Anda di halaman 1dari 20

/

<
\ l

%
HYDROCARBON

PROCESSING INDUSTRY
REFRACTORY

SOLUTIONS

Monolithic Concept
Solutions

PETROCHEM
INDUSTRY

Innovative Refractory Solutions for

calder

the Hydrocarbon Processing Industry

REFRACTORY

SOLUTIONS

Our strategy in the industry

Our worldwide presence and expertise

is to bring the best value-in-use

allow us to propose the most suitable

to our customers by continuous

and cost effective solutions.

improvements of our products.

Calderys has earned an international

Based on this strategy, we have

reputation for skilled engineering,

started for a long time ago, research


& development programs to

quality products, and competent


installers. Our world network

improve not only the performance


of our products, but also facilitate
their placement and drying

contributes new refractory


formulations, efficient new installation
techniques, and new solutions

properties.

to old problems.

As a consequence, we enjoy a more

Calderys refractory products are

than a hundred years successful

manufactured under stringent

activity worldwide, our offer includes


a full range of monolithic refractories
in all applications where both alumina
and silica products are needed.

international quality controls.


They are formulated to increase the
service life and reduce overall costs.
Today, Calderys spans the globe and

We offer a full range of commodity

stands ready to give you the latest

and special materials meant for the

and the best in the refractory world.

maintenance of various equipment.


Additionally to the before mentioned
monolithics, Calderys offers a wide
range of prefabricated shapes for many
applications.

Monolithic concept solutions for Hydrocarbon Processing Industry 2

calder
REFRACTORY

SOLUTIONS

The introduction of the first industrial process units created a need for dependable
refractory products to contain the hot process gases. Calderys responded with
unique monolithic refractory technology that has prevailed for many decades.
Calderys worked together with the Hydrocarbon Processing Industry to become a
world pioneer in the development of high quality plastic and castable monolithics
for the emerging refinery and petrochemical applications. During all those years,
Calderys has sustained a long-lasting working relationship with the Hydrocarbon
Processing Industry. They have grown together as partners in the long-term
advancement of monolithic refractory state-of-the-art.
Today Calderys continues to supplement the Hydrocarbon Processing
Industry with a fully-integrated refractory partnership that supplies
materials, technology, and installation services throughout the world.

Efficiency & quality


Calderys is aware of the present-day

Each unique Calderys product has been

demands for fast and economical

carefully formulated and manufactured

installation without a sacrifice of

with advanced technology and quality

refractory quality. Several types

assurance, controlled by ISO 9001.

of monolithic refractory products

Installation, dry-out and start-up

have been developed to meet these

operations are also critical to a long

criteria:

refractory service life. Detailed product

Plastic mouldables

information, installation procedures

Ramming

and material safety data sheets are

Casting (hand packing, rodding)

supplied by Calderys.

Vibration casting

These critical services are furnished

Self-flow casting

by engineering and service personnel

Gunning

with years of refractory experience.

Pumping

The Hydrocarbon Processing

Spraycasting (shotcreting)

Industry can rely on the expert services

Injection

of the Calderys team who develops

Troweling

a dependable refractory product and


the solutions required to ensure a long
service life with reduced costs.

Monolithic concept solutions for Hydrocarbon Processing Industry

calder

uct Application

REFRACTORY

SOLUTIONS

The Calderys team is constantly

This capability assures maximum

The products are specific refractory

improving their refractory

service performance, reduced

products which will meet all

products to meet the needs of the

maintenance, and economical

specific appropriate HCP standard

Hydrocarbon Processing Industry.

installation.

Engineering specifications.

Calderys has earned an international

The Calderys product applications

The Hydrocarbon Processing

reputation for leading refractory

for the Hydrocarbon Processing

Industry can depend on these

technology, high quality materials,

Industry are shown on the pages

refractory products to meet the

and competent installation teams.

indexed below.

Calderys guideline of "Quality leads


to success".

