100%(2)100% menganggap dokumen ini bermanfaat (2 suara)
466 tayangan73 halaman
Coil tubing has also been used as a less costly version of work-over operations. It is used to perform open hole drilling and milling operations. It can also be used to fracture the reservoir.
Evolution Oil Tools offers a complete line of Coiled Tubing Completions products to meet your needs.
For more information, please visit: www.eotools.com
Coil tubing has also been used as a less costly version of work-over operations. It is used to perform open hole drilling and milling operations. It can also be used to fracture the reservoir.
Evolution Oil Tools offers a complete line of Coiled Tubing Completions products to meet your needs.
For more information, please visit: www.eotools.com
Coil tubing has also been used as a less costly version of work-over operations. It is used to perform open hole drilling and milling operations. It can also be used to fracture the reservoir.
Evolution Oil Tools offers a complete line of Coiled Tubing Completions products to meet your needs.
For more information, please visit: www.eotools.com
Company Profile ...................................................................................................................................................................5 Coiled Tubing Applications ......................................................................................................................................6 Coiled Tubing Completions.......................................................................................................................................7 Coiled Tubing Surface Equipment ..................................................................................................................... 10 Coiled Tubing Sub-Surface Equipment ........................................................................................................... 25 Coil Tubing Service Tools ......................................................................................................................................... 46 How To Find Us .............................................................................................................................................................. 71 Index ..................................................................................................................................................................................... 72
Company Profile 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
5
Knowledgeable personnel providing and developing quality products and timely solutions to the Oil & Gas Industry
Evolution Oil Tools is a group of people that were brought together in order to meet your completion and subsurface tool needs. We provide wholesale products to accommodate your completion / service requirements.
A portion of our product offering includes our own proprietary designs, patents and patent agreements to ensure that you are getting the required technology from the source. We can also offer Design & Engineering support to the product solutions provided to you.
Our group combined, offers you over 100 years of experience in the Oil & Gas Industry, with the majority of that experience being in the tool business. We can also offer servicing capabilities for our product lines.
Make Evolution your tool solutions provider for all of your completion and subsurface tool needs and take advantage of our experience.
Coiled Tubing Applications 6
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
In the oil and gas industry, coiled tubing refers to metal piping, normally 1" to 3.25" in diameter, used for interventions in oil and gas wells and sometimes as production tubing in depleted gas wells, however coil tubing can perform almost any operation for oil well operations if used correctly. Coiled Tubing comes spooled on a large reel and is often used to carry out operations similar to wirelining. The main benefits over wireline are the ability to pump chemicals through the coil and the ability to push it into the hole rather than relying on gravity. A coiled tubing operation is normally performed through the drilling derrick on the oil platform, which is used to support the surface equipment, although on platforms with no drilling facilities a self-supporting tower can be used instead. It can also be run using smaller service rigs, and for light operations a mobile self-contained coiled tubing rig can be used.
Coil tubing has also been used as a less costly version of work-over operations. It is used to perform open hole drilling and milling operations. It can also be used to fracture the reservoir.
Evolution Oil Tools offers a complete line of Coiled Tubing Completions products to meet your needs.
Coiled Tubing Completion Systems 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
7
Multi-Zone Completions 8
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Single String Selective Completions
The single string selective completion allows commingling, separate production, isolation, testing or stimulation of individual zones. This example shows a completion using Evolution Oil Tools packers and a sliding sleeve to control the flow from, or into, the zone by opening and closing the sleeve above the packer.
Multi-Zone Completions 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
9
Dual String Selective Completion
This completion design increases the well's functionality by using sliding sleeves to independently produce, stimulate, test or isolate one or more zones, using slick line or other methods to manipulate the sleeves. The example at the right highlights a quad zone completion.
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Flanged Wellhead 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
11
Flanged Wellhead
The Flanged Wellhead system is primarily used where coiled tubing is to be installed on existing wells. By design, the hanger and optional flow tee assembly become part of the original wellhead. The hanger, and slip and seal set can be manufactured for compatibility with various well conditions, including high temperature and high-pressure.
Benefits
Flange design provides safety and reliability. Simple wrap-around split slip and seal assemblies provide repeatable installation reliability. Optional ow tee assembly provides annular access between coiled tubing and wellbore.
Flanged Coiled Tubing Head w/ Wrap Around Slip & Seal (With Optional Integral Studded Side Outlet) 12
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Flanged Coiled Tubing Head provides a safe and reliable system for installing coiled tubing into a live producing oil or gas well. The tubing hanger incorporates a three piece slip and seal design giving the operator positive indication of proper hanger positioning with in the coiled tubing head profile. The slip and seal assembly is positively locked in position with multiple tie down bolts. This robust design can be retrofitted as a permanent component into any existing or new wellhead installation. The tubing head is used in conjunction with standard surface isolation equipment including a tubing Access Work Window. Coiled Tubing is as easily retracted from the well leaving no components behind in the coiled tubing head. When the tubing hanger is removed from the tubing head, a large inner diameter allows the operator to perform subsequent well intervention operations without having to further break down the wellhead tree.
Benefits Coiled tubing sizes from 1 in. (25.4mm) 2.875 in. (73mm). API 6a flange sizes and pressure rating compatible with wellhead design. Material compliant to NACE MR0175 specifications. HNBR standard elastomer material. Other materials available upon request. CT Split Seal Flanged Hanger 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
13
Description The CT Split Seal Flanged Hanger uses the quad BOP of the coiled tubing service unit to seal well pressure and support the string weight, while the slip and seal assembly is being installed on the tubing string. A pressure window is installed above the quad BOP. The slip rams of the quad BOP hold the string weight, while the pipe rams contain well pressure. With the anchor bolt lock-down system, positive sealing is assured regardless of string weight. After the slip and seal set is installed in the hanger body, push force from the injector is applied to the string.
Applications Higher pressure wells, H2S or CO2 wells requiring flanged assemblies
Benefits PSL levels 1 (standard), 2,3,4 (available upon request). Manufactured to API 6A specs. Meets NACE requirements. Pack-off system available for the thermal wellhead applications. Primarily used to hang coiled tubing velocity string to enhance production. Also used for coiled tubing downhole chemical injection strings. Special materials or coatings available for CO2 service. Available with integral side outlet
Studded Coiled Tubing Head (With Optional Integral Studded Side Outlet) 14
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Studded Coiled Tubing Head provides a safe and reliable system for installing coiled tubing into a live producing oil or gas well. The tubing hanger incorporates a single piece seal mandrel design giving the operator positive indication of proper hanger positioning with in the coiled tubing head profile. The seal mandrel is positively locked in position with multiple tie down bolts. This robust design can be retrofitted as a permanent component into any existing or new wellhead installation. The tubing head is used in conjunction with standard surface isolation equipment and requires no specialty equipment to aid in its operation. Coiled Tubing is as easily retracted from the well leaving no components behind in the coiled tubing head. When the tubing hanger is removed from the tubing head, a large inner diameter allows the operator to perform subsequent well intervention operations without having to further break down the wellhead tree.
