0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
76 tayangan32 halaman
SPECIFICATION FOR DUCTILE IRON PIPES SAJH PS / DI / 001 (Rev.1. / 09.2004) NO CHANGES ALLOWED WITHOUT the PERMISSION of QUALITY ASSURANCE DEPARTMENT of SAJ HOLDING SDN. BHD.
SPECIFICATION FOR DUCTILE IRON PIPES SAJH PS / DI / 001 (Rev.1. / 09.2004) NO CHANGES ALLOWED WITHOUT the PERMISSION of QUALITY ASSURANCE DEPARTMENT of SAJ HOLDING SDN. BHD.
SPECIFICATION FOR DUCTILE IRON PIPES SAJH PS / DI / 001 (Rev.1. / 09.2004) NO CHANGES ALLOWED WITHOUT the PERMISSION of QUALITY ASSURANCE DEPARTMENT of SAJ HOLDING SDN. BHD.
SPECIFICATION SAJH PS / DI / 001 (Rev.1.0 / 09.2004)
QUALITY ASSURANCE DEPARTMENT SAJ HOLDING SDN. BHD.
NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJH SPECIFICATIONS FOR DUCTILE IRON PIPES
Contents Page
Contents 2
1.0 General 3
2.0 Pipe 3
3.0 Process of Manufacturing 3
4.0 Lengths and dimensions 4
5.0 Coating and Linings for pipes 4
6.0 Internal Lining of Cement Mortar 5
7.0 Rubber ring / gaskets 5
8.0 Testing and inspection 5
9.0 Packing 6
10.0 Marking of Ductile Iron Pipes 6
11.0 Pre- Delivery Inspection and evaluation 6
12.0 Certification 6
13.0 Schedule of stores 7-32
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 2
QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SPECIFICATION FOR DUCTILE IRON PIPES
1.0 General
a. The specification is applicable to Ductile Iron Pipes for water supply systems and shall conform to BS EN 545:2002.
b. These specifications will provide necessary information on the product dimension and requirements for the supply of pipes only.
2.0 Pipes
a. The pipe shall manufactured with socket and spigot, plain-ends and flanged-ends of Class 40 or Class K9.
b. For all specials/fittings, the product shall be of minimum Class K12.
c. All Ductile Iron Pipes and accessories shall be designed to withstand hydraulic working pressure of PN 16.
d. All flanges shall be of stainless steel complying with PN 16 BS 4504 or equivalent standards.
3.0 Process of Manufacturer
a. Pipes and the accessories of Ductile Iron may subjected to suitable heat treatment in order to give them the required mechanical characteristics or tensile properties as shown in table below.
Centrifugally Cast Pipes Fittings DN 100 to 800 DN 100 to 800 Tensile strength Min. 420 N/mm Min. 420 N/mm Elongation Min. 10% Min. 5% Hardness Max. 230 HB Max. 250 HB
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 3
QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
4.0 Length and Dimensions
4.1 The effective length of all straight pipes shall be 6.0 meters.
4.2 The diameter and shell thickness of standard pipes shall be shown below.
Pipes diameter (mm) Pipe shell thickness (mm)
Nominal Diameter
Outside Diameter
Class 40
Pipes Class (K9)
Specials / Fittings Class (K12)
100 150
200 250 300
350 400 450
500 600 700 800
118 170
222 274 326
378 429 480
532 635 738 842
4.8 5.0
5.4 5.8 6.2
7.0 7.8 -
- - - -
6.0 6.0
6.3 6.8 7.2
7.7 8.1 8.6
9.0 9.9 10.8 11.7
7.2 7.8
8.4 9.0 9.6
10.2 10.8 11.4
12.0 13.2 14.4 15.6
5.0 Coating and lining for pipes
5.1 The external coating of D.I. Pipes and specials/fittings shall comprise a layer of Metallic zinc, covered by a layer of a bitumen coat.
5.2 The mean mass of inc per unit area shall be not less than 130g / m.
5.3 The metallic zinc coating shall cover the external surface of the pipe and provide a dense continuous, uniform layer. It shall be free from such defects as bare patches or lack adhesion. The uniformity of the coating shall be checked by visual inspection.
