Carbon Fabrics Carbon Fibre Roving Carbon Fabrics (Multiaxial) Aramid Fabrics Hy brid Fabrics Carbon Design Fabrics 3D-Design Fabrics Spread-Tow Carbon Fabric Printed Non-Wov en Glass Glass Filament Fabric with Silane Glass Filament Fabric with Finish Glass Rov ing Fabrics Combo Mat Chopped Strand Mat Chopped Strand Mat ECR-Glass C-Glasvs Non-Woven Mould-Making Fabrics Multiaxial Glass Fabrics Carbon Fabric Tape Glass Fabric Tape Sandwich Material
Page
4-9 9 10 - 14 15 16 17 17 18 - 19 20 21 - 24 25 - 30 31 - 32 32 - 33 34 - 35 35 36 High Lev el Laminate Resin System 37 38 - 41 42 - 43 44 - 45 Epoxy Cov ering Systems 46 - 47 Casting Resin Systems Injection-Process Resin System Epoxy Resin, approved by the Germanische Lloy d Adhesiv e- / Laminate Resin System Standard Laminate Resin System PU Vacuum-Hose IQS-Push-In Connector Standard Push-In Connector Manometer Vacuum Pump
Page
56 57 59 60 60
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Colour / Coating
In-Mould Coating System 2K PUR Top Coat
Page
94 95
Tools
Degasser roller Degasser Roller Sets / Accessories Replacement- / Foam rollers
Page
104 - 105 106 106 - 108 108 - 110 110
Page
96 - 97 96 97 98 98 98
Cleanser / Thinner
Acetone XB- Thinner In-Mould-Thinner 99 99 99
Fillers / Additive
System Degasser Chopped Glass Fibres Cotton Flocks Micro Balloons Thixotropy Powder Colour Pigments 100 100 101 101 102 103
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
C A RBO N F A B RI C S - HI G H S T RENG T H F I B R ES
Carbon-fibres have a variety of properties. In addition to a low specific weight they have a high strength and stiffness, they are chemically inert, electroconductive, thermally stable, infusible, biocompatible and permeable
Carbon Fabrics
for X-rays. This enables an application in various fields. Responsible for these excellent properties is the chemical bond of the carbon atoms in the graphit-similar structure of the fibres.
The field of application is very varied and the potential has not been exhausted yet by far!
Tw ill
characteristically are diagonally running lines better drapability than plain weav e less slip-resistant suitable f or complicated geometries
Satin
- suitable f or complicated geometries - v ery good drapability - low slip-resistant - less mesh crossing, therefore strength in the laminate - giv es a very smooth surface
Race Seat Shell for Ferrari 360/430 Manufactures w ith the IMC/MTI -Process
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Weight: 80g/m
Weave: Plain
Width: 100cm
HT-Fibre / 1K 67tex
/m /m /m /m /m
Sandwich construction, model making, thin coating and boat constructions, carbon design, airplane model construction,
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 96g/m, laminate thic kness: 0,13mm, laminate weight: 176g/m
Weight: 93g/m
Weave: Plain
Width: 100cm
Fields of application: /m 58,80 /m 54,95 /m 52,29 /m 49,49 /m 47,89 On request /m /m /m /m /m Sandwich construction, model making, thin coating and boat constructions., carbon design, Tight mesh due to the use of fine yarn and high number of threads. Suitable f or epoxy resin.
HT-Fibre / 1K 67tex
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 112g/m, laminate thic kness: 0,15mm, l aminate weight: 205g/m
Weight: 160g/m
Weave: Plain
Widht: 100cm
Fields of application: 23,90 20,90 19,90 17,90 16,50 15,50 /m /m /m /m /m /m Model making, boat construction, motor sport, sports equipment
HT-Fibre / 3K 200tex
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 192g/m, laminate thic kness: 0,26mm, l aminate weight: 352g/m
Weight: 160g/m
Weave: Twill
Width: 100cm
Fields of application: 23,90 20,90 19,90 17,90 16,50 15,50 /m /m /m /m /m /m Model making, boat construction, motor sport, sports equipment
HT-Fibre / 3K 200tex
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 192g/m, laminate thic kness: 0,26mm, l aminate weight: 352g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
Carbon Fabrics
Fields of application:
Weight: 195g/m
Weave: Plain
Width: 100cm
Carbon Fabrics
Fields of application: from 1m from 5m from 10m from 25m from 50m from 100m 24,50 21,50 20,50 18,48 17,90 17,50 /m /m /m /m /m /m Model making, motor sports, boat construction, sportsequipment, carbon design Suitable f or epoxy resin.
HT-Fibre / 3K 200tex
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 234g/m, laminate thic kness: 0,31mm, l aminate weight: 429g/m
Weight: 195g/m
Weave: Twill
Width: 100cm
Fields of application: 24,50 21,50 20,50 18,48 17,90 17,50 /m /m /m /m /m /m Model making, motor sports, boat construction, sportsequipment, carbon design Suitable f or epoxy resin.
HT-Fibre/ 3K 200tex
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 234g/m, laminate thic kness: 0,31mm, l aminate weight: 429g/m
Weight: 200g/m
Weave: Plain
Width: 100cm
Fields of application: Model making, motor sports, boat construction, sportsequipment, carbon design
HT-Fibre / 3K 200tex
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 240g/m, laminate thic kness: 0,32mm, l aminate weight: 440g/m
Weight: 200g/m
Weave: Twill
Width: 100cm
Fields of application: 24,90 21,84 20,90 18,90 18,48 17,90 /m /m /m /m /m /m Model making, motor sports, boat construction, sportsequipment, carbon design
HT-Fibre/ 3K 200tex
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 240g/m, laminate thic kness: 0,32mm, l aminate weight: 440g/m
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Weight: 245g/m
Weave: Twill
Width: 100cm
HT-Fibre / 3K 200tex
/m /m /m /m /m /m
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 288g/m, laminate thic kness: 0,39mm, l aminate weight: 528g/m
Weight: 245g/m
Weave: Twill
Width: 125cm
Fields of application: 31,90 28,90 26,85 24,90 23,90 22,90 /m /m /m /m /m /m Model making, motor sports, boat construction, sportsequipment, carbon design
HT-Fibre / 3K 200tex
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 288g/m, laminate thic kness: 0,39mm, l aminate weight: 528g/m
Weight: 245g/m
Weave: Twill
Width: 150cm
Fields of application: Model making, motor sports, boat construction, sportsequipment, carbon design. **especially for engine hood.** Suitable f or epoxy resin.
HT-Fibre / 3K 200tex
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 288g/m, laminate thic kness: 0,39mm, l aminate weight: 528g/m
Weight:
Weave: Twill
Width: 100cm
One side with EP-Binder (slippage resistant) 245g/m Price (/m): from 1m from 5m from 10m from 25m from 50m from 100m Incl.VAT 41,53 37,96 35,58 32,01 30,82 29,63 /m /m /m /m /m /m net 34,90 31,90 29,90 26,90 25,90 24,90 /m /m /m /m /m /m
Fields of application: Model making, motor sports, boat construction, sportsequipment, carbon design
HT-Fibre / 3K 200tex
This Carbon Fabric is equipp ed one-sid ed with an EP-binder which pr events fraying when you cut the f abric to size. Furthermore you can pr eform the fabric with heat. (EP-Binder approx. 10-15g/m) Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 288g/m, laminate thic kness: 0,39mm, l aminate weight: 528g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
Carbon Fabrics
Fields of application:
Weave: Twill
Width: 125cm
Carbon Fabrics
Price (/m): from 1m from 5m from 10m from 25m from 50m from 100m
Fields of application: Model making, motor sports, boat construction, sportsequipment, carbon design
HT-Fibre / 3K 200tex
** This Carbon F abric is equipped one- sided with a thermoplast fixation. ** ** Advantages: + no frazzle when cutting + no points, which will be m arket on the fabric/laminate. ** Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 288g/m, laminate thic kness: 0,39mm, l aminate weight: 528g/m
Weight: 285g/m
Width: 100cm
Fields of application: Model making, motor sports, boat construction, sportsequipment, carbon design
HT-Fibre / 3K 200tex
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 342g/m, laminate thic kness: 0,46mm, l aminate weight: 627g/m
Weight: 400g/m
Weave: Plain
Width: 100cm
Fields of application: 24,90 21,84 20,90 18,90 17,90 17,50 /m /m /m /m /m /m Model making, boat construction, motor sport, sportsequipment
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 480g/m, laminate thic kness: 0,64mm, l aminate weight: 880g/m
Weight: 420g/m
Weave: Twill
Width: 100cm
Fields of application: 25,50 22,50 21,50 19,50 18,48 17,90 /m /m /m /m /m /m Model making, motor sports, boat construction, sportsequipment, carbon design
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 530g/m, laminate thic kness: 0,67mm, l aminate weight: 924g/m
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Weight: 600g/m
Weave: Twill
Width: 100cm
/m /m /m /m /m /m
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 720g/m, laminate thic kness: 0,96mm, l aminate weight: 1320g/m
Incl.VAT 12,97
6,90
Fibre: Density: Tensile Modulus: Fibre Diameter Filament count: Weight: Suitable f or:
Panex 35 1,81 g/m 241 GPa 7,2 m 50.000 = 50K approx. 3,75 g/m Epoxy resins ** Suitable for hand laminating, winding and pultrusion**
100m (375g)
Basic price/100g
23,68
6,31
19,90
5,30
250m (938g)
Basic price/100g
41,53
4,42
34,90
3,72
190,28
3,28
159,90
2,70
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
Carbon Fabrics
Fields of application:
Carbon Fabrics
Bidiagonal: - The f ibres lie crossed on top of each other in 2 different directions - Orientation can be: 0 /90, +/-45
+45
0 90
- 45 + 45 Triaxial: - The f ibres lie in 3 layers on top of each other - Orientation can be e.g. 0/+45/-45 - 45 + 45 Quadraxial: - The f ibres lie in 4 layers on top of each other - Orientation can be e.g. 0/+45/-45/90 90 - 45 Advantages of multiaxial fabrics compared with conventional fabrics high drapability depending on weight and sewing better mechanical properties easy handling, the f abric remains stable even when cutting good wet out and lower resin cunsumption load oriented f ibre orientation high-quality surfaces through lower fibre impression 0 0 + 45 90 - 45
Unidirectional Carbon Fabric - Thermofixed With these lightweight unidirectional non-woven fabric you reach optimal component properties with an almost unbeatable price-performance ratio. The extremely fine and flat fixation does allow a simple and load-oriented fibre orientation in the component. Article: HP-U050/50C UD Carbon Fabric
Price (/m): from 1m from 5m from 10m from 25m from 50m Incl. VAT 10,70 /m 9,76 /m 8,93 /m 8,27 /m 7,74 /m net Fields of application: 8,99 8,20 7,50 6,95 6,50 /m /m /m /m /m Model making, motor sports, boat construction, sportsequipment. Suitable f or epoxy resin. Weight: 50g/m Construction: Width: 0 50cm Fibre: HT-Fibre / 50K
Calculated data for hand l ami nate with 45% volume fibres: resin c onsumption: 39,5g/m, laminate thic kness: 0,06mm, lami nate weight: 89,5g/m
10
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Fields of application: 9,50 8,70 7,99 7,35 6,90 /m /m /m /m /m Model making, motor sports, boat construction, sportsequipment. Suitable f or epoxy resin.
Calculated data for hand l ami nate with 45% volume fibres: resin c onsumption: 65g/m, laminate thic kness: 0,10mm, laminate weight: 145g/m
Fields of application: 9,90 8,98 8,30 7,65 7,10 /m /m /m /m /m Model making, motor sports, boat construction, sportsequipment. Suitable f or epoxy resin.
Calculated data for hand l ami nate with 45% volume fibres: resin c onsumption: 80g/m, laminate thic kness: 0,12mm, laminate weight: 180g/m
Fields of application: 12,95 /m 11,90 /m 10,90 /m 9,90 /m 8,85 /m Model making, motor sports, boat construction, sportsequipment, mould and tank construction, masts, rotor blades Suitable f or epoxy resin.
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 240g/m, laminate thic kness: 0,32mm, l aminate weight: 440g/m
Fields of application: 18,90 /m 16,90 /m 15,90 /m 14,45 /m 12,75/m Model making, motor sports, boat construction, sportsequipment, mould and tank construction, masts, rotor blades Suitable f or epoxy resin.
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 360g/m, laminate thic kness: 0,48mm, l aminate weight: 660g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
11
Carbon Fabrics
Carbon Fabrics
Price (/m): from 1m from 5m from 10m from 25m from 60m
Areas of application: Model making, motor sports, boat construction, sportsequipment, mould and tank construction, masts, rotor blades Suitable f or epoxy resin.
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 600g/m, laminate thic kness: 0,80mm, l aminate weight: 1100g/m
Bidiagonal Carbon Fabric - Stitched together with a polyester thread Article: HP-B080C*
Bidiagonal Carbon Fabric Price (/m): from 1m from 5m from 10m from 25m from 63,5m Incl.VAT 27,25 24,40 22,49 20,83 18,92 /m /m /m /m /m net 22,90 20,50 18,90 17,50 15,90 /m /m /m /m /m Weight: 80g/m Construction: Width: + 45/ - 45 127cm Fibre: HT-Fibre/ 24K
+45 40g/m 40g/m
-45
Very light and good drapability. Torsion ar eas c an be l am i nated without fabric waste. Calculated data for hand l ami nate with 40% volume fibres: resin c onsumption: 85g/m, laminate thic kness: 0,13mm, laminate weight: 173g/m
Article: HP-B100C*
Bidiagonal Carbon Fabric Price (/m): from 1m from 5m from 10m from 25m from 63,5m Incl.VAT 24,87 22,49 20,83 18,92 17,73 /m /m /m /m /m net 20,90 18,90 17,50 15,90 14,90 /m /m /m /m /m
Weight: 100g/m
-45
Very light and good drapability. Torsion ar eas c an be l am i nated without fabric waste. Calculated data for hand l ami nate with 40% volume fibres: resin c onsumption: 97g/m, laminate thic kness: 0,14mm, laminate weight: 197g/m
Article: HP-B141C*
Bidiagonal Carbon Fabric Price (/m): from 1m from 5m from 10m from 25m from 63,5m Incl.VAT 24,87 22,49 20,83 18,92 17,73 /m /m /m /m /m net 20,90 18,90 17,50 15,90 14,90 /m /m /m /m /m
Weight: 140g/m
Areas of application: Model making, motor sports, boat construction, sportsequipment, mould and tank
Very light and good drapability. Torsion ar eas c an be l am i nated without fabric waste. Calculated data for hand l ami nate with 40% volume fibres: resin c onsumption: 136g/m, laminate thic kness: 0,20mm, l aminate weight: 276g/m
* Due to the low weight of HP-B080C, HP-B100C and HP-B141C, gap s on the fabr ics ar e possible. Such gaps do not constitute from bad quality.
12
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Artikel: HP-B200C
Bidiagonal Carbon Fabric Price (/m): from 1m from 5m from 10m from 25m from 63,5m Incl.VAT 21,30 19,64 17,73 16,54 15,35 /m /m /m /m /m net 17,90 16,50 14,90 13,90 12,90 /m /m /m /m /m
Weight: 200g/m
Fibre:
Areas of application: Model making, motor sports, boat construction, sportsequipment, mould and tank construction, rotor blades Suitable f or epoxy resin.
+45 -45
100g/m 100g/m
Very light and good drapability. Torsion ar eas c an be l am i nated without fabric waste. Calculated data for hand l ami nate with 40% volume fibres: resin c onsumption: 194g/m, laminate thic kness: 0,28mm, l aminate weight: 394g/m
Article: HP-B305C
Bidiagonal Carbon Fabric Price (/m): from 1m from 5m from 10m from 25m from 63,5m Incl.VAT 22,49 20,41 18,68 17,49 16,42 /m /m /m /m /m net 18,90 17,15 15,70 14,70 13,80 /m /m /m /m /m
Weight: 300g/m
Fields of application: Model making, motor sports, boat construction, sportsequipment, mould and tank construction. Suitable f or epoxy resin.
Calculated data for hand l ami nate with 40% volume fibres: resin c onsumption: 290g/m, laminate thic kness: 0,42mm, l aminate weight: 590g/m
Article: HP-B415C
Bidiagonal Carbon Fabric Price (/m): from 1m from 5m from 10m from 25m from 63,5m Incl.VAT 30,82 26,42 24,63 21,66 20,11 /m /m /m /m /m net 25,90 22,20 20,70 18,20 16,90 /m /m /m /m /m
Weight: 410g/m
Fields of application: Model making, motor sports, boat construction, sportsequipment, mould and tank
Calculated data for hand l ami nate with 40% volume fibres: resin c onsumption: 400g/m, laminate thic kness: 0,58mm, l aminate weight: 810g/m
Article: HP-B600C
Bidiagonal Carbon Fabric Price (/m): from 1m from 5m from 10m from 25m from 63,5m Incl.VAT 35,58 32,73 29,63 27,25 25,59 /m /m /m /m /m net 29,90 27,50 24,90 22,90 21,50 /m /m /m /m /m
Weight: 605g/m
Fields of application: Model making, motor sports, boat construction, sportsequipment, mould and tank
Calculated data for hand l ami nate with 40% volume fibres: resin c onsumption: 586g/m, laminate thic kness: 0,85mm, l aminate weight: 1191g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
13
Carbon Fabrics
HT-Fibre / 50K
Article: HP-T450C
Triaxial Carbon Fabric Price (/m): Incl.VAT 32,73 28,44 25,94 24,40 22,49 /m /m /m /m /m net 27,50 23,90 21,80 20,50 18,90 /m /m /m /m /m
Weight: 455g/m
Carbon Fabrics
Fields of application: Model making, motor sports, boat construction, sportsequipment, mould and tank
Calculated data for hand l ami nate with 40% volume fibres: resin cons umption: 436g/m, laminate thic kness: 0,63mm, laminate weight: 886g/m
Article: HP-Q600C
Quadraxial Carbon Fabric Price (/m): from 1m from 5m from 10m from 25m from 63,5m Incl.VAT 39,15 35,11 32,01 29,63 27,97 /m /m /m /m /m net 32,90 29,50 26,90 24,90 23,50 /m /m /m /m /m
Weight: 604g/m
Construction: 0/-45/90/+45
Width: 127cm
Fields of application: Model making, motor sports, boat construction, sportsequipment, mould and tank
90
+45
Calculated data for hand l ami nate with 40% volume fibres: resin cons umption: 581g/m, laminate thic kness: 0,84mm, laminate weight: 1181g/m
14
www.hp-textiles.com
E-Mail: info@hp-textiles.com
A RA M I D FA BRI C
Aramid fibres are characterized by a high tenacity, a very good impact strength and abrasion resistance. Further properties are e.g. a good dampening ability, excellent chemical resistance and non-flammability. Working with the raw fabric and the laminates is often hard and therefore it is recommended to use special tools.
Article: HP-P60A
Aramid Fabric
Weight: 61g/m
Weave: Plain
Width: 100cm
Price (/m): from 1m from 5m from 10m from 25m from 50m from 100m
net Fields of application: 27,50 24,30 22,30 20,90 19,90 18,90 /m /m /m /m /m /m sandwich construction, model making, aircraf t construction, sportsequipment, high-strength coating Suitable f or epoxy resin. Aramid 22tex
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 86g/m, laminate thic kness: 0,12mm, laminate weight: 147g/m
Article: HP-T172A
Aramid Fabric
Weight: 170g/m
Weave: Twill
Width: 100cm
Price (/m): from 1m from 5m from 10m from 25m from 50m from 100m
net Fields of application: 21,40 18,90 17,90 15,90 14,90 12,90 /m /m /m /m /m /m sandwich construction, model making, aircraf t construction, sportsequipment, high-strength coating Suitable f or epoxy resin.
Aramid 121tex
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 240g/m, laminate thic kness: 0,335mm, laminate weight: 410g/m
Article: HP-P170A
Aramid Fabric
Weight: 170g/m
Weave: Plain
Width: 120cm
Price (/m): from 1m from 5m from 10m from 25m from 50m from 120m
net Fields of application: 21,40 18,90 17,90 15,90 14,90 12,90 /m /m /m /m /m /m sandwich construction, model making, aircraf t construction, sportsequipment, high-strength coating Suitable f or epoxy resin. Aramid 121tex
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 240g/m, laminate thic kness: 0,34mm, l aminate weight: 410g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
15
Aramid Fabrics
HY B RI D FA B RI C
Hybrid Fabrics combine the good properties of the Carbon Fabrics with the ones of the Aramid Fabrics.
Hybrid Fabrics
Through the Carbon Fibres the fabric gets a high stiffness and the Aramid Fibres give the fabric a high impact strength, tensile strength, capacity and wear resistance.
Article: HP-P180AC
Hybrid Fabric
Weight: 180g/m
Weave: Plain
Width: 100cm
Price (/m): from 1m from 5m from 10m from 25m from 50m from 100m
net Fields of application: 23,90 20,90 19,90 18,48 17,50 16,50 /m /m /m /m /m /m sandwich construction, model making, aircraf t construction, sportsequipment, high-strength coating Suitable f or epoxy resin.
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 230g/m, laminate thic kness: 0,3mm, laminate weight: 410g/m
Article: HP-T205AC
Hybrid Fabric
Weight: 205g/m
Weave: Twill
Width: 100cm
Price (/m): from 1m from 5m from 10m from 25m from 50m from 100m
net Fields of application: 24,90 22,50 20,90 19,50 18,48 17,50 /m /m /m /m /m /m sandwich construction, model making, aircraf t construction, sportsequipment, high-strength coating Suitable f or epoxy resin.
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 260g/m, laminate thic kness: 0,36mm, l aminate weight: 465g/m
16
www.hp-textiles.com
E-Mail: info@hp-textiles.com
C A RBO N- D ES I G N- F A B RI C
With the coloured Carbon Fabrics you achieve unique and fascinating surface coatings. A three-dimensional carbon look paired with noble coloured design. Due to the tight weaving it is on the one hand slip-resistant and on the other hand good drapable and cuddly. Therefore it is suitable for flat components, roundings and complex geometries.
Weave: Twill
Width: 100/120cm
Fields of application: 57,90 54,90 49,90 47,90 45,75 /m /m /m /m /m v ehicle parts, sportsequipment, helmets, f urnishing Suitable f or epoxy resin.
Weave: Twill
Width: 100/120cm
Fields of application: 57,90 54,90 49,90 47,90 45,75 /m /m /m /m /m v ehicle parts, sportsequipment, helmets, f urnishing Suitable f or epoxy resin.
3 D- DES I G N- F A BRI C
The 3D-Design-Fabrics are especially developed for design applications. These Glass Filament Fabrics are aluminized on one side. Components get an unique and three-dimensional look with a metallic lustre and iridescent depth when they are refined with these fabrics. Fields of application: cars and motorbikes, ski and snowboards, kick- and skateboards, furniture und decorative parts, exhibition stands and shopfitting Article: HP-T300EA
Price (/m): ab 1m ab 5m ab 10m ab 25m ab 50m ab 100m Incl.VAT 17,79 /m 15,89 /m 14,49 /m 12,97 /m 11,29 /m 9,98 /m
Alustyle
net 14,95 /m 13,35 /m 12,18 /m 10,90 /m 9,49 /m 8,39 /m
Weave: Twill
Width: 100cm
** The Alustyle is very smooth, has a good drapability and slip-resistance.** HP-Textiles Otto-Hahn-Strasse 22 D-48480 Schapen
17
Design Fabrics
Weight: 160g/m
Weave: Plain
Width: 100cm
Spread Tow Carbon Fabric strand width: approx. 15mm Fields of application: Model making, motor sports,
Weight: 160g/m
Weave: Plain
Width: 100cm
Spread Tow Carbon Fabric strand width: approx. 25mm Fields of application: Model making, motor sports, sports equipent , carbon design Suitable f or epoxy resin
HT-Fibre / 15K
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 192g/m, laminate thic kness: 0,26mm, l aminate weight: 352g/m
Weight: 160g/m
Weave: Twill
Width: 100cm
Spread Tow Carbon Fabric strand width: approx. 15mm Fields of application: Model making, motor sports,
18
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Weight: 193g/m
Weave: Plain
Width: 127cm
Spread Tow Carbon Fabric strand width: approx. 8,3mm Fields of application: Model making, motor sports,
HT-Fibre / 12K
Weight: 193g/m
Weave: Twill
Width: 127cm
Spread Tow Carbon Fabric strand width: approx. 8,3mm Fields of application: Model making, motor sports, sports equipent, carbon design Suitable f or epoxy resin
HT-Fibre / 12K
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 232g/m, laminate thic kness: 0,31mm, l aminate weight: 425g/m
For the 3-D fabric we recommend our epoxy resin system: HP-E25D HP-E25DM HP-E40D You will find these products on pages 78 - 79
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
19
P RI NT E D NO N- W O V EN G L A S S
Our newly developed printed Non-Woven-Glass is made of very fine and evenly distributed glass fibres. A high-quality print with very resistant colours is possible because of the smooth surface. The Non-WovenGlass is very smooth and good to handle because of the low binder content. We recommend for processing with the Non-Woven-Glass our non-sticky hardening epoxy and polyester resins. The finally look of the component is shown after hardening.