Index
Crude & Vacuum Distillation Units

Catalytic Reformer Furnaces

13

Ammonia Plants

(platformers)

or Hydrogen Plants

Fired Heaters

Transfer Lines

16

Coke Calciners

17

Carbon black Reactors

18

Technical Data

19

Fluid Catalytic Cracking Units


FCC-Units

13-9

Sulphur recovery Units/


Claus Combustion Chambers

Ethylene Furnaces

10-12

14-15

Monolithic concept solutions for Hydrocarbon Processing Industry 4

Vacuum Disti

calder
REFRACTORY

SOLUTIONS

These units are used for heating up crude oil for the refining

Typical temperatures inside the furnace range from 800C to

process. After heating the oil is transported to the distillation

1000C. The unit can be equipped with floor and/or

column for further processing.

side-wall burners. The main function of the lining is to have

The oil is transported through tubing inside the furnace.

good insulating properties in order to limit energy loss.

Radiant section /arch


C A L D E CAST LW 130 C/G
CALDE CAST LW MIX 124 C/G
C A L D E CAST XL 106 C/G
C A L D E CAST XL 140

Convection section
CALDE CAST LW MIX 124 C/G

Burner blocks
C A L D E CAST F 60 C O

CALDE CAST LW 130 C/G

C A L D E CAST LM 70

CALDE CAST XL 106 C/G

Monolithic concept solutions for Hydrocarbon Processing Industry

ytic Reformer Furn


(platformers)

calder
REFRACTORY

SOLUTIONS

Such a unit is used to obtain better distillation efficiency.


The product is transported through tubes inside the furnace.
Typical temperatures inside the furnace are about 1000C.

Radiant section /arch


Up-takes
Fluegas ducts

CALDE CAST LW 130 C/G


CALDE CAST LW MIX 124 C/G
CALDE CAST XL 106 C/G

CALDE CAST LW MIX 124 C/G

CALDE CAST XL 140

CALDE CAST LW 130 C/G

High Duty Fire Bricks

CALDE CAST XL 106 C/G

Monolithic concept solutions for Hydrocarbon Processing Industry 6

calder
REFRACTORY

SOLUTIONS

A fired heater is generally used to increase the temperature

workshop and erected at the job-site in a very short time

of the product anywhere in the process. These units can be

due to the modular design of such units. Temperatures may

rectangular but also circular shapes are common.

range from fairly low 600C to 1000C.

New fired heaters can be completely prefabricated in the

Radiant section /roof


CALDE CAST LW 130 C/G
CALDE CAST LW MIX 124 C/G
CALDE CAST XL 106 C/G

Fluegas ducts

CALDE CAST XL 140

CALDE CAST LW MIX 124 C/G

rS
Floors

Burner blocks

CALDE CAST LW 130 C/G

CALDE CAST F 6 0 C O

CALDE CAST XL 106 C/G

CALDE CAST LM 70

Monolithic concept solutions for Hydrocarbon Processing Industry

calder

ic Cracking

REFRACTORY

SOLUTIONS

FCC-Units

In the past, heavy oil residues from crude oil distillation were

requires advanced refractory materials. Since the process

only used for low level applications. The search for more

is in contact with the refractory, the demands are severe.

efficient use of oil reserves has lead to the development of

The reaction with the catalyst, the severe erosion from

a process of cracking these residues by means of a catalyst.

the catalyst against the refractory lining and the reducing

The principle is to crack the long chain residue molecules

atmosphere inside someparts of the unit call for dedicated

into smaller molecules which form light high grade products

materials.Calderys has developed these materials to ensure

such as propane, butane, gasoline and high octane petrol.

maximum service performance, reduced maintenance and

The unit performing this process is a FCC unit.

cost-effective installation.

