Anda di halaman 1dari 18

JC International Limited

RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26107 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26108 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26109 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26110 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

10

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26111 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26112 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

11

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26113 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26114 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

12

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26115 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26116 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

13

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26117 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26118 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

14

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26119 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26120 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

15

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26121 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No. 26122 Identification Number

Date of Examination 17/11/2013 Qty

Examiner STANLEY IREHIE

Qualifications FMLP, NDT LEVEL II MT, PT & UT

Description of Equipment

TENSIONER RING PADEYE

16

Tensioner Ring Padeye SWL: 99223kg

Date of next Examination:


LOCATION: STBD CRANE
SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible

16/05/14
TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Stressed Areas and Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 17/11/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No.

Date of Examination 02/12/2013 Qty

Examiner STANLEY IREHIE TARE WT

Qualifications FMLP, NDT LEVEL II MT, PT & UT SWL GROSS WT Proof Load Applied Date of next
Examination

26039
Identification Number

Description of Equipment

ACCOUSTIC ACCUMULATOR RACK PADEYE 01/06/14

AAR-1

Accoustic Accumulator Rack Padeye

N/A

3000lbs

N/A

N/A

LOCATION: SUBSEA AREA


SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 02/12/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

JC International Limited
RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: service@jcinternationalng.com Website: www.jcinternationalng.com

CERTIFICATE OF VISUAL EXAMINATION AND MPI


STATUTORY INSTRUMENTS 1998 NO. 2307 The Lifting Operations and Lifting Equipment Regulations 1998 STATUTORY INSTRUMENTS 1992 NO. 3073 The Supply of Machinery (Safety) Regulations 1992 STATUTORY INSTRUMENTS 1998 NO. 2306 The Provision and use of Work Equipment Regulations 1998 Factories Act CAP. 126 L.F.N 1990

Certificate No.

Date of Examination 02/12/2013 Qty

Examiner STANLEY IREHIE TARE WT

Qualifications FMLP, NDT LEVEL II MT, PT & UT SWL GROSS WT Proof Load Applied Date of next
Examination

26040
Identification Number

Description of Equipment

ACCOUSTIC ACCUMULATOR RACK PADEYE 01/06/14

AAR-2

Accoustic Accumulator Rack Padeye

N/A

3000lbs

N/A

N/A

LOCATION: SUBSEA AREA


SPECIFICATION : BS 2573, ASTM E 1444 MPI METHOD: Wet Visible TEST PROCEDURE: CONTRAST MEDIA: INDICATOR: JOP-020 White Contrast Aid Black Magnetic Ink

PARTS EXAMINED: Welded Joint RESULTS: No defect as at the time of inspection. Fit for use

Name and address of equipment owner:

Address of premises where Test / Examination was held: PACIFIC BORA

PACIFIC DRILLING

We hereby certify that on 02/12/2013 (date) no defect was found on the item/s described on this Certificate as at the time of inspection. Fit for use Signature of Inspector: Conducting Examination
th

Name of Inspector: STANLEY IREHIE Conducting: Examination only

Revision No: R01

Effective Date: 29 August 2013

Doc No: JCI-C-VMPI-01

Anda mungkin juga menyukai