Fields of application: - sportsequipment, - furniture industry, - ski and snowboards, - kick- and skateboards, - exhibition stands and shopfitting - boat construction, - sanitary installations
Quality Features: - high quality print, - constant fibre distribution, smooth surfaces - consistent colours, - the visual appearance on the cured laminate is very nice, - low binder content, - soft and smooth, good deformability
Article: HP-V30CF
Price(/m): from 1m from 5m from 10m from 25m from 50m from 100m Incl.VAT 8,21 7,08 5,83 4,70 4,28 3,81
Camouflage effect
net 6,90 5,95 4,90 3,95 3,60 3,20 /m /m /m /m /m /m
Weight: 30g/m
Width: 100cm
/m /m /m /m /m /m
The resin consumption d epends on the underground. Only for the non- woven glass its about 250g/m.
Article: HP-V30SW
Price(/m): from 1m from 5m from 10m from 25m from 50m from 100m Incl.VAT 8,21 7,08 5,83 4,70 4,28 3,81 /m /m /m /m /m /m
Stone effect
net 6,90 5,95 4,90 3,95 3,60 3,20 /m /m /m /m /m /m
Weight: 30g/m
Width: 100cm
The resin consumption d epends on the underground. Only for the non- woven glass its about 250g/m.
Article: HP-V30WG
Price(/m): from 1m from 5m from 10m from 25m from 50m from 100m Incl.VAT 8,21 7,08 5,83 4,70 4,28 3,81 /m /m /m /m /m /m
Wood effect
net 6,90 5,95 4,90 3,95 3,60 3,20 /m /m /m /m /m /m
Weight: 30g/m
Width: 100cm
The resin consumption d epends on the underground. Only for the non- woven glass its about 250g/m.
20
www.hp-textiles.com
E-Mail: info@hp-textiles.com
G L A S S F IL AM ENT F A BRI C F O R EP O X Y A ND P O L Y ES T ER R ES I NS
The properties of textile glass materials as reinforcing materials are determined by the fineness and sizing of the spinning thread. The sizing of the thread is a thin coating based on chrome or silane compounds. It is applied with an application roll while the pulling process. The mechanical basic features (e.g. tensile strength, tensile modulus of elasticity, elongation at break) are determined by the glass type, the application and the sizing of the thread. These include smoothness and sliding ability while processing with the textiles, the compatibility of the glass surfaces and the resin matrix and hereby the implementation of the mechanical basic features onto the composite material.
G L A S S F IL AM ENT F A BRI C S W IT H S IL A NE S I Z I NG
Silane Sizing: In this manufacturing process, the sizing is already applied while producing the yarn. Fabrics which are manufactured with these yarns do not need futher treatment and they are directly applicable in the fibre compound. The fabrics with silane sizing are low-priced but have nevertheless good impregnation properties. Article: HP-P80E
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m
Glass Fabric
net 2,70 2,52 2,34 1,98 1,53 1,31 /m /m /m /m /m /m
Weight: 86g/m
Sizing: Silane
Weave: Plain
Width: 100cm
Fields of application: Sandwich construction, model making, thin coatings, boat construction
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 71g/m, laminate thic kness: 0,09mm, laminate weight: 157g/m
Article: HP-T80E
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m
Glass Fabric
net
Weight: 86g/m
Sizing: Silane
Weave: Twill
Width: 100cm
Fields of application: 2,70 2,52 2,34 1,98 1,53 1,31 /m /m /m /m /m /m Sandwich construction, model making, thin coatings, boat construction
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 71g/m, laminate thic kness: 0,09mm, laminate weight: 157g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
21
Glass-Filament-Fabrics are weaved panels consisting of endless E-Glass-yarn. The glass yarn is a spinning thread which is provided with a slight turning (approx. 20 40 turnings per meter). Glass fibre threads consist of several glass yarns which are twisted together.
Article: HP-P110E
Glass Fabric
net 2,91 2,72 2,52 2,13 1,65 1,41 /m /m /m /m /m /m
Weight: 105g/m
Sizing: Silane
Weave: Plain
Width: 100cm
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m
Fields of application: Sandwich construction, model making, thin coatings, boat construction
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 86g/m, laminate thic kness: 0,12mm, laminate weight: 191g/m
Article: HP-T110E
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 3,46 3,24 3,00 2,53 1,96 1,68
Glass Fabric
net
Weight: 105g/m
Sizing: Silane
Weave: Twill
Width: 100cm
Fields of application: /m /m /m /m /m /m 2,91 2,72 2,52 2,13 1,65 1,41 /m /m /m /m /m /m sandwich construction, model making, thin coatings
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 86g/m, laminate thic kness: 0,12mm, laminate weight: 191g/m
Article: HP-P163E
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 3,36 3,13 2,90 2,46 1,90 1,59
Glass Fabric
net 2,82 2,63 2,44 2,07 1,60 1,34 /m /m /m /m /m /m
Weight: 166g/m
Sizing: Silane
Weave: Plain
Width: 100cm
/m /m /m /m /m /m
Fields of application: sandwich construction, model making, thin coatings, boat construction, motorsports, mould and tank construction Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 136g/m, laminate thic kness: 0,18mm, l aminate weight: 302g/m
Article: HP-T163E
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 3,36 3,13 2,90 2,46 1,90 1,59
Glass Fabric
net
Weight: 166g/m
Sizing: Silane
Weave: Twill
Width: 100cm
Fields of application: /m /m /m /m /m /m 2,82 2,63 2,44 2,07 1,60 1,34 /m /m /m /m /m /m sandwich construction, model making, thin coatings, boat construction, tank and mould construction, vehicle parts, sportseSuitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 136g/m, laminate thic kness: 0,18mm, l aminate weight: 302g/m
22
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Article: HP-T211E
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 120m Incl.VAT 4,00 3,74 3,46 2,93 2,26 1,93
Glass Fabric
net
Weight: 213g/m
Sizing: Silane
Weave: Twill
Width: 120cm
Fields of application: /m /m /m /m /m /m 3,36 3,14 2,91 2,46 1,90 1,62 /m /m /m /m /m /m sandwich construction, model making, thin coatings, boat construction, tank and mould construction, vehicle parts, sportsequipment Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 175g/m, laminate thic kness: 0,25mm, l aminate weight: 408g/m
Article: HP-P220E
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 3,64 3,40 3,15 2,67 2,06 1,76
Glass Fabric
net
Weight: 224g/m
Sizing: Silane
Weave: Plain
Width: 100cm
Fields of application: /m /m /m /m /m /m 3,06 2,86 2,65 2,24 1,73 1,48 /m /m /m /m /m /m sandwich construction, model making, thin coatings, boat construction, tank and mould construction, vehicle parts, sportsequipment Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 184g/m, laminate thic kness: 0,25mm, l aminate weight: 408g/m
Article: HP-P280E
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 4,71 4,40 3,77 3,14 2,67 2,27
Glass Fabric
net
Weight: 282g/m
Sizing: Silane
Weave: Plain
Width: 100cm
Fields of application: /m /m /m /m /m /m 3,96 3,70 3,17 2,64 2,24 1,91 /m /m /m /m /m /m sportsequipment, boat construction, tank and mould construction, v ehicle parts, model making. Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 232g/m, laminate thic kness: 0,31mm, l aminate weight: 514g/m
Article: HP-T280E
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 4,71 4,40 3,77 3,14 2,67 2,27
Glass Fabric
net
Weight: 282g/m
Sizing: Silane
Weave: Twill
Width: 100cm
Fields of application: /m /m /m /m /m /m 3,96 3,70 3,17 2,64 2,24 1,91 /m /m /m /m /m /m sportsequipment, boat construction, tank and mould construction, v ehicle parts, model making. Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 232g/m, laminate thic kness: 0,31mm, l aminate weight: 514g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
23
Article: HP-P390E
Glass Fabric
net
Weight: 390g/m
Sizing: Silane
Weave: Plain
Width: 100cm
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m
Fields of application: 4,17 3,89 3,61 3,06 2,65 2,39 /m /m /m /m /m /m sportsequipment, boat construction, tank and mould construction, v ehicle parts, model making. Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 320g/m, laminate thic kness: 0,43mm, l aminate weight: 710g/m
Article: HP-T390E
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 4,96 4,63 4,30 3,64 3,15 2,85
Glass Fabric
net
Weight: 390g/m
Sizing: Silane
Weave: Twill
Width: 100cm
Fields of application: /m /m /m /m /m /m 4,17 3,89 3,61 3,06 2,65 2,39 /m /m /m /m /m /m boat construction, model making, tank and mould construction, v ehicle parts, sportsequipment Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 320g/m, laminate thic kness: 0,43mm, l aminate weight: 710g/m
Article: HP-S430E
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 7,76 6,79 5,82 4,86 4,27 3,88
Glass Fabric
net
Weight: 420g/m
Sizing: Silane
Width: 100cm
Fields of application: /m /m /m /m /m /m 6,52 5,71 4,89 4,08 3,59 3,26 /m /m /m /m /m /m boat construction, model making, tank and mould construction, v ehicle parts. Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 40% volume fibres: resin c onsumption: 280g/m, laminate thic kness: 0,40mm, l aminate weight: 700g/m
Article: HP-S660E
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 9,81 8,58 7,35 6,13 5,39 4,90
Glass Fabric
net
Weight: 660g/m
Sizing: Silane
Width: 100cm
Fields of application: /m /m /m /m /m /m 8,24 7,21 6,18 5,15 4,53 4,12 /m /m /m /m /m /m boat construction, model making, tank and mould construction, v ehicle parts. Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 40% volume fibres: resin c onsumption: 440g/m, laminate thic kness: 0,63mm, l aminate weight: 1100g/m
24
www.hp-textiles.com
E-Mail: info@hp-textiles.com
G L A S S F IL AM ENT F A BRI C S W IT H F I NI S H S I Z I NG
Finish sizing: In this manufacturing process, the fabric is made from a textile glass fibre. After that the fabric gets an imersion bath to attach the finish sizing which is a special bonding agent. The finish consists of a bifunctional, chemical compound which is on the one hand a binding to the resin and on the other hand an optimization to the fibre. Finished fabrics have been treated with modified silane sizes. They feel slightly tacky, become quickly impregnated with resin, are very soft and smooth, and scarcely fray when cut.
Article: HP-P25EF
Price(/m): from 1m * from 5m from 10m from 25m from 50m from 100m
Glass Fabric
net
Weight: 25g/m
Sizing: Finish
Weave: Plain
Fields of application: 2,70 2,52 2,34 1,98 1,53 1,31 /m /m /m /m /m /m boat construction, model making, tank and mould construction, v ehicle parts, circuit boards, wing coatings, v eneer coatings Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 24g/m, laminate thic kness: 0,04mm, laminate weight: 49g/m
Article: HP-P49EF
Price(/m): from 1m * from 5m from 10m from 25m from 50m from 100m
Glass Fabric
net 2,70 2,52 2,34 1,98 1,53 1,31 /m /m /m /m /m /m
Weight: 48g/m
Sizing: Finish
Weave: Plain
Fields of application: boat construction, model making, tank and mould construction, v ehicle parts, circuit boards, wing coatings, v eneer coatings Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 39g/m, laminate thic kness: 0,05mm, laminate weight: 87g/m
Article: HP-P50EF
Price(/m): from 1m * from 5m from 10m from 25m from 50m from 100m
Glass Fabric
net 4,05 3,78 3,51 3,24 2,84 2,29 /m /m /m /m /m /m
Weight: 48g/m
Sizing: Finish
Weave: Plain
Fields of application: boat construction, model making, tank and mould construction, v ehicle parts, circuit boards, wing coatings, v eneer coatings Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 39g/m, laminate thic kness: 0,05mm, laminate weight: 87g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
25
Article: HP-P78EF
Glass Fabric
net
Weight: 78g/m
Sizing: Finish
Weave: Plain
Width: 127cm
Price(/m): from 1m * from 5m from 10m from 25m from 50m from 110m
Fields of application: 3,57 3,23 2,99 2,76 2,41 1,96 /m /m /m /m /m /m boat construction, model making, sandwich construction, thin coatings, sportsequipment Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 64g/m, laminate thic kness: 0,09mm, laminate weight: 142g/m
Article: HP-T72EF
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 127m Incl.VAT 5,34 4,75 4,43 3,88 3,44 2,84
Glass Fabric
net
Weight: 72g/m
Sizing: Finish
Weave: Twill
Width: 127cm
Fields of application: /m /m /m /m /m /m 4,49 3,99 3,72 3,26 2,89 2,39 /m /m /m /m /m /m boat construction, model making, sandwich construction, thin coatings, sportsequipment Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 64g/m, laminate thic kness: 0,09mm, laminate weight: 142g/m
Article: HP-P80EF
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 110m Incl.VAT 4,82 4,50 4,18 3,86 3,38 2,73 /m /m /m /m /m /m
Glass Fabric
net
Weight: 81g/m
Sizing: Finish
Weave: Plain
Width: 100cm
Fields of application: 4,05 3,78 3,51 3,24 2,84 2,29 /m /m /m /m /m /m sandwich construction, model making, thin coatings, GRP-Panels
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 67g/m, laminate thic kness: 0,09mm, laminate weight: 148g/m
Article: HP-P100EF
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 110m Incl.VAT 4,82 4,50 4,18 3,86 3,38 2,73 /m /m /m /m /m /m
Sizing: Finish
Weave: Plain
Width: 110cm
Fields of application: Sandwich construction, model making, thin coating, GRP-Panels, circuit boards
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 85g/m, laminate thic kness: 0,11mm, laminate weight: 189g/m
26
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Article: HP-T100EF
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 110m Incl.VAT 4,82 4,50 4,18 3,86 3,38 2,73 /m /m /m /m /m /m
Glass Fabric
net
Weight: 104g/m
Sizing: Finish
Weave: Twill
Width: 127cm
Construction:
Fields of application: 4,05 3,78 3,51 3,24 2,84 2,29 /m /m /m /m /m /m sandwich construction, model making, thin coatings, boat constructions
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35 % volume fibres: resin c onsumption: 85g/m, laminate thic kness: 0,11mm, laminate weight: 189g/m
Article: HP-P160EF
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 5,34 4,75 4,43 3,88 3,44 2,84 /m /m /m /m /m /m
Sizing: Finish
Weave: Plain
Width: 100cm
Fields of application: boat construction, model making, v ehicle parts, hull coatings Very smooth, good epoxy impregnation, high transparency! Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 131g/m, laminate thic kness: 0,18mm, l aminate weight: 291g/m
Article: HP-P163EF
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 5,34 4,75 4,43 3,88 3,44 2,84 /m /m /m /m /m /m
Sizing: Finish
Weave: Plain
Width: 100cm
Fields of application: 4,49 3,99 3,72 3,26 2,89 2,39 /m /m /m /m /m /m boat construction, model making, tank and mould construction, v ehicle parts, sportsequipment Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 136g/m, laminate thic kness: 0,18mm, l aminate weight: 302g/m
Article: HP-T163EF
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 5,34 4,75 4,43 3,88 3,44 2,84 /m /m /m /m /m /m
Glass Fabric
net
Weight: 163g/m
Sizing: Finish
Weave: Twill
Width: 100cm
Fields of application: 4,49 3,99 3,72 3,26 2,89 2,39 /m /m /m /m /m /m boat construction, model making, tank and mould construction, v ehicle parts, sportsequipment Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 136g/m, laminate thic kness: 0,18mm, l aminate weight: 302g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
27
Warp: 24 (y ./cm)
Wef t: 23 (y ./cm)
Article: HP-T194EF
Glass Fabric
net
Weight: 194g/m
Sizing: Finish
Weave: Twill
Width: 120cm
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 127m
Fields of application: 4,49 3,99 3,72 3,26 2,89 2,39 /m /m /m /m /m /m boat construction, model making, tank and mould construction, v ehicle parts, sportsequipment Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 160g/m, laminate thic kness: 0,21mm, l aminate weight: 354g/m
Article: HP-P200EF
Price (/m): ab 1m * ab 5m ab 10m ab 25m ab 50m ab 100m Incl.VAT 4,46 4,02 3,84 3,57 3,31 2,73 /m /m /m /m /m /m
Glass Fabric
net
Weight: 206g/m
Sizing: Finish
Weave: Plain
Width:
100/127cm
Fields of application: 3,75 3,38 3,23 3,00 2,78 2,29 /m /m /m /m /m /m boat construction, model making, tank and mould construction, v ehicle parts, sportsequipment Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 169g/m, laminate thic kness: 0,23mm, l aminate weight: 375g/m
Article: HP-U220EF
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 6,20 5,78 5,39 4,69 3,95 3,69 /m /m /m /m /m /m
Sizing: Finish
Weave: Plain
Width: 100cm
Fibre orientation: 204g/m unidirectional Fields of application: design of models-, sport equipment, airfoil coating, rotor blades, sandwich components Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 181g/m, laminate thic kness: 0,24mm, l aminate weight: 401g/m
Article: HP-P280EF
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 6,20 5,76 5,32 4,65 3,95 3,51 /m /m /m /m /m /m
Glass Fabric
net 5,21 4,84 4,47 3,91 3,32 2,95 /m /m /m /m /m /m
Weight: 280g/m
Sizing: Finish
Weave: Plain
Width: 100cm
Fields of application: boat construction, model making, tank and mould construction, v ehicle parts, sportsequipment Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 232g/m, laminate thic kness: 0,31mm, l aminate weight: 514g/m
28
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Article: HP-T280EF
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 6,20 5,76 5,32 4,65 3,95 3,51 /m /m /m /m /m /m
Glass Fabric
net
Weight: 280g/m
Sizing: Finish
Weave: Twill
Width: 100cm
Construction:
Fields of application: 5,21 4,84 4,47 3,91 3,32 2,95 /m /m /m /m /m /m boat construction, model making, tank and mould construction, v ehicle parts, sportsequipment Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 232g/m, laminate thic kness: 0,31mm, l aminate weight: 514g/m
Article: HP-S300EF
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 7,95 7,50 6,96 6,43 5,62 4,56 /m /m /m /m /m /m
Sizing: Finish
Weave: Satin 8
Width: 100cm
Fields of application: boat construction, model making, tank and mould construction, v ehicle parts, sportsequipment Suitable f or epoxy and poly ester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 250g/m, laminate thic kness: 0,33mm, l aminate weight: 550g/m
Article: HP-P390EF
Price (/m): ab 1m * ab 5m ab 10m ab 25m ab 50m ab 100m Incl.VAT 7,50 6,96 6,43 5,62 4,56 4,15 /m /m /m /m /m /m
Sizing: Finish
Weave: Plain
Width: 100cm
Fields of application: 6,30 5,85 5,40 4,72 3,83 3,49 /m /m /m /m /m /m boat construction, model making, tank and mould construction, v ehicle parts, sportsequipment Suitable f or epoxy and poly ester resins
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 320g/m, laminate thic kness: 0,43mm, l aminate weight: 710g/m
Article: HP-T390EF
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 7,50 6,96 6,43 5,62 4,56 4,15 /m /m /m /m /m /m
Sizing: Finish
Weave: Twill
Width: 100cm
Fields of application: 6,30 5,85 5,40 4,72 3,83 3,49 /m /m /m /m /m /m boat construction, model making, tank and mould construction, v ehicle parts, sportsequipment Suitable f or epoxy and poly ester resins
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 320g/m, laminate thic kness: 0,43mm, l aminate weight: 710g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
29
Warp: 7 (y ./cm)
Wef t: 7 (y ./cm)
Article: HP-S440EF
Sizing: Finish
Weave: Satin 8
Width: 100cm
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m
Fields of application: model making, tank and mould construction, motor sports
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 360g/m, laminate thic kness: 0,48mm, l aminate weight: 800g/m
Article: HP-HD1000EF
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 22,50 20,90 19,99 18,45 16,99
Sizing: Finish
Weave: Plain
Width: 100cm
Fields of application: /m 18,91 /m 17,56 /m 16,80 /m 15,50 /m 14,28 On request /m /m /m /m /m model making, tank and mould construction, motor sports
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 820g/m, laminate thic kness: 1,10mm, l aminate weight: 1800g/m
30
www.hp-textiles.com
E-Mail: info@hp-textiles.com
G L A S S R OV I N G F A B R I C
You can make thick mouldings with less layers. The fibre content and the strength of these laminates is higher compared to the Glass-Fibre-Mats but lower than the Glass-Filament-Fabrics or multiaxial fabrics.
Sizing: Silane
Weave: Plain
Width: 130cm
Fields of application: boat construction, tank and mould construction, v ehicle parts.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 247g/m, laminate thic kness: 0,33mm, l aminate weight: 547g/m
Weight: 400g/m
Sizing: Silane
Weave: Plain
Width: 130cm
Fields of application: boat construction, tank and mould construction, v ehicle parts.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 247g/m, laminate thic kness: 0,33mm, l aminate weight: 547g/m
Sizing: Silane
Weave: Twill
Width: 130cm
Fields of application: boat construction, tank and mould construction, v ehicle parts.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 247g/m, laminate thic kness: 0,33mm, l aminate weight: 547g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
31
The Glass-Roving-Fabric consists of one or a certain number of glass strands aligned almost parallel, twist free and bundled to form. The diameter of a single filament is between 13m and 24m.
Weight: 600g/m
Sizing: Silane
Weave: Plain
Width: 130cm
Price (/m): from 1m * from 5m from 10m from 25m from 65m from 130m
net 3,09 2,98 2,89 2,78 2,37 2,06 /m /m /m /m /m /m Fields of application: boat construction, tank and mould construction, v ehicle parts.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 493g/m, laminate thic kness: 0,66mm, l aminate weight: 1093g/m
Weight: 800g/m
Sizing: Silane
Weave: Plain
Width: 130cm
Fields of application: 3,64 3,12 2,81 2,50 2,08 1,87 /m /m /m /m /m /m boat construction, tank and mould construction, v ehicle parts.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 658g/m, laminate thic kness: 0,88mm, l aminate weight: 1458m
C O M B O - M A T ( W OV EN R O V I N G W I T H C H O P P E D G L A S S M A T )
The Combo-Mat is made of a Glass-Roving-Fabric and a Glass-Fibre-Mat which are stitched together. The Glass-Fibre-Mat is made of chopped glass. The combination of the Roving-Fabric and the Fibre-Mat combines the advantages of the individual components and saves one working process. Combo-Mat is basically used in pultrusion, RTM, filament winding and hand lay-up processes. Typical products include pultruded parts, pipe, storage tanks, wind generator blades and other FRP products.
Article: HP-PC900/130E
Woven Roving + Chopped Glass Price (/m): from 1m * from 5m from 10m from 25m from 65m from 130m Incl.VAT 6,94 5,95 5,36 4,76 3,96 3,57 /m /m /m /m /m /m net 5,83 5,00 4,50 4,00 3,33 3,00 /m /m /m /m /m /m
Weight: 900g/m
Sizing: Silane
Weave: needled
Width: 130cm
Fields of application: boat construction, tank and mould construction, v ehicle parts, flag poles, cross members Suitable f or epoxy and poly ester resin
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 1195g/m, laminate thic kness: 1,38mm, laminate weight: 2095m
32
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Article: HP-PC1050AD Woven roving + chopped glass Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl.VAT 10,59 /m 9,22 /m 7,72 /m 6,65 /m 5,53 /m 4,99 /m net 8,90 7,75 6,49 5,59 4,65 4,19 /m /m /m /m /m /m
Weight:
Sizing:
Weave: needled
Width: 125cm
1050g/m Silane
Area of application: Sewer pipes, boat building, car parts, mould- and tank building
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 1400g/m, laminate thic kness: 1,62mm, laminate weight: 2450m
Article: HP-PC1050E
Woven Roving + Chopped Glass Price (/m): from 1m * from 5m from 10m from 25m from 65m from 130m Incl.VAT 8,09 6,94 6,24 5,55 4,63 4,17 /m /m /m /m /m /m net
Weight:
Sizing:
Weave: needled
Width: 130cm
1050g/m Silane
Fields of application: 6,80 5,83 5,24 4,66 3,89 3,50 /m /m /m /m /m /m boat construction, tank and mould construction, v ehicle parts, flag poles
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 1400g/m, laminate thic kness: 1,62mm, laminate weight: 2450m
Article: HP-BC1050E
Woven Roving + Chopped Glass Price (/m): from 1m from 5m from 10m 1 Roll / 31,75m 2 Rolls / 63,5m Incl.VAT 8,13 /m 6,96 /m 5,81 /m 5,11 /m 4,18 /m net 6,83 /m 5,85 /m 4,88 /m 4,29 /m 3,51 /m
Weight:
Sizing:
Weave: needled
Width: 127cm
1050g/m Silane
Fields of application: boat construction, tank and mould construction, v ehicle parts, flag poles
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 863g/m, laminate thic kness: 1,15mm, l aminate weight: 1913m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
33
Combination Mats
The mat consists of chopped and un-oriented E-Glass spinning threads which are coated with a silane sizing. The connection of the spinning threads among each other takes place by a powdery, in styrene readily soluble and polyester based mat-binder. The processing takes place by the usual contact process. The mat is suitable for epoxy, polyester and vinylester resins. Quality features: - good wet-out and easy to form - good resistance to water and chemical agents - suitable for filament winding or continuous laminating Article: HP-MPS150E
Chopped Strand Mat Price (/m): from 1m * from 5m from 10m from 20m from 50m 1 Roll (25kg) Incl.VAT 1,67 1,37 1,18 1,00 0,82 /m /m /m /m /m net 1,40 1,15 0,99 0,84 0,69 /m /m /m /m /m Weight: 150g/m Sizing: Silane Yarn type: E-Glass Width: 125cm Strand linier density: 15tex
Fields of application: boat construction, tank and mould construction, v ehicle parts, garden ponds and swimming pools. Suitable f or epoxy - poly ester and viny lester resins
4,45 /kg
3,74 /kg
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 15% volume fibres: resin c onsumption: 376g/m, laminate thic kness: 0,38mm, l aminate weight: 526g/m
Article: HP-MP225E
Chopped Strand Mat Price (/m): from 1m * from 5m from 10m from 20m from 50m 1 Roll (35kg) Incl.VAT 1,83 1,51 1,25 1,05 0,94 /m /m /m /m /m net 1,54 1,27 1,05 0,88 0,79 /m /m /m /m /m
Weight: 225g/m
Sizing: Silane
Width: 125cm
Fields of application: boat construction, tank and mould construction, v ehicle parts, garden ponds and swimming pools. Suitable f or epoxy - poly ester and viny lester resins.
