAndGo(4), active(1) , destory(6)
37.2 hwVlanInterfaceTable
37.2.1 hwVlanInterfaceTable MIB Objects Access PDS Comments
No No No
Index of virtual interface of VLAN. VLANID Ip address of interface. Set opertion only support Multiple Variable Bindings . This object must bind hwdot1qVlanIPAddressMask. Address mask of interface. Set opertion only support Multiple Variable Bindings. This object must bind hwdot1qVlanIPAddress. State of virtual interface of VLAN. Frame type accepted by virtual interface of VLAN. Only support createAndGo(4), active(1) , destory(6) Not Support
hwdot1qVlanIPAddr essMask
read-creat e
No
No No No No
hwVlanInterfaceIPM ethod
Read-write
Yes
As per mib
37.3 hwVlanInterfaceAddrTable
37.3.1 hwVlanInterfaceAddrTable MIB Objects Access PDS Comments
No No No
read-write read-creat e
No No
Name dot1xPaeSystemAuthControl
Access read-write
PDS Yes
41.1.2 dot1xPaePortTable
Description As per MIB As per MIB As per MIB Only support read operation Only support read operation
41.1.3 dot1xAuthConfigTable
Name dot1xAuthPaeState dot1xAuthBackendAuthState dot1xAuthAdminControlledDirections dot1xAuthOperControlledDirections dot1xAuthAuthControlledPortStatus dot1xAuthAuthControlledPortControl dot1xAuthQuietPeriod dot1xAuthTxPeriod dot1xAuthSuppTimeout dot1xAuthServerTimeout dot1xAuthMaxReq dot1xAuthReAuthPeriod dot1xAuthReAuthEnabled dot1xAuthKeyTxEnabled
41.1.4 dot1xAuthStatsTable This table is not supported.
Access read-only read-only read-write read-only read-only read-write read-write read-write read-write read-write read-write read-write read-write read-write
Description not supported not supported As per MIB not supported As per MIB As per MIB not supported not supported not supported not supported not supported not supported not supported not supported
Name dot1xAuthEapolFramesRx dot1xAuthEapolFramesTx dot1xAuthEapolStartFramesRx dot1xAuthEapolLogoffFramesRx dot1xAuthEapolRespIdFramesRx dot1xAuthEapolRespFramesRx dot1xAuthEapolReqIdFramesTx dot1xAuthEapolReqFramesTx dot1xAuthInvalidEapolFramesRx dot1xAuthEapLengthErrorFramesRx dot1xAuthLastEapolFrameVersion dot1xAuthLastEapolFrameSource
Access read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
PDS no no no no no no no no no no no no
Description Not Support Not Support Not Support Not Support Not Support Not Support Not Support Not Support Not Support Not Support Not Support Not Support
41.1.5 dot1xAuthSessionStatsTable
Description as per MIB as per MIB as per MIB as per MIB as per MIB Not support
Description as per MIB as per MIB as per MIB as per MIB as per MIB
Scalar Objects Access read-only read-only PDS No No Description As per MIB As per MIB
radiusAuthServerTable Access not-accessib le read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only PDS No Yes Yes No No No No No No No No No No No No Description As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
Name radiusAuthServerIndex radiusAuthServerAddress radiusAuthClientServerPortN umber radiusAuthClientRoundTripTi me radiusAuthClientAccessRequ ests radiusAuthClientAccessRetra nsmissions radiusAuthClientAccessAcce pts radiusAuthClientAccessRejec ts radiusAuthClientAccessChall enges radiusAuthClientMalformedAc cessResponses radiusAuthClientBadAuthenti cators radiusAuthClientPendingReq uests radiusAuthClientTimeouts radiusAuthClientUnknownTyp es radiusAuthClientPacketsDrop ped
42.2 RADIUS-ACC-CLIENT-MIB
42.2.1
radiusAccClientIdentifier
42.2.2
read-only
No
As per MIB
radiusAccServerTable Access not-accessib le read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only PDS No Yes Yes No No No No No No No No No No Description As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
Name radiusAccServerIndex radiusAccServerAddress radiusAccClientServerPortNu mber radiusAccClientRoundTripTi me radiusAccClientRequests radiusAccClientRetransmissi ons radiusAccClientResponses radiusAccClientMalformedRe sponses radiusAccClientBadAuthentic ators radiusAccClientPendingRequ ests radiusAccClientTimeouts radiusAccClientUnknownTyp es radiusAccClientPacketsDropp ed
pingResultsOperStatus pingResultsIpTargetAddress pingResultsMinRtt pingResultsMaxRtt pingResultsAverageRtt pingResultsProbeResponses pingResultsSentProbes pingResultsRttSumOfSquares Destroy the pingCtlTable row manually.
Access
N/A N/A N/A
PDS
N/A N/A N/A
Description
As per MIB As per MIB As per MIB
Access
Read-write
PDS
Yes
Description
Not supported. In LSW product,the value is 5
Access
not-accessible not-accessible read-create read-create read-create
PDS
Yes Yes Yes Yes Yes
Description
As per MIB.( Administrator name) Aggregated link Description.(HWPing test name) IN LSW product, The type of host address must be IPV4, it is 1. As per MIB. The range of pingCtlDataSize is[4,8100] except jitter test. For jitter test, the default value is 68, and the range of this object is [68, 8100], For icmp test, the default value is 56. For both udppublic test and udpprivate test, the default value is 100. The default value of rest test is 0. As per MIB. As per MIB. As per MIB. Not supported In LSW products, The number of seconds to wait before repeating a ping test is between 0 and 65535 seconds. In LSW product,the value is 50. Not supported As per MIB. As per MIB. As per MIB. As per MIB. Not supported IN LSW product, The type of host address must be IPV4, it is 1. As per MIB.
Access
read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
PDS
No No No No No No No No No No
Description
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
Access
not-accessible read-only read-only read-only read-only
PDS
No No No No No
Description
As per MIB As per MIB As per mib As per MIB As per MIB
45. A3COM-HUAWEI-PING-MIB
45.1 hwPingAgentEnable
Access
read-create
Name
hwPingAgentEnable
PDS
Yes
Description
Enable Ping test function
46. A3COM-HUAWEI-FTM-MIB
This mib Is used to products which support XRN. when change unit ID, the time restriction are as follows: Case 1:
8 units in fabric with auto numbering by default, to change them to manual numbering one by one, the total time is 150 seconds. For the first 5 units, it takes about 15 seconds for each unit to finish the unit ID change; for the last 3 units, it takes about 30 seconds for each unit to do it; In this case, there is no master unit change and no unit ID conflict; Case 2: 8 units in fabric with master change, for example, to change unit 1 to unit 8, it takes about 120 seconds; Case 3: 8 units in fabric without master change but with unit ID conflict, for example, to change unit 2 to unit 3, it takes about 90 seconds; For 3ND, only case 1 is used, so we think that it may set the overtime to be 30 seconds with one packet one unit ID change operation to fix this problem;
46.1
Scalar Objects
Name
Access
PDS
Description
H3cFtmUnitTable
Name
Access
PDS
Description
No No Yes NO NO
This is the entPhysicalIndex for F1 . As per MIB As per MIB As per MIB Numbering Mode of unit in XRN-Fabric. If the unit ID is assigned by the auto numbering algorithm, the numbering mode will be automatic numbering; if the unit ID (h3cFtmUnitID) is assigned by the user, the numbering mode will be manual numbering; if h3cFtmUnitID is set to be zero, the numbering mode will become automatic
46.3
Notifications
Name
Acces s
PDS
Description
NA NA
No No
47. A3COM-HUAWEI-VOICE-VLAN-MIB
This mib is supported by switch only. This mib need to be confirmed by products whether supported or not.
47.1
Scalar objects
Name
Access
PDS
Description
h3cVoiceVlanEnabledId h3cVoiceVlanPortEnableList
read-write read-write
Yes Yes
As per MIB The port list indicates which ports are voice vlan enabled ports. Each port is represented, in the form of the most significant bit of the first octet representing the port 8, the next most significant bit representing the port 7, the least significant bit of the first octet representing the port 1, the most significant bit of the second octet representing the port 16, the next most significant bit representing the port 15, the least significant bit of the second octet representing the port 9. The rest may be
deduced by analogy. The ports are voice vlan enabled ports for those ports which have one in its corresponding bit, not otherwise. As per MIB As per MIB As per MIB
47.2
h3cvoiceVlanOuiTable
Name
Access
PDS
Description
47.3
Name
LinkUp
RFC1215
Comments As per MIB As per MIB The varbinds as defined in RFC1573. This will be used for VPN tunnel interfaces as well. In the case of dynamic VPNs (auto-mesh) - the ifIndex in the linkDown trap may no longer exist in the ifTable. The varbinds as defined in RFC1573. This will
AuthenticationFailure risingAlarm fallingAlarm entConfigChange ospfNbrStateChange ospfVirtNbrStateChange ospfIfConfigError ospfVirtIfConfigError ospfIfAuthFailure ospfVirtIfAuthFailure ospfVirtIfRxBadPacket ospfTxRetransmit ospfVirtIfTxRetransmit ospfOriginateLsa ospfMaxAgeLsa ospfLsdbOverflow ospfLsdbApproachingOv erflow
RFC1215 RMON-MI B RMON-MI B RFC2737 RFC1850 RFC1850 RFC1850 RFC1850 RFC1850 RFC1850 RFC1850 RFC1850 RFC1850 RFC1850 RFC1850 RFC1850 RFC1850
be used for VPN tunnel interfaces as well. In the case of dynamic VPNs (auto-mesh) - the ifIndex in the linkUp trap may no longer exist in the ifTable. As per MIB As per MIB As per MIB As per MIB As per MIB Not Support As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB Not Support Not Support Not Support Not Support
Trap H3cFlhOperNotification H3cCfgManEventlog h3cCfgOperateCompletion h3csysClockChangedNotific ation h3cSysReloadNotification pririsingAlarm h3cEntityExtTemperatureTh resholdNotification h3cEntityExtCriticalTempera
MIB A3COM-HUAWEI-FLASH-MANMIB A3COM-HUAWEI-CONFIG-MA N-MIB A3COM-HUAWEI-CONFIG-MA N-MIB A3COM-HUAWEI-SYS-MAN-MI B A3COM-HUAWEI-SYS-MAN-MI B A3COM-HUAWEI-PERFORMA NCE-MIB A3COM-HUAWEI-ENTITY-EXTMIB A3COM-HUAWEI-ENTITY-EXT-
Comments AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB AS PER MIB Not support
Not support
tureThresholdNotification h3cEntityExtVoltageLowThr esholdNotification h3cEntityExtVoltageHighThr esholdNotification h3cEntityExtCpuUsageThre sholdNotfication h3cEntityExtMemUsageThr esholdNotification h3cEntityExtOperEnabled h3cEntityExtOperDisabled h3cFtmUnitIDChange h3cFtmUnitNameChange