Benefits Coiled tubing sizes from 1 in (25.4mm) 2.875 in. (73mm). API 6a flange sizes and pressure rating compatible with wellhead design. Material compliant to NACE MR0175 specifications. HNBR standard elastomer material. Other materials available upon request.
High Temperature Slip and Pack-Off Head 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
15
Description The High Temperature Slip and Pack-Off Head gives the operator a permanent, reliable slip and seal for wellhead data line termination.
Benefits Slip and seal are mechanically packed off. Modular design can accept additional pack off components for redundant sealing. Extensive slip design optimization prevents excessive radial tubing stresses for sensitive instrumentation line. Low torque make up. Optional side port for pressure testing and annular access.
Tubing Sizes (in/mm) Working Temperature (C/F) PSI (MPa ) Connec- tion .1875 - 1 (4.7624 - 25.4) -40 - 500 (-40 - 204) 3045. 8 (21) Custom Threads Available
Data Line Pump Down Head 16
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Data Line Pump Down Head is a multi-functioning temporary wellhead component that packs off against data line giving the operator a redundant wellhead isolation system.
Benefits Primary seal can either be mechanically or hydraulically packed o for remote control during pump down operations. Secondary Seal is installed when pumping operation complete. The seal is mechanically energized and forces are locked in. Modular design can accept additional pack o components for redundant sealing. Independent wrap around slips seat into the upper slip receiver. The Energizing Piston also acts as a wear guide to provide additional protection for the primary seals. Test port used to inject lubricant for pump down opera9on. Port also used to pressure test primary and secondary seal as well as monitoring pressure between the seals.
Tubing Sizes (in/mm) Working Temperature (C/F) PSI (MPa ) Connec- tion .1875 - 1 (4.7624 - 25.4) -40 - 500 (-40 - 204) 3045. 8 (21) Custom Threads Available
Thermal Data Line Pump Down Head 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
17
Description The Thermal Data Line Head is a high temperature, live well pump-down system with redundant pack-off and stripping functionality. Design objectives achieved ensures safe operation and provides redundant environmental controls to address operation throughout the life of installation.
Benefits Three Piece Slips interchangeable with Viton Stripper Seal for Backup Stripper as well as HT Grease Injection functions. Grease Injection Technology for Backup Stripper functions. Remote Operation. Graphite Impregnated Teflon Heavy-Duty chevron seals Secondary Backup Seal System
Threaded Hanger 18
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Coiled Tubing Side Entry Heads design allows coiled tubing access to the casing annulus for dewatering or clean-out operations in heavy oil operations. The design allows coiled tubing deployment through the side-entry port, utilizing a coiled tubing unit; thus eliminating the need for a service rig to pull/run the jointed pipe. Multiple side outlets provide the option for data acquisition, telemetry, or monitoring of well conditions, such as temperature and pressure.
Applications Well intervention with coiled tubing for clean-out or dewatering operations in heavy oil situations. Annular access for monitoring, data acquisition and wireline services. Deployment of coiled tubing or chemical injection string.
Benefits Live well servicing while maintaining production. Multiple side-entry ports provide access to the casing annulus for coiled tubing operations, data acquisition or monitoring. Ports can be used for wireline operations. Available in anged or studded designs. Design can be tailored to meet customer-specific applications. Relieve hydrostatic pressure to restore gas production. Reduced well servicing costs.
Surface Splitter Head 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
19
Description The Surface Splitter Head is a surface isolation system that both separates and isolates multiple eccentric and concentric tubing strings for unique coiled tubing completion applications. The Surface Splitter Head is designed to be easily installed and made up to each of the strings quickly and without damaging the strings during stab up.
Benefits Compact design gives the operator maximum clearance with in the coiled tubing drum body. A Fig. 206 hammer union connection aids in make-up alignment and ease of assembly while providing both a metal-metal and an O-ring seal. O-ring on packing element for added safety. Smooth interior profile allows the strings to be safely inserted into the main body without risk of damaging or excessively bending the strings. A side port allows the operator to continuously pump fluids down the main outside coiled tubing string.
Threaded Hanger 20
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Threaded Hanger has set the standard for reliability and economy for coiled tubing completions. This compact hanger used as a strip-thru style with the added feature of a hydraulic pack-off.
Applications Support for heavy-duty coiled tubing equipment running larger tubing sizes.
Benefits Three-piece slip set manufactured of high strength case hardened steel. Robust designed body and cap. Top cap creates lock-down on the slips and enhances compression seal with the packing element on the tubing. Steel alloy retaining ring keeps packing element in place during coiled tubing string retrieval. Packing element bonded to steel carrier rings with double O-ring on packing element for added safety. Interchangeable packing elements and slip sets allow change in tubing size without changing hanger body. Side ports up to 1 NPT
Multi Line Feed Through Head 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
21
Description The Surface Isolation Plug was developed to meet industry demand for a method to isolate wellbore pressure inside the coiled tubing pressure, prior to retrieval from the well. The Hydraulic Setting Tool allows the operator to lubricate in and set the SIP in the tubing at surface, shutting off well bore pressure.
The Surface Isolation Plug Installation Tool is a hydraulically activated tool used to install isolation plugs in live coiled tubing strings. The plug is connected to the end of the piston shaft and run into the well, where it is set at a predetermined point near the top of coiled tubing string.
Applications Isolate coiled tubing ID prior to removal of tubing string
Benefits Plugs can be run in live well conditions. Hydraulically activated for quick and easy retrievable operation. Lightweight and compact design allows easy deployment and retrieval of SIPs. Operated by manual hydraulic pump. Stroke length = 34 Reliable hydraulic set design. Easily connects to setting tool. Designed for eld redress and servicing. Provides pack-off of seemed coiled tubing.
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Annular Hydraulic Well Control Valve was developed to provide annular control in well completions with coiled tubing. The full bore conguration allows large OD tools to be incorporated in the tubing string. When installed initially on new completions, or when re-completing existing wells, the hydraulic annular control valve provides well control and downhole tool options not possible with conventional wellhead valves.
