0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
44 tayangan8 halaman
Cooper Cameron Valves offers a complete array of valves, accessories and product support services for Fuel Handling Applications. W-K-M, Cameron and Demco products can be found where fire safety to API 607, 6FA and RP6FA is a necessity. All products are designed to be easily automated and are available with a variety of actuators.
Cooper Cameron Valves offers a complete array of valves, accessories and product support services for Fuel Handling Applications. W-K-M, Cameron and Demco products can be found where fire safety to API 607, 6FA and RP6FA is a necessity. All products are designed to be easily automated and are available with a variety of actuators.
Cooper Cameron Valves offers a complete array of valves, accessories and product support services for Fuel Handling Applications. W-K-M, Cameron and Demco products can be found where fire safety to API 607, 6FA and RP6FA is a necessity. All products are designed to be easily automated and are available with a variety of actuators.
Provide Premium Service for Fuel Handling Applications. For the safe and efficient handling of fuels in terminals, fuel depots and storage facilities, Cooper Cameron Valves offers a complete array of valves, accessories and product support ser- vices. From main feed line emergency shutdown valve systems in tank farms, to hand-operated quarter-turn valves in airport fuel terminals, W-K-M, Cameron and Demco products can be found where fire safety to API 607, 6FA and RP6FA is of utmost concern, and dependable operation is a necessity. A Wide Selection of Proven Valves To safely and effectively handle the vast majority of fuel applications, Cooper Cameron Valves recommends four primary W-K-M products; the DynaCentric High Performance Butterfly Valve, DynaSeal 370CT Trunnion Ball Valve, DynaSeal Floating Ball Valve and Saf-T-Seal Gate Valve. Cooper Cameron Valves can also provide other varieties of W-K-M, Cameron and Demco products to meet special customer installation and operating requirements. All of these products have been proven effective in handling some of the most volatile fluids in some of the most demanding and hazardous operating environments. Built to Suit Customer Requirements All W-K-M, Cameron and Demco products are designed to be easily automated and are available with a variety of actuators. Standard products are also available or can be trimmed to Valves for Fuel Handling Systems accommodate almost any API, ANSI, ASME, NACE or MSS standard. Superior Quality and Customer Support With all Cooper Cameron Valve products, every phase of valve manufacturing from procurement throughout manufacture is subject to stringent quality control. To support customers after installation, Cooper Cameron Valves provides 24-hour, year- round service and spare parts availability. 2 Applications: Storage Tank Inlet, Discharge and ESD (Emergency Shut Down) Tank Drain Main and Distillation Manifold Isolation Pump, Suction and Discharge Filter and Filter Meter Installation and Bypass Loading Arm Isolation Pit Service Hydrant Service Water-Oil Separator DynaCentric
High Performance Butterfly Valves for Fuel Handling Systems
W-K-M High Performance DynaCentric Butterfly Valve 1 3 2 Advantages: Firesafe to API 607 Certified Bi-Directional Operation to 1480 psi Three Seats in Contact with Disc at all Times Operating Temperature to 1000F ISO 9001 Easily Automated MSSP 68 API 609 End-to-End Firesafe Before, During and After Fire DynaCentric High Performance Butterfly Valve Specifications: Sizes and Pressure Classes: 3"-24" in Class 150 3"-24" in Class 300 3"-12" in Class 600 Operating Temperature: -20F to +1000F Body Types: Flangeless wafer, threaded lug Materials: Carbon steel, stainless steel 3 Deep Stuffing Box Positively Retained Stem Trip-L-Seal Seat Integral Internal Stop Heavy Cast Mounting Bracket Seat Retainer