MIB A3COM-HUAWEI-ENTITY-EXTMIB A3COM-HUAWEI-ENTITY-EXTMIB A3COM-HUAWEI-ENTITY-EXTMIB A3COM-HUAWEI-ENTITY-EXTMIB A3COM-HUAWEI-ENTITY-EXTMIB A3COM-HUAWEI-ENTITY-EXTMIB h3cFtmManMIB h3cFtmManMIB hwRstpEventsV2 Not support
Not support
As per MIB As per MIB As per MIB As per MIB The SNMP trap that is generated when an edged port of the BPDU-guard switch receives BPDU packets. The SNMP trap that is generated when a root-guard port receives a superior BPDU. The SNMP trap that is generated when the bridge is no longer the root bridge of the spanning tree. Another switch with higher priority has already been the root bridge. The SNMP trap that is generated when a loop-guard port is aged out. This event will be triggered whenever an aggregation changes its speed.(Not implemented now) This event will be triggered whenever any port in aggrerator is made inactive
hwRstpBpduGuarded
hwRstpBridgeLostRootPrim ary
hwAggPortInactiveNotificati on
A3COM-HUAWEI-LAG-MIB
hwAggPortInactiveNotificati on2 hwAggPortActiveNotification supplicantproxycheck hwBoaardTemperatureLowe r hwBoaardTemperatureFrom LowerToNormal hwBoaardTemperatureHigh er hwBoaardTemperatureForm HigherToNormal hwSubcardRemove hwSubcardInsert hwRequestLoading hwLoadFailure hwLoadFinished secureAddressLearned secureAddressLearned2 secureViolation2 secureViolation3 secureViolation4 secureLoginFailure secureLogon secureLogoff
A3COM-HUAWEI-LAG-MIB A3COM-HUAWEI-LAG-MIB A3COM-HUAWEI-8021PAE-MI B A3COM-HUAWEI-LswTRAP-MI B A3COM-HUAWEI-LswTRAP-MI B A3COM-HUAWEI-LswTRAP-MI B A3COM-HUAWEI-LswTRAP-MI B A3COM-HUAWEI-LswTRAP-MI B A3COM-HUAWEI-LswTRAP-MI B A3COM-HUAWEI-LswTRAP-MI B A3COM-HUAWEI-LswTRAP-MI B A3COM-HUAWEI-LswTRAP-MI B A3COM0458-PORT-SECURITY A3COM0458-PORT-SECURITY A3COM0458-PORT-SECURITY A3COM0458-PORT-SECURITY A3COM0458-PORT-SECURITY A3COM0458-PORT-SECURITY A3COM0458-PORT-SECURITY A3COM0458-PORT-SECURITY
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB Not support Not support Not support Not support Not support Not support Not support Not support
49.1 petthNotifications Name pethPsePortOnOffNotification pethMainPowerUsageOnNotifi cation pethMainPowerUsageOffNotifi cation Access NOTIFICATIO N-TYPE NOTIFICATIO N-TYPE NOTIFICATIO N-TYPE PDS No No No Description As per Mib As per Mib As per Mib
49.2 pethObjects
49.2.1 pethPsePortTable
PDS no no
Read-write Read-only
no no
Description As per mib This variable is global for stacks, and is started after the last port index of preceding unit. For example, the device supports 58 ports maximal per unit, this value starts form 1 on unit 1, from 59 on unit 2, from 117 on unit 3, and so on, 60 stands for unit 2 port 2, 118 stands for unit 3 port 2. As per mib Spare mode is not supported on the switch now. As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib
pethPsePortPairs pethPsePortDetectionStatus pethPsePortPowerPriority pethPsePortMPSAbsentCoun ter pethPsePortType pethPsePortPowerClassificati ons pethPsePortInvalidSignatureC ounter pethPsePortDEniedCounter pethPsePortOverLoadCounte r pethPsePortShortCounter
49.2.2 pethMainPseObjects
Read-write Read-only Read-write Read-only Read-write Read-only Read-only Read-only Read-only Read-only
no no no no no no no no no no
PDS No No No No No
Description As per Mib As per Mib As per Mib As per Mib As per Mib
Name
Access
PDS
Description
Not-accessible Read-write
No No
49.3 pethConformance
49.3.1 pethComplicance
Name pethCompliance
Access Not-accessible
PDS No
49.3.2 pethGroups
PDS No No No No No
Description As per Mib As per Mib As per Mib As per Mib As per Mib
50. A3COM-HUAWEI-POWER-ETHERNET-EXT-MIB
50.1 h3cPsePortTable Name H3cPsePortFaultDEscription H3cPsePortPeakPower H3cPsePortAveragePower H3cPsePortCurrentPower H3cPsePortPowerLimit Access Read-write read-write Read-write Read-only Read-write PDS No No No No No Description As per Mib As per Mib As per Mib As per Mib As per Mib
50.2 h3cMainPseTable Name H3cMainPsePowerlimit H3cMainPseAveragePower H3cMainPsePeakPower H3cMainGuaranteedPowerRem aining 50.3 Scalar objects Name H3cPseAutoDetectActive Access Read-write PDS No Description Now only support read-only Access Read-write read-write read-write Read-only PDS No No No No Description As per Mib As per Mib As per Mib As per Mib
51.1 QosProfObjects
51.1.1 QosProf 51.1.1.1 h3cQoSProfTable
Note:The row can not be modified, Reset the row must undo the row first; Create the row at least require: h3cQoSProfIndex, h3cQoSProfName, h3cQoSProfRowStatus Name h3cQoSProfIndex h3cQoSProfName h3cQoSProfActionNumber h3cQoSProfRowStatus Access not-accessible Read-Create Read-only Read-Create PDS No No No No Description As per Mib As per Mib As per Mib As per Mib
Note:The row can not be modified, Reset the row must undo the row first; Create the row at least repuire: h3cQoSTrafLmtProfIndex, h3cQoSTrafLmtActionIndex, h3cQoSTrafLmtDirection, h3cQoSTrafLmtTargetRateKbps, h3cQoSTrafLmtRowStatus, and choose one group of AclNum and AclRule, for example: (h3cQoSTrafLmtUserAclNum,h3cQoSTrafLmtUserAclRule), (h3cQoSTrafLmtIpAclNum,h3cQoSTrafLmtIpAclRule), (h3cQoSTrafLmtLinkAclNum,h3cQoSTrafLmtLinkAclRule), Name h3cQoSTrafLmtProfIndex h3cQoSTrafLmtActionIndex h3cQoSTrafLmtDirection h3cQoSTrafLmtUserAclNum h3cQoSTrafLmtUserAclRule h3cQoSTrafLmtIpAclNum h3cQoSTrafLmtIpAclRule h3cQoSTrafLmtLinkAclNum h3cQoSTrafLmtLinkAclRule h3cQoSTrafLmtTargetRateMb ps h3cQoSTrafLmtTargetRateKb Access not-accessib le not-accessib le Read-create Read-create Read-create Read-create Read-create Read-create Read-create Read-create Read-create PDS No No No No No No No No No No No Description As per Mib As per Mib As per Mib Not supported Not supported As per Mib 65535 is invalid value 0 is invlalid value 65535 is invalid vlaue Not supported As per Mib
ps h3cQoSTrafLmtPeakRate h3cQoSTrafLmtCIR h3cQoSTrafLmtCBS h3cQoSTrafLmtEBS h3cQoSTrafLmtPIR h3cQoSTrafLmtConformLocal Pre h3cQoSTrafLmtConformActio nType h3cQoSTrafLmtExceedAction Type h3cQoSTrafLmtExceedDscp h3cQoSTrafLmtExceedCos h3cQoSTrafLmtRowStatus h3cQoSTrafLmtConformCos h3cQoSTrafLmtConformDscp
51.1.2.2 h3cQoSTrafficPriorityTable
Read-create Read-create Read-create Read-create Read-create Read-create Read-create Read-create Read-create Read-create Read-create read-create read-create
No No No No No No No No No No No Yes Yes
Not supported Not supported Not supported Not supported Not supported Not supported Not supported As per Mib As per Mib Not supported As per Mib Not supported Not supported
Note:The row can not be modified, Reset the row must undo the row first; Create the row at least repuire: h3cQoSTrafPrioProfIndex, h3cQoSTrafPrioActionIndex, h3cQoSTrafPrioDirection, h3cQoSTrafPrioRowStatus, and choose one group of AclNum and AclRule, for example: (h3cQoSTrafLmtUserAclNum,h3cQoSTrafLmtUserAclRule), (h3cQoSTrafLmtIpAclNum,h3cQoSTrafLmtIpAclRule), (h3cQoSTrafLmtLinkAclNum,h3cQoSTrafLmtLinkAclRule), Name h3cQoSTrafPrioProfIndex h3cQoSTrafPrioActionIndex h3cQoSTrafPrioDirection h3cQoSTrafPrioUserAclNum h3cQoSTrafPrioUserAclRule h3cQoSTrafPrioIpAclNum h3cQoSTrafPrioIpAclRule h3cQoSTrafPrioLinkAclNum h3cQoSTrafPrioLinkAclRule h3cQoSTrafPrioDscp h3cQoSTrafPrioIpPre h3cQoSTrafPrioIpPreFromCo s h3cQoSTrafPrioCos Access not-accessib le not-accessib le Read-create Read-create Read-create Read-create Read-create Read-create Read-create Read-create Read-create Read-create Read-create PDS No No No No No No No No No No No No No Description As per Mib As per Mib As per Mib not supported not supported 0 is invalid value 65535 is invalid value 0 is invalid value 65535 is invalid value As per Mib As per Mib As per Mib As per Mib
h3cQoSTrafPrioCosFromIpPr e h3cQoSTrafPrioLocalPre h3cQoSTrafPrioPolicedServic eType h3cQoSTrafPrioPolicedServic eDscp h3cQoSTrafPrioPolicedServic eExp h3cQoSTrafPrioPolicedServic eCos h3cQoSTrafPrioPolicedServic eLoaclPre h3cQoSTrafPrioPolicedServic eDropPriority h3cQoSTrafPrioRowStatus
51.1.2.3 h3cQosTrafficFilterTable
No No No No No No No No No
As per Mib As per Mib not supported not supported not supported not supported not supported not supported As per Mib
Note:The row can not be modified, Reset the row must undo the row first, Create the row at least require: h3cQoSTrafFilterProfIndex, h3cQoSTrafFilterActionIndex, h3cQoSTrafFilterDirection, h3cQoSTrafFilterRowStatus, and choose one group of AclNum and AclRule, for example: (h3cQoSTrafLmtUserAclNum,h3cQoSTrafLmtUserAclRule), (h3cQoSTrafLmtIpAclNum,h3cQoSTrafLmtIpAclRule), (h3cQoSTrafLmtLinkAclNum,h3cQoSTrafLmtLinkAclRule), Name h3cQoSTrafFilterProfIndex h3cQoSTrafFilterActionIndex h3cQoSTrafFilterDirection h3cQoSTrafFilterUserAclNum h3cQoSTrafFilterUserAclRule h3cQoSTrafFilterIpAclNum h3cQoSTrafFilterIpAclRule h3cQoSTrafFilterLinkAclNum h3cQoSTrafFilterLinkAclRule h3cQoSTrafFilterRowStatus Access not-accessib le not-accessib le Read-create Read-create Read-create Read-create Read-create Read-create Read-create Read-create PDS No No No No No No No No No No Description As per Mib As per Mib As per Mib not supported not supported 0 is invalid value 65535 is invalid value 0 is invalid value 65535 is invalid value As per Mib
PDS No No No
51.1.3.2 h3cQoSProfPortMappingModeTable
PDS No No
51.1.3.3 h3cQoSProfDynPortMappingTable
Name h3cQoSProfDynPortMappingIfIndex h3cQoSProfDynPortMappingUserSr cMAC h3cQoSProfDynPortMappingUserN ame h3cQoSProfDynPortMappingUserIP Addr h3cQoSProfDynPortMappingUserV LANID h3cQoSProfDynPortMappingUserPr ofName 51.2 h3cQoSProfPortMappingTraps Name h3cQoSProfPortMappingError
PDS No No No No No No
Description As per Mib As per Mib As per Mib As per Mib As per Mib As per Mib
Access notified
PDS No
52. A3COM-HUAWEI-ENTRELATION-MIB
The MIB describes the relationship of two physical entities, including stacking ports and combo pairs. According to the relationship of combo pairs provided by this table, user can activate the port through the standard ifAdmin setting, no additional MIB will be used to change active port in a combo pair.
52.1 h3cEntRelationTable Name h3cEntRelationType Access not-accessible PDS No Description As per MIB
h3cEntityIndex h3cRelatedEntityIndex
not-accessible Read-only
No No
53. A3COM-HUAWEI-UI-MAN-MIB
This MIB is used to manage user interfaces.
