Information
Fans
Fans &
& Blowers
Blowers
CONTENTS
G-1
AC/DC Axial AC/DC Axial
Fans & Blowers Catalog Information Fans & Blowers Features of Japan Servo Co. Fans & Blowers
High customer satisfaction achieved thanks to our quiet and energy efficient
Fans & Blowers
The descriptions of the AC and DC fans and blowers appear on the product pages as shown below. Focusing on product development for computer related equipment, the ● Only highly reliable products are delivered to customers
compact axial fans from Japan Servo are the result of technological
Contact Japan Servo if clarification or further information is desired.
innovations that minimize noise to the greatest possible extent. With product liability in mind, it is the logical responsibility of manufacturers
Japan Servo's product designs incorporate several industry firsts, to supply highly reliable products that can be used by customers without any
including specially molded 3-dimensional blades, and silent fans with a product safety worries. Products with new designs are only supplied to the
unique intake shape. Market requirements are always researched and market after their viability has been verified by subjecting them to various
catered to in advance; meaning customers always receive products that high-temperature life tests and proving that they are problem-free.
perform well ahead of market rivals. Moreover, only high-reliability parts are used in the drive circuits of DC fans
Lineup of standard products and basic characteristics.
and blowers. Japan Servo develops and designs products by specifying the
● Versatile lineups of axial fans and centrifugal blowers strictest derating level in the industry.
Fan/blower noise in free air state. (Static pressure 0 Pa)
(This value is sometimes considerably higher when the fan Fans for high static pressure applications are also
supplied as standard products. ● Customized and semi-customized product specifications
or blower is installed in your equipment. See pages G-8 to G-10)
Silent
Operable voltage range. The aerodynamic characteristics required for fan motors differ depending Products are supplied in optimum customized form for bulk purchases.
(PQ characteristics vary on the equipment in which they are installed, but may roughly be grouped Japan Servo is capable of swiftly accomplishing optimum designs by fully
into airflow focus and pressure focus types respectively. The axial fans and exploiting CFD technology. Japan Servo will propose optimum semi-
depending on the operating
centrifugal blowers (also called “centrifugal fans” and “sirocco fans”), as fan customized fans and blowers by combining its large variety of customized
voltage. See page G-7)
motors of Japan Servo, fall into both the former and latter categories. parts. Let Japan Servo devise a suitable solution to meet your requirements.
Recently, Japan Servo has also developed pressure focus type axial fans,
Product photo, maximum Startup current value. suitable for use in high static pressure regions, in response to diverse ● All Japan Servo catalog products conform to the
performance, weight. customer requirements.
DC fans
DC fans
(Use to select the power source) EU RoHS Directive
Axial
Axial
As its name implies, an axial fan generates airflow in the motor axial
direction. Airflow can be generated cylindrically by the propeller from the All Japan Servo products conform to the EU RoHS Directive by restricting
Current value in free air state.
(The current at the operating
entire diameter of the fan, allowing considerable airflow generation. The the contents of six specified hazardous substances (lead, mercury,
point will be an increment of axial fan sucks in air and pushes it out through the propeller blades, without cadmium, hexavalent chromium, PBD and PBDE) to below tolerable values.
List of model codes. 20 % or less of the rating with large pressure (static pressure) output. (All products produced from the beginning of January 2006 meet the RoHS
(Product codes for which fans and will be below the The centrifugal blower, on the other hand, recovers the airflow released by Directive. Certain standard inventory products may include those produced
orders are accepted) rating with blowers. See page the impeller blades in a centrifugal direction from the motor shaft center via in and before December 2005. Please specify in your purchase orders that
Centrifugal
Centrifugal
G-13) the scroll casing (also called a “housing” or “frame”) and discharges it only RoHS-compliant products should be shipped.)
Materials used, carton unidirectionally. This system effectively converts a centrifugal force into Japan Servo is also active in reducing another 18 hazardous substances.
specification. Important notes regarding the basic pressure, increasing the pressure (static pressure) to blow the air. However,
characteristics. only a limited airflow passes through the impeller, preventing a large airflow
PQ characteristics chart.
List of products which do not meet the from being obtained.
