Date Storey 3 General Details Strength of Concrete,fcu = 35 N/mm Strength of Steel,fy = 460 N/mm Minimum cover to the Reinf. = 30 mm Dia. Of Reinf for Corbel = 20 mm (Assume dia = 20 mm minimum) Dia. Of the Hori.links = 10 mm (Assume dia = 10 mm minimum) Load Details Vertical Load, V = 213 kN Horizontal load,H = 106.5 kN (if unknown use 50% of the vertical load) Corbel Dimension Details Width of the Corbel (column) = 282.84 mm Point of Vertical Load,av = 150 mm (from the face of the column) Bearing Plate Details Minimum Bearing Stress = 28 N/mm Bearing Plate Width,bp = 150 mm Min. Bearing Plate length,lp = 50.714286 mm (Required) Bearing Plate length,lp = 150 mm (Provided) Length of the corbel,lc = 375 mm Depth of the corbel,h = 500 mm (Generally increase the depth by 150mm) Max. Allowable shear stress @ face of the column = 4.7328638 N/mm Effective depth of corbel,dreq = 159.11633 mm Effective depth provided,dprov = 450 mm Max. Shear Stress in concc,nc = 1.6735021 N/mm Parameters for Z/d n/fcu = 0.0478143 av/d = 0.3333333 Z/d = 0.9 (From attached chart) Z = 405 mm Ft = 185.38889 kN Main Reinforcement, As req = 532.23388 mm No of Re-bars Provided = 2 Dia of Re-bar, = 20 mm Main Reinforcement, As prov = 628 mm Shear Check % of Reinf Provided,p = 0.4934081 Shear Link based on the calculations (if required) Stress in concrete,n = 0.5310125 N/mm Dia of the link = 10 mm Modified Shear Stress,n'c = 3.1860747 N/mm No of legs provided = 2 nos Nominal Shear links have to be provided Area Provided, Ash = 157.143 mm Spacing provided = 100 mm Spacing, Sh (required) = -146.999 mm Provide the above spacing upto 2/3d from top of the corbel (2/3)d = 300 mm Area of legs provided = 471.42857 mm Spacing provided is O.K. Bearing Stress check inside bend Tensile Force in Re-bar @ start = 78.559115 kN C/C = 163 mm of Bend, Fbt Clear cover = 60 mm Ult. anchorage bond stress,fbu = 2.9580399 N/mm Re-bar dia = 20 mm (Based on Table3.26 of BS8110) Anchorage bond length required = 422.5109 mm Tension in Bar @ start of bend = 52.372743 kN Internal radius of bar,r = 100 mm ab = 80 mm Bearing Stress,(Fbt/r) = 39.279557 N/mm (2fcu/(1+(2/ab)) = 46.666667 N/mm Bearing stress is O.K. Anchorage Details are however checked with the standard Tension and Compresion anchorages. 3/25/2013