5.4 Damage to coating where the area of total removal of metallic zinc has a width exceeding 5 mm and areas left uncoated shall be repaired. Repaired shall be carried out either by:
a. metallic zinc spray. b. application of zinc rich paint containing at least 90% zinc by mass of dry film; the mean mass of applied paint shall not less than 150g / m.
5.5 Bitumen coating shall not be less than 70m. It shall uniformly cover the whole surface of metallic zinc layer and be free from such defects as bare patched or lack of adhesion. The uniformity of the finishing layer shall be checked by visual inspection. Unless otherwise specified, the finishing layer of bituminous product shall be coated externally with either one of the following:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 4 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
Coal tar epoxy (epoxy content approximately 12%) Standard coating materials as specified in BS 4147:1980 type I (bitumen based, hot applied) or Standard coating materials as specified in BS 3416:1976 type II (bitumen based, cold applied)
6.0 Internal Lining of Cement Mortar
6.1 All D.I. Pipes and specials/fittings shall be mortar-lined.
6.2 The lining shall be applied by a centrifugal spinning process or a centrifugal spray head or a combination of those methods.
6.3 The cement mortar mix shall comprise cement, sand and water, chloride free admixture may be used if necessary.
6.4 The ratio by mass of sand to cement shall not exceed 3.5.
6.5 The compressive strength of the cement mortar after 28 days of curing shall be not less than 50 Mpa.
6.6 The required thickness of the cement mortar lining and its tolerance shall be given in table below: -
Table 3 Dimensions in mm Thickness DN Nominal Value
Limit deviation Maximum crack width and radial displacement 40 to 300 4 -1.5 0.4 350 to 600 5 -2 0.5 700 to 1200 6 -2.5 0.6 1400 to 2000 9 -3 0.8
The lower limit only is given
7.0 Rubber Ring / Gaskets
7.1 Rubber rings/ gaskets for ductile iron pipes and accessories shall be such size and shape of manufacturers designs as to provide a pressure tight seal for the life expectancy of the pipeline under specified working, transient and test pressure conditions.
7.2 Ruber gasket materials shall be of EPDM complying with the requirements of MS672:1999, AS 1646:1992 or BS EN 681 with of 55 85 IHRD with minimum volume 40% of polymer in rubber compound.
8.0 Testing and Inspection
All ductile iron pipe and accessories shall comply to sampling frequencies and tests in accordance with the standards referred.
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 5 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
9.0 Packing
All ductile iron pipes shall be packed accordingly with proper methods and protected from damage during transit.
10.0 Marking of Ductile Iron Pipes
All ductile iron pipes shall have the following body markings: -
a. The manufacturers name or mark. b. The identification of the year manufacture. c. The identification as ductile iron. d. The nominal size (i.e. DN .). e. The rating of flanges when applicable (i.e. PN ). f. Standard reference BS EN 545:2002. g. The initials SAJH in capital letters. h. Pipe Class
11.0 Pre- Delivery Inspection and Evaluation
a. It is the responsibility of the tenderer to inform SAJH for inspection purposes during manufacturing and before delivery.
b. SAJH reserve the right to inspect and witness the testing of product offered.
c. At any time, when requested, the supplier is to provide SAJH a sample of the product offered for evaluation purposes. All costs shall be borne by the supplier.
d. If at any time the supplier fails to deliver the required sample, the product is deemed fail to meet the specifications.
12.0 Certification
a. Manufacturer of supplier are required to provide a copy of the certificate and testing report form SIRIM, IKRAM or other recognised certification body.
b. Tests report required shall be those tests conducted within a year period.
c. SAJH have the right to refuse offer or reject supply if the document required are not enclosed.
