Anda di halaman 1dari 204

Estndar de instalacin Movistar 2G/3G

For internal use Unique document identifier (ID) / Version number / Life cycle status

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

CONTENIDO

Seguridad y prevencin de Riesgos ..4


Espacios mnimos de instalacin 6

Preparacin de material y equipamiento..11


Inspeccin de OOCC 13

Recepcin de equipos y materiales ...14


Instalacin de BTS.15

Puesta a Tierra de Equipos.................. 28


Alimentacin de Gabinetes..35 Conexin de mdulos de RF Feederless WCDMA..47 Instalacin Sistema de Antena 62 Medicin del sistema Radiante79 Cableado de BTS72 Flexi Edge instruccin de instalacin general ...92

Flexi WCDMA conectando mdulos de RF .102


Evitando Crossfeeder WCDMA.104

Instalacin DDF Transmisin ... .108


Conectando la transmisin112

Conexin de Cargas y Bateras .119

For internal use Unique document identifier (ID) / Version number / Life cycle status

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instalacin de Equipo RET TILT..130 Etiquetado RET TILT..145

Conexin de alarmas externas y configuracin en WCDMA Eltek........147


Conexin de alarmas externas en Equipo ZTE158 Conexin de alarmas externas en Equipo sistema DAS.163

MV

FSEB

Eltek

Micro

Instalacin de equipo de energa, caja de alarmas FSEB en gabinete FCOA.165


Instructivo de apertura y cierre de Radomo, Cortesia de AJ ingenieros 170

Etiquetado 3G Movistar .184


Etiquetado 2G Movistar .189

Comisionamiento de BTS 2G..193


Integracin 2G.199

For internal use Unique document identifier (ID) / Version number / Life cycle status

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

SEGURIDAD Y PREVENCION DE RIESGOS


Todo personal que se encuentre dentro del sitio de trabajo debe tener su carpeta con toda la documentacin exigida por Movistar, stas carpetas deben ser entregadas por la empresa contratista a su personal. Siempre se debe revisar todo el material y equipamiento de trabajo antes de iniciar la faena laboral, esto para comprobar la existencia de todo lo necesario, as como el estado de los mismos.

Todos los das de trabajos se debe dar una charla de seguridad donde se cerciore el supervisor que cada integrante del grupo de trabajo acate todas las normas y procedimientos de trabajo implementados en el sitio, para evitar cualquier incidente menor o grave. En esta charla deben firmar todos y cada uno, un formato que cada contratista elaborara, donde quede registrado que recibieron mencionada charla. As mismo, debe quedar un registro firmado y diario de todos los implementos entregados, as como el uso adecuado de cada uno de ellos, y que su uso es completamente obligatorio en todas las instalaciones donde se encuentran laborando.
Todos estos reportes deben estar en sitio cada da de trabajo, ya que en cualquier momento se pueden solicitar, y la no presencia de estos, puede causar sanciones al supervisor encargado de la obra.

For internal use Unique document identifier (ID) / Version number / Life cycle status

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

IMGENES DE ELEMENTOS DE PROTECCIN PERSONAL

Estos EPP son de uno obligatorio segn la labor que se est ejecutando, mientras se encuentren dentro del sitio realizando trabajos de instalacin, integracin troubleshooting.
For internal use Unique document identifier (ID) / Version number / Life cycle status

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

ESPACIOS MNIMOS DE INSTALACIN.


Se debe tener en cuenta que en el parking vienen estos espacios dibujados y se puede usar como referencia para instalar el quipo en la pared. Tambin se debe tener cuidado en dejar el espacio necesario para sacar y meter las unidades del gabinete.
METROSITE GABINETE FCOA

1450

770 770
Se debe tener la precaucin de instalar el gabinete de manera que permita la perfecta apertura y cierre de la puerta. As como tambin debe quedar nivelado, para lo cual se debe usar un nivel, de preferencia digital

For internal use Unique document identifier (ID) / Version number / Life cycle status

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Ultrasite indoor.

Se debe tener la precaucin de instalar el gabinete de manera que permita la perfecta apertura y cierre de la puerta. As como tambin debe quedar nivelado, para lo cual se debe usar un nivel, de preferencia digital.
For internal use Unique document identifier (ID) / Version number / Life cycle status

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Ultrasite Outdoor

Se debe tener la precaucin de instalar el gabinete de manera que permita la perfecta apertura y cierre de la puerta frontal como la superior en caso de estar instalado bajo techo, tener presente que se puede cambiar la posicin de apertura de la puerta. As como tambin debe quedar nivelado, para lo cual se debe usar un nivel, de preferencia digital.

For internal use Unique document identifier (ID) / Version number / Life cycle status

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

FLEXI EDGE, WCDMA y FPMA FPRA.

En la primera figura se puede observar las dimensiones del Plinth, que siempre que se fije en piso, pared, Monopole debe usarse.

En esta figura se observan los espacios mnimos requeridos en pila para la instalacin en piso.

NOTA: En Chile por ser Zona ssmica # 4 solo se pueden apilar un mximo de 5 mdulos.
For internal use Unique document identifier (ID) / Version number / Life cycle status

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Para el caso de un monopole se debe dejar esta separacin mnima recomendada

Distancia mnima entre los mdulos debe ser de 10 cms.

For internal use Unique document identifier (ID) / Version number / Life cycle status

10

Nokia Siemens Networks 2012

Dept. / Author / Date

Preparacin de Materiales y Equipamiento


Cable de tierra verde 6 AWG. Cable 35 mm2 Multifilar Azul.(para BTS Ultra Site) Cable 35 mm2 Multifilar Negro. (para BTS Ultra Site) Cable de trama BT3002 o similar para el tipo de conector apropiado.

Amarras plsticas negras de diferentes tamaos.


DF.

Teipe elctrico negro.


Teipe vulcanizante negro.

Teipe elctrico de colores (para identificar los sectores y terminales de tierra).


Soldador / Cautn.

Estao.
Etiquetas. Crimpeadora de cables de trama. Crimpeadora de cables de tierra. Llaves Torx de diferentes medidas. Llaves Allen de diferentes tamaos. Conectores de trama (SMZ/BT-43, Din Macho, Din Hembra). Cortadora o navaja. Punzn.

Llaves mecnicas de varias medidas (apriete de los clamps).


Torquimetro grande (Conectores de RF 25 32 Nwm).

Torquimetro pequeo (Conectores SMA 1 Nwm).


Coaxialera de 7/8, o en su defecto las herramientas necesarias para armar ese tipo de conectores.

Coaxialera de , o en su defecto las herramientas necesarias para armar ese tipo de conectores.
Laptop con todos los software cargados previamente.

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Preparacin de Materiales y Equipamiento


Cmara fotogrfica.
Scanner manual.

Telfono de prueba con field test net monitor para realizar pruebas de llamados y trfico de datos.
Site Mster con todo su equipamiento. Contador de frecuencia con el cable necesario para medir frecuencia en la BTS. Power Meter, en caso que el site master no posea medidor de potencia (Debe tener cargas y atenuador para evitar daar el mismo). Tornillera necesaria para anclar los equipos. Taladro con brocas de diferentes medidas. Juego de destornilladores de diferentes tamaos. Inclinmetro digital. Nivel, cinta mtrica.