1.1
Scalar Objects
1.2 Name
h3cUIMgtBasicGroup
Access
PDS
Description
NO Yes Yes NO
55.1
Name
Yes No Yes
Layer 4 redirection cache table access index As per MIB Port-Index of the port connecting Webcache device. As per MIB As per MIB As per MIB
55.2
Name
h3cL4RedirectTcpPort
not-accessible
Yes
h3cL4RedirectTcpPortRowStatus
This table is not supported by monza.
read-create
Yes
55.3
Name
h3cL4RedirectIpExclusionIpAddress
not-accessible
Yes
h3cL4RedirectIpExclusionMaskLen h3cL4RedirectIpExclusionRowStatus
It is not supported by monza.
read-create read-create
Yes Yes
Layer 4 redirection IP exclusion table access index As per MIB As per MIB
55.4
Name
No No No No No
As per MIB As per MIB As per MIB not support As per MIB. It stores the number of entries that still be added to the Redirection Vlan Table.
55.5
Name
h3cL4RedirectVlanID
not-accessible
Yes
h3cL4RedirectCacheRowStatus
read-create
Yes
Layer 4 redirection vlan table access index. It specifies the vlan ID of the packets which need to be redirected. As per MIB
57.
A3COM-HUAWEI-VRRP-EXT-MIB F1 product will support this mib at version 2 This MIB is used to manage user interfaces.
Access
PDS
Description
No Yes Yes
58. A3COM-HUAWEI-PROTOCOL-PRIORITY-MIB
The MIB is a priority configuration of protocol, includes type of protocol,type of priority,value of priority and RowStatus. The priority of protocol may be changed by CLI, SNMP or other ways defined as the MIB.
58.1 h3cProtocolPriorityTable
Name h3cPPriProtocolType
PDS Yes
Description
Type of protocol.
Type of priority. When setting and
h3cPPriPriorityType
Yes
Yes Yes
h3cPPriPriorityValue
h3cPPriRowStatus
read-create
modifing,h3cPPriPriorityType and h3cPPriPriorityValue must change at the same time. Value of priority. RowStatus, Now support three states:CreateAndGo, Active, Destroy.
59. A3COM-HUAWEI-OBJECT-INFO-MIB
This MIB is used to acquire some information from the agent. Before a NMS takes some actions, it is not sure whether the agent supports it or not. This MIB is used to solve this problem.
59.1 h3cObjectInfoTable
Name Access not-accessi ble not-accessi ble not-accessi ble Read-only PDS Description
No No
As per MIB As per MIB Not support. As an index, the value must be 0
No No
60. A3COM-HUAWEI-PORT-SECURITY-MIB
60.1 Scalar Objects
Name h3cSecurePortSecurityControl h3cSecurePortVlanMembershi pList h3cSecureRalmAuthDomain h3cSecureRalmAuthOfflineTim e h3cSecureRalmAuthServerTim eoutTime Access read-write accessible-fo r-notify read-write read-write PDS Current No Yes Yes Description As per MIB As per MIB As per MIB As per MIB
read-write
Yes
As per MIB
60.2 h3cSecureRalmGroup
h3cSecureRalmGroup contains objects related to the MAC-address security modes. Name h3cSecureRalmDefaultSession Time h3cSecureRalmHoldoffTime Access PDS Description
read-write read-write
Current Current
h3cSecureRalmReauthenticate
read-write
No
Writing a MAC address to this object causes an immediate cut connection of this address, If the user that used this MAC address not currently on line, it silently ignores the write. The read operation of this object is meaningless As per MIB As per MIB As per MIB As per MIB
60.3 h3cSecurePortTable
The h3cSecurePortTable defines the security status of each secure port. Each port can have a number of authorized MAC addresses Name Access PDS Description The value of continuousLearning will not be supported. h3cSecurePortMode read-write Current When we change the h3cSecurePortMode value, we should first change its value to noRestrictions, then continue to change it to the other value. As per MIB The value of allowDefaultAccess will not be supported. As per MIB As per MIB As per MIB
h3cSecureNeedToKnowMode
read-write
Current
h3cSecureIntrusionAction
read-write
Current
60.4 h3cSecureOUITable
The h3cSecureOUITable stores the OUI values for OUI based authorization. Name Access PDS Description As per MIB, and the value of the object is restricted within 1 and 16. As per MIB As per MIB
h3cSecureOUISlotIndex
Current
h3csecureOUI h3csecureOUIRowStatus
Current Current
60.5 h3cSecureBindingTable
This table stores the elements of a binding rule include the MAC addresses , the IP address and the port. Name Access PDS Description As per MIB , and the value of the object is restricted within 1 and 128. As per MIB As per MIB As per MIB As per MIB
h3cSecureBindingIndex
Current
60.6 h3cSecureAssignTable
Name Access PDS Description
read-only
No
h3cSecureAssignEnable
Set the value of the object true will cause the authorization information on the port be permitted. Set the value of the object is false will cause the authorization information on the port be ignored. The default value of this
read-only
yes
h3cSecureVlanAssignment
object is enable. The value contains two parts. The first part is the vlan number assigned by the radius sever, the second part is the tag information of the packet through this vlan on the port. U means untagged and T means tagged. For example: If the value of this object is 3U, 3 means that the radius sever assign vlan 3 on this port, U means the packet through vlan 3 is untagged.
61. A3COM-HUAWEI-RADIUS-MIB
A configuration management and statistical MIB, includes configuration of RADIUS Server, and statistics about Accounting Server which complements the IETF standard MIB. In addition, there are two traps supported to notify the RADIUS Servers down state. Note: Creating and deleting a row in either h3cRdInfoTable or h3cRdAccInfoTable will work on another table. That is, to create a new row in h3cRdInfoTable, a row with the same group name will appear in h3cRdAccInfoTable. To delete a row from h3cRdInfoTable, corresponding row in h3cRdAccInfoTable will be cleared away and vice versa.
61.1 h3cRdInfoTable
Name Access PDS Description
h3cRdGroupName
not-accessib le read-create read- create read- create read- create read- create read- create read- create read- create read- create read- create read- create read- create read- create
Yes
As per MIB Now only support read operation As per MIB As per MIB Now only support read operation As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
h3cRdPrimAuthIp h3cRdPrimUdpPort h3cRdPrimState h3cRdSecAuthIp h3cRdSecUdpPort h3cRdSecState h3cRdKey h3cRdRetry h3cRdTimeout h3cRdPrimAuthIpAddrType h3cRdPrimAuthIpAddr h3cRdSecAuthIpAddrType h3cRdSecAuthIpAddr
h3cRdServerType
read- create
Yes
standard(0) and extendedtype(4) are supported on Monza. As per MIB As per MIB As per MIB
Yes Yes No
61.2 h3cRdAccInfoTable
Name Access PDS Description
h3cRdAccGroupName h3cRdPrimAccIpAddrType h3cRdPrimAccIpAddr h3cRdPrimAccUdpPort h3cRdPrimAccState h3cRdSecAccIpAddrType h3cRdSecAccIpAddr h3cRdSecAccUdpPort h3cRdSecAccState h3cRdAccKey h3cRdAccRetry h3cRdAccTimeout
not-accessib le read- create read- create read- create read- create read- create read- create read- create read- create read- create read- create read- create
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB only standard(0) and extendedtype(4) are supported on Monza.
h3cRdAccServerType
read- create
Yes
read- create read- create read- create read- create read- create read- create read- create read- create read- create
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
61.3 h3cRadiusAccServerTable
Name Access PDS Description
h3cRadiusAccClientStartReq uests h3cRadiusAccClientStartRes ponses h3cRadiusAccClientInterimR equests h3cRadiusAccClientInterimR esponses h3cRadiusAccClientStopReq uests h3cRadiusAccClientStopRes ponses
read-only
No
As per MIB
read-only
No
As per MIB
read-only
No
As per MIB
read-only
No
As per MIB
read-only
No
As per MIB
read-only
No
As per MIB
As per MIB
As per MIB
62. A3COM-HUAWEI-NTP-MIB
62.1 hwNTPSystemMIBObjects
Name Access PDS Description
As per MIB As per MIB As per MIB Root Delay : This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in milliseconds. Note that this variable can take on both positive and negative values, depending on clock precision and skew. Root Dispersion : This is a signed fixed-point number indicating the maximum error relative to the primary reference source at the root of the synchronization subnet, in millisecondsecondss. Only positive values greater than zero are possible As per MIB
hwNTPSysRootdelay
read-only
yes
hwNTPSysRootdispersion
read-only
yes
hwNTPSysRefid
read-only
yes
hwNTPSysReftime hwNTPSysPoll hwNTPSysPeer hwNTPSysState hwNTPSysOffset hwNTPSysDrift hwNTPSysCompliance hwNTPSysClock hwNTPSysStabil hwNTPSysAuthenticate
read-only read-only read-only read-only read-only read-only read-only read-only read-only read-write
yes yes yes yes yes yes yes yes yes yes
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
62.2 hwNTPPeerTable
Name Access PDS Description
No No No No No No No No
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
hwNTPPeerHMode hwNTPPeerStratum hwNTPPeerPPoll hwNTPPeerHPoll hwNTPPeerPrecision hwNTPPeerRootDelay hwNTPPeerRootDispersion hwNTPPeerRefId hwNTPPeerRefTime hwNTPPeerOrg hwNTPPeerRec hwNTPPeerXmt hwNTPPeerReach hwNTPPeerValid hwNTPPeerTimer hwNTPPeerDelay hwNTPPeerOffset hwNTPPeerJitter hwNTPPeerDispersion hwNTPPeerKeyId hwNTPPeerFiltDelay hwNTPPeerFiltOffset
not-accessib le read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
No No No No No No No No No No No No No No No No No No No No No No
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
No No No No No
As per MIB As per MIB As per MIB As per MIB As per MIB Only support active createAndGo and createAndWait
hwNTPPeerRowStatus
read_create
No
63. A3COM-HUAWEI-USER-MIB
63.1 scalar objects Access read-only PDS No Description This object contains the maximum number of local users. This object contains the current number of local users. This object contains an appropriate value to be used for h3cUserIndex when creating entries in the h3cUserInfoTable. The value 0 indicates that no unassigned entries are available. To obtain the h3cUserIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
h3cUserCurrNum
read-only
No
h3cUserIndexIndi cator
read-only
No
63.2
h3cUserInfoTable
Name
Access
PDS
Description
The value could not be null, and could not be such stringsa,aland all(each character can be uppercase or lowercase). The value could not contain some characters, such as \, /, :, *, ?, , <, > and | etc. The value could not contain more than one @ characters, and if it contains @ character, the @ character could not be the last character. The length of the value must less than 80, and the length of the pure user name (i.e. the string before @ character) must be less than 55, and the length of the domain name (i.e. the string after @ character) must be less than 24. The number of the local users must be less than the maximum number. The user name which will be created must not be exist, and it is case sensitive.
h3cUserName
read-create
Yes
The length of the password must be less than 16. h3cUserPassword read-create Yes The default value is null. h3cAuthMode and h3cUserPassword must be set simultaneously. The value must be 0 or 7. O means the password is clean text. h3cAuthMode read-create Yes 7 means the encrypted text. password is
The default value is 0. h3cAuthMode and h3cUserPassword must be set simultaneously. The value range is from 0 to 3, and 0 is minimum, 3 is maximum. The default value is 0.
h3cUserLevel
read-create
Yes
Name
Access
PDS
Description The state of local user. The value must be 0 or 1. 0 means local user can execute any operations that he has privilege to do. 1 means local user can not execute any operations. The default value is 0.
h3cUserState
read-create
Yes
read-create
Yes
The status of this conceptual row. Now only support CreateAndGo and Destroy and Active. As per MIB
not-accessible
No
63.3
h3cUserAttributeTable Name Access PDS Description The maximum user number of current user who can access devices.
