Proyectos sometidos a informacin pblica 41 Normas publicadas 50 Reglamentos tcnicos 57 Organizacin Mundial del Comercio 62 Suplemento N 259 abril 2011 NORMAS NACIONALES NORMAS INTERNACIONALES NORMAS EUROPEAS PROCEDIMIENTO DE INFORMACIN NOTIFICACIONES OMC 2 Normas Nacionales Iniciacin de Nuevos Trabajos UNE MARZO AEN/CTN APARATOS DE VIDRIO PARA LABORATORIO PNE-EN ISO 4787 Vidrio para laboratorio. Instrumentos volumtricos. Mtodos para el ensayo de la capacidad y su uso. (ISO 4787:2010, ver- sin corregida 2010-06-15). AEN/CTN VALORACIN DE MARCAS PNE 418001 Valoracin de marcas. Requisitos para la valoracin de una marca. AEN/CTN ENSAYOS DE MATERIALES PNE-EN ISO 6892-2 Materiales metlicos. Ensayo de traccin. Parte 2: Mtodo de ensayo a temperatura elevada (ISO 6892-2:2011). AEN/CTN EQUIPOS A PRESIN: CALDERAS PNE-EN 12953-6 Calderas pirotubulares. Parte 6: Requisitos para el equipo de la caldera. AEN/CTN SOLDADURA Y TCNICAS CONEXAS PNE-EN ISO 3580 Consumibles para el soldeo. Electrodos revestidos para el soldeo manual por arco de aceros resistentes a la fuencia. Clasifcacin (ISO 3580:2010). PNE-EN ISO 4136 Ensayos destructivos de uniones soldadas en materiales me- tlicos. Ensayo de traccin transversal (ISO 4136:2001). PNE-EN ISO 5178 Ensayos destructivos de uniones soldadas en materiales me- tlicos. Ensayos de traccin longitudinal sobre el metal de aportacin en uniones soldadas por fusin (ISO 5178:2001). PNE-EN ISO 9015-1 Ensayos destructivos de soldaduras en materiales metlicos. Ensayo de dureza. Parte 1: Ensayo de dureza en uniones sol- dadas por arco (ISO 9015-1:2001). PNE-EN ISO 9015-2 Ensayos destructivos de soldaduras en materiales metlicos. Ensayo de dureza. Parte 2: Ensayo de microdureza en unio- nes soldadas (ISO 9015-2:2003). PNE-EN ISO 9016 Ensayos destructivos de uniones soldadas en materiales me- tlicos. Ensayo de fexin por choque. Posicin de la probeta, orientacin de la entalla y examen (ISO 9016:2001). PNE-EN ISO 17637 Examen no destructivo de soldaduras por fusin. Examen vi- sual de las uniones soldadas por fusin (ISO 17637:2003). AEN/CTN ELEMENTOS DE FIJACIN PNE-EN ISO 14585 Tornillos autorroscantes con cabeza cilndrica redondeada con hueco hexalobular (ISO 14585:2011). PNE-EN ISO 14586 Tornillos autorroscantes de cabeza avellanada con hueco hexalobular (ISO 14586:2011). PNE-EN ISO 14587 Tornillos autorroscantes de cabeza avellanada abombada con hueco hexalobular (ISO 14587:2011). AEN/CTN TUBERAS DE FUNDICIN, GRIFERA, VALVULERA Y ACCESORIOS DE MATERIALES METLICOS PNE-EN 1113:2008+A1 Grifera sanitaria. Flexibles de ducha para grifera sanitaria para sistemas de alimentacin de agua de tipo 1 y de tipo 2. Especifcaciones tcnicas generales. AEN/CTN APLICACIONES FERROVIARIAS PNE-EN 14033-1 Aplicaciones ferroviarias. Va. Mquinas para la construccin y el mantenimiento que se desplazan exclusivamente sobre carriles. Parte 1: Requisitos tcnicos para la circulacin. PNE-EN ISO 3381 Aplicaciones ferroviarias. Acstica. Medicin del ruido en el interior de vehculos sobre carriles (ISO 3381:2005). AEN/CTN PRODUCTOS ALIMENTARIOS PNE-EN ISO 12966-2 Aceites y grasas de origen animal y vegetal. Cromatografa de gases de los esteres de metilo de cidos grasos. Par- te 2: Preparacin de esteres de cidos grasos (ISO 12966- 2:2011). AEN/CTN SIDERURGIA PNE-EN 10351 Anlisis qumico de materiales siderrgicos. Anlisis de ace- ros dbilmente aleados por espectrometra de emisin pti- ca con fuente de plasma inducido. Determinacin del Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) y Sn [Mtodo de Rutina]. AEN/CTN METALES LIGEROS Y SUS ALEACIONES PNE-EN ISO 2106 Anodizado del aluminio y sus aleaciones. Determinacin de la masa por unidad de superfcie (densidad superfcial) de los recubrimientos andicos. Mtodo gravimtrico (ISO 2106:2011). PNE-EN ISO 8994 Anodizacin del aluminio y sus aleaciones. Sistema de cla- sifcacin para la evaluacin de la corrosin por picaduras. Mtodo de la cuadrcula (ISO 8994:2011). 3 AEN/CTN INDUSTRIAS TEXTILES PNE-EN 15973 Tejidos recubiertos de plstico o caucho. Tejidos de tapicera. Resistencia al manchado. PNE-EN 15977 Tejidos recubiertos de plsticos o caucho. Propiedades me- cnicas. Determinacin del alargamiento bajo carga y la de- formacin residual. AEN/CTN PTICA OFTLMICA PNE-EN 16128 Mtodo de ensayo de referencia para la determinacin de la liberacin de nquel de las partes de monturas de gafas y gafas de sol destinadas a entrar en contacto directo y pro- longado con la piel. PNE-EN ISO 8624 ptica oftlmica. Monturas de gafas. Sistema de medida y terminologa (ISO 8624:2011). AEN/CTN PINTURAS Y BARNICES PNE-EN ISO 2811-1 Pinturas y barnices. Determinacin de la densidad. Parte 1: Mtodo del picnmetro (ISO 2811-1:2011). PNE-EN ISO 2811-2 Pinturas y barnices. Determinacin de la densidad. Parte 2: Mtodo del cuerpo de inmersin (plomada) (ISO 2811- 2:2011). PNE-EN ISO 2811-3 Pinturas y barnices. Determinacin de la densidad. Parte 3: Mtodo de oscilacin (ISO 2811-3:2011). PNE-EN ISO 2811-4 Pinturas y barnices. Determinacin de la densidad. Parte 4: Mtodo del cilindro a presin (ISO 2811-4:2011). AEN/CTN PRODUCTOS PETROLFEROS PNE-EN 12846-1 Betunes y ligantes bituminosos. Determinacin del tiempo de fuencia por medio de un viscosmetro de fujo. Parte 1: Emulsiones bituminosas. PNE-EN 12846-2 Betunes y ligantes bituminosos. Determinacin del tiempo de fuencia por medio de un viscosmetro de fujo. Parte 2: Betunes fuidifcados y fuxados. PNE-EN 13074-1 Betunes y ligantes bituminosos. Recuperacin del ligante de las emulsiones bituminosas o de los ligantes bituminosos fuidifcados o fuxados. Parte 1: Recuperacin por evapora- cin. PNE-EN 13074-2 Betunes y ligantes bituminosos. Recuperacin del ligante de las emulsiones bituminosas o de los ligantes bituminosos fuidifcados o fuxados. Parte 2: Estabilizacin despus de la recuperacin por evaporacin. AEN/CTN PLSTICOS Y CAUCHO PNE 53417 Plsticos y caucho. Especifcacin de las mquinas para en- sayos de traccin, fexin y compresin de caucho y plsticos con velocidad de desplazamiento constante. PNE 53508 Elastmeros. Tolerancias para artculos de goma maciza. Par- te 1. Tolerancias dimensionales. PNE-EN 548 Revestimientos de suelo resilientes. Especifcacin para lin- leo liso y decorativo. PNE-EN 649 Revestimientos de suelo resilientes. Revestimientos de suelo homogneos a base de poli(cloruro de vinilo). Especifcacio- nes. PNE-EN 651 Revestimientos de suelo resilientes. Revestimientos de suelo de poli (cloruro de vinilo) sobre una capa de espuma. Espe- cifcaciones. PNE-EN 652 Revestimientos de suelo resilientes. Revestimientos de suelo de poli (cloruro de vinilo) sobre un soporte a base de corcho. Especifcaciones. PNE-EN ISO 10350-2 Plsticos. Obtencin y presentacin de datos nicos com- parables. Parte 2: Plsticos reforzados con fbras largas (ISO 10350-2:2010). AEN/CTN INDUSTRIAS GRFICAS PNE-ISO 12646 Tecnologa grfca. Pantallas para pruebas de color. Caracte- rsticas y condiciones de visualizacin. AEN/CTN MADERA Y CORCHO PNE 56544 Clasifcacin visual de la madera aserrada para uso estructu- ral. Madera de conferas. PNE 56546 Clasifcacin visual de la madera aserrada para uso estructu- ral. Madera de frondosas. AEN/CTN CELULOSA Y PAPEL PNE-EN ISO 5264-2 Pastas. Refno de laboratorio. Parte 2: Mtodo del molino PFI (ISO 5264-2:2011). PNE-EN ISO 7263 Papel para ondular. Determinacin de la resistencia al aplas- tamiento en plano tras la ondulacin en laboratorio (ISO 7263:2011). AEN/CTN INDUSTRIAS DEL CUERO, CALZADO Y DERIVADOS PNE-EN ISO 10748 Calzado. Mtodos de ensayo para cierres de cremallera. Fuer- za de cierre de la cremallera (ISO 10748:2011). PNE-EN ISO 17072-1 Cuero. Determinacin qumica del contenido en metal. Parte 1: Metales extrables (ISO 17072-1:2011). PNE-EN ISO 17072-2 Cuero. Determinacin qumica del contenido en metal. Parte 2: Contenido total en metal (ISO 17072-2:2011). 4 Normas Nacionales AEN/CTN COMBUSTIBLES GASEOSOS E INSTALACIONES Y APARATOS DE GAS PNE-EN 624 Exigencias para los aparatos que utilizan exclusivamente ga- ses licuados del petrleo. Aparatos de calefaccin de circuito estanco que funcionan con gases licuados del petrleo, des- tinados a instalarse en vehculos y barcos. PNE-EN 1949 Especifcaciones de las instalaciones de sistemas de GLP para usos domsticos en los vehculos habitables de recreo y otros vehculos. AEN/CTN BIENES DE EQUIPO INDUSTRIALES Y EQUIPOS A PRESIN PNE-EN 15776 Recipientes a presin no sometidos a llama. Requisitos adi- cionales para el diseo y la fabricacin de recipientes a pre- sin y de partes a presin en fundicin de hierro con alarga- miento igual o inferior al 15%. PNE-EN ISO 22434 Botellas para el transporte de gas. Inspeccin y manteni- miento de las vlvulas de botellas (ISO 22434:2006). AEN/CTN TRACTORES Y MAQUINARIA AGRCOLA Y FORESTAL PNE-EN 13683:2004+A2 Equipos de jardinera. Trituradoras/picadoras de restos de poda motorizadas. Seguridad. PNE-EN ISO 22868 Maquinaria forestal. Cdigo de ensayo de ruido para mqui- nas porttiles con motor de combustin interna. Mtodos de ingeniera (grado 2) (ISO 22868:2011). AEN/CTN MEDIO AMBIENTE PNE-EN ISO 5667-23 Calidad del agua. Muestreo. Parte 23: Determinacin de los contaminantes prioritarios en las aguas superfciales me- diante muestreo pasivo (ISO 5667-23:2011). AEN/CTN INDUSTRIAS DE LA FUNDICIN PNE-EN 1559-1 Fundicin. Condiciones tcnicas de suministro. Parte 1: Ge- neralidades. PNE-EN 1560 Fundicin. Sistema de designacin para fundicin de hierro. Designacin simblica y numrica. PNE-EN 12513 Fundicin. Fundiciones resistentes a la abrasin. AEN/CTN METROLOGA Y CALIBRACIN PNE-EN 15964 Etilmetros diferentes de los dispositivos de un solo uso. Re- quisitos y mtodos de ensayo. AEN/CTN CERRAMIENTOS DE HUECOS EN EDIFICACIN Y SUS ACCESORIOS PNE-EN 13126-19 Herrajes para la edifcacin. Requisitos y mtodos de ensayo de ventanas y puertas balconeras. Parte 19: Herrajes para ventanas deslizantes. AEN/CTN MATERIALES SINTERIZADOS Y SUS MATERIAS PRIMAS PNE-EN ISO 3953 Polvos metlicos. Determinacin de la densidad por com- pactacin mediante sacudidas (ISO 3953:2011). AEN/CTN CLIMATIZACIN PNE-EN 14276-1:2007+A1 Equipos a presin para sistemas de refrigeracin y bombas de calor. Parte 1: Recipientes. Requisitos generales. PNE-EN 14276-2:2008+A1 Equipos a presin para sistemas de refrigeracin y bombas de calor. Parte 2: Redes de tuberas. Requisitos generales. PNE-EN 15316-4-8 Sistemas de calefaccin en los edifcios. Mtodo para el cl- culo de los requisitos de energa del sistema y de la efciencia del sistema. Parte 4-8: Sistemas de generacin para calefac- cin de locales, sistemas de calefaccin por aire y de calefac- cin por radiacin suspendidos. PNE-EN 15879-1 Ensayos y determinacin de las caractersticas de las bombas de calor de intercambio directo con el suelo con compresor accionado elctricamente para calefaccin y/o refrigeracin de locales, Parte 1: Bombas de calor de intercambio directo con el agua. AEN/CTN YESO Y PRODUCTOS A BASE DE YESO PNE-EN 12859 Paneles de yeso. Defniciones, especifcaciones y mtodos de ensayo. AEN/CTN MATERIALES IMPERMEABILIZANTES PARA LA CONSTRUCCIN PNE 104244 Impermeabilizacin. Materiales bituminosos y bituminosos modifcados. Lminas de alquitrn modifcado con polme- ros. AEN/CTN ODONTOLOGA PNE-EN ISO 3107 Odontologa. Cementos dentales a base de xido de zinc-eugenol y a base de xido de zinc sin eugenol (ISO 3107:2011). AEN/CTN APARATOS Y DISPOSITIVOS MDICOS Y QUIRRGICOS PNE-EN 455-2:2010+A1 Guantes mdicos para un solo uso. Parte 2: Requisitos y en- sayos para la determinacin de las propiedades fsicas. PNE-EN 15986 Smbolo para uso en el etiquetado de productos sanitarios. Requisitos para el etiquetado de productos sanitarios que contienen ftalatos. AEN/CTN CORROSIN Y PROTECCIN DE LOS MATERIALES METLICOS PNE-EN ISO 26945 Recubrimientos metlicos y otros recubrimientos inorgni- cos. Recubrimientos electrolticos de aleaciones estao-co- balto (ISO 26945:2011). 5 AEN/CTN COBRE Y SUS ALEACIONES PNE-CEN/TS 15916-1 EX Cobre y aleaciones de cobre. Determinacin del contenido de teluro. Parte 1: Contenido bajo de teluro. Mtodo de es- pectrometra atmica de absorcin a la llama (FAAS). AEN/CTN MATERIALES CERMICOS DE ARCILLA COCIDA PARA LA CONSTRUCCIN PNE-EN 15037-3:2010+A1 Productos prefabricados de hormign. Sistemas de forjado de vigueta y bovedilla. Parte 3: Bovedillas de arcilla cocida. AEN/CTN DEPORTES. EQUIPAMIENTOS E INSTALACIONES DEPORTIVAS PNE-EN 13089 Equipos de alpinismo y escalada. Piolets. Requisitos de segu- ridad y mtodos de ensayo. AEN/CTN BIOCOMBUSTIBLES SLIDOS PNE-EN 14961-5 Biocombustibles slidos. Especifcaciones y clases de com- bustibles. Parte 5: Lea de madera para uso no industrial. PNE-EN 15234-1 Biocombustibles slidos. Aseguramiento de la calidad del combustible. Parte 1: Requisitos generales. AEN/CTN INFANCIA PNE 172402 Escuelas infantiles. Gestin del servicio. Requisitos generales. AEN/CTN CALIDAD Y SEGURIDAD EN LOS CENTROS DE ASISTENCIA SANITARIA PNE 179001 Calidad en los centros y servicios dentales. Requisitos gene- rales. PNE 179005 Criterios de calidad de un seguro dental. AEN/CTN SOSTENIBILIDAD EN LA CONSTRUCCIN PNE-EN 15643-2 Sostenibilidad en la construccin. Evaluacin de la sosteni- bilidad de los edifcios. Parte 2: Marco para la evaluacin del comportamiento ambiental. AEN/CTN APARAMENTA Y ACCESORIOS DE BAJA TENSIN PNE-EN 50550 Dispositivos de proteccin contra las sobretensiones a fre- cuencia industrial para usos domsticos y anlogos. PNE-EN 60695-2-12 Ensayos relativos a los riesgos del fuego. Parte 2-12: Mtodos de ensayo del hilo incandescente. Mtodo de ensayo de in- famabilidad del hilo incandescente (GWFI) para materiales. PNE-EN 60695-2-13 Ensayos relativos a los riesgos del fuego. Parte 2-13: Mtodos de ensayo del hilo incandescente. Mtodos de ensayo de la temperatura de ignicin del hilo incandescente (GWIT) para materiales. PNE-EN 60947-1:2008/A1 Aparamenta de baja tensin. Parte 1: Reglas generales. AEN/CTN MAQUINARIA PARA LA CONSTRUCCIN, OBRA CIVIL Y EDIFICACIN PNE-EN 500-4 Maquinaria mvil para construccin de carreteras. Seguri- dad. Parte 4: Requisitos especfcos para compactadores. PNE-ISO 21507 Maquinaria para movimiento de tierras. Requisitos de pres- taciones para depsitos de combustible no metlicos. PNE-ISO 22448 Maquinaria para movimiento de tierras. Sistemas antirrobo. Clasifcacin y prestaciones. AEN/CTN TABACO Y PRODUCTOS DEL TABACO PNE 118021-1 Tabaco y productos de tabaco. Determinacin de carbohi- dratos totales. Anlisis por fujo continuo. Parte 1: Mtodo por hidrlisis enzimtica. PNE 118025 Tabaco y productos del tabaco. Determinacin del contenido de amonio en tabaco. Mtodos de anlisis por fujo continuo y por cromatografa lquida. PNE-ISO 15592-1 Picadura de tabaco y artculos de fumado hechos a partir de este tipo de tabaco. Mtodos de toma de muestras, acondicionamiento y ensayo. Parte 1: Toma de mues- tras. PNE-ISO 15592-2 Picadura de tabaco y artculos de fumado hechos a partir de este tipo de tabaco. Mtodos de toma de muestras, acondi- cionamiento y ensayo. Parte 2 : Atmsfera para el acondicio- namiento y ensayo. PNE-ISO 15592-3 Picadura de tabaco y artculos de fumado hechos a partir de este tipo de tabaco. Mtodos de toma de muestras, acondicio- namiento y ensayo. Parte 3: Determinacin de la materia parti- culada total en artculos de fumado utilizando una mquina de fumar analtica de rutina, preparacin para la determinacin de agua y nicotina y determinacin del condensado seco exento de nicotina. PNE-ISO 22634 Cigarrillos. Determinacin de benzo[a]pireno en la corriente principal del humo del cigarrillo. Mtodo utilizando croma- tografa de gases/espectrometra de masas. AEN/CTN ENVASES DE VIDRIO PNE 126408 Envases de vidrio. Bocas de botellas. Perfles de boca roscada de 30 mm alta y extra alta para lquidos no carbonatados y perfles interiores de boca roscada preparados para su uso con insertos de 31,5 mm estndar, 31,5 mm H44 y 35 mm estndar para lquidos no carbonatados. AEN/CTN PREFABRICADOS DE CEMENTO Y DE HORMIGN PNE-EN 15037-2:2009+A1 Productos prefabricados de hormign. Sistemas de for- jado de vigueta y bovedilla. Parte 2: Bovedillas de hor- mign. 6 Normas Nacionales PNE-EN 61058-2-1 Interruptores para aparatos. Parte 2-1: Requisitos particula- res para los interruptores para cables fexibles. PNE-EN 61386-21:2005/A11 Sistemas de tubos para la conduccin de cables. Parte 21: Requisitos particulares. Sistemas de tubos rgidos. PNE-EN 61386-22:2005/A11 Sistemas de tubos para la conduccin de cables. Parte 22: Requisitos particulares. Sistemas de tubos curvables. PNE-EN 61386-23:2005/A11 Sistemas de tubos para la conduccin de cables. Parte 23: Requisitos particulares. Sistemas de tubos fexibles. PNE-EN 62041 Seguridad de transformadores, reactancias, unidades de ali- mentacin y productos anlogos para tensiones de alimen- tacin hasta 1100 V. Requisitos CEM. AEN/CTN INSTALACIONES ELCTRICAS PNE 202010 Electrodos de puesta a tierra para instalaciones de baja ten- sin. Placas de cobre, acero-cobre y de acero inoxidable y sus accesorios. PNE-EN 60079-19 Atmsferas explosivas. Parte 19: Reparacin, revisin y re- construccin de material. AEN/CTN EQUIPAMIENTO ELCTRICO Y SISTEMAS AUTOMTICOS PARA LA INDUSTRIA PNE-EN 50122-1 Aplicaciones ferroviarias. Instalaciones fjas. Seguridad elc- trica, puesta a tierra y corrientes de retorno. Parte 1: Medidas de proteccin frente a los choques elctricos. PNE-EN 60034-18-32 Mquinas elctricas rotativas. Parte 18-32: Evaluacin fun- cional de los sistemas de aislamiento. Procedimientos de en- sayo para devanados preformados. Evaluacin elctrica de los sistemas de aislamiento utilizados en mquinas elctricas rotativas. PNE-EN 60745-2-13:2010/A1 Herramientas manuales elctricas accionadas por motor elctrico. Seguridad. Parte 2-13: Requisitos particulares para sierras de cadena. PNE-EN 60745-2-21:2010/A1 Herramientas manuales elctricas accionadas por motor elctrico - Seguridad. Parte 2-21: Requisitos particulares para las limpiadoras de desages. AEN/CTN PRODUCCIN DE ENERGA ELCTRICA PNE 206007 IN Requisitos para inversores fotovoltaicos de conexin a red. AEN/CTN TRANSPORTE Y DISTRIBUCIN DE ENERGA ELCTRICA PNE 207020 IN Procedimiento para garantizar la proteccin de la salud y de las personas en instalaciones elctricas de ensayo y de me- dida de alta tensin. PNE-CLC/TS 61643-12 Pararrayos de baja tensin. Parte 12: Dispositivos de pro- teccin contra las sobretensiones conectados a las redes de distribucin de baja tensin. Principio de seleccin y apli- cacin. PNE-EN 60060-1 Tcnicas de ensayo en alta tensin. Requisitos de ensayo y defniciones generales. PNE-EN 60060-2 Tcnicas de ensayos de alta tensin. Parte 2: Sistemas de me- dida. Proyecto de norma horizontal. PNE-EN 62475 Tcnicas de ensayo en alta tensin: Defniciones y requisitos para los ensayos de corriente y sistemas de medida. AEN/CTN COMPATIBILIDAD ELECTROMAGNTICA PNE-EN 55022:2008/A2 Equipos de tecnologa de la informacin. Caractersticas de las perturbaciones radioelctricas. Lmites y mtodos de me- dida. PNE-EN 55022 Equipos de tecnologa de la informacin. Caractersticas de las perturbaciones radioelctricas. Lmites y mtodos de me- dida. AEN/CTN EQUIPOS ELECTRNICOS PNE-EN 60065:2003/A12 Aparatos de audio, vdeo y aparatos electrnicos anlogos. Requisitos de seguridad. PNE-EN 60749-15 Dispositivos de semiconductores. Mtodos de ensayo me- cnicos y climticos. Parte 15: Resistencia a la temperatura de soldadura para dispositivos montados con agujeros pa- santes. PNE-EN 60749-34 Dispositivos semiconductores. Ensayos mecnicos y climti- cos. Parte 34: Ciclo de potencia. PNE-EN 60950-1:2007/A12 Equipos de tecnologa de la informacin. Seguridad. Parte 1: Requisitos generales. AEN/CTN ASPECTOS ELCTRICOS DE LAS TELECOMUNICACIONES PNE-EN 50173-2:2009/A1 Tecnologa de la informacin. Sistemas de cableado genri- co. Parte 2: Edifcios de ofcina. PNE-EN 50173-3:2009/A1 Tecnologa de la informacin. Sistemas de cableado genri- co. Parte 3: Instalaciones industriales. PNE-EN 50173-4:2009/A1 Tecnologa de la informacin. Sistemas de cableado genri- co. Parte 4: Hogares. PNE-EN 50174-2 Tecnologa de la informacin. Instalacin del cableado. Parte 2: Mtodos y planifcacin de la instalacin en el interior de los edifcios. 7 AEN/CTN CABLES DE ENERGA ELCTRICA PNE 21144-1-1 Cables elctricos. Clculo de la intensidad admisible. Parte 1-1: Ecuaciones de intensidad admisible (factor de carga 100%) y clculo de prdidas. Generalidades. AEN/CTN CABLES DE TELECOMUNICACIONES Y FIBRA PTICA PNE-EN 61300-2-9 Dispositivos de interconexin de fbra ptica y componentes pasivos. Ensayos bsicos y procedimientos de medida. Parte 2-9: Ensayos. Choque. AEN/CTN ELECTRODOMSTICOS PNE-EN 62115:2006/IS1 Juguetes elctricos. Seguridad. AEN/CTN COMBUSTIBLES SLIDOS RECUPERADOS PNE-EN 15357 Combustibles slidos recuperados. Terminologa, defnicio- nes y descripciones. PNE-EN 15358 Combustibles slidos recuperados. Sistemas de gestin de la calidad. Requisitos particulares para su aplicacin a la pro- duccin de combustibles slidos recuperados. PNE-EN 15400 Combustibles slidos recuperados. Determinacin del poder calorfco. PNE-EN 15402 Combustibles slidos recuperados. Determinacin del conte- nido de materia voltil. PNE-EN 15403 Combustibles slidos recuperados. Determinacin del con- tenido de ceniza. PNE-EN 15407 Combustibles slidos recuperados. Mtodos para la determi- nacin del contenido en carbono (C), hidrgeno (H) y nitr- geno (N). PNE-EN 15408 Combustibles slidos recuperados. Mtodos para la deter- minacin del contenido en azufre (S), cloro (Cl), for (F) y bromo (Br). PNE-EN 15414-3 Combustibles slidos recuperados. Determinacin del conte- nido en humedad por el mtodo de secado en estufa. Parte 3. Humedad de la muestra para anlisis general. PNE-EN 15440 Combustibles slidos recuperados. Mtodos para la determi- nacin del contenido en biomasa. PNE-EN 15442 Combustibles slidos recuperados. Mtodos de muestreo. PNE-EN 15443 Combustibles slidos recuperados. Mtodos para la prepara- cin de la muestra de laboratorio. Informacin Pblica MARZO AEN/CTN ENSAYOS DE MATERIALES PNE-EN ISO 148-1 Materiales metlicos. Ensayo de fexin por choque con pn- dulo Charpy. Parte 1: Mtodo de ensayo (ISO 148-1:2009). AEN/CTN PRODUCTOS ALIMENTARIOS PNE 34802 Especias y condimentos. Determinacin por espectrofoto- metra ultravioleta-visible de picrocrocina en azafrn (Crocus sativus L.). PNE 34803 Especias y condimentos. Determinacin por espectrofotome- tra ultravioleta-visible de safranal en azafrn (Crocus sativus L.). PNE 34804 Especias y condimentos. Determinacin de colorantes apo- lares en azafrn (Crocus sativus L.) mediante cromatografa lquida de alta resolucin. PNE-CEN ISO/TS 11133-2:2006/A1 Microbiologa de los alimentos para consumo humano y ani- mal. Gua para la preparacin y produccin de medios de cultivo. Parte 2: Gua prctica para las pruebas de rendimien- to de medios de cultivo. Modifcacin 1: Microorganismos de control para medios de cultivo utilizados habitualmente (ISO/TS 11133-2:2003/AMD 1:2011). AEN/CTN PINTURAS Y BARNICES PNE 48315-1 Pinturas y barnices. Determinacin de propiedades antico- rrosivas de recubrimientos orgnicos mediante la tcnica electroqumica cclica acelerada (ACET). Parte 1: Toma de datos. AEN/CTN INDUSTRIAS GRFICAS PNE 54100-5 Industrias grfcas. Vocabulario. Parte 5: Trminos funda- mentales sobre pruebas. AEN/CTN MADERA Y CORCHO PNE 56544 Clasifcacin visual de la madera aserrada para uso estructu- ral. Madera de conferas. 8 Normas Nacionales Informacin Pblica Paralela MARZO AEN/CTN LA GESTIN DE LOS INMUEBLES, SUS SERVICIOS Y LOS PROCESOS ASOCIADOS PNE-prEN 15221-7 Gestin de inmuebles - Parte 7: Desempeo del benchmar- king. AEN/CTN SOLDADURA Y TCNICAS CONEXAS PNE-FprEN ISO 26304 Consumibles para el soldeo. Alambres, alambres tubulares y combinaciones alambre-fundente para el soldeo por arco sumergido de aceros de alta resistencia. Clasifcacin. (ISO/ FDIS 26304:2011). AEN/CTN SEGURIDAD CONTRA INCENDIOS PNE-prEN 54-22 Sistemas de deteccin y alarma de incendios. Parte 22: De- tectores de calor en lnea reseteables. AEN/CTN APLICACIONES FERROVIARIAS PNE-prEN 16251 Aplicaciones ferroviarias. Condiciones medioambientales. Di- seo y ensayo de material rodante bajo condiciones severas. AEN/CTN PRODUCTOS ALIMENTARIOS PNE-FprEN ISO 3961 Aceites y grasas de origen animal y vegetal. Determinacin del ndice de yodo (ISO 3961:2009). AEN/CTN PINTURAS Y BARNICES PNE-prEN ISO 11997-2 Pinturas y barnices. Determinacin de la resistencia a condi- ciones cclicas de corrosin. Parte 2: Humedad (niebla sali- na)/sequedad/humedad/luz UV (ISO/DIS 11997-2:2011). AEN/CTN PLSTICOS Y CAUCHO PNE-prEN 13067 Personal de soldeo de materiales plsticos. Ensayos de cuali- fcacin de soldadores. Conjuntos de accesorios termoplsti- cos con uniones soldadas. PNE-prEN 13100-4 Ensayos no destructivos de las uniones soldadas en produc- tos termoplsticos semi-acabados. Parte 4: Ensayo en alta tensin. PNE 56546 Clasifcacin visual de la madera aserrada para uso estructu- ral. Madera de frondosas. AEN/CTN BIENES DE EQUIPO INDUSTRIALES Y EQUIPOS A PRESIN PNE-EN 14359:2008+A1 Acumuladores hidroneumticos para transmisiones hidru- licas. AEN/CTN ACEITES ESENCIALES Y PRODUCTOS COSMTICOS PNE 84082 Productos cosmticos. Dentfricos. Slice precipitada. PNE 84706 Materias primas cosmticas. Hidroxietilcelulosa. AEN/CTN MAQUINARIA PARA LA CONSTRUCCIN, OBRA CIVIL Y EDIFICACIN PNE-ISO 21507 Maquinaria para movimiento de tierras. Requisitos de pres- taciones para depsitos de combustible no metlicos. PNE-ISO 22448 Maquinaria para movimiento de tierras. Sistemas antirrobo. Clasifcacin y prestaciones. AEN/CTN PESCA EXTRACTIVA PNE 195001:2008/1M Gua de prcticas correctas de higiene para produccin pri- maria en pesca. Mareas de menos de 48 h. AEN/CTN CABLES DE ENERGA ELCTRICA PNE 21123-3 Cables elctricos de utilizacin industrial de tensin asignada 0,6/1 kV. Parte 3: Cables con aislamiento de etileno-propileno y cubierta de policloruro de vinilo. PNE 21123-5 Cables elctricos de utilizacin industrial de tensin asignada 0,6/1 kV. Parte 5: Cables con aislamiento de etileno propileno y cubierta de poliolefna. AENOR est presente en el campo de la formacin mediante cursos y seminarios que ponen a disposicin de los profesionales de todos los sectores tcnicas y herramientas de gestin avanzadas cuya aplicacin es imprescindible para mantener una posicin de competitividad en el mercado. Contacte con el Tel. 902 102 201 Fax 913 10 36 95 formacin@aenor.es http://www.aenor.es formacin 9 PNE-prEN 16249 Cisternas para el transporte de mercancas peligrosas. Equi- pamiento de servicio. Tapa para el adaptador para la carga y descarga por la parte inferior. AEN/CTN TRACTORES Y MAQUINARIA AGRCOLA Y FORESTAL PNE-prEN 16246 Maquinaria agrcola - retrocargadores seguridad. AEN/CTN ESTRUCTURAS METLICAS PERMANENTES PNE-EN 1090-2:2008/FprA1 Ejecucin de estructuras de acero y aluminio. Parte 2: Requi- sitos tcnicos para la ejecucin de estructuras de acero. AEN/CTN MEDIO AMBIENTE PNE-prEN 16253 Calidad del aire - Mediciones atmosfricas prximas al suelo por Espectroscopa de Absorcin ptica Diferencial (DOAS) - Mediciones de aire ambiente y de emisin difusa. AEN/CTN PREVENCIN Y MEDIOS DE PROTECCIN PERSONAL Y COLECTIVA EN EL TRABAJO PNE-FprEN 13861 Seguridad de las mquinas. Gua para la aplicacin de las normas sobre ergonoma al diseo de mquinas. AEN/CTN METROLOGA Y CALIBRACIN PNE-FprEN 62638 Ensayos recurrentes y ensayos despus de la reparacin y modifcacin de equipos elctricos. AEN/CTN CERRAMIENTOS DE HUECOS EN EDIFICACIN Y SUS ACCESORIOS PNE-FprEN 13126-2 Herrajes para la edifcacin. Requisitos y mtodos de ensayo para herrajes para ventanas y puertas balconeras. Parte 2: Manillas con pestillo incorporado. AEN/CTN IMPLANTES QUIRRGICOS PNE-FprEN ISO 7439 Dispositivos intrauterinos contraceptivos que contienen co- bre. Requisitos y ensayos (ISO/FDIS 7439:2011). PNE-prEN ISO 5840-3 Implantes cardiovasculares. Prtesis de vlvulas cardacas. Parte 3: Vlvulas cardiacas de sustitucin implantadas por tcnicas mnimamente invasivas (ISO/DIS 5840-3:2011). AEN/CTN CLIMATIZACIN PNE-FprCEN/TR 16244 Ventilacin en hospitales. PNE-FprEN 15726 Ventilacin de edifcios. Difusin de aire. Mediciones para evaluar las condiciones trmicas y acsticas en las zonas ocupadas de las estancias climatizadas/ventiladas. PNE-FprEN 15780 Ventilacin de edifcios. Conductos. Limpieza de sistemas de ventilacin. PNE-prEN 12828 Sistemas de calefaccin en edifcios. Diseo de los sistemas de calefaccin por agua. PNE-prEN 15012 Sistemas de canalizacin en materiales plsticos. Componen- tes de canalizacin para la evacuacin de aguas residuales en el interior de edifcios. Requisitos y mtodos de ensayo/ evaluacin para tubos y accesorios. PNE-prEN 15013 Sistemas de canalizacin en materiales plsticos. Componen- tes de canalizacin para redes de evacuacin y saneamiento enterradas sin presin. Requisitos y mtodos de ensayo/eva- luacin para tubos y accesorios. PNE-prEN 15014 Sistemas de canalizacin en materiales plsticos. Compo- nentes de canalizacin enterrados o areos para suministro de agua y otros lquidos bajo presin. Requisitos y mtodos de ensayo/evaluacin para tubos y accesorios. PNE-prEN 15015 Sistemas de canalizacin en materiales plsticos. Componen- tes de canalizacin para agua fra y caliente no destinada al consumo humano. Requisitos y mtodos de ensayo/evalua- cin para tubos y accesorios. PNE-prEN 16245-1 Materiales compuestos plsticos reforzados con fbras. De- claracin de las caractersticas de las materias primas. Parte 1: Requisitos generales. PNE-prEN 16245-2 Materiales compuestos plsticos reforzados con fbras. De- claracin de las caractersticas de las materias primas. Parte 2: Requisitos particulares para resinas, sistemas de polimeri- zacin, aditivos y modifcadores. PNE-prEN 16245-3 Materiales compuestos plsticos reforzados con fbras. De- claracin de las caractersticas de las materias primas. Parte 3: Requisitos particulares para fbras. PNE-prEN 16245-4 Materiales compuestos plsticos reforzados con fbras. De- claracin de las caractersticas de las materias primas. Parte 4: Requisitos particulares para tejidos. PNE-prEN 16245-5 Materiales compuestos plsticos reforzados con fbras. De- claracin de las caractersticas de las materias primas. Parte 5: Requisitos particulares para materiales del ncleo. PNE-prEN ISO 5659-2 Plsticos. Generacin de humo. Parte 2: Determinacin de la densidad ptica mediante el ensayo en una cmara simple (ISO/DIS 5659-2:2011). AEN/CTN MAQUINARIA DE ELEVACIN Y TRANSPORTE PNE-prEN 13852-1 Gras. Gras martimas. Parte 1: Gras martimas para uso general. AEN/CTN BIENES DE EQUIPO INDUSTRIALES Y EQUIPOS A PRESIN PNE-prEN 14116 Cisternas para el transporte de mercancas peligrosas. In- terfaz digital para el dispositivo de reconocimiento del pro- ducto. 