The FCC unit is an advanced piece of equipment that also

Reactor / Regenerator
(wall, head & bottom)
C A L D E CAST LW 134 C/G

Reactor outer riser


wye piece

C A L D E CAST M W 25 C/G

CALDE CAST MF 55 G 4

Reactor/
Regenerator plenum

Reactor / Regeneration
primary- & secondary
cyclones

C A L D E PATCH PT 86 2CP
C A L D E STIX PB 85 C/G

CALDE PATCH PT 8 6 2CP


CALDE STIX PB 85 C/G

Mushroom-distributor
reactor inner riser

Spent catalyst
standpipe

C A L D E PATCH PT 86 2CP

CALDE CAST MF 55 G 4

C A L D E STIX PB 85 C/G

CALDE G U N F 60 G 3

Main stripping &


stripper fluffing
steam ring
combustion air ring
C A L D E PATCH PT 86 2CP
C A L D E STIX PB 85 C/G

Monolithic concept solutions for Hydrocarbon Processing Industry 68

calder

ic Cracking

REFRACTORY

SOLUTIONS

FCC-Units

Cyclones
Specific items in the FCC unit are the cyclones and stand-

consequently require a strong, severe abrasion resistant

pipes. The function of the cyclones is to remove the

material. Calderys can offer the materials to resist this

catalyst from the process gasses. The conditions in this area

environment.

Inlet ducts primary- &


secondary cyclones
C A L D E PATCH PT 86 2CP
C A L D E STIX PB 85 C/G

Anchoring systems

OT.

t r ^ r ^ r

S SiS

Monolithic concept solutions for Hydrocarbon Processing Industry

ur recovery Units
Claus Combustion Chambers

calder
REFRACTORY

SOLUTIONS

Due to the environmental issues the need to reduce sulphur

gas contains carbon dioxide, light hydrocarbons, nitrogen, etc.

in fuels as well as in flue gasses has become necessary.

For each part of the equipment in this process - such as

Most refineries are equipped with a so-called sulphur

burners, main chambers, mixing chambers, incinerator

recovery unit. In this type of installation, the acid gas is

chambers, waste heat boilers reactors and sulphur

burned off in a furnace. Except hydrogen sulphide the flue

condensers, Calderys has a proven monolithic lining concept.

Reactors
Bottom / Heads
C A L D E CAST F 42
C A L D E CAST LW 130 C/G

Main Burners/Main Combustion Chambers

C A L D E PLAST C 90 AB

CALDE CAST M W 138

C A L D E PLAST F 60 AB

CALDE PLAST C 90 AB
CALDE PLAST F 6 0 AB

10

Monolithic concept solutions for Hydrocarbon Processing Industry

calder

ur recovery Units
Claus Combustion Chambers

REFRACTORY

Line Burner / Line Mixing Chamber

Line burners
C A L D E CAST 4 0 TR

Line mixing chambers


Hot section

C A L D E CAST LW 130 C/G

CALDE CAST 40 TR

G G C A L D E PLAST C 90 AB

CALDE PLAST C 9 0 AB

Line mixing Chambers


Cold section
CALDE CAST LW 130 C/G (cast)

Incinerator Chambers
Hot section

Mixing section

C A L D E CAST 4 0 TR

CALDE CAST 40 TR

C A L D E CAST LW 130 C/G

CALDE CAST LW 130 C/G

C A L D E PLAST C 90 AB

CALDE PLAST C 9 0 AB

CALDE CAST 40 TR

11 Monolithic concept solutions for Hydrocarbon Processing Industry

Incineration section

Tail gas inlet

C A L D E CAST F 42

CALDE G U N F 40

SOLUTIONS

calder

ur recovery Units
Claus Combustion Chambers

REFRACTORY

Power Former Reactors

Synthesis Gas Dryers

Vessel bottom / head

Vessel

C A L D E CAST M W 138

C A L D E CAST LW 130 C/G

SOLUTIONS

Tail Gas Incinerators

12

Monolithic concept solutions for Hydrocarbon Processing Industry

calder
REFRACTORY

SOLUTIONS

Ethylene is the most important raw material for the Petro-

products can be produced such as Polyethene, PVC, Ethylene

chemical industry. From this material, many different

Glycol (Anti freeze), Styrene and many others.