Corrosion-resistant Disc Spacer Seat Retainer Gasket SD- 11356 SD- 11373 Fire-Tested Bi-Directional DynaCentric Trip-L-Seal Fire-tested valve seats are designed with three seal points: (1) metal seat; (2) polymer seat; and (3) metal seal. These seats are in contact with the closed disc before, during and after the fire to assure a seal in both directions at all times. DynaCentric valves are capable of providing fire-test performance in accordance with API 607. Handle W-K-M 370 CT Trunnion Ball Valve Applications: Storage Tank Inlet; and ESD (Emergency Shut Down) Tank Vent and Drain Main and Distribution Manifold Isolation Pump Suction and Discharge Filter and Filter Meter Isolation and Discharge Loading Arm Isolation Pit Service Hydrant Service DynaSeal
370 CTTrunnion Ball Valves for Fuel Handling Systems
4 Positively-retained stem Self-adjusting ball Stop plate Packing adjustment screws and bonnet cap Deep pocket seat Replaceable packing cup SD- 10038 Specifications: Sizes: 4" - 12" full bore 6"- 14" regular port Pressure Classes: 150 and 300 Standard Materials: Carbon Steel, Stainless Steel End Connections: Flanged, Weld, Weld-by-Flanged DynaSeal 370 CT Trunnion Type Ball Valve Advantages: Firesafe to API 6FA Low Torque Operation Easily Automated Protected Seat Blowout-Proof Stem Pressure Capabilities from Vacuum to 740 psi Block and Bleed Capability SD- 11357 Ground spring DynaSeal 370 CT Deep Pocket Seat The W-K-M DynaSeal 370 CT features a three- piece recessed seat assembly. A seat pocket encapsulates the seat assembly and a metal shoul- der protects the seat from cold flow. An O-ring energizes the seat face against the ball to ensure ball/seat contact at all pressures. In the event that the seat assembly is damaged or destroyed, the metal shoulder acts as a sec- ondary metal-to-metal seal until maintenance can be performed. Seat O-ring Metal Shoulder DynaSeal
Floating Ball Valves for Fuel Handling Systems Advantages: Firesafe to API 607 Protected Seat Blowout-Proof Stem Solid Ball, Heavy-duty Stem Wide Variety of Seat, and Seals Easily Automated External Adjustable Packing Low Emission Design DynaSeal 310 Floating Ball Valve Three-Piece Design DynaSeal 310 Floating Ball Valve Two-Piece Design 5 Positively retained stem Deep pocket protected seat Removable body insert Unibody construction Lockable handle Deep stuffing box External adjustable packing SD- 11347- 96 SD- 9708 SD- 11347- 96 Applications: Storage Tank Inlet; and ESD (Emergency Shut Down) Tank Vent and Drain Main and Distribution Manifold Isolation Pump Suction and Discharge Filter and Filter Meter Isolation and Discharge Loading Arm Isolation Pit Service Hydrant Service DynaSeal 310 Floating Ball Valve Unibody Design DynaSeal
310 Deep Pocket Seat
Metal Shoulder Conical Seat Specifications: Sizes: 1/2" - 14" standard port; 1/4" - 12" full bore Pressure Classes: 150 and 300 End Connections: Flanged, Threaded, Welded Operating Temperature: -20F to +600F (-29C to+316C) Standard Materials: Carbon Steel, Stainless Steel The W-K-M DynaSeal 310 utilizes a single-piece seat. Like the 370 CT, the 310 seat design is also recessed into the valve body and protected by a metal shoulder from cold flow. The metal shoulder also acts as a secondary metal-to-metal seal should the seats be destroyed by fire. The DynaSeal 310 floating ball is free to float and mates perfectly with the conical seats for a positive seal. It is pressure activat- ed the higher the line pressure, the tighter the seal. DynaSeal 310 Floating Ball Valve SD- 11374 Saf-T-Seal
