Anda di halaman 1dari 2

* See product booklet Technical overview.

E
N
4
0
3
AB FURHOFFS ROSTFRIA, BOX 93, SE-541 22 SKVDE, SWEDEN. PHONE +46 500-44 45 46, FAX +46 500-44 45 20. www.furhoffs.com info@furhoffs.se
Hygiene drain type 1 FURO 176
For stringent hygienic requirements within the food processing industry, etc.
Hygiene drain type 1 FURO 176
For stringent hygienic requirements within the food processing industry, etc.
(Photo shows floor drain
with top part for clinker floor K3.)
FLOOR DRAIN OF STAINLESS STEEL FOR
EMBEDMENT IN CONCRETE FLOORS:
- Quality acid-resistant SS 2348 (AISI 316L).
- Fixed top part for various flooring materials and loads.
- Supplied with stainless steel, electro-polished lattice gratings
or with a special hygienic ribbed grating that is entirely free of
bacteria-collecting openings.
- Floor channel has outlet part with removable water trap.
- Untrapped version is available.
- The untrapped can later be complemented with a water trap.
HYGIENE TYPE 1 ENTAILS THAT:
1 The drain and channel have rounded bottoms and sides that
are easily accessible without bacteria-collecting openings.
2. The water trap and its seals are easy to remove for inspection
and cleaning.
3. No water remains in the drain when the water trap is removed.
4. All surfaces are pickled.
5. The floor drains for clinker floors are designed without
drainage openings or holes at the sealing layer flanges
because these cannot be produced for hygienic applications.
LOAD CLASSES*:
- L15 for areas with light vehicular traffic, but without trucks.
- M125 for areas with lorry and fork-lift truck traffic.
Tested in accordance with SS-EN 1253 with 10 kN for L15 and
85 kN for M125.
ACCESSORIES:
- Strainer basket 1.3 L, capacity 3.2 L/s. Art. no. 220SK11
- Strainer basket 2.7 L, capacity 3.5 L/s Art. no. 220SK21
(fits only in untrapped).
- Sand trap 0.7 L, capacity 1.5 L/s. Art. no. 220SF11
- Sand trap, 1.5 L, capacity 1.5 L/s Art. no. 220SF21
(fits only in untrapped).
- Standard water trap Art. no. 220V2
(can later be installed in untrapped).
- Water trap with shut-off and tool. Art. no. 220VA2
- Water trap with handle. Art. no. 220VH2
INSTALLATION ACCESSORIES*:
- Adjustable legs for fixing in place. Art. no. 1SB
- Aqua Tt sealing agent for plastic mat Art. no. 1AQUAT
flooring.
VARIANT VERSION:
- All interior surfaces smooth-polished.
- Drainage hole over sealing layer flanges.
The drain can be supplied
with lattice gratings or hygienic
ribbed gratings.
Chapter
1D
PART PHOTOS, ACCESSORIES:
220SK11 220SK21 220SF11
220V2 220VA2 220VH2
220SF21
FURO 176 is constructed of certified floor drain parts from the 008
range. Designed to comply with requirements of applicable norm for
floor drains, SS-EN 1253.*
Outlet, mm Art. no. for FURO 176 FLOOR DRAIN Trapped
S=Side Hygienic Capacity
B=Bottom Load class Lattice grating ribbed grating L/s*
S 110 L15 176 L S110 G L R 176 L S110 G L H 4.8
B 110 L15 176 L B110 G L R 176 L B110 G L H 6.0
S 75 L15 176 L S75 G L R 176 L S75 G L H 4.8
B 75 L15 176 L B75 G L R 176 L B75 G L H 4.8
S 110 M125 176 L S110 G M R 176 L S110 G M H 4.8
B 110 M125 176 L B110 G M R 176 L B110 G M H 6.0
S 75 M125 176 L S75 G M R 176 L S75 G M H 4.8
B 75 M125 176 L B75 G M R 176 L B75 G M H 4.8
Outlet, mm Art. no. for FURO 176 FLOOR DRAIN Untrapped
S=Side Hygienic Capacity
B=Bottom Load class Lattice grating ribbed grating L/s*
S 110 L15 176 L S110 S L R 176 L S110 S L H 8.4
B 110 L15 176 L B110 S L R 176 L B110 S L H 8.8
S 75 L15 176 L S75 S L R 176 L S75 S L H 6.2
B 75 L15 176 L B75 S L R 176 L B75 S L H 6.2
S 110 M125 176 L S110 S M R 176 L S110 S M H 8.4
B 110 M125 176 L B110 S M R 176 L B110 S M H 8.8
S 75 M125 176 L S75 S M R 176 L S75 S M H 6.2
B 75 M125 176 L B75 S M R 176 L B75 S M H 6.2
Code for article number: Type. Length. Outlet. Trapped/Untrapped. Load class. Grating.
FURO 176 available for two load
classes, seven floor types and with
side outlet or bottom outlet.
SPECIFY WHEN DESCRIBING AND ORDERING:
1. Art. no.
2. Length (custom length x width 300 mm)
3. Floor type (see back)
4. Accessories
5. Variant version, if any
AB FURHOFFS ROSTFRIA, BOX 93, SE-541 22 SKVDE, SWEDEN. PHONE +46 500-44 45 46, FAX +46 500-44 45 20. www.furhoffs.com info@furhoffs.se
G
r
a
d
ie
n
t
,