3,25 /kg
2,73 /kg
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 15% volume fibres: resin c onsumption: 560g/m, laminate thic kness: 0,58mm, l aminate weight: 789g/m
Article: HP-MP300E
Chopped Strand Mat Price (/m): from 1m * from 5m from 10m from 20m from 50m 1 Roll (25kg) Incl.VAT 2,31 1,92 1,58 1,32 1,18 /m /m /m /m /m net 1,94 1,61 1,33 1,11 0,99 /m /m /m /m /m
Weight: 300g/m
Sizing: Silane
Width: 125cm
Fields of application: boat construction, tank and mould construction, v ehicle parts, garden ponds and swimming pools. Suitable f or epoxy - poly ester and viny lester resins.
3,00 /kg
2,52 /kg
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 15% volume fibres: resin c onsumption: 750g/m, laminate thic kness: 0,77mm, l aminate weight: 1050g/m
34
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Article: HP-MP450E
Chopped Strand Mat Price (/m): from 1m * from 5m from 10m from 20m 1 Roll (25kg) Incl.VAT 3,38 2,80 2,31 1,93 /m /m /m /m net 2,84 2,35 1,94 1,62 /m /m /m /m
Weight: 450g/m
Sizing: Silane
Width: 125cm
Fields of application: Boat construction, tank and mould construction, v ehicle parts, garden ponds and swimming pools. Suitable f or epoxy - poly ester and viny lester resins.
3,00 /kg
2,52 /kg
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 15% volume fibres: resin c onsumption: 1127g/m, laminate thic kness: 1,15mm, laminate weight: 1577g/m
Article: HP-MP600E
Chopped Strand Mat Price (/m): from 1m * from 5m from 10m from 20m 1 Roll (25kg) Inlc.VAT 4,50 3,72 3,08 2,57 /m /m /m /m net 3,78 3,13 2,59 2,16 /m /m /m /m
Weight: 600g/m
Sizing: Silane
Width: 125cm
Fields of application: Boat construction, tank and mould construction, v ehicle parts, garden ponds and swimming pools. Suitable f or epoxy - poly ester and viny lester resins.
3,00 /kg
2,52 /kg
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 15% volume fibres: resin c onsumption: 1500g/m, laminate thic kness: 1,54mm, laminate weight: 2100g/m
EC R- G L A S S M AT
ECR-Glass fibre reinforcements combine the eletrical and mechanical properties of E-glass fibre with superior chemical corrosion resistance, superior thermal resistance, higher dielectric strenght and better surface resistivity. ECR-Glass (E-Glass Corrosion Resistant) has an extremely high corrosion resistance. ECR-Glass chopped strand mat is made from fibreglass strands of a certain length and they are bonded together with a powder binder.
Article: HP-MP450C
ECR-Glass Mat Price (/m): from 1m * from 5m from 10m from 20m from 50m 1 Rol (30/45kg) Incl.VAT 4,58 3,67 3,20 2,75 2,28 /m /m /m /m /m net 3,85 3,08 2,69 2,31 1,92 /m /m /m /m /m
Weight: 450g/m
Sizing: Silane
Width: 104/127cm
Fields of application: Sewer renov ation, boat construction, v ehicle parts, garden ponds and swimming pools. High resistance to weathering and chemicals Suitable f or epoxy - poly ester and viny lester resins.
3,99 /kg
3,35 /kg
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll. Calculated data for hand l ami nate with 15% volume fibres: resin c onsumption: 1127g/m, laminate thic kness: 1,15mm, laminate weight: 1577g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
35
33tex
C - GL A S S N O N - W OV EN
C-Glass Non-Woven
The non-woven C-Glass-Fabric has a styren soluble binder. It owns an optimised chemical resistance and has a thread equipment on a silane basis. The binder disperses quickly in the resin, therefore it is possible to handle complex geometries and curves. The C-Glass fabrics can be applied in different processe s (e.g. by using low pressure) in order to achieve vissually and chemically improved surfaces.
Article: HP-VJ30C
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m
C-Glass Fabric
net 1,80 1,44 1,08 0,97 0,94 0,90 /m /m /m /m /m /m
Weight: 30g/m
Width: 100cm
Fields of application: Tubes and tank for chemicals, industrial pressing parts, pond and pool coatings, model making. Suitable f or epoxy - poly ester and viny lester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll.
Article: HP-VJ50C
Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m
C-Glass Fabric
net 1,80 1,44 1,08 0,97 0,94 0,90 /m /m /m /m /m /m
Weight: 50g/m
Width: 100cm
Fields of application: Tubes and tank for chemicals, industrial pressing parts, pond and pool coatings, model making. Suitable f or epoxy - poly ester and viny lester resins.
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll.
36
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Article: HP-VP151P
Weight:
Material: Polyester
Weave: needled
Width: 130cm
Polyester Mould-Making Fleece 150g/m Price (/m): from 1m * from 5m from 10m from 25m from 50m from 130m Incl.VAT 3,75 2,68 2,14 1,61 1,34 1,13 /m /m /m /m /m /m net 3,15 2,25 1,80 1,35 1,13 0,95 /m /m /m /m /m /m
Fields of application: car boot expansion, car-hi-fi extensions and door boards, roof liners **Ideal for the productions of free-form shapes**
*Up to 2,5m the article will be deli ver ed folded. From 3m on a roll.
Mould-Making Fabric - Combo-Mat Due to the special needling of roving and chopped glass fibres this combination is especially voluminous, cuddly and therefore suitable for applications in moulds. Already with one layer you achieve a laminate thickness of approx. 4 5 mm. The resin consumption is at approx. 2 kg/m depending on surface and application .
Article: HP-PC600E
Mould-Making Fabric Price (/m): from 1m * from 5m from 10m from 25m from 50m from 150m Incl.VAT 7,50 6,19 5,59 4,75 4,27 3,80 /m /m /m /m /m /m net 6,30 5,20 4,70 3,99 3,59 3,19
Weight: 600g/m
Weave: needled
Width: 120cm
Fields of application: tank and mould construction, Car boot expansion, car-hi-fi extensions and door boards, **Ideal for the productions of free-form shapes**
/m /m /m /m /m /m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
37
Mould-Making Fabrics
M U L T I A X I A L E- GL A S S F A B R I C S
Glass-fibres are low-priced and therefore the most common used reinforcement fibres. They are incombustible and temperature resistant up to 400C and they are also resistant to chemicals and weathering. Multiaxiale-Glass-Fabrics are non-woven textile areas whose fibres are endless and lay parallel next to each other. They are fixed together with a sewing thread or with thermosetting. Whether aerospace, boat construction or motor sports, many areas increase their competitiveness through the use of Multiaxiale-GlassFabrics.
Bidiagonal: - The f ibres lie crossed on top of each other in 2 different directions - Orientation can be: 0 /90, +/-45
+45
0 90
- 45 + 45 Triaxial: - The f ibres lie crossed on top of each other in 3 different directions - Orientation can be e.g. 0/+45/-45 - 45 + 45 Quadraxial: - The f ibres lie crossed on top of each other in 4 different directions - Orientation can be e.g. 0/+45/-45/90 90 - 45 Advantages of multiaxial fabrics comparing with the traditional fabrics: High drapability depending on weight and sewing Better mechanical properties Easy handling, the f abric remains stable even when cutting Good wet out and lower resin consumption Load oriented f ibre orientation High-quality surf aces through lower f ibre impression 0 0 + 45 90 - 45
Article: HP-U400E
Unidirectional Glass Fabric Price(/m): from 1m from 5m from 10m from 25m 1 Roll/ 63,5m Incl. VAT 3,83 3,36 2,59 2,11 /m /m /m /m net 3,22 2,82 2,18 1,77 /m /m /m /m
Weight: 440g/m
Width: 127cm
Construction: 0
Fields of application: boat construction, tank and mould construction, v ehicle parts, model making, ski and snowboards, rotor blades, sportsequipment Suitable f or epoxy and poly ester resins
1,73 /m
1,45 /m
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 328g/m, laminate thic kness: 0,44mm, l aminate weight: 728g/m
38
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Article: HP-U600E
Unidirectional Glass Fabric Price (/m): from 1m from 5m from 10m from 25m 1 Roll / 50,8m Incl.VAT 4,85 4,17 3,51 3,05 /m /m /m /m net
Weight: 650g/m
Width: 127cm
Construction: 0
Fields of application: 4,08 3,50 2,95 2,56 /m /m /m /m boat construction, tank and mould construction, v ehicle parts, model making and rotor blades, sportsequipment Suitable f or epoxy and poly ester resins.
2,50 /m
2,10 /m
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 492g/m, laminate thic kness: 0,66mm, l aminate weight: 1092g/m
Article: HP-B320E
Bidiagonal Glass Fabric Price (/m): from 1m from 5m from 10m from 25m 1 Roll / 63,5m Incl.VAT 3,77 3,36 2,93 2,51 /m /m /m /m net
Weight: 320g/m
Width: 127cm
Fields of application: 3,17 2,82 2,46 2,11 /m /m /m /m boat construction, tank and mould construction, v ehicle parts, model making, sportsequipment, garden ponds and swimming pools Suitable f or epoxy and poly ester resins.
2,09 /m
1,76 /m
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 263g/m, laminate thic kness: 0,35mm, l aminate weight: 583g/m
Article: HP-B320/635E
Bidiagonal Glass Fabric Price (/m): from 1m from 5m from 10m from 25m 1 Roll / 63,5m Incl.VAT 3,77 3,36 2,93 2,51 /m /m /m /m net
Weight: 320g/m
Width: 63cm
Fields of application: 3,17 2,82 2,46 2,11 /m /m /m /m boat construction, tank and mould construction, v ehicle parts, model making, sportsequipment, garden ponds and swimming pools Suitable f or epoxy and poly ester resins.
2,09 /m
1,76 /m
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 263g/m, laminate thic kness: 0,35mm, l aminate weight: 583g/m
Article: HP-B450E
Bidiagonal Glass Fabric Price (/m): from 1m from 5m from 10m from 25m 1 Roll / 63,5m Incl.VAT 4,69 4,11 3,52 2,93 /m /m /m /m net
Weight: 450g/m
Width: 127cm
Fields of application: 3,94 3,45 2,96 2,46 /m /m /m /m boat construction, tank and mould construction, v ehicle parts, model making, sportsequipment, garden ponds and swimming pools, rotor blades Suitable f or epoxy and poly ester resins.
2,58 /m
2,17 /m
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 370g/m, laminate thic kness: 0,49mm, l aminate weight: 820g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
39
Article: HP-B450/635E
Bidiagonal Glass Fabric Price (/m): from 1m from 5m from 10m 1 Roll / 31,5m 2 Rolls / 63m Incl.VAT 4,69 /m 4,11 /m 3,52 /m 2,93 /m 2,58 /m net 3,94 /m 3,45 /m 2,96 /m 2,46 /m 2,17 /m
Weight: 450g/m
Width: 63cm
Fields of application: boat construction, tank and mould construction, v ehicle parts, model making, ski and snowboards, rotor blades, garden ponds and swimming pools Suitable f or epoxy and poly ester resins.
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 370g/m, laminate thic kness: 0,49mm, l aminate weight: 820g/m
Article: HP-B600E
Bidiagonal Glass Fabric Price (/m): from 1m from 5m from 10m from 25m 1 Roll / 50,8m Incl.VAT 5,47 4,69 4,22 3,75 /m /m /m /m net 4,60 3,94 3,55 3,15 /m /m /m /m
Weight: 600g/m
Width: 127cm
Fields of application: boat construction, tank and mould construction, v ehicle parts, model making, rotor blades Suitable f or epoxy and poly ester resins.
3,13 /m
2,63 /m
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 493g/m, laminate thic kness: 0,66mm, l aminate weight: 1093g/m
Article: HP-B810E
Bidiagonal Glass Fabric Price (/m): from 1m from 5m from 10m 1 Roll / 31,75m 2 Rolls / 63,5m Incl.VAT 7,39 /m 6,33 /m 5,27 /m 4,64 /m 3,80 /m net 6,21 /m 5,32 /m 4,43 /m 3,90 /m
Weight: 810g/m
Width: 127cm
Fields of application: boat construction, tank and mould construction, v ehicle parts, model making, rotor blades Suitable f or epoxy and poly ester resins.
3,19 /m
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 668g/m, laminate thic kness: 0,89mm, l aminate weight: 1475g/m
40
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Article: HP-BC1050E
Bidiagonal Glass Fabric Complex Price (/m): from 1m from 5m from 10m 1 Roll / 31,75m 2 Rolls / 63,5m Incl.VAT 8,13 /m 6,96 /m 5,81 /m 5,11 /m 4,18 /m net
Weight: 1050g/m
Width: 127cm
Construction: 0 / 90 + Mat
Fields of application: 6,83 /m 5,85 /m 4,88 /m 4,29 /m 3,51 /m Boat construction, tank and mould construction, v ehicle parts, model making, sportsequipment Suitable f or epoxy and poly ester resins.
Chopped glass
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 863g/m, laminate thic kness: 1,15mm, laminate weight: 1910g/m
Article: HP-T750E
Triaxial Glass Fabric Price (/m): from 1m from 5m from 10m 1 Roll / 38,1m 2 Rolls / 76,2m Incl.VAT 6,90 /m 5,91 /m 4,93 /m 4,34 /m 3,55 /m net 5,80 /m 4,97 /m 4,14 /m 3,65 /m
Weight: 750g/m
Width: 127cm
Fields of application: Boat construction, tank and mould construction, v ehicle parts, model making, snowboards and kickboards, sportsequipSuitable f or epoxy and poly ester resins.
+45
2,98 /m
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 616g/m, laminate thic kness: 0,82mm, l aminate weight: 1365g/m
Article: HP-T1150E
Triaxial Glass Fabric Price (/m): from 1m from 5m from 10m 1 Roll / 31,75m 2 Rolls / 63,5m Incl.VAT 10,59 /m 9,07 /m 7,56 /m 6,65 /m 5,44 /m net 8,90 /m 7,62 /m 6,35 /m 5,59 /m 4,57 /m
Weight: 1150g/m
Width: 127cm
Fields of application: Boat construction, tank and mould construction, v ehicle parts, model making, rotor blades, sportsequipment
+45
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 945g/m, laminate thic kness: 1,26mm, l aminate weight: 2095g/m
Article: HP-Q850E
Quadraxial Glass Fabric Price (/m): from 1m from 5m from 10m 1 Roll / 38,1m 2 Rolls / 76,2m Incl.VAT 7,82 /m 6,71 /m 5,59 /m 4,91 /m 4,02 /m net
Weight: 850g/m
Width: 127cm
Fields of application: 6,57 /m 5,64 /m 4,70 /m 4,13 /m Suitable f or epoxy and poly ester resins. 3,38 /m Boat construction, tank and mould construction, v ehicle parts, model making,
90 +45
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 698g/m, laminate thic kness: 0,93mm, l aminate weight: 1550g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
41
C A RBO N F A B RI C T A P ES ( T HERM O S ET )
Due to the special manner of preparation the unidirectional Carbon-Fabric-Tapes are very hard-wearing and easy to handle. Shiftings are almost impossible because of the thermosetting. Carbon fibres have a high tensile strength, a low specific weight, low breaking elongation and a high temperature resistance. They have a higher strength than the most metals and other fibre composites. The elongation of CRP is elastic, the fatigue resistance and vibration damping is excellent.
Fields of application: Sport equipment, tanks, pipes, hulls, model making, boat construction, repairs & reinforcements,
Weight: 315g/m
Construction 0
Length: 50 m.
Article: HP-U315C/025
Width: 2,5cm Price (/roll): from 1 roll / Length: 50m. Incl.VAT 52,00
1,04
Article: HP-U315C/040
Width: 4cm Price (/roll): from 1 roll / Length: 50m. Incl.VAT 82,50
1,65
net 43,50
0,87
net 69,50
1,39
Basic price/m
47,00
0,94
39,50
0,79
from 2 rolls
Basic price/m Basic price/m
75,00
1,50
63,00
1,26
42,00
0,84
35,50
0,71
68,00
1,36
57,00
1,14
37,50
0,75
31,50
0,63
59,50
1,19
50,00
1,00
Article: HP-U315C/050
Width: 5cm Price (/roll): from 1 roll / Length: 50m. Incl.VAT 94,00
1,88
Article: HP-U315C/100
Width: 10cm net 79,00
1,58
net 142,00
2,84
Basic price/m
from 2 rolls
Basic price/m Basic price/m
84,50
1,69
71,00
1,42
160,00
3,20
134,50
2,69
75,00
1,50
63,00
1,26
141,00
2,82
118,50
2,37
68,50
1,37
57,50
1,15
127,00
2,54
106,50
2,13
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 378g/m, laminate thic kness: 0,51mm, l aminate weight: 693g/m
42
www.hp-textiles.com
E-Mail: info@hp-textiles.com
C A RBO N S T A NDA R D T A P ES
Our Fabric-Tapes are manuf actured on high-performance ribbon looms up to a width of 100mm. Other weights, constructions or other widths are available by request.
Fields of application: sportsequipment, tanks, pipes, hulls, model making, boat construction, repairs & reinforcements. Suitable for epoxy resin
Weight: 340g/m
Construction: 0
Length: 25 m.
Article: HP-U340C/025 Width: 2,5cm Price (/roll): from 1 roll / Length: 25m. Incl.VAT 33,25
1,33
Article: HP-U340C/040 Width: 4cm Price (/Roll): from 1 roll / Length: 25lfm. Incl.VAT 53,25
2,13
net 28,00
1,12
net 44,75
1,79
Basic price/m
29,25
1,17
24,50
0,98
from 2 rolls
Basic price/m Basic price/m
46,75
1,87
39,50
1,58
26,75
1,07
22,50
0,90
42,50
1,70
35,75
1,43
24,00
0,96
20,25
0,81
38,25
1,53
32,25
1,29
Article: HP-U340C/050 Width: 5cm Price (/roll): from 1 roll / Length: 25m. Incl.VAT 66,50
2,66
net 112,00
4,48
58,50
2,34
49,25
1,97
117,25
4,69
98,50
3,94
53,25
2,13
44,75
1,79
106,50
4,26
89,50
3,58
48,00
1,92
40,25
1,61
95,75
3,83
80,50
3,22
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 408g/m, laminate thic kness: 0,55mm, l aminate weight: 748g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
43
Fields of application: sportsequipment, tanks, pipes, hulls, model making, boat building, reinf orcements & repairs. Suitable f or epoxy and poly ester resins.
Weight: 140g/m
Weave: Plain
Length: 100 m
Article: HP-P140/025E Width: 2,5cm Price (/roll): from 1 roll / Length: 100m net 7,28
0,073
Article: HP-P140/050E Width: 5cm Price (/roll): from 1 roll / Length: 100m Incl.VAT 17,32
0,17
Incl.VAT 8,66
0,087
net 14,55
0,15
Basic price / m
Basic price / m
from 5 rolls
Basic price / m
7,13
0,071
5,99
0,060
from 5 rolls
14,32
0,14
12,03
0,12
Basic price / m
from 10 rolls
Basic price / m
6,35
0,063
5,34
0,053
from 10 rolls
Basic price / m
12,70
0,13
10,67
0,11
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 115g/m, laminate thic kness: 0,15mm, l aminate weight: 255g/m
Weight: 220g/m
Weave: Plain
Length: 100/130 m
Artikel: HP-P220/020E Breite: 2cm Price (/roll): from 1 roll / Lnge: 100lfm. Incl.VAT 7,58
0,076
Artikel: HP-P220/030E Breite: 3cm Price (/roll): from 1 roll / Lnge: 100lfm. Incl.VAT 11,25
0,11
Article: HP-P220/050E
Width: 5cm Price (/roll): from 1 roll / Length: 100m Incl.VAT 18,96
0,19
net 6,37
0,064
net 9,45
0,095
net 15,93
0,16
Basic price / m
Basic price / m
Basic price / m
from 5 rolls
6,46
0,065
5,43
0,054
Basic price / m
from 5 rolls
9,69
0,097
8,14
0,081
Basic price / m
from 5 rolls
Basic price / m
16,15
0,16
13,57
0,14
from 10 rolls
Basic price / m
5,62
0,056
4,72
0,047
from 10 rolls
Basic price / m
8,43
0,084
7,08
0,071
from 10 rolls
Basic price / m
14,04
0,14
11,80
0,12
Article: HP-P220/080E
Width: 8cm Price (/roll): from 1 roll
Basic price / m
Article: HP-P220/100E
Width: 10cm Price (/roll): from 1 roll
Basic price / m
Article: HP-P220/200E
Width: 20cm Price (/roll): from 1 roll
Basic price / m
net 25,49
0,26
Incl.VAT 43,91
0,34
Incl.VAT 81,99
0,63
from 5 rolls
25,85
0,26
21,72
0,22
Basic price / m
from 5 rolls
40,10
0,31
33,70
0,26
Basic price / m
from 5 rolls
79,61
0,61
66,90
0,52
Basic price / m
from 10 rolls
Basic price / m
22,47
0,23
18,88
0,19
from 10 rolls
Basic price / m
37,49
0,29
31,50
0,24
from 10 rolls
Basic price / m
76,76
0,59
64,50
0,50
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 184g/m, laminate thic kness: 0,25mm, l aminate weight: 408g/m
44
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Weight: 280g/m
Weave: Twill
Length: 100 m
Article: HP-T280/050E
Width: 5cm Price (/roll): from 1 roll / Length: 100m Incl.VAT 22,17
0,22
net 18,63
0,19
Basic price / m
from 5 rolls
20,49
0,21
17,22
0,18
Basic price / m
from 10 rolls
Basic price / m
16,39
0,16
13,77
0,13
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 232g/m, laminate thic kness: 0,31mm, l aminate weight: 514g/m
GL A SS FA BRI C T A PE
This Fabric-Tape is especially smooth and it can be well applied around corners, curves and edges. It is suitable for applications in the boat and tank construction, model making, sportsequipment, pond and swimming pool construction.
+45
- 45
Construction: The Fibres lie crossed on top of each other in +45C and -45C. They are fixed by a sewing thread.
Article: HP-B420E
Glass fabric tape Price (/roll): 20m Incl.Vat 9,75
0,49
Fields of application: sportsequipment, tanks, pipes, hulls, model making, boat building, reinf orcements & repairs. Suitable f or epoxy and poly ester resins.
50m
17,45
0,35
14,66
0,29
Basic price / m
100m
29,90
0,30
25,13
0,25
Calculated data for hand l ami nate with 35% volume fibres: resin c onsumption: 345g/m, laminate thic kness: 0,46mm, l aminate weight: 765g/m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
45
Vacuum Accessories
Prov ides increased thickness with low weight. With one layer you achiev e a thickness of 5mm in the laminate. Shear strength The f abric will not be damaged when applied with a conv entional laminating roller. Rigidity When used as a core, helps build up thicker laminates with a v ery high rigidity Lower production costs Less down-time required, as fewer of resin and fibreglass mat are required. An av erage of 20% less resin consumption in a laminate may be achieved. VOC emissions are also reduced. Overall, the costs sav ings f or the FRP industry can be quite segnificant.
Fields of application pond and swimming pool boat construction tank and mould construction vehicle parts ski and Snowboards a.s.o.