Gate Valves for Fuel Handling Systems Emergency Shutdown Fail-Safe Closed Operation Pop off relief valve Secondary metal-to-metal stem seal Valve body bleed fitting Full bore through conduit Seat assembly In-line replaceable packing Applications: ESD (Emergency Shut Down) Storage Tank Inlet Storage Tank Discharge Main Manifold Isolation Pump Suction Pump Discharge Advantages: Fire-tested to API 6FA Fail-safe Operation Hot-tap Capability Full Bore Through Conduit Flow In-Line Repairability Wide Variety of Actuator Options Double Block and Bleed Emergency Sealant Injection W-K-M Saf-T-Seal Gate Valves are firesafe in accordance to API 6FA specifications. SD- 9705 6 Specifications: Sizes: 2"- 48" full bore Pressure Classes: 150, 300, 400, 600, 900 and 1500 Standard Materials: Carbon Steel, Stainless Steel End Connections: Flanged, Welded SD- 11375 Saf-T-Seal Gate Valve with Saf-T-Gard Diaphragm Actuator The actuator-valve assembly is normally supplied for fail-safe closed operation. The valve is opened by actuator input pressure against the piston/diaphragm which drives the valve stem and reverse-ported gate down into the open position (left). In the event of an abnormal operating condition, actu- ator pressure is bled off by quick bleed pilots, allowing the valve to close by body pressure and spring force (right). Restoring supply pressure will reopen the valve. W-K-M 370 D-4 End Entry Trunnion Ball Valve Two-piece cast valve body for large diameter fuel handling lines. Sizes: 6" - 12" Pressure Classes: 600 Operating Temperatures: -20F to +250F Standard Materials: Carbon Steel, Stainless Steel End Connections: Flanged, Welded Cameron Trunnion Ball Valve Single piece forged or welded valve body for maximum in-line strength and minimum weight. Sizes: 2" - 56" Pressure Classes: 150 - 2500 Operating Temperatures: -20F to +300F Standard Materials: ASTM A350 Grade LF-2 (M) End Connections: Flanged, Welded Demco Butterfly Valve Lightweight, bi-directional and easily automated for general purpose flow control in non-flammable service. Sizes: 2" - 48" Pressure Classes: to 285 psi Operating Temperatures: -30F to +400F Standard Materials: Iron, Bronze,Stainless Steel, Carbon Steel Flange Pattern: Lug and Wafer Demco Series V Trunnion Ball Valve An alternative two-piece trunnion ball valve design. Sizes: 2" - 24" Pressure Classes: 150, 300, 600, 900, 1500, 2500 Operating Temperatures: -20F to +250F Standard Materials: Carbon Steel, Stainless Steel End Connections: Flanged, Welded W-K-M DynaSeal 310 and 210 Threaded-End Ball Valves A three (310) and single (210) piece floating ball valve for small diameter high pressure piping. Sizes: 1/4" - 3" full bore, 1/2" - 3" regular port Pressure Classes: to 5000 psi Operating Temperatures: -20F to +600F Standard Materials: Stainless Steel, Carbon Steel, Bronze, Aluminum End Connections: Threaded W-K-M 370 E-4 Top Entry Trunnion Ball Valve A top-entry designed ball valve for easy in-line maintenance. Sizes: 2" - 8" x 6" Pressure Classes: 600, 900, 1500, 2500 and API 5000 Operating Temperature: -20F to +250F Standard Materials: Carbon Steel, Stainless Steel, Corrosion- Resistant Alloys End Connections: Flanged, Welded For reliable and safe operation where factors such as size, weight, in-line maintainability and economy are considerations, Cooper Cameron Valves manufactures a complete line of other valves to meet special customer fuel handling requirements. 7 SD- 1130- 97 SD- 9708 SD- 7669 SD- 9709 SD- 11329- 99 SD- 11358 Storage Tank Inlet Storage Tank ESD Storage Tank Discharge Tank Vent Tank Drain Main Manifold Isolation Distribution Manifold Isolation Pump Suction Pump Discharge Filter Isolation and Bypass Filter-Meter Isolation Control Valve Isolation Loading Arm Isolation Pit Service Hydrant Service Water-Oil Separator Fuel System Valve Recommendations Valve Type Floating Trunnion High Performance Standard Gate Ball Valves Ball Valves Butterfly Valves Butterfly Valves Valves W-K-M, Cameron , DynaCentric, DynaSeal, Saf-T-Seal, Saf-T-Gardand Demcoare trademarks of Cooper Cameron Corporation Application 16500 South M ain M issouri City, TX 77489-1300 Telephone: 713/499-8511 Fax: 713/499-6965 1-800-323-9160 C ameron Cameron Corporation Cooper Cameron Valve Division 04/96/PDF TC1046