Applications Installation of single or dual-coiled tubing velocity strings, blast joints, packers, etc. Allows repair or alteration of wellhead equipment installed above the control valve. Allows installation of straddle packer assemblies
Benefits Flanged body design manufactured from high strength steel for durability and ease of maintenance. Line pipe side port(s) below the pack-off provide a ow path for production or well kill. Integral union top thread provides installation ease and exibility with coiled tubing equipment.
3000 (21) 2.375 (60.32) EUE Box-Up x Box-Down 2.875 (73.02) EUE Box-Up x Box-Down 3 (76.2) 3 (76.2) LP Box-Up x Box-Down 4 (101.6) 4.5 (114.3) 8rd Box-Up x 4.5 (114.3) 8rd Box-Down or Pin-Down 2 (50.8) LP 2000 (14) 4 (101.6) Fig. 206 Up x 4.5 (114.3) 8rd Box-Down or Pin-Down 5 (127.0) 5.5 (139.7) 8rd Box-Up x 5.5 (139.7) 8rd Box-Down 2 (50.8) LP 2500 (17) 5.5 (139.7) Fig. 400 Up x 5.5 (139.7) 8rd Box-Down
Multi Line Feed Through Head 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
23
Description The Multi-Line Feed Through Head is a high temperature wellhead terminal exit point for multiple data line cluster applications. Each data line is individually packed off and sealed without risk of damaging the data line. The head has been designed for ease of assembly while minimizing leak paths.
Benefits Flexible pack-off system design for feed through of up to six metallic or soft-encased data lines. Pack-off system minimizes compression of the data lines preserving data line integrity. Internal components rotationally locked to prevent lines from being twisted during make-up. Standard seal configurations utilized while leak paths minimized. Upper thread accommodates conduit line housing to prevent damage after installation.
Outer Diameter (in/mm) Max Working Temperature (C/F) PSI (MPa) Connection 3.346 (85) 400 (204) 3045.8 (21) 2 (50.8) NPT Box x Pin
Thermal Grapple Connector 24
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Thermal Grapple Connector is a high temperature connector for coiled tubing. The connector incorporates a versatile design that can be fitted for all sizes of coiled tubing and threaded connection. Sealing is accomplished using a high temperature graphite seal rated for temperatures up to 500C. The sealing and slip components are independent in function allowing the operator to have better control over installation. The connector can be used for well interventions or for life of well sealing integrity.
Benefits Custom thread and material configurations to fit the well application. Hostile environment graphite seal rated to 500oC (930oF). Seal pack-off energy independent of applied connector loads. Little possibility for seal damage during coil stab up procedures. High tensile dual or single-direction slip design.
Coiled Tubing Sub Surface Equipment 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
25
On/Off Tool 26
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The On / Off Tool enables the tubing string to be disconnected above a packer for zonal isolation, tubing retrieval, and temporary zone abandonment. The neck of the tool contains an internal lock profile for landing a wireline plug to provide zonal isolation below the packer. This tool has two main components, the overshot mounted on the tubing string and the stinger mounted on the packer. The overshot disengages with either a standard left release or an optional right quarter-turn release. The washover shoe on the overshot cuts through debris allowing for easy engagement of the stinger. The seals in the tool are retrieved with the overshot to enable redressing at the surface.
Applications Mechanical, hydraulic, or wireline-set packer completions Temporary abandonment of lower zones Zonal isolation above the packer Tubing retrieval without disturbing the packer
Benefits Fits most standard Wireline nipple profiles. Available in most standard tubing and casing sizes
Tool Length (in/mm) OD (in/mm) ID (in/mm) PSI (MPa) 26.5 (673.1) 3.625 (92.075) 1.25 (31.8) 3000 (31)
Retrievable Packer 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
27
Description The Retrievable Packer is a highly reliable tool designed specically for coiled tubing conveyed applications. The compact design features a built-in hydraulic set and lock mechanism. Straight tension applied to the packer shears the inner mandrel at a predetermined value, unsetting the packer. The release mechanism operates independently of the set mechanism resulting in a positive release. This allows low release shear values to be used when string tension is critical. The compact size allows a short lubricator length for ease of deployment in live well operations.
To set the packer, simply apply air, nitrogen or uid pressure to the tubing string until the specied differential pressure at the tool is reached. The packer is equipped with either a shear plug immediately below the packer or on the tail joint end. Shear plugs are preset to apply the specied pressure required to set the packer.
Applications Single or stacked production packer for permanent or temporary installations. Straddle system for zone testing, selective stimulation or water shut-off. Suitable for oil, gas or water wells.
Benefits Large thru-bore minimizes ow restrictions. Quick set, single trip reduces rig time. Suitable for multiple stacked packer applications. Sets with pressurized air, nitrogen, or uid. High tolerance for sandy well conditions. Can be redressed in the eld
Casing Sizes (in/mm) Tool OD (in/mm) Tool ID (in/mm) Temperature Rating (F / C) PSI (MPa) 4.5 (114.3) 3.8 (96.5) 1.375 (34.90) -40 275 (-40 135) 3000 (21) 5.5 (139.7) 4.78 (21.43) 1.75 (44.45)
Latching Seal Mandrel 28
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Latching Seal Mandrel was designed for efciency and economy in the completion of segregated zone wells. The mandrel is made up to the coiled tubing string using a slip- type tubing connector or alternately, a roll-on nipple. A tail joint and any required tools such as pump-out plugs or landing nipples can be installed below the mandrel. The coiled tubing string is run in the hole through the packer prole, and as the mandrel passes through the packer bore, the collet ngers collapse, allowing free passage of the seal mandrel. Once through the packer, the collet ngers prevent the seal mandrel from passing upward, securely locating the Latching Seal Mandrel in place.
When clean-out procedures are nished, the primary string is returned to the hang-off position relocating the mandrel in the packer bore; thus reestablishing segregation. To retrieve the mandrel from the well, simply over-pull to the preset shear value and release the collet-retaining ring. This allows the collet to collapse and the seal mandrel to pass upward through the packer for removal from the well.
Applications Provides access to segregated zones for clean-outs or other operations, without removing primary or secondary tubing strings
Benefits Cost-effective access to segregated zones using existing permanent packer in the well. Accurate tail joint placement at desired depths. Through-bore is same as coiled tubing ID, which maximizes velocity string efciency by eliminating restrictions. Eliminates retrieval of primary and secondary strings prior to well clean-out. Saves time by eliminating extra trips.
