PRODUCT DESCRIPTION
The XLamp XB-D LED brings nextgeneration performance, price and size to all LED lighting applications. The XB-Ds footprint enables smaller designs with densely packed arrays for better light mixing and concentration. XB-D shares common footprint and uniform package design across all white and color board configurations, and optical simplifying
FEATURES
Crees smallest lighting class LED: 2.45 X 2.45mm XB-D white binned @ 85C; XB-D color binned @ 25C Up to 136lm/W in cool white (@ 85C, 350mA) Available in white, 80-minimum CRI white, and 70-minimum CRI cool white, royal blue, blue, green, amber, red-orange & red 1A maximum drive current Wide viewing angle: from 115 (white) to 140 (red) Reflow solderable - JEDEC J-STD-020C compatible Unlimited floor life at 30C/85% RH Electrically neutral thermal path RoHS- and REACh-compliant UL-recognized component (E349212)
TAbLE OF COnTEnTS
Characteristics.......................... 2 Flux Characteristics.................... 3 Relative Spectral Power Distribution.............................. 6 Relative Flux vs. Junction Temperature............................. 7 Electrical Characteristics............. 8 Relative Flux vs. Current............ 9 Relative Chromaticity vs. Current.................................. 10 Relative Chromaticity vs. Temperature........................... 11 Typical Spatial Distribution........ 11 Thermal Design....................... 12 Reflow Soldering Characteristics........................ 13 Notes..................................... 14 Mechanical Dimensions............ 15 Tape and Reel......................... 16 Packaging............................... 17
designs for many LED systems. XB-D is optimized to dramatically lower system cost in any illumination application, from indoor and outdoor lighting to architectural and transportation lighting.
www.crEE.cOM/XlaMP
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300
CHARACTERISTICS
Characteristics Thermal resistance, junction to solder point - white, royal blue, blue Thermal resistance, junction to solder point - green Thermal resistance, junction to solder point - amber Thermal resistance, junction to solder point - red-orange, red Viewing angle (FWHM) - white Viewing angle (FWHM) - royal blue, blue, green Viewing angle (FWHM) - amber, red-orange, red Temperature coefficient of voltage - white Temperature coefficient of voltage - royal blue, blue, green Temperature coefficient of voltage - amber, red-orange, red ESD withstand voltage (HBM per Mil-Std-883D) - white, royal blue, blue, green ESD classification (HBM per Mil-Std-883D) - amber, red-orange, red DC forward current Reverse voltage Forward voltage (@ 350mA, 85C) - white Forward voltage (@ 350mA, 25C) - royal blue, blue Forward voltage (@ 350mA, 25C) - green Forward voltage (@ 350mA, 25C) - amber, red-orange, red LED junction temperature mA V V V V V C 2.9 3.1 3.3 2.25 Unit C/W C/W C/W C/W degrees degrees degrees mV/C mV/C mV/C V Class 2 1000 -5 3.5 3.7 3.9 2.6 150 Minimum Typical 6.5 11 7 5 115 135 140 -2.5 -3.3 -2 8000 Maximum
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Calculated Minimum Luminous Flux (lm)** 700 mA 210 196 210 196 196 184 172 172 162 150 172 162 150 1000 mA 271 253 271 253 253 237 222 222 208 194 222 208 194
Order Code
Cool White
5000 K
8300 K
XBDAWT-00-0000-000000F51 XBDAWT-00-0000-000000E51 XBDAWT-00-0000-00000BF51 XBDAWT-00-0000-00000BE51 XBDAWT-00-0000-00000LEE4 XBDAWT-00-0000-00000LDE4 XBDAWT-00-0000-00000LCE4 XBDAWT-00-0000-00000HCE7 XBDAWT-00-0000-00000HBE7 XBDAWT-00-0000-00000HAE7 XBDAWT-00-0000-00000LCE7 XBDAWT-00-0000-00000LBE7 XBDAWT-00-0000-00000LAE7
5000 K
8300 K
Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. Typical CRI for Neutral White, 3700 K - 5000K CCT is 75. Typical CRI for Warm White, 2600 K - 3700 K CCT is 80. Minimum CRI for 70 CRI Minimum Cool White is 70. Minimum CRI for 80 CRI Minimum White is 80. Flux values @ 25C are calculated and are for reference only.