Documentacin general del sitio (PISM, TSS, CSP, Site Folders en blanco para ser llenado).
Documentacin de seguridad presente en el sitio para el registro de todos los eventos.

Documentacin del proyecto (SMR, Reporte devolucin, SDS, planilla de control, planificacin).

For internal use Unique document identifier (ID) / Version number / Life cycle status

12

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Inspeccin de OOCC
Corroborar que exista en el sitio Energa AC. Verificar que los soportes estn instalados, aplomados y con la orientacin correcta. Las BDT instaladas segn documentacin (TSS, PISM)

Lugar disponible para la instalacin de BTS y equipo de energa si aplica. Espacio disponible en escalerilla para ruteo de cables, jumper, feeder, segn sea el caso. Cerco perimetral en buen estado.
Puerta de acceso en buen estado. Si ofrece el sitio seguridad para dejar materiales de instalacin dentro del mismo. Informar inmediatamente en caso de observar una situacin irregular, bien sea personas ajenas al sitio, vandalismos, etc.

For internal use Unique document identifier (ID) / Version number / Life cycle status

13

Nokia Siemens Networks 2012

Recepcin de Equipos y Materiales.


Una vez iniciada la planificacin, se debe llegar al sitio por lo menos 30 minutos antes, para corroborar que el sitio esta completamente apto para iniciar la instalacin del mismo. En este momento se debe revisar el sitio minuciosamente, tomando en cuenta todos los detalles que pudieran presentar problemas, o que facilitaran la instalacin de los equipos, feeders y antenas.

De presentarse cualquier inconveniente en esta etapa, se debe dar aviso a jefe de proyecto, para decidir si esto afecta o no la instalacin, de manera que se pueda iniciar la instalacin o se suspende la recepcin del equipamiento.
Comprobada la posibilidad de instalacin, se inicia el proceso de recepcin del equipamiento. En esta etapa se debe revisar todo el equipamiento necesario que debe llegar al sitio y comparndola con el SMR y Packing List. Debe llegar todo el material solicitado por SMR, as como el hardware necesario, dependiendo del tipo de sitio a instalar, y de acuerdo a lo planificado para el mismo. De encontrarse un hardware o material faltante se debe dar aviso inmediatamente y elaborar un SDS, as como si se debe devolver algn equipo que llegue de exceso un reporte de devolucin.

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instalacin de Gabinetes y Plinth para BTS


Metrosite.

Se deben usar tarugos metlicos acero inoxidable, al igual que tornillos. Preferiblemente pernos anclaje acordes con las orificios las bases de fijacin.

de los de de

For internal use Unique document identifier (ID) / Version number / Life cycle status

15

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Ultrasite indoor

Ultrasite Outdoor

Para ambos casos se deben usar tornillos de acero inoxidable

For internal use Unique document identifier (ID) / Version number / Life cycle status

16

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Ultra site outdoor.

Se debe tener la precaucin de instalar el gabinete de manera que permita la perfecta apertura y cierre de la puerta, tener presente que se puede cambiar la posicin de apertura de la puerta. As como tambin debe quedar nivelado, para lo cual se debe usar un nivel, de preferencia digital.
For internal use Unique document identifier (ID) / Version number / Life cycle status

17

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instalacin de gabinete FCOA

For internal use Unique document identifier (ID) / Version number / Life cycle status

18

Nokia Siemens Networks 2012

Eltek

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Micro Eltek

Fijacin a Pared

Se debe usar siempre tornillos y tarugos de acero inoxidable (fijacin a pared)

Fijacin a Pole

For internal use Unique document identifier (ID) / Version number / Life cycle status

20

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Flexi WDCMA, Flexi EDGE, Multiradio y FPMA, FPRA Sobre Plinth.

Al instalar los mdulos en sitios Outdoors, instalar los tornillos de la carcaza, para evitar la entrada de agua por los orificios.

For internal use Unique document identifier (ID) / Version number / Life cycle status

21

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Requerimientos de Instalacin en Mstil

El Kit de montaje opcional en mstil permite la instalacin de la BTS Flexi WCDMA en un mstil de 60-300 mm de dimetro. Se puede colocar hasta cuatro mdulos en un kit de montaje en mstil. Nota: Solo se pueden instalar dos mdulos por platea (plinth). Cuando se instalan mdulos en un mstil, asegurarse que el mismo en el sitio BTS sea lo suficientemente fuerte para soportar el peso de la BTS, para cumplir los requerimientos ssmicos y los requerimientos locales en cuanto a viento.

For internal use Unique document identifier (ID) / Version number / Life cycle status

22

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Montaje del plinth en un poste.

For internal use Unique document identifier (ID) / Version number / Life cycle status

23

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Fijacin de mdulos a poste.

For internal use Unique document identifier (ID) / Version number / Life cycle status

24

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Orden de Instalacin Recomendada de mdulos

No instalar ms de dos mdulos por plinth Los mdulos se deben instalar con los paneles frontales mirando hacia la izquierda o la derecha. No instalar los mdulos con los paneles frontales mirando hacia abajo o hacia arriba.

For internal use Unique document identifier (ID) / Version number / Life cycle status

25

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Requerimientos de Instalacin en Pared


El kit de montaje opcional para piso, pared y mstil (FMFA) permite la instalacin de la BTS Flexi WCDMA, Flexi Edge, Multiradio y de energa FPMA, FPRA en una pared. Se deben cumplir los siguientes requerimientos cuando se instalan los mdulos en una pared: -Personal calificado debe inspeccionar la pared de instalacin antes de montar la BTS. -Se debe asegurar que la pared de instalacin sea lo suficientemente fuerte para soportar el peso de la BTS en cualquier condicin. -La pared debe cumplir con los requerimientos ssmicos locales. -Los tornillos de fijacin de mdulo (4 piezas) y cubierta de mdulo se deben ajustar a 5 Nm para cumplir con los requerimientos ssmicos, y vibracin para Zona Ssmica 4. -El nmero mximo de mdulos por platea (plinth) es DOS.

-Para configuracin completa, se deben utilizar tres plateas (plinths). -Los mdulos se deben instalar alineados horizontalmente, con direccin de cableado hacia arriba y abajo. -La parte posterior de los mdulos se debe instalar mirando hacia la pared.

For internal use Unique document identifier (ID) / Version number / Life cycle status

26

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Consejo Alinear las marcas de ubicacin en los mdulos para ayudar en la alineacin de agujeros con los pernos de fijacin.

Consejo Usar las marcas en el mdulo para ayudar en la alineacin de los agujeros con los pernos de fijacin.

For internal use Unique document identifier (ID) / Version number / Life cycle status

27

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Puesta a Tierra de Equipos.


Metrosite.

PRECAUCIN
Voltaje potencialmente letal puede ser inducido si el equipo no esta puesta a tierra correctamente. Asegrese que todas las conexiones a tierra estn seguras y no pueden moverse.

Existen 3 posibles puntos de conexin a tierra del gabinete, son las que se muestran en la figura del lado.