Technical Data: width Role length Thickness dry Thickness wet Weight dry Resin consumption cm m mm mm g/m Kg/m
HP-CORE-3 100 50 2,7 - 3,6 3,3 - 3,9 125 - 155 1,7 - 1,9
HP-CORE-4 100 40 3,5 - 4,6 3,8 - 4,9 160 - 185 2,3 - 2,5
HP-CORE-5 100 30 4,8 - 5,4 5,0 - 5,6 230 - 270 2,9 - 3,1
46
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Article: HP-CORE-2 Thickness: 2mm Price (/m): ab 1m ab 5m ab 10m ab 25m ab 50m ab 80m Incl. VAT 8,21 6,96 6,41 5,36 4,64 4,39 /m /m /m /m /m /m net 6,90 5,85 5,39 4,50 3,90 3,69 /m /m /m /m /m /m
Article: HP-CORE-3 Thickness: 3mm Price (/m): ab 1m ab 5m ab 10m ab 25m ab 50m Incl. VAT 10,12 /m 8,69 /m 7,74 /m 6,78 /m 5,59 /m net 8,50 7,30 6,50 5,70 4,70 /m /m /m /m /m
Article: HP-CORE-4 Thickness: 4mm Price (/m): ab 1m ab 5m ab 10m ab 25m ab 40m Incl. VAT 11,78 /m 10,12 /m 8,93 /m 7,74 /m 6,43 /m net 9,90 8,50 7,50 6,50 5,40 /m /m /m /m /m
Article: HP-CORE-5 Thickness: 5mm Price (/m): ab 1m ab 5m ab 10m ab 30m Incl. VAT 13,92 /m 11,78 /m 10,12 /m 9,04 /m net 11,70 /m 9,90 /m 8,50 /m 7,60 /m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
47
Vacuum Accessories
Advantages of the Vacuum-Infusion-Process: - high f ibre v olumen fraction and therefore achiev ing optimal component properties - minimizing of gas and air pockets because of the closed impregnation - manuf acturing of complex and three-dimensional components is possible - integration of inserts and foam cores is possible - high degree of automation is possible (e.g. rotor blades)
Vacuum Accessories
Vacuum-Infusion Contruction: 9 2 3 4 5 6 7 8 10 11 12 1 3 13
www.hpwww.hp-textiles.com Description 1 2 3 4 Sealant tape Vacuum pump Vacuum tube MTI Hose alternatively: 5 6 7 8 9 Vacuum bagging film Infusion mesh Perforated release film Absorber Connection Peel ply / tear off Component / Laminate Release agent liquid, up to 150C (temporary up to 200C) HP-HGR5 priming wax and PVA, up to 100C carnauba-wax, up to 80C release agent f or smooth, non-porous surfaces up to 80C 13 Mould Tel.: +49 (0) 5905-9459870 www.hp-textiles.com E-Mail: info@hp-textiles.com HP-BM17 HP-G and HP-PVA HP-CX7 Material Buty l rubber Vane Vacuum Pump PE (reasonably priced), 10 or12mm PUR (extra f lexible), 10 or 12mm MTI - Hose Article HP-ST12X3 HP-VZ1200 HP-VZ1010, or HP-VZ1020 HP-VZ1030, or HP-VZ1040 HP-MTI-08 HP-ST060, HP-ST080 or HP-ST100 HP-VF60/260 HP-VFT75/150 HP-IM145/100 HP-RF25/110 HP-VP150P HP-VP80P HP-P83P or HP-T105P
PE-Spiral Tube PA/PE/PA, width 2,60m PA/PE/PA (tube), width 1,50m PE 145g/m, width 100cm HDPE, 30g/m Poly ester non-wov en, white, 150g/m Poly ester non-wov en, black, 80g/m div erse Ty pes Ny lon, Twill / Plain, diverse roll widths
10 11 12 -
48
Vacuum Bagging Film Our Vacuum Bagging Film has good mechanical properties: It has a high tensile strength, good temperature resistance, it is f lexible and it has a low permeability. The Vacuum Bagging Film is the last material in the lay er-construction. It get fixed on the mould by our Sealant-Tape.
Article: HP-VF60/260 Weight: 60g/m Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m from 260m Incl. VAT 3,95 2,75 1,95 1,49 1,13 0,98 0,77 /m /m /m /m /m /m /m net 3,32 2,31 1,64 1,25 0,95 0,82 0,65 /m /m /m /m /m /m /m
Tachnical Data: Material: Elongation at break: Weight: Width: Thickness: Max. temperature: Melting point: Colour: PA/PE/PA > 300% approx. 60g/m 260cm (f olded to 130cm) approx. 60m
Vacuum Bagging Tube Our Vacuum Bagging Tube is reasonable priced and has good mechanical properties: It has a high tensile strength, good temperature resistance, it is f lexible and it has a lowpermeability. Suitable f or epoxyd and poly ester resin. Moulded components could be shoved into the tube. The ends get f ixed with our Sealant-Tape (HP-ST12X80). Article: HP-VFT75/150 Weight: 75g/m Price (/m): from 5m from 10m from 25m from 50m from 100m from 300m from 675m Incl. VAT 2,75 2,07 1,61 1,25 1,09 0,89 0,79 /m /m /m /m /m /m /m net 2,31 1,74 1,35 1,05 0,92 0,75 0,66 /m /m /m /m /m /m /m Technical Data: Material: Elongation at break: Weight: Width: Thickness: Max. Temperature: Melting Point: Colour: PA/PE/PA > 300% approx. 75g/m 150cm (Scope 300cm) approx. 75m approx. 180 C approx. 220C Green, transparent Delivery information: 1m = 3m
Width (total): 260cm (folded up to approx. 130cm) Material: PE/PA/PE coextruded Tickness: 60m HP-Textiles Otto-Hahn-Strasse 22
D-48480 Schapen
49
Vacuum Accessories
approx. 125 C
Peel Ply / Tear-Off Fabric The Peel Ply has been well-known in aircraft construction for many y ears. It is made of Ny lon and is added into epoxy or poly ester resin as the first and/or last lay er of the construction. After hardening, just before further processing it has to be peeled of slowly and in a sharp angle. The Peel Ply leaves an evenly rough, lubricant film f ree and adhesiv e surface behind. Sanding or cleaning of the surf ace is not necessary before sticking or coating. The Peel Ply cant remain in the construction theref ore is a red or blue tracer thread wov en into the f abric.
Peel-Ply Fabrics
Advantage to work with peel ply fabric: - accurate upper surface - a bit rough after tearing off, absolutely clean and free of dust - ideal subsoil for bonding or further laminating / painting - sav es time, no need to grind with sand-paper or removing of grinding dust In some cases it is desired to have a slip resistance of the component (e.g. stand space of surf boards, boat decks). The surf ace is after tearing the Peel Ply off ready for use.
*** Other width or length on request! *** Tel.: +49 (0) 5905-9459870 Mail: info@hp-textiles.com
50
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Weight: 83g/m
Weave: Plain
net 9,45
3,15
net 12,60
3,15
Basic price / m
9,99
3,33
8,39
2,80
from 2 rolls
Basic price / m
13,32
3,33
11,19
2,80
8,76
2,92 2,50
7,36
2,45 2,10
from 3 rolls
Basic price / m
11,68
2,92
9,81
2,45
from 10 rolls
Basic price / m
7,50
6,30
from 7 rolls
Basic price / m
10,00
2,50
8,40
2,10
Width: 5cm
Width: 8cm
net 14,00
2,80
net 22,39
2,80
Basic price / m
from 2 rolls
Basic price / m
14,60
2,92
12,25
2,45
23,32
2,92
19,60
2,45
from 5 rolls
Basic price / m
12,50
2,50
10,50
2,10
20,00
2,50 2,17
16,80
2,10 1,82
from 10 rolls
Basic price / m
10,85
2,17
9,12
1,82
17,36
14,59
Article: HP-P83P10 Width: 10cm / Length: 100m = 10m Price (/Roll): from 1 roll Incl. VAT 29,20
2,92
Article: HP-P83P15 Width: 15cm / Length: 100m = 15m Price (/Roll): from 1 roll Incl. VAT 43,73
2,92
net 24,50
2,45
net 36,75
2,45
Basic price / m
Basic price / m
from 3 rolls
Basic price / m
25,00
2,50
21,00
2,10
from 2 rolls
Basic price / m
37,49
2,50
31,50
2,10
from 5 rolls
Basic price / m
21,70
2,17
18,20
1,82
from 4 rolls
Basic price / m
32,49
2,17
27,30
1,82
from 10 rolls
Basic price / m
19,20
1,92
16,10
1,61
from 7 rolls
Basic price / m
28,74
1,92
24,15
1,61
Article: HP-P83P20 Width: 20cm / Length: 100m = 20m Price (/Roll): from 1 roll Incl. VAT 58,31
2,92
49,98
2,50
42,00
2,10
43,32
2,17 1,92
36,40
1,82 1,61
38,32
32,20
from 1m * from 5m from 10m from 25m from 50m from 120m from 240m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
51
Peel-Ply Fabrics
Article: HP-P83P5
Article: HP-P83P8
Weight: 83g/m
Weave: Plain
Article: HP-P83P100 Width: 100cm Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m from 200m Incl. VAT 3,75 3,33 2,92 2,50 2,17 1,92 1,76 /m /m /m /m /m /m /m net 3,15 2,80 2,45 2,10 1,82 1,61 1,48 /m /m /m /m /m /m /m
Article: HP-P83P150 Width: 150cm Price (/m): from 1m * from 5m from 10m from 25m from 50m from 150m from 300m Incl. VAT 3,75 3,33 2,92 2,50 2,17 1,92 1,76 /m /m /m /m /m /m /m netto 3,15 2,80 2,45 2,10 1,82 1,61 1,48 /m /m /m /m /m /m /m
* Up to 2,5m the article woll be deli verd fol ded. From 3m on a roll.
Peel-Ply Fabrics
The Peel-Ply is very smooth and has a good drapability because of the twill weave
Weight: 105g/m
Weave: Twill
Article: HP-T105P25 Width: 25cm Price (/m): from 5m from 10m from 25m from 50m from 100m from 200m Incl. VAT 3,75 3,33 2,92 2,50 2,17 1,92 /m /m /m /m /m /m net 3,15 2,80 2,45 2,10 1,82 1,61 /m /m /m /m /m /m
Article: HP-T105P100 Width: 100cm Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m from 200m Incl. VAT 4,17 3,75 3,33 2,92 2,50 2,17 1,92 /m /m /m /m /m /m /m net 3,50 3,15 2,80 2,45 2,10 1,82 1,61 /m /m /m /m /m /m /m
Article: HP-T105P125 Width: 125cm Price (/m): from 1m * from 5m from 10m from 25m from 50m from 125m from 250m Incl. VAT 4,17 3,75 3,33 2,92 2,50 2,17 1,92 /m /m /m /m /m /m /m net 3,50 3,15 2,80 2,45 2,10 1,82 1,61 /m /m /m /m /m /m /m
* Up to 2,5m the article woll be deli verd fol ded. From 3m on a roll.
52
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Vacuum Mesh / Infusion Mesh The Inf usion Mesh has to be applied between Vacuum Film and Release Film to ensure the ev en f low of resin throughout the mould surface. It is generally coloured in green for a better visual clarity. After the resin is cured it has to be remov ed f rom the surf ace of the mould area.
Article: HP-IM145/100 Weight: 145g/m Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m Incl. VAT 4,14 3,55 2,96 2,59 2,25 1,77 /m /m /m /m /m /m net 3,48 2,98 2,49 2,18 1,89 1,49 /m /m /m /m /m /m
Technical Data: Material: Konstruktion: Weight: Width: Thickness: Temperature resistance: HDPE (green) Warping Weaving 145g/m (5%) 100cm (5%) approx. 1,15mm 120 C
*Up to 2,5m the article will be deli ver ed folded. From 3m on roll.
Perforated Release Film High-tensible perf orated Release Film. Ideal f or use in a v acuum bag / autoclave processing of composites and v acuum press method. Suitable for the use of polyester, epoxy and phenolic resin sy stems. Basic purpose of the release film is to ensure the proper release of the helping material f rom the component. The Release Film is placed directly on the peel ply in contact with the laminate. It separates the laminate f rom beather / bleeder f abrics, which hav e no release characteristics. Article: HP-RF25/110 Weight: 30g/m Price (/m): from 1m * from 5m from 10m from 25m from 50m from 110m Incl. VAT 3,27 2,08 1,49 1,18 1,01 0,77 /m /m /m /m /m /m net 2,75 1,75 1,25 0,99 0,85 0,65 /m /m /m /m /m /m Technical Data: Material: Enlogation at break: Weight: Width: Thickness: Temperatures resistance: HDPE (white) > 210% approx. 30g/m 110cm approx. 27m 120 C
*Up to 2,5m the article will be deli ver ed folded. From 3m on roll.
double sided adhesive Fibre Glass Type The Fibre-Glass-Tape is used to fix different f abrics or core materials together or to fix them in the mould. Article: HP-AM075/050 Price (/Roll): from 1 roll Incl. VAT 7,90
0,087
net 6,64
0,073
Basic price / m
from 5 rolls
6,90
0,076
5,80
0,063
Basic price / m
from 10 rolls
Basic price / m Basic price / m
5,90
0,065
4,96
0,054
4,90
0,054
4,12
0,045
4,50
0,050
3,78
0,042
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
53
Vacuum Accessories
Sealant-Tape The Tacky Tape is a double-sided adhesive, non-shrinking, workable and sound absorbing v acuum bag sealant tape. It is used to create a seal between the Vacuum Bagging Film ant the mould and to position the Spiral Tubes.
from 5 rolls
9,40
0,63
7,90
0,53
Basic price / m
from 10 rolls
Basic price / m
8,21
0,55
6,90
0,46
from 20 rolls
7,68
0,51
6,45
0,43
Vacuum Accessories
Basic price / m
from 50 rolls
Basic price / m
6,96
0,46
5,85
0,39
aluminium, steel, wood, glass, plastic incl. PE 2x3mm / roll length = 15m / 10 rolls in one box
Polyester Non-Woven Absorber The non-wov en Absorber has a good drapeability. Ideal for the use in connection with components containing complex curvatures or acute radius. It absorbs the excess resin which is pressed through the Perf orated Release Film. It can be used effectiv ely in single or multiplelayres.
Article: HP-VP80P Price (/m): from 1m * from 5m from 10m from 25m from 50m from 100m
Technical Data: Material: Weav e: Poly ester (black) needled 80g/m 80cm approx. 2mm 185 C
*Up to 2,5m the article will be deli ver ed folded. From 3m on roll.
Article: HP-VP150P Price (/m): from 1m * from 5m from 10m from 25m from 50m from 130m
Technical Data: Material: Weav e: Poly ester (white) needled 150g/m 130cm approx. 3-4mm (unpressed) 185 C
*Up to 2,5m the article will be deli ver ed folded. From 3m on roll.
54
www.hp-textiles.com
E-Mail: info@hp-textiles.com
MTI - Hose The MTI - Hose is the new innovation in the branch of vacuum infusion. This new technology will provide more quality, less costs and better mechanical properties. The pores of the hose membrane are v ery small, holding the resin back and only leav ing the air through the pores.
Advantages: Less investment needed f or extra machines and materials Curses the work in the same way as with any other vacuum techniques Reduce the trapped gas and air within the component part Minimisation of dry spots The results are: high porcess quality as well as an excellent build quality Technical Data:
Outer - diameter (): Max. operation temperature: Exhaust capacity / m bei pabs. 50mpas: Suitable f or: Article: HP-MTI-08 Price (/m.): 5m 10 m 25 m 50 m 100 m = 8mm net 4,67 4,41 4,09 3,82 3,46 /m /m /m /m /m
Spiral Tube for Vacuum Infusion The Spiral Tube is used as central suction line for vacuum moulding. It is fixed on the vacuum bagging f ilm with our Sealant Tape. Technical Data: Material: Diameter (): Max. operation temperature: Melting point: Article: HP-ST060 - = 6mm Price (/roll): 5 m roll 10 m roll 25 m roll 100 m (4x 25m) Incl. VAT 6,95 /roll
1,39 /m
Poly ethy len 6mm / 8mm / 10mm + 80C + 113C Article: HP-ST080 - = 8mm net 5,84 /roll
1,17 /m
Article: HP-ST100 - = 10mm net Price (/roll): 5 m roll 10 m roll 25 m roll 100 m (4x 25m) Incl. VAT 8,95 /roll
1,79 /m 1,46 /m 0,95 /m 0,71 /m
6,68 /roll.
1,34 /m. 1,05 /m 0,75 /m 0,54 /m
10,50 /roll
1,05 /m 0,77 /m 0,58 /m
8,82 /roll
0,88 /m 0,65 /m 0,49 /m
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
55
Vacuum Accessoiries
8mm
PE Vacuum-Hose - standard The PE-Hose is used in the v acuum-injection (v acuum-infusion) process. It is useable with our connectors (IQS-Standard / POM).
Technical Data: - low weight - impact resistancy - resistancy against acid, alkali and salt solutions Material: Outer - diameter (): Inner - diameter (): Temperature range: Shore-Hardness: Colour: Article: HP-VZ1010 Outer-: 10mm I Price (/roll): - Colour: nature Inner-: 8mm net 5,59 /roll
1,12 /m
Poly ethy len 10mm / 12mm 8mm / 10mm -10C up to +40C 50 D Nature
Article: HP-VZ1020 Outer-: 12mm I Price (/roll): 5 m roll 10 m roll 25 m roll 50 m roll
Peel-Ply Fabrics
9,90 /roll
0,99 /m
8,32 /roll
0,83 /m
11,40 /roll
1,14 /m
9,58 /roll
0,96 /m
16,75 /roll
0,67 /m
14,08 /roll.
0,56 /m
20,25 /roll
0,81 /m
17,02 /roll.
0,68 /m
27,50 /roll
0,55 /m
23,11 /roll
0,46 /m
34,50 /roll
0,69 /m
28,99 /roll
0,58 /m
PU Vacuum-Hose -flexibleThe PU-Hose is used in the vacuum-injection (vacuum-inf usion) process. It is useable with our connectors (IQS-Standard / POM). Technical Data: - small bending radius by special f lexibility - v ery good coldness flexibility and recov ery characteristic - kink and corrosion proof - resistant against aliphatic hy drocarbons and most lubrications - non-aging in oxigene and ozone Material: Outer - diameter (): Inner - diameter (): Temperature range: Shore-Hardness: Colour: Article: HP-VZ1030 Outer-: 10mm I Price (/roll): 5 m roll 10 m roll 25 m roll 50 m roll - Colour: transparent Inner-: 6,5mm net 11,76 /roll
2,35 /m
Article: HP-VZ1040 - Colour: transparent Outer-: 12mm I Price (/roll): 5 m roll 10 m roll 25 m roll 50 m roll Inner-: 8mm net 13,24 /roll
2,65 /m
24,60 /roll
2,46 /m
20,67 /roll
2,07 /m
28,20 /roll
2,82 /m
23,70 /roll
2,37 /m
49,75 /roll
1,99 /m
41,81 /roll
1,67 /m
58,75 /roll
2,35 /m
49,37 /roll
1,97 /m
89,50 /roll
1,79 /m
75,21 /roll
1,50 /m
107,50 /roll
2,15 /m
90,34 /roll
1,81 /m
*special flexibly
56
www.hp-textiles.com
E-Mail: info@hp-textiles.com
IQS-Connectors The Push-In Connectors (IQS-Standard) serv e as connection between the Vacuum-Hoses. They are suitable for VacuumHoses in standard PE and flexible PU .
Technical Data: Material Body : Material Seal: Temperature range: Operating pressure: Plastic/nickel-plated brass NBR (nitrile rubber) 0C up to +60C -0,95 up to 10 bar
Straight Connector Connector f or conjunction between two hoses with the same diameter. Article: HP-VZ1050 - ID = 10mm f or hoses with 10mm outer Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. Incl. VAT 3,50 3,15 2,80 net 2,94 2,65 2,35 Article: HP-VZ1060 - ID = 12mm f or hoses with 12mm outer
Connector - reducing Connector f or conjunction between two hoses with different diameters (10mm & 12mm). Article: HP-VZ1090 - ID = 10/12mm f or reduction of hoses f rom 12 to 10mm Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. Incl. VAT 3,95 3,56 3,16 net 3,32 2,99 2,66
T-Connector Connector f or the conjunction between three hoses Article: HP-VZ1070 - ID = 10mm f or hoses with 10mm outer Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. Incl. VAT 5,10 4,59 4,08 net 4,29 3,86 3,43 Article: HP-VZ1080 - ID = 12mm f or hoses with 12mm outer Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. Incl. VAT 5,61 5,05 4,49 net 4,71 4,24 3,77
Y-Connector Connector f or the conjunction of three hoses. Article: HP-VZ1120 - ID = 10mm f or hoses with 10mm outer Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. Incl. VAT 4,88 4,39 3,90 net 4,10 3,69 3,28 Article: HP-VZ1130 - ID = 12mm f or hoses with 12mm outer Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. Otto-Hahn-Strasse 22 Incl. VAT 5,91 5,32 4,73 net 4,97 4,47 3,98 D-48480 Schapen
HP-Textiles
57
Peel-Ply Fabrics
Price (/pcs.):
Incl. VAT
net
Connector with female thread Connector with female thread G 1/4 f or connecting the v acuum pump. Article: HP-VZ1100 - ID = 10mm f or hoses with 10mm inner Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. Incl. VAT 3,88 3,49 3,10 net 3,26 2,93 2,61 Article: HP-VZ1110 - ID = 12mm f or hoses with 12mm inner Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. Incl. VAT 4,40 3,96 3,52 net 3,70 3,33 2,96
Lock Valve with push-in connector Lock valv e with push-in connector for adjusting the ev acuation. Article: HP-VZ1140 - ID = 10mm f or hoses with 10mm outer Article: HP-VZ1150 - ID = 12mm f or hoses with 12mm outer net 10,50 9,45 8,40 Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. Incl. VAT 13,25 11,93 10,60 net 11,13 10,02 8,90
Peel-Ply Fabrics
Stud to close Stud to close up connectors. Article: HP-VZ1160 - OD = 10mm f or hoses with 10mm inner Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. Incl. VAT 1,17 1,05 0,94 net 0,98 0,88 0,78 Article: HP-VZ1170 - OD = 12mm f or hoses with 12mm inner Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. Incl. VAT 1,29 1,16 1,03 net 1,08 0,97 0,86
The IMC/MTI-Process...
step by step explained in an animation video!!
Follow the QR-Code to the animation of the IMC/MTI - Process... and watch our video with your smartphone or tablet
or visit us at our w ebsite www .3D-Gewebe.de and check the animation videos
58
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Standard-Push-Connector
POM
The Standard-Push-Connector (POM) serve for easy and low-priced connection between vacuum-hoses. Technical Data: Material: Temperature range: Hose Connector - straight POM 0C up to +80C POM
Connector f or conjunction between two hoses with the same diameter. Article: HP-VZ1300 - OD = 8mm f or hoses with 8mm inner Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. from 25 pcs.
Com patible with:
Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. from 25 pcs.
Com patible with:
HP-VZ1020
T-Hose Connector
POM
Connector f or the conjunction between three hoses. Article: HP-VZ1320 - OD = 8mm f or hoses with 8mm inner Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. from 25 pcs.
Com patible with:
Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. from 25 pcs.
Com patible with:
HP-VZ1020
Y-Hose Connector
POM
Connector f or the conjunction between three hoses. Article: HP-VZ1340 - OD = 8mm f or hoses with 8mm inner Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. from 25 pcs.
Com patible with:
Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. from 25 pcs.
