1. In Oxyacetylene gas welding, temperature at the inner core of the flame is around
(a)
3500C
(b) 3200C
(c)
2900C
(d)
2550C
2. By which one of the following methods gray cast iron is usually welded?
(a) TIG welding
4. Which one of the following welding processes uses non- consumable electrodes?
(a) TIG welding
5. In MIG welding, the metal is transferred into the form of which one of the following?
(a) A fine spray of metal
(d) Molecules
6. The ratio between Oxygen and Acetylene gases for neutral flame in gas welding is
(a) 2 : 1
(b) 1 : 2
(c) 1 : 1
(d) 4 : 1
(b) Aluminium
(c) Copper
(d) Brass
9. Seam welding is a
(a) Continuous spot welding process
10. In arc welding, the electric arc is produced between the work and the electrode by
(a) Voltage
(d) Borax
12. In electric resistance welding, pressure is applied just after the completion of current.
(a) True
(b) false
(b) 6 to 10 volt
(c) 11 to 20 volt
14. In arc welding, the temperature of heat produced by the electric arc is of the order of
(a)
(c)
(b)
(d)
17. Which of the following welding method uses a pool of molten metal?
(a) Carbon arc welding
18. The electrode tip diameter (d) in spot welding should be equal to
(a)
(b) 1.5
Where
(c) 3
(d) 6
19. Two 1 mm thick steel sheets are to be spot welded at a current of 5000 A. Assuming effective
resistance to be 200 micro-ohms and current flow time of 0.2 second, heat generated during the
process will be
(a) 0.2 Joule
(b) 1 Joule
(c) 5 Joule
20. when the weld is made from left to right, it is known as back hand welding.
(a) Agree
(b) disagree
ANSWERS
1. (b)
11. (d)
2. (c)
12. (a)
3. (b)
13. (b)
4. (a)
14. (d)
5. (a)
15. (c)
6. (c)
16. (c)
7. (d)
17. (b)
8. (c)
18. (a)
9. (a)
19. (d)
10. (c)
20. (a)