For internal use Unique document identifier (ID) / Version number / Life cycle status

28

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Ultrasite Indoor/ Outdoor

La instalacin de la tierra es el primer paso a seguir despus de anclar el gabinete.


For internal use Unique document identifier (ID) / Version number / Life cycle status

29

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Gabinete FCOA

Luego de Anclar FCOA, se debe poner a tierra el gabinete a fin de evitar daar cualquier mdulo. Cuando se manejen los mdulos deben tener puesta la cinta antiesttica. El calibre del cable de tierra debe ser para AC AWG6 y para DC AWG6.

For internal use Unique document identifier (ID) / Version number / Life cycle status

30

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Eltek

Punto de aterrizaje del gabinete outdoor a Barra de tierra.

Punto de aterrizaje del gabinete indoor a Barra de tierra.

For internal use Unique document identifier (ID) / Version number / Life cycle status

31

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Micro Eltek.

Puntos de conexin a tierra de micro Eltek


For internal use Unique document identifier (ID) / Version number / Life cycle status

32

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Puesta a tierra Flexi WCDMA, Flexi Edge, Multiradio, sobre Plinth.

Cuando se instalen los mdulos dentro de un gabinete, no se requiere cable de tierra individual para los mdulos ya que el gabinete provee una tierra adecuada

Si la BTS tiene ms de un plinth (por ejemplo en instalaciones de pared o poste), conectar cada plinth a la tierra principal.

For internal use Unique document identifier (ID) / Version number / Life cycle status

33

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Ejemplo Flexi Edge

Cuando los mdulos se instalan en un gabinete, no es necesario independizar los cables de tierra, solo se conecta a tierra el gabinete.

Cuando los mdulos se instalan sobre plinths, se debe conectar los plinths a tierra

Cada mdulo debe ser conectado al plinth en el cual est instalado.

For internal use Unique document identifier (ID) / Version number / Life cycle status

34

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Puesta a tierra de FPMA

For internal use Unique document identifier (ID) / Version number / Life cycle status

35

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Alimentacin de Gabinetes
Metro site

Existen 3 posibilidades para alimentar la BTS, Para ello se debe contar con la fuente de alimentacin correcta, ya sea AC 110, AC 230 y DC -48.

For internal use Unique document identifier (ID) / Version number / Life cycle status

36

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Ultrasite.

Conexin DC -48 V

For internal use Unique document identifier (ID) / Version number / Life cycle status

37

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Eltek.

Conexin AC segn configuracin de la Red.

For internal use Unique document identifier (ID) / Version number / Life cycle status

38

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Micro Eltek, conexin AC.

Conexin monofsica
For internal use Unique document identifier (ID) / Version number / Life cycle status

AC Ground Wire: 4 mm2 to 10 mm2. AC Cables: 4 mm2 to 10 mm2

39

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Micro Eltek

Conexin monofsica brakers de protecin

con

Conexin monofsica con brakers de protecin + OVP

For internal use Unique document identifier (ID) / Version number / Life cycle status

40

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Micro eltek

Conexin monofsica solo con OVP


For internal use Unique document identifier (ID) / Version number / Life cycle status

41

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Micro Eltek Flatpack 2. Conexin AC. Con OVP.

For internal use Unique document identifier (ID) / Version number / Life cycle status

42

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Alimentacin AC del FPMA

Conexin monofsica 220 Vac

Conexin Trifsica 220 Vac

L= Fase N= Neutro PE= Tierra

For internal use Unique document identifier (ID) / Version number / Life cycle status

43

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Flexi WCDMA

El calibre del cable a utilizar es de 6 AWG, Conectado a un automtico de 63Amp en Eltek 1500, 2000 , APM Huawei, ZTE, y de 32 Amp para Mini y Micro Eltek

Conexin -48 de mdulo de Sistema.

For internal use Unique document identifier (ID) / Version number / Life cycle status

44

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Alimentacin Flexi Edge.

NOTA: Boots dobles (822862) vienen en los mdulos EOCA y son necesarias Para hacer estas conexiones en Puente.

Se debe contar con Crimpeadora para el cable, el grosor del Terminal min.: 25 mm y mx.: 35 mm. El torque de apriete de los terminales debe ser entre 10 y 14 Nw.

For internal use Unique document identifier (ID) / Version number / Life cycle status

45

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Abajo se detalla una manera correcta de conectar la alimentacin.

For internal use Unique document identifier (ID) / Version number / Life cycle status

46

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conexin de mdulos de RF Feederless WCDMA. Flexi Edge, Multiradio

Instrucciones para el cableado de los FSEC OVPs

Ya que el cable que llega en los packings actuales difiere de los colores usados en el pas, es necesario localizar la instruccin global de conectado.

-48 VCC -48 vcc Marrn

Negro + Malla GND


Debe ser cubierta con teipeFor internal use
Unique document identifier (ID) / Version number / Life cycle status

47

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

El cable DC entre: OVP-System module OVP-RF module

Debe ser conectado: Cable Azul: Negative (-) Cable Negro: Positive (+)

El cable DC (el grueso) que se encuentra entre: OVP-OVP Debe ser conectado de la siguiente forma: Cable Gris: debe ser cortado. malla(shield): GND debe ser cubierta con cinta aislante verde. Cable Negro: (+) Cable marrn: (-) No confundir malla con el cable gris

For internal use Unique document identifier (ID) / Version number / Life cycle status

48

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instalacin de OVP FSEC en la pared.

Para este tipo de caso, existen varias posibilidades de instalacin de las OVP s. Una seria la fijacin de los mismos a la escalerilla usando abrazaderas metlicas. Otra solucin seria fijarlas en la pared como se muestra en las 2 figuras abajo. NO USAR PLINTH Metlico del OVP para fijarlo a la pared

For internal use Unique document identifier (ID) / Version number / Life cycle status

49

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

En la Escalerilla o a un costado del Eltek

For internal use Unique document identifier (ID) / Version number / Life cycle status

Otra solucin seria instalar una escalerilla vertical y fijar las OVPs a la misma con abrazadera metlica y se debe instalar plinth de OVP.

50

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

En el caso de instalar FSMs en poste, trpode, etc., se instalaran las OVPs con plinth, como se muestra en la figura

For internal use Unique document identifier (ID) / Version number / Life cycle status

51

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Para los casos de gabinete FCOA, las OVPs se deben instalar en la parte superior como se muestra en la figura, sin caja y sin plinth.
For internal use Unique document identifier (ID) / Version number / Life cycle status

52

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Formas incorrectas de instalar OVP:

Aqu se observa el cable ingresando por la parte superior, la caja OVP quedo instalada incorrectamente.

Se puede observar que aunque la caja quedo horizontalmente, los cables estn ingresando desde arriba hacia abajo, lo que conlleva al ingreso de agua.

For internal use Unique document identifier (ID) / Version number / Life cycle status

53

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Se permitirn estos casos, cuando no exista otra forma de instalar OVP, sin embargo, debe sellarse el ingreso de los cables con sellante blanco. De igual forma cuando se instalen en las escalerillas abajo.

En este caso se puede observar la OVP sellada con silicona blanca, y evitar de esta manera el ingreso del agua. De preferencia que sea de la marca HENKEL 1100 universal.