Com patible with:
HP-VZ1020
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
59
Sandwich Material
Standard Manometer Vacuum - Manometer standing - class 2.5 - Display area -1 bar to 0 bar (Vacuum) - Bar-display (black) / PSI-display (red) - Connection: G 1/4" below - Diameter 50mm
Technical Data: Housing: Measuring system, connection, motion work Window: Temperature range: Medium: Plastic Brass Clear plastic Ambience -40C up to +60C Max. +60C Article: HP-VZ1190 - G1/4 at the back Connection: horizontal (at the back) net 6,21 5,59 4,97 Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. Incl. VAT 7,39 6,65 5,91 net 6,21 5,59 4,97
Article: HP-VZ1180 - G1/4 below Connection: vertical (below) Price (/pcs.): from 1 piece from 5 pcs. from 10 pcs. Incl. VAT 7,39 6,65 5,91
Sandwich Material
Vacuum Pump 220V Compact, low-maintenance, slide v ane rotary vacuum pump, with circulating oil lubricartion applicable for VacuumCompression & Vacuum-Infusion Ideal for the IMC/MTI-Process! Performance Data: max. v acuum: 0,933 bar relative (complies to 20mbar absolute) (complies to an applied pressure of 9930 kg/m) max. efficency by barometic pressure: 67 litre / min (= 4m/h) Equipment: Vane rotary v acuum pump incl. pulse damper und 220V mains supply. Suction-sided with check valve, suction filter and two connecting adapters. Deliv ered incl. oil! Technical Data: Article: HP-VZ1200 Vacuum Pump, 220V Price (/pcs.): 1 piece Incl. VAT 590,00 net 495,80 Max. v alid gas and ambience emperature: Motor: Engine power: Weight: Noise level: Electrical execution: Connecting adapter 1: suitable for vacuum hose HP-VZ1010 & HP-VZ1040 +12 up to + 40C 220 V / 50 Hz 150 W 5,4 kg 57 dB(A) Protection category IP55
Connection adapter 2: suitable for vacuum hose HP-VZ1020 & HP-VZ1040 (12mm connectors)
You find a c urrent picture in our Online-Shop www.3D-Gewebe.com
60
www.hp-textiles.com
E-Mail: info@hp-textiles.com
F O U NDA T I O N / P RI M ER F O R EP O X Y R ES I NS
Properties: HP-UC-9004 is a two component polyurethane primer/adhesion for applications with epoxy resins. Especially suitable for smooth, non absorptive suboils (many plastics, glass, metals, tiles, )
Features & Benefits: PUR primer for sticking or laminating on smooth surfaces high adhesion, suitable for all epoxy resins from HP-Textiles black ground coat (primer for carbon design) for spraying, manual application with paint-brush or roller is also possible wax free, without styrene
Some of these plastics may have release agents on their surfaces (such as ABS). Theses release agents must be removed completely - every trace has negative effects regarding adhesion! Because of the diversity of recycling synthetics (plastic mixtures) it is not possible to certify a universial adherence to every spezial blend.
Article: HP-UC-9004
Primer
Primer / Foundation for epoxy resins Price (): 375 ml Incl. VAT 18,90
50,40
net 15,88
42,35
750 ml
29,90
39,87
25,13
33,51
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
61
EP O X Y R ES I N S Y S T EM S
Epoxy resins have a several application uses. Whether for marine, automotive, wind power, or the creation of complex models for example Pond & Swimming pools. Epoxy resins consist primarily of two components (resin and hardener). By mixing the components, a chemical reaction occurs which results in
PRIMING
LAMIN ATING
fibre wet-out
ADHERE
sticking together
COVERING
surfaces
CASTING
fill (up)
Products
HP-E80FS
grounding, sealing
adhesion agent
++ -
+ -
+ -
++
HP-E30FB
mould surfaces
++
HP-E45KL
multi-pur pose systems
++
++
++
++
++
HP-E3000RI
infusion / inj ection systems
++1
HP-E3000GL
infusion / inj ection systems
++1
HP-E25D
covering sys tem (topcoat)
+ + + + = applicable o
+ + + ++ ++ -
o o o ++ + -
++ ++ ++ + + ++
= not provided
+ ++ + + -
HP-E40D
covering sys tem (topcoat)
HP-E25DM
covering sys tem (gelcoat)
HP-E300GB
casting system
HP-E45GA
casting system
HP-E3000WS
high heat-resistant system
HP-E30TLS
lam inating system
HP-E30TDS
covering sys tem (topcoat)
++ = very good applicable
= conditionally applicable
62
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Properties: free of solv ents - suitable f or sty rofoam or styrodur high resistance to hydrolysis (osmosis protection) good mechanical properties high adhesive force very low shrinkage low odour nuisance
VISCOSITY FEATURES
( the higher, the thicker) low high (thixotropic)
POT LIFE
(min. at 20C)
TEMPER ATURES
processing minimum (recommended) loadability (T g MAX in C)
for porous substrate (mineral, w ood, ) mould surfaces, black, aluminium filled
brownish
HP-E80FS
35
15 (20C)
n. a.
blac k
HP-E30FB HP-E5K
15 (20C)
115C
medium
brownish
HP-E60K HP-E120K
15 (20C)
n. a.
medium
slightly yellowish
HP-E45KL HP-E28L
15 (20C) 15 (20C) 18 (20C) 18 (20C) 15 (20C) 20 (20C) 18 (20C) 10 (25C) 15 (25C) 15 (25C) 10 (25C) 15 (25C) 15 (25C) 10 (20C)
66C 75C 81C 75C 93C 91C 79C 90C 98C 83C 91C 107C 92C 45C
low
bluish
HP-E55L HP-E110L
low
bluish
ver y l ow
very transparent 1
HP-E120RI HP-E300RI
HP-E15GL ver y l ow very transparent 1 very transparent very transparent very transparent transparent slightly yellowish slightly yellowish slightly yellowish coloured
1
HP-E200GL HP-E300GL
application w ith brush / roller application w ith brush / roller for casting thickness <10mm application w ith brush / roller embedding system, for casting thickness <30mm slightly yellowish, electrical castings up to 48V , for casting thickness <20mm multi-purpose system, high heat-resistance, heat curing is necessary ! laminating system for buildin g ponds / po ols covering system for buildin g ponds / po ols, couloured n. a. = data not available
low
HP-E25D
low
HP-E40D
40
10 (20C)
50C
medium
HP-E25DM
25
10 (20C)
69C
ver y l ow
HP-E300GB
300
18 (20C)
45C
medium
45
15 (20C)
67C
medium
3000
20 (180C)
200C
30
15 (20C)
50C
HP-E30TDS
30
15 (20C)
50C
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
63
high level laminating system for many applications, very good physiological compatibility
HP-E29L
Epoxy Priming Resin and Sealing The Epoxy System HP-E80FS is an unfilled, low viscosity combination of resin and hardener with high adhesion to mineralized / porous foundations. Grounding / sealing for pond and swimming pool coating
Article: HP-E80FS
Working time: 35min / low viscosity Price (): (incl. hardener) 1600g
Basis price/Kg Basis price/Kg
Characteristics and Fields of application: For a better sealing in the pore of mineralized f oundations is add on with approx. 10% XB-thinner reasonable. net 19,24
12,03
Incl.VAT 22,90
14,31
without additiv es, to be used for grounding and sealing very good wetting properties High adhesion on mineralized foundations Good mechanical properties High impact strenght Water barrier layer, surface protection osmosis protection, filler for wooden porosities
4000g
50,90
12,73
42,77
10,69
Basis price/Kg
12,8 Kg 48 Kg
137,90
10,77
115,88
9,05
443,17
9,23
372,41
7,76
Basis price/Kg
** Price for barrel upon request Product Properties: *** suitable outlet valves, see page 110 *** Chemical nature Colouring Mixing Ratio (weight) Mixing Ratio (v olumen) Mixed Viscosity Bisphenol / Epichlorohydrin resin y ellowish 100 parts resin / 60 parts hardener 100 parts resin / 68 parts hardener Low v iscosity 35 min (at 20C) 24 h (at 20C)
Working Time (pot lif e) Demouldable after Working Temperature Approx. consumption
Physical Data: Viscosity resin Viscosity hardener 700 - 1100 500 - 1500 mPa * s mPa * s DIN 16945 DIN 16945
64
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Epoxy Mould Covering Resin The Epoxy Resin System HP-E30FB is an aluminium-filled, high-viscosity combination of resin and hardener with high abrasion resistance and working time (pot life) about 30 minutes.
Article: HP-E30FB
Working time: 30min / high-viscosity Price(): (incl. hardener) 1100g
Basis price/Kg Basis price/Kg
Mould cov ering resin, aluminium-filled Abrasion and breaking resistance Non-drip, without run-off on v ertical surfaces - high thixotropic net 20,92
19,02
Incl.VAT 24,90
22,64
produced in v acuum therefore free of air bubbles Coloured in deep black Very good thermal conductiv ity User friendly mixing ratios (100:10) (If necessary dilutable with XB-thinner) f or f uirther coatings within 30 minutes, alternativ e: working with coupling layers (resin and fillers)
2750g
49,00
17,82
41,18
14,97
Basis price/Kg
5,5 Kg 11 Kg
85,00
15,45
71,43
12,99
154,90
14,08
130,17
11,83
Basis price/Kg
33 Kg
Basis price/Kg
399,00
12,09
335,29
10,16
Product Properties: Chemical nature Bisphenol / Epichlorohydrin resin Deep black 100 parts resin / 10 parts hardener high v iscous 30 min (at 20C)
** Price for barrel upon request** Colour Mixing ratio (weight) Mixed v iscosity Working time (pot lif e) Demouldable after Full cure Thermal stability Thermal stability
Physical Data: Viscosity resin Viscosity hardener ca. 80 000 200 mPa * s mPa * s DIN 16945 DIN 16945
Data of Unreinforced Resin Tensile strength Hardness shore D Density Colour 50 85 1,2 deep black g/cm visuell N/mm DIN 16945 DIN 16945 Calc.
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
65
24 h
(at 20C)
Epoxy Adhesive System The Epoxy Adhesive Systems HP-E5K, HP-E60K and HP-E120K are an unfilled medium-viscous combination of resin and hardener.
Features & Benefits: Applicable for metal, wood, rubber, ceramics, rigid foams and manyother plastic materials Cold-hardening, workable at room-temperature Possible to add fillers Tough-hard formulation Fast-setting epoxy for high-performance applications
Article: HP-E5K
Working time: 5min / medium viscosity Price (): (incl. hardener) 200g Incl.VAT 8,46
42,30
Product Properties: Mixing Ratio (weight) Mixing Ratio (v olume) Mixed Viscosity 7,11
35,55
100 parts resin / 100 parts hardener 100 parts resin / 100 parts hardener medium viscosity 5 min 10 min 24 hours 7 day s 15 - 25 C (54 - 77 F) (100g at 20C or 68 F) (at 20C or 68 F) (at 20C or 68 F)
net
Working Time (pot lif e) Hand tight Full cure Full cure Working Temperature
Basis price/kg
Basis price/kg
500g
15,33
30,66
12,88
25,77
Basis price/kg
1000g
27,81
27,81
23,37
23,37
** Price for barrel on request Physical Data: Viscosity Resin Viscosity Hardener 7000 - 9500 9000 - 16000 mPa * s mPa * s DIN 16945 DIN 16945
Data of Unreinforced Resin: Tensile strength / hardening 30 min at 20 C Tensile strength / hardening 24 h at 20 C 5 15 N/mm N/mm DIN 53455 DIN 53455
66
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Product Properties: Mixing Ratio (weight) Mixing Ratio (v olume) Mixed Viscosity 14,62
19,51
100 parts resin / 50 parts hardener 100 parts resin / 60 parts hardener medium viscosity 60 min 24 hours 7 days 15 - 25 C (100g at 20C or 68F) (at 20C or 68F) (at 20C or 68F) (54 - 77F)
net
Working Time (pot lif e) Minimun hardening time Full cure Working Temperature
Basis price/kg
1500g
Basis price/kg
29,95
19,96
25,17
16,77
Basis price/kg
7500g 15kg
99,90
13,32
83,95
11,19
159,42
10,63
133,97
8,93
Basis price/kg
Physical Data: Viscosity Resin Viscosity Hardener 7000 - 9500 150 - 350 mPa * s mPa * s DIN 16945 DIN 16945
45kg
Basis price/kg
426,91
9,48
358,75
7,97
Data of Unreinforced Resin: Shear strength (steel) Incipient crack (steel) E-Modulus 19 47 25 N/mm N/mm kN/mm DIN 53455 DIN 53455 DIN 53452
Article: HP-E120K
Working time: 120min / medium viscosity Price (): (incl. hardener) 750g
Basis price/kg
Product Properties:
Incl.VAT 17,40
23,20
net 14,62
19,51
Mixing Ratio (v olume) Mixed Viscosity Working Time (pot lif e) Minimun hardening time Full cure Working Temperature
100 parts resin / 60 parts hardener medium viscosity 120 min 24 hours 7 days (100g at 20C or 68 F) (at 20C or 68 F) (at 20C or 68 F)
1500g
Basis price/kg
29,95
19,96
25,17
16,77
Basis price/kg
7500g 15kg
99,90
13,32
83,95
11,19
15 - 25 C (54 - 77 F)
159,42
10,63
133,97
8,93
Basis price/kg
Physical Data: Viscosity Resin Viscosity Hardener 7000 - 9500 mPa * s DIN 16945 DIN 16945
45kg
Basis price/kg
426,91
9,48
358,75
7,97
Data of Unreinforced Resin: Shear strength (steel) Shear strength (ep-laminate) Incipient crack (steel) E-Modulus 25 20 4-7 2-4 N/mm N/mm N/mm kN/mm DIN 53455 DIN 53455 DIN 53282 DIN 53452
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
67
Adhesive / Laminating Resin The epoxy laminating resin system HP-E45KL is an unfilled, medium-viscosity combination of resin and hardener with a working time (pot life) of approx. 45 minutes. It can be used for bonding and lamination, as well as medium-duty resin coating for clear surfaces. Article: HP-E45KL
Working time: 45min / medium viscosity Price (): (incl. hardener) 400g Incl.VAT 9,90
24,75
Features & Benefits: As laminating resin Excellent wet-out of fibreglass, carbon and aramid fibres Causes glossy, non-gluey surfaces
net 8,32
20,80
Basis price/kg
Cold-hardening, demoudable at room temperature With f iller usable as mould making resin as adhesive resin: due to a good adhesion f or bonding / fillers can be added (eg. with f iller usable as mould making resin HP-MB2 and HP-BF1) As a covering layer resin: clear, tack-free surf ace high resistance to many chemicals (resistance list available upon request). Can be used for coating in tanks, pipelines, ponds and terariums.
Basis price/kg
800g
13,50
16,88
11,34
14,18
Basis price/kg
1600g 4 Kg
22,90
14,31
19,24
12,03
Basis price/kg
50,90
12,73
42,77
10,69
12,8 Kg
Basis price/kg
137,90
10,77
115,88
9,05
48 Kg
Basis price/kg
443,17
9,23
372,41
7,76
** Price for barrel upon request HP-E45KL is also f ree of nony lphenol and contains no reactiv e diluents *** suitable outlet valves, see page 110 *** Product Properties:
Chemical nature Colouring Mixing Ratio (weight) Mixing Ratio (volume) Mixed Viscosity Working Time (pot lif e) Demouldable after Full Cure Working Temperature
Bisphenol / Epichlorohydrin resin without colour (resin), amber (hardener) 100 parts resin / 60 parts hardener 100 parts resin/ 70 parts hardener Medium v iscosity 45 min 48 h (at 20C) (at 20C)
Physical Data: Viscosity Resin Viscosity Hardener 8000 450 mPa * s mPa * s DIN 16945 DIN 16945
Data of Unreinforced Resin: Tensile strength Elongation Flexural strength E-Modulus 55 - 60 4-5 80 - 100 3 N/mm % N/mm kN/mm DIN 53455 DIN 53455 DIN 53452 DIN 53452
68
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Standard Laminating Resin The epoxy systems HP-E28L, HP-E55L and HP-E110L are unfilled low-viscosity combinations of resin and hardener.
Features & Benefits: Excellent wet-out of fibre glass, carbon and aramid fibres Cold-hardening, demouldable at room-temperature Very good saturating Possible to add all our fillers Construction of thin-film laminates
Article: HP-E28L
Working time: 28min / low viscosity Price (): (incl. hardener) 700g
Basis price/Kg Basis price/Kg
Bisphenol / Epichlorohydrin resin without colour (resin), light blue (hardener) 100 parts resin / 40 parts hardener 100 parts resin / 44 parts hardener Low v iscosity 28 min 24 h (at 20C) (at 20C)
Incl.VAT
net 10,50
15,00
Mixing Ratio (v olume) Mixed Viscosity Working Time (pot lif e) Demouldable after Full Cure Working Temperature
1400g 2800g 7 Kg
19,90
14,21
16,72
11,94
Basis price/Kg
36,90
13,18
31,01
11,08
74,90
10,70
62,94
8,99
Basis price/Kg
42 Kg
Basis price/Kg
381,80
9,09
320,84
7,64
mPa * s mPa * s
Data of Unreinforced Resin: Tensile strength Elongation Flexural strength E-Modulus 60 - 70 3-5 100 - 110 3 N/mm % N/mm kN/mm DIN 53455 DIN 53455 DIN 53452 DIN 53452
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
69
Physical Data:
Product Properties: Chemical nature Colouring Mixing Ratio (weight:) Bisphenol / Epichlorohydrin resin without colour (resin), light blue (hardener) 100 parts resin / 40 parts hardener 100 parts resin / 44 parts hardener Low v iscosity 55 min 24 h (at 20C) (at 20C)
net 10,50
15,00
Basis price/kg
Mixing Ratio (v olume) Mixed Viscosity Working Time (pot lif e) Demouldable after Full Cure Working Temperature
1400g
Basis price/kg
19,90
14,21
16,72
11,94
Basis price/kg
2800g 7 Kg
36,90
13,18
31,01
11,08
Basis price/kg
74,90
10,70
62,94
8,99
42 Kg
Basis price/kg
381,80
9,09
320,84
7,64
Physical data: ** Price for barrel upon request Viscosity Resin Viscosity Hardener 600 - 900 50 - 100 mPa * s mPa * s DIN 16945 DIN 16945
Data of Unreinforced Resin: Tensile strength Elongation Flexural strength E-Modulus 60 - 70 4-5 100 - 110 3 N/mm % N/mm kN/mm DIN 53455 DIN 53455 DIN 53452 DIN 53452
Article: HP-E110L
Working time: 110min / low viscosity Price (): (incl. hardener) 700g Incl.VAT 12,50
17,86
Product Properties: Chemical nature Colouring Mixing Ratio (weight) Bisphenol / Epichlorohydrin resin without colour (resin), light blue (hardener) 100 parts resin / 40 parts hardener 100 parts resin / 44 parts hardener Low v iscosity 110 min 48 h 7 days 18 - 25 C (at 20C) (at 20C) (at 20C)
net 10,50
15,00
Basis price/kg
Mixing Ratio (v olume) Mixed Viscosity Working Time (pot lif e) Demouldable after Full cure Working Temperature
1400g
Basis price/kg
19,90
14,21
16,72
11,94
Basis price/kg
2800g 7 Kg
36,90
13,18
31,01
11,08
74,90
10,70
62,94
8,99
Basis price/kg
42 Kg
Basis price/kg
381,80
9,09
320,84
7,64
Physical Data: ** Price for barrel upon request Viscosity Resin Viscosity Hardener 600 - 900 40 - 90 mPa * s mPa * s DIN 16945 DIN 16945
Data of Unreinforced Resin: Tensile strength Elongation Flexural strength E-Modulus 55 2-3 NN 3,1 N/mm % N/mm kN/mm DIN 53455 DIN 53455 DIN 53452 DIN 53452
70
www.hp-textiles.com
E-Mail: info@hp-textiles.com
High Strength Thermosetting Resin The thermosetting epoxy systems HP-E29L, HP-E56L and HP-E111L are unfilled low-viscosity combinations of resin and hardener with high-strength. They are based on our successful laminating resins HP-E28L, HP-E55L and HPE110L. The high-strength laminating epoxy resins are developed in close collaboration with our customers in concentration on industrial productions. They submit a high transfer rate due to accelerating curing at higher temperatures and good mechanical properties. With blending different hardener it is possible to adjust a flexible curing time (pot life) between 25 and 110 minutes. Of course it is possible to add filling agents like microballoons, cotton flocks, thixotropy powder or colour pigments from HP-Textiles.
A combination w ith suitable gelcoats, based on polyester, polyurethane and epoxy is achievable as well. Moreov er, the systems show very good physiological compatibilities in comparison to many other resins .
Features & Benefits: Excellent wet-out of fiberglass, carbon and aramid fibers Cold-hardening, demouldable at room-temperature Very good saturating Possible to add all our fillers Binding agent for fibrous materials and mouldings Construction of thin-film laminates Individual colouring on request Good physiological compatibility
Geltime / Demouldable: HP-E29L Geltime Geltime Demouldable at 20C Demouldable at 40C Full cure at 20C (h/20C) (h/40C) (h) (h) (d) 3-5 2 - 2,5 24 6 7 HP-E56L 3 - 5,5 2 - 2,5 30 7 7 HP-E111L 3,5 - 6 2 - 3,5 48 9 7
Product specifications: Viscosity resin Viscosity hardener 600 - 900 100 - 200 mPa * s mPa * s DIN 16945 DIN 16945
The mechanical properties are verified by independent departments like the University of Applied Sciences in Osnabrck / Lower Saxony, Germany.
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
71
Product Properties: Colouring Mixing Ratio (weight) Mixing Ratio (v olume) Mixed Viscosity Working Time (pot lif e) Demouldable after Demouldable after Working Temperature Full Cure Without colour (resin) / blue/green hardener) 100 parts resin / 40 parts hardener 100 parts resin / 44 parts hardener Low v iscosity 25 min 6h 24 h 15-22C 7 days (at 20C) (at 20C) (at 40C) (at 20C)
Incl.VAT 23,90
17,07
net 20,08
14,35
2800g 7 Kg
42,90
15,32
36,05
12,88
Basis price/Kg
89,00
12,71
74,79
10,68
42 Kg
Basis price/Kg
490,00
11,67
411,76
9,80
Data of Unreinforced Resin: Tensile strength Elongation Flexural strength E-Modulus Hardness (Shore D) Water absorption (48/168h at 20C) 70 - 75 3-5 100 - 110 >3 85 0,38 % N/mm % N/mm kN/mm DIN ISO 527-2 DIN 53455 DIN 53455
Article: HP-E56L
Product Properties: Colouring Mixing Ratio (weight) Mixing Ratio (v olume) Mixed Viscosity Working Time (pot lif e) Working Temperature Demouldable after Demouldable after Full Cure Without colour (resin) / blue/green (hardener) 100 parts resin / 40 parts hardener 100 parts resin / 44 parts hardener Low v iscosity 55 min (at 20C)
Working time: 55 min / low viscosity Price (): (incl. hardener) 1400g
Basis price/Kg
Incl.VAT 23,90
17,07
net 20,08
14,35
2800g
Basis price/Kg
42,90
15,32
36,05
12,88
Basis price/Kg
7 Kg
89,00
12,71
74,79
10,68
42 Kg
Basis price/Kg
490,00
11,67
411,76
9,80
Data of Unreinforced Resin: Tensile strength Elongation Flexural strength E-Modulus Hardness (Shore D) Water absorption (48/168h at 20C) 70 3-5 100 - 110 >3 85 0,33 % N/mm % N/mm kN/mm DIN ISO 527-2 DIN 53455 DIN 53455
72
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Product Properties: Colouring Mixing Ratio (weight) Mixing Ratio (v olume) Mixed Viscosity Working Time (pot lif e) Working Temperature Demouldable after Demouldable after Full Cure Without colour (resin) / blue/green (hardener) 100 parts resin / 40 parts hardener 100 parts resin / 44 parts hardener Low v iscosity 110 min 20 - 30C 9h 48 h (at 40C) (at 20C) (at 20C)
Incl.VAT 23,90
17,07
net 20,08
14,35
2800g 7 Kg
42,90
15,32
36,05
12,88
Basic price/Kg
89,00
12,71
74,79
10,68
42 Kg
Basic price/Kg
490,00
11,67
411,76
9,80
** Price for barrel upon request Data of Unreinforced Resin: Tensile strength Elongation Flexural strength E-Modulus Hardness (Shore D) Water absorption (48/168h at 20C) 68 3-5 100 - 110 >3 85 0,33 % N/mm % N/mm kN/mm DIN ISO 527-2 DIN 53455 DIN 53455
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
73
Epoxy Injection-Resin HP-E3000RI Base of the series HP-E3000RI is an unf illed epoxy-resin, which is mixable with different hardeners f or several applications. The hardeners HP-E30RI, and HP-E300RI allow pot-life times between 30 and 300 minutes. Furthermore the special hardener HP-E120RI prov ides higher temperature stabilities. The injection- / infusion-resins of the series HP-E3000RI show v ery low viscosities, what supports excellent wet-out and f low properties. The series is usable f or hand-laminating, too.
Features & Benefits: for applications in modelmaking, automotiv e-industry and building of boats and rotor blades excellent wet-out in inf usion- or injection-process warm-hardening, demouldable at higher temperature high dy namic and static strength with thixotroping agent HP-PK22 applicable f or handlaminating glas transition temperature 98 C (with hardener HP-E120RI usable for RTM / RI - process
Processing:
Resin E3000RI
Hardener E30RI
Hardener E120RI
Hardener E300RI
Method
Colour Colour Index Mixing ratios Pot lif e time (at 20C) Possible working temperature [Gardner] [by weight] [minutes] [C]
Data of unreinforced Resin: 1) Density Tensile strength Elongation Flexural strength E-Modulus Glass transition temperature Hardness (Shore D) Data of unfilled samples. Curing schedule with hardener HP-E30RI HP-E300RI HP-E120RI [h at C] [h at C] [h at C] 24h at 20C + 5h/60C + 6h/80C 24h at 20C + 5h/60C + 6h/80C 24h at 20C + 5h/60C + 6h/80C + 2h/120C [g/cm] [mPa] [%] [MPa] [kN/mm] [C] 1.1 72 4-5 110 3 90 82 1.1 71 4-5 110 2.9 98 83 1.1 72 5-6 110 3 83 83 PM.01.002 PM.01.004 PM.01.004 PM.01.005 PM.01.004 PM.01.011 PM.01.009
) The mechanical properties are v erified by independent departments , acc ording to DIN EN ISO 527.
