2002/03
Shunt 200 A
Battery control system with three measuring ranges for voltage (V) current (A) and battery
capacity (Ah). Connection via shunt. There are 3 different shunts to choose from (100 A,
200 A, 600 A), please order separately.
Battery controler with outlet relais (nc)
DCC 4000 -Memory 12 V
Bestell-Nr.: 6 0001 4901
DCC 4000 -Memory 24 V
Bestell-Nr.: 6 0001 4911
DCC 4000 -Batterie Voll 12 V
Bestell-Nr.: 6 0001 4902
DCC 4000 -Batterie Voll 24 V
Bestell-Nr.: 6 0001 4912
DCC 4000 E
Temperature range
Voltage measurement
Accuracy
Illumination
Relay outlets
Electrical connection
Dimensions
Shunt 100 A
Necessary Shunts
Shunt 100 A/100 mV
Technische Daten
Measuring process
Shunt 600 A
Arrangement as in DCC 4000 but without programming facility and without automatic
storage with failure of the power supply. There are two different shunts (100 A, 200 A) for
selection. Please order separately. (without illustration).
Operation voltage
Current-/ Capacitance range
bootselektrik
DCC 4000
40 D i g i t a l M e a s u r i n g I n s t r u m e n t s
From the same series also there are built-in digital measurement
instruments for 230 V/50 cycles alternating current available. The
2002/03
Digital voltmeter as built-in unit suitable for DCC 4000, fitted at front, for control of
the voltage of service or starter battery. Measuring range 0.1-199.9 V. Built-in
warning for low (10.5 V or 21.0 V) and high voltage (14.4 V or 28.8 V). Illuminated
display.
Digital voltmeter with relay outlet
DCV 2000 -Unterspannung 12 V
DCA 2000
Digital ammeter as built-in unit suitable for DCC 4000, fitted at front, for control of
the current of the service or starter battery. Measuring range 0.1-199.9 A.
Illuminated display.
Shunt must be ordered separately.
bootselektrik
Shunts
Shunt 100 A/100 mV
ACV 2000
Digital voltmeter 230 V/50 cycles. Measurement range 100-400 V AC. Exactitude
0.5% e1% digit (sine) power consumption 4 mA. Operating voltage 8V -30 V.
Measuremnt rectifier for ACV 2000
VRC 220
ACA 2000
FRQ 2000
Suitable fittings for the electronic current monitor BSFW are available with the following
diameters:.
Fitting 16 mm
Fitting 20 mm
Fitting 25 mm
Fitting 32 mm
Fitting 40 mm