For internal use Unique document identifier (ID) / Version number / Life cycle status

54

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conexionado de cables OVP S FSES

Cable flexible de tierra estandar del FSES.

Conector para el cable de Alarmas

Cable de alimentacin estandar flexi AWG 6 (190cm) con conector Multibeam sellado IP

Ser conectado:
Al mdulo de sistema DC output

mdulo de RF DC input

Cable de alimentacin DC (El mismo usado con el FSEC) de FSES a FSES

For internal use Unique document identifier (ID) / Version number / Life cycle status

55

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instalacin de OVP`S FSES

Instalacin al costado del mdulo

Sobre plinth

For internal use Unique document identifier (ID) / Version number / Life cycle status

56

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conexin de los mdulos de RF desde un FPMA

Paso 1: Se toma el cable de alimentacin DC del RF Module. Paso 2: Se toma uno de los extremos y se quita el conector. Paso 3: Se quita la capa aislante superior dejando los cables a la vista. Paso 4: desconectar los cables que vienen por defecto a la salida del FPMA

Paso1 Paso2

Paso3
For internal use Unique document identifier (ID) / Version number / Life cycle status

Paso4

57

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Paso 5: sacar las protecciones de goma de la salida DC. Paso 6: desconectar los cables DC soltando las tuercas conectores y golillas.

995370

Step 5 Step 6

For internal use Unique document identifier (ID) / Version number / Life cycle status

58

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Paso 7: Sacar las protecciones de goma que cubren los bornes de alimentacin DC. Favor no romper sta Goma. Paso 8: Perforar con un punzn la proteccin de goma dnde entrar el cable de alimentacin DC del RF module

Step 7

Step 8

For internal use Unique document identifier (ID) / Version number / Life cycle status

59

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Paso 9: Pasar los cables por las perforaciones hechas en lasprotecciones de goma que cubren los bornes de alimentacin. Paso 10: Colocar los terminales de Ojo M10 en las puntas de los cables y crimpear.

Alimentacin + 0 V cc

Alimentacin - 48 V cc

Step 9

Step 10

For internal use Unique document identifier (ID) / Version number / Life cycle status

60

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Paso 11: Conectar los cables tal y como se muestra en la figura tomando en cuenta la polaridad de los bornes. Paso 12: volver a colocar las protecciones de goma sobre las borneras.

Step 11

Step 12

For internal use Unique document identifier (ID) / Version number / Life cycle status

61

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instalacin del Sistema Radiante

Primero colocar 2 capas de teipe elctrico. Luego 2 capas de vulcanizante y para finalizar 2 capas de teipe elctrico. La apariencia del sellado debe quedar como el mostrado en la figura de arriba
For internal use Unique document identifier (ID) / Version number / Life cycle status

62

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

PRODUCTOS DE SISTEMA DE ANTENAS

Antenna Jumper cable

Mast Head Amplifier and BiasT


Conector

Feeder clamps
Grounding kit

Combiners diplexers Feeder cable

EMP protector

For internal use Unique document identifier (ID) / Version number / Life cycle status

63

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Los conectores de las antenas deben quedar correctamente sellados.

Se debe fijar el Tilt elctrico y mecnico, de acuerdo a los requerimientos del proyecto (CSP = Configuracin de sitio en proyecto).
For internal use Unique document identifier (ID) / Version number / Life cycle status

64

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Antenas deben quedar apretadas guardando simetra entre ambos pernos para evitar que se agripen, una vez que se le ha dado el Azimuth exigido en el TSS. Los Brakets deben igualmente quedar apretados una vez se ha medido el tilt mecnico con el inclinmetro digital cumpliendo ste con lo exigido en el TSS, de manera que se eviten desplazamientos indeseados Adems se deben colocar las golillas que vienen por defecto con la antena.

For internal use Unique document identifier (ID) / Version number / Life cycle status

65

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

CURVATURA DE LOS CABLES.

CABLE RFF 3/8-50 RFF 1/2-50 RF 1/2-50 RF 7/8-50 RF 1 1/4-50

CURVATURA MINIMA CURVATURA MINIMA PARA UNA SOLA CURVA PARA VARIAS CURVAS 13 mm 15 mm 80 mm 120 mm 200 mm 25 mm 30 mm 160 mm 250 mm 350 mm

RF 1 5/8-50

250 mm

500 mm

For internal use Unique document identifier (ID) / Version number / Life cycle status

66

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

INSTALACIN CORRECTA DE JUMPERS A ANTENAS.

OK

NOK
OK NOK

Jumper

Jumper

For internal use Unique document identifier (ID) / Version number / Life cycle status

67

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

CURVATURA DE LOS CABLES.

FEEDER TYPE REPEATED

REPEATED BENDING RADIUS

SINGLE BENDING RADIUS

500mm

250mm

350mm 250mm
RF 1/2 160mm 30m m 25m m

200mm

120mm
80mm

For internal use Unique document identifier (ID) / Version number / Life cycle status

Dept. / Author / Date

68

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

CURVATURA DE LOS CABLES.

La curvatura de los cables deben seguir las especificaciones de NSN para evitar daos y disminuir la prdida en el cable. No permitido

MAL

MAL

For internal use Unique document identifier (ID) / Version number / Life cycle status

69

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Distancia entre clamps

Cable

Distancia entre clamps Optima Maxima


200mm 200mm 300mm 600mm

1/4 Superflex 3/8 Superflex

150mm 150mm 250mm 500mm

1/2 Superflex 1 /2 Feeder 7/8 Feeder 1-5/8 Feeder

900mm 1000mm

1000mm 1400mm

For internal use Unique document identifier (ID) / Version number / Life cycle status

70

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Distancia entre clamps

Seguir las especificaciones de los cables. RF 1/4 superflex

150mm 150mm 250mm

200mm (Max)
200mm (Max) 300mm (Max)

RF 3/8 superflex
RFF 1/2 superflex

RF 1/2

500mm

600mm (Max)

RF 7/8

900mm

1000mm (Max)

RF 1 5/8

1000mm

1400mm (Max)

For internal use Unique document identifier (ID) / Version number / Life cycle status

71

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Procedimiento de sellado

Responsabilidad. Ser responsabilidad del personal contratista responsable de la instalacin. Descripcin de actividades. Todas las conexiones exteriores deben ser selladas una vez realizadas las mediciones en las antenas El material a utilizar para el sellado es: Cinta Aisladora (3M 88T).

For internal use Unique document identifier (ID) / Version number / Life cycle status

72

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Sellado de Conectores entre dos Cables:

El sellado debe realizarse sin humedad excesiva. Los conectores deben estar limpios y secos, se aplicaran 2 capas de cinta aisladora, 2 capas de cinta vulcanizante y 2 capas de cinta aisladora.

For internal use Unique document identifier (ID) / Version number / Life cycle status

73

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

1._ Aplicar 2 capas traslapadas de cinta aisladora, comenzando 20mm ms debajo del conector y 20 mm ms arriba del conector.