74
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Article: HP-HTE30RI
Working time: Quantity 0,75 Kg
Basic price/Kg Basic price/Kg
(Hardener)
approx. 30min. (at 20C)
net 13,90
18,53
2,4 Kg 9 Kg
47,01
19,59
39,50
16,46
Basic price/Kg
141,61
15,73
119,00
13,22
Basic price/Kg
25 Kg 50 Kg
368,31
14,73
309,50
12,38
Basic price/Kg
708,05
14,16
595,00
11,90
Article: HP-HE3000RI
(Resin)
net 13,40
17,87
Quantity
Incl. VAT
net
Basic price/Kg
0,75 Kg 2,4 Kg
Basic price/Kg
2,5 Kg 8 Kg
31,95
12,78
26,85
10,74
44,98
18,74
37,80
15,75
200min.
Basic price/Kg
Basic price/Kg
82,71
10,34
69,50
8,69
Basic price/Kg
15,11
12,69
Basic price/Kg
30 Kg
279,00
9,30
234,45
7,82
25 Kg
Basic price/Kg
344,98
13,80
289,90
11,60
Basic price/Kg
200 Kg
1.659,93
8,30
1.394,90
6,97
Basic price/Kg
50 Kg
665,21
13,30
559,00
11,18
net 11,90
15,87
2,4 Kg 9 Kg
39,87
16,61
33,50
13,96
Basic price/Kg
112,93
12,55
94,90
10,54
Basic price/Kg
25 Kg 50 Kg
289,77
11,59
243,50
9,74
546,21
10,92
459,00
9,18
Basic price/Kg
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
75
9 Kg
135,96
114,25
0m in .
Epoxy Resin System with a statement of approval of the Germanische Lloyd The whole system has a statement of approval of the Germanischer Lloyd for the building of boats and wind-driven power stations. (Approval No. WP 1220047 HH) The basis of the series HP-E3000GL is an unfilled epoxy -resin, which is mixable with different hardeners f or ev ery individual purpose. A special f eature of this series is a high initial glass transition temperature (Tg) by hardening at room temperature. The use of the hardener HP-E200GL increases the maximum glass transition temperature (Tg MAX) up to 107C. The series also has a high transparency so that it is very suitable for visible carbon parts.
Features & Benefits : extremely low viscosity, so it has a very good fibre wet-out high static and dynamic strength pot life time can be freely adjusted between 15 min (hardener HP-E15GL) and 300 min (hardener HPE300GL) glass transition temperature (Tg max) up to 107 C (hardener HP-E200GL)
Fields of Application:
vacuum-inf usion methods (IMC/MTI, RI, VARI, SCRIMP pressure injection methods (RTM, RIM) filament winding hand laminating building of boats and wind-driv en power stations optical application such as visible carbon parts (HP-200GL)
Verarbeitungsdaten:
Resin E3000GL
method
Mixing ratio (weight) Pot lif e time (at 20C) Optimal processing temperature Minimal processing temperature Spezifikationen Einzelkomponente: Viscosity (25C)
15 20 - 25 10
200 20 - 30 15
300 20 - 30 15
[mPa s]
600 - 800
20 - 30
40 - 60
8 - 13
PM.01.003
1.14 - 1.16
ISO 1183-A ISO 527 ISO 527 ISO 178 ISO 178 HP04.08 after Temp.
[h bei C]
5h/60C and 6h/80C 5h/60C and 6h/80C 5h/60C and 6h/80C (and for Tg max.) 2h/120C
Recommended Curing Cicle HP-E300GL [h bei C] Recommended Curing Cicle HP-E200GL [h bei C]
76
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Epoxy resin system HP-E3000GL The whole system has a statement of approval of the Germanischer Lloyd for the building of boats and wind-driven power stations. (Approval No. WP 1220047 HH) Article: HP-HTE15GL Working time: Quantity 0,75 Kg
Basic price/Kg Basic price/Kg
net 14,20
18,93
2,4 Kg 9 Kg
48,49
20,21
40,75
16,98
Basic price/Kg
144,94
16,10
121,80
13,53
Basic price/Kg
25 Kg 50 Kg
380,68
15,23
319,90
12,80
Basic price/Kg
736,61
14,73
619,00
12,38
Article: HP-HTE200GL (Hardener) Working time: Quantity approx. 200min. (bei 20C) Incl. VAT 16,07
21,42
Article: HP-HE3000GL
(Resin)
net 13,50
18,00
Quantity
Incl. VAT
net
Basic price/Kg
0,75 Kg 2,4 Kg
Basic price/Kg
2,5 Kg 8 Kg
32,70
13,08
27,48
10,99
46,29
19,29
38,90
16,21
200min.
Basic price/Kg
Basic price/Kg
10,62
8,93
Basic price/Kg
15,19
12,77
Basic price/Kg
30 Kg
286,79
9,56
241,00
8,03
25 Kg
Basic price/Kg
355,81
14,23
299,00
11,96
Basic price/Kg
200 Kg
1.717,74
8,59
1.443,48
7,22
50 Kg
Basic price/Kg
689,01
13,78
579,00
11,58
Article: HP-HTE300GL (Hardener) Working time: Quantity 0,75 Kg 2,4 Kg 9 Kg approx. 300min. (bei 20C) Incl. VAT 14,88
19,83
net 12,50
16,67
Basic price/Kg
Basic price/Kg
41,53
17,30
34,90
14,54
Basic price/Kg
117,81
13,09
99,00
11,00
Basic price/Kg
25 Kg 50 Kg
296,31
11,85
249,00
9,96
Basic price/Kg
570,01
11,40
479,00
9,58
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
77
84,97
71,40
9 Kg
136,73
114,90
0m in .
Covering Resin System The epoxy covering resin systems HP-E25D, HP-E40D andHP-E25DM are unfilled, low-viscosity combinations of resin and hardener with higher UV-resistance. Features & Benefits: Sealing for metal, wood, plastics, concrete, screed Causes clear, non-gluey surfaces Higher resistance to UV radiation, low tendency to yellowing Excellent mechanical properties, high impact strength Osmosis protection, filler for wooden porosities Carbon look laminates Water barrier layer, surface protection, varnish
Article: HP-E25D
Working time: 25min / low viscosity Price (): (incl.hardener) 400g Incl.VAT 12,30
30,75
Product Properties: Chemical nature Colouring net Mixing Ratio (weight) 100 parts resin / 60 parts hardener 100 parts resin / 64 parts hardener low v iscosity 25 min (at 20C) 24 h 7 day s 15 - 25 C (at 20C) 10,34
25,85
Basis price/Kg
Mixing Ratio (v olume) Mixed Viscosity Working Time (pot lif e) Demouldable after Full cure Working Temperature
Basis price/Kg
800g
18,90
23,63
15,88
19,85
Basis price/Kg
1600g 4 Kg
28,90
18,06
24,29
15,18
58,90
14,73
49,50
12,38
Basis price/Kg
12,8 Kg
Basis price/Kg
172,90
13,51
145,29
11,35
Physical Data: Viscosity Resin Viscosity Hardener 700 - 1100 300 - 400 mPa * s mPa * s DIN 16945 DIN 16945
48 Kg
Basis price/Kg
536,61
11,18
450,93
9,39
** Price for barrel upon request Data of Unreinforced Resin: *** suitable outlet valves, see page 110 *** Tensile strength Elongation Flexural strength E-Modulus 50 - 55 6-7 70 - 80 3 N/mm % N/mm kN/mm DIN 53455 DIN 53455 DIN 53452 DIN 53452
78
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Bisphenol / Epichlorohydrin resin without colour / transparent 100 parts resin / 50 parts hardener 100 parts resin / 57 parts hardener low v iscosity 40 min (at 20C) 24 h (at 20C)
Incl.VAT
net 13,36
17,81
Mixing Ratio (volume) Mixed Viscosity Working Time (pot lif e) Demouldable after Working Temperature Full cure
1500g
Basis price/Kg
24,90
16,60
20,92
13,95
Basis price/Kg
3000g
39,90
13,30
33,53
11,18
7,5 Kg
Basis price/Kg
89,00
11,87
74,79
9,97
10 - 25 C 7 day s
37,5 Kg
Basis price/Kg
429,00
11,44
360,50
9,61
Physical data: Viscosity Resin Viscosity Hardener 700 - 1100 50 - 150 mPa * s mPa * s DIN 16945 DIN 16945
Data of Unreinforced Resin: Tensile strength Elongation Flexural strength E-Modulus 40 - 45 3-4 70 - 80 3 N/mm % N/mm kN/mm DIN 53455 DIN 53455 DIN 53452 DIN 53452
Article: HP-E25DM
Working time: 25min / medium viscosity Price (): (incl. hardener) 400g
Basis price/Kg
Product Properties: Chemical nature Colouring Mixing Ratio (weight) Bisphenol / Epichlorohydrin resin without colour / transparent 100 parts resin / 60 parts hardener 100 parts resin / 64 parts hardener medium viscosity 40 min (at 20C) 24 h (at 20C)
Incl.VAT 12,30
30,75
net 10,34
25,85
Mixing Ratio (v olume) Mixed Viscosity Working Time (pot lif e) Demouldable after Working Temperature Full cure
800g
Basis price/Kg
18,90
23,63
15,88
19,85
Basis price/Kg
1600g 4 Kg
28,90
18,06
24,29
15,18
58,90
14,73
49,50
12,38
10 - 25 C 7 day s
Basis price/Kg
12,8 Kg
Basis price/Kg
172,90
13,51
145,29
11,35
48 Kg
Basis price/Kg
536,61
11,18
450,93
9,39
Physical data: Viscosity Resin Viscosity Hardener 7000 - 9500 300 - 400 mPa * s mPa * s DIN 16945 DIN 16945
** Price for barrel upon request Data of Unreinforced Resin: Tensile strength Elongation Flexural strength E-Modulus 50 - 60 4-5 80 - 100 3 N/mm % N/mm kN/mm DIN 53455 DIN 53455 DIN 53452 DIN 53452
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
79
-transparent-
The Epoxy -System HP-E300GB is an unf illed, low-v iscosity combination of resin and hardener with working time (pot lif e) of more than 300 minutes.* Usable for epoxy casting of medium thickness (up to approx. 30mm*) and slightly increased temperatures.* Features & Benefits: transparent, low shrink-casting with tacky -free surf aces very good flow behav iour (low-v iscosity ) cold-hardening, demouldable at room-temperature, applicable at slightly increased temperatures high f illable casting resin causes pressure-resistant and impact-resistant (tough) moulds / components with high strength and v ery less shrinkage
Article: HP-E300GB
Working time: 300min / low viscous Price (): (incl. hardener) 1350g Incl.VAT 22,95
17,00
net 19,29
14,29
Basic price/Kg
Basic price/Kg
3375g
51,55
15,27
43,32
12,84
Basic price/Kg
8,1 Kg
99,80
12,32
83,87
10,35
Basic price/Kg
13,5 Kg
155,93
11,55
131,03
9,71
Industrial modelling / hobby modelling / boatbuilding: foundry patterns, die plates, reproduction patterns
building of medium moulds and castings encapsulation of decorative elements levelling compound / injection resin for structural repairs
Product Properties: Colouring Mixing ratios without colour (resin) slightly y ellowish (hardener) 100 parts resin : 35 parts hardener (by weight) 100 parts reins : 41 parts hardener (by volume) low-v iscous (details below) > 300 min. (at 20C) > 48 h > 24 h 7 days 18 - 35 C (at 20C) (at 30C) (at 20C)
Mixed v iscosity Working time (pot lif e) Demouldable after* Full cure Working temperature
Product Specifications: Viscosity Resin (at 23C) Viscosity Hardener (at 23C) 450 15 cps cps DIN 16945 DIN 16945
1,1 75
g/cm
transparent / colourless
80
www.hp-textiles.com
E-Mail: info@hp-textiles.com
semi-transparent-
The Epoxy -System HP-E45GA is an unf illed, medium-viscosity combination of resin and hardener with working time (pot lif e) of approx. 45 minutes.* Usable for epoxy casting of medium thickness (up to approx. 20mm*)
Article: HP-E45GA
Working time: approx. 45min / medium viscous
Features & Benefits: semi-transparent, low shrink-casting with tacky -free surf aces good f low behaviour (medium-viscosity ) cold-hardening, demouldable at room-temperature
Incl.VAT 9,90
24,75
net 8,32
20,8
Basic price/Kg
high f illable casting resin cause pressure-resistant and impact-resistant (tough) moulds / components with high strength
Basic price/Kg
800g
13,95
17,44
11,72
14,65
Basic price/Kg
1600g 4 Kg
23,95
14,97
20,13
12,58
53,75
13,44
45,17
11,29
foundry patterns, die plates, reproduction patterns building small moulds and castings with slightly yellow colour encapsulation of decorative elements levelling compound dielectric resin for electrical embedding up to 48 Volts
12,8 Kg
Basic price/Kg
129,75
10,14
109,03
8,52
HP-E45GA is free of nonylphenol and contains no active diluents! Product Properties: Colouring Mixing ratios Mixed v iscosity Working time (pot lif e) Demouldable after* without colour (resin) slightly hardener (by weight) 100 parts resin : 60 parts hardener (by weight) 100 parts resin : 70 parts hardener (by volume) 45 minutes (at 20C) > 12 h >6 h Full cure Working temperature 7 day s 15-25 C (at 20C) (at 30C) (at 20C)
Product Specifications: Viscosity Resin (at 23C) Viscosity Hardener (at 23C) 8000 350 cps cps DIN 16945 DIN 16945
1,1 82
g/cm
slightly y ellowish
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
81
High Heat-Resistant Epoxy-System The Epoxy-System HP-E3000WS is an unfilled, medium-viscosity, three component combination of resin, hardener and accelerator with a long working time. It is versatile for laminating, bonding / gluing, covering and for casting resin for temperatures up to 200C.
Features & Benefits: it adheres to metal, wood, rubber, ceramics and various plastics good wet-out of fiberglass, carbon and aramid fibres high static and dynamic strength causes non-sticky surfaces heat-hardening, tempering is necessary versatile for laminating, bonding / gluing, covering and casting creation of heat stressed composite structures (up to 200C after tempering
Article: HP-E3000WS
Working time: 3000min / medium viscous Price (): (incl. hardener) 2040g
Basic price/Kg
Verarbeitungsdaten: Colouring Mixing ratio (by weight) colourless (resin) / amber (hardener) 100 parts resin / 100 parts hardener / 2 parts accelerator on the total quantity of resin and hardener 100 parts resin / 100 parts hardener / 2 parts accelerator on the total quantity of resin and hardener Medium v iscosity 3000 minutes 10 h (at 20C)
Incl.VAT 47,50
23,28
net 39,92
19,57
10,2 Kg
Basic price/Kg
169,90
16,66
142,77
14,00
Basic price/Kg
61,2 Kg
890,00
14,54
747,90
12,22
(at 80C)
** Price for barrel upon request Product Specifications: *** suitable outlet valves see page 110 *** Viscosity Resin / 25C Viscosity Hardener / 25C Working temperature 8000 - 10000 40 - 80 10 - 25C mPa * s mPa * s PM.01.003 PM.01.003
To achieve the maximum temperature properties, a stepped post cure treatment is required: For example.: 140C working temperature = 15h post curing necessary at 130-140C (heating rate 20C/h) 200C working temperature = 15h post curing necessary at 180-190C (heating rate 20C/h) For specific information please see the technical data sheet!
82
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Pondbuilding Epoxy Resin System Realize your dream of ow ning a sw imming pool/pond or Koi pond." In order to achieve the highest quality and user-friendly processing we recommend the use of our epoxy HP-E30TLS and HP-E30TDS. Highly recommended for professional applications. The Epoxy Laminating Resin System HP-E30TLS (laminating system) is an unfilled, low-viscosity combination of resin and hardener with an medium working time (pot life) for high quality Pondbuilding, Poolbuilding and Roof coating.Further more this system has excellent wet-out of fiberglass, very good mechanical properties and very good saturating. The Epoxy Laminating Resin System HP-E30TDS (cov ering system) is an unfilled, thixotropic combination of resin and hardener with a medium working time (pot life) for high quality Pondbuilding Coverings. This system is colour-pigmented and has very good adhesion to laminates, high resistance to many chemicals and osmosis protection.
Product Properties: Mix ratio (by weight) Mixed v iscosity Working time (pot lif e) Accessible Accessible Full cure Working temperature (optimal) HP-E30TLS 100 parts resin / 60 parts hardener Low v iskosity 30 min 24 h 48 h 7 days (at 20C) (at 15C) (at 10C) (at 20C) HP-E30TDS 100 parts resin / 53 parts hardener thixotrop 30 min 24 h 48 h 7 days 15 - 25 C (at 20C) (at 15C) (at 10C) (at 20C)
15 - 25 C
Unit of quantity: 1 bundle = 3300 g Colour: RAL 5012 - light blue RAL 7016 - anthracite grey net 33,49
11,16
RAL 7035 - light grey Price () pro bundle: (incl. hardener) from 1 bundle
Basic price/Kg
from 3 bundle
Basic price/Kg
37,86
12,62
31,82
10,61
net 41,93
12,71
from 5 bundle
Basic price/Kg
37,06
12,35
31,14
10,38
from 3 bundle
Basic price/Kg
48,40
14,67
40,67
12,32
from 5 bundle
Basic price/Kg
47,40
14,36
39,83
12,07
Colour:
net 37,73
11,43
from 3 bundle
Basic price/Kg
43,55
13,20
36,60
11,09
from 5 bundle
Basic price/Kg
42,65
12,93
35,84
10,86
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
83
P O L Y ES T ER R ES I N S Y S T EM S
Poly ester resins are prized f or their durability and weather resistance, making the usef ul for many outdoor and indoor applications. Poly ester resins are the most widely used resins. They are very used in many different and diversified applications like, marine industry, pond / pool coatings processes and so on.
LAMINATING
ADHERE
COVERING
(gel- / topcoat) in f emale moulds (gelcoat) on top (topcoat)
CASTING
f ill (up)
Products
HP-P21L
la minating resin (wax free)
f ibre wet-out
sticking together
embedding
++
HP-P21LP
la minating resin (wax containing) ++ + -
HP-P21LPG
la minating resin (wax containing) ++ + -
HP-P21LS
la minating resin (wax free)
++
HP-P21LSP
la minating resin (wax containing) ++ + -
HP-P21TC *
topcoat (wax containing)
++
HP-P21GC *
gelcoat (wax free)
++
HP-P30GB
casting resin (wax free)
++ = ver y good applicable
++
= applicable
= conditionally applicable
= not provided
84
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Properties: Excelent v alue compared to other matrix resins, Good chemical resistance LSE (low Sty rene Emission) poly ester resin Simple dosage setting The viscosity can be adjusted with the addition of thixotropic powder (HP-PK22)
FEAUT URES
SURFACE
tacky-f ree surf ace ? Improv ed chemical resistance ?
POT LIFE
(min at 20C)
loadability
(HDT / C)
ORTHO, LSE, slightly thixotropic, lam inating resin for frp ponds
no
no
15-20
15
60
yes
no
15-20
15
60
ORTHO, LSE, approv al from Lloyds Register, slightly thix otropic ISO/NPG, LSE, slightly thix otropic, lam inating resin for frp ponds / pools
yes
no
15-20
15
70
no
yes
15-20
15
> 90
ISO/NPG, LSE, slightly thix otropic thixotropic, colourless or coloured, high quality topcoat, suitabl e for frp ponds / pools thixotropic, colourless or coloured
yes
yes
15-20
15
> 90
yes
yes
15-20
18
> 80
no
yes
15-20
18
> 80
no
no
30
18
70
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
85
Laminate Polyester Resin- wax free / tacky curing The LSE polyester laminating system HP-P21L is an unfilled, low-viscosity combination of resin and hardener with short working time (pot life). Article: HP-P21L
Working time: Price (): (incl. hardener) 1 Kg resin/ 20ml har dener
Basic price/Kg
Features & Benefits: Unsaturated poly ester resin Orthophtalic-based, pre-accelerated, high thixotropic index Wax free, tacky for further bonds / lay ers Good mechanical properties Excellent wet-out of fibre glass, carbon and aramid f ibres Applicable for hand lay -up, spray and for general reinf orced plastics Laminating tanks, containers, f loating equipments, pools, ponds, modelmaking, car industry... LSE ( Low Sty rene Emission) poly ester resin Contains peroxide-idicator
net 8,32
8,16
32,90
6,45
27,65
5,42
56,90
5,58
47,82
4,69
142,75
4,67
119,96
3,92
199,80
3,92
167,90
3,29
684,79
3,04
Product Properties: Mixing ratios (by weight or v olume) Mixed Viscosity Working Time (pot lif e) Demouldable after Full Cure Working Temperature Following lay ers without grinding within 100 parts resin / 1-3 parts hardener low v iscosity 15 - 20 min 24 h 2 days 15 - 25C 7 days (at 20C) (at 20C) (at20C) (at 20C)
Data of Unreinforced Resin: Tensile strength Elongation at break Flexural strength 62 1,7 110 7,4 4100 45 60 MPa % MPa kJ/m MPa Barcol B C ISO 527 ISO 527 ISO 178 ISO 179 ISO 527 ASTM D2583 ISO R 75
Impact resistance E-Modulus Hardness * Project zoo - therapy center Mnzesheim (Kraichtal hospital) Heat distortion temperature
86
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Orthophtalic-based, w axed for finish uses The LSE polyester laminating system HP-P21LP is an unfilled, low-viscosity combination of resin and hardener with short working time (pot life). Article: HP-P21LP
Working time: Price (): (incl. hardener) 1 Kg resin/ 20ml har dener
Basis price/kg
Features & Benefits: Unsaturated poly ester resin Orthophtalic-based, pre-accelerated, high thixotropic index Waxed f or top or finish uses (prevent coats of resin f rom remaining sticky Good mechanical properties Excellent wet-out of fibre glass, carbon and aramid f ibres Applicable for hand lay -up, spray and for general reinf orced plastics Laminating tanks, containers, f loating equipments, pools, ponds, modelmaking, car industry... LSE ( Low Styrene Emission) polyester resin Contains peroxide-idicator
net 8,32
8,16
32,90
6,45
27,65
5,42
56,90
5,58
47,82
4,69
142,75
4,67
119,96
3,92
199,80
3,92
167,90
3,29
684,79
3,04
Product Properties: Mixing Ratios (by weight or v olume) Mixed Viscosity Working Time (pot lif e) Demouldable after Full Cure Working Temperature Following lay ers without 100 parts resin / 1-3 parts hardener Low v iscosity 15 - 20 min 24 h 2 days 15 - 25C 1 day (at 20C) (at 20C) (at 20C) (at 20C)
Product Specifications: Viscosity Resin (at 25C) 500 - 600 mPa * s DIN 53015
Data of Unreinforced Resin: Tensile strength Elongation at break Flexural strength Impact resistance E-Modulus Hardness Heat distortion tempera62 1,7 110 7,4 4100 45 60 MPa % MPa kJ/m MPa Barcol B C ISO 527 ISO 527 ISO 178
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
87
ISO 179
Orthophtalic-based, approval to Lloyds Register of Shipping The LSE polyester laminating system HP-P21LPG is an unfilled, low-viscosity combination of resin and hardener . Article: HP-P21LPG
Working time: Price (): (incl. hardener) 1 Kg resin/ 20ml har dener
Basic price/Kg
Features and benefits: Unsaturated poly ester resin Orthophtalic-based, pre-accelerated, high thixotropic index Waxed f or top or finish uses (prevent coats of resin f rom remaining sticky. Good mechanical properties Excellent wet-out of fibre glass, carbon and aramid f ibres Applicable for hand lay -up, spray and for general reinf orced plastics Laminating tanks, containers, f loating equipments, pools, ponds, modelmaking, car industry... LSE ( Low Styrene Emission) polyester resin Approv al to Lloy ds register of shipping Product Properties:
net 9,16
8,98
34,90
6,84
29,33
5,75
59,50
5,83
50,00
4,90
149,00
4,87
125,21
4,09
219,50
4,30
184,45
3,62
721,85
3,21
Mixing Ratios (by weight or v olume) Mixed Viscosity Working Time (pot lif e) Demouldable after Full Cure Working Temperature (recommended) Following lay ers without grinding within
100 parts resin / 1-3 parts hardener Low v iscosity 15 - 20 min 24 h 2 days 15 - 25C 1 day (at20C) (at 20C) (at 20C) (at 20C)
Product Specifications Viscosity Resin (at 25C) 500 - 600 mPa * s DIN 53015
C MPa % MPa kJ/m MPa Barcol B C ISO 527 ISO 527 ISO 178 ISO 179 ISO 527 ASTM D2583 ISO R 75
88
www.hp-textiles.com
E-Mail: info@hp-textiles.com
LSE Laminating Resin System, w ax-free ISO/NPG Basis The LSE polyester laminating system HP-P21LS is an unfilled, low-viscosity combination of resin and hardener with high chemical resistance and better heat stability. Article: HP-P21LS
Working time: Price (): (incl. hardener) 1 Kg resin/ 20ml har dener
Basic price/Kg
Features & Benefits: Unsaturated high quality poly ester resin, based in ISO/NPG Orthophtalic-based, pre-accelerated, high thixotropic index Wax free, tacky for further bonds / lay ers Good mechanical properties Excellent wet-out of fibre glass, carbon and aramid f ibres Applicable for hand lay -up, spray and for general reinf orced plastics Laminating tanks, containers, f loating equipments, pools, ponds, modelmaking, car industry... LSE ( Low Styrene Emission) polyester resin High water / chemical resistance and better heat stability
net 9,66
9,47
36,90
7,24
31,01
6,08
69,90
6,85
58,74
5,76
179,50
5,87
150,84
4,93
275,00
5,39
231,09
4,53
Product Properties: Mixing Ratios (by weight or v olume) Mixed Viscosity Working Time (pot lif e) Demouldable after Full Cure Working Temperature (recommended) Following lay ers without grinding within Product Specifications: Viscosity Resin (at 25C) 600 - 800 mPa * s DIN 53015 100 parts resin / 1-3 parts hardener Low v iscosity 15 - 20 min 24 h 2 days 15 - 25C 7 days (at 20C) (at 20C) (at 20C) (at 20C)
Data of Unreinforced Resin: Tensile strength Elongation at break Flexural strength Impact resistance E-Modulus Hardness Heat distortion temperature 80 3,5 110 10 3500 45 >90 MPa % MPa kJ/m MPa Barcol B C ISO 527 ISO 527
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
89
ISO 178
Laminate Polyester Resin - w axed for top or finish uses / ISO/NPG Basis The LSE polyester laminating system HP-P21LSP is an unfilled, low-viscosity combination of resin and hardener. Article: HP-P21LSP
Working time: Price (): (incl. hardener) 1 Kg resin/ 20ml har dener
Basic price/Kg
Features & Benefits: Unsaturated high quality poly ester resin, based in ISO/NPG Orthophtalic-based, pre-accelerated, high thixotropic index Waxed f or top or finish uses Good mechanical properties Excellent wet-out of fibre glass, carbon and aramid f ibres Applicable for hand lay -up, spray and for general reinf orced plastics Laminating tanks, containers, f loating equipments, pools, ponds, modelmaking, car industry... LSE ( Low Styrene Emission) polyester resin High water / chemical resistance High heat resistance
net 9,66
9,47
36,90
7,24
31,01
6,08
69,90
6,85
58,74
5,76
179,50
5,87
150,84
4,93
275,00
5,39
231,09
4,53
* Shipping in steel bucket or steel drum Product Properties: Mixing Ratios (by weight or v olume) Mixed Viscosity Working Time (pot lif e) Demouldable after Full Cure Working Temperature (recommended) Following lay ers without grinding within 100 parts resin / 1-3 parts hardener low v iscosity 15 - 20 min 24 h 2 days 15 - 25C 1 day (at 20C) (at 20C) (at20C) (at 20C)
Product Specifications Viscosity Resin (at 25C) 600 - 800 mPa * s DIN 53015
Data of Unreinforced Resin: Tensile strength Elongation at break 80 3,5 110 10 3500 45 >90 MPa % MPa kJ/m MPa Barcol B C ISO 527 ISO 527 ISO 178 ISO 179 ISO 527 ASTM D2583 ISO R 75
90
www.hp-textiles.com
E-Mail: info@hp-textiles.com
net 39,50
7,90
Cobalt pre-accelerated Slightly higher elasticity ( semi-f lexible and therefore less damage on the laminate) High UV stability, excellent weather resistance Salient Heat resistance > 80C
*20 Kg resin
Basic price/Kg
136,80
6,84
115,00
5,75
Processing Data: Mixing Ratios (weight or v olume) Viscosity Working time Demouldable 100 parts resin / 2 parts hardener Thixotropic (High viscosity f or manual application) 15 - 20 min 24 h 48 h 20C (at 20C) (at 20C) (at 20C)
52,95
10,59
44,50
8,90
Basic price/Kg
*20 Kg resin
Basic price/Kg
159,00
7,95
133,61
6,68
net 49,50
9,90
12 h 7 day s
5 Kg resin
*20 Kg resin
Basic price/Kg
213,00
10,65
179,00
8,95
Incl.VAT 47,00
9,40
*20 Kg resin
Basic price/Kg
136,80
6,84
Incl.VAT 47,00
9,40
net 39,50
7,90
*Deliv ery time f or 20kg upon request you will find the suitable hardener on page 92
*20 Kg resin
Basic price/Kg
136,80
6,84
115,00
5,75
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
91
7,90
Features and Fields of application: High-quality, unsaturated poly ester gelcoat ISO/NPG Thixotropic, tacky curing (wax free)
Incl.VAT 47,00
9,40
net 39,50
7,90
Cobalt pre-accelerated Slightly higher elasticity (semi-flexible and theref ore less damage on the laminate). High UV stability, excellent weather resistance for use in swimming pools / pond constructions and in boat building Viscosity set f or manual application Processing data: Mixing Ratio (weight or v olume) Mixed v iscosity 100 parts resin / 2 parts hardener Thixotropic (high v iscosity f or hand application) 15 - 20 min 24 h 48 h 20C (at 20C) (at 20C) (at 20C)
