Centre of Studies Surveying Science and Geomatics AP220
Project 2: Spatial data editing and attribute data entry
SUG 613 Geographic Information System I Dr. Eran Sadek Said Bin Md Sadek AP2205C
Safwan Izzaty Bin Saharuddin 2011923667 13 / 06 / 2014
1.0 INTRODUCTION Geographic Information System (GIS) integrates hardware, software, and data for capturing, managing, analysing, and displaying all forms of geographically referenced information. GIS allow people to view, understand, interpret, and visualize data in many ways that shows relationships, patterns and trends in the form of maps, globes, reports or charts. GIS assist us on answering questions and solving problems by looking at our data in a way that is quickly understood and easily shared. ArcGIS is the geography platform, enabling an organization to create, organize, and share geographic information and tools with anyone by using intelligent online maps and useful apps. It use a single scalable architecture and user interface. ArcGIS use the applications of ArcCatalog and ArcMap and use the extensions such as Spatial analysis, 3D Analysis, Network Analyst, and Geostatistical Analyst. This report contains the process and output of the project 2 that was given to us. The project is about spatial data editing and attribute data entry. The task for this project is where we need to do spatial data editing which is the process where we need to correct and edit all the layers based on the topological rules, proceed with attribute data entry on all those layers.
2.0 OBJECTIVES i) To familiarize us with topological tools in ArcGIS ii) To learn on how to correct topological and location error in ArcGIS ii) To understand on how to enter attribute data in ArcGIS using subtypes or attributes domain
3.0 EQUIPMENTS AND MATERIAL i) ArcGIS 10.1 ii) All the data from Project 1
4.0 METHODOLOGY 4.1 Spatial data editing 4.1.1 Creating topology i) Create new personal geodatabase. Create feature dataset in it. Import all the shapefile from Project 1. ii) At the dataset, create new Topology. Set 1.00 meter for cluster tolerance. Then, select all the layers. Let the layers be in the same rank. iii) Add rules based on the feature in the created map. iv) Validate the topology. v) On the properties of the topology file, select generate summary to see the error report.
Figure 4.1.1.1 Topology file and topology rules
Figure 4.1.1.2 Topology error report
4.1.2 Edit error i) Add topology dataset into the data frame. The screen will show the map with its error. ii) Turn on the topology toolbar. Click start editing to start activate the editing. iii) Use fix topology error tool to fix the error. iv) Mark as exception for the allowable errors such as; must not have dangles or pseudo nodes error is allowed for end road or any type of line shapefile, must not have gaps for building iv) Check the remaining errors by using the error inspector functions. v) Repeat the steps until all the errors were removed from the map.
Figure 4.1.2.1 Topology errors
Figure 4.1.2.2 Error Inspector that shows the types of errors
4.2 Attribute data entry i) Open the attribute table of a layer. ii) Click add field on the attribute table properties. Insert text in the added field either it is category or name. iii) Key in all the data attribute by activating editing option first. iv) Use field calculator tools for ease the same data entry. iv) Repeat the steps for all the other layers.
Figure 4.2 attribute table for the layers of building
4.3 Classifying layers i) First, open up the properties of a layer. ii) Click on the symbology tab. Click on categories and choose unique values. iii) Choose value field with category. iv) Add up all the values. v) Change the colour or type of the value. vi) Then, all the values will be classified.
Figure 4.3 Layer properties to categories unique values.
4.4 Output This is the result after correcting all the topology errors, entering data attribute and classifying values.
5.0 CONCLUSION As a conclusion, I can state that I was able to familiarize the use of topology in ArcGIS. I was also able to learn on how to correct topological and location errors in ArcGIS. I was also achieved to understand on how to enter attribute data using subtypes or attribute domain.
6.0 COMMENT AND DISCUSSION In this project, I managed to learn and improve the understanding on the use of ArcGIS in the process of correcting topology errors and location errors. The total of topology rules is 32 rules. The rules are based on the demand from the customer or client needs. Digitising accurately help reduce those errors. The location errors could be zero if all the digitising works done with perfectly. The topology errors may fix with the use of correction tools available such as extend, trim or merge. Some of it needed to be digitised back. Some of the errors may set as exception. For the example, the dead-end roads that have dangle error may mark as exception. Entering attribute data was achieved. I used manual method by adding the field in the attribute table. Adding the field enabled the features to relate with other features. Information of the features was obtained from the basemap. Attribute data is important for the client to gather information by only clicking on their needs. The data is then classified into categories by different colours or size. Data quality and integrity is very important. Topology ensures the data and information to be in top value of superiority in order to functioning very well in analysis. The data analysis process might able to proceed without self-doubt.