Tubing Sizes (in/mm). Tool OD (in/mm) Tool ID (in/mm) Temperature Rating (F / C) PSI (MPa) 0.75 - 2.375 (19.05 -60.32) 2.39 (60.7) 1.35 (34.29) -40 - 275 (-40 - 135) 5000 (34) 3 (76.2) 1.75 (44.45)
Latching Seal Assembly 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
29
Description The Evolution Latching Seal Assembly provides a means to latch and seal a coiled tubing velocity string inside conventional production tubing. The seal assembly features a rugged Lip-Seal Packing Unit and a shear style Latching Collet to anchor and isolate the coiled tubing. The Latching Seal Assembly is deployed into existing production tubing on coiled tubing and latched into a downhole flow control seating nipple. Once latched, the seal assembly and tailpipe may be dropped off and used as a downhole velocity string or tied back to surface as a full- length velocity string. When coiled tubing is extended to surface, hang-off is achieved with a Select threaded or anged hanger.
Applications Isolation of a sliding sleeve or production tubing leak. A velocity string to enhance production. Dual-zone production by utilizing a sliding sleeve. Coiled tubing drop-off to unload liquid below an existing completion.
Benefits Lip-Seal Packing Unit provides a robust seal between the coiled tubing and seating nipple. Coiled tubing is anchored to prevent unlatching of the seal assembly due to pressure differentials. Seal assembly may be customized to latch and seal in a wide variety of well congurations. Coiled tubing may be dropped off and hung below the seal assembly, extended from the seal assembly to surface or both. Seals and metallic components may be customized to suit a wide range of well environments.
Sliding Sleeve 30
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The sliding sleeve is a downhole flow control tool installed on the coiled tubing string. Communication between the annulus and the tubing can be established by shifting a sleeve from a closed to open position using wireline or coiled tubing methods.
Applications Commingling production. Selective control of one or more producing intervals. Run in tandem for selective testing, treatment and production of a multi-zone well. Circulating chemicals for corrosion control. Install a plug and pressure test the coil string.
Benefits
Flow Port area exceeds the Seal Bore area for unrestricted ow through the Sliding Sleeve. The Sliding Sleeve incorporates an equalizing position prior to the fully opened position. Standard conguration is jar up to open and jar down to close using a B shifting tool. The Sliding Sleeve is available in standard or sour service.
Coiled Tubing Sizes (in/mm). Tool OD (in/mm) Tool ID (in/mm) Temperature Rating (F/ C) PSI (MPa ) 1.50 (38.10) 2.2 (55.88) 1.125 (28.575) -40 275 (-40 - 135) 5000 (34) 1.75 (44.45) 2.2 (55.88) 1.25 (31.75)
Burst Disk 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
31
Description The versatile Burst Disc provides for depressurization of vessels, emergency relief of processing equipment and disposal of vapors by vent. The installation of the burst disc can protect typical wellhead hook-ups when flow lines become plugged, or if valves are inadvertently closed. The Burst Disc has no moving parts, making it reliable under even severe operating conditions, and offers a sub- millisecond response time for critical pressure relief. This rugged design is ideal for pressure relief protection and pressure activation in many coiled tubing applications.
Applications
Pressure relief protection
Benefits Rugged design, with no moving parts Outstanding pressure relief protection
Shear-Out Plugs 32
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description Evolution Oil Tools supplies Shear-Out Plugs for all sizes of Landing Nipples. The Shear Plug system is used most commonly to allow setting of hydraulic set packers. It can also be used to maintain a uid column in the coiled tubing string as it is being run in the well. The hydrostatic pressure of the retained uid column supports the coiled tubing against collapse when in a high-differential pressure application. Brass shear screws are added or subtracted to achieve the pump-off pressure differential in relation to column weight and bottom hole pressure of the well being completed.
Applications Used to maintain a uid column in the coiled tubing and prevent tubing collapse in wells with high- pressure differentials. Allows setting of hydraulic set packers. Used on horizontal wells to ensure adequate plug separation.
Benefits Thread-On or Roll-On designs. Adjustable shear settings to accommodate various well conditions. Manufactured from heat-treated steel alloy, for durability and strength
Roll On Drop Dart 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
33
Description Drop Darts are allowed to free-fall down the tubing and latch into Landing Nipples to shut off the diameter of the coiled tubing string during retrieval. The product is available in roll-on or thread-on configurations.
Applications
Shutting in well or to test tubing. Use with pump-off plugs to isolate the tubing ID during coil deployment. Benefits
Available in Thread-On or Roll-On designs. Flexibility to use on initial coil string deployment and tubing isolation for remedial operations. Manufactured from heat-treated steel alloy for durability and strength.
Shear Style Thread-On Landing Nipple 34
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description Evolution Oil Tools supplies Shear-Out Plugs for all sizes of Landing Nipples. The Shear Plug system is used most commonly to allow setting of hydraulic set packers. It can also be used to maintain a uid column in the coiled tubing string as it is being run in the well. The hydrostatic pressure of the retained uid column supports the coiled tubing against collapse when in a high-differential pressure application. Brass shear screws are added or subtracted to achieve the pump-off pressure differential in relation to column weight and bottom hole pressure of the well being completed.
Applications Used to maintain a uid column in the coiled tubing and prevent tubing collapse in wells with high- pressure differentials. Allows setting of hydraulic set packers. Used on horizontal wells to ensure adequate plug separation.
Benefits Thread-On or Roll-On designs. Adjustable shear settings to accommodate various well conditions. Manufactured from heat-treated steel alloy, for durability and strength
Pump-Off Check Valve 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
35
Description The Pump-Off Check Valve is run on the bottom end of the coiled tubing during work-overs or completion operations. The Check Valve provides a one-way ow for clean-out uids such as N2 or CO2 to be pumped down the coil string. When used on completion installations, the valve eliminates an extra coiled tubing clean-out trip by unloading or cleaning to well bottom, prior to hang-off operations. When ow up the tubing is required, a ball is dropped and the coil string is pressured to shear release the Pump-Off Check Valve from the coiled tubing. Applications
Completion or remedial operations requiring a check valve to stop ow up the coiled tubing ID.
Benefits Valve can be sheared from the coil string, allowing ow up the coiled tubing. Large valve body for high ow rates. Eliminates an extra coil run for well clean-out in completion applications. Interchangeable jetting tools, wash shoes or nozzles can be run for clean-outs. Large range of sizes available.