*20 Kg resin
Basic price/Kg
136,80
6,84
115,00
5,75
** this variation can also be dyed with our colour pigments, you will find it on the page 83.
Incl.VAT 47,00
9,40
*20 Kg Resin
Basis price/kg
136,80
6,84
115,00
5,75
Working Temperature (min / max) 18 - 25C Recoat within Fully cured after 24 h 7 day s (at 20C) (at 20C)
M EKP - HA RD EN E R
Article: HP-MEKP
MEKP hardener suitable for polyester resin Dosage: 2% Price (): 100 g hardener
Basic price/Kg
Features and Fields of application: Can be used f or the pre-accelerated poly ester resins of the series HP-P21. Other resins may require preliminary Made for laminating resins gel / topcoats with accelerator. 4,70
47,00
Incl.VAT
net 3,95
39,50
Suitable for: hand lay up, spray up, spinning, infusion and f ilament winding. Processing data: Chemical nature Colour Mixing Ratio Working Temperature Dosage: methy l ethyl ketone peroxide transparent As recommended by the respective system 15 - 25C Approx. 2% (by weight:)
200 g hardener
Basic price/Kg
5,90
29,50
5,09
25,45
600 g hardener *
Basic price/Kg
9,89
16,48
8,31
13,85
1 Kg hardener *
Basic price/Kg
15,90
15,90
13,36
13,36
5 Kg hardener *
Basic price/Kg
45,10
9,02
37,90
7,58
*This product must be sent by carrier agencie. Because it is a hazardous good. Please contact us for more information about transport costs for this item. Tel.: +49 (0) 5905-9459870 www.hp-textiles.com E-Mail: info@hp-textiles.com
92
Casting System - high transparent The Poly ester-System HP-P30GB is an unfilled, low-v iscosity combination of resin and hardener with working time (pot lif e) of approx. 30 minutes.** Usable for water-clear casting up to 50mm thickness / 5kg per working step**.
Article: HP-P30GB
based Working time: Price (): (Incl. hardener) 1 Kg resin / 20ml hardener
Basic price/Kg
Features & Benefits: high transparent / water clear low viscous, medium reactiv e, light stabilised orthophthalic poly ester-resin pre-accelerated, wax-f ree, unsuspectible to cracking cold-hardening, demouldable at room-temperature for water-clear casting up to 50mm thickness / 5kg per working step** applicable for high-transparent castings
net 13,40
13,14
59,90
11,75
50,34
9,87
91,90
9,01
77,23
7,57
249,90
8,17
210,00
6,86
Product Properties: Colouring Mixing ratios (by weight) up to 100g Mixing ratios (by weight) < 500g Mixing ratios (by weight) > 500g Mixed v iscosity Working time (pot lif e) Demouldable after** Full cure Working temperature high-transparent / water-clear 100 parts resin / 2 parts hardener 100 parts resin / 1 parts hardener 100 parts resin / 0,5 parts hardener low-v iscous 30 min 1-2h 24 h 18 - 25C (details below) (100g at 20C) (at 20C) (at 20C)
Product Specifications: Viscosity Resin (at 23C) 700 cps DIN 16945
Data of unreinforced resin: Density Hardness (Shore D) Flexural strength Impact strength Heat distortion temperature ISO 75A Schrinkage after curing Colour (mixed)
** Depends on geometry and total amount of c asting.
1,2 86 90 8 70 7
g/cm
DIN 53479
N/mm kJ/m C %
high-transparent / colourless
Specifications after curing 7d at 20C.
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
93
In-Mould-Coating
Advantages: In addition to the huge time saving and cost reduction in general and the quality of the finished part is higher, as the paint prov ides better adhesion to the component, as in separate painting. Also a separate paint with occuring effects such as the orange peel can be prevented by using in-mold coating. Cost reduction on the basis of saving of time An excellent adhesion between varnish and component Even after weeks it can be over laminated again
Colour overview:
In Mould Coating
Working time: 30 min. Standard colours: Price(): Incl.VAT (incl. hardener) 750 ml
Basic price/ltr
net 40,60
27,07
23,90
31,87
28,95
38,60
48,31
32,21
1500 ml
Basic price/ltr
43,90
29,27
36,89
24,60
1500 ml
Basic price/ltr
51,96
34,64
43,66
29,11
Basic price/ltr
7500 ml
177,31
23,64
149,00
19,87
Basic price/ltr
7500 ml
169,50
22,60
142,44
18,99
Basic price/ltr
7500 ml
189,95
25,33
159,62
21,28
Article
Colour
Article
Colour
HP-IMC-0000 RAL 0000 transparent (carbon design parts) HP-IMC-1021 RAL 1021 rape y ellow HP-IMC-2004 RAL 2004 pure orange HP-IMC-3000 RAL 3000 flame red HP-IMC-5002 RAL 5002 ultramarin blue HP-IMC-9003 RAL 9003 signal white HP-IMC-9004 RAL 9004 signal black
HP-IMC-1026* RAL 1026 luminous yellow HP-IMC-2005* RAL 2005 luminous or ange HP-IMC-3024* RAL 3024 luminous red HP-IMCRAL luminous green
94
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Important advice: Unsuitable f or applications under water! No adhesion on PE, PP, PTFE, ... Spray Viscosity (flow cup DIN 4): 17 - 18 sec. (4mm DIN at 20C)
Drying times at 20C Dust-free Non-sticky Complete dry ing process 20 - 30 minutes 4-5 48 hours hours
Colour overview:
HP-PUR
Working time: ca. 3 hours Standard colours: Price(): Incl.VAT (incl. hardener) 625 ml
Basic price/ltr Basic price/ltr
net 36,05
28,84
22,49
35,99
Basic price/ltr
Basic price/ltr
1250 ml 6250 ml
38,90
31,12
32,69
26,15
1250 ml
Basic price/ltr
42,90
34,32
36,05
28,84
Basic price/ltr
154,90
24,78
130,17
20,83
Basic price/ltr
149,90
23,98
125,97
20,16
Basic price/ltr
6250 ml
161,95
25,91
136,09
21,77
Article
HP-IMC-0000 HP-IMC-1021 HP-IMC-2004 HP-IMC-3000 HP-IMC-5002 HP-IMC-9003 HP-IMC-9004
Colour
RAL 0000 transparent (carbon design parts) RAL 1021 rape y ellow RAL 2004 pure orange RAL 3000 flame red RAL 5002 ultramarin blue RAL 9003 signal white RAL 9004 signal black
Article
Colour
HP-IMC-1026* RAL 1026 luminous yellow HP-IMC-2005* RAL 2005 luminous or ange HP-IMC-3024* RAL 3024 luminous red HP-IMCRAL luminous green
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
95
M O UL D REL EA S E A G E NT S
Mould release agents are very important for the composite industries. They are used to facilitate the removal of molded or cast parts from the moulds. Release agents have often a significant effect on the surface of the finished product. Table guidance for choosing the right mould release agent system.
SUITABL E FOR
APPLICATION WIT H
Poly urethanes cloth (sof t) sponge (f ine-pored) spray gun
Products
Epoxy resins
Poly esterresins
Viny lesterresins
HP- BM17
wax dispersion, liquid
++
++
HP- G
primi ng wax, viscous
HP-PVA
release film, liquid
++
++
++
++
++
++
HP-CX7
carnauba-wax, pasty
++
++
++
++
HP- HGR5
water based, liquid
++
++
++
++
++
++
= applicable
= conditionally applicable
= not provided
Article: BM17
Incl.VAT 5,90
29,50
net 4,96
24,79
Characteristics and application: HP-BM17 has to be applied sparingly with a soft cotton cloth (rotary motions). After a short drying time (approx.15 minutes) the surf ace can be polished with a dry and clean cotton cloth to high gloss. The mould is supposed to have an ev enly gloss f ree f rom any streaks. Prior to the first mould release, new moulds are preprocessed with three or f iv e coatings of BM 17. Ev ery coating is supposed or be applied by using a different method, e.g.: from abov e to the bottom, from the left to the right, rotary. After the mould release agent had been allowed to ev aporate f or several hours (over night is the best), the material should be polished again intensively.
500 ml
Basic price/ltr
8,90
17,80
7,48
14,96
1000 ml
Basic price/ltr
14,90
14,90
12,52
12,52
5000 ml
Basic price/ltr
39,00
7,80
32,77
6,55
96
www.hp-textiles.com
E-Mail: info@hp-textiles.com
CONSUMPTION
g/m
DRY TIM E
minutes at 20C
Applicable on s mooth, non-porous surfac es. Usable as pri mer for PVA. Residues can be cleaned with white s pirit or thinner XB. NO single rel eas e agent ! Primer for PVA. Residues can be cleaned with white s pirit or thinner XB. Generates very safe rel ease fil m . Prim i ng with HP-G (or HP-BM17 or HP-CX7) is nec essary. Residues can be cleaned with water. Polish in s everal l ayers. High-gloss release agent. Usable as pri mer for PVA. Residues can be cleaned with white s pirit or thinner XB. Water bas ed 100% free of solv ents! Very good releas e effec t with PUR (IMC). Residues can be cleaned with water.
TEMPERATURES
POLISHABILITY FEAT URES / SUBSTRAT E
APPLICATION min. (recommended) max. loadability
30
15
15 C
80C
30
5 - 15
15 C
100C
60
5 - 10
15 C
100C
15 - 20
10 - 15
++
20 C
80C
20 - 25
5 - 15
++
15 C
150C
C = in combination
Article: HP-G
Priming Wax
Price(/pcs): 200 ml
Incl.VAT 5,90
29,50
net 4,96
24,79
Application area: - silicon release agent - coating for PVA release agents in GRP moulds Application: Do not polish, the coating wax film will be destroyed. The surf ace is matt after the drying period
500 ml
8,90
17,80
7,48
14,96
1000 ml
Basic price/ltr
14,90
14,90
12,52
12,52
5000 ml
Basic price/ltr
39,00
7,80
32,77
6,55
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
97
Price(/pcs): 200 ml
Basic price/ltr
Incl.VAT 6,50
32,50
net 5,46
27,31
Characteristics and application: - watery -alcoholic lotion of polyvenyalcohol - f orms coatings similar to f oils - high selectivity can be used f or non-priming surfaces - dry ing time 5-10min At f irst, you have to prime the ground with a coating of wax. After that, the pv a-film release is applied with a film release-sponge or a soft brush. In order to achiev e an even surf ace, the coating has to be carried out ev enly and f ree from any streaks. By using a colouring, the ev enly coating can be controlled especially well. After approx. 5-10 minutes the film release f orms a dry and glossy f ilm.
500 ml
Basic price/ltr
9,79
19,58
8,23
16,46
1000 ml
Basic price/ltr
15,90
15,90
13,36
13,36
5000 ml
Basic price/ltr
45,10
9,02
37,90
7,58
Article: HP-CX7
- Carnauba wax Price(/pcs): from 1 can 425 g
Basic price/kg.
Wax-Paste
Incl.VAT 16,90
39,76
net 14,20
33,41
Characteristics and application: HP-CX7 Carnauba wax based release agent f or high gloss f inished surf aces - wax release agent for brilliant high gloss finish in moulds with smooth, non porous surfaces - suitable for most composites mould applications with solvent f ree epoxy and poly ester resins - primer f or f ilm release agent HP-PVA - high-gloss release agent for working with In-Mould Coating HP-IMC (HP-Textiles)
14,90
35,06
12,52
29,46
13,69
32,21
11,50
27,06
- water based release agent for applications with In-Mould Coatings (HP-IMC) from HP-Textiles - also suitable for solv ent free epoxy resins, unsaturated poly ester resin and viny l ester resins - f ast dry ing time (per lay er <5 minutes at 20C) - semipermanent, external release agent with good demoulding features - colourless, solv ent-f ree - application with spray gun (ready f or spraying), lint-free cloth or soft brush possible - can be polished after short dry time - multiple demoulding processes are possible - minimises remains on the mouldssurf aceand at the same time no trans mission to the component - free of silicones or PTFE
250 ml 500 ml
10,90
43,60
9,16
36,64
18,90
37,80
15,88
31,76
Basic price/ltr
1000 ml
Basic price/ltr
31,90
31,90
26,81
26,81
5000 ml
Basic price/ltr
139,00
278,00
116,81
233,62
98
www.hp-textiles.com
E-Mail: info@hp-textiles.com
C L EA NS E R
Article: HP-AC Acetone Boiling point
56C net 4,96
4,96
Melting point:
-95C
Incl.VAT 5,90
5,90
5 ltr. Can
Basic price/ltr
17,90
3,58
15,04
3,01
10 ltr. Can
Basic price/ltr
31,90
3,19
26,81
2,68
Description: Acetone is an uncoloured, aromatic smelling f luid. It is completely mixable with water. The substance is very v olatile. Application: Aceton is used as solv ent in colours, v arnish and as a chemical intermediate. Paintbrushes, laminate roller, v entilation roller and other tools can be cleaned with aceton f rom noncured poly ester and epoxy resin.
Article: HP-XB
XB-Thinner
Degreasing agent for cleaning applications / passive thinning agent for EP-Systems
Price(/pcs.): 1 ltr. Can Incl.VAT 6,90
6,90
net 5,80
5,80
5 ltr. Can
18,90
3,78
15,88
3,176
Application: - spraythinner for coating systems - thinner for EP-undercoat - mould cleaner - degreasing agent for cleaning applications - paint brush- and equipment cleaner
Article: HP-IMC-X
Thinner
HP-IMC-X is a thinner on the basis of xylene for our In-Mould-Coating or other polyurethane coatings.
Price(/pcs): 1 ltr. Can
Basic price/ltr
Incl.VAT 6,90
6,90
net 5,80
5,80
5 ltr. Can
Basic price/ltr
18,90
3,78
15,88
3,176
Description/Application: The thinner is to achieve the ideal consistency in the blended PU given system. Dosage max. 5% (by weight)
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
99
Cleanser / Thinner
Description: The XB- Thinner can be filled in the ready mixed epoxy resin system, till the desired consistence is achieved. Low v iscosity resin systems can be made spray able with the addition of XB-Thinner.
F I L L ER S / P I GM EN T
System Degasser Prevents foam and bubbles Article: HP-BEL51
Dosage: 0,2 - 0,8% Price (): 5ml Incl.VAT 2,25
4,50
net 1,89
3,78
Basic price/10ml.
Basic price//10ml.
20ml
3,45
1,73
2,90
1,45
Basic price//10ml.
100ml
6,95
0,695
5,84
0,584
To add in poly ester and epoxy resin, in order to prevent either f rom any foam f ormation and bubbling during the application. HP-BEL51 is mixed into the resin before other additiv es are added. To empty the HP-BEL51 into the completed system is possible too. For a good dosage y ou can use the enclosed plastic pipette. Drop size is approx. 0,02g.
Chopped Glass Fibre Chopped glass fibre 6mm (chopped E-Glas fibre with silane) Article: HP-GS6
Dosage: up to 10% depending on desired strenght Price (): 250g Incl.VAT 3,90
15,60
net 3,28
13,12
Deliv ery in Plastic bucket Plastic bucket Plastic bucket Plastic bucket Plastic bucket Plastic bucket Bag
Basic price/Kg
To add in poly ester and epoxy resin, to increase the strength of the mould parts and the mixture is still able to f low. Chopped glass fibre can be added alone or with cotton flocks. With chopped glass f ibre reinf orced resins hav e a high tensile-, bending and pressure strength. Suitable f or epoxy and poly ester resin. Fields of application: Fibre masses and press masses, plastics, glue, corrosion protector coating and asbest alternativ e. f iber length: 6mm f inish/sizing: Silane ty pe of glass E-Glass v olume: approx. 2,5g/m bulk Weight: > 350 - 400g/l dosage: up to 10%
Basic price/Kg
500g
5,30
10,60
4,45
8,90
Basic price/Kg
1 Kg
7,60
7,60
6,39
6,39
Basic price/Kg
2,5 Kg 5 Kg
14,90
5,96
12,52
5,01
22,90
4,58
19,24
3,85
Basic price/Kg
10 Kg
Basic price/Kg
37,90
3,79
31,85
3,19
20 Kg
Basic price/Kg
59,90
3,00
50,34
2,52
Fillers / Pigment
100
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Incl.VAT 2,90
29,00
net 2,44
24,00
Deliv ery in Plastic bucket Plastic bucket Plastic bucket Plastic bucket Plastic bucket Plastic bucket Bag
250g 500g
5,90
23,60
4,96
19,84
Cotton f locks are used as a filler to thicken epoxy resins or to promote adhesion between laminate layers. It offers dimensional stability and enhance compound strength. It is also used for patching and repairing surf aces. This f iller is best suited in areas that will not be submerged or in constant contact with water.
8,50
17,00
7,14
14,28
Basic price/Kg
Basic price/Kg
1 Kg 2 Kg
13,90
13,90
11,68
11,68
Suitable f or epoxy and poly ester resin. Application area: Mould parts, design of models, sailplanes, automobil building, sandwich building, bonding and f or boat building etc. Dosage up to 30%, depending on the consistence to be achiev ed. Bulk weight: Fibre length: Fibre thickness: 70 - 90g/ltr. 200 - 400m 10 - 20m
19,90
9,95
16,72
8,36
Basic price/Kg
6 Kg
Basic price/Kg
36,90
6,15
31,01
5,17
20 Kg
Basic price/Kg
107,10
5,35
90,00
4,50
Microballoons Microballoons < 0,2 mm (filler for synthetic resin systems) Article: HP-MB2
Dosage: up to 30% Price (): 100g
Basic price/Kg
Incl.VAT 3,90
39,00
net 3,28
32,80
250g
Basic price/Kg Basic price/Kg
6,50
26,00
5,46
21,84
Microballoons are white, very f ine and light glass hollow balls f or epoxy and poly ester resin systems. With the mixture in the system can compression proof and simple grindable f iller paste be produced. Add-on till 30 % in relation of the desired consistence and strength. Suitable f or epoxy and poly ester resin. Fields of application: - production of compression proof mould compounds - production of light filler paste compounds Bulk weight: 140 - 150 g/l Specific density: 0,26 g/cm Particle size distribution:50 m Max. particle Sizing: 200 m Melting point: > 1200C
500g
9,30
18,60
7,82
15,64
1 Kg
Basic price/Kg
14,90
14,90
2 Kg
Basic price/Kg
25,90
12,95
5 Kg
Basic price/Kg
49,90
9,98
10 Kg
Basic price/Kg
89,90
8,99
75,55
7,56
Bag
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
101
Fillers / Pigment
Thixotropypow der Filler for synthetic resin system to increase the viscosity Article: HP-TH23
Dosage: up to 15% Price (): 200g
Basic price/Kg
Incl.VAT 4,30
21,50
net 3,61
18,05
Thixotropy powder HP-TH23 can be stirred intensively in the mixed sy nthetic resin system until the desired consistence is achieved. Suitable f or epoxy and poly ester system.
500g
Basic price/Kg
9,30
18,60
7,82
15,64
Plastic bucket Fields of application: Plastic bucket Plastic bucket Plastic bucket Filler to produce Gelcoat/Topcoat. Prev ents the run down on downward surf aces. The outcome of this is an impact and a high UVresistent upper f ace dosage till 15%. bulk Weight: 190 - 200g/l
Basic price/Kg
1 Kg 2 Kg
13,95
13,95
11,72
11,72
24,90
12,45
20,92
10,46
Basic price/Kg
6 Kg
Basic price/Kg
60,90
10,15
51,18
8,53
Thixotropypow der HP-PK22 is applied as a thickening and thixotropic agent in many organic systems.
Article: HP-PK22
Dosage: 0,5 - 5% Price (): 1 ltr.