1
.
5
%
L

(
G
r
a
t
in
g

d
im
e
n
s
io
n
)
1
4
4


7
5
/


1
1
0
1
0
5

2
2
1

7
5
/

1
1
0
7
0
3
0
0

(
G
r
a
t
in
g

d
im
e
n
s
io
n
)
1
0
0
*
82
7
0
*
L x 300 23
82
Cl i nker ti l e
Seal i ng compound
Beddi ng mortar
Adhesi on fl ange
Asphal t/
rubber materi al
7
0
*
39
L x 300 23
Cl i nker ti l e
Cl ampi ng fl ange
Seal i ng compound
Beddi ng mortar
Pl asti c mat, 24 mm
L x 300 23
Cl i nker ti l e
Seal i ng compound
L x 300 106
1
6
*
Cl i nker ti l e
Seal i ng compound
Smooth- fi l l ed seal i ng l ayer
Fi xi ng compound
Adhesi on fl ange
Cl i nker ti l e
Pl asti c mat, 4 mm
Fi xi ng compound
Adhesi on fl ange
L x 300 71
1
6
*
Cl i nker ti l e
Seal i ng compound
Pl asti c mat, 24 mm
Fi xi ng compound
Adhesi on fl ange
1
7
40 L x 300
Resi n
Adhesi on fl ange
Pl asti c mat, 4 mm
FURO cl ampi ng frame
Pl asti c mat, 24 mm
56 L x 300
FURO cl ampi ng frame
Hygiene drain type 1 FURO 176 Hygiene drain type 1 FURO 176
* For lengths over 3000 mm, the drains depth dimension increases.
* These dimensions are fixed, but can be adapted
to the desired height upon request.
* These dimensions are fixed, but can be adapted
to the desired height upon request.
* These dimensions are fixed, but can be adapted
to the desired height upon request.
* These dimensions are fixed, but can be adapted
to the desired height upon request.
CLINKER K1
CLINKER K2
CLINKER K3
RESIN FLOOR PLASTIC MAT
CHOOSE ONE OF THE FOLLOWING FLOOR TYPES:
Floor type Floor material Sealing layer Drains sealing layer parts
CLINKER K1 Tiles in bedding mortar Asphalt/rubber material 100 mm wide adhesion flange
CLINKER K2 Tiles in bedding mortar Plastic mat, 24 mm 40 mm wide clamping flange
CLINKER K3 Tiles in bedding mortar *
CLINKER K4 Tiles directly on sealing layer Filled sealing layer 100 mm wide adhesion flange
CLINKER K5 Tiles directly on sealing layer Plastic mat, 24 mm 40 mm wide clamping flange
RESIN FLOOR Resin Resin 40 mm wide adhesion flange
PLASTIC MAT Plastic mat, 24 mm Plastic mat 30 mm wide FURO clamping frame
* Floors without a sealing layer can occur with tiles laid on ground.
Customer-adapted special solutions are our strength. Please contact us for assistance in planning and
drawing. We reserve the right to make changes.
CLINKER K4
CLINKER K5

Anda mungkin juga menyukai