11.1
GENERAL.
For telephone system the contractor is required to provide and install telephone conduit,
cables, wiring, outlet boxes, rosettes, and telephone distribution boxes. The telephone
exchange equipment and apparatus will also be supplied and installed by the Contractor.
11.2
11.3
TELEPHONE CABLES.
The telephone cables shall have pre-insulated copper wire conductors of 0.6mm dia. and
PVC sheathed overall. Additional wire of 0.4mm dia. for cables of 1-10 pairs shall be
provided. The cable shall be of 250 V grade with insulation resistance of 100 meg-ohms/km.
The indoor cables shall be Siemens type JY (ST) Y and underground cables shall be Siemens
type A2Y (L) 2Y. Equivalent makes shall be acceptable subject to the prior approval of the
Engineer.
11.4
TELEPHONE ROSETTES.
Telephone rosettes for jack type plugs shall have two 5 Amps copper terminals. These shall
be flush mounting type, having plastic or bakelite body. A sample of the telephone rosette
shall be submitted to the Engineer approval.
11.5
11.6
TELEPHONE EXCHANGE.
Electronic Private Automatic Branch Exchange (EPABX), micro-processor controls with
stored programmed in digital transmission using pulse code modulation with time division
multi plex switching with DTMF dialing as well as rotary dialing:
-
The EPABX shall have the following features, however PABX with more facilities shall be
preferred.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
11.7
Special Trunks.
STD Blocking.
Abbreviated Dialing.
Night Services.
Executive Trunk Access.
Break-in.
Call - outgoing.
Call Logging.
Display Panel.
Follow me.
Group venting.
Traffic Classes.
Delayed Hot lines.
INSTALLATION INSTRUCTIONS.
All the purpose of measurement, the following basis shall be adopted:I)
Actual
numbers
of
Telephone
distribution boards, telephone rosettes
and Telephone sets installed.