10 Normas Nacionales AEN/CTN APARATOS Y DISPOSITIVOS MDICOS Y QUIRRGICOS PNE-prEN 14204 Antispticos y desinfectantes qumicos. Ensayo cuantitativo de suspensin para la evaluacin de la actividad micobac- tericida de los antispticos y desinfectantes qumicos utili- zados en veterinaria. Mtodo de ensayo y requisitos (fase 2, etapa 1). PNE-prEN 14349 Antispticos y desinfectantes qumicos. Ensayo de super- ficie cuantitativo para la evaluacin de la actividad bacte- ricida de los antispticos y desinfectantes qumicos utili- zados en el rea veterinaria sobre superficies no porosas sin accin mecnica. Mtodo de ensayo y requisitos (fase 2, etapa 2). AEN/CTN MAQUINARIA PARA LA CONSTRUCCIN, OBRA CIVIL Y EDIFICACIN PNE-prEN 16228-1 Equipos de perforacin y cimentacin - Seguridad - Parte 1: Requisitos generales. PNE-prEN 16228-2 Equipos de perforacin y cimentacin - Seguridad - Parte 2: Equipos mviles de perforacin para la ingeniera civil y geotcnica, la explotacin de canteras y minera. PNE-prEN 16228-3 Equipos de perforacin y cimentacin - Seguridad - Parte 3: Equipos de perforacin en direccin horizontal (HDD). PNE-prEN 16228-4 Equipos de perforacin y cimentacin - Seguridad - Parte 4: Equipos de cimentacin. PNE-prEN 16228-5 Equipos de perforacin y cimentacin - Seguridad - Parte 5: Equipos para muros pantalla. PNE-prEN 16228-6 Equipos de perforacin y cimentacin - Seguridad - Parte 6: Equipos de gunitado, inyectado y proyectado. PNE-prEN 16228-7 Equipos de perforacin y cimentacin - Seguridad - Parte 7: Equipo intercambiable auxiliar. AEN/CTN GENERADORES Y EMISORES DE CALOR PNE-prEN 12809 Calderas domsticas independientes que utilizan combusti- ble slido. Potencia trmica nominal inferior o igual a 50 kW. Requisitos y mtodos de ensayo. PNE-prEN 12815 Cocinas domsticas que utilizan combustibles slidos. Requi- sitos y mtodos de ensayo. PNE-prEN 13240 Estufas que utilizan combustibles slidos. Requisitos y m- todos de ensayo. AEN/CTN GESTIN DE RESIDUOS SLIDOS Y ASIMILABLES URBANOS, INDUSTRIALES Y ESPECIALES PNE-prEN 16250-1 Niveles desempeo y aceptacin de los servicios de gestin de limpieza de calles y de de residuos municipales. Parte 1: Requisitos generales. PNE-prEN 16252 Mquinas para compactacin de desechos o de fracciones reciclables - Prensas de prensado horizontal - Requisitos de seguridad. AEN/CTN ADHESIVOS Y SELLANTES PNE-prEN 16254 Adhesivos. Isocianato polimerizado en emulsin (EPI) para madera de uso estructural. Clasifcacin y requisitos de com- portamiento. AEN/CTN RIDOS PNE-FprEN 12620 ridos para hormign. PNE-FprEN 13043 ridos para mezclas bituminosas y tratamientos superfciales de carreteras, aeropuertos y otras zonas pavimentadas. PNE-FprEN 13139 ridos para morteros. Norma UNE-EN 15838:2010 Centros de contacto con el cliente. Requisitos para la prestacin del servicio Da las pautas para mejorar la calidad del servicio que los centros de contacto ofrecen a sus clientes, evitando quejas sobre el tiempo de espera, la efcacia de las respuestas o el trato impersonal. Especifca una serie de requisitos que ayudarn a los centros de contacto con el cliente a: Establecer su estrategia y poltica de gestin Defnir las competencias de los agentes de los CCC Analizar los canales de comunicacin disponibles Utilizar las herramientas adecuadas de hardware y software Documentar los procesos principales Medir la satisfaccin del cliente Analizar los indicadores clave de rendimiento Conocer las habilidades recomendadas para la gestin y estrategia en un CCC A4 - 32 pginas 30,50 Ms informacin: 902 102 201 - aenor.publicaciones@aenor.es - www.aenor.es ediciones 11 PNE-FprEN 13242 ridos para capas granulares y capas tratadas con conglome- rados hidrulicos para uso en capas estructurales de frmes. AEN/CTN APARAMENTA Y ACCESORIOS DE BAJA TENSIN PNE-EN 60947-5-2:2007/FprA1 Aparamenta de baja tensin. Parte 5-2: Aparatos y elemen- tos de conmutacin para circuitos de mando. Detectores de proximidad. PNE-FprEN 60669-2-6 Interruptores para instalaciones elctricas fjas, domsticas y anlogas. Parte 2-6: Interruptores de bombero para sealiza- cin interior, exterior y luminarias. PNE-FprEN 61439-4 Conjuntos de aparamenta de baja tensin. Parte 4: Conjun- tos para emplazamientos de la construccin. AEN/CTN INSTALACIONES ELCTRICAS PNE-prEN 50491-4-1 Requisitos generales para sistemas electrnicos para vivien- das y edifcios (HBES) y sistemas de automatizacin y control de edifcios (BACS) - Parte 4-1: Requisitos generales de segu- ridad funcional para productos destinados a ser integrados en sistemas electrnicos para viviendas y edifcios (HBES) y sistemas de automatizacin y control de edifcios (BACS). AEN/CTN EQUIPAMIENTO ELCTRICO Y SISTEMAS AUTOMTICOS PARA LA INDUSTRIA PNE-FprEN 61029-2-8 Seguridad de las mquinas herramientas elctricas semifjas. Parte 2-8: Requisitos particulares para las tupes de un solo husillo vertical. PNE-prEN 50152-1 Aplicaciones ferroviarias. Instalaciones fjas. Requisitos parti- culares para aparamenta de corriente alterna. Parte 1: Inte- rruptores automticos con tensin nominal superior a 1 kV. PNE-prEN 50152-2 Aplicaciones ferroviarias. Instalaciones fjas. Requisitos par- ticulares para aparamenta de corriente alterna. Parte 2: Sec- cionadores, seccionadores de puesta a tierra y conmutadores con tensin nominal superior a 1 kV. AEN/CTN LMPARAS Y EQUIPOS ASOCIADOS PNE-EN 62035:2000/FprA2 Lmparas de descarga (excluyendo lmparas fuorescentes) - Especifcaciones de seguridad. AEN/CTN PRODUCCIN DE ENERGA ELCTRICA PNE-FprEN 60819-3-3 Papeles no celulsicos para usos elctricos. Parte 3: Especi- fcaciones para materiales particulares. Hoja 3: Paquetes de aramida (poliamida aromtica) sin carga. AEN/CTN TRANSPORTE Y DISTRIBUCIN DE ENERGA ELCTRICA PNE-EN 62271-100:2009/FprA1 Aparamenta de alta tensin. Parte 100: Interruptores auto- mticos de corriente alterna. PNE-FprEN 60544-5 Materiales aislantes elctricos. Determinacin de los efectos de las radiaciones ionizantes. Parte 5: Procedimientos de es- timacin del envejecimiento en servicio (Ratifcada por AE- NOR en julio de 2003). PNE-FprEN 62056-8-3 Intercambio de datos para los equipos de medida de la ener- ga elctrica. Conjunto DLMS/COSEM. Parte 8-3: Perfl PLC S- FSK para redes circundantes. PNE-FprEN 62056-9-7 Intercambio de datos para los equipos de medida de la ener- ga elctrica. Conjunto DLMS/COSEM. Parte 9-7: Perfl de co- municacin para redes TCP-UDP/IP. PNE-FprEN 62217 Aisladores HV polimricos para uso interior y exterior. Def- niciones generales, mtodos de ensayo y criterios de acep- tacin. PNE-FprEN 62271-101 Aparamenta de alta tensin. Parte 101: Ensayos sintticos. PNE-FprEN 62271-105 Aparamenta de alta tensin. Parte 105: Combinados inte- rruptor-fusibles de corriente alterna para tensiones nomina- les superiores a 1 kV e inferiores o iguales a 52 kV. PNE-FprEN 62271-107 Aparamenta de alta tensin. Parte 107: Interruptores de altas prestaciones (IAP) con fusibles, de corriente alterna para tensio- nes asignadas superiores a 1kV e inferiores o iguales a 52 kV. PNE-FprEN 62271-110 Aparamenta de alta tensin. Parte 110: Maniobra de cargas inductivas. PNE-FprEN 62641 Conductores para lneas areas. Alambres de aluminio y de aleacin de aluminio para conductores cableados en capas concntricas. AEN/CTN COMPATIBILIDAD ELECTROMAGNTICA PNE-EN 61000-4-25:2002/FprA1 Compatibilidad electromagntica (CEM). Parte 4-25: Tcnicas de ensayo y de medida. Mtodos de ensayos de inmunidad al IEMN-GA para los equipos y sistemas. AEN/CTN EQUIPOS ELECTRNICOS PNE-EN 60601-1:2006/FprA1 Equipos electromdicos. Parte 1: Requisitos generales para la seguridad bsica y funcionamiento esencial. PNE-EN 60601-2-44:2009/FprA1 Equipos electromdicos. Parte 2-44: Requisitos particulares para la seguridad bsica y funcionamiento esencial de equi- pos de rayos X para tomografa asistida por ordenador. PNE-FprEN 50563 Fuentes de alimentacin externas de c.a.- c.c. y de c.a. - c.a. Determinacin de la energa sin carga y de la efciencia me- dia en los modos activos. PNE-FprEN 60286-3 Embalaje de componentes para manejo automtico. Parte 3: Embalaje de componentes apropiados para el montaje superfcial sobre cintas continuas. 12 Normas Nacionales PNE-FprEN 60297-3-107 Estructuras mecnicas para equipos electrnicos. Dimensio- nes de las estructruras mecnicas de la serie de 482,6 mm (19 pulgadas). Parte 3-107: Dimensiones de los sub-bastidores y de las unidades conectables, factor de forma pequeo. PNE-FprEN 61076-3-110 Conectores para equipos electrnicos. Requisitos del pro- ducto. Parte 3-110: Especifcacin particular para conectores apantallados, libre y fjos para transmisin de datos con fre- cuencias de hasta 1 000 MHz. PNE-FprEN 61076-4-116 Conectores para equipos electrnicos. Requisitos de produc- to. Parte 4-116: Conectores para tarjetas impresas. Especi- fcacin particular para un conector de dos partes de alta velocidad con funcin de blindaje integrada. PNE-FprEN 61988-2-5 Paneles de pantalla de plasma. Parte 2-5: Mtodos de medi- da. Ruido acstico. PNE-FprEN 61988-4-2 Paneles de pantalla de plasma. Parte 4-2: Mtodos de medi- da de resistencia de los paneles. PNE-FprEN 62575-2 Filtros de onda acstica de volumen (BAW) de radiofrecuen- cia (RF) de calidad evaluada. Parte 2: Gua de uso. PNE-FprEN 62623 Medicin del consumo de energa de los ordenadores de es- critorio y porttiles. AEN/CTN ASPECTOS ELCTRICOS DE LAS TELECOMUNICACIONES PNE-EN 61937-1:2007/FprA1 Audio digital. Interfaz para fujos de bits de audio codifca- dos en PCM no lineal aplicando la Norma IEC 60958. Parte 1: Generalidades (IEC 61937-1:2007). PNE-EN 61937-2:2007/FprA1 Audio digital. Interfaz para fujos de bits de audio codifca- dos en PCM no lineal aplicando la Norma CEI 60958. Parte 2: Informacin de la rfaga (IEC 61937-2:2007). (Ratifcada por AENOR en enero de 2008). AEN/CTN CABLES DE ENERGA ELCTRICA PNE-FprEN 60317-60 Especifcaciones para tipos particulares de hilos para bobi- nas electromagnticas. Parte 60: Requisitos generales. Hilo de cobre de seccin rectangular desnudo o esmaltado, cu- bierto con fbra de vidrio con polister, impregnada o no con resina o barniz., ndice de temperatura 155. PNE-FprEN 60317-61 Especifcaciones para tipos particulares de hilos para bobi- nas electromagnticas. Parte 61: Requisitos generales. Hilo de cobre de seccin rectangular desnudo o esmaltado, cu- bierto con fbra de vidrio con polister, impregnada o no con resina o barniz., ndice de temperatura 180. PNE-FprEN 60317-62 Especifcaciones para tipos particulares de hilos para bobi- nas electromagnticas. Parte 62: Requisitos generales. Hilo de cobre de seccin rectangular desnudo o esmaltado, cu- bierto con fbra de vidrio con polister, impregnada o no con resina o barniz., ndice de temperatura 200. AEN/CTN CABLES DE TELECOMUNICACIONES Y FIBRA PTICA PNE-FprEN 60793-2 Fibra ptica. Especifcacin de producto: Parte 2: Generalidades. AEN/CTN ELECTRODOMSTICOS PNE-EN 61121:2011/FprAA Secadoras de tambor para uso domstico. Mtodos para la medicin de la aptitud a la funcin. PNE-FprEN 60704-2-6 Aparatos electrodomsticos y anlogos. Cdigo de ensayo para la determinacin del ruido acstico areo. Parte 2-6: Requisitos particulares para secadoras de tipo tambor. PNE-FprEN 60734 Aparatos electrodomsticos. Aptitud para la funcin. Agua dura para los ensayos. PNE-FprEN 61121 Secadoras de tambor para uso domstico. Mtodos para la medicin de la aptitud a la funcin. AEN/CTN EQUIPOS Y MTODOS DE MEDIDA RELACIONADOS CON LOS CAMPOS ELECTROMAGNTICOS EN EL ENTORNO HUMANO PNE-EN 50400:2006/FprA1 Norma bsica para demostrar la conformidad de los equipos fjos de transmisin de radio (110 MHz - 40 GHz) destinados al uso en redes de telecomunicacin inalmbricas con las restricciones bsicas o los niveles de referencia relativos a la exposicin del pblico en general a los campos electromag- nticos de radiofrecuencia, cuando se ponen en servicio. PNE-EN 50401:2006/FprAA Norma de producto para demostrar la conformidad de los equipos fjos de transmisin de radio (110 MHz - 40 GHz) des- tinados al uso en redes de telecomunicacin inalmbricas con las restricciones bsicas o los niveles de referencia relativos a la exposicin del pblico en general a los campos electromag- nticos de radiofrecuencia, cuando se ponen en servicio. AEN/CTN ENERGAS RENOVABLES, CAMBIO CLIMTICO Y EFICIENCIA ENERGTICA PNE-prEN 16247-1 Auditoras energticas. Parte 1: Requisitos generales. AEN/CTN SISTEMAS DE SUMINISTRO DE ENERGA ELCTRICA PNE-FprEN 60038 Tensiones nominales de CENELEC. En estas pginas encontrar un bono de pedido para la adquisicin de las normas y publicaciones distribuidas por AENOR. ADQUISICIN DE NORMAS Y PUBLICACIONES 13 Normas Editadas MARZO AEN/CTN MAQUINARIA PARA LA INDUSTRIA CRNICA UNE-EN 12463:2006+A1:2011 Maquinaria para el procesado de alimentos. Mquinas de rellenar y mquinas auxiliares. Requisitos de seguridad e hi- giene (Sustituye a: UNE-EN 12463:2006). Precio: 42,82 EUR AEN/CTN ENSAYOS DE MATERIALES UNE-EN ISO 12737:2011 Materiales metlicos. Determinacin de la resistencia a la fractura por deformacin plana (ISO 12737:2010) (Sustituye a: UNE-EN ISO 12737:2006). Precio: 29,33 EUR AEN/CTN MOBILIARIO UNE-EN 12227:2011 Parques para uso domstico. Requisitos de seguridad y m- todos de ensayo. (Sustituye a: UNE-EN 12227-1:2000, UNE- EN 12227-2:2000). Precio: 34,72 EUR AEN/CTN MQUINAS-HERRAMIENTA UNE-EN ISO 23125:2011 Mquinas-herramienta. Seguridad. Tornos (ISO 23125:2010) (Sustituye a: EN ISO 23125:2010). Precio: 48,23 EUR AEN/CTN PRODUCTOS ALIMENTARIOS UNE-EN 15890:2011 Productos alimenticios. Determinacin de patulina en zumos de frutas y purs de fruta para nios. Mtodo por HPLC con purifcacin por cromatografa de reparto lquido/lquido y extraccin en fase slida y deteccin por UV. Precio: 28,44 EUR UNE-EN 15891:2011 Productos alimenticios. Determinacin de desoxinivalenol en cereales, productos a base de cereales y en alimentos a base de cereales para bebs y nios. Mtodo HPLC con purifcacin de columna de inmunoafnidad y deteccin por UV. Precio: 28,44 EUR UNE-EN ISO 6887-5:2011 Microbiologa de los alimentos para consumo humano y ani- mal. Preparacin de las muestras de ensayo, suspensin inicial y diluciones decimales para examen microbiolgico. Parte 5: Re- glas especfcas para la preparacin de leche y productos lcteos (ISO 6887-5:2008) (Sustituye a: UNE-EN ISO 8261:2002). Precio: 28,44 EUR UNE-ISO 5565-2:2011 Vainilla (Vanilla fragans (Salisbury) Ames). Parte 2: Mtodos de anlisis. Precio: 25,39 EUR AEN/CTN SIDERURGIA UNE 36065:2011 Barras corrugadas de acero soldable con caractersticas es- peciales de ductilidad para armaduras de hormign armado (Sustituye a: UNE 36065:2000 EX). Precio: 25,39 EUR UNE 36068:2011 Barras corrugadas de acero soldable para uso estructu- ral en armaduras de hormign armado (Sustituye a: UNE 36068:1994, UNE 36068/1M:1996). Precio: 19,95 EUR AEN/CTN INDUSTRIAS TEXTILES UNE-EN ISO 2307:2011 Cuerdas de fbra. Determinacin de ciertas propiedades fsicas y mecnicas (ISO 2307:2010) (Sustituye a: UNE-EN ISO 2307:2005). Precio: 28,44 EUR UNE-EN ISO 9554:2011 Cuerdas de fbra. Especifcaciones generales (ISO 9554:2010) (Sustituye a: UNE-EN ISO 9554:2005). Precio: 29,33 EUR AEN/CTN PTICA OFTLMICA UNE-EN ISO 14729:2002/A1:2011 ptica oftlmica. Productos para el mantenimiento de las lentes de contacto. Requisitos microbiolgicos y mtodos de ensayo de los productos y regmenes para el mantenimiento de las len- tes de contacto. Modifcacin 1 (ISO 14729:2001/Amd 1:2010). Precio: 25,39 EUR AEN/CTN ENVASES Y EMBALAJES. ASPECTOS HORIZONTALES Y DE GESTIN MEDIOAMBIENTAL UNE-EN ISO 4180:2011 Envases y embalajes. Embalajes de expedicin completos y llenos. Reglas generales para la recopilacin de los esque- mas de ensayos de rendimiento (ISO 4180:2009) (Sustituye a: UNE-EN 24180-1:1994, UNE-EN 24180-2:1994). Precio: 28,44 EUR UNE-EN 15823:2011 Envases y embalajes. Braille sobre envases y embalajes para medicamentos (Sustituye a: UNE 137006:2005, UNE 137006:2005 ERRATUM:2006). Precio: 28,44 EUR AEN/CTN PRODUCTOS PETROLFEROS UNE-EN 15944:2011 Productos petrolferos lquidos. Determinacin del contenido en nquel y vanadio. Anlisis espectromtrico de emisin pti- ca directa por plasma acoplado inductivamente (ICP OES). Precio: 25,39 EUR 14 Normas Nacionales AEN/CTN PLSTICOS Y CAUCHO UNE-EN 1447:2009+A1:2011 Sistemas de canalizacin en materiales plsticos. Tubos de plstico termoestable reforzado con fbra de vidrio (PRFV). Determinacin de la resistencia a largo plazo a la presin interna (Sustituye a: UNE-EN 1447:2009). Precio: 25,39 EUR UNE-EN 1555-1:2011 Sistemas de canalizacin en materiales plsticos para el su- ministro de combustibles gaseosos. Polietileno (PE). Parte 1: Generalidades (Sustituye a: UNE-EN 1555-1:2003). Precio: 28,44 EUR UNE-EN 1555-2:2011 Sistemas de canalizacin en materiales plsticos para el su- ministro de combustibles gaseosos. Polietileno (PE). Parte 2: Tubos (Sustituye a: UNE-EN 1555-2:2003). Precio: 28,44 EUR UNE-EN 1555-3:2011 Sistemas de canalizacin en materiales plsticos para el su- ministro de combustibles gaseosos. Polietileno (PE). Parte 3: Accesorios (Sustituye a: UNE-EN 1555-3:2003, UNE-EN 1555- 3:2003/A1:2005, UNE-EN 1555-3:2003 ERRATUM:2007). Precio: 29,33 EUR UNE-EN 1555-5:2011 Sistemas de canalizacin en materiales plsticos para el suministro de combustibles gaseosos. Polietileno (PE). Par- te 5: Aptitud al uso del sistema (Sustituye a: UNE-EN 1555- 5:2003). Precio: 25,39 EUR UNE-EN 14982:2007+A1:2011 Sistemas de canalizacin y conduccin en materiales plsticos. Conductos ascendentes de material termo- plstico para cmaras de inspeccin y pozos de registro. Determinacin de la rigidez circunferencial (Sustituye a: UNE-EN 14982:2007). Precio: 25,39 EUR UNE-EN ISO 1452-3:2011 Sistemas de canalizacin en materiales plsticos para con- duccin de agua y para saneamiento enterrado o areo con presin. Poli (cloruro de vinilo) no plastifcado (PVC-U). Parte 3: Accesorios (ISO 1452-3:2009, versin corregida 2010-03- 01 ) (Sustituye a: UNE-EN ISO 1452-3:2010). Precio: 34,72 EUR UNE-EN ISO 1452-5:2011 Sistemas de canalizacin en materiales plsticos para con- duccin de agua y para saneamiento enterrado o areo con presin. Poli (cloruro de vinilo) no plastifcado (PVC-U). Parte 5: Aptitud al uso del sistema (ISO 1452-5:2009, versin corre- gida 2010-03-01) (Sustituye a: UNE-EN ISO 1452-5:2010). Precio: 28,44 EUR UNE-EN ISO 15877-1:2009/A1:2011 Sistemas de canalizacin en materiales plsticos para ins- talaciones de agua caliente y fra. Poli (cloruro de vinilo) clorado (PVC-C). Parte 1: Generalidades. Modifcacin 1 (ISO 15877-1:2009/AMD 1:2010). Precio: 9,86 EUR UNE-EN ISO 15877-2:2009/A1:2011 Sistemas de canalizacin en materiales plsticos para insta- laciones de agua caliente y fra. Poli (cloruro de vinilo) clora- do (PVC-C). Parte 2: Tubos. Modifcacin 1 (ISO 15877-2:2009/ AMD 1:2010). Precio: 9,86 EUR UNE-EN ISO 15877-3:2009/A1:2011 Sistemas de canalizacin en materiales plsticos para insta- laciones de agua caliente y fra. Poli (cloruro de vinilo) clo- rado (PVC-C). Parte 3: Accesorios. Modifcacin 1 (ISO 15877- 3:2009/AMD 1:2010). Precio: 9,86 EUR UNE-EN ISO 15877-5:2009/A1:2011 Sistemas de canalizacin en materiales plsticos para insta- laciones de agua caliente y fra. Poli (cloruro de vinilo) clora- do (PVC-C). Parte 5: Aptitud al uso del sistema. Modifcacin 1 (ISO 15877-5:2009/AMD 1:2010). Precio: 9,86 EUR Ecoetiquetado de bienes y servicios para un desarrollo sostenible Adolfo Carballo Penela Este libro presenta un mtodo de clculo para comunicar de modo efciente la informacin ambiental de los productos a los consumidores y partes interesadas. 5 razones para aplicar el mtodo MC3 Permite calcular simultneamente la huella ecolgica y la huella de carbono, sintetizando los resultados en un nico ndice. De aplicacin en cualquier tipo de organizacin, tamao y complejidad. Recoge las emisiones directas e indirectas de CO 2
y los principales gases de efecto invernadero. Se ajusta a la visin que desde instituciones como la Comisin Europea se tiene de lo que debe ser la huella ecolgica y la huella de carbono. Es coherente con normas internacionales relativas a las emisiones de organizaciones y empresas, como la ISO 14064. 2010 Rstica 17 x 24 cm 360 pginas - 36 ISBN: 978-84-8143-708-9 Ms informacin: 902 102 201 - aenor.publicaciones@aenor.es - www.aenor.es ediciones 15 UNE-ISO 13953:2011 Tubos y accesorios de polietileno (PE). Determinacin de la resistencia a la traccin y tipo de fallo en probetas soldadas a tope. Precio: 25,39 EUR UNE-EN ISO 175:2011 Plsticos. Mtodos de ensayo para la determinacin de los efectos de la inmersin en productos qumicos lquidos (ISO 175:2010) (Sustituye a: UNE-EN ISO 175:2001). Precio: 29,33 EUR AEN/CTN INDUSTRIAS GRFICAS UNE-ISO 12647-1:2011 Tecnologa grfca. Control del proceso para la elaboracin de separaciones de color, pruebas e impresos de medioto- no. Parte 1: Parmetros y mtodos de medicin (Sustituye a: UNE 54102-1:2000). Precio: 29,33 EUR UNE-ISO 12647-6:2011 Tecnologa grfca. Control del proceso para la elaboracin de separaciones de color, pruebas e impresos de mediotono. Parte 6: Impresin en fexografa. Precio: 25,39 EUR AEN/CTN MADERA Y CORCHO UNE 56810:2010 ERRATUM:2011 Suelos de madera. Colocacin. Especifcaciones. Precio: Sin cargo UNE-EN 338:2010 ERRATUM:2011 Madera estructural. Clases resistentes. Precio: Sin cargo UNE-EN 384:2010 ERRATUM:2011 Madera estructural. Determinacin de los valores caracters- ticos de las propiedades mecnicas y la densidad. Precio: Sin cargo AEN/CTN CELULOSA Y PAPEL UNE-ISO 9416:2011 Papel. Determinacin de los coefcientes de dispersin y ab- sorcin de la luz (utilizando la teora de Kubelka-Munk). Precio: 25,39 EUR AEN/CTN MAQUINARIA DE ELEVACIN Y TRANSPORTE UNE-EN 619:2003+A1:2011 Equipamientos y sistemas de manutencin continua. Requi- sitos de seguridad y de CEM para los equipamientos de ma- nutencin mecnicos de cargas aisladas (Sustituye a: UNE-EN 619:2003). Precio: 48,23 EUR UNE-EN 1175-1:1998+A1:2011 Seguridad de las carretillas de manutencin. Requisitos elc- tricos. Parte 1: Requisitos generales para carretillas alimenta- das por bateras (Sustituye a: UNE-EN 1175-1:1998). Precio: 34,72 EUR UNE-EN 1175-2:1998+A1:2011 Seguridad de las carretillas de manutencin. Requisitos elc- tricos. Parte 2: Requisitos generales para carretillas equipa- das con motor trmico (Sustituye a: UNE-EN 1175-2:1998). Precio: 25,39 EUR UNE-EN 1175-3:1998+A1:2011 Seguridad de las carretillas de manutencin. Requisitos elctricos. Parte 3: Requisitos particulares de los sistemas de transmisin elctrica de las carretillas equipadas con motor trmico (Sustituye a: UNE-EN 1175-3:1998). Precio: 28,44 EUR UNE-EN 15878:2011 Sistemas de almacenamiento en estanteras metlicas. Tr- minos y defniciones (Sustituye a: UNE 58011:2004). Precio: 48,23 EUR UNE-ISO 4190-1:2011 Instalacin de ascensores. Parte 1: Ascensores de las clases I, II, III y VI (Sustituye a: UNE 58707-1:2000). Precio: 29,33 EUR AEN/CTN COMBUSTIBLES GASEOSOS E INSTALACIONES Y APARATOS DE GAS UNE 60630:2011 Diseo, construccin, montaje y explotacin de estaciones de servicio de GLP para vehculos a motor (Sustituye a: UNE 60630:2003, UNE 60630/1M:2003, UNE 60630/1M:2004 ERRA- TUM, UNE 60630:2003 ERRATUM:2009). Precio: 19,95 EUR AEN/CTN BIENES DE EQUIPO INDUSTRIALES Y EQUIPOS A PRESIN UNE-EN 1012-1:2011 Compresores y bombas de vaco. Requisitos de seguridad. Parte 1: Compresores de aire. Precio: 34,72 EUR UNE-EN 1829-2:2009/AC:2011 Mquinas por chorro de agua a alta presin. Requisitos de se- guridad. Parte 2: Mangueras, tuberas fexibles y conexiones. Precio: Sin cargo Biblioteca Gnova, 6. 28004 MADRID Dotada de la ms completa coleccin de normas y documentos relativos a normalizacin y certifcacin, es de acceso libre al pblico de lunes a jueves de 09:00 a 14:00 y de 16:00 a 18:00, viernes slo en horario de maana. En ella podr consultar: Normas nacionales UNE, europeas, internacionales y de los principales organismos de normalizacin de todo el mundo. Publicaciones y revistas especializadas, textos legislativos del BOE y del DOCE. Las delegaciones de AENOR disponen de un servicio para la consulta directa de las normas UNE en sus ofcinas. informacin 16 Normas Nacionales UNE-EN 12542:2011 Equipos y accesorios para GLP. Depsitos cilndricos estticos, en acero soldado, fabricados en serie para el almacenaje de gas licuado de petrleo (GLP) de volumen inferior o igual a 13 m. Diseo y fabricacin (Sustituye a: UNE-EN 12542:2002, UNE-EN 14075:2003, UNE-EN 12542:2002/A1:2005, UNE-EN 14075:2003/A1:2005). Precio: 42,82 EUR UNE-EN 13480-2:2003/A1:2011 Tuberas metlicas industriales. Parte 2: Materiales. Precio: 31,62 EUR UNE-EN 14116+A2:2011 Cisternas para el transporte de mercancas peligrosas. Inter- faz digital para el dispositivo de reconocimiento del produc- to (Sustituye a: UNE-EN 14116+A1:2009). Precio: 31,62 EUR UNE-EN ISO 13341:2011 Botellas para el transporte de gas. Acoplamiento de las vl- vulas a las botellas de gas (ISO 13341:2010) (Sustituye a: UNE-EN ISO 13341:1999). Precio: 25,39 EUR AEN/CTN TRACTORES Y MAQUINARIA AGRCOLA Y FORESTAL UNE-ISO 20019:2011 Vehculos agrcolas. Uniones mecnicas en vehculos remol- cados. Dimensiones de los anillos de enganche. Precio: 19,95 EUR AEN/CTN ACSTICA UNE-EN ISO 7779:2011 Acstica. Medida del ruido areo emitido por los equipos de tecnologa de la informacin y de telecomunicaciones (ISO 7779:2010) (Sustituye a: UNE-EN ISO 7779:2002, UNE-EN ISO 7779/A1:2003). Precio: 45,91 EUR UNE-EN ISO 10140-1:2011 Acstica. Medicin en laboratorio del aislamiento acstico de los elementos de construccin. Parte 1: Reglas de apli- cacin para productos especfcos (ISO 10140-1:2010) (Sus- tituye a: UNE-EN 20140-10:1994, UNE-EN ISO 140-1:1998, UNE-EN ISO 140-3:1995, UNE-EN ISO 140-6:1999, UNE-EN ISO 140-8:1998, UNE-EN ISO 140-3:2000 ERRATUM, UNE-EN ISO 140-1:1998/A1:2005, UNE-EN ISO 140-3:1995/A1:2005, UNE-EN ISO 140-16:2007, UNE-EN ISO 140-11:2006). Precio: 34,72 EUR UNE-EN ISO 10140-2:2011 Acstica. Medicin en laboratorio del aislamiento acstico de los elementos de construccin. Parte 2: Medicin del ais- lamiento acstico al ruido areo (ISO 10140-2:2010) (Sus- tituye a: UNE-EN 20140-10:1994, UNE-EN ISO 140-1:1998, UNE-EN ISO 140-3:1995, UNE-EN ISO 140-6:1999, UNE-EN ISO 140-8:1998, UNE-EN ISO 140-3:2000 ERRATUM, UNE-EN ISO 140-1:1998/A1:2005, UNE-EN ISO 140-3:1995/A1:2005, UNE-EN ISO 140-11:2006, UNE-EN ISO 140-16:2007). Precio: 28,44 EUR UNE-EN ISO 10140-3:2011 Acstica. Medicin en laboratorio del aislamiento acstico de los elementos de construccin. Parte 3: Medicin del ais- lamiento acstico al ruido de impactos (ISO 10140-3:2010) (Sustituye a: UNE-EN 20140-10:1994, UNE-EN ISO 140-1:1998, UNE-EN ISO 140-3:1995, UNE-EN ISO 140-6:1999, UNE-EN ISO 140-8:1998, UNE-EN ISO 140-3:2000 ERRATUM, UNE-EN ISO 140-1:1998/A1:2005, UNE-EN ISO 140-3:1995/A1:2005, UNE-EN ISO 140-11:2006, UNE-EN ISO 140-16:2007). Precio: 28,44 EUR UNE-EN ISO 10140-4:2011 Acstica. Medicin en laboratorio del aislamiento acstico de los elementos de construccin. Parte 4: Procedimientos y requisitos de medicin (ISO 10140-4:2010) (Sustituye a: UNE-EN 20140-10:1994, UNE-EN ISO 140-1:1998, UNE-EN ISO 140-3:1995, UNE-EN ISO 140-6:1999, UNE-EN ISO 140- 8:1998, UNE-EN ISO 140-3:2000 ERRATUM, UNE-EN ISO 140- 1:1998/A1:2005, UNE-EN ISO 140-3:1995/A1:2005, UNE-EN ISO 140-11:2006, UNE-EN ISO 140-16:2007). Precio: 28,44 EUR UNE-EN ISO 10140-5:2011 Acstica. Medicin en laboratorio del aislamiento acstico de los elementos de construccin. Parte 5: Requisitos para instalaciones y equipos de ensayo (ISO 10140-5:2010) (Sus- tituye a: UNE-EN 20140-10:1994, UNE-EN ISO 140-1:1998, UNE-EN ISO 140-3:1995, UNE-EN ISO 140-6:1999, UNE-EN ISO 140-8:1998, UNE-EN ISO 140-3:2000 ERRATUM, UNE-EN ISO 140-1:1998/A1:2005, UNE-EN ISO 140-3:1995/A1:2005, UNE-EN ISO 140-11:2006, UNE-EN ISO 140-16:2007). Precio: 34,72 EUR UNE-EN ISO 10848-4:2011 Acstica. Medida en laboratorio de la transmisin por fan- cos del ruido areo y del ruido de impacto entre recintos adyacentes. Parte 4: Aplicacin a las juntas con al menos un elemento pesado (ISO 10848-4:2010). Precio: 25,39 EUR UNE-EN ISO 15186-2:2011 Acstica. Medicin del aislamiento acstico en los edifcios y de los elementos de construccin utilizando intensidad so- nora. Parte 2: Mediciones in situ (ISO 15186-2:2003). Precio: 29,33 EUR Norma UNE 71599-1:2010 Gestin de la continuidad del negocio. Parte 1: Cdigo de prctica Establece los procesos, principios y terminologa necesaria para la implantacin de la continuidad del negocio en una organizacin. Ofrece un sistema basado en buenas prcticas que favorece el entendimiento, desarrollo e implantacin de la continuidad del negocio, as como la confanza entre sus clientes y partes interesadas. 2010 - A4 - 44 pginas - 32,88 Ms informacin: 902 102 201 - aenor.publicaciones@aenor.es - www.aenor.es ediciones 17 UNE-EN ISO 15186-3:2011 Acstica. Medicin del aislamiento acstico en los edifcios y de los elementos de construccin utilizando intensidad so- nora. Parte 3: Mediciones en laboratorio a bajas frecuencias (ISO 15186-3:2002). Precio: 28,44 EUR AEN/CTN MEDIO AMBIENTE UNE-EN 15795:2011 Productos qumicos utilizados en el tratamiento del agua destinada al consumo humano. Aluminosilicatos naturales no expandidos. Precio: 25,39 EUR UNE-EN 1911:2011 Emisiones de fuentes estacionarias. Determinacin de la concentracin msica de cloruros gaseosos expresados como HCl. Mtodo normalizado de referencia (Sustituye a: UNE-EN 1911-1:1998, UNE-EN 1911-2:1998, UNE-EN 1911-3:1998). Precio: 34,72 EUR UNE-EN ISO 6145-9:2011 Anlisis de gas. Preparacin de mezclas de gas para calibracin utilizando mtodos volumtricos dinmicos. Parte 9: Mtodo de saturacin (ISO 6145-9:2009) (Sustituye a: UNE-ISO 6145-9:2007). Precio: 28,44 EUR AEN/CTN PREVENCIN Y MEDIOS DE PROTECCIN PERSONAL Y COLECTIVA EN EL TRABAJO UNE-EN 420:2004+A1:2010 ERRATUM:2011 Guantes de proteccin. Requisitos generales y mtodos de ensayo. Precio: Sin cargo AEN/CTN METROLOGA Y CALIBRACIN UNE-EN ISO 286-2:2011 Especifcacin geomtrica de productos (GPS). Sistema de codifcacin ISO para las tolerancias en dimensiones lineales. Parte 2: Tablas de las clases de tolerancia normalizadas y de las desviaciones lmite para agujeros y ejes (ISO 286-2:2010) (Sustituye a: UNE-EN 20286-2:1996). Precio: 40,1 EUR AEN/CTN ACEITES ESENCIALES Y PRODUCTOS COSMTICOS UNE 84666:2011 Materias primas cosmticas. Extractos vegetales. Determina- cin cuantitativa de cidos orgnicos por HPLC (Sustituye a: UNE 84666:2006). Precio: 9,86 EUR UNE 84767:2011 Materias primas cosmticas. Extractos vegetales. Extracto hi- drogliclico de bardana (Arctium majus L). Precio: 9,86 EUR UNE 84768:2011 Materias primas cosmticas. Extractos vegetales. Extracto hi- drogliclico de cola de caballo (Equisetum arvense L). Precio: 9,86 EUR AEN/CTN AISLAMIENTO TRMICO UNE-EN 14308:2011 Productos aislantes trmicos para equipos en edifcacin e instalaciones industriales. Productos manufacturados de es- puma rgida de poliuretano (PUR) y espuma de poliisocianu- rato (PIR). Especifcacin. Precio: 40,1 EUR AEN/CTN CLIMATIZACIN UNE-EN 378-1:2008+A1:2011 Sistemas de refrigeracin y bombas de calor. Requisitos de seguridad y medioambientales. Parte 1: Requisitos bsicos, defniciones, clasifcacin y criterios de eleccin (Sustituye a: UNE-EN 378-1:2008). Precio: 42,82 EUR UNE-EN 13313:2011 Sistemas de refrigeracin y bombas de calor. Competencia del personal (Sustituye a: UNE-EN 13313:2002). Precio: 29,33 EUR AEN/CTN ODONTOLOGA UNE-EN ISO 1942:2011 Odontologa. Vocabulario (ISO 1942:2009, Versin corregida 2010-03-01) (Sustituye a: UNE-EN ISO 1942:2010). Precio: 40,1 EUR AEN/CTN APARATOS Y DISPOSITIVOS MDICOS Y QUIRRGICOS UNE-EN 13623:2011 Antispticos y desinfectantes qumicos. Ensayo cuantitativo de suspensin para la evaluacin de la actividad bacterici- da contra la legionella de los desinfectantes qumicos para los sistemas acuosos. Mtodo de ensayo y requisitos (fase 2, etapa 1). Precio: 31,62 EUR UNE-EN ISO 8536-4:2011 Equipo de infusin para uso mdico. Parte 4: Equipos de in- fusin para un solo uso, de alimentacin por gravedad (ISO 8536-4:2010) (Sustituye a: UNE-EN ISO 8536-4:2007). Precio: 29,33 EUR UNE-EN ISO 9187-1:2011 Equipo de inyeccin para uso mdico. Parte 1: Ampollas para inyectables (ISO 9187-1:2010) (Sustituye a: UNE-EN ISO 9187-1:2008). Precio: 25,39 EUR UNE-EN ISO 9187-2:2011 Equipo de inyeccin para uso mdico. Parte 2: Ampollas de un punto de corte (OPC) (ISO 9187-2:2010) (Sustituye a: UNE- EN ISO 9187-2:2000). Precio: 25,39 EUR AEN/CTN TABACO Y PRODUCTOS DEL TABACO UNE-EN 16156:2011 Cigarrillos. Evaluacin de la tendencia a la ignicin. Requisi- tos de seguridad. Precio: 19,95 EUR UNE-EN ISO 12863:2011 Mtodo de ensayo normalizado para evaluar la tendencia a la ignicin de los cigarrillos (ISO 12683:2010). Precio: 29,33 EUR AEN/CTN ENVASES DE VIDRIO UNE-EN 15904:2011 Envases de vidrio. Tolerancias normalizadas para los frascos. Precio: 25,39 EUR 18 Normas Nacionales AEN/CTN PREFABRICADOS DE CEMENTO Y DE HORMIGN UNE-EN 15191:2011 Productos prefabricados de hormign. Clasifcacin de pres- taciones del hormign reforzado con fbra de vidrio. Precio: 25,39 EUR AEN/CTN EUROCDIGOS ESTRUCTURALES UNE-EN 1992-1-1:2010 ERRATUM:2011 Eurocdigo 2: Proyecto de estructuras de hormign. Parte 1-1: Reglas generales y reglas para edifcacin. Precio: Sin cargo UNE-EN 1994-1-2:2011 Eurocdigo 4: Proyecto de estructuras mixtas de acero y hor- mign. Parte 1-2: Reglas generales. Proyecto de estructuras sometidas al fuego (Sustituye a: UNE-ENV 1994-1-2:1996). Precio: 55,16 EUR UNE-EN 1996-1-1:2011 Eurocdigo 6: Proyecto de estructuras de fbrica. Parte 1-1: Re- glas generales para estructuras de fbrica armada y sin armar (Sustituye a: UNE-ENV 1996-1-3:2000, EN 1996-1-1:2005). Precio: 58,25 EUR AEN/CTN FERTILIZANTES, ENMIENDAS Y MEDIOS DE CULTIVO UNE-EN 15928:2011 Fertilizantes. Determinacin del grado de fneza de molienda (procedimiento seco). Precio: 19,95 EUR AEN/CTN DEPORTES. EQUIPAMIENTOS E INSTALACIONES DEPORTIVAS UNE-EN 15288-1:2009+A1:2011 Piscinas. Parte 1: Requisitos de seguridad para el diseo (Sustituye a: UNE-EN 15288-1:2009). Precio: 28,44 EUR AEN/CTN INGENIERA DEL AGUA UNE 149101:2011 Equipo de acondicionamiento de agua en el interior de los edifcios. Criterios bsicos de aptitud de equipos utilizados en el tratamiento del agua de consumo humano en el inte- rior de edifcios. Precio: 25,39 EUR AEN/CTN MANTENIMIENTO UNE-EN 13306:2011 Mantenimiento. Terminologa del mantenimiento (Sustituye a: UNE-EN 13306:2002). Precio: 29,33 EUR AEN/CTN LOGSTICA Y TRANSPORTE UNE-EN 14943:2011 Servicios de transporte. Logstica. Glosario de trminos (Sus- tituye a: EN 14943:2005). Precio: 61,12 EUR AEN/CTN BIOCOMBUSTIBLES SLIDOS UNE-EN 15210-2:2011 Biocombustibles slidos. Determinacin de la durabilidad mecnica de plets y briquetas. Parte 2: Briquetas (Sustituye a: UNE-CEN/TS 15210-2:2008 EX). Precio: 25,39 EUR AEN/CTN ACTIVIDADES DE INVESTIGACIN, DESARROLLO TECNOLGICO E INNOVACIN (I+D+I) UNE 166006:2011 Gestin de la I+D+i: Sistema de vigilancia tecnolgica e inte- ligencia competitiva (Sustituye a: UNE 166006:2006 EX). Precio: 25,39 EUR AEN/CTN INSPECCIN REGLAMENTARIA UNE 192000-1:2011 Aspectos comunes de las inspecciones reglamentarias. Parte 1: Caractersticas del inspector y desarrollo de las inspeccio- nes. Precio: 14,06 EUR AEN/CTN INFORMES DE ACTUACIONES PERICIALES UNE 197001:2011 Criterios generales para la elaboracin de informes y dict- menes periciales. Precio: 9,86 EUR AEN/CTN NORMAS BSICAS ELCTRICAS UNE-EN 60027-4:2011 Smbolos literales utilizados en electrotecnia. Parte 4: Mqui- nas elctricas rotativas (Sustituye a: UNE 21405-4:1995). Precio: 29,33 EUR UNE-EN 62402:2011 Gestin de la obsolescencia. Gua de aplicacin (Sustituye a: EN 62402: 2007). Precio: 34,72 EUR AEN/CTN APARAMENTA Y ACCESORIOS DE BAJA TENSIN EA 0042:2011 Aparamenta de baja tensin. Equipos auxiliares. Conjuntos de bloques de conexin para la verifcacin de contadores de energa. Precio: 25,39 EUR UNE-EN 60947-7-3:2011 Aparamenta de baja tensin. Parte 7-3: Equipos auxiliares. Requisitos de seguridad para bloques de conexin fusibles. Precio: 34,72 EUR AEN/CTN INSTALACIONES ELCTRICAS UNE-HD 60364-7-709:2011 Instalaciones elctricas de baja tensin. Parte 7-709: Requisi- tos para instalaciones o emplazamientos especiales. Marinas y emplazamientos anlogos. Precio: 28,44 EUR AEN/CTN EQUIPAMIENTO ELCTRICO Y SISTEMAS AUTOMTICOS PARA LA INDUSTRIA UNE-EN 50159:2011 Aplicaciones ferroviarias. Sistemas de comunicacin, sea- lizacin y procesamiento. Comunicacin relacionada con la seguridad en sistemas de transmisin. Precio: 42,82 EUR UNE-EN 50206-1:2011 Aplicaciones ferroviarias. Material rodante. Pantgrafos: Ca- ractersticas y ensayos. Parte 1: Pantgrafos para vehculos de lnea principal. Precio: 29,33 EUR 19 UNE-EN 50206-2:2011 Aplicaciones ferroviarias. Material rodante. Pantgrafos: Ca- ractersticas y ensayos. Parte 2: Pantgrafos para metros y ferrocarriles ligeros. Precio: 28,44 EUR UNE-EN 60974-11:2011 Equipos de soldadura elctrica por arco. Parte 11: Portae- lectrodos. Precio: 28,44 EUR UNE-EN 61508-1:2011 Seguridad funcional de los sistemas elctricos/electrnicos/ electrnicos programables relacionados con la seguridad. Parte 1: Requisitos generales. Precio: 42,82 EUR UNE-EN 61508-2:2011 Seguridad funcional de los sistemas elctricos/electr- nicos/electrnicos programables relacionados con la se- guridad. Parte 2: Requisitos para los sistemas elctricos/ electrnicos/electrnicos programables relacionados con la seguridad. Precio: 55,16 EUR UNE-EN 61508-3:2011 Seguridad funcional de los sistemas elctricos/electrnicos/ electrnicos programables relacionados con la seguridad. Parte 3: Requisitos del software. Precio: 61,12 EUR UNE-EN 61508-4:2011 Seguridad funcional de los sistemas elctricos/electrnicos/ electrnicos programables relacionados con la seguridad. Parte 4: Defniciones y abreviaturas. Precio: 31,62 EUR UNE-EN 61508-5:2011 Seguridad funcional de los sistemas elctricos/electrnicos/ electrnicos programables relacionados con la seguridad. Parte 5: Ejemplos de mtodos de determinacin de los nive- les de integridad de seguridad. Precio: 40,1 EUR UNE-EN 61508-6:2011 Seguridad funcional de los sistemas elctricos/electrnicos/ electrnicos programables relacionados con la seguridad. Parte 6: Directrices para la aplicacin de las Normas IEC 61508-2 e IEC 61508-3. Precio: 58,25 EUR UNE-EN 61508-7:2011 Seguridad funcional de los sistemas elctricos/electrnicos/ electrnicos programables relacionados con la seguridad. Parte 7: Presentacin de tcnicas y medidas. Precio: 64,43 EUR UNE-EN 50518-1:2011 Centro de supervisin y recepcin de alarmas. Parte 1: Requi- sitos de ubicacin y construccin. Precio: 28,44 EUR UNE-EN 50518-2:2011 Centro de supervisin y recepcin de alarmas. Parte 2: Re- quisitos tcnicos. Precio: 25,39 EUR UNE-EN 60745-1:2010/A11:2011 Herramientas manuales elctricas accionadas por motor elctrico. Seguridad. Parte 1: Requisitos generales. Precio: 9,86 EUR UNE-EN 60745-2-6:2011 Herramientas manuales elctricas accionadas por motor elctrico. Seguridad. Parte 2-6: Requisitos particulares para martillos. Precio: 29,33 EUR UNE-EN 60745-2-14:2010/A2:2011 Herramientas manuales elctricas accionadas por motor elctri- co. Seguridad. Parte 2-14: Requisitos particulares para cepillos. Precio: 25,39 EUR Gestin de la seguridad y salud en el trabajo segn OHSAS 18001. Actitudes y percepciones de empresas certifcadas Beatriz Fernndez Muiz, Jos Manuel Montes Pen, Agustn Snchez-Toledo Ledesma, Camilo Jos Vzquez Ords Presenta el primer estudio emprico realizado para conocer la opinin de las organizaciones que ya han implantado OHSAS 18001. Esta publicacin ofrece datos relevantes acerca de la satisfaccin de las empresas que ya han implantado OHSAS 18001 mediante el anlisis de las siguientes cuestiones: Por qu han elegido OHSAS 18001? Cules son los benefcios que han percibido al implantarlo? Qu obstculos han superado para obtener la certifcacin? Cmo identifcar las no conformidades que debilitan el sistema? Cules son sus actitudes y percepciones sobre el proceso de auditora? Cmo detectar los antecedentes del comportamiento ante el riesgo laboral? 