For internal use Unique document identifier (ID) / Version number / Life cycle status

74

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

2._ Aplique la cinta vulcanizada desde la parte mas baja del conector y dejando aproximadamente 50 mm bajo el conector, se deben aplicar 2 capas de cinta Vulcanizada. La tensin de la cinta vulcanizada debe variar para lograr una aplicacin sin espacios vacos. Para evitar estos vacos en reas crticas, tense la cinta hasta cerca de su punto de ruptura. En reas menos crticas, tense menos la cinta. Asegrese que cada vuelta se superponga a la anterior en aproximadamente el 50% de su ancho. Evite dejar la apariencia de escalones muy marcados, de manera que se asegure un sellado apropiado con la cinta vulcanizada y tambin con la aplicacin de la cinta de aislar.

3._ Aplicar 2 capas traslapadas ligeramente estiradas de cinta de aislar comenzando 30 mm por debajo del punto mas bajo de la cinta vulcanizada y siguiendo hacia arriba extendindose hasta 30 mm delante del otro extremo de la cinta vulcanizada. Cada vuelta debe traslaparse de 1 a 2 mm sobre el final de la vuelta previa en ambos lados. Se recomienda aplicar las 2 capas en forma continua.
Corte la cinta con un cuchillo cartonero para evitar perdida de tensin.

For internal use Unique document identifier (ID) / Version number / Life cycle status

75

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Una vez realizada la inspeccin del sellado, en el cual se verifica que las capas se encuentran solapadas, y que no existe posibilidad que se acumule o ingrese humedad a travs del sellado, se hace necesario la aplicacin de amarras plsticas de exterior para cada extremo. Para el sellado del conector en la antena, sellar de la misma forma que lo descrito para el sellado de conectores a diferencia que en un extremo el sellado debe realizarse sobre el conector de antena que se encuentra en el chasis

Adems de este tipo de sellado (vulco) descrito anteriormente, se utilizarn sellos del tipo de Termo retrctil y Retrctil. El tipo de sellado a utilizar en cada caso ser definido slo por Telefnica Mvil a travs de su Jefe de Proyecto asignado a cada uno de ellos.
For internal use Unique document identifier (ID) / Version number / Life cycle status

76

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instalacin de Grounding Kit en Feeders.

La instalacin de los grounding Kits debe hacerse por personal calificado ya que la mala instalacin del mismo puede provocar prdidas de retorno o ROE alto produciendo mala calidad de servicio.
For internal use Unique document identifier (ID) / Version number / Life cycle status

77

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

La Instalacin de los cables a la barra de tierra debe ser siempre de manera vertical con descarga hacia abajo.

Nota: En las torres o roof top se deben colocar gronding kit en los feeders dependiendo de las barras de tierra que se encuentren en el recorrido de los mismos.
For internal use Unique document identifier (ID) / Version number / Life cycle status

78

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Mediciones del Sistema Radiante

Site Master Site Analyser TEST EQUIPMENT

Phase Stable Test Cable

Short/Open Circuit or 50ohm Load

50 ohm

Se debe calibrar el site master siempre que se vaya a realizar nuevas mediciones.

Medicin de Return Loss solo al feeder, con la carga al final del feeder

For internal use Unique document identifier (ID) / Version number / Life cycle status

79

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

50 Ohm Termination
Adaptor

Antenna

External Jumper

Site Master Site Analyser TEST EQUIPMENT

Phase Stable Test Cable

50 ohm Adaptor, N(M) - 7/16"(F)

Feeder Cable under Test

Short Circuit Termination


Adaptor

Antenna

External Jumper

Site Master Site Analyser TEST EQUIPMENT

Phase Stable Test Cable

50 ohm Adaptor, N(M) - 7/16"(F)

Feeder Cable under Test

Medicin de cable loss del feeder, se coloca el componente short (corto) al final del feeder
For internal use Unique document identifier (ID) / Version number / Life cycle status

80

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Antenna

External Jumper
(not in case of 1/2" cable)

Adaptor
N(M) - 7/16"(F)

Feeder Cable BTS Cabinet Internal Jumper*

Phase Stable Test Cable BTS Internal Cable

50 ohm Site Master Site Analyser TEST EQUIPMENT

*optional, depends on installation

Medicin de Return Loss del sistema completo, se debe tener en cuenta que si existen MHA, estos se deben bypasear.
For internal use Unique document identifier (ID) / Version number / Life cycle status

81

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Jumper Cable under Test


Site Master Site Analyser TEST EQUIPMENT Phase Stable Test Cable

Adaptor

Termination 50 Ohm

50 ohm

Adaptor
N(M) - 7/16"(F)
Si se realizan jumpers en el sitio, se deben medir para comprobar que estn bien.

Todas las mediciones deben ser guardadas para luego ser descargadas al PC. Como recomendacin, es necesario que cada vez que culmine las mediciones de un sitio, estas sean descargadas al computador, para evitar prdidas de informacin.

For internal use Unique document identifier (ID) / Version number / Life cycle status

82

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Cabling
Ultrasite.

BYPASS

Cuando se solicite combinar ByPass, se debe instalar los cables de Tx de cada TRX directamente al duplexor, como se puede apreciar en la figura arriba.

For internal use Unique document identifier (ID) / Version number / Life cycle status

83

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

WBC 2:1

Cuando se solicite combinar 2:1 (WBC 2:1), se debe usar un Wide Band Combiner, y conectar las salidas de Tx de cada TRX al combiner, y la salida del Combiner al Duplexor. Como se muestra en la figura.
For internal use Unique document identifier (ID) / Version number / Life cycle status

84

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

WBC 4:1

Cuando se solicite combinar 4:1 (WBC 4:1), se debe conectar la salida de Tx de cada TRX a un combinador, luego la salida del combinador conectarla a otro combinador, y la salida del combinador conectarla al Duplexor. Se puede apreciar estas conexiones en la figura de arriba.

For internal use Unique document identifier (ID) / Version number / Life cycle status

85

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Posicin de cables en los cable entries externos

Entrada de cables externos en WCDMA, Flexi Edge y Multi Radio

For internal use Unique document identifier (ID) / Version number / Life cycle status

86

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Flexi Edge

En la figura de abajo se puede observar la manera correcta de instalar los cables de RF en la Flexi Edge para una Configuracion 444 WBC 2>1
For internal use Unique document identifier (ID) / Version number / Life cycle status

87

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

En la figura de abajo se puede observar la correcta instalacin de los cables de RF para una Configuracion 444 ByPass.

For internal use Unique document identifier (ID) / Version number / Life cycle status

88

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

En la figura de abajo se puede observar la manera correcta de la instalacin de los cables de RF para una Configuracion 444 WBC 4>1.