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Pump-Off Tandem Check Valve is typically run on the bottom of the coiled tubing for completion or work-over operations. This Check Valve is designed with a large cross- sectional area above the ball and seat for maximum ow. It can be stacked for applications that require redundant sealing performance.
Applications Completion or remedial operations requiring a check valve to stop ow up the tubing..
Benefits Flange Flow area is greater than the bore size above the ball and seat. Stainless Steel Ball and Seat available to minimize corrosion. Interchangeable jetting tools, wash shoes, or nozzles can be run for clean-outs. A complete range of sizes available..
Low Restriction Check Valve 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
37
Description The Low Restriction Check Valve is typically run on the bottom of the coiled tubing for completion or workover operations. The Check Valve is designed with a large cross- sectional area above the ball and seat for maximum ow. It can be stacked for applications that require redundant sealing performance.
Applications Completion or remedial operations requiring a check valve to stop ow up the tubing.
Benefits Flow area is greater than the bore size above the ball and seat. Stainless Steel Ball and Seat available to minimize corrosion. Interchangeable jetting tools, wash shoes, or nozzles can be run for clean-outs. A complete range of sizes available
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description Primarily used with packer completions, the Coiled Tubing Recorder Carrier securely locates a recorder in the wellbore for long-term pressure and temperature surveys; protecting the recorder from potential damage and eliminating the need to suspend wireline in the well during long-term testing. The recorder lands below a perforated section of the rigid Carrier, eliminating any restriction of the tubing ID. The integral Recorder Landing Sub latches the recorder down, preventing shock loading and vibration when the well is owing. The self-cleaning design ensures easy reconnection to the recorder for retrieval.
Applications Securely locates wireline recorders for pressure and temperature surveys. Benefits Protects the recorder from damage. Eliminates the need to suspend wireline long-term. Latch-down design prevents recorder shock loading and vibration. Self-cleaning design.
Coiled Tubing Sizes (in/mm) Connections Temperature Rating (F/ C) Length (in/mm) 0.75-2.875 (19.05-73.02) Available in threads to suit your needs 1.5 (38.1) 60 (1500)
Pump Off Plug 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
39
Description Tubing end plugs are used for permanent or temporary stops of coiled tubing. Pump off plugs are used as temporary sealing elements at the end of coil tubing. When the desired depth is achieved, the plug is extracted by pressurizing the tubing ID.
Applications
Temporary and permanent sealing of coil tubing.
Centralizer 40
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description This Centralizer designed for coiled tubing, minimizes the tendency of the coiled tubing string, to curve, allowing the smooth passage of wireline tools and other equipment through the diameter of the coiled tubing. When used with a Landing Nipple, the beveled guide on the bottom ensures re-entry of suspended recorder instruments.
Applications Used to allow a smooth transition through the center of a coiled tubing string
Benefits Large inner diameter. Flexible congurations to work with wireline and other equipment. Robust design. Available in a complete range of sizes.
Coiled Tubing Sizes (in/mm) Body OD (in/mm) Tool ID (in/mm) Length (in/mm) 0.75 2.875 (19.05-73.02)
Retrievable Drop Dart 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
41
Description The Retrievable Drop Dart isolates the coiled tubing ID for retrieval or repositioning of coiled tubing that has been hung off in a wellbore. The Dart is used in conjunction with a Landing Nipple for sealing and is run and retrieved with wireline.
Applications Isolate a coiled tubing ID to retrieve or reposition the coil string
Benefits Fishing neck on dart for wireline installation or retrieval Dart provides a positive seal in the Landing Nipple
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Landing Nipple can be used with either a Pump-out Plug or Drop Dart to isolate the wellbore pressure from the ID of a coiled tubing string. On live well deployments, the Pump Off Plug is installed in the bottom of the Landing Nipple and the tubing string is pressured to blow off the plug at a predetermined value. An optional Plug Catcher can be installed with the Nipple to retain the Pump Off Plug after it is released. The Drop Dart is allowed to free-fall down the tubing and latch into the Landing Nipple to shut off the ID of the coiled tubing string during retrieval.
Applications Land drop dart to shut in well or to test tubing. Use with pump-off plugs to isolate the tubing ID during coil deployment. Benefits Thread-On or Roll-On designs. Adjustable shear settings to accommodate various well conditions. Flexibility to use on initial coil string deployment and tubing isolation for remedial operations. Manufactured from heat-treated steel alloy for durability and strength
Plastic/Nylon/Composite External Grapple Connector 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
43
Description The External Grapple Connector provides a means to connect tools to plastic/nylon/composite coiled tubing strings without restricting the inner diameter of the tubing. The connector is specically engineered to grip the outer diameter of the plastic/nylon/composite tubing with a one-piece slip, designed to limit radial forces that could damage or collapse the plastic/nylon/composite coiled tubing.
Applications
Connecting tools to plastic/nylon/composite coiled tubing strings.
Benefits Single piece slip distributes radial forces evenly against OD of plastic/nylon/composite coiled tubing. Pin or box-down options Custom sizes available upon request.
Plastic/Nylon/Composite Internal Connector 44
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Internal Connector for plastic/nylon/composite coiled tubing is a fast and cost-effective means of connecting plastic/nylon/composite coiled tubing strings. The Internal Connector is designed with opposing threads that when inserted into the plastic/nylon/composite tubing and rotated, draw the coiled tubing ends together against the large OD section of the connector.
Applications Connecting two plastic/nylon/composite coiled tubing strings together.
Benefits Large inner diameter to maximize ow through the connector. Short length to prevent damaging the plastic/nylon/composite tubing when passing over the goose neck. Spoolable design. Connector OD equivalent to the plastic/nylon/composite tubing OD. Connector may also be congured as an Internal Connector x Thread Crossover. Available in large range of sizes. Custom sizes available upon request.
Plastic/Nylon/Composite Support Sleeve 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
45
Description The Support Sleeve provides collapse-resistance and ensures long-term reliable pack-off and suspension of plastic/nylon/composite tubing. When plastic/nylon/composite tubing is used as a velocity string, the tubing is run to depth and hung-off in a Select Coiled Tubing Hanger and pack-off assembly. The plastic/nylon/composite coiled tubing is supported by positioning the smooth section of the Support Sleeve adjacent to the packing element in the hanger. The hanger element may now be fully energized without risk of collapsing the tubing.