Convection section

Roof / Arch

C A L D E CAST LW 130 C/G

CALDE CAST LW 130 C/G

CALDE CAST LW MIX 124 C/G

CALDE CAST XL 140

Peepholes
CALDE CAST LW 130 C/G
CALDE CAST XL 140

Floors
CALDE CAST LW 130 C/G

Radiant section /arch

CALDE CAST XL 106 C/G

C A L D E CAST LW 130 C/G


CALDE CAST LW MIX 124 C/G
C A L D E CAST XL 106 C/G
C A L D E CAST XL 140

Burner blocks

Monolithic concept solutions for Hydrocarbon Processing Industry

13

calder

onia Plants
or Hydrogen Plants

REFRACTORY

SOLUTIONS

Ammonia is an important raw material for producing

process is heating of the feedstock. After heating up the

fertilizer. A similar process is also used to produce Hydrogen

feedstock, it is transported through the transfer lines to the

for the Petro-chemical industry. For example, in an FCC unit,

secondary reformer.

H2 is used to improve the cracking process.

The process gas in this reformer is in direct contact with the

The Ammonia or Hydrogen plants have two main units:

lining. Due to the composition of the process gas, the lining

primary reformer and secondary reformer which are

needs to consist of very high purity material. Both low iron

connected by transfer lines. In primary reformer, the main

and low silica refractory materials are therefore used.

Secondary Reformer
Inlet duct

Wall / cone / head

CALDE CAST 40 TR

CALDE CAST 40 TR

CALDE CAST LW 154 C O

CALDE CAST LW 154 C O

CALDE CAST M W 180 C O

14

Monolithic concept solutions for Hydrocarbon Processing Industry 14

onia Plants
or Hydrogen Plants

calder
REFRACTORY

SOLUTIONS

Primary Reformer

Radiant walls
CALDE CAST LW MIX 124 C/G
C A L D E CAST M W 138

Fluegas ducts

C A L D E CAST XL 106 C/G

Monolithic concept solutions for Hydrocarbon Processing Industry

15

calder
REFRACTORY

16

SOLUTIONS

Monolithic concept solutions for Hydrocarbon Processing Industry 16

calder
REFRACTORY

SOLUTIONS

In a coke calciner, the final residue of the refinery process,

During the process, calcination takes place in stages as

Petroleum-coke, is turned into usable carbon. This carbon is

the green coke moves slowly through the progressively

a key element in the production of anodes for the aluminum

increasing temperature zones from 150C up till 1500C.

industry. In principle, there are two types of coke calciners,

In these type of installations, there is direct contact between

the rotary kiln and rotary hearth type. Described here is the

the product and the refractory lining for which Calderys has

rotary hearth type.

high temperature, abrasion resistant, high thermal shock


resistant and chemical resistant materials specific to each
of the different temperature zones.

Up-take fluegas duct


Rabble roof

C A L D E CAST LW 154 C O

Rabbles

C A L D E PLAST C 90 AB
C A L D E PLAST F 60 AB

C A L D E PATCH PT 86 2CP

Discharge table floor


/side walls

Soaking pit

C A L D E CAST F 60 C O

CALDE CAST F 6 0 G 3

CALDE PLAST C 9 0 AB
CALDE PLAST F 60 AB

CALDE CAST LW 130 C/G

Monolithic concept solutions for Hydrocarbon Processing Industry

17

calder
REFRACTORY

SOLUTIONS

Carbon black is a high grade carbon which is used in the tire

needs to consist of very high purity material. Both low iron

industry and in many other applications. Feedstock is not an

and low silica refractory materials are therefore used.

oil residue but aromatic oil.

O i l is injected in a tubular furnace. High temperature of

The process gas in this reformer is in direct contact with the

up to 2000C and a high velocity of the gasses make this

lining. Due to the composition of the process gas, the lining

process very harsh for the refractory lining.