For internal use Unique document identifier (ID) / Version number / Life cycle status

89

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

EDGE/BTS 8+8+8 WBC 4:1


Setores

Cables de TX

Nmero

Cabo
99493 1 99493 1 99493 1 99493 1 99493 1 99493 1 99493 1 99493 1 99493 1 99493 1 99493 1 99493 1 99493 1 99493 1

De - para
TxA - TxA (WBC) TxB - TxB (WBC) (WBC)TxOut TxB(WBC) TxA - TxA (WBC) TxB - TxB (WBC) (WBC)TxOut TxA(WBC) (WBC)TxOut TxA (DDU) TxA - TxA (WBC) TxB - TxB (WBC) (WBC)TxOut TxA(WBC) TxA - TxA (WBC) TxB - TxB (WBC) (WBC)TxOut TxB(WBC) (WBC)TxOut TxB(DDU)

1 2 3 4 5

4 6

5 14
12

6 7 8 9 10 11

7 11

13

12 13 14

For internal use Unique document identifier (ID) / Version number / Life cycle status

10

90

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

EDGE/BTS 8+8+8 WBC 4:1


Nmero Cabo 994933 994933 994931 994931 994931 De - Para RxA RxA3 RxB RxB4 RxA RxA1 RxB RxB4 RxA RxA3

Setores A B C

Cabos de RF de RX 1

2 3 4

3 7

6 7 8

994931 994931 994931

RxB RxB2 RxA RxA2 RxB RxB1

8
NOTA; 1) Un sector mostrado en la figura. 2) Todos 3 setores tienen configuraciones idnticas. 3) Antes de continuar com el prximo sector verificar que todos los cables estn correctos em sus posiciones. 4) Se Recomienda usar los campos vacos de la tabla como verificadores de la instalacin.

For internal use Unique document identifier (ID) / Version number / Life cycle status

91

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Flexi Edge Instrucciones de instalacin General (feederless).


El orden de instalacin vara de acuerdo a los tipos de configuracin.

En el caso de usar las cajas, el Optical Converter Module (EOCA) se debe instalar en las cajas de 3U. El entry cable

de las cajas 3U tienen un punto para amarrar los cables pticos, esto es mandatorio para proteger el cable ante posibles daos. Instalar el Optical Converter Module (EOCA) en la caja superior.

En instalaciones verticales, instalar el (EOCA) mirando hacia la izquierda, de tal manera que el terminal DC vaya
hacia abajo.

En instalaciones en gabinete, se sigue el orden de la instalacin en stack. En sectores lcales, instalar el (EOCA)
junto al System Module. Si el sector local es instalado en un gabinete externo (FCOA), el System Module y el (EOCA) no podran ser instalados en el rack vertical debido a la falta de espacio (un System Module y dos (EOCA) requieren 6U, pero el FCOA solo tiene 5U en vertical).

For internal use Unique document identifier (ID) / Version number / Life cycle status

92

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Ubicaciones recomendadas para una configuracin local 2+2+2 en mastil

For internal use Unique document identifier (ID) / Version number / Life cycle status

93

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Ubicaciones recomendadas para una configuracin local de sectores remotos 2+2+2 en mastil

DC terminals

For internal use Unique document identifier (ID) / Version number / Life cycle status

94

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conectando cables pticos.

Nota: El adaptador multimodo (incluido en el delivery de los cables de 50 m 100 m) es necesario cuando dos
cables opticos son conectados juntos. El adaptador multimodo no brinda proteccin IP,La caja del FSEC (OVP) si provee proteccin IP55.

For internal use Unique document identifier (ID) / Version number / Life cycle status

95

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conectando los cables pticos.

El cable ptico de 2 m de modo simple provee proteccin IP55 en el EOCA. El otro extremo es conectado
dentro de la caja con proteccin IP55.

For internal use Unique document identifier (ID) / Version number / Life cycle status

96

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conectando cables pticos

Insertar el tranceiver ptico en la posicin a utilizar en el EOCA.

Jalar la goma de proteccin para tener libre el conector

For internal use Unique document identifier (ID) / Version number / Life cycle status

97

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conectando cables pticos

Conectar y sellar firmemente con la goma de proteccin.

Enrute el cable ptico atravs del cable entry para conectarlo en el tranceiver ptico. En instalaciones de mstil o
pared, enrute el cable atravez de del entru cable que tenga un punto para amarrar con tie wrap.

Acomodar el cable optico respetando la curvatura. Repita los pasos 1-4 para cada EOCA.

For internal use Unique document identifier (ID) / Version number / Life cycle status

98

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conectando el cable de BUS


Se recomienda enrutar el
cable de BUS entre el EOCA y el ESMA (o DTRX en el lado remoto) usando los cable entries laterales

For internal use Unique document identifier (ID) / Version number / Life cycle status

99

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conectando los cables de BUS: numeracin recomendada

2+2+2 terraza

For internal use Unique document identifier (ID) / Version number / Life cycle status

100

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conectando los cables de BUS: numeracin recomendada

2+2+2 mstil

For internal use Unique document identifier (ID) / Version number / Life cycle status

101

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

FLEXI WCDMA INTERCONECTANDO MDULOS DE SISTEMAS Y RF

Se debe conectar la fibra 1 del primer mdulo con la fibra 1 del segundo mdulo de extensin, de igual manera con los puertos 2 de cada mdulo. Es decir, se deben interconectar los mdulos.
Al manipular la fibra se debe tener mximo cuidado, ya que son extremadamente delicados los conectores.

Deben contar con todos los transceivers para poder conectar todos los mdulos al mdulo de sistema principal. For internal use
Unique document identifier (ID) / Version number / Life cycle status

102

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Cuando deba unirse la FO, colocar caja IP55 metlica, con medidas 20x30x15. Adicionalmente se debe conectar a tierra esta caja.
For internal use Unique document identifier (ID) / Version number / Life cycle status

103

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Evitando Crossfeeder
Al posicionarse en el sector, el software le indicar donde debera estar conectada cada antena.

For internal use Unique document identifier (ID) / Version number / Life cycle status

104

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

105

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

XML 1

XML2

XML3

XML 4

For internal use Unique document identifier (ID) / Version number / Life cycle status

106

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

XML5

XML6

XML7

XML8

XML9

XML10

XML 11

XML 12

XML13

For internal use Unique document identifier (ID) / Version number / Life cycle status

107

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instalacin de DDF de transmisin


Grounding 6mm2 (to be prepared for M5 if not available, connect using a spring washer and a nut)

De BTS con conectores DIN hembra

Tx1
Rx1

E1 1 E1 2
TX con conectores DIN machos

Tx2 Rx2

E1 3
Tx3 Rx3

Tx4 Rx4

E1 4

DIN Machos DIN Hembras

De BTS (Nokia)

TX (Telefonica)

For internal use Unique document identifier (ID) / Version number / Life cycle status

108

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

5 cm

Altura desde el piso 120 cm


For internal use Unique document identifier (ID) / Version number / Life cycle status

5 cm

109

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conexin BTS (Nokia)

For internal use Unique document identifier (ID) / Version number / Life cycle status

110

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Connect Grounding 6mm2 to mounting screws

Conexin Transmisin (Telefonica)

For internal use Unique document identifier (ID) / Version number / Life cycle status

111

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conectando la transmisin.
WCDMA

Se debe dejar los 4 cables de Tx conectados y etiquetados

Instalar DF e identificarlo al igual que las tramas.

For internal use Unique document identifier (ID) / Version number / Life cycle status

112

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

El cable Ethernet de igual manera se debe dejar conectado y dejado a un lado donde se pueda apreciar y para comprobacin se debe tomar foto del mismo instalado y la posicin donde queda.
For internal use Unique document identifier (ID) / Version number / Life cycle status

113

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Forma correcta de conectar las tramas a los adaptadores de impedancia.