Applications Used with plastic/nylon/composite tubing in the tubing hanger to prevent collapse and ensure pack- off Benefits Large inner diameter to maximize ow. Prevents the hanger pack-off element from collapsing the plastic/nylon/composite tubing. Fast install for live well hang-off. Available in all sizes of plastic/nylon/composite tubing. Custom sizes available upon request.
Coil Tubing Service Tools 46
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Mechanical Work Window 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
47
Description The Mechanical Style Work Window is installed above the coiled tubing quad BOP or Coiled Tubing Hanger pack-off element and ensures safe coiled tubing hang-off and other coiled tubing operational procedures. After the coiled tubing is landed at the desired depth, the annulus pressure is controlled with the quad BOP or pack-off element on the Coiled Tubing Hanger. Applied hydraulic pressure to the internal hydraulic piston opens the window to expose the coiled tubing. With the window open, equipment can be safely installed onto the coiled tubing. Reversal of the hydraulic pressure will return the window to its closed position.
Applications Allows access to the coiled tubing without disconnecting the coiled tubing unit injector from the wellhead.
Benefits Safe working condition, as injector head remains xed to the wellhead during hang-off operations. Window offers large opening for ease of operations. Can be connected directly to the Coiled Tubing Hanger or above quad BOP. Enables remote operation of window, eliminating the need for close proximity of personal to the wellhead. Can be used in an H2S environment.
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description Carbide Mills are downhole well clean up tools used in conjunction with standard rotary equipment for remedial well intervention applications. Mills specifications are chosen based on the anticipated well obstructions, type of rotary equipment and overall job objectives. The mills are supplied with a variety of carbide sizes and configurations for maximum milling effectiveness and cutting matrix longevity.
Benefits Configurations are concave, flat bottom and convex. Styles included are bladed junk mills, tapered mills, step mills and econo mills Straight or spiral water course grooves. Carbide types include button, crushed or star. Used for removal of cement, scale, cast iron bridge plugs or composite bridge plugs.
Horizontal Well Stimulation Improves Production Using High Pressure Jetting Technology 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
49
Well Stimulation Overview Heavy oil inflow into the wellbore from unconsolidated sandstone reservoirs can be restricted in several ways. The restricting mechanisms can be difficult to identify and effectively treat. Heavy oil wells with long perforated liners also pose the challenge of low bottom hole pressure causing lost circulation during intervention. One of the first means of treating wellbore inflow problems is to apply an effective wellbore clean out program. Evolutions well cleaning technology effectively removes debris from the wellbore while also applying direct hydraulic jetting pressure to the casing wall and slotted perforations or screens.
Job Parameters Five extended reach horizontal heavy oil injection and producing wells. Job design consisted of tubing lock up analysis, pump pressure calculations, tubing sizing, annular flow path pressure drop prediction and tool string design. Slotted Liner: 114mm and 139mm Liner Tie Back String: 114 mm Vertical Depth: 480 mTVD Total Depth: 2300 mMD 2900 mMD BHP: 3,000 kPa 5,000 kPa Workover Fluid: Fresh Water
Results Production increase of 2.5x. 12 days of continuous pumping. Net volume pumped: 10,000m3 of crude oil, water, 50% - 100% intermittent nitrogen cut. Nozzles maintaining original specification and Evolution Roto-Jetting tool not requiring repair. Wells were TDd in a field where getting to bottom has been a rare occurrence. Net volume of sand and asphaltene recovered greater than casing capacity.
Dimple-On Connector 50
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Dimple-On Connector provides a means of connecting the coiled tubing to the bottom hole assembly. The connector is attached to the coiled tubing by dimpling the coiled tubing to the pre-milled dimples of the connector. The connector also provides a means of sealing on the inside of the coiled tubing by the use of three elastomeric O-Rings.
Benefits Available in all coiled tubing sizes. Full inner diameter bore preventing flow restrictions. One piece design. Dimples transmit torque from bottom hole assembly to the coiled tubing. Elastomeric seals. Standard or H2S service.
Downhole Sampler 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
51
Description The Downhole Sampler is a tool that is run to a desired depth in the closed position and applied tubing pressure opens the valve capturing the sample.
Benefits Will not prematurely take sample while RIH. Nitrogen or air is used for applied tubing pressure. Any size sample is achievable. Sample extraction is achieved using a fail-safe positive displacement valve.
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Clean Trip Dump Valve is a multi-activating valve used to establish circulation from the drill string to the annulus. The valve is designed as a normally open valve to allow the drill string to fill while going in the hole. Once on bottom, pump flow actuates the valve and shuts off flow to the annulus and diverts all flow to the mud motor. Shutting down the pumps allows the valve to open reestablishing communication to the annulus allowing the drill string to pull dry.
Benefits Normally open valve design. Multiple actuation valve to cycle between annular and drill string flow. Allows the drill string to fill while running in the hole. Enables the operator to pull drill string dry. Chassis and Spring Material NACE MR0175 Compliant
Product NO. Out Diameter (in/mm) Inner Diameter (in/mm) Standard Connections
Rota Jet Cavitator Tool 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
53
Description The Rota-Jet Cavitator is a versatile, multi-functioning wellbore intervention tool developed for wellbore clean outs, stimulation, abrasive-jetting, cutting and drilling applications.
The tool can be configured for jetting, cavitation, high frequency pulsation and axial vibration to fit the application. The GTS Jet Cavitator s metal-to-metal, pressure balanced dynamic seal and high temperature braking system is designed to excel in deep, hostile well environments for extended run times with all commonly used power-treating fluids including cutting slurries, dry N2, foams, acids, aromatics, polymers and water.
Benefits Pressure Balanced Metal-Metal Dynamic Seal extended run life at any depth with any fluid. Modular Design economically enables fit-for-purpose configurations to achieve maximum results Rotational Speed Control with Pressure Balanced Bearings -- 30 50 rpm over broad span of HHP and high hydrostatic pressures. Cavitation / Pulsation / Axial Vibration Module creates low pressure vapor flare , cyclic pulsation and axial vibration for increased cleaning, deeper formation stimulation and greater reach. Application Specific, Fit for Purpose Rota-Jet Head for cleaning delicate, lined tubulars, blast cleaning of high pressure screens and slotted liners, perforating, slotting, cutting, drilling, clean outs and acoustic jet stimulation.