h3cAccessLimit
read-write
Yes
The value range is from 0 to 1024. The default value is 0, means no limit. Valid idle time out(second): 60..7200. The default value is 0, means disable idle time out. Set local user's ip address. The default value is 0-0-0-0. Set local user's ip address of network access server. The default value is 127.0.0.1, means local machine. Set local user's slot.
h3cIdleCut
read-write
Yes
h3cIPAddress
read-write
Yes
h3cNasIPAddress
read-write
Yes
h3cSlotNum
read-write
Yes
Name h3cSubSlotNum
Access read-write
PDS Yes
Description Set local user's sub-slot. The value range is from 0 to 15. The default value is 0. Set local user's port number.
h3cPortNum
read-write
Yes
The value range is from 0 to 255. The default value is 0. Set local user's mac address.
h3cMacAddress
read-write
Yes
The default value is 0-0-0, means the local user do not bind any mac address. Set local user's vlan id.
h3cVLan
read-write
Yes
The value range is from 0 to 4094. The default value is 0, means the local user is not in any vlan. The value must be 1 or 2. Setting this object to the value disable(1) has the effect of disabling the FTP service for the corresponding entry in the h3cUserAttributeTable. Setting this object to the value enable(2) has the effect of enabling the FTP service for the corresponding entry in the h3cUserAttributeTable. The default value is disable(1). Directory of FTP user. The default value is null, means if local user has the privilege of ftp service, the default ftp directory is flash:. The maximum length of the directory is 56.
h3cFtpService
read-write
Yes
h3cFtpDirectory
read-write
Yes
Name
Access
PDS
Description The value must be 1 or 2. Setting this object to the value disable(1) has the effect of disabling the lan access service for the corresponding entry in the h3cUserAttributeTable. Setting this object to the value enable(2) has the effect of enabling the lan access service for the corresponding entry in the h3cUserAttributeTable. The default value is disable(1). The value must be 1 or 2. Setting this object to the value disable(1) has the effect of disabling the SSH service for the corresponding entry in the h3cUserAttributeTable. Setting this object to the value enable(2) has the effect of enabling the SSH service for the corresponding entry in the h3cUserAttributeTable. The default value is disable(1). The value must be 1 or 2. Setting this object to the value disable(1) has the effect of disabling the TELNET service for the corresponding entry in the h3cUserAttributeTable. Setting this object to the value enable(2) has the effect of enabling the TELNET service for the corresponding entry in the h3cUserAttributeTable. The default value is disable(1).
h3cLanAccessSer vice
read-write
Yes
h3cSshService
read-write
Yes
h3cTelnetService
read-write
Yes
Name
Access
PDS
Description The value must be 1 or 2. Setting this object to the value disable(1) has the effect of disabling the terminal service for the corresponding entry in the h3cUserAttributeTable. Setting this object to the value enable(2) has the effect of enabling the terminal service for the corresponding entry in the h3cUserAttributeTable. The default value is disable(1).
h3cTerminalServi ce
read-write
Yes
64. A3COM-HUAWEI-SYSLOG-MIB
A Syslog MIB, includes Syslog management. All the configuration of the Syslog can be managed by the Syslog Mib.
64.1 Name
h3cSyslogState
read-write
No
enable Syslog
Syslog
or
disable
h3cSyslogMaxLoghost
read-only
No
The object shows the maximum number of rows in h3cLoghostTable The object shows the maximum number in h3cSyslogChannelTable. (The maximum number of channel is 10) The maximum number of messages that can be stored in logbuffer The maximum number of messages that can be stored in trapbuffer
h3cSyslogMaxChannel
read-only
No
h3cSyslogMaxLogbuffersize
read-only
No
h3cSyslogMaxtrapbuffersize
read-only
No
number
of
(The valid value of channel number in syslog mib is from 1 to h3cSyslogMaxChannel, while that in command line is from 0 to 9) The channel monitor number of
h3cSyslogMonitorChannel
read-write
No
(The valid value of channel number in syslog mib is from 1 to h3cSyslogMaxChannel, while that in command line is from 0 to 9) The channel number of snmp
h3cSyslogSnmpChannel
read-write
No
(The valid value of channel number in syslog mib is from 1 to h3cSyslogMaxChannel, while that in command line is from 0 to 9) The channel Logbuffer number of
h3cSyslogLogbufferChannel
read-write
No
(The valid value of channel number in syslog mib is from 1 to h3cSyslogMaxChannel, while that in command line is from 0 to 9) The number of log messages that can be stored in Logbuffer The channel Trapbuffer number of
h3cSyslogLogbufferSize
read-write
No
h3cSyslogTrapbufferChannel
read-write
No
(The valid value of channel number in syslog mib is from 1 to h3cSyslogMaxChannel, while that in command line is from 0 to 9) The number of trap messages that can be stored in Trapbuffer
h3cSyslogTrapbufferSize
read-write
No
h3cSyslogLoghostSourceInterf ace
read-write
No
The source interface which sends message to Loghost. All Loghosts use the same SourceInterface. Time stamp type of message sent to Loghost.
h3cSyslogLoghostTimestampT ype
The valid value of this node: read-write No date none datewithoutyear Time stamp message. type of log
The valid value of this node: h3cSyslogLogTimestampType read-write No date boot none Time stamp type of trap message. The valid value of this node: h3cSyslogTrapTimestampType read-write No date boot none Time stamp type of debug message. h3cSyslogDebugTimestampTy pe The valid value of this node: read-write No date boot none
64.2 Name
The index of h3cSyslogLogbufferTable. h3cLogbufferIndex not-accessibl e No In fabric, the value of this index is unit id, otherwise the value is 1 The number of log messages stored in Logbuffer The number of log messages read-only No overwritten in Logbuffer The number of log messages read-only No dropped in Logbuffer
h3cLogbufferCurrentMessages
read-only
No
h3cLogbufferOverwrittenMessa ges
h3cLogbufferDroppedmessage s
64.3 Name
h3cTrapbufferIndex
not-accessibl e
No
In fabric, the value of this index is unit id, otherwise the value is 1 The number of trap messages stored in Trapbuffer The number of trap messages
read-only
No
read-only
h3cTrapbufferDroppedmessag es
read-only
No dropped in Trapbuffer
64.4 Name
h3cSyslogLoghostTable Access
not-accessibl e
PDS
Description
As per MIB
h3cSyslogLoghostIndex
No
number
of
The valid value of this node: 1~h3cSyslogMaxChannel The ip address type (ipv4 or ipv6) of Loghost The valid value is ipv4
h3cSyslogLoghostIpaddressTy pe
read-create
No
h3cSyslogLoghostIpaddress
read-create
No
The ip address of Loghost As per MIB The valid value of this node: local0(0), local1(1), local2(2),
h3cSyslogLoghostFacility
read-create
read-create
No
The language of the message sent to the Loghost The status of this table entry
read-create
No
64.5 Name
h3cSyslogChannelIndex
not-accessibl e
The name of channel h3cSyslogChannelName read-write No The length of the channel name is from 1 to 30 The channel name must be different from each other.
64.6 Name
h3cSyslogModuleTable
This table is not available now and will be realized in the future
Access
not-accessibl e
PDS
No
Description
The index h3cSyslogModuletable The name of module of
h3cSyslogModuleIndex
h3cSyslogModuleName
read-only
No
64.7
h3cSyslogLogTable
This table is not available now and will be realized in the future
Name
Access
not-accessibl e
PDS
Description
The index of channel
h3cSyslogLogChannelIndex
No
h3cSyslogLogState
read-create
No
The switch state of log The level of log message The valid value of this node: emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), informational(7), debug(8) The status of this table entry
h3cSyslogLogLevel
read-create
No
h3cSyslogLogRowStatus
read-create
No
64.8 Name
h3cSyslogTrapTable
This table is not available now and will be realized in the future
Access
not-accessibl e
PDS
Description
The index of channel
h3cSyslogTrapChannelIndex
No
h3cSyslogTrapState
read-create
No
The switch state of trap The level of trap message The valid value of this node: emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), informational(7), debug(8) The status of this table entry
h3cSyslogTrapLevel
read-create
No
h3cSyslogTrapRowStatus
read-create
No
64.9 Name
h3cSyslogDebugTable
This table is not available now and will be realized in the future
Access
not-accessibl e
PDS
Description
The index of channel
h3cSyslogDebugChannelIndex
No
h3cSyslogDebugState
read-create
No
The switch state of debug The level of debug message The valid value of this node: emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), informational(7), debug(8)
h3cSyslogDebugLevel
read-create
No
h3cSyslogDebugRowStatus
read-create
No
65. A3COM-HUAWEI-DOMAIN-MIB
The MIB module is used for managing domain. 65.1 Scalar Objects
Name
h3cDomainDefault
Access
read-write
PDS
Current
Description
As per MIB
65.2 h3cDomainInfoTable
Name
PDS
Description
No Current Current
As per MIB As per MIB The range is from 1 to 4120 The vlan assignment mode. The mode SHOULD be the same as the mode of corresponding server. 1 (integer) - Integer Vlan assignment mode. 2 (string) - String Vlan assignment mode. 3 (vlanlist) - VLAN-List Vlan assignment mode. The integer. default value is
h3cDomainVlanAssignMode
read-create
Current
The 3rd mode is to support auto-vlan feature, which is started to support on the new software version (V3.3.2pxx). h3cDomainIdleCutEnable read-create Current As per MIB
As per MIB As per MIB As per MIB As per MIB As per MIB
65.3 h3cDomainSchemeTable
1) when a domain was created, the agent will create a row for accounting, a row for authentication, a row for authorization with the value of h3cDomainSch emeMode be local. 2) when change a row, the following objects must be specified.
h3cDomainSchemeMode h3cDomainSchemeAAAType h3cDomainSchemeAAAName h3cDomainSchemeAccessMode: Only support default, other values is invalid.if the item is not specified, the default value is default.
3) when create a new row, the following object must be specified,
h3cDomainSchemeMode h3cDomainSchemeRowStatus h3cDomainSchemeAAAType: h3cDomainSchemeAAAName h3cDomainSchemeAccessMode: Only support default, other values is invalid.if the item is not specified, the default value is default.
4) when a domain was destroyed, a row for accounting, a row for authentication, a row for authorization must be reserved. 5) Limitations
Limitation 1: The maximum row number of h3cDomainSchemeTable for each domain is 6. The maximum row number that have the same h3cDomainSchemeAAAType value is 2, and that two rows have the same h3cDomainSchemeAAAType and h3cDomainSchemeMode value is not allowed.
Limitation 2: The combinations of the AAAType and SchemeMode in the table below have been supported.The values set do not match the rules, return failure. The value TURE in the table below corresponds to the combination of the AAAType and SchemeMode supported. AAAType SchemeMode Radius Hwtacacs Local None Radius+Local Hwtacacs+Local TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUE Authentication Authorization Accounting
Limitation 3: It is prohibited to modify the value of h3cDomainSchemeAAAType of a row existed.The attempt of such modification will be a failure.