2010 Rstica 17 x 24 cm 160 pginas 31,50 ISBN: 978-84-8143-714-0 Ms informacin: 902 102 201 - aenor.publicaciones@aenor.es - www.aenor.es ediciones 20 Normas Nacionales UNE-EN 60745-2-19:2010/A1:2011 Herramientas manuales elctricas accionadas por motor elctrico. Seguridad. Parte 2-19: Requisitos particulares para ensambladoras. Precio: 9,86 EUR UNE-EN 61029-1:2010/A11:2011 Seguridad de las mquinas herramientas elctricas semifjas. Parte 1: Requisitos generales. Precio: 9,86 EUR UNE-EN 61029-2-6:2011 Seguridad de las mquinas herramientas elctricas semifjas. Parte 2-6: Requisitos particulares para taladradoras de dia- mante con alimentacin de agua. Precio: 28,44 EUR AEN/CTN SEGURIDAD ELCTRICA UNE-EN 61230:2011 Trabajos en tensin. Equipos porttiles de puesta a tierra o de puesta a tierra y en cortocircuito. Precio: 42,82 EUR AEN/CTN LMPARAS Y EQUIPOS ASOCIADOS UNE-EN 60061-1:1996/A43:2011 Casquillos y portalmparas, junto con los calibres para el control de la intercambiabilidad y de la seguridad. Parte 1: Casquillos. (IEC 60061-1:1969/A37:2006). Precio: 29,33 EUR UNE-EN 60061-2:1996/A40:2011 Casquillos y portalmparas, junto con los calibres para el control de la intercambiabilidad y de la seguridad. Parte 2: Portalmparas. Precio: 29,33 EUR UNE-EN 60061-3:1997/A41:2011 Casquillos y portalmparas junto con los calibres para el control de la intercambiabilidad y de la seguridad. Parte 3: Calibres. Precio: 42,82 EUR UNE-EN 60598-2-20:2011 Luminarias. Parte 2-20: Requisitos particulares. Guirnaldas luminosas. Precio: 28,44 EUR UNE-EN 61184:2011 Portalmparas tipo bayoneta. Precio: 42,82 EUR UNE-EN 62493:2011 Evaluacin de los equipos de alumbrado en relacin a la ex- posicin humana a los campos electromagnticos. Precio: 34,72 EUR AEN/CTN TRANSPORTE Y DISTRIBUCIN DE ENERGA ELCTRICA UNE-EN 62271-205:2011 Aparamenta de alta tensin. Parte 205: Conjuntos compactos de aparamenta de tensiones asignadas superiores a 52 kV. Precio: 29,33 EUR AEN/CTN COMPATIBILIDAD ELECTROMAGNTICA UNE-EN 55011:2011 Equipos industriales, cientfcos y mdicos. Caractersticas de las perturbaciones radioelctricas. Lmites y mtodos de medicin. Precio: 40,1 EUR UNE-EN 50498:2011 Compatibilidad electromagntica (CEM). Norma de familia de productos para equipos electrnicos de piezas de recam- bio y accesorios para vehculos. Precio: 25,39 EUR UNE-EN 61000-4-3:2007/A2:2011 Compatibilidad electromagntica (CEM). Parte 4-3: Tcnicas de ensayo y de medida. Ensayos de inmunidad a los campos electromagnticos, radiados y de radiofrecuencia. Precio: 25,39 EUR UNE-EN 61000-4-18:2008/A1:2011 Compatibilidad electromagntica (CEM). Parte 4-18: Tcnicas de ensayo y de medida. Ensayo de inmunidad a la onda os- cilatoria amortiguada. Precio: 9,86 EUR AEN/CTN CABLES DE ENERGA ELCTRICA UNE-EN 60228:2005 ERRATUM:2011 Conductores de cables aislados. Precio: Sin cargo UNE-EN 60317-57:2011 Especifcaciones para tipos particulares de hilos para bobi- nas electromagnticas. Parte 57: Hilo de cobre de seccin circular esmaltado con poliamida-imida, clase 220. Precio: 25,39 EUR UNE-EN 60317-58:2011 Especifcaciones para tipos particulares de hilos para bobi- nas electromagnticas. Parte 58: Hilo de cobre de seccin rectangular esmaltado con poliamida-imida, clase 220. Precio: 25,39 EUR AEN/CTN ELECTRODOMSTICOS UNE-EN 50304:2010/A1:2011 Cocinas, encimeras de coccin, hornos y gratinadores elc- tricos para uso domstico. Mtodos de medida de la aptitud a la funcin. Precio: 9,86 EUR UNE-EN 60335-2-24:2011 Aparatos electrodomsticos y anlogos. Seguridad. Parte 2-24: Requisitos particulares para aparatos de refrigeracin, aparatos fabricadores de helados y fabricadores de hielo. Precio: 42,82 EUR AEN/CTN SISTEMAS DE SUMINISTRO DE ENERGA ELCTRICA UNE-EN 50160:2011 Caractersticas de la tensin suministrada por las redes gene- rales de distribucin. Precio: 31,62 EUR Servicio personalizado de actuacin referencial de normas y reglamentos que permite estar puntualmente informado de todos los cambios producidos en aquellas normas o disposiciones legislativas seleccionadas por el suscriptor: anulaciones, nuevas ediciones, revisiones, etc. INFORMACIN-DIFUSIN informacin 21 Normas Anuladas MARZO AEN/CTN VEHCULOS DE CARRETERA UNE 26353:1982 Inscripcin en curva. Defniciones y procedimiento de ensa- yo. UNE 26355:1981 Control del tiempo mnimo empleado partiendo de cero en recorrer 1 km y en alcanzar la velocidad mxima. UNE 26356:1988 Vehculos automviles. Prueba de aceleracin en vehculos automviles sobre terreno llano. UNE 26357:1981 Confrmacin de la posibilidad de marcha en pendiente. UNE 26358:1988 Vehculos automviles. Prueba de arrancabilidad en pen- diente. AEN/CTN INDUSTRIA DE CONSTRUCCIN Y REPARACIN NAVAL, ARTEFACTOS Y TECNOLOGA MARINA UNE-EN ISO 8729:1999 Embarcaciones y tecnologa marina. Refectores de radar marino. (ISO 8729:1997). AEN/CTN CONSTRUCCIN UNE 41951:1994 Chimeneas francesas. Medidas. UNE 41953:1997 Pavimentos elevados registrables. Instalacin y manteni- miento. AEN/CTN PLSTICOS Y CAUCHO UNE-EN 1555-2:2003 ERRATUM:2010 Sistemas de canalizacin en materiales plsticos para el su- ministro de combustibles gaseosos. Polietileno (PE). Parte 2: Tubos. AEN/CTN CELULOSA Y PAPEL UNE 57013:1982 Pastas. Determinacin de los extractos solubles en agua. UNE 57031:1971 Pastas para papel, papel y cartn. Preparacin de extractos acuosos. UNE 57039-2:1992 Pastas. Determinacin del ndice de viscosidad lmite de ce- lulosa en disoluciones diluidas. Parte 2: mtodo del comple- jo hierro (III) - tartrato sdico (EWNN mod NaCI). UNE 57070-1:1986 Papel. Caractersticas de los papeles para caras componentes del cartn ondulado. Papeles kraft y test liner. UNE 57070-2:1986 Papel. Caractersticas de los papeles para caras, componen- tes del cartn ondulado. Papeles biclase. UNE 57078:1974 Papel. Determinacin del PH superfcial de los papeles es- tucados. UNE 57083:1974 Papel. Cintas de papel, de uso en equipos de exploracin electrnica. UNE 57122:1982 Papel y cartn. Determinacin del contenido de cola. UNE 57134:1987 Papel y cartn. Preparacin de muestras impresas patrn para ensayos pticos. UNE 57147:1988 Papel y cartn. Determinacin de la resistencia a las grasas. (mtodo del aceite de palma). Norma UNE 71599-2:2010 Gestin de la continuidad del negocio. Parte 2: Especifcaciones Especifca los requisitos para implantar un sistema de gestin de la continuidad del negocio en cualquier empresa independientemente de su tamao y sector. Utiliza el ciclo PHVA (Planifcar-Hacer-Verifcar- Actuar) garantizando que la continuidad del negocio est gestionada de forma efcaz, adems de asegurar un alto grado de coherencia con otras normas de sistemas de gestin. 2010 - a4 - 27 pginas - 29,58 Ms informacin: 902 102 201 - aenor.publicaciones@aenor.es - www.aenor.es ediciones 22 Normas Nacionales AEN/CTN COMBUSTIBLES GASEOSOS E INSTALACIONES Y APARATOS DE GAS UNE 60002:1995 Clasifcacin de los combustibles gaseosos en familias. AEN/CTN ACEITES ESENCIALES Y PRODUCTOS COSMTICOS UNE 84154:2002 Aceites esenciales. Determinacin del ndice de ster, antes y despus acetilacin, y evaluacin del contenido en alcoholes libres y totales. UNE 84155:2002 Aceites esenciales. Determinacin del ndice de ster. AEN/CTN APARATOS Y DISPOSITIVOS MDICOS Y QUIRRGICOS UNE-EN ISO 10993-10:2009 ERRATUM:2010 Evaluacin biolgica de productos sanitarios. Parte 10: En- sayos de irritacin y de hipersensibilidad retardada (ISO 10993-10:2002, incluyendo Amd 1:2006). AEN/CTN TABACO Y PRODUCTOS DEL TABACO UNE 118010:2010 Cigarrillos. Determinacin de la nicotina retenida en el fltro. Mtodo analtico por cromatografa de gases. AEN/CTN APARAMENTA Y ACCESORIOS DE BAJA TENSIN UNE-EN 61242/A11:2004 Accesorios elctricos. Cordones prolongadores enrollados so- bre tambor para usos domsticos y anlogos. UNE-EN 61242:1998/A12:2007 Accesorios elctricos. Cordones prolongadores enrollados so- bre tambor para usos domsticos y anlogos. AEN/CTN EQUIPAMIENTO ELCTRICO Y SISTEMAS AUTOMTICOS PARA LA INDUSTRIA UNE-EN 50261:1999 Aplicaciones ferroviaras. Montaje de equipamientos electr- nicos. UNE-EN 60254-2/A1:2001 Bateras de traccin de plomo. Parte 2: Dimensiones de los elementos y de los bornes y marcado de la polaridad sobre los elementos. UNE-EN 60254-2:1997 Bateras de traccin de plomo. Parte 2: Dimensiones de los elementos y de los bornes y marcado de la polaridad sobre los elementos. AEN/CTN EQUIPOS ELECTRNICOS UNE-EN 60601-2-39:2000 Equipos electromdicos. Parte 2-39: Requisitos particulares para la seguridad de los equipos de dilisis peritoneal. UNE-EN 60738-1-1:2001 Termistores. Coefciente de temperatura de funcin escaln positivo de calentamiento directo. Parte 1-1: Especifcacin marco particular. Aplicacin para la limitacin de corriente. Nivel de aseguramiento EZ. UNE-EN 60738-1-2:2001 Termistores. Coefciente de temperatura de funcin escaln positivo de calentamiento directo. Parte 1-2: Especifcacin marco particular. Aplicacin a los elementos calefactores. Ni- vel de evaluacin EZ. UNE-EN 60738-1-3:2001 Termistores. Coefciente de temperatura de funcin escaln positivo de calentamiento directo. Parte 1-3: Especifcacin marco particular. Aplicacin a la corriente de irrupcin. Nivel de evaluacin EZ. UNE-EN 60738-1-4:2001 Termistores. Coefciente de temperatura de funcin escaln positivo de calentamiento directo. Parte 1-4: Especifcacin marco particular. Aplicacin a la medida de la temperatura. Nivel de evaluacin EZ. AEN/CTN CABLES DE ENERGA ELCTRICA EN 50264-1:2002 Aplicaciones ferroviarias. Cables con propiedades especiales ante el fuego (para material rodante ferroviario). Espesor normal. Parte 1: Requisitos generales (Ratifcada por AENOR en enero de 2003). Normas Ratifcadas ABRIL AEN/CTN GESTIN DEL TRFICO AREO EN 303212 V.1.1.1 (2010) Colaboracin en la Toma de Decisiones entre Aeropuertos (A-CDM). Especifcacin Comunitaria para aplicacin bajo la Regulacin de Interoperabilidad de Cielo nico Europeo CE 552/2004. 2010-06-01 EN 303213-1 V1.1.1 (2009) Sistema avanzado de control y gua del movimiento en su- perfcie (A-SMGCS). Parte 1: Especifcacin comunitaria para aplicacin bajo el Reglamento CE 552/2004, relativo a la in- teroperabilidad del cielo nico europeo, para A-SMGCS nivel 1, incluyendo las interfaces externas. 2009-09-25 EN 303213-1 V1.2.1 (2010) Sistema avanzado de control y gua del movimiento en su- perfcie (A-SMGCS). Parte 1: Especifcacin comunitaria para aplicacin bajo el Reglamento CE 552/2004, relativo a la in- teroperabilidad del cielo nico europeo, para A-SMGCS nivel 1, incluyendo las interfaces externas. 2010-07-01 23 EN 303213-2 V1.1.1 (2010) Sistema avanzado de control y gua del movimiento en superficie (A-SMGCS).Parte 2: Especificacin comunitaria para aplicacin bajo el Reglamento CE 552/2004 para A- SMGCS nivel 2, incluyendo las interfaces externas. 2010-10-21 EN 303213-3 V.1.1.1 (2010) Sistema Avanzado de Gua y Control de Movimientos de Su- perfcie (A-SMGCS) . Parte 3 : Especifcacin Comunitaria para aplicacin bajo la Regulacin de Interoperabilidad de Cielo nico Europeo CE 552/2004 para sensores cooperativos im- plantados incluyendo sus interfaces. 2010-10-21 EN 303213-4-1 V1.1.1 (2010) Sistema Avanzado de Gua y Control de Movimientos de Superfcie (A-SMGCS) . Parte 4 : Especifcacin Comunitaria para aplicacin bajo la Regulacin de Interoperabilidad de Cielo nico Europeo CE 552/2004 para sensores no coope- rativos implantados incluyendo sus interfaces . Subparte 1: Requisitos generales para sensores no cooperativos. 2010-10-21 EN 303213-4-2 V1.1.1 (2010) Sistema Avanzado de Gua y Control de Movimientos de Su- perfcie (A-SMGCS) . Parte 4 : Especifcacin Comunitaria para aplicacin bajo la Regulacin de Interoperabilidad de Cielo nico Europeo CE 552/2004 para sensores no cooperativos implantados incluyendo sus interfaces . Subparte 2: Requi- sitos especfcos para detectores de movimiento por radar implantados. 2010-10-21 EN 303214 V1.1.1 (2011) Sistema para Servicios de Enlace de Datos (DLS). Especif- cacin Comunitaria para aplicacin bajo la Regulacin de Interoperabilidad de Cielo nico Europeo EC 552/2004. Re- quisitos para componentes de tierra y ensayos del sistema. 2011-03-25 ETSI/TR 102579 V1.1.1 (2007) Aspectos de Compatibilidad Electromagntica y espectro de radiofrecuencia (ERM). Gua para la elaboracin de Especi- fcaciones Comunitarias para su aplicacin en el marco del Reglamento de Interoperabilidad del Cielo nico Europeo 552/2004. 2007-08-07 ETSI/TS 101842 V1.1.1 (2007) Aspectos de Compatibilidad Electromagntica y espectro de radiofrecuencia (ERM). Equipo radio de Enlace de Datos tie- rra/aire VHF (VDL) Modo 4. Caractersticas tcnicas y mtodos de medicin para equipos terrestres. Trazabilidad de los re- quisitos del componente VDL4 terrestres con el Reglamento de Interoperabilidad del Cielo nico Europeo 552/2004. 2007-05-15 AEN/CTN TELECOMUNICACIONES EN 300220-2 V2.3.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Dispositivos de Corto Alcance. Equipos radioelctricos utilizados en la gama de frecuencias de 25 MHz a 1 000 MHz con niveles de potencia que alcan- zan hasta 500 mW. Parte 2 Norma Europea (EN) armonizada, cubriendo los requisitos esenciales segn el artculo 3,2 de la Directiva RTTE. 2010-02-18 EN 300330-2 V1.3.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Dispositivos de Corto Alcance. Equipos radioelctricos en la gama de frecuencias de 9 KHz a 25MHz y sistemas de bucle inductivo en la gama de fre- cuencias de 9 KHz a 30 MHz. Parte 2: Norma Europea (EN) armonizada, cubriendo los requisitos esenciales segn el ar- tculo 3,2 de la Directiva RTTE. 2006-04-03 EN 300330-2 V1.5.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Dispositivos de Corto Alcance. Equipos radioelctricos en la gama de frecuencias de 9 KHz a 25MHz y sistemas de bucle inductivo en la gama de fre- cuencias de 9 KHz a 30 MHz. Parte 2: Norma Europea (EN) armonizada, cubriendo los requisitos esenciales segn el ar- tculo 3,2 de la Directiva RTTE. 2010-02-12 EN 301406 V1.5.1 Telecomunicaciones Inalmbricas Digitales Mejoradas (DECT); Norma Europea (EN) armonizada para Telecomuni- caciones Inalmbricas Digitales Mejoradas (DECT) cubriendo los requisitos esenciales segn el artculo 3,2 de la Directiva RTTE; Radiocomunicacin Genrica. EN 301406 V2.1.1 Telecomunicaciones Inalmbricas Digitales Mejoradas (DECT). Norma Europea (EN) armonizada para Telecomuni- caciones Inalmbricas Digitales Mejoradas (DECT) cubriendo los requisitos esenciales segn el artculo 3,2 de la Directiva RTTE. Radiocomunicacin Genrica. 2009-07-02 EN 301426 V1.1.1 Estaciones Terrenas y Sistemas de Satlite (SES). Norma Eu- ropea (EN) armonizada para estaciones terrenas mviles te- rrestres de satlite para baja velocidad de datos (LMES) que funcionan en la en las bandas de frecuencia de 1,5/1,6 GHz cubriendo los requisitos esenciales bajo el artculo 3.2 de la Directiva RTTE. 2000-05-01 EN 301426 V1.2.1 Estaciones Terrenas y Sistemas de Satlite (SES). Norma Europea (EN) armonizada para estaciones terrenas mviles terrestres de satlite para baja velocidad de datos (LMES) y estaciones mviles martimas de satlite (MMES) no destina- das a comunicaciones en situaciones de peligro y prevencin de accidentes, que funcionan en la en las bandas de frecuen- cia de 1,5/1,6 GHz cubriendo los requisitos esenciales bajo el artculo 3.2 de la Directiva RTTE. 2001-10-01 EN 301908-1 V2.2.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Estaciones de Base (BS), Repeti- dores y Equipos de usuario (UE) de redes celulares de Tercera Generacin IMT-2000. Parte 1. Norma Europea (EN) armo- nizada para IMT-2000, introduccin y requisitos comunes, cubriendo los requisitos esenciales segn el artculo 3,2 de la directiva RTTE. EN 301908-1 V.4.2.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Estaciones de Base (BS), Repeti- dores y Equipos de usuario (UE) de redes celulares de Tercera Generacin IMT-2000. Parte 1. Norma Europea (EN) armo- nizada para IMT-2000, introduccin y requisitos comunes, cubriendo los requisitos esenciales segn el artculo 3,2 de la directiva RTTE. 2010-03-01 24 Normas Nacionales EN 301908-10 V4.1.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Estaciones de Base (BS), Repeti- dores y Equipos de usuario (UE) de redes celulares de Ter- cera Generacin IMT-2000. Parte 10: Norma Europea (EN) armonizada para IMT-2000. FDMA/TDMA (DECT) cubriendo los requisitos esenciales segn el artculo 3,2 de la Directiva RTTE. 2009-07-06 EN 301908-11 V4.2.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Estaciones de Base (BS), Repeti- dores y Equipos de usuario (UE) de redes celulares de Tercera Generacin IMT-2000. Parte 11: Norma Europea (EN) armo- nizada para IMT-2000, CDMA con espectro ensanchado de secuencia directa (UTRA FDD y E-UTRA FDD) (Repetidores), cubriendo los requisitos esenciales segn el artculo 3,2 de la Directiva RTTE. 2010-03-01 EN 301908-12 V3.1.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Estaciones de Base (BS), Repeti- dores y Equipos de usuario (UE) de redes celulares de Tercera Generacin IMT-2000. Parte 12: Norma Europea (EN) armo- nizada para IMT-2000, CDMA Multi-portadora (CDMA 2000) (Repetidores), cubriendo los requisitos esenciales segn el artculo 3,2 de la Directiva RTTE. 2008-04-30 EN 301908-12 V4.2.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Estaciones de Base (BS), Repeti- dores y Equipos de usuario (UE) de redes celulares de Tercera Generacin IMT-2000. Parte 12: Norma Europea (EN) armo- nizada para IMT-2000, CDMA Multi-portadora (CDMA 2000) (Repetidores), cubriendo los requisitos esenciales segn el artculo 3,2 de la Directiva RTTE. 2010-03-05 EN 301908-13 V4.2.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Estaciones de Base (BS), Repeti- dores y Equipos de usuario (UE) de redes celulares de Tercera Generacin IMT-2000. Parte 13: Norma Europea (EN) armo- nizada para IMT-2000, Acceso Radio Terrestre Universal Evo- lucionado (E-UTRA) (UE), cubriendo los requisitos esenciales segn el artculo 3,2 de la Directiva RTTE. 2010-03-01 EN 301908-14 V4.2.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Estaciones de Base (BS), Repeti- dores y Equipos de usuario (UE) de redes celulares de Ter- cera Generacin IMT-2000. Parte 14: Norma Europea (EN) armonizada para IMT-2000, Acceso Radio Terrestre Univer- sal Evolucionado (E-UTRA) (BS), cubriendo los requisitos esenciales segn el artculo 3,2 de la Directiva RTTE. 2010-03-01 EN 301908-15 V4.2.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Estaciones de Base (BS), Repeti- dores y Equipos de usuario (UE) de redes celulares de Ter- cera Generacin IMT-2000. Parte 15: Norma Europea (EN) armonizada para IMT-2000, Acceso Radio Terrestre Universal Evolucionado (E-UTRA) (Repetidores FDD), cubriendo los re- quisitos esenciales segn el artculo 3,2 de la Directiva RTTE. 2010-03-01 EN 301908-16 V4.2.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Estaciones de Base (BS), Repetidores y Equipos de usuario (UE) de redes celulares de Tercera Genera- cin IMT-2000. Parte 16: Norma Europea (EN) armonizada para IMT-2000, CDMA Multi-portadora Evolucionado Banda ancha Ultra Mvil (UMB) (UE) cubriendo los requisitos esenciales se- gn el artculo 3,2 de la Directiva RTTE. 2010-03-05 EN 301908-17 V4.2.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Estaciones de Base (BS), Repeti- dores y Equipos de usuario (UE) de redes celulares de Tercera Generacin IMT-2000. Parte 17: Norma Europea (EN) armo- nizada para IMT-2000, CDMA Multi-portadora Evolucionado Banda ancha Ultra Mvil (UMB) (BS) cubriendo los requisitos esenciales segn el artculo 3,2 de la Directiva RTTE. 2010-03-05 EN 302561 V1.2.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Servicio mvil terrestre. Equipos de radiocomunicaciones usando modulacin de envolvente constante o no constante, funcionando en un ancho de ban- da da canal de 25 kHz, 50 kHZ, 100 kHz o 150 kHz. Norma Eu- ropea (EN) armonizada, cubriendo los requisitos esenciales segn el artculo 3,2 de la DIrectiva RTTE 2009-12-03 EN 302645 V1.1.1 Cuestiones de Compatibilidad Electromagntica y Espectro de Radiofrecuencia (ERM). Dispositivos de corto alcance. Re- petidores para el Sistema Global de Navegacin por Satlite (GNSS). Norma Europea (EN) armonizada, cubriendo los re- quisitos esenciales segn el artculo 3,2 de la Directiva RTTE. 2010-03-18 ETSI/TR 103065 V1.1.1 (2010) Comunicaciones aeronuticas. Clasifcacin de los parmetros de RF de equipos radio terrestres para la Gestin del Trfco Areo regulados por la Directiva RTTE o por la Reglamentacin de Interoperabilidad del Cielo nico Europeo. 2010-12-03 AEN/CTN TECNOLOGAS DE LA INFORMACIN Y LAS COMUNICACIONES PARA LA SALUD EN ISO 11073-10404:2011 Informtica sanitaria. Comunicaciones con dispositivos sanitarios de punto de asistencia. Parte 10404: Especializacin de dispositi- vos. Pulsioxmetro (ISO/IEEE 11073-10404:2010). 2011-03-16 EN ISO 11073-10407:2011 Informtica sanitaria. Comunicaciones con dispositivos sani- tarios de punto de asistencia. Parte 10407: Especializacin de dispositivos. Monitor de presin sangunea (ISO/IEEE 11073- 10407:2010). 2011-03-16 EN ISO 11073-10408:2011 Informtica sanitaria. Comunicaciones con dispositivos sani- tarios de punto de asistencia. Parte 10408: Especializacin de dispositivos. Termmetro (ISO/IEEE 11073-10408:2010). 2011-03-16 EN ISO 11073-10415:2011 Informtica sanitaria. Comunicaciones con dispositivos sani- tarios de punto de asistencia. Parte 10415: Especializacin de dispositivos. Balanza (ISO/IEEE 11073-10415:2010). 2011-03-16 25 EN ISO 11073-10417:2011 Informtica sanitaria. Comunicaciones con dispositivos sani- tarios de punto de asistencia. Parte 10417: Especializacin de dispositivos. Glucmetro (ISO/IEEE 11073-10417:2010). 2011-03-16 EN ISO 11073-10471:2011 Informtica sanitaria. Comunicaciones con dispositivos sani- tarios de punto de asistencia. Parte 10471: Especializacin de dispositivos. Centro de actividad para la vida independiente (ISO/IEEE 11073-10471:2010). 2011-03-16 EN ISO 11073-20601:2011 Informtica sanitaria. Comunicaciones con dispositivos sani- tarios de punto de asistencia. Parte 20601: Archivos de apli- cacin. Protocolo para el intercambio optimizado (ISO/IEEE 11073-20601:2010). 2011-03-16 AEN/CTN MQUINAS-HERRAMIENTA EN 12413:2007+A1:2011 Requisitos de seguridad para los productos abrasivos aglo- merados. (Sustituye a: EN 12413:2007). 2011-03-09 AEN/CTN NORMAS BSICAS ELCTRICAS EN 61360-1:2010 Tipos normalizados de elementos de datos con plan de cla- sifcacin para componentes elctricos. Parte 1: Defniciones. Principios y mtodos. 2010-05-21 EN 81346-1:2009 Sistemas industriales, instalaciones y equipos y productos industriales. Principios de estructuracin y designacin de referencia. Parte 1: Reglas bsicas. 2009-10-09 EN 61340-5-1:2007 Electrosttica. Parte 5-1: Proteccin de componentes electr- nicos frente al fenmeno electrosttico. Requisitos genera- les. (Sustituye a: UNE-EN 61340-5-1:2002UNE-EN 61340-5-1 CORR:2004) 2007-10-31 AEN/CTN EQUIPAMIENTO ELCTRICO Y SISTEMAS AUTOMTICOS PARA LA INDUSTRIA EN 61803:1999/A1:2010 Determinacin de las prdidas de potencia de las estaciones de conversin en corriente continua de alta tensin (CCAT). 2010-12-10 EN 60143-4:2010 Condensadores serie destinados a ser instalados en redes. Parte 4: Condensadores serie controlados por tiristores. 2010-12-17 EN 60534-7:2010 Vlvulas de regulacin de procesos industriales. Parte 7: Hoja de datos de vlvulas de regulacin. 2010-12-10 EN 60770-2:2010 Transmisores utilizados en los sistemas de control de pro- cesos industriales. Parte 2: Mtodos de inspeccin y ensayo individual. 2010-12-10 AEN/CTN PRODUCCIN DE ENERGA ELCTRICA EN 60684-3-283:2011 Fundas fexibles aislantes. Parte 3: Especifcaciones parti- culares para tipos especfcos de fundas. Hoja 283: Fundas termorretrctiles de poliolefna para asilamiento de lnea de bus. 2011-01-07 AEN/CTN TRANSPORTE Y DISTRIBUCIN DE ENERGA ELCTRICA EN 60255-151:2009 Rels de medida y equipos de proteccin. Parte 151: Norma funcional para proteccin de sobreintensidades y subinten- sidades. 2009-10-23 AEN/CTN EQUIPOS ELECTRNICOS EN 61094-2:2009 Electroacstica. Micrfonos de medida. Parte 2: Mtodo pri- mario para la calibracin en presin de micrfonos patrones de laboratorio por la tcnica de la reciprocidad. 2009-04-16 EN 60747-16-4:2004/A1:2011 Dispositivos de semiconductores. Parte 16-4: Circuitos inte- grados de microondas. Interruptores. 2011-01-14 EN 61984:2009 Conectores. Requisitos de seguridad y ensayos. 2009-06-26 EN 60122-3:2010 Unidades de cristal de cuarzo de calidad asegurada. Parte 3: Contornos y conexiones de plomo normalizados. 2010-12-10 EN 60601-2-52:2010 Equipos electromdicos. Parte 2-52: Requisitos particulares para la seguridad bsica y funcionamiento esencial de las camas de hospital. 2010-04-09 EN ISO 11990-2:2010 Lseres y equipos asociados a los lseres. Determinacin de la resistencia al lser de los tubos traqueales. Parte 2: Man- guitos de tubos traqueales. 2010-07-15 AEN/CTN ASPECTOS ELCTRICOS DE LAS TELECOMUNICACIONES EN 61162-1:2011 Materiales y sistemas de navegacin y de radiocomunicacin martimos. Interfaces digitales. Parte 1: Emisor nico y recep- tores mltiples. 2011-01-07 EN 62287-1:2011 Equipos y sistemas de navegacin y radiocomunicacin ma- rtima. Equipo de transporte martimo clase B del Sistema de Identifcacin Automtica (AIS). Parte 1: Tcnicas de acce- so mltiple por divisin del tiempo sensible a la portadora (CSTDMA). 2011-01-07 AEN/CTN CABLES DE ENERGA ELCTRICA EN 50483-1:2009 Requisitos de ensayo para accesorios de redes areas trenza- das de baja tensin. Parte 1: Generalidades. 2009-01-30 EN 50483-2:2009 Requisitos de ensayo para accesorios de redes areas trenza- das de baja tensin. Parte 2: Pinzas de amarre y de suspen- sin para redes autosoportadas. 2009-01-30 EN 50483-3:2009 Requisitos de ensayo para accesorios de redes areas trenza- das de baja tensin. Parte 3: Pinzas de amarre y de suspen- sin para redes con neutro fador. 2009-01-30 EN 50483-4:2009 Requisitos de ensayo para accesorios de redes areas trenza- das de baja tensin. Parte 4: Conectores. 2009-01-30 26 Normas Nacionales EN 50483-5:2009 Requisitos de ensayo para accesorios de redes areas tren- zadas de baja tensin. Parte 5: Ensayo de envejecimiento elctrico. 2009-01-30 EN 50483-6:2009 Requisitos de ensayo para accesorios de redes areas trenza- das de baja tensin. Parte 6: Ensayos ambientales. 2009-01-30 AEN/CTN CABLES DE TELECOMUNICACIONES Y FIBRA PTICA EN 61169-14:2010 Conectores de radiofrecuencia. Parte 14: Conectores coaxia- les R. F. con dimetro interior del conductor exterior de 12 mm con acoplamiento roscado. Impedancia caracterstica 75 ohmios (tipo 3.5/12). 2010-12-10 AEN/CTN MATERIAL AEROESPACIAL EN 2240-051:2011 Material aeroespacial. Lmparas de incandescencia. Parte 051: Lmpara, cdigo 1163. Norma de producto. 2011-02-23 EN 2240-052:2011 Material aeroespacial. Lmparas de incandescencia. Parte 052: Lmpara, cdigo 1222. Norma de producto. 2011-03-02 EN 2240-053:2011 Material aeroespacial. Lmparas de incandescencia. Parte 053: Lmpara, cdigo 1308. Norma de producto. 2011-03-02 EN 2240-054:2011 Material aeroespacial. Lmparas de incandescencia. Parte 054: Lmpara, cdigo 1317. Norma de producto. 2011-03-02 EN 2240-055:2011 Material aeroespacial. Lmparas de incandescencia. Parte 055: Lmpara, cdigo 1495. Norma de producto. 2011-03-02 EN 2240-056:2011 Material aeroespacial. Lmparas de incandescencia. Parte 056: Lmpara, cdigo 1506. Norma de producto. 2011-03-02 EN 2240-057:2011 Material aeroespacial. Lmparas de incandescencia. Parte 057: Lmpara, cdigo 1512. Norma de producto. 2011-03-02 EN 2240-058:2011 Material aeroespacial. Lmparas de incandescencia. Parte 058: Lmpara, cdigo 1524. Norma de producto. 2011-03-02 EN 2240-059:2011 Material aeroespacial. Lmparas de incandescencia. Parte 059: Lmpara, cdigo 1591. Norma de producto. 2011-03-02 EN 2240-060:2011 Material aeroespacial. Lmparas de incandescencia. Parte 060: Lmpara, cdigo 1619. Norma de producto. 2011-03-02 EN 2826:2011 Material aeroespacial. Comportamiento frente al fuego de los materiales no metlicos bajo la infuencia de calor radiante y llamas. Determinacin de los componentes de los gases en el humo. 2011-02-23 EN 4660-001:2011 Material aeroespacial. Arquitecturas avinicas modulares y abiertas. Parte 001: Arquitectura. 2011-02-23 EN 4660-002:2011 Material aeroespacial. Arquitecturas avinicas modulares y abiertas. Parte 002: Mdulos funcionales comunes (CFM). 2011-02-23 EN 4660-003:2011 Material aeroespacial. Arquitecturas avinicas modulares y abiertas. Parte 003: Comunicaciones/Red. 2011-02-23 EN 4660-004:2011 Material aeroespacial. Arquitecturas avinicas modulares y abiertas. Parte 004: Embalaje. 2011-02-23 AEN/CTN TECNOLOGA DE LA INFORMACIN EN 13710:2011 Reglas europeas de ordenacin. Ordenacin de caracteres de los alfabetos latino, griego, cirlico, georgiano y armenio. 2011-03-16 AEN/CTN AISLAMIENTO TRMICO EN 14707:2005+A1:2007 Productos aislantes trmicos para equipamiento de edifca- cin e instalaciones industriales. Determinacin de la tempe- ratura mxima de servicio para canalizaciones preformadas. (Sustituye a: EN 14707:2005) 2007-12-05 Calidad ambiental en interiores Un manual con 32 normas UNE que le ayudarn a adecuar las condiciones ambientales e higinico- sanitarias que se dan en el interior de los edifcios, al usuario y a la actividad que realiza Permiten: 1. Evaluar la calidad ambiental de un edifcio. 2. Adoptar buenas prcticas en las operaciones de limpieza. 3. Aplicar las estrategias de muestreo ms adecuadas para determinar la emisin en el aire de componentes dainos para la salud. 4. Establecer acciones correctoras efcaces. Adems, incluye normas sobre salas limpias imprescindibles para la industria aeroespacial, alimentaria, farmacutica, sanitaria o de la microelectrnica, por ser sectores que realizan actividades altamente sensibles a los ambientes contaminados. 