For internal use Unique document identifier (ID) / Version number / Life cycle status

114

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

115

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Se debe usar la ponchadora correcta para los adaptadores de impedancia 110.

Para conectar en la regleta se debe usar la ponchadora correcta Krone.

For internal use Unique document identifier (ID) / Version number / Life cycle status

116

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Ultra site, Metro site, Mini Ultra site

Conexin y etiquetado de transmisin Lado DDF.


For internal use Unique document identifier (ID) / Version number / Life cycle status

Conexin y etiquetado de transmisin lado FXC E1.

117

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Flexi Edge

Estos cables de trama vienen con una punta ya hecha con conector SMZ el cual va conectado a la tarjeta de transmisin como se observa en la primera grfica. Al otro extremo se conecta a un balun o adaptador de impedancia como el que se muestra en la grfica, siempre y cuando sea necesario, ya que depender de la impedancia de la trama que tenga el equipo de enlace, que puede ser de 75 ohm 120ohm. Correcto etiquetado de los cables de trama en BTS.
For internal use Unique document identifier (ID) / Version number / Life cycle status

118

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conexin de Cargas y Bateras

For internal use Unique document identifier (ID) / Version number / Life cycle status

119

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conexiones Eltek Flatpack 1500.

For internal use Unique document identifier (ID) / Version number / Life cycle status

120

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conexin DC Eltek. Alarmas Externas

8 conexiones de carga de 10 Amp max

GMT Fusibles de 10A

Conexin de alarmas relays 1 al 6


For internal use Unique document identifier (ID) / Version number / Life cycle status

121

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conexiones de cargas de bajo consumo

For internal use Unique document identifier (ID) / Version number / Life cycle status

122

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Eltek Flatpack 2

Conexin -48 VCC cargas de bajo consumo Max 10 Amp

Conexin -48 Vcc


For internal use Unique document identifier (ID) / Version number / Life cycle status

Conexin + 0

123

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Micro Eltek, 1500

Conexin
-48Vcc Conexin a banco de batera, Respaldo Conexin +0 Vcc

For internal use Unique document identifier (ID) / Version number / Life cycle status

124

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Micro Eltek 200

For internal use Unique document identifier (ID) / Version number / Life cycle status

125

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Equipo rectificador ZTE

Vista del rectificador.


126 Nokia Siemens Networks 2012

equipo

Puntos de conexin - 48VCC

Puntos de conexin +0 VCC

For internal use Unique document identifier (ID) / Version number / Life cycle status

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Las conexiones se realizan por la parte superior de los automticos, para ello es necesario desarmar el panel y sacar para as tener acceso a la parte superior.

For internal use Unique document identifier (ID) / Version number / Life cycle status

127

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Equipo de energa APM 30 Huawei

Vista Frontal del equipo rectificador


Vista general rectificador
128

del

equipo

For internal use Unique document identifier (ID) / Version number / Life cycle status

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Punto de conexin -48 Vcc en el equipo rectificador Nota: La conexin debe hacerse con terminales de punta no como se muestra en la grfica NOTA: Es importante destacar que se debe hacer la conexin en el punto que corresponda al automtico de 63 Amp par el caso de Flexi WCDMA.
For internal use Unique document identifier (ID) / Version number / Life cycle status

129

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instalacin de Equipo Ret Tilt COMBA

For internal use Unique document identifier (ID) / Version number / Life cycle status

130

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

131

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

132

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

133

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

134

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

135

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

136

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

137

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

138

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

139

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

140

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

141

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

142

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

143

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

144

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Etiquetado de Ret Tilt


XXX UNIDADES AUTOADHESIVAS
5 cms

XXX u. con perforaciones


Espesor 0,2 cm

RET MOVISTAR

1,0 cms.

RET 3D x SECTOR 3
7 cms 0.5 cm

2 cms

XXX u. con perforaciones


Espesor 0,2 cm

RET 1D x SECTOR 1
0.5 cm 7 cms

2 cms

XXX u. con perforaciones


0.5 cm

RET ENERGIA - 48
6 cms

1 cms 1 cms

XXX u. con perforaciones

RET ETHERNET
2 cms 4 cms

1 cms

RET 2D x SECTOR 2
0.5 cm
7 cms

RET ATERRAMIENTO
5 cms

1 cms

For internal use Unique document identifier (ID) / Version number / Life cycle status

145

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Cantidad de rtulos por equipo instalado.

RET 1D x SECTOR 1

BLANCO-NEGRO

2 Uni

RET 2D x SECTOR 2

AZUL-BLANCO

2 Uni

RET 3D x SECTOR 3

ROJO-BLANCO

2 Uni

RET ENERGIA -48

ROJO-BLANCO

2 Uni

MOVISTAR

AZUL-BLANCO

1 Uni

RET ETHERNET

NEGRO-BLANCO

2 Uni

RET ATERRAMIENTO

NEGRO-BLANCO

2 Uni

For internal use Unique document identifier (ID) / Version number / Life cycle status

146

Nokia Siemens Networks 2012

Dept. / Author / Date

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conexin de alarmas externas y configuracin en WCDMA FSEB + Eltek2000 / MicroEltek / MiniEltek / ZTE
INBR SEVERITY INPUT TEXT(S) [PLANTILLA]

INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 INPUT 6 INPUT 7 INPUT 8 INPUT 9 INPUT 10

*** ** *** *** *** *** ** *** *** ***

TEXT ID 26 ELTEK, ALARMA MAYOR TEXT ID 27 ELTEK, ALARMA MENOR TEXT ID 28 ELTEK, FALLA RED AC TEXT ID 29 ELTEK, PUERTA ABIERTA TEXT ID 166 FLEXIEDGE, ALTA TEMPERATURA EN SALA O GABINETE TEXT ID 167 FLEXIEDGE, FALLA DE RED AC PUBLICA TEXT ID 168 FLEXIEDGE, FALLA DE BALIZA TEXT ID 169 FLEXIEDGE, PUERTA ABIERTA SALA O GABINETE TEXT ID 170 FLEXIEDGE, G/E FUNCIONANDO TEXT ID 171 FLEXIEDGE, NIVEL DE COMBUSTIBLE

Estas son las alarmas que se deben definir en la WCDMA, las primeras cuatro alarmas aplican siempre cuando este el ELTEK y las dems cuando APLIQUEN ( EXTERNAS MV )

For internal use Unique document identifier (ID) / Version number / Life cycle status

147

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Configuracin de alarmas en el comisioning WCDMA.

Esta es la forma correcta de configurar alarmas en WCDMA, recordar que las alarmas 6, 7 y 9 son aquellas que entrega obra civiles y deben quedar configuradas, activadas y probadas con el LIC.

For internal use Unique document identifier (ID) / Version number / Life cycle status

148

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

SALIDA CONECTOR EAC WCDMA

Este cable que sale del puerto EAC debe conectarse en la caja de alarmas FSEB , puerto xxxx

For internal use Unique document identifier (ID) / Version number / Life cycle status

149

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Cable FSAA proveniente Del WCDMA Flexi Edge.

Este extremo del cable debe llegar a la caja de alarmas (FSEB).