Basic price / ltr
Incl.VAT 4,64
4,64
net 3,90
3,90
Thixotropy powder HP-PK22 can be stirred intensiv ely in the mixed sy nthetic resin system until the desired consistence is achieved.
Suitable f or epoxy and poly ester system. Plastic bucket Plastic bucket Plastic bucket Plastic bucket Paper bag Fields of application: HP-PK22 is applied as a thickening and thixotropic agent in many organic systems, e. g. in unsaturated polyesters resins, coatings, adhesiv es cosmetics and others. Prev ent the run down on downward surfaces. Amorphous pyrogenic silica. White colloidal powder of high purity. Density at 20C: Tamped density: Dosage: approx. 2,2g/cm approx. 40g/ltr. 0.5 - 5% (weight)
2,5 ltr.
Basic price / ltr
8,91
3,56
7,49
2,99
5 ltr.
12,50
2,50
10,50
2,10
10 ltr.
Basic price / ltr
20,82
2,08
17,50
1,75
30 ltr.
Basic price / ltr
46,41
1,55
39,00
1,30
10 Kg
Basic price / ltr
148,75
0,595
125,00
0,50
Fillers / Pigment
102
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Colour Pigments Our colour pigments can be mixed with our resin systems (Epoxy, Polyester, Acryl) Article: HP-FD
Dosage: up to 20% Price (): 20g Incl.VAT 1,95
9,75
net 1,64
8,20
Basic price/100g
100g
Basic price/100g
5,95
5,95
5,00
5,00
Basic price/100g
500g
12,95
2,59
10,88
2,18
1 Kg
Basic price/100g
21,90
2,19
18,40
1,84
* terra di siena can affect the curing process of polyester resins in a negative way
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
103
Fillers / Pigment
D EG A S S E R RO L L ER
Degasser rollers are used for compressing and venting of the laminates.
Tools / Accessories
Paddle Roller
- Aluminium roller with screw f astening incl. holder and plastic grip. - Suitable for almost all resin systems and glass fabrics Article no: HP-PR-20x75 HP-PR-25x75 HP-PR-25x150 HP-PR-30x100 roller- 20mm 25mm 25mm 30mm roller width Price () 75mm 75mm 150mm 100mm net
High resistance to almost all cleanser The aluminium roller can be cleaned with burn off by cured resin and so the lif e time will be even longer Ergonomical f ormed plastic grip with adapter for an extension
Radius Roller
- Aluminium roller with screw f astening incl. holder and plastic grip - Especially recommended for low viscosity resin and thin glass f abrics Article no: HP-RR-13x75 HP-RR-25x75 HP-RR-25x150 HP-RR-50x75 HP-RR-50x150 roller- 13mm 25mm 25mm 50mm 50mm roller width Price () 75mm 75mm 150mm 75mm 150mm net
9,90 8,32 10,90 9,16 15,90 13,36 17,90 15,04 23,90 20,08
High resistance to almost all cleanser The aluminium roller can be cleaned with burn off by cured resin and so the lif e time will be even longer Ergonomical f ormed plastic grip with adapter for an extension
Ergonomical f ormed plastic grip with an adapter f or an extension A quick change of the roller is possible with the plug fixing of the holder Difficult to clean
104
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Nobby Roller
Article no:
roller-
HP-NR-25x75 25mm 75mm 14,90 HP-NR-25x100 25mm 100mm 16,90 HP-NR-25x150 25mm 150mm 19,90 HP-NR-25x200 25mm 200mm 24,90 High resistance to almost all cleansers
The aluminium roller can be cleaned with burn off by cured resin and so the lif e time will be even longer Ergonomical f ormed plastic grip with adapter for an extension
Radius Roller
- Aluminium roller with screw f astening incl. holder and plastic grip. - Recommended f or curved and round surf aces Article no: roller- roller width Price () net
HP-DR-13x50 13mm 50mm 11,90 10,00 HP-DR-25x75 25mm 75mm 16,90 14,20 High resistance to almost all cleansers The aluminium roller can be cleaned with burn off by cured resin and so the lif e time will be ev en longer
Corner Roller
- Aluminium roller with screw f astening incl. holder and plastic grip. - Recommended f or curved and round surf aces Article no: HP-CR-50x15 roller- 50mm roller width Price () 15mm net
11,90 10,00
High resistance to almost all cleansers The aluminium roller can be cleaned with burn off by cured resin and so the lif e time will be ev en longer Ergonomical f ormed plastic grip with adapter for an extension
Aerating Roller
- Recommended f or coatings of greater areas like pond or swimming pool. - Very good applicable f or thick matts and f abrics. Article no: HP-L1021 roller- 68mm roller width Price () 24cm 9,99 net 8,39
A clinched plastic roller incl. holder and plastic grip with adpater f or telescopic-extension rod (HP-L1024) High resistance to almost all cleansers Suitable for epoxy and polyester resin
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
105
Tools / Accessories
- Aluminium roller with screw f astening incl. holder and plastic grip. - Recommended f or thick matts and f abrics
L AM I NA T I NG RO L L ER S ET S / AC C ES S O RI ES
Laminating Sets
Tools / Accessories
Article: HP-L50
Roller paint + Tray Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 1,49 1,34 1,27 net 1,25 1,13 1,07
Article: HP-L300
Roller paint + Tray Price (/pcs): Incl.VAT from 1 piece from 5 pcs. 2,49 2,24 net 2,09 1,88
Consisting of: - 1 Plastic Tray 50ml - 1 Non-Slip-on handle 15cm - 1 Foam roller 5cm
from 10 pcs. 2,11 1,77 Consisting of: - 1 Plastic Tray 300ml - 1 Non-Slip-on handles 27cm - 2 Foam roller 10cm
Article: HP-L1001
10 pcs. laminating set Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 5,79 5,21 4,92 net 4,87 4,38 4,14 - 1 Universal brush 10mm - 1 Plastic stirr stick - 1 Plastic tray 300ml
Article: HP-L1002
6 pcs. Brush set with pot Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 3,79 3,41 3,22 net 3,18 2,87 2,71
Consisting of: - 2 Foam roller 11cm - 1 Non-Slip-on handle 29cm - 3 Flat brushe 25/35/50mm - 1 Round brush Gr. 2
Article: HP-L1003
10 pcs. brush set Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 2,98 2,68 2,53 net 2,50 2,25 2,13
Article: HP-L1004
10 pcs. Allroundset Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 6,79 6,11 5,77 net 5,71 5,14 4,85 - 1 Covering film 4 x 2,5m - 1 Plastic tray 300ml
Consisting of: - 3 Flat brushs 20/25/35mm - 3 Emaille paint brushes 0/1/2 - 2 Round brushes Size 2 + 4 - 2 Corner brushes 25/35mm
Consisting of: - 2 Foam roller 5 + 11cm - 2 Non-Slip-on handles 15 +29cm - 3 Flat brushes 25/35/50mm
Article: HP-L1011
Foam roller 11cm Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 0,79 0,71 0,67 net 0,66 0,60 0,56
Description: - Replacement rolls 5cm - Super f ine structure - Outer diameter 35mm Tel.: +49 (0) 5905-9459870
Description: - Replacement rolls 11cm - Super f ine structure - Outer diameter 35mm
106
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Article: HP-L1016
Polyamide roller 10cm Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 1,79 1,61 1,52 net 1,50 1,35 1,28
Article: HP-L1017
Polyamide roller 15cm Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 2,19 1,97 1,86 net 1,84 1,66 1,56
Description: - Poly amide roller 10cm - Particularly hard-wearing - Outer diameter 35mm
Description: - Poly amide roller 15cm - Particularly hard-wearing - Outer diameter 35mm
Article: HP-L1015
Velours roller 10cm Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 0,98 0,88 0,83 net 0,82 0,74 0,70
Article: HP-L1018
Flocked foam roller 11cm Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 1,79 1,61 1,52 net 1,50 1,35 1,28
Description: - Foam roll - Flocked 11cm - For a v ery fine surf ace finish
Article: HP-L1071
Laminating brush 2cm Price (/pcs): Incl.VAT from 1 piece from 12 pcs. from 36 pcs. 0,82 0,70 0,58 net 0,69 0,59 0,49
Article: HP-L1019
Wall brush 14cm Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 5,90 5,31 5,02 net 4,96 4,46 4,22
Description: - Flat brush just 20mm - Black China brislte - Brass - clamp - Length: approx. 34cm - Thick: approx. 8mm
Beschreibung: - Foam roll - Flocked 14 cm - For a v ery fine surf ace finish
Article: HP-L1040
Polyester Paint roller 15cm Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 3,95 3,55 3,36 net 3,32 2,98 2,82 - Poly ester paint roller - D= 40mm - Width 15cm
Article: HP-L1030
Plug bracket 6mm Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 1,18 1,06 1,00 net 0,99 0,89 0,84
Description: - Ideal for coating. Particularly suitable for fine surf ace finish. - TOP Quality!
Description: - Non-Slip-on handle 6mm - f or small roller 10 - 16mm Suitable with our: HP-L1010, HP-L1011, HP-L1016, HP-L1017, HP-L1015, HP-L1018
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
107
Tools / Accessories
Article: HP-L1026
Polyamide roller 25cm
Article: HP-L1022
Replacement roller 25cm net 5,03 4,53 4,28 Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 4,99 4,49 4,24 net 4,19 3,77 3,56
Tools / Accessories
Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 5,99 5,39 5,09
Consisting of: Poly amid roll 25cm width inclusiv e non-slip-on handle with adaptor f or telescopic extensions (HP-L1024). Well recommended f or works in ponds and swimming pools. Suitable f or epoxy and poly ester resin.
Consisting of: - Poly amide roll 25cm - Very durable - Suitable for HP-L1026
Article: HP-L51
Plastic resin tray 50ml Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 0,49 0,44 0,42 net 0,41 0,37 0,35
Article: HP-L301
Plastic resin tray 300ml Price (/pcs): Incl.VAT from 1 piece from 5 pcs. from 10 pcs. 0,99 0,89 0,84 net 0,83 0,75 0,71
Disposable nitril gloves Nitril glov es prov ide the optimal protection against chemicals like epoxy resin. They must be preferred over latex or viny l glov es makes that prov ide only short term protection. Article-no: HP-L1080 HP-L1081 HP-L1082 HP-L1085 HP-L1086 HP-L1087 HP-L1090 HP-L1091 HP-L1092 HP-L1095 HP-L1096 HP-L1097 Size L / powder free L / powder free L / powder free XL / powder f ree XL / powder f ree XL / powder f ree L / with powder L / with powder L / with powder XL / with powder XL / with powder XL / with powder quantity 100 pcs. 20 pcs. 10 pcs. 100 pcs. 20 pcs. 10 pcs. 100 pcs. 20 pcs. 10 pcs. 100 pcs. 20 pcs. 10 pcs. Package price 10,59 4,64 2,98 10,59 4,64 2,98 10,59 4,64 2,98 10,59 4,64 2,98 net 8,90 3,90 2,50 8,90 3,90 2,50 8,90 3,90 2,50 8,90 3,90 2,50 Basic price / pc Basic price / pc. incl.VAT net
0,11 0,23 0,30 0,11 0,23 0,30 0,11 0,23 0,30 0,11 0,23 0,30 0,09 0,19 0,25 0,09 0,19 0,25 0,09 0,19 0,25 0,09 0,19 0,25
108
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Mixing cup 250ml / 1pack = 80 pcs Price (/pack): Incl.VAT from 1 pack
Basic price / cup Basic price / cup
Mixing cup 500ml / 1pack = 50 pcs Price (/pack): Incl.VAT from 1 pack 8,95
0,18
net 7,52
0,09
net 7,52
0,15
8,95
0,11
from 5 pack
7,16
0,09
6,02
0,075
- PP-Natur - round - suitable f or epoxy and poly ester resin - Volume: 250ml und 500ml - 250ml = 80 pieces / pack - 500ml = 50 pieces / pack
from 5 pack
Basic price / cup
7,16
0,14
6,02
0,12
from 10 pack
Basic price / cup
6,27
0,08
5,27
0,067
from 10 pack
Basic price / cup
6,27
0,13
5,27
0,11
Article: HP-L1046
Plastic bucket 5,7 ltr. Price (pcs): from 1 piece from 5 pcs. from 10 pcs. from 25 pcs. Incl.VAT 2,32 2,09 1,97 1,74 net 1,95 1,76 1,66 1,46 PP-Natur round with metal hanger / plastic lid Suitable for epoxy and polyester resin
Article: HP-L1048
Plastic bucket 10,8 ltr. Price (pcs): from 1 piece from 5 pcs. from 10 pcs. from 25 pcs. Incl.VAT 3,50 3,15 2,97 2,62 net 2,94 2,65 2,50 2,20
Article: HP-L1061
Spatula / 1 pack = 100 pieces Price (/pcs): from 1 pack
Basic price/Spatula
Article: HP-L1054
Scissors, stainless steel Price (/pcs): from 1 piece from 3 pcs. from 5 pcs. Incl.VAT 6,90 6,21 5,87 net 5,80 5,22 4,93
Incl.VAT 4,70
0,047
net 3,95
0,039
from 3 pack
Basic price/spatula
4,23
0,042
3,55
0,035
Basic price/Spatula
from 5 pack
3,76
0,038
3,16
0,032
Description: - Spatula / Wood spatula - Length: 180mm - Width: 18mm - 100 pieces / Pack
Description: - Scissors Optima - stainless steel - Suitable to cut, glass f abric, carbon f abric, matts, Poly ester non-wov en absorber. - (Not suitable for Aramid fabric) - Length: 12 / 29cm
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
109
Tools / Accessories
Article: HP-L1063
Article: HP-L1064
Article: HP-L1050
Plastic bucket 14 ltr. with measure
Article: HP-L1051
Stirrer with metal propeller Price (/pcs): from 1 piece from 5 pcs. from 10 pcs. Incl.VAT 2,49 2,24 2,12 net 2,09 1,88 1,78
Tools / Accessories
Price (/pcs): from 1 piece from 5 pcs. from 10 pcs. from 20 pcs.
Description: - Plastic bucket with liter scale - Suitable for epoxy and polyester resin - Made f rom a very resistable material
Description: - For a max. mixing of approx. 15 Kg. - Apapter for a drill machine - Easy cleaning with aceton - Measure: 85 x 400mm
Article: HP-L1024
Telescope extension 200cm Price (/pcs): from 1 piece from 5 pcs. from 10 pcs. Incl.VAT 9,99 7,99 5,99 net 8,39 6,71 5,03
Description: - Aluminium telescope extension pole 200cm length - Good grip and adjustable till 200cm - Suitable for our HP-L1021 and poly amide roller HP-L1026 - Recommended f or a large coating area in pond and swimming pool construction.
Article: HP-L1057 Plastic valve DN 45 Price (/piece): Incl. VAT 1 piece 3,99 net 3,35
Please use our decision table to find the correct valve Article
HP-E80FS HP-E30FB HP-E25D, HP-E25DM HP-E40D
Quantity
4kg / 12,8kg 48kg 33kg 4kg / 12,8kg 48kg 3kg / 7,5kg 37,5kg 7,5kg / 15kg 45kg 4kg / 12,8kg 48kg 10,2kg 61,2kg 2,8kg 7kg 42kg 3,25kg
Description: - DN 45 plastic valv e f or canister Article: HP-L1059 Plastic valve DN 55 Price (/piece): Incl. VAT 1 piece 4,99 net
4,19
HP-E3000W S HP-E28L, HP-E29L, HP-E55L, HP-E56L, HP-E110L , HP-E111L Series HP-E3000RI, Series HP-E3000GL
Description: - DN 55 plastic valv e f or canister Article: HP-L1058 Plastic valve DN 60 Price (/piece): Incl. VAT 1 piece 4,99 net 4,19
10,4kg 39kg
HP-E300GB HP-E45GA
110
www.hp-textiles.com
E-Mail: info@hp-textiles.com
C O M PL ET E S ET S
These sets have been specially put togehter to get a first introduction and handling with composite materials. Work instructions can be found on our website www.hp-textiles.com
Carbon Coating - Complete Set With this set you are able to refine a component and it thereby gets an unique look. In this set is enough material for small to medium sized coatings. Article: HP-KS-CB
Price (/set): 1 Set Incl.VAT 74,90 /set net 62,94 /set The set consists of the following products: Qty 800g 1m 1m 1x 1x 3x 5 Pair 5x 5x 1x Designated Epoxy resin coating / HP-E25DM Carbon f abric approx. 195g/m (Twill 2/2) Peel Ply fabric approx. 105g/m (Twill 2/2) Radius roller 10 pcs paint-/laquered Velours roller / HP-L1015 Nitrile gloves - size XL Mixing cups (plastic) Wood sticks f or mixing Instruction sheet
If you have any questions about this or any other product, please do not hesitate to contact us. Tel. : +49-5905-9459870 or via e-mail info@hp-textiles.com
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
111
Complete Sets
Fiberglass Repair Kit for boat building, automotiv e parts, fiberglass pools - ponds and much more Optimal for repairs of GRP and for beginners! With this GRP set you are able to make repairs, e.g. filing work of small holes, repairs of cracks or repairs of osmosis affected components. This set offers a wide range of materials for the processing with small to medium sized repairs. If you do not have any experience with GRP work yet, than this set would be the optimal start set for you!
Article: HP-KS-GFK01
Price (/set): 1 Set Incl.VAT 68,90 /set net 57,90 /set
The set consists of the following products: Qty 1x 1x 1x 1m 1m Designated HP-XB-1000 XB- Thinner HP-P144/050 Glass f ibre tape 144g/m 101meters HP-E45KL-1600 - Epoxy resin 1600g HP-T163E Glass f abric silane twill 163g/m HP-B320E Biax glass fabric 320g/m HP-T105P100 Peel Ply f abric twill 105g/m HP-L1001 laminating set 10pcs. HP-L1097 Disposable nitril glov es 5 pairs HP-L1064 500ml mixing cups 5pcs. HP-L1061 Wood spatula 10pcs. HP-L1015 Verlous roller 10cm 3pcs. HP-L1054 Satinless steel Scissors HP-BF1-0100 Cotton flocks 100g HP-PK22-1 Thixotropypowder 1liter Instruction sheet
Complete Sets
1m 1x 1x 1x 1x 1x 1x 1x 1x 1x
Moulding Set - Complete Set With this set you are able to create or a positive or negative model from a basic model. In this set is enough material for small to medium sized moulds. Article: HP-KS-FB
Price (/set): 1 Set Incl.VAT 68,90 /set net 57,90 /set The set consists of the following products: Qty 1100g 800g 1m 2m 200ml 200ml 100g 100g 1x 5 Pair 5x 5x 1x Designated Epoxy mould resin / HP-E30FB Epoxy laminating resin / HP-E45KL Glass fabric approx. 105g/m (Twill 2/2) Glass fabric approx. 320g/m +/-45 Priming wax Film release agent PVA Cotton f locks Chopped glass fibre 10 pcs paint-/lacquered Nitrile gloves size XL Mixing cups (plastic) Wood sticks f or mixing Instruction sheet
112
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Price:
Our prices depend on the latest v alid price list. All prices quoted in our catalogue are net wholesale prices and subject to VAT of 19%. The prices are not including Post & Package.
Terms of payment:
Payment in advance (bank transfer): After placing your order y ou will receive an e-mail, contening y our customer number, prof orma-inv oice, order number and the total amount of y our order also including our bank details. Please indicate this inf ormation on the payment when paying by bank transf er. Account holder: Account number: Sort code: HP-Textiles GmbH 624 1122 800 280 200 50 (Oldenburgische Landesbank AG)
For bank transf er f rom foreign countries: S.W.I.F.T.-Code: OLBO DE H2 IBAN DE23280200506241122800 The goods are dispachted within 24hours after receiving the payment. COD (Cash on delivery): Cash on deliv ery in Germany plus 7,90 COD f ee Cash on deliv ery for Belgium, Netherlands, Luxembourg, Austria, Czech Rep. and Hungary plus 18,50 COD f ee The goods are usually dispatched on the same day.
Direct Debit (Only available for German account holders): Paying my order by Direct Debit: After placing your order y ou will receive a f orm, which you will need to f ill out and return to us v ia e-mail or fax. In this f orm you will be asked to state your details such as invoice address, deliv ery address, date of birth and bank details (sort code and account number). After receiv ing this form back, we will proof y our status and inf orm you immediately about the status from y our order. The goods are dispachted within 24hours after receiving the direct debit form. Per PayPal: Pay Pal is designed to be a safer way to send money online. PayPal does not expose or sell customers financial inf ormation to merchants. Product features include information is automatically sent with a high level of data encry ption, to help saf eguard against identity theft, every Pay Pal payment is f ollowed by an email confirming transaction and online saf ety essentials that contains the identity protection guide to help for avoid identity theft. After your online order youll receiv e an additional e-mail conf irming your order incl. customer-number, prof orma-inv oicenumber and total amount. Please indicate this inf ormation on the Paypal payment.
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
113
Ordering Information
Extra shipping costs for bulky items and hazardous goods: Resin and hardener systems are treated as hazardous and some packaging units as bulky goods. These products are send especially per freight carrier only. For glass or carbon fabrics which are 100cm width or bigger than, the shipping cost is 9,70. Y ou will be informed in a separate email about the shipping cost, if this applies to your order. Island delivery: Deliv ery to island has normally a f ee of 14,50 per courier service. Hazardous goods will only be deliv ered by f reight carrier. Delivery per forward agency: Certain hazardous goods or very heavy rolls can only be dispatch by f reight carrier. Y ou can contact us per email or ev en calling and requesting the shipping cost to y our city or country. Otherwise, you will receiv e per email after the order a conf irmation with the shipping charges. The f reight by truck depends on the weight: and distance. There will alway s be charged the actual f reight charges.
Delivery time:
Please allow two working days for goods which are delivered within Germany and up to 6 working days f or f oreign countries. The goods are dispachted within 24hours after receiv ing the payment.
Ordering Information
Order today, delivery tomorrow: With Guaranteed 24 Serv ice it is possible to receive your goods on the next day. The goods will leav e our warehouse only after payment. Please note that the order must be made until 12 oclock and an 8,95 extra charge for this service. *Apllies from Monday s till Thursdays. Y ou can schedule y our deliv ery for 8:00, 9:00, 10:00 or 12:00 oclock on the next day. * Please note that this service does not cover whole Germany, please inform us y our Post Code (Zip Code) so we can check if the service is av ailable where y ou liv e. * Please contact us for the exact total price f or this serv ice.
For worldwide delivery: In case your country is not listed on the shipping list, please contact us regarding the shipping prices to your country. Tel: 0049 (0)5905 945 98 70 e-mail: inf o@hp-textiles.com
114
www.hp-textiles.com
E-Mail: info@hp-textiles.com
Country *Belgium Bulgaria *Denmark England Estonia Finland *France Greece Irland *Italy Latvia Lithuania *Luxembourg *Netherlands *Norway *Austria *Poland *Portugal Romania Sweden *Switzerland *Slovakia *Slovenia *Spain *Czech Rep. *Hungary
up to 5kg up to 15kg up to 30kg up to 50kg up to 75kg up to 100kg 10,00 13,36 18,40 24,37 39,41 48,74 on request 10,00 15,61 32,49 26,81 14,09 13,36 18,26 44,76 32,35 17,26 on request 26,81 19,54 32,49 32,49 10,00 10,00 26,81 10,00 19,54 32,49 26,81 19,54 32,35 25,79 44,76 44,76 13,36 13,36 32,35 13,36 25,79 44,76 32,35 25,79 on request 26,81 26,81 19,54 26,81 26,81 32,35 32,35 25,79 32,35 32,35 39,41 39,41 33,32 39,41 39,41 54,54 54,54 56,02 54,54 54,54 86,89 86,89 82,62 86,89 86,89 109,08 109,08 112,04 109,08 109,08 39,41 33,32 55,64 55,64 18,40 18,40 39,41 18,40 33,32 55,64 39,41 33,32 54,54 56,02 66,77 66,77 24,37 24,37 54,54 24,37 56,02 66,77 54,54 56,02 86,89 82,62 117,60 117,60 39,41 39,41 86,89 39,41 82,62 117,60 86,89 82,62 109,08 112,04 133,54 133,54 48,74 48,74 109,08 48,74 112,04 133,54 109,08 112,04 18,40 22,41 55,64 39,41 21,72 24,37 35,89 66,77 54,54 33,53 39,41 55,76 117,60 86,89 51,30 48,74 71,78 133,54 109,08 67,06
Please contact us, if you require the shipping price for island. Many resin and hardener products are categorised as hazardous goods and it is f orbidden to send them by parcel service. For this reason we dispatch these products by f orwarding agencies. Please ask f or shipping costs to your country.
HP-Textiles
Otto-Hahn-Strasse 22
D-48480 Schapen
115
Ordering Information
HP-Textiles GmbH Otto-Hahn-Str. 22 48480 Schapen Germany Tel.: +49 (0) 5905 945 98 70 Fax: +49 (0) 5905 945 98 74 info@hp-textiles.com www.hp-textiles.com