2010 CD-ROM - 46,8 Ms informacin: 902 102 201 - aenor.publicaciones@aenor.es - www.aenor.es ediciones Normas Internacionales 27 ISO 22900-2:2009/CD Amd 1 Road vehicles Modular vehicle communication interface (MVCI) Part 2: Diagnostic protocol data unit application programming interface (D-PDU API) Amendment 1 ISO/CD 16121-1 Road vehicles Ergonomic requirements for the drivers workplace in line-service buses Part 1: General description, basic requirements ISO/CD 21308-5 Road vehicles - Product data exchange between chassis and body work manufacturers (BEP) Part 5: Coding of loader crane bodywork TC 34 FOOD PRODUCTS ISO/CD 16140-1 Microbiology of food and animal feeding stuffs Method validation Part 1: Terminology of method validation ISO/CD 16140-2 Microbiology of food and animal feeding stuffs Method validation Part 2: Protocol for the validation of proprietary methods against a reference method TC 41 PULLEYS AND BELTS (INCLUDING VEEBELTS) ISO/CD 17396 Synchronous belt drives Metric pitch Tooth profles T and AT endless and open ended belts and pulleys TC 46 INFORMATION AND DOCUMENTATION ISO/CD 25964-2 Information and documentation Thesauri and interopera- bility with other vocabularies Part 2: Interoperability with other vocabularies TC 54 ESSENTIAL OILS ISO/CD 10115 Oil of tarragon (Artemisia dracunculus L.), French type TC 58 GAS CYLINDERS ISO/DTR 16115 Gas cylinders - Provisions for manufacturing imperfections for seamless steel and aluminium alloy gas cylinders ISO/CD 11623 Transportable gas cylinders Periodic inspection and testing of composite gas cylinders TC 61 PLASTICS ISO/CD 75-1 Plastics Determination of temperature of defection under load Part 1: General test method ISO/CD 75-2 Plastics Determination of temperature of defection under load Part 2: Plastics and ebonite ISO/CD 30021 Fire safety Intermediate-scale fre-resistance tests Tests for fbre-reinforced polymer composites TC 69 APPLICATIONS OF STATISTICAL METHODS ISO/CD 16269-6 Statistical interpretation of data Part 6: Determination of statistical tolerance intervals Anteproyectos (CD Registered) Registrados en la Secretara Central entre el 1 y el 31 de marzo de 2011. Estos documentos estn actualmente sometidos a con- sideraciones en los comits tcnicos correspondientes. (*) Actualmente disponibles slo en ingls. ISO REMCO COMMITTEE ON REFERENCE MATERIALS ISO/DTR 11773 Global distribution of reference materials TC 2 FASTENERS ISO/CD 14581 Fasteners Hexalobular socket countersunk fat head screws ISO/CD 14582 Fasteners Hexalobular socket countersunk fat head screws, high head TC 8 SHIPS AND MARINE TECHNOLOGY ISO/CD 30004 Ship recycling management systems Guidelines for imple- menting ISO 30000 ISO/CD 16554 Ships and marine technology Protecting marine ecosystem from underwater irradiated noise Measurement and re- porting of underwater sound radiating from merchant ships TC 10 TECHNICAL PRODUCT DOCUMENTATION ISO/CD 14084-1 Process diagrams for power plants Part 1: Specifcation for diagrams TC 17 STEEL ISO/CD 377 Steel and steel products Location and preparation of sam- ples and test pieces for mechanical testing ISO/CD 404 Steel and steel products General technical delivery requi- rements ISO/CD 10474 Steel and steel products Inspection documents TC 20 AIRCRAFT AND SPACE VEHICLES ISO/CD 14222 Space environment (natural and artifcial) - Earth atmosphe- re density above 120 km TC 22 ROAD VEHICLES ISO/CD 11992-4 Road vehicles Interchange of digital information on electri- cal connections between towing and towed vehicles Part 4: Diagnostics 28 Normas Internacionales TC 135 NON-DESTRUCTIVE TESTING ISO/DTR 16829 Non-destructive testing Automated ultrasonic testing Selection and application of systems TC 146 AIR QUALITY ISO/CD 16911-1 Stationary source emissions Determination of velocity and volumetric fow in ducts Part 1: Manual method ISO/CD 16911-2 Stationary source emissions Determination of velocity and vo- lumetric fow in ducts Part 2: Automated measuring systems TC 147 WATER QUALITY ISO/CD 14189 Water quality Detection and enumeration of Clostridium perfringens Method using membrane fltration TC 149 CYCLES ISO/CD 8098 Cycles Safety requirements for bicycles for young children TC 150 IMPLANTS FOR SURGERY ISO/CD 15309 Implants for surgery - Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices TC 192 GAS TURBINES ISO/CD 19859 Gas turbine applications Requirements for power generation TC 198 STERILIZATION OF HEALTH CARE PRODUCTS ISO/DTS 13004 Sterilization of health care products - Radiation - Substantia- tion of selected sterilization doses: Method VDmaxSD TC 204 INTELLIGENT TRANSPORT SYSTEMS ISO/CD 22839 Intelligent Transport System - Forward Vehicle Collision Mi- tigation Systems - Operation, Performance, and Verifcation Requirements TC 205 BUILDING ENVIRONMENT DESIGN ISO/CD 13612-1 Heating and cooling systems in buildings Method for cal- culation of the system performance and system design for heat pump systems Part 1: Design and dimensioning ISO/CD 13612-2 Heating and cooling systems in buildings Method for cal- culation of the system performance and system design for heat pump systems Part 2: Energy calculation ISO/CD 13675 Heating systems in buildings - Method for calculation of the system performance and system design - Combustion sys- tems (boilers) TC 206 FINE CERAMICS ISO/CD 14605 Fine Ceramics (Advanced ceramics, advanced technical ce- ramics) Light source for testing semiconducting photoca- talytic materials used under indoor lighting environment ISO/CD 2859-4 Sampling procedures for inspection by attributes Part 4: Procedures for assessment of declared quality levels ISO/CD 3951-2 Sampling procedures for inspection by variables Part 2: General specifcation for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of in- dependent quality characteristics ISO/DTR 13587 Three statistical approaches for the assessment and interpre- tation of measurement uncertainty TC 71 CONCRETE, REINFORCED CONCRETE AND PRE-STRESSED CONCRETE ISO/CD 16204 Durability Service life design of concrete structures TC 106 DENTISTRY ISO/CD 1797-3 Dentistry Diamond rotary instruments Part 3: Shanks made of ceramics ISO/CD 9173-3 Dentistry Extraction forceps Part 3: Design and dimen- sions ISO 13397-2:2005/CD Amd 1 Dentistry Periodontal curettes, dental scalers and excava- tors Part 2: Periodontal curettes of Gr-type Amendment 1: Colour coding TC 108 MECHANICAL VIBRATION, SHOCK AND CONDITION MONITORING ISO/DTR 10687 Mechanical vibration-- Description and determination of seated postures with reference to whole-body vibration TC 121 ANAESTHETIC AND RESPIRATORY EQUIPMENT ISO/CD 5367 Anaesthetic and respiratory equipment Breathing circuits and connectors ISO/CD 27427 Anaesthetic and respiratory equipment Nebulizing systems and components IEC/CD 60601-1-2 Medical Electrical Equipment Part 1-2: General require- ments for basic safety and essential performance Collate- ral Standard: Requirements for medical electrical equipment and medical electrical systems used in the emergency medi- cal services environment IEC/CD 60601-1-12 Medical Electrical Equipment Part 1-12: General require- ments for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the emergency medi- cal services environment TC 126 TOBACCO AND TOBACCO PRODUCTS ISO/CD 13110 Cigarettes Determination of menthol in smoke condensa- tes Gas-chromatographic method 29 TC 10 TECHNICAL PRODUCT DOCUMENTATION IEC/DIS 82079-1 Preparation of instructions for use Structuring, content and presentation Part 1: General principles and detailed requi- rements 2011-08-05 TC 17 STEEL ISO/DIS 683-1 Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering (Revi- sion of ISO 683-1:1987) 2011-08-24 ISO/DIS 683-2 Heat-treatable steels, alloy steels and free-cutting steels Part 2: Alloy steels for quenching and tempering (Revision of ISO 683-1:1987) 2011-08-24 ISO/DIS 683-11 Heat-treatable steels, alloy steels and free-cutting ste- els Part 11: Case-hardening steels (Revision of ISO 683- 11:1987) 2011-08-24 TC 20 AIRCRAFT AND SPACE VEHICLES ISO/DIS 11104 * Space data and information transfer systems Time code formats (Revision of ISO 11104:2003) 2011-08-05 ISO/DIS 17214 * Space data and information transfer systems Spacecraft onboard interface services Time access service 2011-08-05 TC 21 EQUIPMENT FOR FIRE PROTECTION AND FIRE FIGHTING ISO/DIS 7240-10 Fire detection and alarm systems Part 10: Point-type fame detectors (Revision of ISO 7240-10:2007) 2011-08-23 ISO/DIS 7240-23 Fire detection and alarm systems Part 23: Visual alarm de- vices 2011-08-29 TC 22 ROAD VEHICLES ISO/DIS 14451-1 * Pyrotechnic articles Pyrotechnic articles for vehicles Part 1: Terminology 2011-08-18 ISO/DIS 14451-2 * Pyrotechnic articles Pyrotechnic articles for vehicles Part 2: Test methods 2011-08-18 ISO/DIS 14451-3 * Pyrotechnic articles Pyrotechnic articles for vehicles Part 3: Labelling 2011-08-18 ISO/DIS 14451-4 * Pyrotechnic articles Pyrotechnic articles for vehicles Part 4: Requirements for micro gas generators 2011-08-18 ISO/DIS 14451-5 * Pyrotechnic articles Pyrotechnic articles for vehicles Part 5: Requirements for airbag gas generators 2011-08-18 ISO/DIS 14451-6 * Pyrotechnic articles Pyrotechnic articles for vehicles Part 6: Requirements for airbag modules 2011-08-18 ISO/CD 14610 Fine Ceramics (Advanced ceramics, advanced technical cera- mics) Test method for fexural strength of porous ceramics at room temperature TC 207 ENVIRONMENTAL MANAGEMENT ISO/CD 14067 Carbon footprint of products JTC 1 INFORMATION TECHNOLOGY ISO/IEC CD 15067-2 Information technology Home Electronic Systems (HES) application model Part 2: Lighting model for HES ISO/IEC CD 29401-1 Information technology - Centralized Management Protocol (CMP) for Ubiquitous Home Network Services Part 1: Re- mote Management of Residential Gateways ISO/IEC CD 29401-2 Information technology - Centralized Management Protocol (CMP) for Ubiquitous Home Network Services Part 2: Re- mote Management of Application Servers ISO/IEC CD 29401-3 Information technology - Centralized Management Protocol (CMP) for Ubiquitous Home Network Services Part 3: Re- mote Management of User Terminals ISO/IEC CD 23007-2 Information technology Rich media user interfaces Part 2: Advanced user interaction (AUI) interfaces Proyectos de Normas (DIS Circulated) Periodo comprendido entre el 1 y el 31 de marzo de 2011. Estos documentos han obtenido un consenso en el seno de sus comits correspondientes y se han sometido a los organismos miembros para su votacin antes de la fecha indicada. (*) Actualmente disponibles slo en ingls. Fecha lmite de voto TC 2 FASTENERS ISO/DIS 10683 * Fasteners Non-electrolytically applied zinc fake coatings (Revision of ISO 10683:2000) 2011-08-25 TC 8 SHIPS AND MARINE TECHNOLOGY ISO/DIS 16437 * Ships and marine technology - Lifesaving and fre protection Atmospheric oil mist detectors 2011-08-23 ISO/IEC/IEEE DIS 80005-1 * Cold ironing Part 1: High Voltage Shore Connection (HVSC) Systems General requirements (Revision of IEC/PAS 60092- 510:2009) 2011-08-05 30 Normas Internacionales ISO/DIS 14451-7 * Pyrotechnic articles Pyrotechnic articles for vehicles Part 7: Requirements for seatbelt pretensioners 2011-08-18 ISO/DIS 14451-8 * Pyrotechnic articles Pyrotechnic articles for vehicles Part 8: Requirements for igniters 2011-08-18 ISO/DIS 14451-9 * Pyrotechnic articles Pyrotechnic articles for vehicles Part 9: Requirements for actuators 2011-08-18 ISO/DIS 14451-10 * Pyrotechnic articles Pyrotechnic articles for vehicles Part 10: Requirements for semi finished assemblies 2011-08-18 TC 23 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY ISO/DIS 6533 * Forestry machinery Portable chain-saw front hand-guard Dimensions and clearances (Revision of ISO 6533:2001) 2011-08-26 TC 24 PARTICLE CHARACTERIZATION INCLUDING SIEVING ISO/DIS 13322-1 * Particle size analysis Image analysis methods Part 1: Sta- tic image analysis methods (Revision of ISO 13322-1:2004) 2011-08-05 TC 34 FOOD PRODUCTS ISO/DIS 5530-1 * Wheat four Physical characteristics of doughs Part 1: De- termination of water absorption and rheological properties using a farinograph (Revision of ISO 5530-3:1988, ISO 5530- 1:1997) 2011-08-15 ISO/DIS 5530-2 * Wheat four Physical characteristics of doughs Part 2: De- termination of rheological properties using an extensograph (Revision of ISO 5530-2:1997) 2011-08-15 TC 35 PAINTS AND VARNISHES ISO/DIS 11997-2 * Paints and varnishes Determination of resistance to cyclic corrosion conditions Part 2: Wet (salt fog)/dry/humidity/UV light (Revision of ISO 11997-2:2000) 2011-08-04 ISO/DIS 15110 * Paints and varnishes Artifcial weathering including acidic deposition 2011-09-01 ISO/DIS 13632 Binders for paints and varnishes Rosin Sampling and sample preparation for colour measurement 2011-08-25 TC 37 TERMINOLOGY AND OTHER LANGUAGE AND CONTENT RESOURCES ISO/DIS 22274 * Systems to manage terminology, knowledge and content Concept-related aspects for developing and internationali- zing classifcation systems 2011-08-19 TC 38 TEXTILES ISO/DIS 105-B02.2 * Textiles Tests for colour fastness Part B02: Colour fast- ness to artifcial light: Xenon arc fading lamp test (Revision of ISO 105-B02:1994, ISO 105-B02:1994/Amd 1:1998, ISO 105- B02:1994/Amd 2:2000) 2011-05-11 TC 43 ACOUSTICS ISO/DIS 17497-2 * Acoustics Sound-scattering properties of surfaces Part 2: Measurement of the directional diffusion coeffcient in a free feld 2011-08-08 TC 44 WELDING AND ALLIED PROCESSES ISO/DIS 14732 * Welding personnel Qualifcation testing of welding opera- tors for fully mechanized welding and weld setters for fully mechanized welding and automatic welding of metallic ma- terials (Revision of ISO 14732:1998) 2011-08-25 TC 45 RUBBER AND RUBBER PRODUCTS ISO/DIS 18752 Rubber hoses and hose assemblies Wire- or textile-reinfor- ced single-pressure types for hydraulic applications Spe- cifcation (Revision of ISO 18752:2006, ISO 18752:2006/Amd 1:2010) 2011-08-22 ISO/DIS 1431-1 * Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing (Revision of ISO 1431-1:2004, ISO 1431-1:2004/Amd 1:2009) 2011-08-19 ISO/DIS 3387 * Rubber Determination of crystallization effects by hardness measurements (Revision of ISO 3387:1994, ISO 3387:1994/ Cor 1:2000) 2011-08-29 ISO/DIS 8013 * Rubber, vulcanized Determination of creep in compression or shear (Revision of ISO 8013:2006) 2011-08-19 ISO 1138:2007/DAmd 1 * Rubber compounding ingredients Carbon black Deter- mination of sulfur content Amendment 1: Clarifcation of digestion temperature in Subclause 3.4.5 2011-08-12 ISO 18852:2005/DAmd 1 * Rubber compounding ingredients Determination of mul- tipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA) Amendment 1 2011-08-11 ISO/DIS 21461 Rubber Determination of the aromaticity of oil in vulcani- zed rubber compounds (Revision of ISO 21461:2009) 2011-08-24 TC 61 PLASTICS ISO 15850:2002/DAmd 1 * Plastics Determination of tension-tension fatigue crack propagation Linear elastic fracture mechanics (LEFM) approach Amendment 1 2011-08-09 ISO/DIS 29221 * Plastics Determination of mode I plane-strain crack-arrest toughness 2011-08-15 31 ISO/DIS 14116 * Protective clothing Protection against heat and fame Limited fame spread materials, material assemblies and clothing (Revision of ISO 14116:2008, ISO 14116:2008/Cor 1:2009) 2011-08-25 TC 106 DENTISTRY ISO/DIS 21563 * Dentistry Hydrocolloid impression materials (Revision of ISO 1563:1990, ISO 13716:1999, ISO 1564:1995) 2011-08-18 ISO/DIS 14457 * Dentistry Handpieces and motors 2011-08-25 TC 108 MECHANICAL VIBRATION, SHOCK AND CONDITION MONITORING ISO/DIS 18312-1 Mechanical vibration and shock Measurement of vibration power fow from machines into connected support structu- res Part 1: Direct method 2011-08-18 ISO/DIS 18437-1 Mechanical vibration and shock Characterization of the dy- namic mechanical properties of visco-elastic materials Part 1: Principles and guidelines 2011-08-18 ISO/DIS 20283-4 Mechanical vibration Measurement of vibration on ships Part 4: Measurement and evaluation of vibration of the ship propulsion machinery 2011-09-01 TC 112 VACUUM TECHNOLOGY ISO/DIS 3567 * Vacuum gauges Calibration by direct comparison with a reference gauge (Revision of ISO/TS 3567:2005) 2011-08-15 TC 114 HOROLOGY ISO/DIS 13074 Analogue quartz clocks Fitting dimensions of movements to hands 2011-08-22 TC 118 COMPRESSORS AND PNEUMATIC TOOLS, MACHINES AND EQUIPMENT ISO/DIS 11148-7.2 * Hand-held non-electric power tools Safety requirements Part 7: Grinders 2011-05-04 ISO/DIS 11148-12.2 * Hand-held non-electric power tools Safety requirements Part 12: Circular, oscillating and reciprocating saws 2011-05-04 TC 123 PLAIN BEARINGS ISO/DIS 4383 Plain bearings Multilayer materials for thin-walled plain bearings (Revision of ISO 4383:2000) 2011-08-18 ISO/DIS 4386-1 * Plain bearings Metallic multilayer plain bearings Part 1: Non-destructive ultrasonic testing of bond (Revision of ISO 4386-1:1992) 2011-08-15 ISO/DIS 4386-2 * Plain bearings Metallic multilayer plain bearings Part 2: Destructive testing of bond for bearing metal layer thick- nesses greater than or equal to 2 mm (Revision of ISO 4386- 2:1982) 2011-08-15 ISO/DIS 5659-2 * Plastics Smoke generation Part 2: Determination of op- tical density by a single-chamber test (Revision of ISO 5659- 2:2006) 2011-08-04 ISO/DIS 9773 * Plastics Determination of burning behaviour of thin fexi- ble vertical specimens in contact with a small-fame igni- tion source (Revision of ISO 9773:1998, ISO 9773:1998/Amd 1:2003) 2011-08-25 ISO/DIS 1183-1.2 * Plastics Methods for determining the density of non-cellu- lar plastics Part 1: Immersion method, liquid pyknometer method and titration method(Revision of ISO 1183-1:2004) 2011-05-04 ISO/DIS 11358-3 * Plastics Thermogravimetry (TG) of polymers Part 3: De- termination of the activation energy using the Ozawa-Fried- man plot and analysis of the reaction kinetics 2011-08-17 TC 67 MATERIALS, EQUIPMENT AND OFFSHORE STRUCTURES FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES ISO/DIS 19901-7 * Petroleum and natural gas industries Specifc requirements for offshore structures Part 7: Stationkeeping systems for foating offshore structures and mobile offshore units (Revi- sion of ISO 19901-7:2005) 2011-08-25 TC 69 APPLICATIONS OF STATISTICAL METHODS ISO/DIS 22514-2 * Statistical methods in process management Capability and performance Part 2: Process capability and perfor- mance of time-dependent process models (Revision of ISO 21747:2006) 2011-08-04 TC 71 CONCRETE, REINFORCED CONCRETE AND PRE- STRESSED CONCRETE ISO/DIS 14484 Performance guidelines for design of concrete structures using fbre-reinforced polymer (FRP) materials 2011-08-30 TC 92 FIRE SAFETY ISO/DIS 13784-1 * Reaction to fre test for sandwich panel building systems Part 1: Small room test (Revision of ISO 13784-1:2002) 2011-08-15 TC 94 PERSONAL SAFETY -- PROTECTIVE CLOTHING AND EQUIPMENT ISO/DIS 13287 * Personal protective equipment Footwear Test method for slip resistance (Revision of ISO 13287:2006) 2011-08-25 ISO/DIS 11611 * Protective clothing for use in welding and allied processes (Revision of ISO 11611:2007) 2011-08-25 ISO/DIS 11612 * Protective clothing Clothing to protect against heat and fame Minimum performance requirements (Revision of ISO 11612:2008) 2011-08-25 32 Normas Internacionales TC 126 TOBACCO AND TOBACCO PRODUCTS ISO/DIS 2971 * Cigarettes and flter rods Determination of nominal diame- ter Method using a non-contact optical measuring appara- tus (Revision of ISO 2971:1998) 2011-08-19 TC 131 FLUID POWER SYSTEMS ISO 1179-2:2007/DAmd 1 * Connections for general use and fuid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal- to-metal sealing Part 2: Heavy-duty (S series) and light- duty (L series) stud ends with elastomeric sealing (type E) Amendment 1 2011-09-01 ISO/DIS 6358-1.3 * Pneumatic fuid power - Determination of fow-rate charac- teristics of components Part 1: General rules and test me- thods for steady-state fow (Revision of ISO 6358:1989, ISO/ DIS 6358-2.2) 2011-05-22 ISO/DIS 6358-2.3 * Pneumatic fuid power Determination of fow-rate charac- teristics of components Part 2: Alternative test methods (Re- vision of ISO 6358:1989, ISO/DIS 6358-3.2, ISO/DIS 6358-4.2) 2011-05-22 TC 135 NON-DESTRUCTIVE TESTING ISO/DIS 3059 * Non-destructive testing Penetrant testing and magne- tic particle testing - Viewing conditions (Revision of ISO 3059:2001) 2011-08-18 ISO/DIS 2400 * Non-destructive testing Ultrasonic examination Specifca- tion for calibration block No. 1 (Revision of ISO 2400:1972) 2011-08-18 TC 146 AIR QUALITY ISO/DIS 13271 * Stationary source emissions Determination of PM10/PM2,5 mass concentration in fue gas Measurement at higher concentrations by use of virtual impactors 2011-08-10 ISO/DIS 13833 * Stationary source emissions Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide Radiocarbon sampling and determination 2011-08-25 ISO/DIS 12219-3 * Indoor air of road vehicles Part 3: Screening method for the determination of the emissions of volatile organic com- pounds from vehicle interior parts and materials Micro- chamber method 2011-08-12 TC 150 IMPLANTS FOR SURGERY ISO/DIS 5834-4 * Implants for surgery Ultra-high-molecular-weight polye- thylene Part 4: Oxidation index measurement method (Re- vision of ISO 5834-4:2005) 2011-08-12 ISO/DIS 14708-2 * Implants for surgery Active implantable medical devices Part 2: Cardiac pacemakers (Revision of ISO 14708-2:2005) 2011-09-01 TC 164 MECHANICAL TESTING OF METALS ISO/DIS 9513 * Metallic materials Calibration of extensometer systems used in uniaxial testing (Revision of ISO 9513:1999, ISO 9513:1999/Cor 1:2000) 2011-08-18 ISO/DIS 23788 Metallic materials Verifcation of the alignment of fatigue testing machines 2011-08-23 TC 178 LIFTS, ESCALATORS AND MOVING WALKS ISO/DIS 22201-2 * Lifts (elevators), escalators and moving walks - Programma- ble electronic systems in safety related applications Part 2: Escalators and moving walks (PESSRAE) 2011-09-01 TC 184 AUTOMATION SYSTEMS AND INTEGRATION ISO/DIS 18435-2 Industrial automation systems and integration Diagnostics, capability assessment, and maintenance applications inte- gration Part 2: Descriptions and defnitions of application domain matrix elements 2011-08-30 TC 188 SMALL CRAFT ISO/DIS 9094.2 * Small craft Fire protection (Revision of ISO 9094-2:2002, ISO 9094-1:2003, ISO/WD 9094-1, ISO/WD 9094-2) 2011-05-25 ISO/DIS 21487 * Small craft Permanently installed petrol and diesel fuel tanks (Revision of ISO 21487:2006, ISO 21487:2006/Cor 1:2008) 2011-08-25 TC 190 SOIL QUALITY ISO/DIS 11268-1 * Soil quality Effects of pollutants on earthworms Part 1: Determination of acute toxicity to Eisenia fetida/Eisenia an- drei (Revision of ISO 11268-1:1993) 2011-08-11 ISO/DIS 11268-2 * Soil quality Effects of pollutants on earthworms Part 2: Determination of effects on reproduction to Eisenia fetida/ Eisenia andrei (Revision of ISO 11268-2:1998) 2011-08-11 ISO/DIS 14238 * Soil quality Biological methods Determination of ni- trogen mineralization and nitrifcation in soils and the in- fuence of chemicals on these processes (Revision of ISO 14238:1997) 2011-08-11 ISO/DIS 15685 * Soil quality Determination of potential nitrifcation and in- hibition of nitrifcation Rapid test by ammonium oxidation (Revision of ISO 15685:2004) 2011-08-11 ISO/DIS 17155 * Soil quality Determination of abundance and activity of soil microfora using respiration curves (Revision of ISO 17155:2002) 2011-08-11 ISO/DIS 23611-6 * Soil quality Sampling of soil invertebrates Part 6: Gui- dance for the design of sampling programmes with soil in- vertebrates 2011-08-11 33 TC 197 HYDROGEN TECHNOLOGIES ISO/DIS 20100 * Gaseous hydrogen Fuelling stations (Revision of ISO/TS 20100:2008) 2011-08-22 TC 204 INTELLIGENT TRANSPORT SYSTEMS ISO/DIS 17261 * Intelligent transport systems Automatic vehicle and equi- pment identifcation Intermodal goods transport architec- ture and terminology (Revision of ISO/TS 17261:2005, ISO/TS 17261:2005/Cor 1:2005) 2011-08-25 ISO/DIS 17262 * Intelligent transport systems Automatic vehicle and equi- pment identifcation Numbering and data structure (Revi- sion of ISO/TS 17262:2003) 2011-08-25 ISO/DIS 17263 * Intelligent transport systems Automatic vehicle and equip- ment identifcation Intermodal goods transport --- System parameters (Revision of ISO/TS 17263:2003) 2011-08-25 ISO/DIS 21214 * Intelligent transport systems Communications access for land mobiles (CALM) Infra-red systems (Revision of ISO 21214:2006) 2011-08-22 TC 205 BUILDING ENVIRONMENT DESIGN ISO/DIS 11855-6 Building environment design Design, construction and operation of radiant heating and cooling systems Part 6: Control 2011-08-30 ISO/DIS 13153 Framework of the design process for energy-saving single- family residential and small commercial buildings with the energy consumption ratio as a criterion 2011-08-30 TC 206 FINE CERAMICS ISO/DIS 23145-2 * Fine ceramics (advanced ceramics, advanced technical cera- mics) Determination of bulk density of ceramic powders Part 2: Untapped density 2011-08-17 TC 216 FOOTWEAR ISO/DIS 16177 * Footwear Resistance to crack initiation and growth Belt fex method 2011-08-18 TC 234 FISHERIES AND AQUACULTURE ISO/DIS 12878 * Environmental monitoring of the seabed impacts from mari- ne fnfsh farms 2011-08-30 TC 244 INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT ISO/DIS 13577-1 Industrial furnaces and associated processing equipment Safety Part 1: General requirements 2011-08-15 JTC 1 INFORMATION TECHNOLOGY ISO/IEC 13818-2:2000/DAmd 4 * Information technology Generic coding of moving pictures and associated audio information: Video Part 2: Amend- ment 4: Frame packing arrangement signalling for 3D content 2011-08-25 ISO/IEC 14496-10:2010/DAmd 1 Information technology Coding of audio-visual objects Part 10: Advanced Video Coding Amendment 1: Level 5.2 and progressive high profle 2011-08-26 ISO/IEC 15938-9:2005/DAmd 1 * Information technology Multimedia content description interface Part 9: Profles and levels Amendment 1: Ex- tensions to profles and levels 2011-08-25 Normas publicadas Periodo comprendido entre el 1 y el 31 de marzo de 2011. (*) Actualmente disponible slo en ingls (**) Versin francesa de la norma publicada anteriormente slo en ingls
Grupo de Precio TC 2 FASTENERS ISO 4014:2011 Hexagon head bolts Product grades A and B G ISO 4016:2011 Hexagon head bolts Product grade C E ISO 8765:2011 Hexagon head bolts with metric fne pitch thread Product grades A and B F ISO 14579:2011 Hexalobular socket head cap screws D ISO 14580:2011 Hexalobular socket cheese head screws C ISO 14583:2011 Hexalobular socket pan head screws C ISO 14584:2011 Hexalobular socket raised countersunk head screws C ISO 10510:2011 Tapping screw and washer assemblies with plain washers B TC 4 ROLLING BEARINGS ISO 15:2011 Rolling bearings Radial bearings Boundary dimensions, general plan K TC 17 STEEL ISO 10893-1:2011 Non-destructive testing of steel tubes Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verifcation of hydraulic leaktightness G 34 Normas Internacionales ISO 10893-2:2011 Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except sub- merged arc-welded) steel tubes for the detection of imper- fections F ISO 10893-3:2011 Non-destructive testing of steel tubes Part 3: Automated full peripheral fux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfec- tions E ISO 10893-4:2011 Non-destructive testing of steel tubes Part 4: Liquid pene- trant inspection of seamless and welded steel tubes for the detection of surface imperfections D ISO 10893-5:2011 Non-destructive testing of steel tubes Part 5: Magnetic par- ticle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections D ISO 10893-6:2011 Non-destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detec- tion of imperfections G ISO 10893-7:2011 Non-destructive testing of steel tubes Part 7: Digital radio- graphic testing of the weld seam of welded steel tubes for the detection of imperfections J ISO 10893-8:2011 Non-destructive testing of steel tubes Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections E ISO 10893-9:2011 Non-destructive testing of steel tubes Part 9: Automated ultrasonic testing for the detection of laminar imperfec- tions in strip/plate used for the manufacture of welded steel tubes E ISO 10893-10:2011 Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (ex- cept submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections F ISO 10893-11:2011 Non-destructive testing of steel tubes Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfec- tions E ISO 10893-12:2011 Non-destructive testing of steel tubes Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes C TC 22 ROAD VEHICLES ISO 7637-2:2011 * Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along su- pply lines only S ISO 16844-2:2011 * Road vehicles Tachograph systems Part 2: Electrical in- terface with recording unit C ISO 3888-2:2011 * Passenger cars Test track for a severe lane-change ma- noeuvre Part 2: Obstacle avoidance C ISO 10392:2011 * Road vehicles Determination of centre of gravity G ISO 14792:2011 * Road vehicles Heavy commercial vehicles and buses Steady-state circular tests G ISO 20176:2011 * Road vehicles H-point machine (HPM-II) Specifcations and procedure for H-point determination V TC 23 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY ISO 11783-5:2011 * Tractors and machinery for agriculture and forestry Serial control and communications data network Part 5: Network management N ISO 14223-1:2011 Radiofrequency identifcation of animals Advanced trans- ponders Part 1: Air interface M TC 25 CAST IRONS AND PIG IRONS ISO/TR 10809-2:2011 * Cast irons Part 2: Welding U TC 28 PETROLEUM PRODUCTS AND LUBRICANTS ISO 26422:2011 * Petroleum and related products Determination of shear stability of lubricating oils containing polymers Method using a tapered roller bearing E ISO 8217:2010/Cor 1:2011 Petroleum products Fuels (class F) Specifcations of ma- rine fuels Technical Corrigendum 1 free ISO/TS 11365:2011 Petroleum and related products Guidance for the maintenan- ce and use of triaryl phosphate ester turbine-control fuids K ISO/TS 11366:2011 Petroleum and related products Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines L ISO 15380:2011 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifcations for categories HETG, HEPG, HEES and HEPR J TC 29 SMALL TOOLS ISO 13399-1:2006/Cor 2:2011 * Cutting tool data representation and exchange Part 1: Overview, fundamental principles and general information model Technical Corrigendum 2 free ISO/TS 13399-2:2005/Cor 1:2011 * Cutting tool data representation and exchange Part 2: Re- ference dictionary for the cutting items Technical Corrigen- dum 1 free 35 ISO/TS 13399-3:2007/Cor 1:2011 * Cutting tool data representation and exchange Part 3: Re- ference dictionary for tool items Technical Corrigendum 1 free ISO/TS 13399-4:2007/Cor 1:2011 * Cutting tool data representation and exchange Part 4: Re- ference dictionary for adaptive items Technical Corrigen- dum 1 free ISO/TS 13399-5:2007/Cor 1:2011 * Cutting tool data representation and exchange Part 5: Re- ference dictionary for assembly items Technical Corrigen- dum 1 free ISO/TS 13399-50:2007/Cor 1:2011 * Cutting tool data representation and exchange Part 50: Re- ference dictionary for reference systems and common con- cepts Technical Corrigendum 1 free ISO/TS 13399-60:2007/Cor 1:2011 * Cutting tool data representation and exchange Part 60: Reference dictionary for connection systems Technical Co- rrigendum 1 free ISO/TS 13399-100:2008/Cor 1:2011 Cutting tool data representation and exchange Part 100: Defnitions, principles and methods for reference dictiona- ries Technical Corrigendum 1 free TC 31 TYRES, RIMS AND VALVES ISO 4223-1:2002 Defnitions of some terms used in the tyre industry Part 1: Pneumatic tyres F TC 34 FOOD PRODUCTS ISO 8607:2003/Amd 1:2011 * Artifcial insemination of animals Frozen semen of bree- ding bulls Enumeration of living aerobic microorganisms Amendment 1 XZ ISO/TS 21033:2011 Animal and vegetable fats and oils Determination of tra- ce elements by inductively coupled plasma optical emission spectroscopy (ICP-OES) D ISO 24114:2011 * Instant coffee Criteria for authenticity B TC 44 WELDING AND ALLIED PROCESSES ISO 544:2011 Welding consumables Technical delivery conditions for fller materials and fuxes Type of product, dimensions, to- lerances and markings E TC 45 RUBBER AND RUBBER PRODUCTS ISO 1652:2011 Rubber latex Determination of apparent viscosity by the Brookfeld test method E TC 46 INFORMATION AND DOCUMENTATION ISO 16245:2009 Information and documentation Boxes, fle covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents D ISO 28560-1:2011 * Information and documentation RFID in libraries Part 1: Data elements and general guidelines for imple- mentation N ISO 28560-2:2011 * Information and documentation RFID in libraries Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962 S ISO 28560-3:2011 * Information and documentation RFID in libraries Part 3: Fixed length encoding M TC 61 PLASTICS ISO/TR 22007-5:2011 * Plastics Determination of thermal conductivity and ther- mal diffusivity Part 5: Results of interlaboratory testing of poly (methyl methacrylate) samples Q ISO 15015:2011 Plastics Extruded sheets of impact-modifed acrylonitrile- styrene copolymers (ABS, AEPDS and ASA) Requirements and test methods F ISO 9001 para la pequea empresa. Recomendaciones del Comit ISO/TC 176 3. edicin Esta gua ha sido elaborada por los expertos de calidad responsables del desarrollo de las normas ISO 9000 y participantes en el comit ISO/TC 176 Gestin y aseguramiento de la calidad. Proporciona: Respuesta a preguntas clave como: Qu es un sistema de gestin de la calidad? Por qu hay que tener un sistema de gestin de la calidad? Cmo hay que hacerlo? Las mejores orientaciones para disear, implantar y mantener un sistema de gestin de calidad ISO 9001 en la pequea empresa. Una explicacin detallada de cada uno de sus requisitos de la norma UNE-EN ISO 9001, adecuando su contenido a las particularidades de estas organizaciones. Numerosos ejemplos de cmo pymes de diferentes sectores han aplicado un sistema de gestin de la calidad. 