waterwell
Dando Watertec 6
The Dando Watertec 6 is a versatile compact strong rig capable of drilling water wells in excess of 200m deep. With various mounting options this exceptional rig is very popular across the world.
Standard Rotation (max) 192rpm Torque (max) 4050Nm Other options available Rotary head tilt and side shift As standard - Box type drill table with removable drill rod and casing guides. Break out system is a double acting hydraulic cylinder with adjustable wrench Maximum single line pull: 2040kgs Maximum single line pull: 1326kgs Maximum speed: 41m/minute Maximum speed: 15m/minute Other options available
Drum capacity: 57m of 10mm wire rope Drum capacity: 30m of 8mm wire rope
Standard: Hydraulically driven Maximum flow rate: (150gpm) 568 litres/minute 5" x 6" duplex mud pump Maximum discharge pressure: 310psi Standard: Hydraulically driven triplex pump Maximum flow rate: 34 litres/minute Maximum discharge pressure: 500psi
Fitted as standard and used when operating a DTH hammer Hydraulic power circuit based on load sensing hydraulic pumps and proportional control valves Uncomplicated and user friendly with ergonomic layout Various options available Two front and two rear jacks with individual locking valves Rig is provided with mast and control panel lighting and the electrical system is 12 volt 31/2" (13.5kgs/m) drill rod = 356m 41/2" (23kgs/m) drill rod = 209m RC Drilling Conversion Kit - For light duty reverse circulation drilling applications Centrifugal Mud Pump - Supply to customers specification Other options available on request
Please note: All figures and claims made here are indicative and Dando Drilling International reserves the right to make alterations to specification detail without notice. All images are for reference only and may not represent the exact specification outlined in this document.
Dando Drilling International Limited www.dando.co.uk info@dando.co.uk tel: +44 (0)1903 731312 fax: +44 (0)1903 730305