Name
PDS
Description
No Current Current
As per MIB As per MIB Not supported and the value will be ignored Not supported and the value will be ignored As per MIB Service Type of the server
h3cDomainSchemeAAAName
read-create
Current
If h3cDomainSchemeMode is radius or tacacs then the value of h3cDomainSchemeAAANam e must be valid scheme name, if the h3cDomainSchemeMode is none or local, the value of h3cDomainSchemeAAANam e will be a null string. The access mode of the domain scheme.Only support default
h3cDomainSchemeAccessMod e
read-create
Current
Name
PDS
Description
No
Not supported
66. A3COM-HUAWEI-MPM-MIB
66.1 Scalar Objects
Name h3cMPortGroupLimitMinNumb er h3cMPortGroupLimitMinNumb er Access PDS Description
read-only
Current
As per MIB
read-only
Current
As per MIB
66.2 h3cMPortGroupJoinTable
The h3cMPortGroupJoinTable is used to configure a port in a specified Vlan to join a multicast group. Name Access not-accessibl e not-accessibl e not-accessibl e read-create PDS Comments
Current
As per MIB
Current
As per MIB
Current Current
66.3 h3cMPortGroupTable
The h3cMPortGroupTable containing information about status of a port which join in a multicast group in the vlan. Name Access not-accessibl e read-only read-only PDS Comments
66.4 h3cMPortConfigTable
The h3cMPortConfigTable containing configuration about fast leave status, group limit number and group policy parameter on a port in the specified Vlan. Name Access not-accessibl e read-create PDS Comments
h3cMPortConfigVlanID h3cMPortGroupLimitNumber
Current Current
66.5 h3cHostStaticJoinTable
Name h3cHostStaticJoinVlanID h3cHostStaticJoinAddressType h3cHostStaticJoinAddress h3cHostStaticJoinStatus Access not-accessibl e not-accessibl e not-accessibl e read-create PDS Current Current Current Current Description As per mib As per mib As per mib As per mib
67. A3COM-HUAWEI-IF-EXT-MIB
67.1 Scalar Objects
Name
h3cIfStatGlobalFlowInterval
Access
read-write
PDS
Yes
Description
Not supported
67.2 h3cIfStatTable
The index of h3cIfStatTableTable is ifIndex.
Name
h3cIfStatFlowInterval h3cIfStatFlowInBits h3cIfStatFlowOutBits h3cIfStatFlowInPkts
Access
read-write read-only read-only read-only
PDS
No No No No
Description
Only support read operation As per mib As per mib As per mib
No No No
67.3 h3cIfSpeedStatTable
Name
h3cIfSpeedStatInterval h3cIfSpeedStatInPkts h3cIfSpeedStatOutPkts h3cIfSpeedStatInBytes h3cIfSpeedStatOutBytes
Access
read-write read-only read-only read-only read-only
PDS
No No No No No
Description
Only support read operation As per MIB As per MIB As per MIB As per MIB
68. BGP4-MIB
68.1 Scalar objects
Name bgpVersion{1.3.6.1.2.1.15.1} bgpLocalAs{1.3.6.1.2.1.15.2} bgpIdentifier{1.3.6.1.2.1.15.4} Access read-only read-only read-only PDS Yes yes no Description As per MIB. As per MIB. As per MIB.
68.2 bgpPeerTable{1.3.6.1.2.1.15.3}
Name bgpPeerIdentifier{1.3.6.1.2.1.15.3 .1.1} bgpPeerState{1.3.6.1.2.1.15.3.1.2 } bgpPeerAdminStatus{1.3.6.1.2.1. 15.3.1.3} bgpPeerNegotiatedVersion{1.3.6. 1.2.1.15.3.1.4} bgpPeerLocalAddr{1.3.6.1.2.1.15. 3.1.5} bgpPeerLocalPort{1.3.6.1.2.1.15. 3.1.6} bgpPeerRemoteAddr{1.3.6.1.2.1. Access read-only read-only read-only read-only read-only read-only read-only PDS no no no no no no yes Description As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB.
15.3.1.7} bgpPeerRemotePort{1.3.6.1.2.1.1 5.3.1.8} bgpPeerRemoteAs{1.3.6.1.2.1.15. 3.1.9} bgpPeerInUpdates{1.3.6.1.2.1.15. 3.1.10} bgpPeerOutUpdates{1.3.6.1.2.1.1 5.3.1.11} bgpPeerInTotalMessages{1.3.6.1. 2.1.15.3.1.12} bgpPeerOutTotalMessages{1.3.6. 1.2.1.15.3.1.13} bgpPeerLastError{1.3.6.1.2.1.15.3 .1.14} bgpPeerFsmEstablishedTransition s{1.3.6.1.2.1.15.3.1.15} bgpPeerFsmEstablishedTime{1.3. 6.1.2.1.15.3.1.16} bgpPeerConnectRetryInterval{1.3 .6.1.2.1.15.3.1.17} bgpPeerHoldTime{1.3.6.1.2.1.15. 3.1.18} bgpPeerKeepAlive{1.3.6.1.2.1.15. 3.1.19} bgpPeerHoldTimeConfigured{1.3 .6.1.2.1.15.3.1.20} bgpPeerKeepAliveConfigured{1.3 .6.1.2.1.15.3.1.21} bgpPeerMinASOriginationInterva l{1.3.6.1.2.1.15.3.1.22} bgpPeerMinRouteAdvertisementI nterval{1.3.6.1.2.1.15.3.1.23} bgpPeerInUpdateElapsedTime{1. 3.6.1.2.1.15.3.1.24}
read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-write read-write read-write read-write read-only
no yes no no no no no no no no no no no no no no no
As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. Only support read operation Only support read operation Only support read operation Only support read operation As per MIB.
68.3 bgpPathAttrTable{1.3.6.1.2.1.15.5}
Name bgpPathAttrPeer{1.3.6.1.2.1.15.5. 1.1} bgpPathAttrDestNetwork{1.3.6.1. 2.1.15.5.1.2} bgpPathAttrOrigin{1.3.6.1.2.1.15. 5.1.3} bgpPathAttrASPath{1.3.6.1.2.1.1 5.5.1.4} bgpPathAttrNextHop{1.3.6.1.2.1. 15.5.1.5} bgpPathAttrInterASMetric{1.3.6. 1.2.1.15.5.1.6} Access read-only read-only read-only read-only read-only read-only PDS no no no no no no Description As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB.
68.4 bgp4PathAttrTable{1.3.6.1.2.1.15.6}
Name bgp4PathAttrPeer{1.3.6.1.2.1.15.6 .1.1} bgp4PathAttrIpAddrPrefixLen{1. 3.6.1.2.1.15.6.1.2} bgp4PathAttrIpAddrPrefix{1.3.6. 1.2.1.15.6.1.3} bgp4PathAttrOrigin{1.3.6.1.2.1.1 5.6.1.4} bgp4PathAttrASPathSegment{1.3 .6.1.2.1.15.6.1.5} bgp4PathAttrNextHop{1.3.6.1.2.1 .15.6.1.6} bgp4PathAttrMultiExitDisc{1.3.6. 1.2.1.15.6.1.7} bgp4PathAttrLocalPref{1.3.6.1.2. 1.15.6.1.8} bgp4PathAttrAtomicAggregate{1. 3.6.1.2.1.15.6.1.9} bgp4PathAttrAggregatorAS{1.3.6 .1.2.1.15.6.1.10} bgp4PathAttrAggregatorAddr{1.3 .6.1.2.1.15.6.1.11} bgp4PathAttrCalcLocalPref{1.3.6. 1.2.1.15.6.1.12} bgp4PathAttrBest{1.3.6.1.2.1.15.6 .1.13} bgp4PathAttrUnknown{1.3.6.1.2. 1.15.6.1.14} Access read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only PDS no no no no No No No No no No No No No No Description As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB. As per MIB.
68.5 bgpTraps{1.3.6.1.2.1.15.7}
Name bgpEstablished{ 1.3.6.1.2.1.15.7.1 } bgpBackwardTransition{ 1.3.6.1.2.1.15.7.1.2} Access read-only read-only PDS No No Description SNMP V1 Trap SNMP V1 Trap
69. A3COM-HUAWEI-NQA-MIB
69.1 Scalar objects Name
hwNqaMIBVersion hwNqaAgentEnable hwNqaServerEnable
Access
read-only read-write read-write
PDS
Yes Yes Yes
Description
As per mib As per mib As per mib
hwNqaStatsMaxGroupNumber
read-only
Yes
As per mib
Access
read-create
PDS
No
Description
The range of hwNqaCtlTargetPort is [0 50000] The default value is 0. The range of hwNqaCtlSourcePort is [0 50000] The default value is 0. The range of hwNqaCtlTTL is [1, 255] If the corresponding hwNqaCtlCodecType is defined, the range of this object is [10,60000], the default value is 20. If the corresponding hwNqaCtlCodecType value is notDefined, the default value is 50, and the range of this object is [10, 1000]. If the corresponding hwNqaCtlCodecType is defined, the range of this object is [10, 60000], and the default value is 1000. If the corresponding hwNqaCtlCodecType value is notDefined, the default value is 10, and the range of this object is [10, 1000] As per mib As per mib As per mib As per mib As per mib The length of hwNqaCtlFtpOperationString is from 1 to 230 As per mib As per MIB As per MIB The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF(Calculated Planning Impairment Factor) values. the range of this object is [0, 20] To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe. probe. The corresponding pingCtlType shoulid be hwNqajitter first. If the
hwNqaCtlSourcePort
read-create
No
hwNqaCtlTTL hwNqaCtlJitterAdminInterval
read-create read-create
No No
hwNqaCtlJitterAdminNumPackets
read-create
No
No No No No No No
No No No No
hwNqaCtlCodecType
read-create
No
hwNqaCtlCodecType is modified, the configuration of the corresponding entry will be changed to default configuration.
Access
read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
PDS
No No No No No No No No No No No
Description
As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib The value of this object indicates the number of the packets that arrived after the timeout. As per mib As per mib Not support As per mib Not support As per mib Not support As per mib As per mib
No No No No No No No No No
Access
read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
PDS
No No No No No No No No No No No No
Description
As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib
hwNqaJitterStatsMaxOfPositivesD S hwNqaJitterStatsNumOfPositivesD S hwNqaJitterStatsSumOfPositivesD S hwNqaJitterStatsSum2PositivesDS hwNqaJitterStatsMinOfNegativesD S hwNqaJitterStatsMaxOfNegativesD S hwNqaJitterStatsNumOfNegatives DS hwNqaJitterStatsSumOfNegatives DS hwNqaJitterStatsSum2NegativesD S hwNqaJitterStatsPacketLossSD hwNqaJitterStatsPacketLossDS hwNqaJitterStatsAvePositivesSD hwNqaJitterStatsAveNegativesSD hwNqaJitterStatsAvePositivesDS hwNqaJitterStatsAveNegativesDS hwNqaJitterStatsPktLossUnknown hwNqaJitterStatsOperOfICPIF
read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
No No No No No No No No No No No No No No No No No
As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per mib As per MIB As per MIB As per MIB As per MIB As per MIB The ICPIF (Calculated Planning Impairment Factor) values for the latest jitter test. The MOS (Mean Opinion Score) values for the latest jitter test in hundreds.
hwNqaJitterStatsOperOfMOS
read-only
No
Access
not-accessible not-accessible
PDS
No No
Description
As per mib The range of hwNqaTcpServerPort is [0 50000] As per mib
hwNqaTcpServerRowStatus
read-create
No
Access
not-accessible not-accessible
PDS
No No
Description
As per mib The range of hwNqaTcpServerPort is [0 49999] As per mib
hwNqaUdpServerRowStatus
read-create
No
Access
not-accessible read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
PDS
No No No No No No No No No No No No No No No No No No No No
Description
As per MIB ipv4 is supported. This objects reports the IP address associated. As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB The value of this object reflects the number of the packets that arrived after the timeout. As per mib As per mib Not support Not support As per mib Not support As per mib Not support Not support As per mib Not support
hwNqaStatResRttSum hwNqaStatResNumOfDelaySD hwNqaStatResMinDelaySD hwNqaStatResMaxDelaySD hwNqaStatResSumDelaySD hwNqaStatResSum2DelaySD hwNqaStatResNumOfDelayDS hwNqaStatResMinDelayDS hwNqaStatResMaxDelayDS hwNqaStatResSumDelayDS hwNqaStatResSum2DelayDS
read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
No No No No No No No No No No No
Access
not-accessible read-only read-only read-only read-only
PDS
No No No No No
Description
As per MIB As per MIB As per MIB As per MIB As per MIB
hwNqaStatJitterSumOfSquarePosS D hwNqaStatJitterMinOfNegSD hwNqaStatJitterMaxOfNegSD hwNqaStatJitterNumOfNegSD hwNqaStatJitterSumOfNegSD hwNqaStatJitterSumOfSquareNeg SD hwNqaStatJitterMinOfPosDS hwNqaStatJitterMaxOfPosDS hwNqaStatJitterNumOfPosDS hwNqaStatJitterSumOfPosDS hwNqaStatJitterSumOfSquarePos DS
read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
No No No No No No No No No No No
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB
hwNqaStatJitterMinOfNegDS hwNqaStatJitterMaxOfNegDS hwNqaStatJitterNumOfNegDS hwNqaStatJitterSumOfNegDS hwNqaStatJitterSumOfSquareNeg DS hwNqaStatJitterPacketLossSD hwNqaStatJitterPacketLossDS hwNqaStatJitterAvePosSD hwNqaStatJitterAveNegSD hwNqaStatJitterAvePosDS hwNqaStatJitterAveNegDS hwNqaStatJitterPktLossUnknown hwNqaStatJitterMaxOfICPIF hwNqaStatJitterMinOfICPIF hwNqaStatJitterMaxOfMOS
read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only read-only
No No No No No No No No No No No No No No No
As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB As per MIB The maximum of all ICPIF values in a statistic cycle for jitter test. The minimum of all ICPIF values in a statistic cycle for jitter test. The maximum of all MOS values in a statistic cycle for jitter test in hundreds.
hwNqaStatJitterMinOfMOS
read-only
No
The minimum of all MOS values in a statistic cycle for jitter test in hundreds.