2010 166 pg. 30 Wire-o+Rstica 17x24 cm Ms informacin: 902 102 201 - aenor.publicaciones@aenor.es - www.aenor.es ediciones 36 Normas Internacionales TC 69 APPLICATIONS OF STATISTICAL METHODS ISO 28801:2011 * Double sampling plans by attributes with minimal sample si- zes, indexed by producers risk quality (PRQ) and consumers risk quality (CRQ) V TC 76 TRANSFUSION, INFUSION AND INJECTION, AND BLOOD PROCESSING EQUIPMENT FOR MEDICAL AND PHARMACEUTICAL USE ISO 11040-2:2011 * Preflled syringes Part 2: Plunger stoppers for dental local anaesthetic cartridges C ISO 13926-2:2011 * Pen systems Part 2: Plunger stoppers for pen-injectors for medical use D TC 79 LIGHT METALS AND THEIR ALLOYS ISO 10216:2010/Cor 1:2011 * Anodizing of aluminium and its alloys Instrumental deter- mination of image clarity of anodic oxidation coatings Ins- trumental method Technical Corrigendum 1 free TC 92 FIRE SAFETY ISO/TS 24679:2011 Fire safety engineering Performance of structures in fre M TC 121 ANAESTHETIC AND RESPIRATORY EQUIPMENT ISO 80601-2-61:2011 * Medical electrical equipment Part 2-61: Particular requi- rements for basic safety and essential performance of pulse oximeter equipment X TC 138 PLASTICS PIPES, FITTINGS AND VALVES FOR THE TRANSPORT OF FLUIDS ISO 11296-1:2009 Plastics piping systems for renovation of underground non-pres- sure drainage and sewerage networks Part 1: General G ISO 11296-4:2009 Plastics piping systems for renovation of underground non- pressure drainage and sewerage networks Part 4: Lining with cured-in-place pipes P ISO 11298-1:2010 Plastics piping systems for renovation of underground water supply networks Part 1: General G ISO 11298-3:2010 Plastics piping systems for renovation of underground water supply networks Part 3: Lining with close-ft pipes G ISO 21751:2011 * Plastics pipes and fttings Decohesion test of electrofusion assemblies Strip-bend test D TC 145 GRAPHICAL SYMBOLS ISO 3864-4:2011 * Graphical symbols Safety colours and safety signs Part 4: Co- lorimetric and photometric properties of safety sign materials L ISO 7010:2003/Amd 8:2011 Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas Amendment 8 XZ TC 146 AIR QUALITY ISO 28439:2011 Workplace atmospheres Characterization of ultrafne aero- sols/nanoaerosols Determination of the size distribution and number concentration using differential electrical mobi- lity analysing systems H TC 150 IMPLANTS FOR SURGERY ISO 7206-2:2011 Implants for surgery Partial and total hip joint prostheses Part 2: Articulating surfaces made of metallic, ceramic and plastics materials C TC 161 CONTROL AND PROTECTIVE DEVICES FOR GAS AND/OR OIL BURNERS AND APPLIANCES ISO 23550:2011 Safety and control devices for gas burners and gas-burning appliances General requirements S TC 163 THERMAL PERFORMANCE AND ENERGY USE IN THE BUILT ENVIRONMENT ISO 18292:2011 * Energy performance of fenestration systems for residential buildings Calculation procedure Q TC 172 OPTICS AND PHOTONICS ISO 14534:2011 Ophthalmic optics Contact lenses and contact lens care products Fundamental requirements E TC 178 LIFTS, ESCALATORS AND MOVING WALKS ISO 22201:2009/Cor 1:2011 * Lifts (elevators) Design and development of programma- ble electronic systems in safety-related applications for lifts (PESSRAL) Technical Corrigendum 1 free TC 188 SMALL CRAFT ISO 12402-7:2006/Amd 1:2011 Personal fotation devices Part 7: Materials and compo- nents Safety requirements and test methods Amend- ment 1 L ISO 12402-8:2006/Amd 1:2011 Personal fotation devices Part 8: Accessories Safety re- quirements and test methods Amendment 1 XZ ISO 12402-9:2006/Amd 1:2011 Personal fotation devices Part 9: Test methods Amend- ment 1 XZ TC 190 SOIL QUALITY ISO 16703:2004 Soil quality Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography J ISO 22155:2011 Soil quality Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers Static headspace method L ISO 16072:2002 Soil quality Laboratory methods for determination of mi- crobial soil respiration K 37 TC 195 BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT ISO 18651-1:2011 Building construction machinery and equipment Internal vibrators for concrete Part 1: Terminology and commercial specifcations H TC 204 INTELLIGENT TRANSPORT SYSTEMS ISO 29281:2011 * Intelligent transport systems Communications access for land mobiles (CALM) Non-IP networking W TC 206 FINE CERAMICS ISO 22197-2:2011 Fine ceramics (advanced ceramics, advanced technical cera- mics) Test method for air-purifcation performance of se- miconducting photocatalytic materials Part 2: Removal of acetaldehyde G ISO 22197-3:2011 Fine ceramics (advanced ceramics, advanced technical cera- mics) Test method for air-purifcation performance of se- miconducting photocatalytic materials Part 3: Removal of toluene F TC 213 DIMENSIONAL AND GEOMETRICAL PRODUCT SPECIFICATIONS AND VERIFICATION ISO 12180-1:2011 Geometrical product specifcations (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form H ISO 12180-2:2011 Geometrical product specifcations (GPS) Cylindricity Part 2: Specifcation operators F ISO 12181-1:2011 Geometrical product specifcations (GPS) Roundness Part 1: Vocabulary and parameters of roundness G ISO 12181-2:2011 Geometrical product specifcations (GPS) Roundness Part 2: Specifcation operators E ISO 12780-1:2011 Geometrical product specifcations (GPS) Straightness Part 1: Vocabulary and parameters of straightness F ISO 12780-2:2011 Geometrical product specifcations (GPS) Straightness Part 2: Specifcation operators D ISO 12781-1:2011 Geometrical product specifcations (GPS) Flatness Part 1: Vocabulary and parameters of fatness F ISO 12781-2:2011 Geometrical product specifcations (GPS) Flatness Part 2: Specifcation operators G ISO 25378:2011 Geometrical product specifcations (GPS) Characteristics and conditions Defnitions U IULTCS INTERNATIONAL UNION OF LEATHER TECHNOLOGISTS AND CHEMISTS SOCIETIES ISO 17234-2:2011 Leather Chemical tests for the determination of certain azo colorants in dyed leathers Part 2: Determination of 4-ami- noazobenzene H JTC 1 INFORMATION TECHNOLOGY ISO/IEC 10646:2011 * Information technology Universal Coded Character Set (UCS) U ISO/IEC 19761:2011 * Software engineering COSMIC: a functional size measure- ment method G ISO/IEC/IEEE 24765:2011 * Systems and software engineering Vocabulary XK ISO/IEC 25010:2011 * Systems and software engineering Systems and software Quality Requirements and Evaluation (SQuaRE) System and software quality models Q ISO/IEC 10373-8:2011 * Identifcation cards Test methods Part 8: USB-ICC Q ISO/IEC 24727-5:2011 * Identifcation cards Integrated circuit card programming interfaces Part 5: Testing procedures XH ISO/IEC 24775:2011 * Information technology Storage management XU ISO/IEC 9797-1:2011 * Information technology Security techniques Message Authentication Codes (MACs) Part 1: Mechanisms using a block cipher R ISO/IEC 27031:2011 * Information technology Security techniques Guidelines for information and communication technology readiness for business continuity R ISO/IEC 23005-1:2011 * Information technology Media context and control Part 1: Architecture L ISO/IEC 18046-2:2011 * Information technology Radio frequency identifcation de- vice performance test methods Part 2: Test methods for interrogator performance L ISO/IEC 24724:2011 * Information technology Automatic identifcation and data capture techniques GS1 DataBar bar code symbology spe- cifcation W ISO/IEC 29109-5:2011 * Information technology Conformance testing methodolo- gy for biometric data interchange formats defned in ISO/IEC 19794 Part 5: Face image data M 38 Normas Internacionales Informacin Pblica (DIS) IEC MARZO 17A/962/FDIS IEC 62271-1 Amend 1 Ed.1: High-voltage switchgear and controlgear - Part 1: Common specifcations 22E/129/FDIS IEC 61204-3 Ed.2: Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) 23H/254/FDIS IEC 62613-1 Ed.1: Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 1: General requirements 31/921/FDIS IEC 60079-35-1 Ed. 1.0: Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to fredamp - General requirements - Construction and testing in relation to the risk of explosion 31/922/FDIS IEC 60079-0 Ed. 6.0: Explosive atmospheres - Part 0: Equip- ment - General requirements 31G/207/FDIS IEC 60079-11 Ed. 6.0: Explosive atmospheres Part 11: Equip- ment protection by intrinsic safety "i" 34B/1595/FDIS IEC 60061-1: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps - Amendment 46 34B/1596/FDIS IEC 60061-2: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lam- pholders - Amendment 43 34C/964/FDIS IEC 62386-209 Ed.1: Digital addressable lighting interface - Part 209: Particular requirements for control gear - Colour control (device type 8) 38/410/FDIS IEC 61869-3 Ed. 1: Instrument transformers - Part 3: Additio- nal requirements for inductive voltage transformers 38/411/FDIS IEC 61869-5 Ed. 1: Instrument transformers - Part 5: Additio- nal requirements for capacitor voltage transformers 46F/191/FDIS IEC 61169-35 Ed 1.0: Radio-Frequency Connectors - Part 35: Sectional specifcation for 2,92 series RF connectors 47F/80/FDIS IEC 62047-12 Ed.1: Semiconductor devices - Micro-electro- mechanical devices - Part 12: Bending fatigue testing me- thod of thin flm materials using resonant vibration of MEMS structures 47F/79/FDIS IEC 62047-7 Ed.1: Semiconductor devices - Micro-electrome- chanical devices - Part 7: MEMS BAW flter and duplexer for radio frequency control and selection 47/2087/FDIS IEC 60749-7 Ed.2: Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases Sistemas de gestin Manual de normas UNE Este manual recopila los 15 documentos relativos a los sistemas de gestin ms demandados por las organizaciones comprometidas con la calidad, el medio ambiente, la innovacin, la seguridad o la responsabilidad social. Ventajas que obtendr al integrar los sistemas de gestin: Reduccin de costes Mejora de la gestin Aumento de la efcacia en la gestin y efciencia en la consecucin de objetivos y metas Minimizacin de la documentacin y registros Optimizacin de los procesos, tiempo y recursos Mayor participacin y confanza del personal Minimizacin de riesgos y aumento de la seguridad Mejora de la competitividad Simplifcacin del proceso de certifcacin 2010 Rstica 17 x 24 cm 552 pginas - 65 ISBN: 978-84-8143-713-3 Ms informacin: 902 102 201 - aenor.publicaciones@aenor.es - www.aenor.es ediciones 39 55/1223/FDIS IEC 60851-5 A1 Ed. 4.0: Winding wires - Test methods - Part 5: Electrical properties 57/1121/FDIS IEC 61850-7-1 Ed.2: Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models 61E/680/FDIS IEC 60335-2-37-A2 Ed 5.0: Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers 62D/918/FDIS IEC 60601-2-31 Amd.1 Ed. 2: Medical electrical equipment - Part 2-31: Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source 81/391/FDIS IEC 62561-5: Lightning Protection System Components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals 81/392/FDIS IEC 62561-6: Lightning Protection System Components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) 86/395/FDIS IEC 62129-2 Ed. 1.0: Calibration of wavelength/optical fre- quency measurement instruments - Part 2: Michelson inter- ferometer single wavelength meters 100/1829/FDIS IEC 62605: Multimedia systems and equipment - Multimedia e- publishing and e-books - Interchange format for e-dictionaries 110/287/FDIS IEC 61747-5-2 Ed.1: Liquid crystal display devices - Part 5-2: En- vironmental, endurance and mechanical test methods - Visual inspection of active matrix colour liquid crystal display modules 112/174/FDIS IEC 60505 Ed.4: Evaluation and qualifcation of electrical in- sulation systems CIS/A/941/FDIS CISPR 17 Ed.2: Methods of measurement of the suppression characteristics of passive EMC fltering devices CIS/A/942/FDIS CISPR 16-4-2 Ed.2: Specifcation for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty Normas Publicadas Normas publicadas entre el 1 y el 31 de marzo de 2011 IEC 60086-5 (2011-03-08) Ed. 3.0 Primary batteries - Part 5: Safety of batteries with aqueous electrolyte IEC 60670-1-am1 (2011-03-08) Ed. 1.0 Amendment 1 - Boxes and enclosures for electrical acces- sories for household and similar fxed electrical installa- tions - Part 1: General requirements IEC 60670-24 (2011-03-08) Ed. 2.0 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment IEC 61803 (2011-03-08) Ed. 1.1 Determination of power losses in high-voltage direct cu- rrent (HVDC) converter stations with line-commutated con- verters IEC/TS 61994-4-2 (2011-03-08) Ed. 2.0 Piezoelectric, dielectric and electrostatic devices and asso- ciated materials for frequency control, selection and detec- tion - Glossary - Part 4-2: Piezoelectric and dielectric mate- rials - Piezoelectric ceramics IEC/PAS 62707-1 (2011-03-08) Ed. 1.0 LED - Binning - Part 1: General requirements and white grid IEC 61643-11 (2011-03-09) Ed. 1.0 Low-voltage surge protective devices - Part 11: Surge pro- tective devices connected to low-voltage power systems - Requirements and test methods IEC 61936-1 (2011-03-09) Ed.2.0 Corrigendum 1 - Power installations exceeding 1 kV a.c. - Part 1: Common rules IEC 60512-26-100-am1 (2011-03-14) Ed. 1.0 Amendment 1 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for con- nectors according to IEC 60603-7 - Tests 26a to 26g IEC 60679-6 (2011-03-14) Ed. 1.0 Quartz crystal controlled oscillators of assessed quality - Part 6: Phase jitter measurement method for quartz crystal oscillators and SAW oscillators - Application guidelines Documentos de Orientacin Tcnica, con actualizacin y recopilacin de los textos reglamentarios nacionales y comunitarios sobre las Directivas de Nuevo Enfoque. Referencia de normas armonizadas y organismos notifcados. Documentos de Orientacin Tcnica Tel. 914 32 69 34 informacin 40 Normas Internacionales IEC 60745-2-22 (2011-03-14) Ed. 1.0 Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines IEC 60793-2-10 (2011-03-14) Ed. 4.0 Optical fbres - Part 2-10: Product specifcations - Sectional specifcation for category A1 multimode fbres IEC 60838-1-am2 (2011-03-14) Ed. 4.0 Amendment 2 - Miscellaneous lampholders - Part 1: General requirements and tests IEC 60947-4-3-am2 (2011-03-14) Ed. 1.0 Amendment 2 - Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads IEC 62040-3 (2011-03-14) Ed. 2.0 Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements IEC 62047-8 (2011-03-14) Ed. 1.0 Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile property mea- surement of thin flms IEC/TR 62267-2 (2011-03-14) Ed. 1.0 Railway applications - Automated urban guided transport (AUGT) - Safety requirements - Part 2: Hazard analysis at top system level IEC/TS 62332-1 (2011-03-14) Ed. 2.0 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General re- quirements IEC 62343-2 (2011-03-14) Ed. 1.0 Dynamic modules - Part 2: Reliability qualifcation IEC 62359 (2011-03-15) Ed. 2.0 Corrigendum 1 - Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic felds IEC 60364-5-54 (2011-03-23) Ed. 3.0 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors IEC 60364-7-718 (2011-03-23) Ed. 1.0 Low-voltage electrical installations - Part 7-718: Require- ments for special installations or locations - Communal fa- cilities and workplaces IEC 61300-1 (2011-03-23) Ed. 3.0 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance IEC/TS 62558 (2011-03-23) Ed. 1.0 Ultrasonics - Real-time pulse-echo scanners - Phantom with cylindrical, artifcial cysts in tissue-mimicking material and method for evaluation and periodic testing of 3D-distribu- tions of void-detectability ratio (VDR) IEC/PAS 62565-2-1 (2011-03-25) Ed. 1.0 Nanomanufacturing - Material specifcations - Part 2-1: Sin- gle-wall carbon nanotubes - Blank detail specifcation IEC 60825-4-am2 (2011-03-29) Ed. 2.0 Amendment 2 - Safety of laser products - Part 4: Laser guards IEC/TS 62504 (2011-03-29) Ed. 1.0 General lighting - LEDs and LED modules - Terms and de- fnitions IEC 62571 (2011-03-29) Ed. 1.0 Digital audiobook fle format and player requirements IEC 60071-1 (2011-03-30) Ed. 8.1 Insulation co-ordination - Part 1: Defnitions, principles and rules IEC 60534-2-1 (2011-03-30) Ed. 2.0 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fuid fow under installed conditions IEC 60601-2-27 (2011-03-30) Ed. 3.0 Medical electrical equipment - Part 2-27: Particular requi- rements for the basic safety and essential performance of electrocardiographic monitoring equipment IEC 60749-23 (2011-03-30) Ed. 1.1 Semiconductor devices - Mechanical and climatic test me- thods - Part 23: High temperature operating life IEC 60947-1 (2011-03-30) Ed. 5.1 Low-voltage switchgear and controlgear - Part 1: General rules IEC 61000-4-4 (2011-03-30) Ed. 2.1 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst im- munity test IEC 61000-4-18 (2011-03-30) Ed. 1.1 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immu- nity test IEC 61167 (2011-03-30) Ed. 2.0 Metal halide lamps - Performance specifcation IEC/TS 61968-2 (2011-03-30) Ed. 2.0 Application integration at electric utilities - System interfaces for distribution management - Part 2: Glossary IEC 62384 (2011-03-30) Ed. 1.1 DC or AC supplied electronic control gear for LED modules - Performance requirements IEC/TR 62543 (2011-03-30) Ed. 1.0 High-voltage direct current (HVDC) power transmission using voltage sourced converters (VSC) IEC 62598 (2011-03-30) Ed. 1.0 Nuclear instrumentation - Constructional requirements and classifcation of radiometric gauges IEC 62637-1 (2011-03-30) Ed. 1.0 Battery charging interface for smallhand held multimedia devices - Part 1: 2mm barrel interface IEC 62637-2 (2011-03-30) Ed. 1.0 Battery charging interface for small handheld multimedia devices - Part 2: 2 mm barrel type interface conformance testing SEDE SOCIAL: Gnova, 6. 28004 MADRID. Tel. 902 102 201. Fax 913 104 032. info@aenor.es. www.aenor.es ANDALUCA: Leonardo da Vinci, 2 Isla de la Cartuja 41092 SEVILLA Tel.: 954 468 010 Fax: 954 460 407 aenorandalucia@iat.es Marie Curie, 4, local D2 Parque Tecnolgico de Andaluca 29590 Campanillas (MLAGA) Tel.: 952 028 710 Fax: 952 020 480 aenorandalucia@iat.es ARAGN: P. Sagasta, 72, entlo. dcha. 50006 ZARAGOZA Tel.: 976 259 680 Fax: 976 251 748 dar@aenor.es CANARIAS: General Vives, 56, 2 E. Of. 202 Edifcio Primo de Rivera 35007 LAS PALMAS DE G.C. Tel.: 928 263 327 Fax: 928 472 106 canarias@aenor.es La Marina, 26 Torre A. Of. 301-A 38001 SANTA CRUZ DE TENERIFE Tel.: 922 531 332 Fax: 922 284 631 canarias@aenor.es CANTABRIA: Eduardo Benot, 5, 1 B y C 39003 SANTANDER Tel. 942 318 844 Fax 942 364 789 cantabria@aenor.es CASTILLA Y LEN: Marina Escobar, 2, entreplanta 47001 VALLADOLID Tel.: 983 549 740 Fax: 983 548 743 dcyl@aenor.es CASTILLA-LA MANCHA: Reino Unido, 3, 2 planta, of. 2 45005 TOLEDO Tel.: 925 258 750 Fax: 925 258 752 castillalamancha@aenor.es CATALUA: Tnger, 98, 8 planta. Edifcio Interface 08018 BARCELONA Tel.: 932 292 929 Fax: 932 261 559 dct@aenor.es COMUNIDAD VALENCIANA: Pl. del Ayuntamiento, 26, 4 46002 VALENCIA Tel.: 963 535 373 Fax: 963 522 147 dcv@aenor.es Av. Maisonnave, 19, 7 izda. 03003 ALICANTE Tel.: 965 984 954 Fax: 965 926 847 dcv@aenor.es EXTREMADURA: Centro de Negocios Mrida Av. Reina Sofa esquina Benito Arias Montano, ofcina n 6 2 planta 06800 MRIDA Tel.: 924 387 754 Fax: 924 303 029 extremadura@aenor.es GALICIA: Enrique Marias, 36, 7 Edifcio Torre Cristal 15009 A CORUA Tel.: 981 175 080 Fax: 981 290 705 galicia@aenor.es Av. Garca Barbn, 29, 1D 36201 VIGO Tel.: 986 443 554 Fax: 986 227 059 galicia@aenor.es ISLAS BALEARES: Porto Pi, 8, 6 A 07015 PALMA DE MALLORCA Tel.: 971 707 068 Fax: 971 404 736 baleares@aenor.es LA RIOJA: Av. Gran Va, 59, 1 planta 26005 LOGROO Tel.: 941 202 950 Fax: 941 228 478 larioja@aenor.es MADRID: Gnova, 6 28004 MADRID Tel.: 915 294 900 Fax: 915 294 949 Madrid@aenor.es NAVARRA: Av. Carlos III, 1, 1 planta 31002 PAMPLONA Tel.: 948 206 330 Fax: 948 229 803 navarra@aenor.es PAS VASCO: Ibez de Bilbao, 28, 3 D 48009 BILBAO Tel.: 944 355 200 Fax: 944 247 370 dpv@aenor.es PRINCIPADO DE ASTURIAS: Parque Cientfco Tecnolgico de Gijn. Edifcio FADE Profesor Potter, 51. 33203 GIJN Tel.: 985 196 011 Fax: 985 373 722 dpa@aenor.es REGIN DE MURCIA: rea de Negocios Plazarte Jos Manuel Snchez-Pedreo, 1 of. 5B El Ranero 30009 MURCIA Tel.: 968 272 770 Fax: 968 243 635 drm@aenor.es * Los precios no incluyen el IVA. Gastos de envo aparte, segn las tarifas vigentes, a cargo del destinatario Rogamos nos enven las siguientes normas o publicaciones: Cantidad Cdigo norma o ttulo publicacin Precio* TOTAL Normas Europeas 41 Proyectos sometidos a Informacin pblica CEN/CENELEC MARZO AECMA/TC ASOCIACIN EUROPEA DE INDUSTRIAS AEROESPACIALES FprEN 2240-61 Aerospace series - Lamps, incandescent - Part 061: Lamp, code 1683 - Product standard Fecha Lmite: 2011-03-16 FprEN 2240-62 Aerospace series - Lamps, incandescent - Part 062: Lamp, code 1810 - Product standard Fecha Lmite: 2011-03-16 FprEN 2240-63 Aerospace series - Lamps, incandescent - Part 063: Lamp, code 1815 - Product standard Fecha Lmite: 2011-03-16 FprEN 2240-64 Aerospace series - Lamps, incandescent - Part 064: Lamp, code 1819 - Product standard Fecha Lmite: 2011-03-16 FprEN 2240-65 Aerospace series - Lamps, incandescent - Part 065: Lamp, code 1820 - Product standard Fecha Lmite: 2011-03-16 FprEN 2240-66 Aerospace series - Lamps, incandescent - Part 066: Lamp, code 1829 - Product standard Fecha Lmite: 2011-03-16 FprEN 2240-67 Aerospace series - Lamps, incandescent - Part 067: Lamp, code 1843 - Product standard Fecha Lmite: 2011-03-16 FprEN 2240-68 Aerospace series - Lamps, incandescent - Part 068: Lamp, code 1864 - Product standard Fecha Lmite: 2011-03-16 FprEN 2240-69 Aerospace series - Lamps, incandescent - Part 069: Lamp, code 1978 - Product standard Fecha Lmite: 2011-03-16 FprEN 2240-70 Aerospace series - Lamps, incandescent - Part 070: Lamp, code 2232 - Product standard Fecha Lmite: 2011-03-16 FprEN 9115 Quality Management Systems - Requirements for Aviation, Space and Defence Organizations - Deliverable Software (Supplement to EN 9100) Fecha Lmite: 2011-05-17 FprEN 9137 Quality management systems - Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System Fecha Lmite: 2011-05-24 CEN/TC SECRETARA CENTRAL prEN ISO 6433 Technical product documentation - Part references (ISO/DIS 6433:2010) Fecha Lmite: 2011-03-17 CEN/TC ASCENSORES, ESCALERAS MECNICAS Y ACERAS MVILES FprEN 12159 Builders hoists for persons and materials with vertically gui- ded cages Fecha Lmite: 2011-08-17 CEN/TC MATERIALES, EQUIPOS Y ESTRUCTURAS MARINAS PARA LA INDUSTRIA DEL PETRLEO Y DEL GAS NATURAL FprCEN ISO/TS 27469 Petroleum, petrochemical and natural gas industries - Me- thod of test for fre dampers (ISO/DTS 27469:2010) Fecha Lmite: 2011-06-17 prEN ISO 10439-1 Petroleum, petrochemical and natural gas industries . Axial and centrifugal compressors and expander-compressors . Part 1: General requirements (ISO/DIS 10439-1:2010) Fecha Lmite: 2011-03-15 prEN ISO 10439-2 Petroleum, petrochemical and natural gas industries . Axial and centrifugal compressors and expander-compressors . Part 2: Non-integrally geared centrifugal and axial compres- sors (ISO/DIS 10439-2:2010) Fecha Lmite: 2011-03-15 prEN ISO 10439-3 Petroleum, petrochemical and natural gas industries . Axial and centrifugal compressors and expander-compressors . Part 3: In- tegrally geared centrifugal compressors (ISO/DIS 10439-3:2010) Fecha Lmite: 2011-03-15 prEN ISO 10439-4 Petroleum, petrochemical and natural gas industries . Axial and centrifugal compressors and expander-compressors . Part 4: Expander-compressors (ISO/DIS 10439-4:2010) Fecha Lmite: 2011-03-15 prEN ISO 19901-7 Petroleum and natural gas industries - Specifc requirements for offshore structures - Part 7: Stationkeeping systems for foating offshore structures and mobile offshore units (ISO/ DIS 19901-7:2011) Fecha Lmite: 2011-08-24 42 Normas Europeas CEN/TC PUERTAS, VENTANAS, PERSIANAS, HERRAJES PARA LA EDIFICACIN Y FACHADAS LIGERAS FprEN 13126-2 Building hardware - Requirements and test methods for windows and doors height windows - Part 2: Window fas- tener handles Fecha Lmite: 2011-07-25 CEN/TC SISTEMAS DE DETECCIN AUTOMTICA DE INCENDIOS prEN 54-5 Fire detection and fre alarm systems - Part 5: Heat detectors - Point detectors Fecha Lmite: 2011-08-17 prEN 54-7 Fire detection and fre alarm systems - Part 7: Smoke detec- tors - Point detectors using scattered light, transmitted light or ionisation Fecha Lmite: 2011-08-17 prEN 54-22 Fire detection and fre alarm system - Part 22 : Resettable line type heat detectors Fecha Lmite: 2011-08-10 prEN 54-28 Fire detection and fre alarm system - Part 28: Non-resettable line type heat detectors Fecha Lmite: 2011-08-17 CEN/TC CALDERAS DE GAS PARA CALEFACCIN CENTRAL prEN 13203-4 Gas fred domestic appliances producing hot water - Part 4: assessment of energy consumption of gas fred appliances combined heat and power (micro CHP) producing hot water and electricity not exceeding 70 kW heat input, not exceeding 50 kWe electrical output and 500 l water storage capacity Fecha Lmite: 2011-03-29 CEN/TC SOLDADURA EN ISO 15792-1:2008/prA1 Welding consumables. Test methods. Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000/DAM 1:2010) Fecha Lmite: 2011-03-16 FprEN ISO 9012 Gas welding equipment - Air-aspirated hand blowpipes - Specifcations and tests (ISO 9012:2008) Fecha Lmite: 2011-08-17 FprEN ISO 26304 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-fux combinations for submerged arc welding of high strength steels - Classifcation (ISO/FDIS 26304:2011) Fecha Lmite: 2011-06-10 prEN ISO 14372 Welding personnel - Qualifcation testing of welding opera- tors for fully mechanized welding and weld setters for fully mechanized welding and automatic welding of metallic ma- terials (ISO/DIS 14732:2011) Fecha Lmite: 2011-08-24 prEN ISO 16834 Welding consumables - Wire electrodes, wires, rods and de- posits for gas-shielded arc welding of high strength steels - Classifcation (ISO/DIS 16834:2010) Fecha Lmite: 2011-03-29 prEN ISO 21952 Welding consumables - Wire electrodes, wires, rods and de- posits for gas-shielded arc welding of creep-resisting steels - Classifcation (ISO/DIS 21952:2010) Fecha Lmite: 2011-03-29 prEN ISO 24598 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/fux combinations for submerged arc welding of creep-resisting steels - Classifcation (ISO/DIS 24598:2010) Fecha Lmite: 2011-03-29 CEN/TC ERGONOMA FprEN 13861 Safety of machinery - Guidance for the application of ergo- nomics standards in the design of machinery Fecha Lmite: 2011-08-10 CEN/TC PRODUCTOS DE COLOCACIN DISCONTINUA PARA CUBIERTAS Y REVESTIMIENTO DE MUROS FprEN 490 Concrete roofng tiles and fttings for roof covering and wall cladding - Product specifcations Fecha Lmite: 2011-08-17 CEN/TC COBRE Y ALEACIONES DE COBRE prEN 13347 Copper and copper alloys - Rod and wire for welding and braze welding Fecha Lmite: 2011-08-17 prEN 13600 Copper and copper alloys - Seamless copper tubes for elec- trical purposes Fecha Lmite: 2011-08-17 prEN 13601 Copper and copper alloys - Copper rod, bar and wire for ge- neral electrical purposes Fecha Lmite: 2011-08-17 prEN 13602 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors Fecha Lmite: 2011-08-17 prEN 13603 Copper and copper alloys - Test methods for assessing pro- tective tin coatings on drawn round copper wire for electrical purposes Fecha Lmite: 2011-08-17 prEN 13604 Copper and copper alloys - Semiconductor devices, elec- tronic and vacuum products made from high conductivity copper Fecha Lmite: 2011-08-17 43 prEN 13605 Copper and copper alloys - Copper profles and profled wire for electrical purposes Fecha Lmite: 2011-08-17 CEN/TC EJECUCIN DE ESTRUCTURAS DE ACERO Y ALUMINIO EN 1090-2:2008/FprA1 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures Fecha Lmite: 2011-05-24 CEN/TC ENSAYOS NO DESTRUCTIVOS FprEN ISO 11699-1 Non-destructive testing - Industrial radiographic flm - Part 1: Classifcation of flm systems for industrial radiography (ISO 11699-1:2008) Fecha Lmite: 2011-08-24 FprEN ISO 11699-2 Non-destructive testing - Industrial radiographic flms - Part 2: Control of flm processing by means of reference values (ISO 11699-2:1998) Fecha Lmite: 2011-08-24 prEN ISO 2400 Non-destructive testing - Ultrasonic examination - Specifca- tion for calibration block No. 1 (ISO/DIS 2400:2011) Fecha Lmite: 2011-03-20 prEN ISO 3059 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO/DIS 3059:2011) Fecha Lmite: 2011-08-17 CEN/TC PINTURAS Y BARNICES prEN ISO 9117-6 Paints and varnishes. Drying tests. Part 6: Print-free test (ISO/ DIS 9117-6:2010) Fecha Lmite: 2011-03-16 prEN ISO 11997-2 Paints and varnishes. Determination of resistance to cyclic corrosion conditions. Part 2: Wet (salt fog)/dry/humidity/UV light (ISO/DIS 11997-2:2011) Fecha Lmite: 2011-08-03 prEN ISO 13076 Paints and varnishes. Lighting and procedure for visual as- sessments (ISO/DIS 13076:2010) Fecha Lmite: 2011-03-16 CEN/TC MAQUINARIA PARA LA TRANSFORMACIN DE LA MADERA. SEGURIDAD prEN 848-3 Safety of woodworking machines. One side moulding machi- nes with rotating tools . Part 3: Numerically controlled (NC) boring and routing machines Fecha Lmite: 2011-03-16 CEN/TC MQUINAS-HERRAMIENTA. SEGURIDAD EN 693:2001+A1:2009/FprA2:2009 Machine tools - Safety - Hydraulic presses Fecha Lmite: 2011-06-24 CEN/TC GRAS. SEGURIDAD prEN 13852-1 Cranes - Offshore cranes - Part 1: General purpose offshore cranes Fecha Lmite: 2011-08-10 CEN/TC MAQUINARIA Y EQUIPOS PARA LA INGENIERA CIVIL Y LA FABRICACIN DE MATERIALES DE CONSTRUCCIN. SEGURIDAD prEN 12110 Tunnelling machines - Air locks - Safety requirements Fecha Lmite: 2011-03-29 prEN 12111 Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements Fecha Lmite: 2011-03-29 prEN 16191 Tunnelling machinery - Safety requirements Fecha Lmite: 2011-03-29 CEN/TC RIDOS FprEN 12620 Aggregates for concrete Fecha Lmite: 2011-07-24 FprEN 13043 Aggregates for bituminous mixtures and surface treatments for roads, airfelds and other traffcked areas Fecha Lmite: 2011-07-24 FprEN 13139 Aggregates for mortar Fecha Lmite: 2011-08-03 FprEN 13242 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction Fecha Lmite: 2011-08-03 CEN/TC SISTEMAS DE TUBERAS Y CANALIZACIN DE MATERIALES PLSTICOS FprEN ISO 11296-1 Plastics piping systems for renovation of underground non- pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2009) Fecha Lmite: 2011-03-16 FprEN ISO 11296-3 Plastics piping systems for renovation of underground non- pressure drainage and sewerage networks. Part 3: Lining with close-ft pipes (ISO 11296-3:2009) Fecha Lmite: 2011-03-16 FprEN ISO 11296-4 Plastics piping systems for renovation of underground non- pressure drainage and sewerage networks. Part 4: Lining with close-ft pipes (ISO 11296-4:2009, corrected version 2010-06-01) Fecha Lmite: 2011-03-16 FprEN ISO 11298-1 Plastics piping systems for renovation of underground water supply networks. Part 1: General (ISO 11298-1:2010) Fecha Lmite: 2011-03-16 44 Normas Europeas FprEN ISO 11298-3 Plastics piping systems for renovation of underground water supply networks. Part 3: Lining with close-ft pipes (ISO 11298-3:2010) Fecha Lmite: 2011-03-16 prEN 15012 Plastics piping systems. Non pressure soil and waste dischar- ge piping components within the building structure. Requi- rements and test/assessment methods for pipes and fttings. Fecha Lmite: 2011-08-03 prEN 15013 Plastics piping systems. Non-pressure drainage and sewera- ge piping components buried in ground. Requirements and test/assessment methods for pipes and fttings Fecha Lmite: 2011-08-03 prEN 15014 Plastics piping systems. Buried and above ground piping com- ponents for water and other liquids under pressure. Require- ments and test/assessment methods for pipes and fttings Fecha Lmite: 2011-08-03 prEN 15015 Plastics piping systems. Hot and cold water piping compo- nents. Requirements and test/assessment methods for pipes and fttings Fecha Lmite: 2011-08-03 CEN/TC SISTEMAS DE VENTILACIN PARA EDIFICIOS FprCEN/TR 16244 Ventilation for hospitals Fecha Lmite: 2011-06-03 FprEN 15726 Ventilation for buildings - Air diffusion - Measurements in the occupied zone of airconditioned/ventilated rooms to eva- luate thermal and acoustic conditions Fecha Lmite: 2011-08-03 FprEN 15780 Ventilation for buildings - Ductwork - Cleanliness of venti- lation systems Fecha Lmite: 2011-08-10 CEN/TC PROTECCIN DE PIES Y PIERNAS prEN ISO 13287 Personal protective equipment - Footwear - Test method for slip resistance (ISO/DIS 13287:2011) Fecha Lmite: 2011-08-24 CEN/TC ROPA DE PROTECCIN INCLUYENDO PROTECCIN DE MANOS Y BRAZOS Y CHALECOS SALVAVIDAS prEN 469 Protective clothing for frefghters - Requirements and test methods for protective clothing for frefghting Fecha Lmite: 2011-08-17 prEN ISO 11611 Protective clothing for use in welding and allied processes (ISO/DIS 11611:2011) Fecha Lmite: 2011-08-24 prEN ISO 11612 Protective clothing - Clothing to protect against heat and fame - Minimum performance requirements (ISO/DIS 11612:2011) Fecha Lmite: 2011-08-24 prEN ISO 14116 Protective clothing - Protection against heat and fame - Li- mited fame spread