Process Engineer
Mobile : +98-9194833692
Phone : +98-1125252089
email: m_taheritaghavi@yahoo.com
Simulation and process modelling of oil / gas / petrochemical unit operations with HYSYS, with intention of plant
optimization
Operating experience of atmospheric / vacuum crude oil distillation and catalytic conversion process units and
technical support of the operation to improve units performance and reliability
Process design and engineering of oil and gas projects at various levels i.e. conceptual design, design basis
memorandum, front end engineering design and detailed engineering design
Major process equipment sizing calculations for pumps, compressors, heat exchangers, separators, drum,
columns, tanks, pipe hydraulic calculation (two-phase flow), pressure safety valve sizing and flare network
Developing heat and material balance, Process Flow Diagrams (PFD) and Piping & Instrument Diagrams (P&ID)
Supporting in Hazard and Operability Studies (HAZOP) to improve performance in health, safety and
environmental protection
Extensive familiarity with refinery units such as Hydrotreating, Hydrocacking, Naphtha Platforming (CCR),
Hydrogen production, LPG recovery / treating, sour water stripping , lubricating oil units and utilities
Self-dependent consultant engineering Recovery of phosphate from phosphate rock by leaching with a dilute
sulphuric acid and precipitating phosphate value as dicalcium phosphate. Responsible for research of pilot and
scale of semi-industry production, conducting study on feasibility of water saving are accomplished in the process
by the use of sea water instead of fresh water and other such issues raised by Plant Operations based on MOCs
(Management of Change) scope of work.
Involved in FEED activities related to phosphate ore, flow lines including hydraulic calculation of sulphuric acid
and sea water, simulation of mix tank, settler, filter and data sheets preparation.
Page 1
Mohamed Bogara University Teaching of the HYSYS software for refinery, petrochemical, chemical industry
of engineering student like as Pipeline Project and facilities (EDS and detailed engineering design stages).
Performed simulations to predict fluid properties, developed PFD / P&ID, performed process calculations,
equipment sizing, prepared equipment and instrument data sheets, prepared engineering design specification
(EDS) report, reviewed and checked vendor documents and supported Hazard / Operability studies.
I had worked on post research laboratory and design of pilot in Development Energy PAIDAR (PEED) Company.
Dept. of Tehran Technical & professional (Technical chemical industry school) Tehran, Iran
Sep, 1994 Sep, 2001
Teacher
Item taught chemical industries, material and energy balance, physics chemistry, unit operation (distillation, extraction,
leaching), fluid mechanic, heat transfer. (Full time)
Internal Training
On-the- job Training, refinery units including atmospheric / crude oil distillations, LPG recovery, Unifiner / CCR Platformer, Hydrocracker
unit, hydrogen PSA production and lubricating oil unit.
AC ADEMIC QUALIFICATIONS :
Master of Petrochemical Engineering, Faculty of Hydrocarbon and Chemical Mohamed Bougara Boumerdes
University, Boumerdes, Algeria, April 2010, GPA 15.05
Bachelor of Science, Chemical Engineering, Faculty of Engineering - Tehran University, Tehran, Iran, March.
1990, GPA13.10
Page 2 of 3
I have passed my project for master on field the synthesis of carbon nanotubes by pyrolysis catalytic from
Benzene and application like additive of motor oil and super current electric.
Regular training courses in computer sciences such as word, excel, power point, Hysys3.2, matlab5.3,
Characteristic Morale :
Serious, energetic,
An innovator man
Languages:
English
oral: good
written: good
French
Persian
Page 3 of 3