Anda di halaman 1dari 1

Technical Information Sheet SL-USB

Novaris Pty Ltd


72 Browns Road, Kingston, TAS. 7050 ABN: 33 065 427 232
AUSTRALIA TEL: +61 3 6229 7233
Copyright 2003 Novaris Pty Ltd FAX: +61 3 6229 9245
E-mail: sales@novaris.com.au Page 1 of 1

USB Protection



Introduction

The Universal Serial Bus provides a level of
functionality and compatibility with peripherals never
seen before. By enabling a truly plug-and-play
platform, the sophisticated hardware and software
behind USB remains practically invisible to most users.

Like all modern networking equipment, USB
technology relies on high-speed, low-voltage
components, which are easy damaged by induced
disturbances. With the use of hubs and repeaters, a
single USB port can host a large number of peripherals
with significant interconnecting cable lengths. Without
effective overvoltage protection, all connected
equipment is left vunerable to costly damage from
surges.

Drawing on technology developed specifically for
high-speed networks, Novaris has developed a USB
protector which guards aginst overvoltage disturbabces
without degrading normal system operation.

Operation

A specialised chip, containing high-speed transil
diodes, provides protection between each line and a
circuit common point. This common point is earthed
via the cable shield to the chassis of the USB host.

The circuit configuration minimises crosstalk between
lines and virtually eliminates circuit loading due to
component capacitance.



Installation

The USB protector is installed in line with the existing
USB cable. Simply plug the protector into the USB
port of the host or hub, and the equipment into the
protectors integral socket.


Specifications

Description: Plug-in USB protector suitable
for USB1 and USB2.
Lines protected: 4 lines (D+, D-, Vbus and
GND)
Protection modes: Transverse and common mode
Protection stages: High-speed transil diode.
Max operating voltage: 6.5V
Let-through voltage:
5kV 10/700s: <20V
100A 8/20s: <25V
Surge rating (8/20s): 100A per mode
Standards compliance: USB1
USB2
Capacitance:
Line to line: <12pF
Line to frame: <25pF
Connection: USB type A socket to type A
plug.
Dimensions:
Enclosure: 61 x 26 x 26 mm
Lead length: 300mm


Options
Cat No. Description
SL-USB Plug-in USB protector

Anda mungkin juga menyukai