Anda di halaman 1dari 3

Page 1 Why you are failing TS, Tips what you have to know !

- CCIE R&S - IT Certification Forum


12/07/2013 4:45:47 PM http://certcollection.org/forum/topic/184686-why-you-are-failing-ts-tips-what-you-have-to-know/
IT Certification Forum CERTIFICATION - - - - - NO REQUESTS IN THESE FORUMS - - - - - CISCO SYSTEMS EXPERT CCIE R&S
MPLSv3 for Review in CCIE R&S UldisD
Why you are failing TS, Tips what you have to know! in CCIE R&S mike81
K7 Rip2ospf redist in CCIE R&S ahmadibrahim
[OFFER] Request Actualtests Materials Here in OTHER SHARES rooottt321
MPLSv3 for Review in CCIE R&S chitra1988it
Why you are failing TS, Tips what you have to know !
Started By UldisD, Today, 03:27 PM
TS TS,,
Thanked by 1 Member: s4g
jay5805 Sign Out
UldisD
Hello,
After some observation of threads and reports I concluded that you miss some easy things what shouldn't be done on TS
part.
Sometimes reporters said everything working fine but I fail. Why?
i'll try answer:
1. Avoid to remove config line completely , thing what can be done with change. Only last way is remove away. This
always don't like our vendor.
2. DO NOT shut interfaces, think what can be done without it.
3. Wording of question. Read very careful. Because I saw that first impression is, that youcan not to do anything on
particular place, but in fact YOU CAN. Super answer I saw fromMike81.
Post #19 http://certcollection.org/forum/topic/184639-mplsv3-for-review/page__st__14#entry704043 (http://
certcollection.org/forum/topic/184639-mplsv3-for-review/page__st__14#entry704043) MPSv3 ticket MQC.
4. Better use AD for static routes...youcan get same result as removing it
5. To leave helper commands like logg con - IS NOT a fault - verifiedwith proctor
But main attention - is question WORDING !!!. I got lot of questions - like "does restriction in questions are
correct?" " I cant solve with this restriction" - YES YOU CAN, but deep dive in question. Last MPLSv3 is verified by very
respectful experts. I as creator, + 2 CCIE's fromhere.
All questions are correct. everything is verified.
the best result what I know to solve this TS from first face was 3.5 hours.
it is absolutely normal, because there are much more faults than in life.
To add more tips here are welcome !!
Posted Today, 03:27 PM
Page 2 Why you are failing TS, Tips what you have to know ! - CCIE R&S - IT Certification Forum
12/07/2013 4:45:47 PM http://certcollection.org/forum/topic/184686-why-you-are-failing-ts-tips-what-you-have-to-know/
Back to CCIE R&S Next Unread Topic
IT Certification Forum CERTIFICATION - - - - - NO REQUESTS IN THESE FORUMS - - - - - CISCO SYSTEMS EXPERT CCIE R&S
Organization
About Us
Advertising
Contact Us
Follow us on Twitter
Community
Forums
Blogs
Downloads
Privacy Statement
Downloads
Apple
Cisco
Citrix
CompTIA
Microsoft
Test Providers
Pearson VUE
Prometric
Exin-Exams
Site Info
2008 - 2011 CertCollection IT Certification Forum
Community Forum Software by IP.Board
Go to top
s4g
Yup u r right sir my last attempt is fail bs i cant understand the restrictions of Q. So from that time i concentrate on
WORDS then L2-IGP-Technology. Thanks UD sir
Posted Today, 03:49 PM
student77
@ULDiSD
referring to your point 2 above, you mean shutting down lo4 and lo10 on TS5, is not not considered correct?
Posted Today, 04:07 PM
mike81
student77, on 12 July 2013 - 04:07 PM, said:
@ ULDiSD
referring to your point 2 above, you mean shutting down lo4 and lo10 on TS5, is not not considered correct?
i think what UldisD is refering to if youhave got a ip ospf network point-to-point on the loopback interface then try
removing that first rahter than shutting down the interface.
in TS5 you have to shut the interfaces.... one guy who passed it recently veryfied it with the proctor.
basically shutting anything down and removing config completely should be your last resort of action. if something else
can be done to resolve the fault then do this first
Posted Today, 04:15 PM
moontouch
Thank youUldisD for your very informative suggestion , like always highly appreciated Boss!!!
Posted Today, 04:19 PM
jay5805
Regarding Do SHOT SHUT the interfaces ,
in MPLS TS, on router R27 and R26 , bothhave the same ip add 192.168.20.1,
if do not shut loopback int bearing this ip , R24 shows only this ip sourced fromR27,
then should we manupulate the administrative distance on this route on R27
Posted Today, 04:35 PM

Anda mungkin juga menyukai