On occasion, a company will create a protocol that, while not an official standard,
becomes so popular that other companies start using it.
True
False
Question 2
Question 3
Question 4
Question 5
The starting and ending sequences of the synchronous connection are called flags.
True
False
Question 6
Question 7
Examples of real-time applications usually include streaming voice, video, and music.
True
False
Question 8
Question 9
An interface standard can consist of four parts, or components, all of which reside at the
____ layer.
a. transport
b. network
c. data
link
d. physical
Question 10
A ____ connection is one in which both sender and receiver may transmit at the same
time.
a. full-duplex
b. single-duplex
c. half-duplex
d. multi-duplex
Question 11
Some systems, for various reasons, allow only one side or the other to transmit at one
time. This type of connection is an example of a ____ connection.
a. full-duplex
b. half-duplex
c. multi-duplex
d. single-duplex
Question 12
To prepare a data character for transmission, a ____ bit is added to the beginning of the
character and informs the receiver that an incoming data frame is arriving.
a. parity
b. start
c. end
d. stop
Question 13
At the end of the data character, one or two ____ bits are added to signal the end of the
frame.
a. parity
b. stop
c. check
d. start
1 points
Question 14
Question 15
Question 16
With ____ connections, polling is not necessary because there is only one terminal per
line.
a. primary-to-point
b. multipoint
c. point-to-point
d. terminal-to-point
Question 17
Question 18
Question 19
Question 20
A(n) ____________________ bit performs an error check on only the data bits.
parity
Question 21
Question 22
Path: p
Words:0
Question 23
Path: p
Words:0
Question 24
What are the three ways used to maintain synchronization in synchronous connections?
Press Tab to enter the content editor. For the toolbar, press ALT+F10 (PC) or ALT+FN+F10 (Mac).
Path: p
Words:0