** Calculated flux values at 700mA and 1000mA are for 85C and are for reference only.
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Order Code
Dominant Wavelength Range Color Min. Group DWL (nm) Max. Group DWL (nm)
Base Order Codes Min. Luminous Flux (lm) @ 350 mA Group M2 Flux (lm) 39.8 35.2 30.6
Order Code
Blue
B3
465
B6
485
K3 K2
Dominant Wavelength Range Color Min. Group DWL (nm) Max. Group DWL (nm)
Base Order Codes Min. Luminous Flux (lm) @ 350 mA Group Q5 Flux (lm) 107 100 93.9 87.4
Order Code
Green
G2
520
G4
535
Q4 Q3 Q2
Dominant Wavelength Range Color Min. Group DWL (nm) Max. Group DWL (nm)
Base Order Codes Min. Luminous Flux (lm) @ 350 mA Group P3 Flux (lm) 73.9 67.2 62 56.8
Order Code
Amber
A2
585
A3
595
P2 N4 N3
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Order Code
Dominant Wavelength Range Color Min. Group DWL (nm) Max. Group DWL (nm)
Base Order Codes Min. Luminous Flux (lm) @ 350 mA Group P2 Flux (lm) 67.2 62 56.8
Order Code
Red
R2
620
R3
630
N4 N3
Note: Cree maintains a tolerance of 7% on flux and power measurements and 1nm on dominant wavelength measurements.
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
80
60
40
20
0 380
430
480
530
580
630
680
730
780
Wavelength (nm)
100
80 Royal Blue
60
Blue
Green Amber
40
Red-Orange Red
20
0 380
430
480
530
580
630
680
730
780
Wavelength (nm)
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
100
80
60 40 20
120
100 80
60
40 20 0 25 50 75 100 125 150
Royal Blue
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
700
600 500
400
300 200
White
100
0 2.0 2.5 3.0 3.5 4.0
900 800
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
250
200
150
White
100
50
0 100 200 300 vs. 400Current 500 600 (Tj 700= 25C) 800 900 Relative Intensity
1000
250
200
150
100
Red-Orange, Red
50
0
0 100 200 300 400 500 600 700 800 900 1000
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
250
200
150
Royal Blue
100
50
0
0 100 200 300 400 500 600 700 800 900 1000
Relative Chromaticity Vs. Current, WW RELATIVE CHROMATICITY VS. CURREnT (WARM WHITE)
0.020
T = 85 C J
0.015
0.010
0.005 CCx
CCy
0.000
-0.005
-0.010
-0.015
-0.020
100
200
300
400
500
600
700
800
900
1000
Current (mA)
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
10
Relative Chromaticity Vs. Temperature WW RELATIVE CHROMATICITY VS. TEMpERATURE (WARM WHITE)
0.020
0.015
0.010 0.005 0.000
I = 350 mA F
CCx CCy
-0.005
-0.010 -0.015 -0.020 0 25 50 75 100 125 150
Tsp (C)
80
60
White
Royal Blue, Blue, Green
40
20
0
-100 -80 -60 -40 -20 0 20 40 60 80 100
Angle ()
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
11
THERMAL DESIgn
white
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics.
1200
1200
White
1000
1000
800
800
600
600
400
= = = =
400
= = = =
200
200
green
20
40
60
80
100
120
140
1200
1200
Green
1000
1000
Amber
800
800
600
600
400
400
= = = =
200
200
20
40
60
80
100
120
140
20
40
60
80
100
120
140
1200
Red-Orange, Red
1000
800
600
400
= = = =
200
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
12
TP
Ramp-up
tP
Critical Zone TL to TP
Temperature
TL
Tsmax Tsmin ts
Preheat
tS
Ramp-down
25
t 25C to Peak
Time
Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Preheat: Temperature Min (Tsmin) Preheat: Temperature Max (Tsmax) Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25C to Peak Temperature
Lead-Based Solder 3C/second max. 100C 150C 60-120 seconds 183C 60-150 seconds 215C 10-30 seconds 6C/second max. 6 minutes max.