Outer Dia. In. (mm) Flow Range BPM (Ipm) Max Temp. 0 F ( 0 C) RPM Max. Set Down Lbs (daN) Connection 1.690 (42.93) 0.64 (100) 1.79 (280) 575 (300) 30-50 4,000 (2000) 1.00 (25.4) AMMT 1.750 (44.45) 0.64 (100) 1.79 (280) 575 (300) 30-50 5000 (2500) 1.00 (25.4) AMMT 2.500 (63.5) 2.50 (400) 3.10 (500) 575 (300) 30-50 7000 (3500) 1.5 (38.1) AMMT
Motorhead Assembly 54
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Motorhead Assembly (MHA) is a compact, multi-use coiled tubing service tool used in drilling, milling and other workover operations. The tool features a dual circulation sub, ball actuated disconnect and a dual flapper style back pressure valve assembly.
The dual circulation sub gives the operator two methods to re-establish circulation from the drill string to the annulus; ball actuation or by means of a rupture disc.
The MHA ball disconnect provides a means of disconnecting the work string from the bottomhole assembly in the event the bottomhole assembly becomes stuck. Once the disconnect is actuated, the remaining fish left in the well has an exposed GS profile for ease of reconnection with a subsequent recovery string.
The dual flapper back pressure valve prevents inflow from the well to the tubing. This feature ensures that during an unlikely event of surface pressure containment loss, well fluids are prevented from escaping from the well through the work string.
Benefits Available for all coiled tubing sizes. Full bore prevents flow restrictions. High torque, tension, shock and vibration resistant design. Compact for limited high surface stack ups. Adjustable pressure ratings for rupture discs. Elastomeric seals. Standard or H2S service.
Model GTS Perforating Head 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
55
Description The GTS Perforating Head is a tubing conveyed downhole intervention tool used to sand jet perforate casing or tubing. The head consists of replaceable carbide nozzles that are resistant to erosion from the abrasive effects of high velocity sand. The tool is ran in conjunction with centralizers to minimize back splash from the sand laden fluid as it enters the tubing or casing string. The Perforating Head can be configured with single or multiple nozzles for a variety of perforating applications..
Benefits Specially treated replaceable carbide nozzles for multiple use and minimal wear. Perforator can be deployed on coiled or jointed tubing with standard bottomhole assemblies. Hardened wear surfaces to minimize the erosive effects of back splash. Nozzle OD ranges from 1.69 3.25. Various nozzles sizes available for different pump rates and applications.
Roll-On Connector 56
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Roll-On Connector provides a means of connecting the coiled tubing to the bottom hole assembly. The connector is attached to the coiled tubing by crimping the coiled tubing adjacent to the grooves of the connector. The connector also provides a means of sealing on the inside of the coiled tubing by the use of three elastomeric O-rings.
Benefits Available in all coiled tubing sizes. Full inner diameter bore preventing flow restrictions. Quick make up design. Elastomeric seals. Standard or H2S service.
Slip Type Connector 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
57
Description The Slip Type Connector provides a means of mechanically connecting the coiled tubing to the bottomhole assembly. The connector transmits radial and axial loads to the coiled tubing through a durable one piece slip and dimple sub. The connector also seals on the outer diameter of the coiled tubing isolating tubing from annular pressure.
Benefits Available in all coiled tubing sizes. Rotationally locked for use with high torque rotating equipment. Full inner diameter bore preventing flow restrictions. Reusable one piece slip. Quick make up and easy field rebuild. Standard or H2S service.
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Spoolable Coiled Tubing Connector is a versatile method of connecting two pieces of coiled tubing. The connector is made up to the coiled tubing by either rolling- on or dimpling-on.
Benefits Available in all coiled tubing sizes. One piece design. Large bore for circulation.
Coiled Tubing Reamer 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
59
Description The Coiled Tubing Reamer is designed to remove the seam weld and improve the surface finish of the Coiled Tubing ID. This is beneficial so that an Internal Coil Connector may be sealed through the use of 'O'-rings against the Coiled Tubing ID.
Benefits
Self-aligning "Machines" a high quality finish on the Coiled Tubing ID Simple to adjust to suit different Coiled Tubing ODs and wall thicknesses Sturdy construction Hardened Reaming and Bevel Inserts to ensure a long service life
Coiled Tubing Roll-On Connector 60
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Coiled Tubing Roll-On Connector connects two tubing strings and is designed to prevent breakage when cycling the coiled tubing over the gooseneck on the coiled tubing unit. Installation begins by removing the weld bead and burrs from the end of the coiled tubing then inserting the Roll-On connector through the end. An installation tool is used to crimp the coiled tubing over the connector, and a hardened roller wheel on the installation tool crimps the coiled tubing into the connector grooves.
Applications Connecting two coiled tubing strings together.
Benefits Cost-effective and safe method of joining coiled tubing strings. Connector with thread-down or box-down conguration allows connector to be made up to downhole tools. Large thru-bore. Six O-ring seal design available for custom, high- pressure jobs. Three roll-on grooves per side for high-strength joint. Reusable once removed from the coiled tubing. Easy eld service. Available in a complete range of sizes, configurations and materials.
External Grapple Connector 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
61
Description The External Grapple Connector provides a means to connect tools to coiled tubing strings without restricting the inner diameter of the tubing. The connector is engineered to grip the outer diameter of the tubing without creating excessive radial forces that could damage or collapse the tubing.
Applications Connecting tools to coiled tubing strings.
Benefits One-piece slip distributes radial forces evenly across the OD of coiled tubing. O-ring seal with Teflon back-up. Pin or box-down options.
Coiled Tubing Sizes (in/mm) Connections Temperature Rating (F/ C) PSI (MPa) 1 (25.40) Available in threads to suit your needs -40 275 (-40 135) 2000 (14) 1.25 (31.75) 1.5 (38.10) 1.75 (44.45) 2 (50.80) 2.375 (60.32) 2.675 (67.95) 2.875 (73.02)
Dimple Grapple Connector 62
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Dimple Grapple Connector is used to join two strings of coiled tubing. This connector is designed for use in cases where the spool cannot take all of the coiled tubing required for a hang-off or work-over and additional coiled tubing is needed. The first string is run into the well and secured by the slips of the Annular Control Valve. The tubing is cut above the Annular Control Valve and the second string of coiled tubing is then fed through the injector, and the tubing strings are joined with the connector. Once the connector is installed, the grapple slips are energized by tightening down the grapple cap, which locks securely around the coiled tubing.
Applications Connecting two coiled tubing strings together.