materials, material assemblies and clo- thing (ISO/DIS 14116:2011) Fecha Lmite: 2011-08-24 CEN/TC GESTIN DE RESIDUOS prEN 16250-1 Levels of performance and acceptance for street cleaning and municipal waste management services - Part 1: General requirements Fecha Lmite: 2011-08-10 CEN/TC ELEMENTOS DE FIJACIN prEN ISO 10683 Fasteners - Non-electrolytically applied zinc fake coatings (ISO/DIS 10683:2011) Fecha Lmite: 2011-08-24 CEN/TC GEOSINTTICOS prEN ISO 10772 Test method for the determination of the fltration behaviour of geotextiles under turbulent water fow conditions. (ISO/ DIS 10772:2010) Fecha Lmite: 2011-03-28 prEN ISO 10776 Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, under load (ISO/DIS 10776:2010) Fecha Lmite: 2011-03-28 CEN/TC ADHESIVOS prEN 16254 Adhesives. Emulsion polymerized isocyanate (EPI) for load- bearing timber structures. Classifcation and performance requirements Fecha Lmite: 2011-08-10 CEN/TC FILTROS DE AIRE PARA LIMPIEZA DE AIRE EN GENERAL prEN ISO 29461-1 Air intake flter systems for rotary machinery. Test methods. Part 1: Static flter elements (ISO/DIS 29461-1:2010) Fecha Lmite: 2011-03-16 CEN/TC BOMBAS EN ISO 9905:1997/FprA1 Technical specifcations for centrifugal pumps - Class I - Amendment 1 (ISO 9905:1994/FDAM 1:2010) Fecha Lmite: 2011-03-29 EN ISO 9908:1997/FprA1 Technical specifcations for centrifugal pumps - Class III (ISO 9908:1993/FDAM 1:2010) Fecha Lmite: 2011-03-29 CEN/TC PIROTECNIA prEN 16256-2 Pyrotechnic articles. Theatrical pyrotechnic articles. Part 2: Categories of theatrical pyrotechnic articles Fecha Lmite: 2011-08-17 45 prEN 16256-4 Pyrotechnic articles. Theatrical pyrotechnic articles. Part 4: Minimum labelling requirements and instructions for use Fecha Lmite: 2011-08-17 prEN 16256-5 Pyrotechnic articles. Theatrical pyrotechnic articles. Part 5: Test methods Fecha Lmite: 2011-08-17 prEN ISO 14451-1 Pyrotechnic articles. Pyrotechnic articles for vehicles. Part 1: Terminology (ISO/DIS 14451-1:2011) Fecha Lmite: 2011-08-17 prEN ISO 14451-2 Pyrotechnic articles. Pyrotechnic articles for vehicles. Part 2: Test methods (ISO/DIS 14451-2:2011) Fecha Lmite: 2011-08-17 prEN ISO 14451-3 Pyrotechnic articles. Pyrotechnic articles for vehicles. Part 3: Labelling (ISO/DIS 14451-3:2011) Fecha Lmite: 2011-08-17 prEN ISO 14451-4 Pyrotechnic articles. Pyrotechnic articles for vehicles. Part 4: Requirements for micro gas generators (ISO/DIS 14451- 4:2011) Fecha Lmite: 2011-08-17 prEN ISO 14451-5 Pyrotechnic articles. Pyrotechnic articles for vehicles. Part 5: Requirements for airbag gas generators (ISO/DIS 14451- 5:2011) Fecha Lmite: 2011-08-17 prEN ISO 14451-6 Pyrotechnic articles. Pyrotechnic articles for vehicles. Part 6: Requirements for airbag modules (ISO 14451-6:2011) Fecha Lmite: 2011-08-17 prEN ISO 14451-7 Pyrotechnic articles. Pyrotechnic articles for vehicles. Part 7: Requirements for seatbelt pretensioners (ISO/DIS 14451- 7:2011) Fecha Lmite: 2011-08-17 prEN ISO 14451-8 Pyrotechnic articles. Pyrotechnic articles for vehicles. Part 8: Requirements for igniters (ISO/DIS 14451-8:2011) Fecha Lmite: 2011-08-17 prEN ISO 14451-9 Pyrotechnic articles. Pyrotechnic articles for vehicles. Part 9: Requirements for actuators (ISO/DIS 14451-9:2011) Fecha Lmite: 2011-08-17 CEN/TC DESINFECTANTES Y ANTISPTICOS QUMICOS prEN 14204 Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of mycobactericidal activity of chemi- cal disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1) Fecha Lmite: 2011-08-03 prEN 14349 Chemical disinfectants and antiseptics - Quantitative surfa- ce test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action - Test me- thod and requirements (phase 2, step 2) Fecha Lmite: 2011-08-03 CEN/TC MANGUERAS DE ELASTMEROS Y PLSTICOS Y SUS CONJUNTOS CON ACCESORIOS DE UNIN FprEN ISO 1825 Rubber hoses and hose assemblies for aircraft ground fue- lling and defuelling. Specifcation (ISO 1825:2010) Fecha Lmite: 2011-03-28 FprEN ISO 3994 Plastics hoses. Helical-thermoplastic-reinforced thermoplas- tics hoses for suction and discharge of aqueous materials. Specifcation (ISO 3994:2007) Fecha Lmite: 2011-03-28 FprEN ISO 8331 Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance (ISO 8331:2007) Fecha Lmite: 2011-03-28 CEN/TC MATERIALES PARA LA EJECUCIN DE CARRETERAS FprEN 12697-26 Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness Fecha Lmite: 2011-08-17 CEN/TC SISTEMAS DE CALEFACCIN PARA EDIFICIOS prEN 12828 Heating systems in buildings - Design for water-based hea- ting systems Fecha Lmite: 2011-08-10 CEN/TC ANLISIS DEL AGUA prEN 16161 Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples Fecha Lmite: 2011-03-29 CEN/TC INFRAESTRUCTURA GASSTICA prEN 12327 Gas infrastructure. Pressure testing, commissioning and de- commissioning procedures. Functional requirements Fecha Lmite: 2011-04-18 CEN/TC TEXTILES Y PRODUCTOS TEXTILES prEN ISO 6330 Textiles. Domestic washing and drying procedures for textile testing (ISO/DIS 6330:2010) Fecha Lmite: 2011-03-28 CEN/TC PLSTICOS FprEN ISO 15015 Plastics. Extruded sheets of impact-modifed acrylonitrile- styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods (ISO/FDIS 15015:2010) Fecha Lmite: 2011-03-16 46 Normas Europeas prEN 13067 Plastics welding personnel. Qualifcation testing of welders. Thermoplastics welded assemblies Fecha Lmite: 2011-07-24 prEN 13100-4 Non desctructive testing of welded joints of thermoplastics semifnished products. Part 4: High voltage testing Fecha Lmite: 2011-07-24 prEN 16245-1 Fibre-reinforced plastic composites. Declaration of raw ma- terial characteristics. Part 1: General requirements Fecha Lmite: 2011-07-24 prEN 16245-2 Fibre-reinforced plastic composites. Declaration of raw ma- terial characteristics. Part 2: Specifc requirements for resin, curing systems, additives and modifers Fecha Lmite: 2011-07-24 prEN 16245-3 Fibre-reinforced plastic composites. Declaration of raw ma- terial characteristics. Part 3: Specifc requirements for fbre Fecha Lmite: 2011-07-24 prEN 16245-4 Fibre-reinforced plastic composites. Declaration of raw ma- terial characteristics. Part 4: Specifc requirements for fabrics Fecha Lmite: 2011-07-24 prEN 16245-5 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Part 5: Specifc requirements for core materials Fecha Lmite: 2011-07-24 prEN ISO 5659-2 Plastics - Smoke generation - Part 2: Determination of opti- cal density by a single-chamber test (ISO/DIS 5659-2:2011) Fecha Lmite: 2011-08-03 CEN/TC EUROCDIGOS ESTRUCTURALES EN 1996-1-1:2005/FprA1 Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures Fecha Lmite: 2011-03-28 EN 1998-2:2005/FprA2 Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges Fecha Lmite: 2011-03-28 EN 1999-1-4:2007/FprA1 Eurocode 9: Design of aluminium structures - Part 1-4: Cold- formed structural sheeting Fecha Lmite: 2011-03-28 CEN/TC APLICACIONES FERROVIARIAS EN 14535-1:2005/FprA1 Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements Fecha Lmite: 2011-03-16 EN 15220-1:2008/FprA1 Railway applications - Brake indicators - Part 1: Pneumatica- lly operated brake indicators Fecha Lmite: 2011-03-16 EN 15595:2009/FprA1 Railway applications - Braking - Wheel slide protection Fecha Lmite: 2011-03-16 prEN 16185-1 Railway applications - Braking systems of multiple unit tra- ins - Part 1: Requirements and defnitions Fecha Lmite: 2011-03-29 prEN 16185-2 Railway applications - Braking systems of multiple unit tra- ins - Part 2: Test methods Fecha Lmite: 2011-03-29 prEN 16186-1 Railway applications - Drivers cab - Part 1: Visibility, layout, access Fecha Lmite: 2011-03-29 prEN 16251 Railway application - Environmental conditions - Design and test of rolling stock under severe conditions Fecha Lmite: 2011-08-10 CEN/TC RECUBRIMIENTOS METLICOS Y OTROS RECUBRIMIENTOS NO ORGNICOS FprEN ISO 6158 Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO/FDIS 6158:2011) Fecha Lmite: 2011-06-24 FprEN ISO 28706-1 Vitreous and porcelain enamels- Determination of resistance to chemical corrosion- Part 1: Determination of resistance to chemical corrosion by acids at room temperature (ISO 28706-1:2008) Fecha Lmite: 2011-03-25 FprEN ISO 28706-2 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion . Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours (ISO 28706-2:2008) Fecha Lmite: 2011-03-25 CMO HACER SUS PEDIDOS La adquisicin de normas UNE, as como de las normas y publicaciones nacionales y extranjeras distribuidas por AENOR, puede realizarse: Directamente en el Servicio de Publicaciones de AENOR en cualquiera de sus ofcinas. Cursando el pedido por carta, fax o correo electrnico: Gnova, 6 - 28004 MADRID Fax 91 310 36 95 comercial@aenor.es A travs de Internet: http://www.aenor.es 47 FprEN ISO 28706-3 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion . Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel (ISO 28706-3:2008) Fecha Lmite: 2011-03-25 FprEN ISO 28706-4 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion . Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2008) Fecha Lmite: 2011-03-25 CEN/TC CALIDAD DEL AIRE prEN 16253 Air quality - Atmospheric measurements near ground with Differential Optical Absorption Spectroscopy (DOAS) - Am- bient air and diffuse emission measurements Fecha Lmite: 2011-08-10 prEN ISO 13833 Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Ra- diocarbon sampling and determination Fecha Lmite: 2011-08-24 CEN/TC REDES DE TUBERAS INDUSTRIALES EN 13480-5:2002/FprA1 Metallic industrial piping - Part 5: Inspection and testing Fecha Lmite: 2011-03-29 CEN/TC EQUIPOS TERRESTRES DE APOYO PARA AERONAVES prEN 12312-2 Aircraft ground support equipment - Specifc requirements - Part 2: Catering vehicles Fecha Lmite: 2011-08-17 prEN 12312-4 Aircraft ground support equipment - Specifc requirements - Part 4: Passenger boarding bridges Fecha Lmite: 2011-08-17 prEN 12312-14 Aircraft ground support equipment - Specifc requirements - Part 14: Disabled/incapacitated passenger boarding vehicles Fecha Lmite: 2011-08-17 CEN/TC APARATOS DE USO DOMSTICO QUE UTILIZAN COMBUSTIBLES SLIDOS prEN 12809 Residential independent boilers fred by solid fuel - Nominal heat output up to 50 kw - Requirements and test methods Fecha Lmite: 2011-08-10 prEN 12815 Residential cookers fred by solid fuel - Requirements and test methods Fecha Lmite: 2011-08-10 prEN 13240 Room heaters fred by solid fuel. Requirements and test me- thods Fecha Lmite: 2011-08-03 CEN/TC CISTERNAS PARA EL TRANSPORTE DE MERCANCAS PELIGROSAS prEN 16257 Tanks for the transport of dangerous goods - Service equip- ment - Footvalve sizes other than 100 mm dia (nom) Fecha Lmite: 2011-08-17 CEN/TC SEMILLAS OLEAGINOSAS Y PRODUCTOS GRASOS DE ORIGEN ANIMAL Y VEGETAL Y SUBPRODUCTOS. MTODOS DE MUESTREO Y ANLISIS FprEN ISO 3961 Animal and vegetable fats and oils - Determination of iodine value (ISO 3961:2009) Fecha Lmite: 2011-08-10 CEN/TC CALZADO prEN ISO 16177 Footwear. Test methods for outsoles. Resistance to crack initiation and growth with Belt fex method (ISO/DIS 16177:2011) Fecha Lmite: 2011-08-17 CEN/TC TRANSPORTE. LOGSTICA Y SERVICIOS prEN 16258 Methodology for calculation and declaration on energy con- sumptions and GHG emissions in transport services (good and passengers transport) Fecha Lmite: 2011-08-17 CEN/TC ALIMENTOS PARA ANIMALES. MTODOS DE MUESTREO Y ANLISIS prEN 16160 Animal feeding stuffs - Determination of Hydrocyanic acid by HPLC Fecha Lmite: 2011-03-15 prEN 16162 Animal feeding stuffs - Determination of Decoquinate by HPLC with fuorescence detection Fecha Lmite: 2011-03-15 CEN/TC BIOCOMBUSTIBLES SLIDOS FprCEN/TR 15149-3 Solid biofuels. Determination of particle size distribution. Part 3: Rotary screen method Fecha Lmite: 2011-06-17 FprEN 15150 Solid biofuels. Determination of particle density Fecha Lmite: 2011-08-17 CEN/TC CONSERVACIN DEL PATRIMONIO CULTURAL prEN 16163 Conservation of cultural property - Exhibition lighting of cul- tural property Fecha Lmite: 2011-03-28 CEN/TC COMIT DE PROYECTO. COMPACTADORES. REQUISITOS DE SEGURIDAD prEN 16252 Machines for compacting waste materials or recyclable frac- tions - Horizontal baling presses - Safety requirements Fecha Lmite: 2011-08-10 48 Normas Europeas CEN/CLC/TC AUDITORAS ENERGTICAS prEN 16247-1 Energy audits - Part 1: General requirements Fecha Lmite: 2011-07-24 CLC/TC SMBOLOS GRFICOS UTILIZABLES PARA LOS EQUIPOS FprEN 62648 Graphical symbols for use on equipment - Guidelines for the inclusion of graphical symbols in IEC publications Fecha Lmite: 2011-09-02 CLC/TC CONDUCTORES PARA LNEAS ELCTRICAS AREAS FprEN 62641 Conductors for overhead lines - Aluminium and aluminium alloy wires for concentric lay stranded conductors Fecha Lmite: 2011-08-12 CLC/TC SUMINISTRO ELCTRICO Y SISTEMAS DE PUESTA A TIERRA DE LOS EQUIPOS DE TRANSPORTE PBLICO Y DE LOS APARATOS AUXILIARES (INSTALACIONES FIJAS) prEN 50152-1 Railway applications - Fixed installations - Particular requi- rements for alternating current switchgear -- Part 1: Circuit- breakers with nominal voltage above 1 kV Fecha Lmite: 2011-09-02 prEN 50152-2 Railway applications - Fixed installations - Particular requi- rements for alternating current switchgear -- Part 2: Discon- nectors, earthing switches and switches with nominal volta- ge above 1 kV Fecha Lmite: 2011-09-02 CLC/TC EQUIPOS DE MEDIDA DE LA ENERGA ELCTRICA Y DEL CONTROL DE CARGAS FprEN 62056-8-3 Electricity metering data exchange - The DLMS/COSEM suite -- Part 8-3: The PLC S-FSK profle for neighbourhood net- works Fecha Lmite: 2011-08-12 FprEN 62056-9-7 Electricity metering data exchange - The DLMS/COSEM suite -- Part 9-7: Communication profle for TCP-UDP/IP networks Fecha Lmite: 2011-08-12 CLC/TC MATERIALES AISLANTES FprEN 60819-3-3 Non-cellulosic papers for electrical purposes -- Part 3: Speci- fcations for individual materials -- Sheet 3: Unflled aramid (aromatic polyamide) papers Fecha Lmite: 2011-07-29 CLC/TC APARAMENTA PARA BAJA TENSIN, INCLUYENDO NORMALIZACIN DIMENSIONAL EN 60947-5-2:2007/FprA1 Low-voltage switchgear and controlgear -- Part 5-2: Control circuit devices and switching elements - Proximity switches Fecha Lmite: 2011-07-29 FprEN 61915-2 Low-voltage switchgear and controlgear - Device profles for networked industrial devices -- Part 2: Root device profles for starters and similar equipment Fecha Lmite: 2011-03-30 CLC/TC CONJUNTOS DE APARAMENTA PARA BAJA TENSIN FprEN 61439-4 Low-voltage switchgear and controlgear assemblies -- Part 4: Assemblies for construction sites (ACS) Fecha Lmite: 2011-08-12 CLC/TC CONDENSADORES DE POTENCIA FprEN 60143-2 Series capacitors for power systems -- Part 2: Protective equi- pments for series capacitor banks Fecha Lmite: 2011-09-02 CLC/TC LMPARAS EN 60809:1996/FprA5 Lamps for road vehicles - Dimensional, electrical and lumi- nous requirements Fecha Lmite: 2011-03-16 EN 62031:2008/FprA1 LED modules for general lighting - Safety specifcations Fecha Lmite: 2011-03-16 EN 62035:2000/FprA2 Discharge lamps (excluding fuorescent lamps) - Safety spe- cifcations Fecha Lmite: 2011-08-12 CLC/TC RESISTENCIAS FIJAS FprEN 60440 Method of measurement of non-linearity in resitors Fecha Lmite: 2011-03-31 CLC/TC NORMALIZACIN MECNICA DE LOS DISPOSITIVOS SEMICONDUCTORES FprEN 60191-6-12 Mechanical standardization of semiconductor devices -- Part 6-12: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fne-pitch land grid array (FLGA) Fecha Lmite: 2011-03-22 CLC/TC CONECTORES ELCTRICOS DE BAJA FRECUENCIA FprEN 60512-1-100 Connectors for electronic equipment - Tests and measure- ments -- Part 1-100: General - Applicable publications Fecha Lmite: 2011-09-02 FprEN 61076-2-101 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specifcation for M12 connectors with screw-locking Fecha Lmite: 2011-09-02 FprEN 61076-3-110 Connectors for electronic equipment - Product requirements -- Part 3-110: Detail specifcation for shielded, free and fxed con- nectors for data transmission with frequencies up to 1 000 MHz Fecha Lmite: 2011-08-05 49 FprEN 61076-4-116 Information technology - Cabling installation -- Part 1: Insta- llation specifcation and quality assurance Fecha Lmite: 2011-08-05 CLC/TC ESTRUCTURAS MECNICAS PARA EQUIPOS ELECTRNICOS FprEN 60297-3-107 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-107: Dimensions of subracks and plug-in units, small form factor Fecha Lmite: 2011-08-05 FprEN 61587-1 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 -- Part 1: Environmental require- ments and tests, safety aspects for cabinets, racks, subracks and chassis Fecha Lmite: 2011-03-22 CLC/TC DISPOSITIVOS PIEZOELCTRICOS PARA LA SELECCIN Y CONTROL DE LA FRECUENCIA FprEN 62276 Single Crystal Wafers for Surface Acoustic Wave (SAW) devices applications - Specifcation and measuring method Fecha Lmite: 2011-03-31 FprEN 62575-2 Radio frequency (RF) bulk acoustic wave (BAW) flters of as- sessed quality -- Part 2: Guide to the use Fecha Lmite: 2011-07-29 CLC/TC HILOS PARA BOBINAS ELECTROMAGNTICAS FprEN 60317-0-7 Specifcations for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect ena- melled winding wires Fecha Lmite: 2011-09-02 FprEN 60317-56 Specifcations for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled winding wire, class 180 Fecha Lmite: 2011-09-02 CLC/TC CONFIABILIDAD FprEN 62551 Analysis techniques for dependability - Petri net techniques Fecha Lmite: 2011-03-31 CLC/TC INFORMACIN A LOS CONSUMIDORES RELATIVA A LOS APARATOS ELECTRODOMSTICOS EN 61121:2011/FprAA Tumble dryers for household use - Methods for measuring the performance Fecha Lmite: 2011-07-22 FprEN 60704-2-6 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise -- Part 2-6: Particular requirements for tumble dryer Fecha Lmite: 2011-08-05 CLC/TC SEGURIDAD DE LOS APARATOS ELECTRODOMSTICOS Y ANLOGOS EN 62115:2005/FprAA Electric toys - Safety Fecha Lmite: 2011-05-27 CLC/TC EQUIPOS ELCTRICOS EN LA PRCTICA MDICA EN 60601-1:2006/FprA1 Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance Fecha Lmite: 2011-08-12 FprEN 60601-2-63 Medical electrical equipment -- Part 2-63: Particular require- ments for basic safety and essential performance of dental extra-oral x-ray equipment Fecha Lmite: 2011-09-02 FprEN 60601-2-65:201X Medical electrical equipment -- Part 2-65: Particular require- ments for basic safety and essential performance of dental intra-oral x-ray equipment Fecha Lmite: 2011-09-02 CLC/TC INSTALACIONES ELCTRICAS Y PROTECCIN CONTRA LOS CHOQUES ELCTRICOS FprHD 60364-5-559 Low-voltage electrical installations - Part 5-559: Selec- tion and erection of electrical equipment - Luminaires and lighting installations Fecha Lmite: 2011-03-29 FprHD 60364-7-714 Low-voltage electrical installations -- Part 7-714: Require- ments for special installations or locations - External lighting installations Fecha Lmite: 2011-03-29 FprHD 60364-7-715 Low-voltage electrical installations -- Part 7-715: Require- ments for special installations or locations - Extra-low-volta- ge lighting installations Fecha Lmite: 2011-03-29 CLC/TC SISTEMAS DE ALARMA prEN 50132-5-1 Alarm systems - CCTV surveillance systems for use in security applications -- Part 5-1: Video transmission - General video transmission performance requirements Fecha Lmite: 2011-03-15 prEN 50132-7 Alarm system -- CCTV surveillance systems for use in security applications -- Part 7: Application guidelines Fecha Lmite: 2011-09-02 CLC/TC PROTECCIN CONTRA EL RAYO EN 62561-5:2011/FprAA Lightning Protection System Components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals Fecha Lmite: 2011-05-27 50 Normas Europeas FprEN 62561-7 Lightning Protection System Components (LPSC) -- Part 7: Requirements for earthing enhancing compounds Fecha Lmite: 2011-03-16 CLC/TC APARATOS DE MEDIDA DE LAS MAGNITUDES ELECTROMAGNTICAS FprEN 62638 Recurrent test and test after repair and modifcation of elec- trical equipment Fecha Lmite: 2011-07-29 CLC/TC FIBRAS Y CABLES PTICOS FprEN 60793-2 Optical fbres -- Part 2: Product specifcations - General Fecha Lmite: 2011-08-12 CLC/TC SEGURIDAD DE LOS EQUIPOS ELECTRNICOS DE AUDIO/VDEO, TECNOLOGA DE LA INFORMACIN Y TECNOLOGA DE LA COMUNICACIN FprEN 50563 External a.c. - d.c. and a.c. - a.c. power supplies Determination of no-load power and average effciency of active modes Fecha Lmite: 2011-09-02 FprEN 62623 Measuring the energy consumption of desktop and notebo- ok computers Fecha Lmite: 2011-07-29 CLC/TC SISTEMAS DE AISLAMIENTO ELCTRICO (PROVISIONAL) FprEN 60544-5 Electrical insulating materials - Determination of the effects of ionizing radiation -- Part 5: Procedures for assessment of ageing in service Fecha Lmite: 2011-08-05 CLC/TC SEGURIDAD DE LAS HERRAMIENTAS ELCTRICAS A MOTOR FprEN 61029-2-8 Safety of transportable motor-operated electric tools -- Part 2-8: Particular requirements for single spindle vertical moulders Fecha Lmite: 2011-09-02 CLC/TC COMPATIBILIDAD ELECTROMAGNTICA (CEM) EN 61000-4-25:2002/FprA1 Electromagnetic compatibility (EMC) -- Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems Fecha Lmite: 2011-08-05 Normas Publicadas MARZO AECMA/TC ASOCIACIN EUROPEA DE INDUSTRIAS AEROESPACIALES EN 2240-052:2011 Aerospace series - Lamps, incandescent - Part 052: Lamp, code 1222 - Product standard EN 2240-053:2011 Aerospace series - Lamps, incandescent - Part 053: Lamp, code 1308 - Product standard EN 2240-054:2011 Aerospace series - Lamps, incandescent - Part 054: Lamp, code 1317 - Product standard EN 2240-055:2011 Aerospace series - Lamps, incandescent - Part 055: Lamp, code 1495 - Product standard EN 2240-056:2011 Aerospace series - Lamps, incandescent - Part 056: Lamp, code 1506 - Product standard EN 2240-057:2011 Aerospace series - Lamps, incandescent - Part 057: Lamp, code 1512 - Product standard EN 2240-058:2011 Aerospace series - Lamps, incandescent - Part 058: Lamp, code 1524 - Product standard EN 2240-059:2011 Aerospace series - Lamps, incandescent - Part 059: Lamp, code 1591 - Product standard EN 2240-060:2011 Aerospace series - Lamps, incandescent - Part 060: Lamp, code 1619 - Product standard CEN WS COMPETENCE OF SPECIALISTS ADVISING SMES CONCERNING INTEGRATED QUALITY, ENVIRONMENT, HEALTH AND SAFETY CWA 16275:2011 Guidelines for the selection of consultants advising SMEs on integrated quality, environment, health and safety manage- ment systems Realice su pedido de normas y publicaciones a travs de Internet http://www.aenor.es PEDIDOS EN LNEA 51 CEN/TC BOTELLAS PARA EL TRANSPORTE DE GAS EN ISO 22434:2011 Transportable gas cylinders - Inspection and maintenance of cylinder valves (ISO 22434:2006) CEN/TC CEMENTO Y CALES DE CONSTRUCCIN CEN/TR 16142:2011 Concrete - A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment CEN/TC ODONTOLOGA EN ISO 3107:2011 Dentistry - Zinc oxide/eugenol cements and zinc oxide/non- eugenol cements (ISO 3107:2011) CEN/TC VLVULAS INDUSTRIALES EN 593:2009+A1:2011 Industrial valves - Metallic butterfy valves CEN/TC EQUIPOS MANUALES PARA LA PROTECCIN CONTRA INCENDIOS CEN/TR 15642:2011 Unifed tests procedures for the tests of EN 3-7:2004+A1:2007 CEN/TC SOLDADURA EN ISO 544:2011 Welding consumables - Technical delivery conditions for f- ller materials and fuxes - Type of product, dimensions, tole- rances and markings (ISO 544:2011) EN ISO 4136:2011 Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2001) EN ISO 5178:2011 Destructive tests on welds in metallic materials - Longitudi- nal tensile test on weld metal in fusion welded joints (ISO 5178:2001) EN ISO 9015-1:2011 Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) EN ISO 9015-2:2011 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2003) EN ISO 9016:2011 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2001) EN ISO 17637:2011 Non-destructive testing of welds - Visual testing of fusion- welded joints (ISO 17637:2003) CEN/TC ALUMINIO Y ALEACIONES DE ALUMINIO EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coa- tings - Gravimetric method (ISO 2106:2011) EN ISO 8994:2011 Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2011) CEN/TC REVESTIMIENTOS TEXTILES Y RESILIENTES PARA SUELOS EN 548:2011 Resilient foor coverings - Specifcation for plain and deco- rative linoleum EN 649:2011 Resilient foor coverings - Homogenous and heterogenous polyvinyl chloride foor coverings - Specifcation EN 651:2011 Resilient foor coverings - Polyvinyl chloride foor coverings with foam layer - Specifcation EN 652:2011 Resilient foor coverings - Polyvinyl chloride foor coverings with cork-based backing - Specifcation CEN/TC DEPORTES, CAMPOS DE JUEGO Y OTRAS INSTALACIONES Y EQUIPOS DE RECREO EN 13089:2011 Mountaineering equipment - Ice-tools - Safety requirements and test methods CEN/TC PINTURAS Y BARNICES EN ISO 2811-1:2011 Paints and varnishes - Determination of density - Part 1: Pyk- nometer method (ISO 2811-1:2011) EN ISO 2811-2:2011 Paints and varnishes - Determination of density - Part 2: Im- mersed body (plummet) method (ISO 2811-2:2011) EN ISO 2811-3:2011 Paints and varnishes - Determination of density - Part 3: Os- cillation method (ISO 2811-3:2011) EN ISO 2811-4:2011 Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) CEN/TC MQUINAS-HERRAMIENTA. SEGURIDAD EN 12413:2007+A1:2011 Safety requirements for bonded abrasive products CEN/TC TRACTORES Y MAQUINARIA AGRCOLA Y FORESTAL EN 13683:2003+A2:2011 Garden equipment - Integrally powered shredders/chippers - Safety EN ISO 22868:2011 Forestry and garden machinery - Noise test code for portable hand-held machines with internal combustion engine - En- gineering method (Grade 2 accuracy) (ISO 22868:2011) CEN/TC SUMINISTRO DE AGUA EN 15975-1:2011 Security of drinking water supply - Guidelines for risk and crisis management - Part 1: Crisis management 52 Normas Europeas CEN/TC PTICA OFTLMICA EN 16128:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin CEN/TC COMPONENTES PREFABRICADOS ARMADOS DE HORMIGN CURADO EN AUTOCLAVE O DE RIDOS LIGEROS CON ESTRUCTURA ABIERTA EN 1520:2011 Prefabricated reinforced components of lightweight aggre- gate concrete with open structure with structural or non- structural reinforcement CEN/TC APARATOS QUE UTILIZAN GASES LICUADOS DE PETRLEO EN 624:2011 Specifcation for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats CEN/TC ELEMENTOS DE FIJACIN EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011) EN ISO 4016:2011 Hexagon head bolts - Product grade C (ISO 4016:2011) EN ISO 8765:2011 Hexagon head bolts with metric fne pitch thread - Product grades A and B (ISO 8765:2011) CEN/TC PRODUCTOS SANITARIOS NO ACTIVOS EN 13795:2011 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General re- quirements for manufacturers, processors and products, test methods, performance requirements and performance levels CEN/TC ANLISIS DEL AGUA EN ISO 5667-23:2011 Water quality - Sampling - Part 23: Guidance on passive sam- pling in surface waters (ISO 5667-23:2011) CEN/TC TEXTILES Y PRODUCTOS TEXTILES EN 15973:2011 Rubber- or plastic-coated fabrics - Upholstery fabrics - Resistance to soiling CEN/TC PLSTICOS EN ISO 10350-2:2011 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fbre-reinforced plastics (ISO 10350-2:2011) CEN/TC INFORMTICA SANITARIA EN ISO 11073-10404:2011 Health informatics - Personal health device communication - Part 10404: Device specialization - Pulse oximeter (ISO/IEEE 11073-10404:2010) EN ISO 11073-10407:2011 Health informatics - Personal health device communication - Part 10407: Device specialization - Blood pressure monitor (ISO/IEEE 11073-10407:2010) EN ISO 11073-10408:2011 Health informatics - Personal health device communication - Part 10408: Device specialization - Thermometer (ISO/IEEE 11073-10408:2010) EN ISO 11073-10415:2011 Health informatics - Personal health device communication - Part 10415: Device specialization - Weighing scale (ISO/IEEE 11073-10415:2010) EN ISO 11073-10417:2011 Health informatics - Personal health device communication - Part 10417: Device specialization - Glucose meter (ISO/IEEE 11073-10417:2010) EN ISO 11073-10471:2011 Health Informatics - Personal health device communication - Part 10471: Device specialization - Independant living acti- vity hub (ISO/IEEE 11073-10471:2010) EN ISO 11073-20601:2011 Health informatics - Personal health device communication - Part 20601: Application profle - Optimized exchange pro- tocol (ISO/IEEE 11073-20601:2010) CEN/TC APLICACIONES FERROVIARIAS EN 13262:2004+A2:2011 Railway applications - Wheelsets and bogies - Wheels - Pro- duct requirements EN 13979-1:2003+A2:2011 Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels EN ISO 3381:2011 Railway applications - Acoustics - Measurement of noise in- side railbound vehicles (ISO 3381:2005) CEN/TC TELEMTICA PARA EL TRFICO Y EL TRANSPORTE POR CARRETERA CEN/TR 16092:2011 Electronic fee collection - Requirements for pre-payment systems CEN/TR 16152:2011 Electronic fee collection - Personalisation and mounting of frst mount OBE EN 15876-2:2011 Electronic fee collection - Evaluation of on-board and road- side equipment for conformity to EN 15509 - Part 2: Abstract test suite CEN/TC CUERO EN ISO 17234-2:2011 Leather - Chemical tests for the determination of certain azo colorants in dyed leathers - Part 2: Determination of 4-ami- noazobenzene (ISO 17234-2:2011) CEN/TC TECNOLOGA DE LA INFORMACIN Y LA COMUNICACIN. REQUISITOS EUROPEOS DE LOCALIZACIN EN 13710:2011 European Ordering Rules - Ordering of characters from Latin, Greek, Cyrillic, Georgian and Armenian scripts 53 CEN/TC CALZADO EN ISO 10748:2011 Footwear - Test method for slide fasteners - Slider locking strength (ISO 10748:2011) CEN/TC EQUIPOS DE LABORATORIO EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15) CEN/TC BIOCOMBUSTIBLES SLIDOS EN 14961-5:2011 Solid biofuels - Fuel specifcations and classes - Part 5: Fi- rewood for non-industrial use EN 15234-1:2011 Solid biofuels - Fuel quality assurance - Part 1: General re- quirements CEN/TC LIGANTES BITUMINOSOS EN 12846-1:2011 Bitumen and bituminous binders - Determination of effux time by the effux viscometer - Part 1: Bituminous emul- sions EN 12846-2:2011 Bitumen and bituminous binders - Determination of effux time by the effux viscometer - Part 2: Cut-back and fuxed bituminous binders EN 13614:2011 Bitumen and bituminous binders - Determination of adhesi- vity of bituminous emulsions by water immersion test CEN/TC COMBUSTIBLES SLIDOS RECUPERADOS EN 15357:2011 Solid recovered fuels - Terminology, defnitions and descrip- tions EN 15358:2011 Solid recovered fuels - Quality management systems - Parti- cular requirements for their application to the production of solid recovered fuels EN 15400:2011 Solid recovered fuels - Determination of calorifc value EN 15402:2011 Solid recovered fuels - Determination of the content of vo- latile matter EN 15403:2011 Solid recovered fuels - Determination of ash content EN 15407:2011 Solid recovered fuels - Methods for the determination of car- bon (C), hydrogen (H) and nitrogen (N) content EN 15408:2011 Solid recovered fuels - Methods for the determination of sul- phur (S), chlorine (Cl), fuorine (F) and bromine (Br) content EN 15414-3:2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample EN 15440:2011 Solid recovered fuels - Methods for the determination of bio- mass content EN 15442:2011 Solid recovered fuels - Methods for sampling EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample CEN/TC MTODOS DE ANLISIS PARA ALRGENOS EN 1811:2011 Reference test method for release of nickel from all post as- semblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolon- ged contact with the skin CEN/TC SOSTENIBILIDAD EN LA CONSTRUCCIN EN 15643-2:2011 Sustainability of construction works - Assessment of buil- dings - Part 2: Framework for the assessment of environ- mental performance CEN/TC COMIT DE PROYECTO. ALCOHOLMETROS EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods CEN/CLC/TC GESTIN DE CALIDAD Y ASPECTOS GENERALES CORRESPONDIENTES A LOS PRODUCTOS SANITARIOS EN 15986:2011 Symbol for use in the labelling of medical devices - Requi- rements for labelling of medical devices containing phtha- lates CLC/TC SISTEMAS DE SEALIZACIN DEL TRFICO POR CARRETERA EN 50556:2011 Road traffc signal systems CLC/TC DISPOSITIVOS DE PROTECCIN CONTRA SOBRETENSIONES TEMPORALES EN 50550:2011 Power frequency overvoltage protective device for house- hold and similar applications (POP) CLC/TC MQUINAS ROTATIVAS CLC/TS 60034-18-33:2011 Rotating electrical machines - Part 18-33: Functional evalua- tion of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simul- taneous thermal and electrical stresses CLC/TS 60034-18-42:2011 Rotating electrical machines -- Part 18-42: Qualifcation and acceptance tests for partial discharge resistant electrical in- sulation systems (Type II) used in rotating electrical machines fed from voltage converters CLC/TS 60034-24:2011 Rotating electrical machines -- Part 24: Online detection and diagnosis of potential failures at the active parts of rotating elec- trical machines and of bearing currents - Application guide 54 Normas Europeas CLC/TS 60034-27:2011 Rotating electrical machines -- Part 27: Off-line partial dis- charge measurements on the stator winding insulation of rotating electrical machines TS 60034-18-33:2011 Rotating electrical machines - Part 18-33: Functional evalua- tion of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simul- taneous thermal and electrical stresses CLC/TC TURBINAS HIDRULICAS EN 62006:2011 Hydraulic machines - Acceptance tests of small hydroelectric installations CLC/TC APARAMENTA PARA ALTA TENSIN EN 62271-206:2011 High-voltage prefabricated switchgear and controlgear as- semblies -- Part 206: Voltage presence