Anda di halaman 1dari 3

Electrical - ST3 & ST5 Supatray

Copyright by Tyco International Ltd.


Unistrut Australia Pty Ltd reserves the right to change product designs and specifications without notice.
Features
50mm high side. Rapid on-site
fabrication of accessories.
Recommended joining hardware is:
TU940 Nut and Bolt Pack (40/pkt).
Standard Length: 3m
Standard Finish: Galvabond.
Also available in: Hot dipped
Galvanised, Aluminium, Powder
Coated.
Nominal Standard Widths:
150, 300, 450 and 600mm.
Load carrying capacities of
standard galvabond ST3 Supatray:
140kg/lin. metre over 1.5m span
35kg/lin. metre over 3m span
Note: Fire rated to AS/NZS3013:1995
Appendix B - Classification WS5X - Refer
to your local Service Centre for load ratings
and correct installation procedures.
Features
75mm high side. Rapid on-site
fabrication of accessories.
Recommended joining hardware is:
TU940 Nut and Bolt Pack (40/pkt).
Standard Length: 3m
Standard Finish: Galvabond.
Also available in: Hot dipped
Galvanised, Aluminium, Powder
Coated.
Nominal Standard Widths:
150, 300, 450 and 600mm.
Load carrying capacities of
standard galvabond ST5 Supatray:
300kg/lin. metre over 1.5m span
80kg/lin. metre over 3m span
Note: Fire rated to AS/NZS3013:1995
Appendix B - Classification WS5X - Refer
to your local Service Centre for load ratings
and correct installation procedures.
ST3
ST5
width
50
43
75 68
width
3C8
Electrical - ST3 & ST5 Supatray
Rapid On-Site Fabrication Assemblies
Copyright by Tyco International Ltd.
Unistrut Australia Pty Ltd reserves the right to change product designs and specifications without notice.
Supatray Bend
Supatray Tee
Supatray External Riser
Supatray Internal Riser
Form bendside to suit and cut to
length before fixing to tray with
standard joining hardware.
Cut outside rails right through
(3 full cuts make 90 bend)
Cut side rail to
bottom face in 2
places to suit tray
width (flatten side
down or cut off
with snips)
Fix 2 tee/cross brackets to both trays using joining hardware.
Note: Cross is same procedure repeated on the other side.
Cut side rails through on both
sides.
Join segments using link plates
and joining hardware.
2 segments make 90 riser.
Cut both side rails down
to bottom face.
Bend tray along bottom
face and secure with link
plates & joining hardware.
3 cuts in each rail makes
90 riser.
Cut inside rails at top and
bottom flanges only.
Bendside
Linkplate
3C10
Electrical - ST3 & ST5 Supatray
Accessories
Copyright by Tyco International Ltd.
Unistrut Australia Pty Ltd reserves the right to change product designs and specifications without notice.
Hold Down Clamp
Link Plate
Joining Hardware
Bendside
Tee/Cross Bracket
Galvabond
Part
No Description (mm) Unit
AUG2A315 150mm Supatray ST3 3M
AUG2A330 300mm Supatray ST3 3M
AUG2A345 450mm Supatray ST3 3M
AUG2A360 600mm Supatray ST3 3M
AUG2BS3 Bendside ST3 EA
AUG2BTX T/X Bracket ST3 EA
AUG2HDC Hold Down Bracket ST3 EA
AUG2PFH Splice Plate ST3 EA
AUG2PLK Link Plate ST3 EA
LEE55 Divider Strip ST3 3M
AUG5A315 150mm Supatray ST5 3M
AUG5A330 300mm Supatray ST5 3M
AUG5A345 450mm Supatray ST5 3M
AUG5A360 600mm Supatray ST5 3M
AUG5BS3 Bendside ST5 EA
AUG5BTX T/X Bracket ST5 EA
AUG5HDC Hold Down Bracket ST5 EA
AUG5PFH Splice Plate ST5 EA
AUG5PLK Link Plate ST5 EA
LEM55 Divider Strip ST5 3M
Hot Dipped Galvanised
AUH2A315 150mm Supatray ST3 3M
AUH2A330 300mm Supatray ST3 3M
AUH2A345 450mm Supatray ST3 3M
AUH2A360 600mm Supatray ST3 3M
AUH2BS3 Bendside ST3 EA
AUH2BTX T/X Bracket ST3 EA
AUH2HDC Hold Down Bracket ST3 EA
AUH2PFH Splice Plate ST3 EA
AUH2PLK Link Plate ST3 EA
LEE55H Divider Strip ST3 3M
AUH5A315 150mm Supatray ST5 3
AUH5A330 300mm Supatray ST5 3
AUH5A345 450mm Supatray ST5 3
AUH5A360 600mm Supatray ST5 3
AUH5BS3 Bendside ST5 EA
AUH5BTX T/X Bracket ST5 EA
AUH5HDC Hold Down Bracket ST5 EA
AUH5PFH Splice Plate ST5 EA
AUH5PLK Link Plate ST5 EA
LEM55H Divider Strip ST5 3M
Accessories
Splice Plate
3C9

Anda mungkin juga menyukai