Anda di halaman 1dari 2

Protection device against unintended car movement

(EN81-1/2:1998+A3:2009)

COMPLETE SOLUTION
COMPLETE, HARMONIZED, COMPREHENSIVE
WWW.SLC-LIFTCO.COM

FEATURES

Version 02 I Subject to technical modifications.

Complete solution is planned as modular system, components are


harmonized:
- Individual certificates for detection, tripping and braking
- Several diameter of rope pulley available (200, 250, 300 mm)
- Various safety gears for total mass (P+Q) up to 12,040 kg
Brake acts directly on the car, system even detects traction loss
Assembly in any lift controller possible
In additon a signal is given to incremental shaft copying
On demand installation in existing safety circuit is tested and documented
with an equivalent circuit diagram
By integrating error signal in safety circuit of the lift, requirements of
EN81-1/2 A3 are completely met. Further adaptions of hardware or software of the lift controller are not necessary

EN81-1/2 A3: Complete solution

COMPLETE SYSTEM
Concentrated Know-how
to meet the requirements of EN81-1:1998 + A3:2009
DETECTION

Electronic monitoring unit


The electronic monitoring unit SA3-A is delivered in a separate box and
guarantees the safety level SIL3, protection class IP64
Unacceptable high acceleration is identified by the unit already before the
overspeed governor is activated by overspeed
The reaction time of the monitoring unit is 110 ms (incl. reaction time of
magnetic coil of overspeed governors creeping protection)

Protection device against unintended car movement

EN81-1/2:1998 + A3:2009
COMPLETE SOLUTION
TRIPPING

Overspeed governor
Speed up to 3.70 m/s (standard)

BRAKING

Safety gear
The safety gears are certificated as bi-directional acting progressive
safety gear as part of the protection device against unintended car
movments (in addition to the safety function according to Lift Directives
95/16/EG)
All SLC safety gears of series SG2D and BF2D are tested successfully
according to A3 and can also be used in other A3-systems, independend
of dection and tripping
Max. rated speed = 2.80 m/s
Max. total mass = 12,040 kg

Type SG2D-1

Type BF

SCOPE OF DELIVERY
Basic package:
Overspeed governor with creeping protection and incremental encoder DMS
Tension weight for fixing on the guide rail, composed of:
tension weight with guide frame, tension pulley, slack rope switch with locking and
protection cover (tension force about 530 N)
Electronic monitoring unit
Safety gear type SG2D-1, with tripping device, roller switch, safety gear shaft and
neutral position
Options:
Remote initiation
Cable connection from monitoring unit to controller as well as from monitoring unit
to overspeed governor (dependent of length)
Operating device for external operation
Emergency power supply
Other safety gears, dependent upon load and product
Miscellaneous accessories
Modification of circuit diagram

WE CATCH YOU
SLC Sautter Lift Components GmbH & Co. KG I Borsigstrasse 26 I 70469 Stuttgart I Germany I T: +49 711.86062-0 I F: +49 711.86062-501 I info@slc-liftco.com I www.slc-liftco.com

Anda mungkin juga menyukai