Benefits Slips provide positive grip on the coiled tubing. O-rings provide high-pressure seal. Connector ID is equivalent to the tubing
Non-Rotating Safety Shear Sub 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
63
Description The Non-Rotating Safety Shear Sub was developed for use with stationary downhole equipment that develops rotational torque. The shear sub is installed in the tool string between the coiled tubing and the downhole tool. An example would be an ESP (electric submersible pump), run on small diameter coil, or polyethylene tubing, which upon startup, if allowed to rotate, would cause twisting and subsequent failure of the power cable
Applications Used as a safety sub in ESP installations to prevent twisting of cables.
Benefits Slim diameter maximizes annular ow area. High-strength steel alloy stop-pins provide high anti- rotational torque values. Multiple shear screw locations provide a wide range of shear settings. Minimal differential area reduces pressure-caused stress on shear screws. Undercut shear screw holes prevent cutting of O-ring during assembly. Easily dressed. Standard connections.
Tool OD (in/mm) Tool ID (in/mm) Fish Neck OD (in/mm) Fish Neck Length (in/mm) Connections Shear Values Top (in/mm) Bottom (in/mm) 2 (50.80) 0.625 (15.88) 2 (50.8) 5 (110.25) 1.25 (31.75) (Female) 1.5 (38.10) (Male) 4 screws @ 550 lbs / Screw Max Shear = 2200 lbs
Flapper Check Valve 64
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Flapper Check Valve is connected to the coiled tubing to eliminate ow back of uids or gas through the tubing string. The spring loaded apper valve provides maximum ow area, while providing high performance sealing capability. The Flapper Check Valve is frequently run on drilling motor tool strings for workover and completion operations. The Flapper Check Valve provides safe operation when running coiled tubing into high-volume, high-pressure, or H2S environments. When run above mechanical or hydraulic release tools, the Flapper Check Valve design allows the passage of disconnect balls.
Applications Completion or remedial operations requiring a apper check valve to stop ow up the coiled tubing. As a safety feature on high-pressure, high-volume or H2S environments.
Benefits Can be placed anywhere in the tool string. Safety through the dual apper design. Full bore design allows tools requiring disconnect balls to be run below the check valve. Compatible with jetting tools, wash shoes, nozzles or motor assemblies. A complete range of sizes available. Available in single apper design.
Fishing Tool 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
65
Description Fishing tools are designed to engage with items that were not originally designed to be engaged such as items without an engagement profile. In many cases, the items are lost or broken off pieces of tool strings or coiled tubing. These items have to be engaged either internally or externally. A bar or rod sticking up would call for an overshot tool; a pipe or other large bore could be caught with a spear. Both the overshot and the spear cut into the metal of the fish to engage with it.
Pneumatic Hammer 66
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Pneumatic Hammer delivers downward impact when forces greater than tubing weight is required. This is benecial when retrieving bridge plugs or other tools requiring downward force to release. The hammer can be powered with air, nitrogen or foam. The Pneumatic Hammer uses low volumes and pressures; thus it is well- suited for use with coiled tubing units outfitted with self- contained-compressors.
Applications Equipment in the well that requires a downward force to be released
Benefits Powered by air, nitrogen or foam. Requires low volumes and pressures to operate. Well-suited for coiled units with self-contained compressors. Compact length. Locked connections to prevent thread back-off.
Tool OD (in/mm) Connections (in/mm) Temperature Rating (F/C) PSI (MPa) 1.875 (47.63) 1.66 (42.16) IJ Box Up x Pin-Down -40 -275 (-40 - 135) 400 (3) Max above circulating pressure 3 (79.96) 2.375 (60.32) EUE Box-Up x Pin-Down
Hydraulic Setting Tool 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
67
Description The Hydraulic Setting Tool is a pressure-activated setting tool used to set wireline retrievable plugs, permanent packers, bridge plugs, cement retainers or other types of completion equipment. The setting tool is connected to the end of the coiled tubing and run to depth. Pressuring up the tubing string activates the hydraulic pistons. The force multiplies as the pressure passes through each piston stage, providing the needed force to set the downhole equipment. Once the equipment is set, the ports of the setting tool are open, allowing the well to be pressure tested or circulated and providing pressure equalization of the tubing/annulus prior to retrieval of the coiled tubing string.
Applications A running tool used to set packers and other equipment in the well.
Benefits Multiple stage pistons eliminate high-activation pressures. Can be run with jointed tubing or coiled tubing. Easy eld service.
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description Evolution Oil Tools Retrievable Bridge Plug is a wireline or hydraulic set bridge plug, used to temporarily seal tubulars in any situation where a bridge plug is to be run and retrieved under pressure. The Bridge Plug combines the advantages of wireline accuracy with simple and reliable retrieval. The Retrievable Bridge Plug is commonly used for zonal isolation during well testing, fracturing, acidizing, or wellhead repair.
The Retrievable Bridge Plug utilizes one-piece double-grip slips that hold securely against pressure from above and below the plug. A calibrated setting shear stud assures consistent pack-off performance, as well as retrieval reliability at any depth.
Permanent Drillable Bridge Plug 2013 Evolution Oil Tools Inc. All rights reserved. This document is uncontrolled when printed.
69
Description The Bridge Plug is an economical, fully drillable plug for applications where a 35 MPa (5,000 psi) plug is sufcient. The Bridge Plug is suitable for well abandonments or zone suspensions. It is designed for running and setting with a setting tool, or on regular coiled tubing, using a hydraulic setting tool.
The Bridge Plug features one-piece full-circle type slips that will set securely in up to P-110 grade casing, while still maintaining quick and consistent drill-out times.
The Bridge Plug is rated for continuous service at 35 MPa (5,000 psi) differential pressure at 94C (200F).
This document is uncontrolled when printed. 2013 Evolution Oil Tools Inc. All rights reserved.
Description The Small WR Retrievable Tubing Packer combines the advantages of a wireline set permanent packer with the versatility of a retrievable packer. This reliable packer is suited for most production, testing or stimulation applications. This packer is run in and set hydraulically on jointed or coiled tubing.
Operation To Set The packer is run to depth, and pressure is applied to the setting tool. Pressure is bypassed into the setting chamber of the packer, which applies the correct and proper setting force. Once set, downward force releases the setting tool from the packer. To Retrieve A standard GS Pulling Tool run on coiled tubing or wireline is used to automatically latch into the packer. A straight pull equalizes and releases the packer.
Benefits The packer is not affected by tubing expansion or contraction forces, as packer cannot be accidentally unset. One-piece double acting slips securely hold the packer against pressure differentials. The setting force is applied directly to the elements, ensuring a full and hard pack-off. Packer locking mechanism is located in the protected annular area. Simple and reliable straight pull releasing system.