NATURAL CLAY
02
NATURAL CLAY
NATURAL CLAY
03
04
NATURAL CLAY
NATURAL CLAY
05
Economical Advantages
Possibilities of Design
Ecological Advantages
100% recyclable
Materials are recycled during the
production process
Disposal Category is Hardfil
06
NATURAL CLAY
TONALITY Classic Natural and Classic Glazed Surface with Graffiti Protection
Material: High-quality natural clays, fired at over 1,200C, using the Keralis process
Thickness: Standard 26 mm, optional 22 mm / 34 mm
Classic Natural: 7 colour shades, without a coating
Classical Glazed Surface: 17 colour shades on basic fragments,with anti-graffiti protection
Colours: see page 10
Classification of fire resistance: A1 (DIN EN 13501-1)
Application: Suspended ventilated facade for all kinds of building and building heights, as
well as for interior design
For installation instructions, go to page 12
The TONALITY Classic Glazed Surface range includes a lasting graffiti protective coating.
The protection is effective from the date of installation. There is no requirement for
re-coating.
Delivery Range
TONALITY Classic Natural and Classic Glazed Surface
Tile width
Module height
(mm)
Tile height
(mm)
Height tolerance
(mm)
Width tolerance
(mm)
150 x 900
150
158
2.0
1.0
200 x 2,000
200
208
2.0
1.0
250 x 2,000
250
258
2.0
1.0
300 x 2,000
300
308
2.0
1.0
400 x 2,000
400
408
2.0
1.0
Module height
Grooved Finish
Module height
Smooth Finish
Module height
grid height
Grooved Finish
Module height
grid height
Smooth Finish
NATURAL CLAY
07
TONALITY Color
Material: high-quality natural clays, fired at over 1,200C, using the Keralis procedure
Thickness: 22mm
Tonality Classic Special Bright Colours: Colour shades with living streaked appearance
Colours: page 10
Tonality Color: Over 30 colour tones with an even uniform appearance
Colours: page 11
Application: Suspended ventilated faade for all kinds of buildings and building heights,
as well as for interior design.
For installation instructions, go to page 12.
Delivery Range
TONALITY Classic Special Bright Colours & Color
Tile width
Module height
(mm)
Tile height
(mm)
Height tolerance
(mm)
Width tolerance
(mm)
200 x 400
200
208
2.0
1.0
200 x 450*
200
208
2.0
1.0
Module height
Smooth finish
08
NATURAL CLAY
Lamelle 1
Lamelle
Trimmed size (mm) d x b
Lamelle 1:
60 x 450
260
Lamelle 2:
50 x 450
150
Baguette
150
65 x 450
Quadrat 1:
40 x 450
40
Quadrat 2:
50 x 450
50
Quadrat 3:
70 x 450
70
Lamelle 2
NATURAL CLAY
TONALITY Color
09
10
NATURAL CLAY
COLOUR CHART
TONALITY Classic Natural
Toscana
Beige
Pearl-gray
Flint-gray
Umbra-gray
Cream light
Dark-red
Copper-red
Bright-red
Salmon-red
Light-gray
Bright-gray
Middle-gray
Dark-gray
Anthracite
Cream
Sand
Eggshell
White, matt
Blue, matt
White, glossy
Black, glossy
Bright-red, streaked
Bright-blue, streaked
Manganese
Please note that actual colours may vary slightly in appearance from those shown above.
Manganese anthracite
NATURAL CLAY
11
COLOUR CHART
TONALITY Color
FA1 glazed
FA1 glazed
FA1 glazed
FA1 glazed
FA5 glazed
FC 1 glazed
FC 2 glazed
FC 3 glazed
FC 4 glazed
FC 1 glazed
FE 1 glazed
FE 2 glazed
FE 3 glazed
FE 1 glazed
FE 1 glazed
FF 1 glazed
FF 2 glazed
FF 3 glazed
FF 1 glazed
FF 1 glazed
FH 1 glazed
FH 1 glazed
FH 3 glazed
FH 4 glazed
FH 5 glazed
FK 1 glazed
FK 2 glazed
FK 3 glazed
FK 1 glazed
FK 1 glazed
FN 1 glazed
FN 1 glazed
FN 3 glazed
FN 1 glazed
FP 1 glazed
FP 2 glazed
FP 3 glazed
FP 1 glazed
FP 5 glazed
FS 1 glazed
FS 1 glazed
FS 3 glazed
FS 4 glazed
FS 5 glazed
FW1 glazed
FW1 glazed
FW1 glazed
FW1 glazed
FW5 glazed
Please note that actual colours may vary slightly in appearance from those shown above.
12
NATURAL CLAY
NATURAL CLAY
TONALITY T-Line
The TONALITY T-Line system creates the
classic appearance of brickwork. It is suitable
for all kinds of tiles and tile sizes.
T-Line uses the same profiles as the standard
system but has an alternative solution for the
vertical seal between the tiles.
13
14
CLADDING
NATURAL CLAY
4
3
4
3
NATURAL CLAY
15
Mounting Bracket
Cover/Central Plate
Bracket Smooth
Variable Bracket
16
NATURAL CLAY
ROUND WALLS
A. Radius 4.0m
ROUND WALLS
TONALITY - cla
dding tile
Natural surface,
brick red colour
Natural surface,
brick red colour
Length up to 380mm
Length up to 380mm
NOTE. For system C & D contact PBS Distributors for specific design solutions for weathertightness design
PERFORATED PANELS
Use internally for acoustic application or internally and externally for ventilation.
NATURAL CLAY
17
Performance
Durability
Plant Weroth/Rhineland-Palatinat e
Werk II
Werk I
Werk III
Plant Autenried/Bavaria
Plant Wertingen-Roggden/Bavaria
TONALITY is produced in
the most modern plants of
Europe.
18
NATURAL CLAY
Manufacturing
procedure
TONALITY cladding tiles are
manufactured in ultra-modern
production plants, using a vacuum
extrusion method. In the course of
the patented Keralis procedure,
the raw material clay is dried,
processed into the finest powered
clay and completely dyed in finely
graduated ratios of colour mixtures.
The products are subsequently fired
at temperatures of approx 1,200C.
A bonding process will result from
the combination of high quality raw
material and high baking
temperatures.
A smooth impermeable surface is
the result.
The production of TONALITY
cladding tiles are in accordance
with DIN EN ISO 9001 Quality
Management System and DIN EN
ISO 14000 Environmental
Management System.
Characteristics
Disposal
Non-combustible
NATURAL CLAY
REFERENCES
19
31 Arrenway Drive
Albany, Auckland
New Zealand
Tel
Fax
www.pbs.co.nz