Reactors
C A L D E CAST M W 180 C O
C A L D E CAST UT 99

NOTES: CALDERYS does not warrant the accuracy, fitness for purpose or update of any information disclosed herein. The recipient shall refer t o instructions and advice
provided under any technical documentation. This d o c u m e n t and the information contained herein are the exclusive property of CALDERYS. Reproduction, alteration,
copy, release, publication or distribution, in whole or in part, is not allowed.
References, trademarks and specifications of the products may change according t o the geographical area t o be supplied. Please check the availability of the products
w i t h the sales area manager.

Monolithic concept solutions for Hydrocarbon Processing Industry 18

calder
REFRACTORY

Product n a m e

Main

Binding

component

system

Max.

Max.

recomm.

grain

t e m p . (C)

size

Material

W a t e r required

Permanent

Permanent

required

for mixing on site

linear change

linear change

CaO

(t/m3)

(litres/100kg)

(%)

(%)

C h e m i c a l Analysis ( % )
Al2O3

SiO2

Fe2O3

SOLUTIONS

CCS

CCS

(N/mm 2 )

(N/mm 2 )

Castable
CALDE CAST 4 0 TR

Tabular
Alumina

Hydraulic

1820

95

0.10

0.10

4.40

2.67

8 t o 10

CALDE CAST F 35

Chamotte

Hydraulic

1320

35

48

3.80

9.10

1.85

14 t o 16

CALDE CAST F 42

Chamotte

Hydraulic

1320

41

38

11

12 t o 14

Hydraulic

1620

59

34

0.70

4.50

2.23

10 t o 10.40

Hydraulic

1580

60

30

0.80

5.70

2.14

10 t o 12

Hydraulic

1650

70

26

0.70

1.90

2.51

6 t o 6.80

Hydraulic

1160

25

39

10.50

17.50

CALDE CAST F 6 0 C O

CALDE CAST F 6 0 G3

CALDE CAST LM 70

CALDE CAST LW 116 C/G

CALDE CAST LW 130 C/G

CALDE CAST LW 134 C/G

CALDE CAST LW 134


C O C/G

CALDE CAST LW 154 C O

CALDE CAST LW M i x
124 C/G

CALDE CAST MF 55 G 4

CALDE CAST M W 1 3 8

CALDE CAST M W 1 8 0 C O

CALDE CAST M W 2 5 C/G

CALDE CAST UT 9 9

CALDE CAST XL 106 C/G

Low Iron
chamotte
Low Iron
chamotte
High A l u m i n a
raw materials
Insulating Chamotte
Vermiculite
Insulating
chamotte
Insulating
chamotte
Chamotte
Perlite
Light w e i g h t
aggregates
Insulating Chamotte
Vermiculite
Low Iron

1.40*

added a t t h e nozzle

(gun)

Hydraulic

Hydraulic

1300

1340

39

39

39

40

5.50

2.80

12

14.5

1.20
(cast)
1.50*

3 0 t o 35 (cast)

added a t t h e nozzle

(gun)
Hydraulic

1340

42

46

8.50

1.25*

added a t t h e nozzle

(gun)
Hydraulic

1540

85

0.20

0.20

14

1.12

50 t o 6 0

Hydraulic

1140

24

42

9.50

15

0.94

45 t o 4 9

Hydraulic

1450

54

38

0.70

4.8

2.13

8 t o 9.2

Hydraulic

1380

45

36

13

1.43

20 t o 24

Hydraulic

1800

96

0.50

0.20

1.58

16 t o 18

Hydraulic

1340

46

36

12

1.32

26 t o 30

Tabular A l u m i n a

Hydraulic

1800

99

0.10

0.10

0.50

3.23

4 t o 4.4

Vermiculite

Hydraulic

1060

22

41

17.5

chamotte
Insulating
chamotte
Bubble
alumina
Insulating
chamotte

0.73*

added a t t h e nozzle

(gun)
CALDE CAST XL 140

CALDE G U N F 4 0

CALDE G U N F 6 0 G3

CALDE GUN M W 148 CO HR

CALDE G U N XL 140 C O

Light w e i g h t

Hydraulic

1400

45

36

0.90

16

0.64

50 t o 56

Hydraulic

1300

39

45

2.40

9.20

2.14*

added a t t h e nozzle

Low Iron c h a m o t t e Hydraulic

1450

60

29

0.70

8.30

2.55

added a t t h e nozzle

Hydraulic

1480

54

35

0.60

2*

added a t t h e nozzle

Hydraulic

1400

43

38

0.70

15

0.98*

added a t t h e nozzle

aggregates

Chamotte

Insulating
chamotte
Light w e i g h t
aggregates

+0.00

+0.00

90

65

(800C)