indicating systems CLC/TC CABLES ELCTRICOS EN 50363-0:2011 Insulating, sheathing and covering materials for low-voltage energy cables -- Part 0: General introduction EN 50363-2-1:2005/A1:2011 Insulating, sheathing and covering materials for low voltage energy cables -- Part 2-1: Cross-linked elastomeric sheathing compounds EN 50363-3:2005/A1:2011 Insulating, sheathing and covering materials for low voltage energy cables -- Part 3: PVC insulating compounds EN 50363-5:2005/A1:2011 Insulating, sheathing and covering materials for low voltage energy cables -- Part 5: Halogen-free, cross-linked insulating compounds EN 50363-6:2005/A1:2011 Insulating, sheathing and covering materials for low voltage energy cables -- Part 6: Halogen-free, cross-linked sheathing compounds EN 50363-8:2005/A1:2011 Insulating, sheathing and covering materials for low voltage energy cables -- Part 8: Halogen-free, thermoplastic shea- thing compounds EN 50395:2005/A1:2011 Electrical test methods for low voltage energy cables EN 50396:2005/A1:2011 Non electrical test methods for low voltage energy cables CLC/TC INTERRUPTORES PARA APARATOS EN 61058-2-5:2011 Switches for appliances -- Part 2-5: Particular requirements for change-over selectors CLC/TC EQUIPOS DE SOLDADURA POR ARCO ELCTRICO EN 60974-4:2011 Arc welding equipment - Part 4: Periodic inspection and tes- ting CLC/TC ELECTROACSTICA EN 62489-2:2011 Electroacoustics - Audio-frequency induction loop systems for assisted hearing -- Part 2: Methods of calculating and measuring the low-frequency magnetic feld emissions from the loop for assessing conformity with guidelines on limits for human exposure CLC/TC PILAS (ELEMENTOS PRIMARIOS Y BATERAS PRIMARIAS) EN 60086-1:2011 Piles primaires - Partie 1: Gnralits EN 60086-2:2011 Primary batteries - Part 2: Physical and electrical specifca- tions EN 60086-3:2011 Primary batteries - Part 3: Watch batteries CLC/TC SEGURIDAD DE LAS MQUINAS: ASPECTOS ELECTROTCNICOS EN 60204-33:2011 Safety of machinery - Electrical equipment of machines -- Part 33: Requirements for semiconductor fabrication equi- pment CLC/TC COMPONENTES PASIVOS DE MICROONDAS Y DE RADIOFRECUENCIA EN 61169-18:2011 Radio-frequency connectors -- Part 18: Sectional specifca- tion - Radio frequency coaxial connectors of type SSMA EN 61169-19:2011 Radio-frequency connectors -- Part 19: Sectional specifca- tion - Radio frequency coaxial connectors of type SSMB CLC/TC CIRCUITOS INTEGRADOS EN 62132-2:2011 Integrated circuits - Measurement of electromagnetic immu- nity -- Part 2: Measurement of radiated immunity - TEM cell and wideband TEM cell method SUSCRIPCIN NORMAS UNE Mantenga siempre actualizada la documentacin tcnica de su empresa. Contacte con el Servicio de Suscripciones Tel. 914 32 61 27 Fax 913 10 36 95 comercial@aenor.es http://www.aenor.es 55 CLC/TC DISPOSITIVOS DE SEMICONDUCTORES EN 60749-23:2004/A1:2011 Semiconductor devices - Mechanical and climatic test me- thods -- Part 23: High temperature operating life CLC/TC CONECTORES ELCTRICOS DE BAJA FRECUENCIA EN 60352-8:2011 Solderless connections - Part 8: Compression mount con- nections - General requirements, test methods and practical guidance CLC/TC CONFIABILIDAD EN 60300-3-12:2011 Dependability management - Part 3-12: Application guide - Integrated logistic support CLC/TC CONTROL DE LOS SISTEMAS ELCTRICOS DE POTENCIA Y COMUNICACIONES ASOCIADAS EN 61850-7-3:2011 Communication networks and systems for power utility au- tomation -- Part 7-3: Basic communication structure - Com- mon data classes CLC/TC EQUIPOS ELCTRICOS EN LA PRCTICA MDICA EN 60601-2-45:2011 Medical electrical equipment -- Part 2-45: Particular requi- rements for the basic safety and essential performance of mammographic X-ray equipment and mammographic ste- reotactic devices EN 80001-1:2011 Application of risk management for IT-networks incorpo- rating medical devices -- Part 1: Roles, responsibilities and activities CLC/TC INSTALACIONES ELCTRICAS EN LOS EDIFICIOS. PROTECCIN CONTRA LOS EFECTOS TRMICOS HD 60364-5-52:2011 Low-voltage electrical installations -- Part 5-52: Selection and erection of electrical equipment - Wiring systems CLC/TC INSTALACIONES ELCTRICAS Y PROTECCIN CONTRA LOS CHOQUES ELCTRICOS HD 60364-4-42:2011 Low voltage electrical installations -- Part 4-42: Protection for safety - Protection against thermal effects CLC/TC FIELDBUS EN 61804-32011 Function Blocks (FB) for process control - Part 3: Electronic Device Description Language (EDDL) CLC/TC EQUIPOS Y HERRAMIENTAS PARA TRABAJOS EN TENSIN EN 61236:2011 Live working - Saddles, stick clamps and their accessories CLC/TC SISTEMAS DE ALARMA EN 50518-3:2011 Monitoring and alarm receiving centre -- Part 3: Procedures and requirements for operation CLC/TC PROTECCIN CONTRA EL RAYO EN 62305-1:2011 Protection against lightning -- Part 1: General principles EN 62305-3:2011 Protection against lightning -- Part 3: Physical damages to structures and life hazard EN 62305-4:2011 Protection against lightning -- Part 4: Electrical and electro- nic systems within structures EN 62561-4:2011 Requirements for Lightning Protection System Components (LPSC) -- Part 4: Requirements for fasteners CLC/TC SISTEMAS DE CONVERSIN FOTOVOLTAICA DE LA ENERGA SOLAR EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating -- Part 1: Irradiance and temperature performance measurements and power rating EN 62116:2011 Test procedure of islanding prevention measures for utility- interconnected photovoltaic inverters CLC/TC CONECTORES DE FIBRA PTICA EN 50377-4-2:2011 Connector sets and interconnect components to be used in optical fbre communication systems - Product specifcations - Part 4-2: Type SC/APC simplex 8 terminated on IEC 60793- 2-50 of types B1.1 and B1.3 singlemode fbre, with full zirco- nia ferrule category U EN 50377-4-4:2011 Connector sets and interconnect components to be used in optical fbre communication systems - Product specifcations - Part 4-4: Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fbre, with full zirconia ferrule category U EN 50377-13-2:2011 Connector sets and interconnect components to be used in optical fbre communication systems - Product specifcations - Part 13-2: Type LX.5-PC DUPLEX terminated on IEC 60793- 2-50 category B1.1 and B1.3 singlemode fbre, with full zirco- nia ferrule category U EN 50377-13-3:2011 Connector sets and interconnect components to be used in optical fbre communication systems - Product specifcations - Part 13-3: Type LX.5-APC DUPLEX terminated on IEC 60793- 2-50 category B1.1 and B1.3 singlemode fbre, with full zirco- nia ferrule category U EN 50411-3-2:2011 Fibre organisers and closures to be used in optical fbre com- munication systems - Product specifcations -- Part 3-2: Sin- glemode mechanical fbre splice EN 61300-2-17:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-17: Tests - Cold 56 Normas Europeas EN 61300-2-23:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-23: Tests - Sealing for non-pressurized closures of fbre optic devices EN 61753-086-6:2011 Fibre optic interconnecting devices and passive components - Performance standard -- Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncon- trolled environment EN 61753-087-2:2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled en- vironment EN 61753-131-3:2011 Fibre optic interconnecting devices and passive compo- nents - Performance standard -- Part 131-3: Single-mode mechanical fbre splice for category U - Uncontrolled en- vironment CLC/TC FIBRAS PTICAS EN 61746-1:2011 Calibration of Optical Time-Domain Refectometers (OTDR) -- Part 1: OTDR for single-mode fbres EN 62496-2-2:2011 Optical circuit boards - Test and measurement procedures -- Part 2-2: Measurements: Dimensions of optical circuit boards EN 62496-3:2011 Optical circuit boards -- Part 3: Performance standards - Ge- neral and guidance EN 62496-4:2011 Optical circuit boards - Interface standards - Part 4: General and guidance CLC/TC RELS ELCTRICOS (COMIT INACTIVO) EN 62246-1:2011 Reed switches -- Part 1: Generic specifcation CLC/TC TRANSFORMADORES, REACTANCIAS Y FUENTES DE ALIMENTACIN DE BAJA POTENCIA Y ESPECIALES. REQUISITOS DE SEGURIDAD EN 61558-2-9:2011 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten flament lamps EN 61558-2-12:2011 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-12: Particular requirements and tests for constant voltage transformers and power su- pply units for constant voltage EN 61558-2-20:2011 Safety of transformers, reactors, power supply units and si- milar products for supply voltages up to 1100 V -- Part 2-20: Particular requirements and tests for small reactors CLC/TC EQUIPOS Y SISTEMAS DE AUDIO, VIDEO Y MULTIMEDIA EN 60268-7:2011 Sound system equipment -- Part 7: Headphones and earphones EN 60461:2011 Time and control code EN 61834-4:1998/A1:2011 Recording - Helical-scan digital video cassette recording sys- tem using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) -- Part 4: Pack header table and contents EN 61966-12-1:2011 Multimedia systems and equipment - Colour measurement and management -- Part 12-1: Metadata for identifcation of colour gamut (Gamut ID) EN 62458:2011 Sound system equipment - Electroacoustic transducers - Measurement of large signal parameters CLC/TC SEGURIDAD DE LOS EQUIPOS ELECTRNICOS DE AUDIO/VDEO, TECNOLOGA DE LA INFORMACIN Y TECNOLOGA DE LA COMUNICACIN EN 60065:2002/A12:2011 Audio, video and similar electronic apparatus - Safety requi- rements EN 60950-1:2006/A12:2011 Information technology equipment - Safety -- Part 1: General requirements CLC/TC SISTEMAS ELECTRNICOS EN VIVIENDAS Y EDIFICIOS EN 50090-1:2011 Home and Building Electronic Systems (HBES) -- Part 1: Stan- dardization structure CLC/TC REDES DE CABLE PARA SEALES DE TELEVISIN, SONIDO Y SERVICIOS INTERACTIVOS EN 60728-3:2011 Cable networks for television signals, sound signals and in- teractive services -- Part 3: Active wideband equipment for cable networks CLC/TC COMPATIBILIDAD ELECTROMAGNTICA (CEM) EN 61000-6-3:2007/A1:2011 Electromagnetic compatibility (EMC) - Part 6-3: Generic stan- dards - Emission standard for residential, commercial and light-industrial environments CLC/TC ASPECTOS ELECTROTCNICOS DE LOS EQUIPOS DE TELECOMUNICACIONES EN 50174-1:2009/A1:2011 Information technology - Cabling installation -- Part 1: Insta- llation specifcation and quality assurance ECISS/TC MTODOS DE ANLISIS QUMICOS EN 10351:2011 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] Procedimientos de Informacin 57 Reglamentos Tcnicos Relacin de los Proyectos de Reglamentos Tcnicos y de los Reglamentos relativos a los Servicios de la Sociedad de la Infor- macin notifcados a la Comisin Europea en el marco del pro- cedimiento de la Directiva 98/34/CE por los Estados miembros de la Comisin Europea y de la EFTA durante el mes de marzo. Estos proyectos se encuentran en Internet. El sitio Web est en Europa en la siguiente direccin: http://ec.europa.eu./enterprise/tris MARZO ALEMANIA Notifcacin: 2011/00092/D BNetzA SSB FE-OE 023 - Descripcin de interfaz para equi- pos de radioenlaces punto a punto en la banda de 71-76 GHz y 81-86 GHz. Fecha de observaciones: 03/06/2011 Notifcacin: 2011/00093/D BNetzA SSB FE-OE 030 - Descripcin de interfaz para equi- pos de radioenlaces punto a punto en la banda de 6,2 GHz. Fecha de observaciones: 03/06/2011 Notifcacin: 2011/00095/D Adiciones y modifcaciones de los principios bsicos para la evaluacin de los efectos de los productos de la construccin sobre el suelo y el agua subterrnea, parte II, proyecto de noviembre de 2010. Fecha de observaciones: 03/06/2011 Notifcacin: 2011/00105/D Norma General Administrativa para la aplicacin de los re- quisitos sobre proteccin medioambiental en la contrata- cin de suministros, obras y servicios (Norma Administrativa, Aprovisionamiento y medio ambiente - [VwVBU]). Fecha de observaciones: 09/06/2011 Notifcacin: 2011/00123/D Condiciones tcnicas de suministro y normas tcnicas de en- sayo relativas a puertas y prticos en tneles de carreteras (TL/TP TTT). Fecha de observaciones: 17/06/2011 Notifcacin: 2011/00144/D BNetzA SSB FE-OE 028 - Descripcin de interfaz para equi- pos de radioenlaces punto a punto en la banda de 7 GHz. Fecha de observaciones: 27/06/2011 Notifcacin: 2011/00145/D BNetzA SSB FE-OE 032 - Descripcin de interfaz para equi- pos de radioenlaces punto a punto en la banda de 6,8 GHz. Fecha de observaciones: 27/06/2011 Notifcacin: 2011/00146/D BNetzA SSB FE-OE 036 - Descripcin de interfaz para equi- pos de radioenlaces punto a punto en la banda de 42 GHz. Fecha de observaciones: 27/06/2011 AUSTRIA Notifcacin: 2011/00124/A Plan Federal de Gestin de Residuos 2011. Fecha de observaciones: 17/06/2011 Notifcacin: 2011/00151/A Reglamento por el que se establecen disposiciones relativas a la utilizacin y asignacin de frecuencias en el servicio de radio fjo y en el servicio de radio terrestre mvil no pblico en la banda de frecuencia de 29,7 a 925 MHz (Reglamento sobre equipos de radio - BFV). Fecha de observaciones: 30/06/2011 BULGARIA Notifcacin: 2011/00128/BG Ley sobre los juegos de azar. Fecha de observaciones: 20/06/2011 DINAMARCA Notifcacin: 2011/00109/DK Orden relativa a la modifcacin de la Orden de armas y mu- niciones, etc. Fecha de observaciones: 10/06/2011 Notifcacin: 2011/00121/DK Orden sobre las notifcaciones B de la Autoridad Martima Danesa, Reglamento tcnico sobre la construccin y el equi- pamiento de los buques. Fecha de observaciones: 16/06/2011 Ensayos no destructivos Manual de normas UNE Este nuevo manual incluye un conjunto de normas UNE con la terminologa, cualifcacin del personal y caractersticas de los ensayos no destructivos en funcin del tipo de material y del mtodo aplicado. 157 normas UNE con especifcaciones clasifcadas en los siguientes temas: Normas bsicas Soldadura y tcnicas conexas Siderurgia Metales ligeros y sus aleaciones Plsticos y caucho Maquinaria de elevacin y transporte Hormign 2010 CD-ROM - 70 ISBN: 978-84-8143-712-6 Ms informacin: 902 102 201 - aenor.publicaciones@aenor.es - www.aenor.es ediciones 58 Procedimientos de Informacin Notifcacin: 2011/00137/DK Decreto por el que se modifca el Decreto sobre etiquetado, etc. de los productos alimenticios. Fecha de observaciones: 24/06/2011 Notifcacin: 2011/00142/DK Directrices para las evaluaciones de seguridad de los com- plementos alimenticios. Fecha de observaciones: 27/06/2011 ESLOVAQUIA Notifcacin: 2011/00111/SK Reglamento por el que se modifca y complementa el Regla- mento n 397/1999 del Compendio de Leyes, que establece los detalles sobre los requisitos tcnicos y los procedimientos de evaluacin de la conformidad de las armas de fuego y la municin, modifcado. Fecha de observaciones: 13/06/2011 ESLOVENIA Notifcacin: 2011/00120/SI Decreto por el que se modifca el Decreto relativo a la ges- tin de envases y residuos de envases. Fecha de observaciones: 16/06/2011 FINLANDIA Notifcacin: 2011/00103/FIN Decreto que modifca el Decreto sobre armas de fuego. Fecha de observaciones: 06/06/2011 Notifcacin: 2011/00114/FIN Decreto relativo al ejercicio de actividades en el sector de los piensos (2011). Fecha de observaciones: 13/06/2011 Notifcacin: 2011/00116/FIN Decreto sobre la desactivacin de armas de fuego y la inuti- lizacin de componentes de armas de fuego. Fecha de observaciones: 15/06/2011 Notifcacin: 2011/00132/FIN Decreto relativo al control de los productos alimenticios (2011). Fecha de observaciones: 22/06/2011 FRANCIA Notifcacin: 2011/00097/F Decreto relativo a los riesgos fotobiolgicos de las lmparas y focos que utilizan diodos luminiscentes. Fecha de observaciones: 06/06/2011 Notifcacin: 2011/00102/F Orden por la que se introducen excepciones al artculo R.1333-2 del Cdigo de Salud Pblica para los detectores de humo con cmara de ionizacin. Fecha de observaciones: 06/06/2011 Notifcacin: 2011/00110/F Orden que modifca la Orden de 25 de junio de 1980, mo- difcada, relativa a la aprobacin de las disposiciones ge- nerales del Reglamento de seguridad contra los riesgos de incendio y de pnico en los establecimientos que reciben pblico. Fecha de observaciones: 13/06/2011 Notifcacin: 2011/00138/F Orden por la que se modifca la Orden de 15 de septiembre de 1982 relativa a la comercializacin de semillas de cereales de paja. Fecha de observaciones: 27/06/2011 Notifcacin: 2011/00139/F Orden por la que se modifca la Orden de 15 de septiembre de 1982 relativa a la comercializacin de semillas de plantas oleaginosas. Fecha de observaciones: 27/06/2011 Notifcacin: 2011/00140/F Orden por la que se modifca la Orden de 15 de septiembre de 1982 relativa a la comercializacin de semillas de plantas forrajeras. Fecha de observaciones: 27/06/2011 GRECIA Notifcacin: 2011/00084/GR Revisin del artculo 137 Helados, del Cdigo Helnico de Alimentos y Bebidas. Fecha de observaciones: 26/05/2011 Notifcacin: 2011/00125/GR Decisin para prohibir la comercializacin de productos de toallas comprimidas de tamao y forma que se puedan tragar, que no estn provistos del marcado y de las adverten- cias adecuadas sobre los riesgos potenciales para la salud y la seguridad de los nios. Fecha de observaciones: 20/06/2011 Cmo gestionar con xito una auditora interna conforme a ISO 9001:2008 Dirigida tanto a auditores como a entidades que estn inmersas en un proceso de auditora interna, proporciona herramientas, tcnicas y directrices para abordar la auditora desde los requisitos de ISO 9001:2008. Adems, permite conocer la efcacia de los procesos y ayuda a descubrir conclusiones que pueden contribuir al xito de una organizacin. Incluye un CD-ROM con unas prcticas plantillas que tienen como fn facilitar su personalizacin y ajustarlas a las necesidades especfcas de cada organizacin: ejemplos de modelos de proceso, listas de comprobacin para procesos comunes, ejemplo de preparacin de la auditora, formularios de auditora interna. 2010 - 192 pg. 40 Carton+CD-ROM 17x24 cm Ms informacin: 902 102 201 - aenor.publicaciones@aenor.es - www.aenor.es ediciones 59 Notifcacin: 2011/00143/GR Ley Distintivo de productos y servicios griegos. Fecha de observaciones: 27/06/2011 HOLANDA Notifcacin: 2011/00094/NL Decreto por el que se modifcan el Decreto relativo a las mercan- cas sobre la produccin y el tratamiento de los alimentos y el Decreto relativo a las mercancas sobre las sanciones administra- tivas, con respecto a la promocin del cumplimiento de la prohi- bicin de comerciar con anguilas contaminadas con dioxinas. Fecha de observaciones: (4) Notifcacin: 2011/00112/NL Normas para los servicios de control relacionados con pro- ductos estratgicos (Ley de servicios estratgicos). Fecha de observaciones: 13/06/2011 Notifcacin: 2011/00130/NL Reglamento por el que se modifca el Reglamento relativo a la ejecucin de la actividad de la pesca para implementar la Ley de modifcacin temporal de la Ley sobre la pesca de 1963. Fecha de observaciones: (4) Notifcacin: 2011/00147/NL Decreto por el que se establece una modifcacin al Decreto relativo a la adicin de micronutrientes a los alimentos (Ley de mercancas) en relacin a la ingesta diaria recomendada de vitaminas y minerales seleccionados. Fecha de observaciones: 27/06/2011 Notifcacin: 2011/00150/NL Reglamento por el que se modifca el Reglamento relativo a la calidad del suelo. Fecha de observaciones: 29/06/2011 HUNGRA Notifcacin: 2011/00107/HU Decreto Rural que modifca el Decreto n 66/2006 del Mi- nisterio de Agricultura y Asuntos Rurales (FVM), de 15 de septiembre de 2006, sobre determinadas normas de higiene alimentaria relativa a los productos alimenticios de origen animal. Fecha de observaciones: 10/06/2011 IRLANDA Notifcacin: 2011/00118/IRL Reglamento de 2011 relativo a la Ley sobre la Agencia Nacio- nal de Reservas de Petrleo (normas aplicables al etanol). Fecha de observaciones: 15/06/2011 ISLANDIA Notifcacin: 2011/09007/IS Rglement sur les lasers. Fecha de observaciones: 20/06/2011 Notifcacin: 2011/09008/IS Rglement sur ltiquetage et la traabilit des denres ali- mentaires et des aliments pour animaux gntiquement modifs. Fecha de observaciones: 20/06/2011 Notifcacin: 2011/09009/IS Rglement sur les niveaux maximaux dacides gras trans dans les denres alimentaires. Fecha de observaciones: 22/06/2011 Notifcacin: 2011/09010/IS Projet de loi pour un texte lgislatif modifant la loi no 6/2002 de lutte contre le tabagisme, telle que modife ultrieure- ment (tabac mcher). Fecha de observaciones: 27/06/2011 ITALIA Notifcacin: 2011/00122/I Decreto directivo relativo a: Medidas para la regulacin de la recaudacin a distancia de quinielas deportivas, de las apuestas mutuas sobre eventos distintos a las carreras de caballos, hpica nacional, hpica internacional y quinielas so- bre hpica. Fecha de observaciones: 16/06/2011 Notifcacin: 2011/00152/I Decreto ministerial relativo a la regulacin del empleo en los suplementos alimenticios de sustancias y preparados ve- getales. Fecha de observaciones: 30/06/2011 LITUANIA Notifcacin: 2011/00091/LT Orden relativa a la lista de productos de construccin regu- lados. Fecha de observaciones: 02/06/2011 MALTA Notifcacin: 2011/00091/MT Reglamento sobre la notifcacin de productos de 2011. Fecha de observaciones: 08/06/2011 NORUEGA Notifcacin: 2011/09006/N Rglement sur lusage des embarcations individuelles mo- teur. Fecha de observaciones: 08/06/2011 POLONIA Notifcacin: 2011/00106/PL Reglamento sobre los mtodos de toma de muestras del gas natural comprimido (GNC). Fecha de observaciones: 09/06/2011 Notifcacin: 2011/00113/PL Reglamento sobre las condiciones tcnicas de las infraes- tructuras del metro y su ubicacin. Fecha de observaciones: 13/06/2011 Notifcacin: 2011/00141/PL Reglamento que modifca el Reglamento relativo a las con- diciones tcnicas de la inspeccin tcnica en el mbito del diseo, fabricacin, explotacin reparacin y modernizacin de aparatos de presin especializados. Fecha de observaciones: 27/06/2011 REINO UNIDO Notifcacin: 2011/00101/UK Documento T957: Modifcaciones del BCAR T Edicin 3 .El presente documento modifca la publicacin de la Autoridad de Aviacin Civil (CAA) en materia de aviacin civil CAP 643 Requisitos britnicos de aeronavegabilidad civil Seccin T Autogiros ligeros. Fecha de observaciones: 06/06/2011 60 Procedimientos de Informacin Notifcacin: 2011/00108/UK Nuevas orientaciones consideradas reglamentaciones tcni- cas de facto segn el Reglamento sobre edifcacin (Escocia) de 2004 (modifcado). Fecha de observaciones: 10/06/2011 Notifcacin: 2011/00119/UK Orden relativa a la aprobacin del reglamento tcnico Do- cumento normativo relativo al diseo, fabricacin y funcio- namiento de instalaciones elctricas en edifcios, cdigo I -7: 2011. Fecha de observaciones: 15/06/2011 Notifcacin: 2011/00126/UK Nota de aviso provisional 124/10 Uso de los Eurocdigos para el diseo de estructuras de carreteras. Fecha de observaciones: 20/06/2011 Notifcacin: 2011/00127/UK Programa de incentivo del calor procedente de fuentes re- novables (RHI). Fecha de observaciones: 20/06/2011 Notifcacin: 2011/00149/UK Impuesto sobre la cerveza de alto grado alcohlico. Fecha de observaciones: (5) REPBLICA CHECA Notifcacin: 2011/00089/CZ Decreto por el que se modifca el Decreto del Gobierno n 615/2006 del Compendio de Leyes relativo a la fjacin de lmites de emisiones y otras condiciones para el uso de las restantes fuentes fjas de contaminacin atmosfrica. Fecha de observaciones: 30/05/2011 Notifcacin: 2011/00096/CZ Ley por la que se modifca la Ley n 18/1997 del Compendio de Leyes relativa al uso pacfco de la energa nuclear y de los equipos ionizantes (Ley atmica) y por la que se modifcan y complementan otras leyes, modifcada, y la Ley n 634/2004 del Compendio de Leyes sobre las tasas administrativas, mo- difcada. Fecha de observaciones: 03/06/2011 Notifcacin: 2011/00136/CZ Orden por la que se modifca la Orden n 467/2003 del Com- pendio de Leyes relativa a la utilizacin de etiquetas de tabaco durante el marcado de los productos del tabaco, modifcada. Fecha de observaciones: 24/06/2011 RUMANA Notifcacin: 2011/00098/RO Reglamento tcnico RO-IR 14 para la interfaz de radio relati- va a las radiocomunicaciones de banda ciudadana (CB). Fecha de observaciones: 06/06/2011 Notifcacin: 2011/00099/RO Reglamento tcnico RO-IR 15 para la interfaz de radio rela- tiva a las radiocomunicaciones en las bandas 446-446,1 MHz (PMR 446). Fecha de observaciones: 06/06/2011 Notifcacin: 2011/00100/RO Reglamento tcnico RO-IR 16 para la interfaz de radio relati- va al equipamiento de las DECT (telecomunicaciones digita- les europeas sin hilo). Fecha de observaciones: 06/06/2011 Notifcacin: 2011/00117/RO Orden relativa a la aprobacin del reglamento tcnico Do- cumento normativo relativo al diseo, fabricacin y funcio- namiento de instalaciones elctricas en edifcios, cdigo I -7: 2011. Fecha de observaciones: 15/06/2011 Notifcacin: 2011/00133/RO Orden relativa a la aprobacin del Reglamento tcnico Nor- ma para el clculo del golpe de ariete en las tuberas que transportan agua, cdigo NP 128: 2011. Fecha de observaciones: 24/06/2011 Notifcacin: 2011/00134/RO Orden relativa a la aprobacin del reglamento tcnico Gua para la equipacin de estructuras hidrulicas de retencin con dispositivos de medicin y de control DMC, cdigo GT 4:2011. Fecha de observaciones: 24/06/2011 Notifcacin: 2011/00135/RO Vehculos ferroviarios. Contenido de la documentacin tc- nica para el diseo, fabricacin, funcionamiento, moderniza- cin, reparacin, mantenimiento, conservacin y registros. Fecha de observaciones: 24/06/2011 Evaluacin de impacto ambiental de infraestructuras. Redaccin y tramitacin de documentos Mara Jos Carrasco Garca y lvaro Enrquez de Salamanca Este libro analiza el alcance, contenidos y objetivos de los documentos que integran el procedimiento de evaluacin de impacto ambiental en todas sus fases. Adems, realiza un estudio detallado del marco normativo estatal y autonmico, los agentes implicados y las autoridades ambientales competentes. Por su importancia, dedica un captulo especial a los proyectos que afectan a la Red Natura 2000, considerado el principal instrumento para la conservacin de la biodiversidad en la Unin Europea. 2010 Rstica 17 x 24 cm 288 pginas - 28 ISBN: 978-84-8143-710-2 Ms informacin: 902 102 201 - aenor.publicaciones@aenor.es - www.aenor.es ediciones 61 SUECIA Notifcacin: 2011/00090/S Reglamento sobre la aprobacin de dispositivos antiarran- que de vehculos en caso de alcoholemia excesiva de la Agencia Sueca de Transporte. Fecha de observaciones: 02/06/2011 Notifcacin: 2011/00115/S Decreto que modifca el Reglamento (1992:1554) relativo al control de estupefacientes. Fecha de observaciones: (4) Notifcacin: 2011/00129/S Reglamento sobre el control de los estupefacientes. Fecha de observaciones: 22/06/2011 Notifcacin: 2011/00131/S Reglamento sobre las listas de drogas. Fecha de observaciones: 22/06/2011 (1) Los textos traducidos al espaol de los proyectos que se relacionan a continuacin se encuentran 60 das antes de la fecha lmite para presentar observaciones, salvo los indicados en esta relacin con el nmero (7) en Internet. El sitio Web est en Europa en la siguiente direccin: http:// ec.europa.eu./enterprise/tris (2) Ao nmero de registro- Estado miembro autor. (3) Plazo durante el cual no podr adoptarse el proyecto. (4) No hay periodo de statu quo por haber aceptado la Comisin los motivos de urgencia alegados por el Estado miembro autor. (5) No hay periodo de statu quo por tratarse de especifcacio- nes tcnicas u otros requisitos vinculados a medidas fscales o fnancieras con arreglo al tercer guin del prrafo segundo del punto 11 del artculo 1 de la Directiva 98/34/CE. (6) Cerrado procedimiento de informacin. (7) No hay traduccin disponible de estos textos en espaol en el sitio Web, pero si en ingls y francs, 45 das antes de la fecha lmite para presentar observaciones. (8) El texto se corresponde con una norma internacional o europea, la cual est a disposicin del pblico en las oficinas de AENOR, bajo la forma de la norma UNE corres- pondiente. 62 Notifcaciones OMC Organizacin Mundial del Comercio MARZO ALBANIA Notifcacin: G/TBT/N/ALB/045 Draft Decision of Council of Ministers on approval of the te- chnical regulation On essential requirement and conformi- ty assessment of the noise emission in the environment by equipment for use outdoors, (86 pages, in Albanian). This Draft Decision aims to determine the requirements of the noise emission, conformity assessment procedures, mar- king, technical documentation related to the emission of noi- se in outdoor equipment. Objeto y razn de ser: This Technical Regulation applies to equipment for use outdoors listed in Articles 12 and 13 (of this Technical Regulation) and only covers equipment placed on the market or put into service as an entire unit suitable for the intended use. Additional equipment that excluded free- energy function, which are placed on the market or put into service with them, except for hand-held concrete-breakers and picks and for hydraulic hammers. ARABIA SAUD Notifcacin: G/TBT/N/SAU/221 The Kingdom of Saudi Arabia / Saudi Standards, Metrology and Quality Organization (SASO)/ lamp controlgear Part 2-3: Particular requirements for a.c. supplied electronic ba- llasts for fuorescent lamps (28 pages, in English). This regulation specifes particular safety requirements for electronic ballasts for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz with operating frequencies deviating from the supply frequency, associated with fuorescent lamps as specifed in IEC 60081 and IEC 60901, and other fuorescent lamps for high-frequency operation. Particular requirements for electronic ballasts with means of protection against over- heating are given in annex C. Particular requirements for a.c./d.c. supplied electronic ballasts for maintained emergen- cy lighting are given in annex J. Performance requirements are the subject of IEC 60929. Objeto y razn de ser: To ensure safety requirements for elec- tronic ballasts for use on a.c. supplies. Notifcacin: G/TBT/N/SAU/234 The Kingdom of Saudi Arabia / The Cooperation Council for the Arab States of the gulf draft technical regulation SUGARS (8 pages in Arabic and 5 pages in English). This Draft Technical Regulation This Standard applies to the following sugars intended for human consumption without further processing (synonyms are in round brackets). It in- cludes sugars sold directly to the fnal consumer and sugars used as ingredients in foodstuffs, defnitions, requirements, sampling, methods of the test and examination, packing, transportation, storage, labelling. Performance requirements are the subject of IEC 60929. Objeto y razn de ser: The preservation of a health, the safety of human and the prevention of deceptive practices. AUSTRALIA Notifcacin: G/TBT/N/AUS/065 Regulation Impact Statement for Pedestrian Safety (127 pa- ges, in English). The Australian Government is examining the case for regula- ting the pedestrian safety performance of light passenger ve- hicles and light goods vehicles through the Australian Design Rules (ADRs). It is proposed that an ADR be developed that adopts the international standard Global technical regula- tion No. 9 Pedestrian Safety, but with reduced scope. Objeto y razn de ser: As indicated in 6. The proposal repre- sents the normal ADR development process in responding to problems of road trauma in Australia. Where appropriate, ADRs are harmonised with United Nations standards. BRASIL Notifcacin: G/TBT/N/BRA/422 Draft Resolution No. 1, 14 January 2011 approves food additives for petit suisse cheese and their functions and maximum limits (3 pages, Portuguese). This Draft Resolution approves food additives for petit suisse cheese and their functions and maximum limits. When two or more food additives, with a determined maxi- mum limit are authorized for a certain function, the total amount used in the food cannot be superior to the establis- hed maximum limit of the additive in higher concentration. A quantum satis limit is not included in this food additive resolution. The resolution applies to all petit suisse cheese that is commercialized in Brazil. For establishments already operating, a period of 180 days will be granted after the date of adoption to adequate as this draft resolution. All establishments that will start their activities must attend the resolution before opening. Objeto y razn de ser: Protection of human health. CHINA Notifcacin: G/TBT/N/CHN/783 National Standard of the P.R.C., Pressure Vessels Part 2: Ma- terials (55 pages, in Chinese). This standard specifes the steel grades and their standards, additional technical requirements, scope of use (temperature and pressure) and allowable stress for steels permitted to be used in pressed components of pressure vessels. It is applica- ble to pressure vessels with design temperature ranging from -253 to 800, and design pressure is not exceeding 35MPa. Objeto y razn de ser: To protect personal and public safety. 