● AC and DC fans
(Drawing an estimated
ventilating resistance curve standard life. Japan Servo refers to the former as fans and the latter as blowers,
to easily distinguish the differences between the two types. One of the prominent advantages of AC fans is the fact that they can be
will determine the airflow at
Flange shape. In addition to these two types, Japan Servo has recently released axial directly connected to an AC power supply. The DC fan boasts high motor
the operating point)
(Select ribbed specification fans with features resembling those of the blower (high static pressure efficiency and is power-saving, as well as generating less heat, allowing the
when screws are used) region fans, e.g. the G1751M series). These fans are attracting the attention weight of the motor and venturi case to be reduced.
Silent
Silent
of the IT industry and are highly rated as quiet products, capable of saving AC fans and blowers use AC induction motors and are suitable for
energy with high-impedance equipment, with which conventional axial fans constant speed operation. DC fans and blowers, meanwhile, use DC
Wiring connection to the External dimensions, lead wire
specifications. have not been efficient. brushless motors and can have highly variable airflow. By varying the
power source. (See page
voltage supply, the speed is also easily adjustable. Standard DC fans and
G-15 for the wiring
connection to the sensors)
blowers regulated by variable-speed control are also available. See pages
● Our ceaseless quest to reduce noise G-40,G-41, and G-58 for further details.
Mounting hole dimensions
as examples for fan mounting.
List of fans and blowers Japan Servo continues to introduce a never ending series of quiet [Principal applications]
(Recommended shapes to
AC fans
AC fans
products to the market. People know to talk to Japan Servo if low noise is a
Axial
Axial
with sensors. maximize fan performance ● Computers and peripheral terminal equipment ● Servers
characteristics) priority, and that reputation has grown over many years. Day and night, ● Personal computers ● Copiers ● Audio equipment
Japan Servo is active in the research and development of low noise ● Broadcastingt equipment ● Communication equipment
technology. Japan Servo also swiftly introduced computational fluid ● Industrial equipment ● Medical equipment ● Game machines
dynamics (CFD) to deliver quiet fans and blowers that customers can use
Customizing, safety standards, without worrying about designing noise reduction measures into their
3D data. application. Fans
Centrifugal
Centrifugal
● Versatile lineup of energy saving products Fan Characteristics
● Large airflow
The power consumption of fans may be problematic with some high ● Linear intake and outlet
airflow products and with large fans and blowers. When several units are ● Suitable for equipment with small
used, a high capacity power source must be installed. Japan Servo markets ventilation resistance
a large variety of high-efficiency fan motors that can reduce the power
capacity required for such machines. Blowers
Blower Features
Option
Option
● High static pressure
● Right angle intake and outlet
● Suitable for equipment requiring local
cooling and with large ventilation resistance.
G-2 G-3
Axial Centrifugal Silent Axial Centrifugal
Fans & Blowers DC fans AC fans Option
G-5
Motor Selection Guide (Blowers)
Fans & Blowers
AC/DC Axial
Motor Selection Guide (Fans)
Fans & Blowers
AC/DC Axial
G-4
DC fans AC fans Option
Fans & Blowers Silent Axial Centrifugal Silent Axial Centrifugal
AC/DC Axial AC/DC Axial
Fans & Blowers Technical Data Fans & Blowers Technical Data
By minimizing the ventilating resistance of the equipment and by 4. Fan and blower selection 6. Voltage imposed to fan and blower and PQ characteristics
Characteristics of Fans and Blowers
Fans & Blowers
DC fans
Axial
Axial
ventilating resistance.
