FEATURES
(a) Menu driven and function key operation
(b) Complete gear data management with gear code no., Drawing no etc.
(c) Storing and recalling of gear profile/results according to gear code
no., batch no., Customer's code no., date etc.,
(d) Calibration Software for LVDT probes and encoders with slip gauges.
(e) Statistical analysis using SPC/SQC software.
(f) All parameter calculations based on DIN 3960, The quality of the work
pieces is determined according to DIN 3962/JIS Standards.
(g) Special software module as per Volvo Standards, Yamaha
Standards, BHEL requirements, Shaping & Shaving Cutters, DOP etc.
PRIME technologies
(h) Special Program for Shaving & Shaper Cutters 3) K-Chart for Involute: Evaluation of Profile Using
(i) Automatic detection of Quality/Class of Gear as K Chart. Zone of zero error at PCD concept is used
per DIN 3962/JIS Standards. B) HELIX TEST:
(j) Measurement sequence of Gear teeth is user
1) Regression Line: Calculation of regression line
configurable.
(k) No of teeth to be checked is user configurable in within the evaluation range.
Standard data. a) Total alignment error -Fb
(I) Automatic Zeroing of probe during measurement b) Tooth alignment error -fHb
startup. c) Longitudinal form error - ffb
(m) Facility / to change / delete / print Standard data.
d) Bottom End Relief - ERB
(n) Documentation of complete measuring record on
e) Top End Relief - ERT
high resolution multicolour graphics printer.
(o) Colour selection of report on screen/printer is 2) Helix with crowning: Calculation of regression
user configurable. parabola within the evaluation range.
(p) Facility to calculate SAP & EAP a) Total alignment error Fb
(q) SAP/EAP can be entered in terms of Roll length b) Tooth alignment error -fHb c)
Roll Dia/Deg. of Roll. Longitudinal form error - ffb
(r) Automatic calculation of BCD & PCD.
(s) Relief evaluation for both lead & profile. 3) K Chart for Helix: Comparison of error diagram
The various parameter that can be computed. using pre-selected tolerance field.
OTHER PRODUCTS
* Gear Pitch & Concentricity Attachment with Software.
* DOP/DIP Checking gauge. (Digital/Computerised)
* Computerised Gear Roll Tester.
* Computerised Roundness/Cylindricity Tester.
* Computerised Contour Profile Measuring Machine.
PRIME technologies
A/501, Devdeveshwar, R.S.M. Cross Road, Andheri (East), Mumbai - 400 069. Telephone: 2831
3850/28251161 /560530628 Fax: (022) 2684 3973 PUNE : (020) 24282582
E-MAIL: primetec@mtnl.net.in Website: www.PrimeTechlndia.com