63 Notifcacin: G/TBT/N/CHN/785 National Standard of the P.R.C., Pressure Vessels Part 4: Fa- brication, Inspection and Testing, and Acceptance (31 pages, in Chinese). This standard specifes the requirements for fabrication, ins- pection and testing, and acceptance of steel pressure ves- sels. It is applicable to the structures of pressure vessels as follows: single-layer welded pressure vessels, forged-welded pressure vessels, and layered pressure vessels (Including wrapped layered cylindrical segment, wrapped layered cylin- drical entirety, fat steel ribbon wound, and shrink ft pressu- re vessels). Objeto y razn de ser: To protect personal and public safety. Notifcacin: G/TBT/N/CHN/790 National Standard of the P.R.C., Fireworks and Firecracker - Black Powder (16 pages, in Chinese). This standard specifes the classifcations, requirements, test methods, inspection rules, package, marking, storage and transportation for black powder used in freworks and frecrackers. This standard applies to the production, sale, acceptance and storage of black powder used in freworks and frecrackers. It does not apply to black powder for civil explosive and military gunpowder. Objeto y razn de ser: Regulating the market and ensuring the safety of people. COLOMBIA Notifcacin: G/TBT/N/COL/158 Proyecto de Resolucin del Ministerio de Minas y Energa, Por la cual se expide el Reglamento Tcnico para Almacena- miento utilizado en la prestacin del servicio pblico domi- ciliario de Gas Licuado de Petrleo GLP en el Archipilago de San Andrs, Providencia y Santa Catalina (10 pginas, en espaol). Objeto; Campo de Aplicacin; Defniciones y siglas; Re- quisitos tcnicos para almacenamiento de respaldo; Obli- gaciones Generales; Diseo y Montaje; Ubicacin; Tanques, Equipos y Accesorios; Instalaciones Elctricas; Sistema de Seguridad y Contra Incendio; Procedimiento para la evalua- cin de la conformidad; Demostracin de la conformidad; Entidad de vigilancia y control; Rgimen sancionatorio; Vi- gencia y derogatorias. Objeto y razn de ser: Prevenir riesgos que puedan afectar la seguridad, la vida, la salud y el medio ambiente. COSTA RICA Notifcacin: G/TBT/N/CRI/113 RTCA 67.06.55.09 Buenas Prcticas de Higiene para Alimen- tos No Procesados (27 pginas, in Espaol). Establece las disposiciones generales sobre prcticas de hi- giene en alimentos no procesados, desde la recepcin de las materias primas, el procesamiento, el envasado, el almace- namiento y el transporte, para garantizar alimentos inocuos y aptos para el consumo humano. Estas disposiciones deben ser cumplidas por todos los esta- blecimientos de alimentos no procesados que operen, alma- cenen y distribuyan productos alimenticios en el territorio de los pases centroamericanos. Se excluyen del cumplimiento de este reglamento las activi- dades relacionadas con la produccin primaria, la industria de alimentos y bebidas procesadas, los servicios de la ali- mentacin al pblico y los expendios, las cuales se regirn por otras disposiciones sanitarias. Objeto y razn de ser: Informacin al Consumidor y evitar prc- ticas que induzcan a error o engao al consumidor. Notifcacin: G/TBT/N/CRI/114 RTCA 67.04.60:10 Etiquetado nutricional de productos ali- menticios preenvasados para consumo humano para la po- blacin a partir de 3 aos de edad (29 pginas, en Espaol). Este reglamento tiene por objeto establecer los requisitos mnimos que debe cumplir el etiquetado nutricional de productos alimenticios previamente envasados para consu- mo humano destinados a la poblacin a partir de 3 aos de edad y es aplicable al etiquetado de los productos ali- menticios previamente envasados que incluyan informacin nutricional, declaraciones nutricionales o saludables del ali- mento, de venta directa para el consumo humano y que se comercialicen en el territorio de los pases centroamericanos. Quedan excluidas del mbito de aplicacin del Reglamento las bebidas alcohlicas fermentadas y destiladas. Objeto y razn de ser: Informacin al Consumidor y evitar prc- ticas que induzcan a error o engao al consumidor. ECUADOR Notifcacin: G/TBT/N/ECU/068 Proyecto de Reglamento Tcnico Ecuatoriano RTE INEN 055 Aguas envasadas. Requisitos (8 pginas, en espaol). Este Proyecto de Reglamento Tcnico establece el objeto, campo de aplicacin, defniciones, disposiciones generales, clasifcacin, requisitos del producto, requisitos rotulado, ensayos para evaluar la conformidad, muestreo para el pro- ducto envasado, documentos normativos consultados o de referencia, demostracin del cumplimiento con el reglamen- to tcnico ecuatoriano, organismos encargados de la evalua- cin y la certifcacin de la conformidad, autoridad de fsca- lizacin y/o supervisin, tipo de fscalizacin y/o supervisin, rgimen de sanciones, responsabilidad de los organismos de evaluacin de la conformidad y revisin y actualizacin del reglamento tcnico, para Aguas envasadas. Objeto y razn de ser: Este Proyecto de Reglamento Tcnico Ecuatoriano establece los requisitos que deben cumplir las aguas envasadas, con la fnalidad de prevenir los riesgos para la salud y la vida de las personas y evitar prcticas que puedan inducir a error o confusin al consumidor. Notifcacin: G/TBT/N/ECU/069 Proyecto de Reglamento Tcnico Ecuatoriano RTE INEN 056 Carne y productos crnicos (11 pginas, en espaol). Este Proyecto de Reglamento Tcnico establece el objeto, campo de aplicacin, defniciones, condiciones generales, clasifcacin, requisitos del producto, requisitos rotulado, en- sayos para evaluar la conformidad, muestreo, documentos normativos consultados o de referencia, demostracin del cumplimiento con el reglamento tcnico ecuatoriano, orga- nismos encargados de la evaluacin y la certifcacin de la conformidad, autoridad de fscalizacin y/o supervisin, tipo de fscalizacin y/o supervisin, rgimen de sanciones, res- ponsabilidad de los organismos de evaluacin de la confor- midad y revisin y actualizacin del reglamento tcnico, para Carne y productos crnicos. Objeto y razn de ser: Este Proyecto de Reglamento Tcnico Ecuatoriano establece los requisitos que deben cumplir la carne y los productos crnicos, con la fnalidad de prevenir 64 Notifcaciones OMC los riesgos para la salud y la vida de las personas y evitar prcticas que puedan inducir a error a los usuarios. ESTADOS UNIDOS Notifcacin: G/TBT/N/USA/615 Declaration of Prion as a Pest under FIFRA and Amendment of EPAs Regulatory Defnition of Pests to Include Prion (7 pages, in English). EPA proposes to declare a prion (i.e., proteinaceous infectious particle) a pest under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), and to amend its regulations to expressly include prion within the regulatory defnition of pest. EPA currently considers a prion to be a pest under FIFRA, so a product intended to reduce the infectivity of any prion on inanimate surfaces (i.e., a prion-related product) is considered to be a pesticide and regulated as such. Any company seeking to distribute or sell a pesticide product regulated under FIFRA must obtain a section 3 registration, section 24(c) registration, or a section 18 emergency exemp- tion before it can be distributed or sold in the United Sta- tes. This proposed rule would codify the Agencys current interpretation of FIFRA, and provides interested parties the opportunity to comment about how it is adding prion to the list of pests in the regulatory defnition of pest. This amend- ment, together with the formal declaration that a prion is a pest, will eliminate any confusion about the status of prion- related products under FIFRA. Codifying the Agencys current interpretation of FIFRA will not change the manner in which EPA currently regulates prion-related products under FIFRA sections 3, 24(c) and 18. Regulating prion-related products under FIFRA is appropriate for protecting human health and the environment against unreasonable adverse effects and ensuring that such products are effective. Objeto y razn de ser: Protection of environment, human health and safety. Notifcacin: G/TBT/N/USA/616 Prescription Drug Products Containing Acetaminophen; Ac- tions to Reduce Liver Injury from Unintentional Overdose (7 pages, in English). The Food and Drug Administration (FDA) is taking steps to re- duce the maximum dosage unit strength of acetaminophen in prescription drug products. This change will provide an increa- sed margin of safety to help prevent liver damage due to ace- taminophen overdosing, a serious public health problem. This notice explains the reasons for the reduction in dosage unit strength and describes how FDA is implementing it for appro- ved prescription drug products that exceed the new maximum tablet or capsule strength. FDA is also requiring safety labeling changes, including a new boxed warning, for acetaminophen- containing prescription drug products to address new safety information about the risk of liver damage. NOTE: Sponsors of approved prescription drug products con- taining more than 325 milligrams (mg) of acetaminophen have until 14 January 2014 to request that FDA withdraw approval of the products application, after which they may be subject to action by FDA. Objeto y razn de ser: Protection of human health and safety. FRANCIA Notifcacin: G/TBT/N/FRA/122 Arrt relatif lapplication des articles R129-12 R129-15 du code de la construction et de lhabitation (6 pages, en franais). Le prsent texte prcise le type de dtecteur de fume installer dans les logements, les conditions de sa mise en oeuvre ainsi que les fonctions minimales quil doit remplir. Il nonce galement les mesures de scurit contre lincendie prvoir par les propritaires dans les parties communes des immeubles collectifs. Objeto y razn de ser: Le prsent arrt est pris suite au dcret dapplication de la loi n2010-238 du 9 mars 2010 qui rend obligatoire linstallation de dtecteurs de fume dans tous les lieux dhabitation. Il prcise dun point de vue technique les dispositifs noncs dans le dcret dapplication. GUATEMALA Notifcacin: G/TBT/N/GTM/068 RTCA 67.06.55.09 Buenas Prcticas de Higiene para Alimen- tos No Procesados (27 pginas, en espaol). Establece las disposiciones generales sobre prcticas de hi- giene en alimentos no procesados, desde la recepcin de las materias primas, el procesamiento, el envasado, el almace- namiento y el transporte, para garantizar alimentos inocuos y aptos para el consumo humano. Estas disposiciones deben ser cumplidas por todos los esta- blecimientos de alimentos no procesados que operen, alma- cenen y distribuyan productos alimenticios en el territorio de los pases centroamericanos. Se excluyen del cumplimiento de este reglamento las activi- dades relacionadas con la produccin primaria, la industria de alimentos y bebidas procesadas, los servicios de la ali- mentacin al pblico y los expendios, las cuales se regirn por otras disposiciones sanitarias. Objeto y razn de ser: Informacin al Consumidor y evitar prc- ticas que induzcan a error o engao al consumidor. HONDURAS Notifcacin: G/TBT/N/HND/065 RTCA 67.06.55:09 Buenas Prcticas de Higiene para los Ali- mentos no procesados (27 pginas, en espaol). Establecer las disposiciones generales sobre prcticas de hi- giene en alimentos no procesados, desde la recepcin de las materias primas, el procesamiento, el envasado, el almace- namiento y el transporte, para garantizar alimentos inocuos y aptos para el consumo humano. Estas disposiciones deben ser cumplidas por todos los esta- blecimientos de alimentos no procesados que operen, alma- cenen y distribuyan productos alimenticios en el territorio de los Estados Parte. Se excluyen del cumplimiento de este reglamento las activi- dades relacionadas con la produccin primaria, la industria de alimentos y bebidas procesadas, los servicios de la ali- mentacin al pblico y los expendios, las cuales se regirn por otras disposiciones sanitarias. Objeto y razn de ser: Inocuidad de los alimentos. 65 Notifcacin: G/TBT/N/HND/066 RTCA 67.04.60:10 Etiquetado Nutricional de productos ali- menticios preenvasados para consumo humano para la po- blacin a partir de 3 aos de edad (29 pginas, en espaol). Este reglamento tiene por objeto establecer los requisitos mnimos que debe cumplir el etiquetado nutricional de pro- ductos alimenticios previamente envasados para consumo humano destinados a la poblacin a partir de 3 aos de edad. Este reglamento es aplicable al etiquetado de los productos alimenticios previamente envasados que incluyan informa- cin nutricional, declaraciones nutricionales o saludables del alimento, de venta directa para el consumo humano y que se comercialicen en el territorio de los pases centro- americanos. Quedan excluidas del mbito de aplicacin del presente Re- glamento las bebidas alcohlicas fermentadas y destiladas. NOTA: Para el caso de Costa Rica aplicar el presente Regla- mento para ese tipo de productos. Objeto y razn de ser: Inocuidad de los alimentos INDONESIA Notifcacin: G/TBT/N/IDN/049 Draft Decree of Minister of Industry on Mandatory Imple- mentation of Indonesia National Standard for Rubber Seals for LPG steel cylinder valve (SNI 7655:2010) (8 pages, in In- donesia). This draft of decree states that all of Rubber seals for LPG steel cylinder valve products produced within the country or imported, distributed and marketed in the country shall fulfl the SNI requirements. The producers which produced these products therefore shall comply with the requirements of SNI proven by having Product Certifcate for Using SNI Mark and put SNI mark on every Rubber seal for LPG steel cylinder valve product. The product certifcate on SNI marking shall be issued by a Product Certifcation Body which has been designated by the Minister of Industry through: a. Testing of the conformity of the products quality against SNI requirements; and b. Audit on the implementation of the Quality Management System (QMS) SNI ISO 9001:2008 or its revision; or other re- cognized Quality Management System. Directorate General Manufactured Based Industry, Ministry of Industry is the institution that is responsible for the im- plementation of this decree and shall provide a technical guidance of the decree, which cover procedure of Product Certifcation and SNI Marking. Products which are distributed in domestic market that ori- ginated domestically and imported shall meet the require- ments consisted in SNI 7655:2010, Rubber seals for LPG steel cylinder valve, which specify term and defnition, quality requirements, sampling, testing method, testing acceptance, marking requirement and packaging (this standard is availa- ble in Indonesian language). Objeto y razn de ser: To protect consumers from safety aspect; to increase the product quality; and to establish fair trade competition. MXICO Notifcacin: G/TBT/N/MEX/208 PROY-NOM-029-SCT2/2010, Especifcaciones para la cons- truccin y reconstruccin de Recipientes Intermedios para Graneles (RIG), destinados al transporte de substancias, ma- teriales y residuos peligrosos (30 pginas, en espaol). El presente proyecto es de aplicacin obligatoria para los expedidores y destinatarios de los materiales peligrosos de ciertas clases, as como para los constructores y reconstructo- res de Recipientes Intermedios para Graneles (RIG). Los RIG que se entreguen para su transportacin debern cumplir con las especifcaciones establecidas en el presente Proyec- to. Con el fn de tener en cuenta los progresos de la ciencia y de la tcnica, se podr considerar la adopcin de mtodos alternativos de conformidad con la Ley Federal sobre Metro- loga y Normalizacin, siempre que stos ofrezcan durante la utilizacin de los RIG, las mismas condiciones de seguri- dad en cuanto a compatibilidad con las propiedades de las substancias que hayan de transportarse, e igual o superior resistencia a los choques, las cargas y el fuego. Objeto y razn de ser: Establecer las caractersticas para la clasifcacin y la clave de designacin de los Recipientes Intermedios para Graneles, as como las especifcaciones generales de construccin y ensayos (pruebas), aprobacin (certifcacin), y marcado de los mismos y las disposiciones relativas a su utilizacin, para proteger las vas generales de comunicacin, la seguridad de sus usuarios, la salud de las personas y el medio ambiente. Notifcacin: G/TBT/N/MEX/211 Vainilla de Papantla, extractos y derivados-Especifcaciones, informacin comercial y mtodos de ensayo (prueba) (10, pginas, en espaol). La vainilla [Vanilla fragrans (Salisbury)], syn. Vanilla plani- folia Andrews, Vanilla planifolia Jackson, es el aromatizante ms importante de la industria alimentaria; en especfco la Vainilla de Papantla es el producto ms estimado en los mercados por sus propiedades intrnsecas; lo que ha dado lugar al uso indiscriminado de dicho nombre, arriesgando en muchas ocasiones la reputacin del producto y su preferen- cia por el consumidor, tanto en el mercado nacional como en el internacional. Ante esta situacin y con fundamento en las disposiciones legales aplicables, en virtud de que la calidad y caracters- ticas que distinguen y hacen nica a la Vainilla de Papantla son atribuibles al medio geogrfco, a los factores naturales y a las prcticas de manejo, los cuales son requisitos indispen- sables para constituir una Denominacin de Origen. Los requisitos generales que deben cumplirse para la certifca- cin de la Vainilla de Papantla, se establecen en este proyecto de norma ofcial mexicana, por lo que a partir de la fecha de entrada en vigor de la misma, el nombre Vainilla de Papantla ser de uso exclusivo para los productos que se encuentren amparados por la Denominacin de Origen correspondiente, por lo tanto su uso indebido ser sancionado conforme a los lineamientos administrativos y legales aplicables. La Vainilla de Papantla, as como sus extractos y derivados preenvasados deben cumplir con la informacin comercial indicada en la norma ofcial mexicana NOM-051-SCFI/SSA1- 2010. Objeto y razn de ser: Establecer las especifcaciones que de- ben cumplir la vainilla verde, la vainilla benefciada y los extractos o derivados de los frutos de la vainilla que se pro- duzcan en la zona protegida con la Denominacin de Origen para la Vainilla de Papantla, sus mtodos de ensayo (prueba) e indicaciones de informacin comercial 66 Notifcaciones OMC NICARAGUA Notifcacin: G/TBT/N/NIC/113 NTON 03 093 10/RTCA 67.06.55.09 Buenas Prcticas de Higiene para Alimentos no Procesados (27 pginas, en es- paol). Establece las disposiciones generales sobre prcticas de hi- giene en alimentos no procesados, desde la recepcin de las materias primas, el procesamiento, el envasado, el almace- namiento y el transporte, para garantizar alimentos inocuos y aptos para el consumo humano. Estas disposiciones deben ser cumplidas por todos los esta- blecimientos de alimentos no procesados que operen, alma- cenen y distribuyan productos alimenticios en el territorio de los pases centroamericanos. Se excluyen del cumplimiento de este reglamento las activi- dades relacionadas con la produccin primaria, la industria de alimentos y bebidas procesadas, los servicios de la ali- mentacin al pblico y los expendios, las cuales se regirn por otras disposiciones sanitarias. Objeto y razn de ser: Informacin al consumidor y evitar prc- ticas que induzcan a error o engao al consumidor. QATAR Notifcacin: G/TBT/N/QAT/226 Gluten free foods (7 pages in Arabic, 7 pages in English). This draft technical regulation is concerned with the foods for special dietary uses that have been formulated, processed or prepared to meet the special dietary needs of people intole- rant to gluten. Foods for general consumption which by their nature are suitable for use by people with gluten intolerance, defnitions, requirements, sampling, methods of tests and exa- mination, packaging, translation and storage and labelling. Objeto y razn de ser: To maintain quality of this product, con- sumer protection and marketing relation of GCC countries and food safety. REPBLICA CHECA Notifcacin: G/TBT/N/CZE/148 Draft - Measure of a General Nature, stipulating metrological and technical requirements for specifed measuring devices, including test methods for type approval and verifcation of specifed measuring devices: process gas chromatographs for determination of the energy content of natural gas (10 pages, in Czech). This measure of a general nature stipulates metrological and technical requirements for specifed measuring devices, in- cluding test methods for verifcation of specifed measuring devices, which in this case are process gas chromatographs for determination of the energy content of natural gas. Objeto y razn de ser: Process gas chromatographs for deter- mination of the energy content of natural gas are specifed measuring devices in accordance with Section 3(3) of Act No. 505/1990 Coll., on metrology, as amended, and are thus subject to State metrological control, i.e. type approval and verifcation. Currently, specifc metrological and technical requirements are contained in national technical standards. This state of affairs needs to be rectifed by including requi- rements in a binding Measure of a General Nature in accor- dance with Section 24c of Act No. 505/1990 Coll., on metrolo- gy, as amended, to prevent the occurrence of problems with their enforceability. Notifcacin: G/TBT/N/CZE/149 Draft - Measure of a General Nature, stipulating metrological and technical requirements for specifed measuring devices, including test methods for type approval and verifcation of specifed mea- suring devices: measuring devices used to determine therapeutic dosages during medical irradiation (10 pages, in Czech). This measure of a general nature stipulates metrological and technical requirements for specifed measuring devices, in- cluding test methods for verifcation of specifed measuring devices, which in this case are measuring devices used to determine therapeutic dosages during medical irradiation. Objeto y razn de ser: Measuring devices used to determine therapeutic dosages during medical irradiation are speci- fed measuring devices in accordance with Section 3(3) of Act No. 505/1990 Coll., on metrology, as amended, and are thus subject to State metrological control, i.e. type approval and verifcation. Currently, specifc metrological and techni- cal requirements are contained in national technical stan- dards. This state of affairs needs to be rectifed by including requirements in a binding Measure of a General Nature in accordance with Section 24c of Act No. 505/1990 Coll., on metrology, as amended, to prevent the occurrence of pro- blems with their enforceability. SINGAPUR Notifcacin: G/TBT/N/SGP/010 Draft Proposed Food (Amendment) Regulations 2011. The Agri-Food & Veterinary Authority of Singapore (AVA) has reviewed the Food Regulations and proposes the following amendments: (i) adoption of a trans fat limit of 2g per 100g product for fats and oils, with mandatory trans fat labelling for retail packs, as part of Singapores national effort to reduce trans fat in- take of the local population. (ii) new requirements in the area of food labelling: net quan- tity declaration of prepacked foods, drained weight declara- tion of food packed in liquid media and weight declaration of frozen foods. Prepacked foods containing ingredients which are potential food allergens will need to be specif- cally labelled to inform consumers of the presence of these ingredients. The list of prepacked foods required to be date- marked with the expiry date will be expanded to include ready-to-eat minimally processed fruits and vegetables (such as cut fruits and vegetables) as these products are highly pe- rishable. A list of permitted health claims, and the criteria for their use on food labels and advertisements are specifed in the amendments to the regulations. (iii) revised requirements for import permit declaration (for im- ported foods): food products with no brand name at the time of application for import permit will have to be declared using either: the name of the overseas manufacturer or the intended brand names. This is important for source tracing purposes. Objeto y razn de ser: Protection of human health. SUDFRICA Notifcacin: G/TBT/N/ZAF/133 Proposed regulations regarding control over the sale of free range eggs and poultry meat and barn eggs in the Republic of South Africa (7 pages, in English). The proposed regulation sets out restrictions, general ma- nagement practices for free range and barn eggs, feeding requirements, environmental requirements, health require- ments, processing and packaging, distribution and retailing practices, labelling and marking of free range eggs, barn eggs and poultry meat. 67 The proposed regulations set a minimum production stan- dard for free range eggs and poultry meat, and barn eggs, and regulates the indication of free range and barn on these products. Objeto y razn de ser: Consumer safety and labelling require- ments. Notifcacin: G/TBT/N/ZAF/134 Proposed regulations relating to the classifcation, packing and marking of fat spreads intended for sale in the Republic of South Africa (10 Pages, in English). The proposed regulations set out quality standards for fat spreads (less than 50% milk fat) based on the fat content and prescribes the class name (such as margarine, X% Fat Spread, etc.), labelling and packing requirements, but do not address food safety issues. Objeto y razn de ser: Consumer information and labelling re- quirements, product standardisation. SUIZA Notifcacin: G/TBT/N/CHE/131 Decree of the Federal Offce for Communications on te- lecommunications installations (OOIT) (3 pages in French and German). Partial revision of the Decree of the Federal Offce for Com- munications on telecommunications installations (OOIT). The size of the equipment class identifer has been defned as it is in the European Directive 1999/5/EC: it has to have the same height as the conformity mark. Furthermore, the consequences of changes in technical standards which, if applied, bring presumption of conformity with the essential requirements, have been precised. Some radio interface re- gulations have also been updated to take in account chan- ges occurred in the spectrum management. The number of possible channel bandwidths in some fxed links frequency bands have been reduced. The possibility to use adapti- ve coded modulation (ACM) has been introduced in some fxed links frequency bands. Technical parameters for plan- ning issues have been precised in some fxed links frequen- cy bands. The possibility to use Automatic Transmite Power Control (ATPC) in the frequency band of 51.40 52.60 GHz has been introduced. Technical parameters for IMT-2000/ UMTS equipment (base stations, user equipment and re- peaters) in the 2500-2570 MHz and 2620-2690 MHz fre- quency bands have been defned. The maximum radiated power for DECT equipment has been reestablished to 250 mW EIRP. No new licenses for mobile/portable analogue voice applications ancillary to broadcasting will be granted in the 477.05 517.975 MHz frequency band. Technical parameters for non safety applications in the feld of intelli- gent transportation systems (ITS) in the frequency band 63 64 GHz have been defned. The 17.1-17.3 GHz frequency will be open for all ground based systems and not only for ground based synthetic aperture radars (GBSAR). Wireless microphones with a maximum radiated power of 1 mW ERP may be used in the 826 832 MHz frequency band without a license. Some minor editorial changes have also been made to some other radio interface regulations. Objeto y razn de ser: OOIT must be amended in preparation of the introduction of the digital dividend in Switzerland, permit the introduction of new applications in some fre- quency bands and precise the use of some other frequency bands. TAIWN Notifcacin: G/TBT/N/TPKM/097 Public Notice under the Commodity Inspection Act (2 pages, in Chinese) (English translation available). The presence of free formaldehyde, azo colorants and other hazardous chemical substances resulted from the processing of textile products, which usually involves the use of various kinds of dyes, auxiliaries and fnishing agents, has been a great concern expressed by the public over the past years. As these hazardous substances are considered to be carci- nogenic or toxic to human, in response to the requests of the public, the BSMI intends to regulate the safety of textile products possibly with direct contact to skin to protect the health of consumers. The proposed measure also specifes monitor inspection as the conformity assessment procedure for ensuring compliance of textile products with safety re- quirements. Objeto y razn de ser: Consumer protection. UNIN EUROPEA Notifcacin: G/TBT/N/EEC/360 Draft Commission Regulation on the authorisation and refu- sal of authorisation of certain health claims made on foods and referring to childrens development and health (11 pa- ges, in English). This draft Commission Regulation concerns the authorisa- tion and refusal of authorisation of health claims made on foods and referring to childrens development and health in accordance with Article 17(3) of Regulation (EC) No 1924/2006 of the European Parliament and of the Council of 20 December 2006 on nutrition and health claims made on foods. Objeto y razn de ser: The proposed measure concerns eight health claims applications that have been assessed by the European Food Safety Authority (EFSA). For three applica- tions, appropriate conditions of use can not be set in accor- dance with Article 16(4) of the Regulation (EC) No 1924/2006, and therefore they will not be authorised for use on foods. For fve applications the assessments are considered to be favourable. Therefore as three health claims (referred to in fve applications) comply with the conditions set out Regu- lation (EC) No 1924/2006 they will be authorised for use on foods. Notifcacin: G/TBT/N/EEC/362 Draft Commission Regulation implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for air conditioners and comfort fans (24 pages, in English). This draft Commission Regulation sets minimum energy performance, maximum sound power level and information requirements for air conditioners, as there exists a cost-effec- tive potential to limit their energy consumption. The draft Regulation also sets information requirements for comfort fans. In accordance with Framework Directive 2009/125/EC, products not meeting these requirements will not be allowed to be placed on the EU market. The draft Regulation is based on the fndings of a technical, environmental and economic study which has been carried out with stakeholder from around the world. Objeto y razn de ser: Fight against climate change and increa- se of energy effciency in the EU. SEDE SOCIAL: Gnova, 6 28004 MADRID Tel. 902 102 201 Fax 913 104 032. info@aenor.es www.aenor.es ANDALUCA: Leonardo da Vinci, 2 Isla de la Cartuja 41092 SEVILLA Tel.: 954 468 010 Fax: 954 460 407 aenorandalucia@iat.es Marie Curie, 4, local D2 Parque Tecnolgico de Andaluca 29590 CAMPANILLAS (Mlaga) Tel.: 952 028 710 Fax: 952 020 480 aenorandalucia@iat.es ARAGN: P. Sagasta, 72, entlo. dcha. 50006 ZARAGOZA Tel.: 976 259 680 Fax: 976 251 748 dar@aenor.es CANARIAS: General Vives, 56, 2 E. Of. 202 Edifcio Primo de Rivera 35007 LAS PALMAS DE G.C. Tel.: 928 263 327 Fax: 928 472 106 canarias@aenor.es La Marina, 26 Torre A. Of. 301-A 38001 SANTA CRUZ DE TENERIFE Tel.: 922 531 332 Fax: 922 284 631 canarias@aenor.es CANTABRIA: Eduardo Benot, 5, 1 B y C 39003 SANTANDER Tel. 942 318 844 Fax 942 364 789 cantabria@aenor.es CASTILLA Y LEN: Marina Escobar, 2, entreplanta 47001 VALLADOLID Tel.: 983 549 740 Fax: 983 548 743 dcyl@aenor.es CASTILLA-LA MANCHA: Reino Unido, 3, 2 planta, of. 2 45005 TOLEDO Tel.: 925 258 750 Fax: 925 258 752 castillalamancha@aenor.es CATALUA: Tnger, 98, 8 planta Edifcio Interface 08018 BARCELONA Tel.: 932 292 929 Fax: 932 261 559 dct@aenor.es COMUNIDAD VALENCIANA: Pl. del Ayuntamiento, 26, 4 46002 VALENCIA Tel.: 963 535 373 Fax: 963 522 147 dcv@aenor.es Av. Maisonnave, 19, 7 izda. 03003 ALICANTE Tel.: 965 984 954 Fax: 965 926 847 dcv@aenor.es EXTREMADURA: Centro de Negocios Mrida Av. Reina Sofa esquina Benito Arias Montano, ofcina n 6 2 planta 06800 MRIDA Tel.: 924 387 754 - Fax: 924 303 029 extremadura@aenor.es GALICIA: Enrique Marias, 36, 7 Edifcio Torre Cristal 15009 A CORUA Tel.: 981 175 080 Fax: 981 290 705 galicia@aenor.es Av. Garca Barbn, 29, 1D 36201 VIGO Tel.: 986 443 554 Fax: 986 227 059 galicia@aenor.es ISLAS BALEARES: Porto Pi, 8, 6 A 07015 PALMA DE MALLORCA Tel.: 971 707 068 Fax: 971 404 736 baleares@aenor.es LA RIOJA: Av. Gran Va, 59, 1 planta 26005 LOGROO Tel.: 941 202 950 Fax: 941 228 478 larioja@aenor.es MADRID: Gnova, 6 28004 MADRID Tel.: 915 294 900 Fax: 915 294 949 Madrid@aenor.es NAVARRA: Av. Carlos III, 1, 1 planta 31002 PAMPLONA Tel.: 948 206 330 Fax: 948 229 803 navarra@aenor.es PAS VASCO: Ibez de Bilbao, 28, 3 D 48009 BILBAO Tel.: 944 355 200 Fax: 944 247 370 dpv@aenor.es PRINCIPADO DE ASTURIAS: Parque Cientfco Tecnolgico de Gijn Edifcio FADE. Profesor Potter, 51 33203 GIJN Tel.: 985 196 011 Fax: 985 373 722 dpa@aenor.es REGIN DE MURCIA: rea de Negocios Plazarte Jos Manuel Snchez-Pedreo, 1 of. 5B El Ranero 30009 MURCIA Tel.: 968 272 770 Fax: 968 243 635 drm@aenor.es SEDE SOCIAL: Gnova, 6. 28004 MADRID Tel. 914 325 959 Fax 913 192 797. aenorinternacional@aenor.com www.aenorinternacional.com BRASIL: Tel.: +55 11 51024518 aenorbrasil@aenor.com BULGARIA: Tel.: +359 2 980 1605 mnankova@aenor.com CENTROAMRICA: Tel.: +503 2237 7777 aenorcentroamerica@aenor.com CHILE: Tel.: +562 499 92 00 aenorchile@aenor.com ECUADOR: Tel.: +593-2 2445 127 / 2435 135 aenorecuador@aenor.com ITALIA: Tel.: +39 011 518 31 21 aenoritalia@aenor.com www.aenoritalia.com MARRUECOS: Tel.: +212 664 178 807 aenorinternacional@aenor.com MXICO: Tel.: +52 55 52 80 77 55 aenormexico@aenor.com www.aenormexico.com PER: Tel.: +51 1 441 35 76 aenorperu@aenor.com POLONIA: Varsovia: Tel.: +48 22 208 23 30/1/2 Bulgaria: Tel. / Fax: +35 929 801 605 aenorpolska@aenor.com PORTUGAL: Tel.: +351 226 05 17 60 Fax: +351 226 05 17 61 lusaenor@aenor.com www.lusaenor.com REPBLICA DOMINICANA: Tel.: +1 829 619 0680 aenorinternacional@aenor.com
Diseño e Implementación de Un Programa de Mantenimiento Preventivo para Las Cavas de Refrigeración de Productos Efe, Mediante La Implementación de Sap.