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 6 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SCHEDULE OF STORES
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 7 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (A) Schedule of Stores for Supply and Delivery of Ductile Iron Pipes Spigot & Socket Class 40 To SAJH Specification PS/DI/001 For The Period of Year(s)
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 8 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (A) Schedule of Stores for Supply and Delivery Of Ductile Iron Pipes Spigot & Socket Class K9 To SAJH Specification PS/DI/001 For The Period of ..Year(s)
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 9 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 10 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 11 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 12 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 13 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 14 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 15 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) 5 All Flanged Tee (K12) 1 80mm x 80mm 2 100mm x 80mm 3 100mm x 100mm 4 150mm x 50mm 5 150mm x 80mm 6 150mm x 100mm 7 150mm x 150mm 8 200mm x 50mm 9 200mm x 80mm 10 200mm x 100mm 11 200mm x 150mm 12 200mm x 200mm 13 250mm x 50mm 14 250mm x 80mm 15 250mm x 100mm 16 250mm x 150mm 17 250mm x 200mm 18 250mm x 250mm 19 300mm x 50mm 20 300mm x 80mm 21 300mm x 100mm 22 300mm x 150mm 23 300mm x 200mm 24 300mm x 250mm 25 300mm x 300mm (Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 16 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) ..5 All Flanged Tee (K12). Cont 26 350mm x 50mm 27 350mm x 80mm 28 350mm x 100mm 29 350mm x 150mm 30 350mm x 200mm 31 350mm x 250mm 32 350mm x 300mm 33 350mm x 350mm 34 400mm x 80mm 35 400mm x 100mm 36 400mm x 150mm 37 400mm x 200mm 38 400mm x 250mm 39 400mm x 300mm 40 400mm x 350mm 41 400mm x 400mm 42 450mm x 100mm 43 450mm x 150mm 44 450mm x 200mm 45 450mm x 250mm 46 450mm x 300mm 47 450mm x 350mm 48 450mm x 400mm 49 450mm x 450mm 50 500mm x 100mm (Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 17 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) ..5 All Flanged Tee (K12). Cont 51 500mm x 150mm 52 500mm x 200mm 53 500mm x 250mm 54 500mm x 300mm 55 500mm x 350mm 56 500mm x 400mm 57 500mm x 450mm 58 500mm x 500mm 59 600mm x 100mm 60 600mm x 150mm 61 600mm x 200mm 62 600mm x 250mm 63 600mm x 300mm 64 600mm x 350mm 65 600mm x 400mm 66 600mm x 450mm 67 600mm x 500mm 68 600mm x 600mm 69 700mm x 100mm 70 700mm x 150mm 71 700mm x 200mm 72 700mm x 250mm 73 700mm x 300mm 74 700mm x 350mm 75 700mm x 400mm (Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 18 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) ..5 All Flanged Tee (K12). Cont 76 700mm x 450mm 77 700mm x 500mm 78 700mm x 600mm 79 700mm x 700mm 6 All Socket Tee (K12) 1 80mm x 80mm 2 100mm x 80mm 3 100mm x 100mm 4 150mm x 80mm 5 150mm x 100mm 6 150mm x 150mm 7 200mm x 80mm 8 200mm x 100mm 9 200mm x 150mm 10 200mm x 200mm 11 250mm x 80mm 12 250mm x 100mm 13 250mm x 150mm 14 250mm x 200mm 15 250mm x 250mm 16 300mm x 100mm 17 300mm x 150mm 18 300mm x 200mm 19 300mm x 250mm 20 300mm x 300mm (Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 19 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) ..6 All Socket Tee (K12). Cont 21 300mm x 300mm 22 350mm x 100mm 23 350mm x 150mm 24 350mm x 200mm 350mm x 250mm 26 350mm x 300mm 27 350mm x 350mm 28 400mm x 100mm 29 400mm x 150mm 30 400mm x 200mm 31 400mm x 250mm 32 400mm x 300mm 33 400mm x 350mm 34 400mm x 400mm 35 450mm x 100mm 36 450mm x 150mm 37 450mm x 200mm 38 450mm x 250mm 39 450mm x 300mm 40 450mm x 350mm 41 450mm x 400mm 42 450mm x 450mm 43 500mm x 100mm 44 500mm x 150mm 45 500mm x 200mm 25
(Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 20 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) ..6 All Socket Tee (K12). Cont 46 500mm x 250mm 47 500mm x 300mm 48 500mm x 350mm 49 500mm x 400mm 50 500mm x 450mm 51 500mm x 500mm 52 600mm x 100mm 53 600mm x 150mm 54 600mm x 200mm 55 600mm x 250mm 56 600mm x 300mm 57 600mm x 350mm 58 600mm x 400mm 59 600mm x 450mm 60 600mm x 500mm 61 600mm x 600mm 62 700mm x 100mm 63 700mm x 150mm 64 700mm x 200mm 65 700mm x 250mm 66 700mm x 300mm 67 700mm x 350mm 68 700mm x 400mm 69 700mm x 450mm 70 700mm x 500mm (Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 21 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) ..6 All Socket Tee (K12). Cont 71 700mm x 600mm 72 700mm x 700mm 7 Double Socket Tee With Flanged Branch (K12) 1 80mm x 80mm 2 100mm x 80mm 3 100mm x 100mm 4 150mm x 80mm 5 150mm x 100mm 6 150mm x 150mm 7 200mm x 80mm 8 200mm x 100mm 9 200mm x 150mm 10 200mm x 200mm 11 250mm x 80mm 12 250mm x 100mm 13 250mm x 150mm 14 250mm x 200mm 15 250mm x 250mm 16 300mm x 80mm 17 300mm x 100mm 18 300mm x 150mm 19 300mm x 200mm 20 300mm x 250mm 21 300mm x 300mm 22 350mm x 80mm (Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 22 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) ..7 Double Socket Tee With Flanged Branch (K12). Cont
23 350mm x 100mm 24 350mm x 150mm 25 350mm x 200mm 26 350mm x 250mm 27 350mm x 300mm 28 350mm x 350mm 29 400mm x 80mm 30 400mm x 100mm 31 400mm x 150mm 32 400mm x 200mm 33 400mm x 250mm 34 400mm x 300mm 35 400mm x 350mm 36 400mm x 400mm 37 450mm x 80mm 38 450mm x 100mm 39 450mm x 150mm 40 450mm x 200mm 41 450mm x 250mm 42 450mm x 300mm 43 450mm x 350mm 44 450mm x 400mm 45 450mm x 450mm 46 500mm x 80mm 47 500mm x 100mm (Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 23 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) ..7 Double Socket Tee With Flanged Branch (K12). Cont
48 500mm x 150mm 49 500mm x 200mm 50 500mm x 250mm 51 500mm x 300mm 52 500mm x 350mm 53 500mm x 400mm 54 500mm x 450mm 55 500mm x 500mm 56 600mm x 80mm 57 600mm x 100mm 58 600mm x 150mm 59 600mm x 200mm 60 600mm x 250mm 61 600mm x 300mm 62 600mm x 350mm 63 600mm x 400mm 64 600mm x 450mm 65 600mm x 500mm 66 600mm x 600mm 67 700mm x 100mm 68 700mm x 150mm 69 700mm x 200mm 70 700mm x 250mm 71 700mm x 300mm 72 700mm x 350mm (Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 24 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) ..7 Double Socket Tee With Flanged Branch (K12). Cont
73 700mm x 400mm 74 700mm x 450mm 75 700mm x 500mm 76 700mm x 600mm 77 700mm x 700mm 8 All Flanged Level Invert Tee (K12) 1 100mm x 80mm 2 150mm x 80mm 3 150mm x 100mm 4 200mm x 80mm 5 200mm x 100mm 6 250mm x 80mm 7 250mm x 100mm 8 300mm x 80mm 9 300mm x 100mm 10 300mm x 150mm 11 350mm x 80mm 12 350mm x 100mm 13 350mm x 150mm 14 400mm x 80mm 15 400mm x 100mm 16 400mm x 150mm 17 400mm x 200mm 18 450mm x 80mm 19 450mm x 100mm (Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 25 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) ..8 All Flanged Level Invert Tee (K12). Cont 20 450mm x 150mm 21 450mm x 200mm 22 450mm x 250mm 23 500mm x 80mm 24 500mm x 100mm 25 500mm x 150mm 26 500mm x 200mm 27 600mm x 80mm 28 600mm x 100mm 29 600mm x 150mm 30 600mm x 200mm 31 700mm x 150mm 32 700mm x 200mm 9 Double Socket Level Invert Tee With Flanged Branch (K12)