(1200C)

(800C)

(1200C)

-0.55

-0.55

30

17

(800C)

(1200C)

(800C)

(1200C)

-0.15

-0.15

45

24

(800C)

(1200C)

(800C)

(1200C)

-0.10

-0.10

50

20

(800C)

(1200C)

(800C)

(1200C)

-0.10

-0.20

50

35

(800C)

(1200C)

(800C)

(1200C)

-0.04

-0.09

30

32

(800C)

(1200C)

(800C)

(1200C)

-0.25 (gun)

- 0 . 8 0 (gun)

10 (gun)

7 (gun)

(800C)

(1000C)

(800C)

(1000C)

-0.25 (cast)

-0.75 (cast)

6.50 (cast)

3.50 (cast)

(800C)

(1200C)

(800C)

(1200C)

-0.30 (gun)

-0.85 (gun)

9 (gun)

7 (gun)

(800C)

(1200C)

(800C)

(1200C)

- 0 . 4 0 (gun)

- 1 . 2 0 (gun)

3.50 (gun)

2.50 (gun)

(800C)

(1200C)

(800C)

(1200C)

-0.25

-0.10

(800C)

(1200C)

(800C)

(1200C)

-0.40 (gun)

- 0 . 9 0 (gun)

3 (gun)

2.70 (gun)

(800C)

(1000C)

(800C)

(1000C)

-0.25

-0.45

110

75

(800C)

(1200C)

(800C)

(1200C)

-0.20

-0.50

28

14

(800C)

(1200C)

(800C)

(1200C)

-0.20

-0.20

8.50

(800C)

(1200C)

(800C)

(1200C)

-0.20

-0.50

10

(800C)

(1200C)

(800C)

(1000C)

-0.05

-0.10

35

45

(800C)

(1200C)

(800C)

(1200C)

-0.70 (gun)

- 2 . 1 0 (gun)

1 2 0 (gun)

1 (gun)

(800C)

(1000C)

(800C)

(1000C)

-0.05

-0.70

1.60

(800C)

(1200C)

(800C)

(1200C)

-0.25

-0.70

30

16

(800C)

(1200C)

(800C)

(1200C)

-0.20

-0.70

60

45

(800C)

(1200C)

(800C)

(1200C)

-0.35

-0.50

65

40

(800C)

(1200C)

(800C)

(1200C)

-0.15

-0.70

(800C)

(1200C)

(800C)

(1200C)

Ramming
CALDE PATCH PT 8 6 2CP

CALDE PLAST C 9 0 AB

CALDE PLAST F 6 0 AB

CALDE STIX PB 8 5 C/G

Tabular
Alumina

Corundum

High A l u m i n a
raw materials

Bauxite

Chemical

1650

87

6.50

0.20

3.1

Ceramic

1750

90

0.70

2.95

Ceramic

1650

60

34

1.30

2.45

Hydraulic

1300

84

1 (P2O5)

2.30

7.3 t o 7.9 (binder)

2.85 (cast)

7.6 t o 8 . 4

-0.50

-0.65

100

120

(800C)

(1000C)

(800C)

(1000C)

-1.25

-1.55

44

57

(800C)

(1200C)

(800C)

(1200C)

-1.20

-1.60

33

22

(800C)

(1200C)

(800C)

(1200C)

-0.30 (cast)

-0.65 (cast)

100 (cast)

100 (cast)

(800C)

(1200C)

(800C)

(1200C)