Lead-Free Solder 3C/second max. 150C 200C 60-180 seconds 217C 60-150 seconds 260C 20-40 seconds 6C/second max. 8 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
13
Moisture Sensitivity
In testing, Cree has found XLamp XB-D LEDs to have unlimited floor life in conditions 30C/85% relative humidity (RH). Moisture testing included a 168-hour soak at 85C/85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. Cree recommends keeping XLamp LEDs in their sealed moisture-barrier packaging until immediately prior to use. Cree also recommends returning any unused LEDs to the resealable moisture-barrier bag and closing the bag immediately after use.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of www.cree.com.
REACh Compliance
REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notices of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. Historical REACh banned substance information (substances restricted or banned in the EU prior to 2010) is also available upon request.
UL Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750.
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
14
6
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC.
3
REV
MECHAnICAL DIMEnSIOnS
2.45
6
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC.
1.84
5 4
3
REV
0.76
2.45
2.45
1.633
2.285
ANODE
C
ANODE
R1.086
2.45
Top View
C
Side View
R1.086
Bottom View*
0.462
Note: In December, 2012, Cree changed the thermal pad of the XB-D package to include the anode notch illustrated
0.65 have a different visual appearance. above. XB-D LEDs produced prior to implementation of this change may 0.923
0.36 0.82
B
0.426 0.426
0.852
0.46
0.36 0.82 0.46
0.426 0.426
0.852
0.36
2.34
0.284 1.136
2.272
0.36
2.34
0.284 1.136
2.272
0.28 0.36
0.284
0.284
0.28
0.92 2.34
2.272
UNLESS OTHERWISE SPECIFIED D. CRONIN 09/ DIMENSIONS ARE IN CHECK DAT MILLIMETERS AND AFTER FINISH. -TOLERANCE UNLESS SPECIFIED: .XX .25 APPROVED DAT .XXX .125 DRAWN BY SPECIFIED X UNLESS .5OTHERWISE
DIMENSIONS ARE IN
DRAWN BY
DAT
MATERIAL FOR SHEET METAL PARTSAND ONLY MILLIMETERS AFTER FINISH. CHECK .X TOLERANCE 1.5 UNLESS SPECIFIED: -.XX .75 .XX .25 APPROVED .XXX .125 .XXX .25 FINAL PROTECTIVE FINISH .5 X .5 X THIRD ANGLE PROJECTION
D. CRONIN
---
FOR SHEET METAL PARTS ONLY SURFACE FINISH: 1.6 .X .XX .XXX X 1.5 .75 .25 .5
MATERIAL
FINAL PROTECTIVE
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
15
6
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC.
DETAIL B SCALE 2 : 1
4
3
REV
2
REVISONS
DESCRIPTION BY
1
DATE APP'D
A B C
Released ADDED CATHODE AND ANODE NOTE CHANGED POCKET DIMS AND TOLERANCES
DC DC
D D
1.50 +.10/-.00
1.75 .10
CATHODE SIDE
B 2.60+/-0.1mm
4.0.1 1.75.10
ANODE SIDE
B
1.5.1
2.5.1
.30 .10
B
5.50 .10
+.3 12.0 .0
1.00 .10
END
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .25 .XXX .125 X .5 FOR SHEET METAL PARTS ONLY .X 1.5 .XX .75 .XXX .25 X .5 SURFACE FINISH: 1.6
DRAWN BY
DATE
D. CRONIN
10/23/11
4600 Silicon Drive Durham, N.C 27703 Phone (919) 313-5300 Fax (919) 313-5558
0.2mm
2402-00020
SHEET OF
REV.
C
1 /1
Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.)
Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) User Feed Direction
Cover Tape
Pocket Tape
13mm 7"
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
16
PACKAgIng
Unpackaged Reel
Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag
Label with CREE Bin Code Cree Bin & Barcode Label Code, Qty, Lot #
Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code,
Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Qty, Reel ID, PO #
Boxed Reel
Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
17