1 150mm x 80mm 2 150mm x 100mm 3 200mm x 80mm 4 200mm x 100mm 5 200mm x 150mm 6 250mm x 80mm 7 250mm x 100mm 8 250mm x 150mm 9 300mm x 80mm 10 300mm x 100mm 11 300mm x 150mm (Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 26 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) ..9 Double Socket Level Invert Tee With Flanged Branch (K12). Cont
12 350mm x 100mm 13 400mm x 100mm 14 450mm x 100mm 15 500mm x 100mm 16 600mm x 100mm 17 700mm x 100mm 10 1 80mm 2 100mm 3 150mm 4 200mm 5 250mm 6 300mm 7 350mm 8 400mm 9 450mm 10 500mm 11 600mm 12 700mm 11 Double Socket Taper (K12) 1 100mm x 80mm 2 150mm x 80mm 3 150mm x 100mm 4 200mm x 100mm 5 200mm x 150mm (Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 27 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) ..11 Double Socket Taper (K12). Cont 6 250mm x 150mm 7 250mm x 200mm 8 300mm x 100mm 9 300mm x 150mm 10 300mm x 200mm 11 300mm x 250mm 12 350mm x 200mm 13 350mm x 250mm 14 350mm x 300mm 15 400mm x 200mm 16 400mm x 250mm 17 400mm x 300mm 18 400mm x 350mm 19 450mm x 250mm 20 450mm x 300mm 21 450mm x 350mm 22 450mm x 400mm 23 500mm x 250mm 24 500mm x 300mm 25 500mm x 350mm 26 500mm x 400mm 27 500mm x 450mm 28 600mm x 300mm 29 600mm x 350mm 30 600mm x 400mm (Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 28 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) ..11 Double Socket Taper (K12). Cont 31 600mm x 450mm 32 600mm x 500mm 33 700mm x 450mm 34 700mm x 500mm 35 700mm x 600mm 12 Double Flanged Taper (K12) 1 100mm x 80mm 2 150mm x 50mm 3 150mm x 80mm 4 150mm x 100mm 5 200mm x 50mm 6 200mm x 80mm 7 200mm x 100mm 8 200mm x 150mm 9 250mm x 80mm 10 250mm x 100m 11 250mm x 150mm 12 250mm x 200mm 13 300mm x 150mm 14 300mm x 200mm 15 300mm x 250mm 16 350mm x 150mm 17 350mm x 200mm 18 350mm x 250mm 19 350mm x 300mm (Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 29 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
No Description Prov. Qty Rate (RM) Amount (RM) ..12 Double Flanged Taper (K12). Cont 20 400mm x 200mm 21 400mm x 250mm 22 400mm x 300mm 23 400mm x 350mm 24 450mm x 250mm 25 450mm x 300mm 26 450mm x 350mm 27 450mm x 400mm 28 500mm x 250mm 29 500mm x 300mm 30 500mm x 350mm 31 500mm x 400mm 32 500mm x 450mm 33 600mm x 350mm 34 600mm x 400mm 35 600mm x 450mm 36 600mm x 500mm 37 700mm x 450mm 38 700mm x 500mm 39 700mm x 600mm 13 Flanged Socket (K12) 1 80mm 2 100mm 3 150mm 4 200mm (Ringgit:)
Signature of Tenderer:. Signature of witness:
Name: Name:..
In the capacity of:.. Adress:.
Tenderers Seal or chop:..
Date:.. Date:
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 30 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 31 QUALITY ASSURANCE DEPARTMENT SAJ HOLDINGS SDN. BHD.
SAJH PS/DI/001 (Rev.1.0 / 09.2004) NO CHANGES ALLOWED WITHOUT THE PERMISSION OF QUALITY ASSURANCE DEPARTMENT OF SAJ HOLDINGS SDN BHD 32 SAJ Holdings Sdn. Bhd. (B) Supply And Delivery Of Ductile Iron Specials To SAJH Specification PS/DI/001 For The Period Of Year(s) (Thickness of specials for the main barrel shall follow the minimum nominal thickness of Ductile Iron Pipes as in BS 534 : 1990)