69.9 hwNqaStatisticsCtlTable
Name
hwNqaCtlStatisticsInterval
Access
read-create
PDS
No
Description
The length of hwNqaCtlStatisticsInterval is from 1 to 1440 The length of hwNqaCtlStatisticsGroupNumber is from 1 to hwNqaCtlMaxGroupNumber As per MIB
hwNqaCtlStatisticsGroupNumber
read-create
No
hwNqaCtlStatisticsKeptTime
read-create
No
hwNqaCtlBeginTime
read-create
No
hwNqaCtlLifeTime
read-create
No
The time when the test will starts. The default value is all zero. The configuration of all zero means that if hwNqaCtlLifeTime is not zero the test will start right now. But if the value of hwNqaCtlLifeTime is not zero, it can not be configured. The time that the test lasts. The default value is zero. If it isn't configured, the test would never begin. And the value of zero means cancel the configuration. Notes: If the value of this node is not zero, the value of all the nodes in pingCtlTable except for pingCtlOwnerIndex, pingCtlTestName, pingCtlDescr cant be modified. And hwNqaCtlTable, hwNqaStatisticsCtlTable also cant be modified.
Notes: If nodes in pingCtlTable except for pingCtlOwnerIndex, pingCtlTestName, pingCtlDescr and all the nodes except for hwNqaCtlHistoryKeptTime and hwNqaCtlHistoryEnable in hwNqaCtlTable is modified , all the history records and statistic records will be deleted. If the value of pingCtlAdminStatus in pingCtlTable is 1, the nodes in pingCtlTable except for pingCtlOwnerIndex, pingCtlTestName, pingCtlDescr cant be modified. And hwNqaCtlTable, hwNqaStatisticsCtlTable also cant be modified. The return value of Generic Error means some other node is not SET or the value cant be modified in such configuration circumstance.
Access
accessible-fornotify accessible-fornotify accessible-fornotify read-create read-create
PDS
No No No No No
Description
As per mib As per mib As per mib As per mib The value range is: [0, 60000]: If the hwNqaReactionCheckedElement is probetime, jitterrtt, jittersd, or jitterds The unit is millisecond. [1, 100]: If the hwNqaReactionCheckedElement is icpif [1, 500]: If the hwNqaReactionCheckedElement is mos The value of this object is zero if the hwNqaReactionCheckedElement is specified as probefailure, jitterpacketloss. The value range is: [0, 60000]: If the hwNqaReactionCheckedElement is probetime, jitterrtt, jittersd, or jitterds The unit is millisecond. [1, 100]:If the hwNqaReactionCheckedElement is icpif [1, 500]: If the hwNqaReactionCheckedElement is mos The value of this object is zero if the hwNqaReactionCheckedElement is specified as probefailure, jitterpacketloss. invalid (0): if the hwNqaReactCheckedElement is icpif or mos ,the value of this object is invalid. The value of invalid for this object means invalid value. average (1):it is valid only if the hwNqaReactCheckedElement is specified as probetime, jitterrtt, jittersd and jitterds. consecutive (2): it is valid only if hwNqaReactCheckedElement is specified as probetime, probefailure accumulative (3): It is valid only if hwNqaReactCheckedElement is specified as probetime, probefailure, jitterrtt, jittersd,
hwNqaReactThresholdLowerLimit
read-create
No
hwNqaReactThresholdType
read-create
No
hwNqaReactThresholdConsecNum
read-create
No
hwNqaReactThresholdAccumNum
read-create
No
hwNqaReactActionType
read-create
No
No No No No
jitterpacketloss and jitterds. The value range is: [1, 15]: if the hwNqaReactCheckedElement is probetime and probefailure The value of zero means the hwNqaReactThresholdType is not consecutive. The value range is: [1, 15]: If the hwNqaReactCheckedElement is probetime and probefailure [1, 15000]: If the pingCtlType of the test is hwNqajitter but hwNqaCtlCodecType is notDefined(1)., and the hwNqaReactThresholdType is accumulative (3) [1..60000]: If the pingCtlType of the test is hwNqajitter ,hwNqaCtlCodecType is g711Alaw(2) or g711Ulaw(3) or g729A(4), and the hwNqaReactThresholdType is accumulative (3) The value of zero means the hwNqaReactThresholdType is not accumulative. The value now only support none(1) and trapOnly(2) As per mib As per mib As per mib As per mib
Note: hwNqaReactionTable only support row creation and row deletion, no table item could be modified. One row is specified as one reaction set. The row creation just support multiple variables bingding way. The multiple variables which shoule be binded in different reaction type are desribed as follows. Detecting ping probetime 69.10.1 1.1 average types
Object Name
hwNqaReactOwnerIndex hwNqaReactTestName hwNqaReactItemIndex hwNqaReactCheckedElement hwNqaReactThresholdUpperLimit hwNqaReactThresholdLowerLimit hwNqaReactThresholdType hwNqaReactActionType hwNqaReactRowStatus
Object Value
Index Index index probetime(1) As need As need average(1) none(0) or trapOnly(1) Createandgo(4)
69.10.2
Object Name
hwNqaReactOwnerIndex hwNqaReactTestName hwNqaReactItemIndex hwNqaReactCheckedElement hwNqaReactThresholdUpperLimit hwNqaReactThresholdLowerLimit hwNqaReactThresholdType hwNqaReactThresholdAccumNum hwNqaReactActionType hwNqaReactRowStatus 69.10.3 1.3 consecutive ttype
Object Value
Index Index index probetime(1) As need As need accumulative (3) As need none(0) or trapOnly(1) Createandgo(4)
Object Name
hwNqaReactOwnerIndex hwNqaReactTestName hwNqaReactItemIndex hwNqaReactCheckedElement hwNqaReactThresholdUpperLimit hwNqaReactThresholdLowerLimit hwNqaReactThresholdType hwNqaReactThresholdConsecNum hwNqaReactActionType hwNqaReactRowStatus Detecting probe failure times 69.10.4 2.1 accumulative types
Object Value
Index Index index probetime(1) As need As need consecutive(2) As need none(0) or trapOnly(1) Createandgo(4)
Object Name
hwNqaReactOwnerIndex hwNqaReactTestName hwNqaReactItemIndex hwNqaReactCheckedElement hwNqaReactThresholdType hwNqaReactThresholdAccumNum hwNqaReactActionType hwNqaReactRowStatus 69.10.5 2.2 consecutive type
Object Value
Index Index index probefailure(2) accumulative (3) As need none(0) or trapOnly(1) Createandgo(4)
Object Name
hwNqaReactOwnerIndex
Object Value
Index
hwNqaReactTestName hwNqaReactItemIndex hwNqaReactCheckedElement hwNqaReactThresholdType hwNqaReactThresholdConsecNum hwNqaReactActionType hwNqaReactRowStatus Detecting Jitter RTT 69.10.6 3.1 average type
Object Name
hwNqaReactOwnerIndex hwNqaReactTestName hwNqaReactItemIndex hwNqaReactCheckedElement hwNqaReactThresholdUpperLimit hwNqaReactThresholdLowerLimit hwNqaReactThresholdType hwNqaReactActionType hwNqaReactRowStatus 69.10.7 3.2 accumulative type
Object Value
Index Index index jitterrtt(3) As need As need average(1) none(0) or trapOnly(1) Createandgo(4)
Object Name
hwNqaReactOwnerIndex hwNqaReactTestName hwNqaReactItemIndex hwNqaReactCheckedElement hwNqaReactThresholdUpperLimit hwNqaReactThresholdLowerLimit hwNqaReactThresholdType hwNqaReactThresholdAccumNum hwNqaReactActionType hwNqaReactRowStatus Detecting Jitter packet loss number 69.10.8 4.1 accumulative types
Object Value
Index Index index jitterrtt(3) As need As need accumulative (3) As need none(0) or trapOnly(1) Createandgo(4)
Object Name
hwNqaReactOwnerIndex hwNqaReactTestName hwNqaReactItemIndex hwNqaReactCheckedElement
Object Value
Index Index index jitterpacketloss(4)
hwNqaReactThresholdType hwNqaReactThresholdAccumNum hwNqaReactActionType hwNqaReactRowStatus Detecting jitter values from destination to source 69.10.9 5.1 average type
Object Name
hwNqaReactOwnerIndex hwNqaReactTestName hwNqaReactItemIndex hwNqaReactCheckedElement hwNqaReactThresholdUpperLimit hwNqaReactThresholdLowerLimit hwNqaReactThresholdType hwNqaReactActionType hwNqaReactRowStatus 69.10.10 5.2 accumulative types
Object Value
Index Index index jitttersd(5) As need As need average(1) none(0) or trapOnly(1) Createandgo(4)
Object Name
hwNqaReactOwnerIndex hwNqaReactTestName hwNqaReactItemIndex hwNqaReactCheckedElement hwNqaReactThresholdUpperLimit hwNqaReactThresholdLowerLimit hwNqaReactThresholdType hwNqaReactThresholdAccumNum hwNqaReactActionType hwNqaReactRowStatus Detecting jitter values from destination to source 69.10.11 6.1 average type
Object Value
Index Index index jitttersd(5) As need As need accumulative (3) As need none(0) or trapOnly(1) Createandgo(4)
Object Name
hwNqaReactOwnerIndex hwNqaReactTestName hwNqaReactItemIndex hwNqaReactCheckedElement hwNqaReactThresholdUpperLimit hwNqaReactThresholdLowerLimit hwNqaReactThresholdType
Object Value
Index Index index jittterds(6) As need As need average(1)
Object Name
hwNqaReactOwnerIndex hwNqaReactTestName hwNqaReactItemIndex hwNqaReactCheckedElement hwNqaReactThresholdUpperLimit hwNqaReactThresholdLowerLimit hwNqaReactThresholdType hwNqaReactThresholdAccumNum hwNqaReactActionType hwNqaReactRowStatus Detecting Jitter ICPIF value
Object Value
Index Index index jittterds(6) As need As need accumulative (3) As need none(0) or trapOnly(1) Createandgo(4)
Object Name
hwNqaReactOwnerIndex hwNqaReactTestName hwNqaReactItemIndex hwNqaReactCheckedElement hwNqaReactThresholdUpperLimit hwNqaReactThresholdLowerLimit hwNqaReactActionType hwNqaReactRowStatus detecting Jitter MOS value
Object Value
Index Index index icpif(7) As need As need none(0) or trapOnly(1) Createandgo(4)
Object Name
hwNqaReactOwnerIndex hwNqaReactTestName hwNqaReactItemIndex hwNqaReactCheckedElement hwNqaReactThresholdUpperLimit hwNqaReactThresholdLowerLimit hwNqaReactActionType hwNqaReactRowStatus
Object Value
Index Index index mos(8) As need As need none(0) or trapOnly(1) Createandgo(4)
Access
not-accessible not-accessible
PDS
No No
Description
As per mib As per mib
No No No No
70. A3COM-HUAWEI-LPBKDT-MIB
70.1 h3cLpbkdtObjects
Name
h3cLpbkdtVlanID
Access
accessible-fornotify
PDS
No
Description
The ID of VLAN
71. A3COM-HUAWEI-LLDP-EXT-MIB
Extended LLDP management MIB is complementary MIB with IEEE802.1ab standard MIB for implementation. And this private extended MIB is designed to fulfil three following management requirements: (1)Globally enable/disable LLDP entity. (2)Globally enable/disable CDP compliance of LLDP. (3)Port-based CDP Compliance controlling of LLDP.
