Anda di halaman 1dari 4

SCHEDULE OF QUANTITIES FOR PROVIDING AIR-CONDITIONING WORK GINGER HOTEL AT MANESAR,

GURGAON

S.No Description Unit Qty. Rate(Rs.) Amount(Rs.)

SUB HEAD 'A' - HVAC

1 Supplying, Installation, Testing & Commissioning of Hi-Wall


split air-conditioning unit with aircooled evaporator with coil,
fan, and fan motor, aircooled condenser with hermatically
sealed reciprocatilg / rotary compressor condenser coil,
propeller fans controls, inter connection refrigerant piping upto
10 RMT control panel control cable as required with remote
control panel. Every unit shall be suitable to work at 45oC
ambient temperature and minimum lift/elevation of 15M without
any de-rating complete with all respects.
The Unit Capacities shallbe as follows:
1.1 2 TR Hi-Wall Split air-conditioning units. Nos. 72
1.2 1.5 TR Hi-Wall Split air-conditioning units. No. 1
1.3 1 TR Hi-Wall Split air-conditioning units. No. 1

2 Cassatte Type Spilit Unit


2.1 1 TR Cassatte Unit Nos. 2
2.2 2 TR Cassatte Unit Nos. 6
2.3 3 TR Cassatte Unit Nos. 4

3 Supply, installation, testing and commissioning of Window Air-


conditioning Units as described in specifications. The units
shall be complete with rotary compressor & motor, air cooled
condenser complete in all respects, inclusive of copper
refrigerant piping ,filter insulated drain pan and powder coated
chasis with louvers on rear face.
Quoted price shall include cost of remote control.
3.1 2.0 TR (24000 BTUH) Nos. 3
3.2 1.5 TR (18000 BTUH) Nos. 42
3.3 1.0 TR (12000 BTUH) Nos. R.O.

4 Supply, installation and testing Refrigerant piping with


interconnecting cabling, insulation gas charging, support
complete with all respects.
HI - Wall
4.1 2.0 TR RMT 400
4.2 1.5 TR RMT 30
Cassatte Type Spilit Unit
4.3 1.0 TR Cassatte Unit RMT 25
4.4 2.0 TR Cassatte Unit RMT 50
4.5 3.0 TR Cassatte Unit RMT 40

V.S. Kukreja & Associates (P) Ltd. Ginger Hotel at Manesar, Gurgaon 1
S.No Description Unit Qty. Rate(Rs.) Amount(Rs.)
5 Drain Piping
Providing & fixing of Rigid PVC Piping complete with fittings,
supports as per specifications and duly insulated with 6mm
thickness of closed cell nitrile rubber as per direction of
Engineer-in-charge & specifications enclosed as reqd.
5.1 32 mm dia Mtrs. 100
5.2 25 mm dia Mtrs. 850

6 Exhaust Inline Fan


Supplying, installting, testing and commissioning of inline fan
for exhaust air centrifugal blower and motor encased in sheet
metal casing, as per specifications. The motor shall be suitable
for 220 voltage, 1 phase, 50 cycle AC cycle. The price shall
include fan speed regulator. (20 mm static).
6.1 1900 CFM (Rectangular Type) Nos. 2
6.2 600 CFM Nos. 2
6.3 300 CFM Nos. 12
6.4 150 CFM Nos. 4

7 Propeller Fan
Supply, Installation, testing and commissioning of propeller type
exhaust fans for toilets complete with motor suitable for 220 V,
1 phase 50 cycles AC supply, mounting, frames, louvers and
fan regulator of following sizes.
7.1 225 mm dia Nos. 10

8 SUPPLY AIR WASHER UNITS


Supply, Installation, testing and Commissioning of double skin
air waher units for air cooling, constructed as per detailed
specifications, complete with 50mm thick prefilter 200mm
deep cell deck pad, indigenous pump centrifugal forward
curved fan, motor, V-belt & drive set vibration isolators quick
fill, make up, drain, overflow connection,stater panel etc. The
unit shall be following capacities with

8.1 6000 CFM (With 40mm Static) Nos. 3


8.2 4000 CFM (With 40mm Static) No. 1

9 WET SCRUBBER UNIT


Supply, Installation, testing and Commissioning of wet
scrubber, constructed of 18 G GSS duly powder coated as per
detailed specifications, complete with with backward curved
SISW fan, motor and drive (both fan and motor shall be
mounted on a common frame using cushy foot mounting) water
tank with float valve, pump, distributor, nozzels, drift eleminator,
piping & valve from tank to pump distributor,stater panel,
complete in all respects.
9.1 4500 CFM (With 65mm Static) No. 1

10 Supply, fabrication, installation, balancing and commissioning


of GSS sheet metal rectangular ducting complete with
neoprene rubber gaskets, elbows, splitter dampers, vanes,
hangers, supports etc. as per approved drawings and
specifications of following gauges:-
10.1 24 Gauge ( Thickness 0.63mm) SQM. 350
10.2 22 Gauge (Thickness 0.8mm) SQM. 150

V.S. Kukreja & Associates (P) Ltd. Ginger Hotel at Manesar, Gurgaon 2
S.No Description Unit Qty. Rate(Rs.) Amount(Rs.)
11 Supply, fixing and commissioning of powder coated MS
grilles complete with nuts, bolts, screws etc. as required.
11.1 Supply air grilles with damper SQM. 2
11.2 Exhaust air grilles without damper . SQM. 3

12 Supplying, installation, testing of thermal insulation of supply


air duct with Crosslinked closedcell preformed sections of
polyethylene (FR) insulation of 12 mm laminated with
Aluminium Metalised polyester foil having a low stable k
value of 0.6 with minimum density of 28 kg/cum.
SQM. 150

13 Supply, installation, testing and commissioning of GI volume


control duct damper complete with neoprene rubber
gaskets, nuts, bolts, screws linkages, flanges etc, as per
specifications and drawings of the following size. SQM. 1

14 Supply, installation, testing and commissioning of fresh air duct


comprising of powder coated extruded aluminium louvers with
bird screen, projection with frame and volume control damper
with lever mounting arrangement etc. as per specifications and
drawings. SQM. 2

TOTAL

V.S. Kukreja & Associates (P) Ltd. Ginger Hotel at Manesar, Gurgaon 3
SUMMARY
S. NO. DESCRIPTION AMOUNT

1 SUB HEAD 'A' - HVAC Rs

TOTAL

V.S. Kukreja & Associates (P) Ltd. Ginger Hotel at Manesar, Gurgaon 6

Anda mungkin juga menyukai