* Rebound included

Monolithic concept solutions for Hydrocarbon Processing Industry

19

AUSTRALIA
Calderys Australia Pty Ltd

FRANCE
Calderys France

NETHERLANDS
Calderys The Netherlands BV

Ph.: +61 (0)2 4 2 7 10 800

Ph.: +33 (0)3 26 80 54 44

Ph.: +31 (0)162 468 541

australia@calderys.com

france@calderys.com

netherlands@calderys.com

Export Department

AUSTRIA
Calderys Austria GmbH

Ph.: +33 (0)1 41 08 11 00


export-paris@calderys.com

Ph.: +43 (0)2236 677 090 0


austria@calderys.com

GERMANY
Calderys Deutschland

BELCIUM
Calderys Belgium S.A.

G m b H & Co. O H G
Ph.: +49 (0)2631 8604 0

Ph.: +32 (0)10 45 44 24

germany@calderys.com

belgium@calderys.com

HUNGARY
Calderys Magyarorszag Kft

BULCARIA
Calderys Austria GmbH

Ph.: +36 (0)1 268 0350

Ph.: +359 (0)2 856 3061

hungary@calderys.com

bulgaria@calderys.com

CHINA
Calderys Jiangsu Co. Ltd
Ph.: +86 (0)512 5699 1728

iTALY
Calderys Italia Srl

CZECH REPuBLIC
Calderys Czech s.r.o.

Ph.: +39 0 5 3 691 29 11

Ph.: +420 (0)596 620 544


czech-republic@calderys.com

Ph.: +45 (0)36 77 28 11


denmark@calderys.com

FINLAND
Calderys Finland OY
Ph.: +358 (0)9 854 5060
finland@calderys.com

Ph.: +91 (0)712 252 8506


india@calderys.com

china@calderys.com

DENMARK
Calderys Danmark A/S

iNDiA
Calderys India

italy@calderys.com

POLAND
Calderys Austria GmbH
Ph.: +48 (0)32 330 34 70
poland@calderys.com

RUSSiA
Calderys O O O
Ph.: + 7 (8) 812 640 76 66
russia@calderys.com

SAUDi ARABiA
Calderys branch office
Ph.: +966 (0)3 882 7714
saudi-arabia@calderys.com

SOUTH AFRiCA
Calderys South Africa Pty Ltd
Ph.: +27 (0)16 440 6400
south-africa@calderys.com

SpAiN
Calderys Iberica Refractarios
S.A.
Ph.: +34 (0)985 32 4 3 58

JAPAN
Calderys Japan Co. Ltd
Ph.: +81 (0)78 272 5770
japan@calderys.com

KOREA
Calderys Korea Co. Ltd
Ph.: +82 (0)2 420 5142 ~ 4
korea@calderys.com

MEXiCO
Calderys Mexico SA de CV

iberica@calderys.com

SWEDEN
Calderys Nordic AB
Ph.: +46 (0)31 54 09 00
sweden@calderys.com

TAiwAN
Calderys Taiwan Co. Ltd
Ph.: +886 (0)8 796 55 62
taiwan@calderys.com

Ph.: +52 (0)811 594 3002


mexico@calderys.com

www.calderys.com

Performance you can trust

TURKEY
Calderys Refrakter San. ve
Tic. A.S
Ph.: +90 (0)312 438 8845
turkey@calderys.com

U.A.E.
Calderys France
Ph.: +971 4 8810 992
france-me@calderys.com

UNiTED KiNGDOM
Calderys UK Ltd
Ph.: +44 (0)113 26 36 268
uk@calderys.com

UKRAiNE
Calderys Ukraine LLC
Ph.: +38 (0)62 387 10 01
ukraine@calderys.com

VENEZUELA
Calderys Refractarios
Venezolanos S.A.
Ph.: +58 (0)286 994 1211
venezuela@calderys.com

ViETNAM
Calderys Taiwan Co. Ltd
Ph.: +84 (0)4 6 251 0806
vietnam@calderys.com

Anda mungkin juga menyukai