Access
PDS
Description
read-write read-write
Curren t Curren t
71.2 h3clldpPortConfigTable
Access
PDS
Description
Curren t Curren t
USR-USER-MAN-MIB Cip-MIB A3COM0012-TRAPTABLE2 A3COM-SWITCHINGSYSTEMS-MIB STACK-MIB CB9000-EME-MIB A-3COM-SWITCHINGSYSTEMS-MIB SRAP-WCM-MIB Stack Configuration MIB - 3Com352 A3COMQOSPROFILES-MIB(3FC410) 3FC-469 mib A3COM-SWITCHINGSYSTEMS-MIB A3COM0353-SWITCH-EXTENSION, A3COM0019-RMON-REMOTE-POLL,
A3COM0420-SWITCH-EXTENSION-LACP-ENABLE A3COM0353-SWITCH-EXTENSION
Acl
Qo
L2 traffic classification based on source/destination mac address or vlan or port L3/L4 traffic classification based on source/destination ip address or tcp/udp port or protocol type Support permit rule and deny rule Support egress rate-limit per port
s Support ingress/egress traffic-limit per flow The min bandwidth for rate control is 64kbps and the step is 64kbps Port mirroring with only one monitor-port and all the other port as mirroring-port Traffic mirroring The traffic to cpu mirroring Queue-schedule with SP/WRR mode Priority remaping between 802.1p and dscp Priority remarking 802.1p or dscp based on traffic Support tail drop Support traffic redirection Support traffic statistics Support 8 egress queues
About resource restrictions please refer to product specification section 5.1 performance summary table.
MIB Group system system system system snmp h3cFtmManMI B h3cFtmManMI B ospfIfTable ospfIfTable ospfIfTable ospfIfTable ospfIfTable ospfIfTable ospfIfMetricTab le hwLswIgmpsno opingMib hwLswIgmpsno opingMib hwLswIgmpsno opingMib hwLswIgmpsno opingMib
Object sysName sysContact sysLocation sysDescr snmpEnableAuthenTra ps h3cFtmAuthMode h3cFtmAuthValue ospfIfRtrPriority ospfIfTransitDelay ospfIfRetransInterval ospfIfHelloInterval ospfIfRtrDeadInterval ospfIfPollInterval ospfIfMetricValue hwIgmpSnoopingStatu s hwIgmpSnoopingRoute rPortAge hwIgmpSnoopingResp onseTime hwIgmpSnoopingHostT ime
Default Value 5500G-EI 3Com Switch 5500G-EI Disable(2) ftm_none(0) NULL 1 1 5 The default value of the interface which is Nbma or ptmp is 30,the others is 10 The default value of the interface which is Nbma or ptmp is 120,the others is 40 The default value of the interface which is Nbma or ptmp is 120,the others is 40 10^8/ifspeed The default setting is disabled The default value is 260 seconds The default value is 10 seconds The default value is 260 seconds
h3cFlhOperSourceFile <filename> as in the h3cSysImageTable h3cFlhOperRowStatus createAndGo(4) 3.4 poll the h3cFlhOperStatus item untill it is not opInProgress(1). If h3cFlhOperStatus is an error, we fail with an error. 3.5 remove the entry by setting h3cFlhOperRowStatus to destroy(6) 4. each new agent file can now be uploaded to the device: 4.1 trigger the upload by adding a row into the h3cFlhOperTable using the following attributes: h3cFlhOperIndex <index_for_unit> (base this on the existing agents for each unit and increment the index) h3cFlhOperType net2FlashWithErase(1) h3cFlhOperProtocol tftp(2) h3cFlhOperServerAddress <local_ip> h3cFlhOperSourceFile <filename> h3cFlhOperRowStatus createAndGo(4) 4.2 poll the h3cFlhOperStatus entry for the row untill it is no longer opInProgress(1) 4.2.2 if h3cFlhOperStatus is a failure, fail with an error 4.3 remove the entry by setting h3cFlhOperRowStatus to destroy(6) 5. find the h3cSysImageIndex of all the new images in the h3cSysImageTable by checking h3cSysImageName. 6. once all required agent files are uploaded to each unit, set the h3cSysImageType value of the new image to main(1) 8. Find the h3cSysReloadTag with ("3Com-Network-Supervisor") 9. set h3cSysReloadAction to reloadAtOnce(3) to reload the new configuration. 10. poll entPhysicalSoftwareRev for the stack until it matches the agent version expected from the new agent. 11. Check the stack remains intact by ensuring the serial numbers of each unit are still correct, if not then fail the operation. 75.1.2 The MIBs concerned: HUAWEI-FLASH-MAN-MIB HUAWEI-SYS-MAN-MIB ENTITY-MIB 75.1.3 Functions of the MIBs: Please refer to the description above. 75.1.4 An example: You may want to upgrade an XRN device depicted in the following figure (figure 44-1).
figure 44-1
When 3NS wants to update agent, it should follow the steps: 1, 3NS first walks h3cSysImageTable to get which file is main image file and which one is backup image file. Assume that s4a03_01_00s56c01.app is main image and s4a03_01_00s56c02.app is backup image. The value of h3cSysImageType is main means this file will be the active file after reboot. The value of it is backup means this file is the backup file, and when the main file starts failed, this file will start instead. The value of h3cSysImageType is none means this file is neither main nor backup and just a normal image file. For F1 products, only main and none values of h3cSysImageType are supported. The maximum entries in this table are limited by the space of flash. Now our image file size is about 5.6MB, and will be bigger in future. So for a flash with 32MB, there are normally 5 image files at most in the flash. Thus h3cSysImageTable has about 5*4=20 entries. Below table lists the four units entries. Asume entPhysicalIndex of unit1 is 2, of unit2 is 105, of unit3 is 208, of unit4 is 311.
h3cSysImageName. 131073 h3cSysImageSize. 131073 h3cSysImageLocation. 131073 h3cSysImageType. 131073 h3cSysImageName. 131074 h3cSysImageSize. 131074 h3cSysImageLocation. 131074 h3cSysImageType. 131074 h3cSysImageName. 131075 h3cSysImageSize. 131075 h3cSysImageLocation. 131075 h3cSysImageType. 131075 h3cSysImageName. 6881281 h3cSysImageSize. 6881281 h3cSysImageLocation. 6881281 h3cSysImageType. 6881281 h3cSysImageName. 688122 h3cSysImageSize. 6881282 h3cSysImageLocation. 6881282
s4a03_01_00s56c01.app 654321 unit1>flash:/ Main s4a03_01_00s56c02.app 123456 unit1>flash:/ None yyy( other files name) 666666 unit1>flash:/ None s4a03_01_00s56c03.app 654321 unit2>flash:/ Main s4a03_01_00s56c04.app 123456 unit2>flash:/
h3cSysImageType. 6881282 h3cSysImageName. 6881283 h3cSysImageSize. 6881283 h3cSysImageLocation. 6881283 h3cSysImageType. 6881283 h3cSysImageName. 13631489 h3cSysImageSize. 13631489 h3cSysImageLocation.13631489 h3cSysImageType. 13631489 h3cSysImageName. 13631490 h3cSysImageSize. 13631490 h3cSysImageLocation.13631490 h3cSysImageType. 13631490
None yyy( other files name) 666666 unit2>flash:/ None s4a03_01_00s56c05.app 654321 unit3>flash:/ Main s4a03_01_00s56c06.app 123456 unit3>flash:/ None
h3cSysImageName. 13631491 h3cSysImageSize. 13631491 h3cSysImageLocation.13631491 h3cSysImageType. 13631491 h3cSysImageName. 20381697 h3cSysImageSize. 20381697 h3cSysImageLocation.20381697 h3cSysImageType. 20381697 h3cSysImageName. 20381698 h3cSysImageSize. 20381698 h3cSysImageLocation.20381698 h3cSysImageType. 20381698 h3cSysImageName. 20381699 h3cSysImageSize. 20381699 h3cSysImageLocation.20381699
yyy( other files name) 666666 unit3>flash:/ None s4a03_01_00s56c07.app 654321 unit4>flash:/ Main s4a03_01_00s56c08.app 123456 unit4>flash:/ None yyy( other files name) 666666 unit4>flash:/
h3cSysImageType. 20381699
None
+++++++++++++++++++++++++++++++++ 3, 3NS uses h3cFlhOperTable to download the new image file to the fabric and overwrites the existed image file (here existed file is s4a03_01_00s56c02.app) by setting h3cFlhOperDestinationFile to that existed file name.
Here the h3cFlhOperIndex with 65537 means that the image file of s551_02.app will be downloaded and renamed as s4a03_01_00s56c02.app to all the units of the fabric (stack). So for F1 products, there is also a rule for h3cFlhOperIndex just as following: 31 15 0
++++++++++++++++++++++++++++++++
4, During downloading, 3NS will poll h3cFlhOperStatus while it is opInProgress. When h3cFlhOperStatus is opSuccess, this indicates that the agent has copied the image to each unit as it requires. If h3cFlhOperStatus returns an error, it means that the operation has failed and 3NS will not activate the new image file or attempt to reboot the default agent. The agent should delete all the newly downloaded files from all units if a copy fails from one unit to another. 5, If succeed, 3NS sets the new downloaded image file to main using h3cSysImageType for each unit. 6, The device creates automatically a permanent entry in the h3csysReloadScheduleTable for the main image for every unit when h3cSysImageType is set to main.
H3cSysReloadEntity.1 h3cSysReloadEntity.2 h3cSysReloadEntity.3 h3cSysReloadEntity.4 h3cSysReloadCfgFile.1 h3cSysReloadCfgFile.2 h3cSysReloadCfgFile.3 H3cSysReloadCfgFile.4 H3cSysReloadImage.1 H3cSysReloadImage.2 H3cSysReloadImage.3 H3cSysReloadImage.4 H3cSysReloadReason.1 H3cSysReloadReason.2 H3cSysReloadReason.3 H3cSysReloadReason.4 H3cSysReloadScheduleTime.1 H3cSysReloadScheduleTime.2 H3cSysReloadScheduleTime.3
2(unit1) 105(unit2) 208(unit3) 311(unit4) 0 0 0 0 131074 6881282 13631490 20381698 Upgrade Upgrade Upgrade Upgrade
Also a default tag must exist. 3NS will not create it. This tag is like as following:
H3cSysReloadScheduleTagList
7, 3NS need not read the currently running image name in H3cSysCurTable to find out which file is main because it gets the current main image from h3cSysImageTable. 8, 3NS then will ask the agent to reload the default image. It sets the reload action to reboot at once for the stack.