Como se puede apreciar en la fotografa de arriba, el cable proveniente del (WCDMA) debe llegar a la caja de alarmas (FSEB).

For internal use Unique document identifier (ID) / Version number / Life cycle status

150

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Cableado de alarmas en el FSEB

EXTERNA 1 EXTERNA 2 EXTERNA 3 EXTERNA 4 EXTERNA 5 EXTERNA 6 EXTERNA 7 EXTERNA 8 EXTERNA 9 EXTERNA 10 EXTERNA 11 EXTERNA 12

1 12

1 12

For internal use Unique document identifier (ID) / Version number / Life cycle status

151

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

CABLEADO ALARMAS EXTERNAS EN FSEB-ELTEK

COMO PODEMOS APRECIAR EN LA FOTOGRAFIA LAS PRIMERAS CUATRO ALARMAS SON LAS DEL ELTEK Y EXTERNA 6, 7 Y 9 SON ALARMAS EXTERNAS DEL CLIENTE

For internal use Unique document identifier (ID) / Version number / Life cycle status

152

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Descripcin de alarmas y Conexin de alarmas en ELTEK

For internal use Unique document identifier (ID) / Version number / Life cycle status

153

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Descripcin de alarmas y Conexin de alarmas en ELTEK

For internal use Unique document identifier (ID) / Version number / Life cycle status

154

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Descripcin de alarmas y Conexin de alarmas en Micro Eltek

Desde el FSEB hacia la Micro ELTEK se deben cablear las siguientes alarmas:

Falla de AC = Relay # 6 Falla de rectificador = Relay # 5 Falla de Bateras = Relay # 2 Puerta Abierta Eltek = Relay # 1
For internal use Unique document identifier (ID) / Version number / Life cycle status

EXTERNA 3 EXTERNA 2 EXTERNA 1 EXTERNA 4

155

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Descripcin de alarmas y Conexin de alarmas en Micro Eltek

For internal use Unique document identifier (ID) / Version number / Life cycle status

156

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Descripcin de alarmas y Conexin de alarmas en Micro Eltek

For internal use Unique document identifier (ID) / Version number / Life cycle status

157

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Conexionado de alarmas en equipo rectificador ZTE

For internal use Unique document identifier (ID) / Version number / Life cycle status

158

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

159

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

160

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

161

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

162

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Alarmas externas del sistema DAS

Las alarmas externas del sistema DAS se toman de un conector DB9 que se encuentra en la parte posterior del Main Hub en los pines 7 y 8, los que a su vez se conectan a la caja de alarmas FSEB a partir de la posicin # 12 y as consecutivamente dependiendo de la cantidad de main hub existentes en el sistema.

For internal use Unique document identifier (ID) / Version number / Life cycle status

163

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Para el comisionamiento en el nodo B se debe configurar como Falla Sistema Das, como una alarma Mayor indicando cul es el equipo averiado y sector que afecta. Una vez comisionado se deben hacer las pruebas para ver si se refleja la alarma y posteriormente comprobarlas con Supervisin.
For internal use Unique document identifier (ID) / Version number / Life cycle status

164

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instalacin de equipo de energa, caja de alarmas FSEB en gabinete FCOA

For internal use Unique document identifier (ID) / Version number / Life cycle status

165

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

166

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

167

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

168

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

169

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instructivo de apertura y cierre de Radomo

For internal use Unique document identifier (ID) / Version number / Life cycle status

170

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instructivo de apertura y cierre de Radomo

For internal use Unique document identifier (ID) / Version number / Life cycle status

171

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instructivo de apertura y cierre de Radomo

For internal use Unique document identifier (ID) / Version number / Life cycle status

172

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instructivo de apertura y cierre de Radomo

For internal use Unique document identifier (ID) / Version number / Life cycle status

173

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instructivo de apertura y cierre de Radomo

For internal use Unique document identifier (ID) / Version number / Life cycle status

174

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instructivo de apertura y cierre de Radomo

For internal use Unique document identifier (ID) / Version number / Life cycle status

175

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instructivo de apertura y cierre de Radomo

For internal use Unique document identifier (ID) / Version number / Life cycle status

176

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instructivo de apertura y cierre de Radomo

For internal use Unique document identifier (ID) / Version number / Life cycle status

177

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instructivo de apertura y cierre de Radomo

For internal use Unique document identifier (ID) / Version number / Life cycle status

178

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instructivo de apertura y cierre de Radomo

For internal use Unique document identifier (ID) / Version number / Life cycle status

179

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instructivo de apertura y cierre de Radomo

For internal use Unique document identifier (ID) / Version number / Life cycle status

180

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instructivo de apertura y cierre de Radomo

For internal use Unique document identifier (ID) / Version number / Life cycle status

181

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Instructivo de apertura y cierre de Radomo

For internal use Unique document identifier (ID) / Version number / Life cycle status

182

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

183

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Etiquetado 3G Movistar

For internal use Unique document identifier (ID) / Version number / Life cycle status

184

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Etiquetado 3G Movistar

For internal use Unique document identifier (ID) / Version number / Life cycle status

185

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Etiquetado 2G MOVISTAR

For internal use Unique document identifier (ID) / Version number / Life cycle status

186

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Etiquetado 2G MOVISTAR

For internal use Unique document identifier (ID) / Version number / Life cycle status

187

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Etiquetado 2G MOVISTAR

For internal use Unique document identifier (ID) / Version number / Life cycle status

188

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Etiquetado 2G MOVISTAR

For internal use Unique document identifier (ID) / Version number / Life cycle status

189

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Comisionamiento de BTS.

For internal use Unique document identifier (ID) / Version number / Life cycle status

190

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Comisionamiento de BTS.

For internal use Unique document identifier (ID) / Version number / Life cycle status

191

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Comisionamiento de BTS.

For internal use Unique document identifier (ID) / Version number / Life cycle status

192

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Comisionamiento de BTS

For internal use Unique document identifier (ID) / Version number / Life cycle status

193

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Comisionamiento de BTS.

For internal use Unique document identifier (ID) / Version number / Life cycle status

194

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Comisionamiento de BTS.

For internal use Unique document identifier (ID) / Version number / Life cycle status

195

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Integracin de BTS

For internal use Unique document identifier (ID) / Version number / Life cycle status

196

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Integracin de BTS

For internal use Unique document identifier (ID) / Version number / Life cycle status

197

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Integracin de BTS

For internal use Unique document identifier (ID) / Version number / Life cycle status

198

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Integracin de BTS

For internal use Unique document identifier (ID) / Version number / Life cycle status

199

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Integracin de BTS

For internal use Unique document identifier (ID) / Version number / Life cycle status

200

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Integracin de BTS

For internal use Unique document identifier (ID) / Version number / Life cycle status

201

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

Integracin de BTS

For internal use Unique document identifier (ID) / Version number / Life cycle status

202

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

For internal use Unique document identifier (ID) / Version number / Life cycle status

203

Nokia Siemens Networks 2012

You can setup the color/gradient and outline style of selected shapes with the Shape_set_color_and_gradient macro, or by clicking

GRACIAS!!

For internal use Unique document identifier (ID) / Version number / Life cycle status

204

Nokia Siemens Networks 2012

Anda mungkin juga menyukai