H3cSysReloadTag.0 H3cSysReloadAction.0
3Com-Network-Supervisor reloadAtOnce(3)
3NS waits for device to restart. It then matches the version number in the filename it has just downloaded to the version number reported by entPhysicalSoftwareRev of the stack. This MIB changes to the new version number when all the units in the fabric have rebooted and are running the same version. 3NS should check the entity table to ensure stack integrity. (Question) When upgrading is failed, how we deal with this situation? How 3NS communicates with the stack. 3NS derives the version number from the filename. There must be agreement between 3NS, the filename and the value returned by the device. In the above example, the filename is s551_02.app, so the agent version returned by hwSoftwareversion must be 1.02. 3fc-518 and 519 describe the format and need to be supported by the device, the version numbering specified in the MIB companion to show it is clearly understood. When the two versions match exactly, 3NS will report to the user that the upgrade has been successful.
75.2.2 Functions of the MIBs: Please refer to the description above. 75.2.3 An example: Here we will discuss the action of backup and restore. When using h3cCfgOperateTable, the first two bytes of h3cCfgOperateIndex are specified to be the entPhysicalIndex of the unit. For example, all the operation on the unit1 (considering the entPhysicalIndex of which is 2) must specify the value of the h3cCfgOperateIndex with 0x0002xxxx. The operation on the whole fabric must specify the value of hwCfgOperateIndex with 0x0001xxxx (considering the entPhysicalIndex of which is 1). The following table is the result of a set operation of creating an instance in the entry. The operation will restore the configuration stored in BackupCfg.cfg from the server (10.153.70.110) to the unit1 by using tftp.
To save the configuration of the fabric from memory to flash, the following is an example (with the index of 0x0000001).
With the result of this operation, an instance will be added to the hwSysImageTable of HUAWEI-SYS-MAN-MIB. Getting the fabric configuration file from device (backup saved configuration) (with the index of 0x0000002):
In the old version, only tftp protocol supports to backup & restore the whole fabric. In the new version, both TFTP and FTP protocols support.
Comments: all the mibs are based on the current platform not the latest RFC. All devices must be tested for SNMP conformance before release to 3Com.
Comments: ok All Huawei private MIBs to be under the a3Com.45.1 (jv-mib.huawei) branch.
Comments: ok All Huawei private MIBs must contain a complete DESCRIPTION in English for each object
Comments: not all private mibs contains a complete description. All MIBs must be compiled with HP Openview.
Comments: ok Devices must conform to 3fc-510 and support as many of the IEEE standard MIBs/3Com 3fcs/Huawei MIBs specified there as possible
Where an 3fc-510 MIB does not exist on a device, this MIB should be implemented in preference to creating a new private MIB
Comments: if the mib defined in 3fc-510 is supported it is listed in section 44 Where new private MIBs are used, the same private MIB should be implemented on all JV-CO devices (where applicable)
[Quidway]display version Huawei Versatile Routing Platform Software VRP (R) Software, Version COMWAREV300R002B01D001(CN), RELEASE 0012(ALL) Copyright (c) 2002-2004 HUAWEI TECH CO., LTD. Quidway S5600 uptime is 0 week,6 days,23 hours,57 minutes Quidway S5628 with 1 MIPS Processor 128M 16M bytes SDRAM bytes Flash Memory
Config Register points to FLASH Hardware Version is REV.B CPLD Version is 001 Bootrom Version is 16777216 [Subslot 0] 24 GE Hardware Version is REV.B
(b) The trap source will be set to to the IP address which was used to make the SNMP request; Comments: the trap source must be specified by cli commands.
(c) The CLI and the MIB will remain in sync in V1 version, because we can adds a new target-host in V2, V3 version via the CLI. If the user adds a new target-host in V1 version via the CLI, a new entry is added to the TrapDest table. Comments: not sure about it. Confirm with bedrock mib team.
(d) The user can manually disable trap groups using the CLI. Command: [Router]undo snmp trap enable Comments: agree
In addition, We add a node to save current configuration Comments: the flash man mib supports it.
Comments: ok Support router.module.moduletable in all routers (Module Table may be replaced by ENTITY_MIB on new devices, but module table will continue to be supported on existing devices)
Comments: mau-mib is not supported, refer to section 14. Phase in support for Entity MIB on new devices - Please provide timetable and details of which new devices will support the Entity MIB
76.10
About section 4.12 Component monitors The F1 poroducts supports the following hardware monitoring: If the power supply (AC or RPS) fails the software can detect the error and report it. If the fan stops rotation the software can detect and report. If the temperate of PSU on POE device is over the setting the software can detect it and report it. The CPU usage and memory usage can not be monitored.
76.11
About section 4.14 management via CLI commands The CLI commands are based on bedrock platform and it is similar with 7700 products.
76.12
About section 4.15 POE mib The mib of POE feature is similar with 3FC document. Refer to section 37/38 in F1 mib companion.
76.13
76.13.1
The RFC 2674 is supported but the ip routing configuration mib will keep unchanged. 76.13.2 About section 5.2 device warranty registration
The permant unit configuration data is supported now and the 3FC number or track serial number is stored in flash which can be obtained by entity mib. The process of warranty registration is done by customer. 76.13.3 About section 5.3 radius and network login
The mib for radius is not supported. The specific traps when the user logs on/logs off are based on bedrock platform.
76.14
76.14.1
3com requirement: Provide a common MIB table to allow RMON to be enabled on a given LAN interface. This will be used by Router Manager and Switch Manager Performance Monitoring/RMON function;
Comments: refer to section 10 in F1 mib companion. 76.14.2 About section 6.2 Qos
3com requirement: Huawei Routers and Switches support Traffic Classification, Traffic Policing, Traffic Shaping, Traffic Marking, Congestion Management, and Congestion Avoidance. We would like to configure Classification and Congestion Management using the 3NS Prioritisation Wizard. To do this we require a common QoS MIB to be supported by all Huawei Switches and Routers perhaps based on the VRP 3 QoS MIB. This MIB should be a superset of the functionality of all devices, with each device implementing the features it can support. Huawei to supply details of common MIB
76.15
About section 7 switch manager and router manager About section 7.1 Testing
76.15.1
3com requirement: Huawei are responsible for all testing of the functionality of the application on all supported platforms (see platform list below). A Test Report will be provided by Huawei with each code drop listing all known problems and any fixes/changes since the last code drop
Comments: it will be done by our test team. 76.15.2 About section 7.2 Installation
F1i products can support same swith manager. 76.15.3 Ok. 76.15.4 About section 7.4 Release Notes About section 7.3 Supported Platform
About release note requirement: Text file Release Notes must be installed and displayed during installation for both products. The Release notes will also be displayed in the Start menu. Comments: The above requirement can not be met with. The release not can not shown when downloading a software image to flash.
76.15.5
In plan phase, 3com will join the discussion about the feature design. 76.15.6 OK 76.15.7 About section 7.7 Common bug fixes About section 7.6 Device Mimic
About the common bugs, the bug will be fixed on the platform and each products will take new released platform code to release patches. 76.15.8 About section 7.8 Co-Existence
3com requirement: Huawei must provide a detailed plan showing how RM and SM and their respective patches will co-exist on the same PC. Can they be installed in any order, can they be de-installed separately etc. Comments: Agreed, the RM and SM can be installed in any order, but they cant be de-installed separately 76.15.9 About section 7.9 vresion number
The quidview and web interface will also have a software version number, just like x.xx; 76.15.10 About section 7.10 Improving consistency between SM/RM
About the consistency between SM and RM, the bedrock will do our best to realize it, but we dont assure that all functionality will have the same look and feed, because the Router Manager and Switch Manager is different from the system architecture.
We can ensure the functionality have the same look and feed in F1. 76.15.11 About section 7.11 Improving online help
3com requirement: MS Word format User Guide (based on On-line help) to be provided for each SM/RM release/upgrade. Installation section to be added for both products (based on QuidView Installation Guide) Comments: not sure, confirm with quidview team.
3com requirement: Text needs to be made consistent between SM and RM and enhanced in various ways details TBD. Comments: not sure, confirm with quidview team.
76.16
About section 4.1.6 Create Radius Server Task How to create radius Scheme
76.16.1.1 Create Scheme Algorithm
76.16.1
The RADIUS protocol configuration is performed based on a RADIUS scheme basis. First, you should create a new RADIUS scheme and configure it correctly. Every schemes name is unique.
For example, we want to create a scheme which name is radius.pqe.com, so h3cRdGroupName = 14.114.97.100.105.117.115.46.112.113.101.46.99.111.109. I Get h3cRdInfoTable.h3cRdRowStatus. h3cRdGroupName, to determine whether the scheme which we want to create is existed. If it existed, please go to step III, If not, please go to next step.
IIIFor h3cRdGroupName= radius.pqe.com, please fill in the value which shows the
authentication servers information for each row.
h3cRdInfoTable.h3cRdGroupName.h3cRdPrimUdpPort = 1812, h3cRdInfoTable.h3cRdGroupName.h3cRdPrimState = active (1), h3cRdInfoTable.h3cRdGroupName.h3cRdSecUdpPort = 1812, h3cRdInfoTable.h3cRdGroupName.h3cRdSecState = active (1), h3cRdInfoTable.h3cRdGroupName.h3cRdKey <password> h3cRdInfoTable.h3cRdGroupName.h3cRdPrimAuthIpAddrType ipv4(1) h3cRdInfoTable.h3cRdGroupName.h3cRdPrimAuthIpAddr InetAddress, h3cRdInfoTable.h3cRdGroupName.h3cRdSecAuthIpAddrType ipv4(1) h3cRdInfoTable.h3cRdGroupName.h3cRdSecAuthIpAddr InetAddress, h3cRdInfoTable.h3cRdGroupName.h3cRdServerType extended(4) h3cRdInfoTable.h3cRdGroupName.h3cRdUserNameFormat withoutdomain(1) IV
Modify h3cRdPrimAccIpAddr, h3cRdSecAccIpAddr and h3cRdAccKey.
h3cRdAccGroupName and h3cRdGroupName must be same, but it is only the Name of Scheme ,neednt be identical to the name of domain. Because a RADIUS scheme can be referenced by multiple ISP domains simultaneously. h3cRdAccInfoTable.h3cRdAccGroupName.h3cRdPrimAccIpAddr = InetAddress
An Internet service provider (ISP) domain is a group of users who belong to the same ISP. In a multi-ISP environment, the users connected to the same access device may belong to different domains. Every domain have unique name. I. Get h3cDomainRowStatus. h3cDomainName. To determine whether the domain which we want to create is existed or not.. If it existed, please go to step III.If not, please go to next step., II. Create the domain h3cDomainName = <Domain Name> multiple variables binding,
when a domain has been created , there are three entries will be added to the h3cDomainSchemeTable. h3cDomainSchemeAAAName = zero length octet string h3cDomainSchemeMode = local(2) h3cDomainSchemeAAAType = authentication(2)/authorization(3)/accounting(1) h3cDomainSchemeAccessMode = default (1) h3cDomainAuthSchemeName = h3cDomainAcctSchemeName = zero length octet string III. set scheme mode to radius find index X where h3cDomainSchemeAAAName == "" && h3cDomainSchemeAAAType == authentication (1) or accounting (2) Multiple variables binding,
h3cDomainVlanAssignMode = string(2)
76.16.3 How to set MAC authentication 76.16.3.1 Set : Mac authentication setting
h3cSecureRalmAuthMode = papUserNameFixed(2) h3cSecureRalmAuthUsername = <RADIUS FIXED USERNAME> h3cSecureRalmAuthPassword = <RADIUS FIXED PASSWORD>
If the h3cSecureRalmAuthMode set to papUsernameFixed, Authentication uses the RADIUS server by sending a PAP request with Username and Password coming from the h3cSecureRalmAuthUsername and h3cSecureRalmAuthPassword MIB objects.
77. Appendix