3. Method for calculating the required fan airflow 2) If 3D data of the equipment is available, ask the fan manufacturer to
calculate the resistance. The speeds of fans and blowers vary in proportion of the voltage. Varying
The method to calculate the required airflows (ventilation rates) is 3) Install a fan or a blower, whose relationship between the PQ the voltage ±10 % will also cause the speed to vary by ±10 %. The speed
2. Differences in PQ characteristics of fans and blowers described for the cooling of equipment which generates heat. characteristics and speed is already known, within the equipment and affects the static pressure and airflow as follows. The static pressure varies
The airflow (ventilation rate) necessary for internal equipment cooling is determine the ventilating resistance by measuring the speed. based on the square of the speed and the airflow varies in proportion of the
As illustrated in Fig. 3, the PQ characteristics exhibit characteristic trends calculated as follows: (Note: the entire heat is exhausted by ventilation speed. Varying voltage±10 % will cause the maximum static pressure to
when a motor of equivalent power is used. The fan has a large airflow and airflow and heat from radiation or conduction is not taken into consideration) 5. PQ characteristics via the parallel or serial operations of vary ±21 %, and the max. airflow to vary ±10 %. (See Fig. 10.)
Centrifugal
Centrifugal
its static pressure is 1/2 to 1/5 that of the blower. The blower has large
axial fans Parallel operation of 2 fans An understanding of these relationships will allow free adjustment of the
static pressure and its airflow is 1/2 to 1/5 that of the fan.
W Q : Required airflow〔m3/s〕 PQ characteristics during fan and blower operation.
In the absence of a ventilating resistance (0 Pa), the max. airflow Q = When two fans are operated in parallel, only
(QFmax) flows, under circumstances where there are no objects located ρ×C × T W : Heat generation rate 〔 W 〕 the max. airflow will double. Intersections QF1
around the fan (This free air condition is the x-axis). However, this 7. Performance degradation of PQ characteristics when options
ρ: Specific weight of air〔kg / m3〕 and QF2 with ventilating resistance curves of
condition does not exist as long as a fan is assembled in equipment. The the equipment will be the airflow actually
are installed
state showing considerable ventilating resistance and a lack of airflow W C : Specific heat of air 〔J / kg°C〕
= flowing. This mode is advantageous when
corresponds to the y-axis in Fig. 3 and the airflow is zero because the air 1200 × T T: temperature rise of air〔°C〕 Options such as a fan guard and filter are sometimes installed for safety.
wishing to increase the airflow of equipment
does not move. In this condition, there are obstacles in front and to the (ρ and C are values at 25 °C. Use the value 1100 instead of 1200 at 50 °C) These options, however, increase the ventilation resistance and noise. A fan
with only modest ventilation resistance.
rear of a fan that prevent airflow or that shut off the circulation path of the guard has slight ventilation resistance and degrades the PQ characteristics
Silent
Silent
air. This operating condition cannot be considered when a fan is used for only negligibly. However, when tightly fitted onto a fan, the noise level
cooling or ventilation purposes. (Continuing operation in this condition may Example: When wishing to limit the air temperature rise inside equipment that increases by about 5 dB. In particularly, options should be installed more
damage the fan.) generates 100 W of heat, the following calculation formula is used: Serial operation of 2 fans than 10 mm away from the fan to minimize the increase in noise.
The actual operating conditions vary between the two aforementioned When two fans are operated in series
extremes. Fig. 3 plots four ventilating resistances (plotted via quadratic 100 (stacked), only the maximum static pressure Using a □120 mm×38 mm AC fan (CN55B3) as an example, fluctuations
curves). Units of equipment containing either a fan or a blower have Q = = 8.3 ×10-3 m3 / s = 0.50 m3 / min
of the PQ characteristics when options are installed are plotted in Figs. 12
1200×10 will increase by 1.5 times. Intersections QF1
varying ventilating resistances, of which these four curves show typical and 13.
and QF2 with ventilating resistance curves of
examples. The airflow flowing into the equipment is at the intersection
AC fans
AC fans
the equipment will be the airflow actually
Axial
Axial
between the ventilating resistance curve and the PQ characteristics of the
the required airflows (ventilation rate) can be translated into a graph as flowing.
fan or the blower. The curve of Ventilating Resistance 1, which has the
shown in Fig. 5. This mode is advantageous when wishing to
smallest inclination, is assumed to be the ventilating resistance of ordinary
increase the airflow of equipment with high
equipment. At this ventilating resistance, there are no large obstacles in
front and to the rear of the fan and an adequate circulation path is ventilation resistance.
provided. The fan can be operated most efficiently at this Ventilating (Note: A fan specially designed for a high static pressure region will be further
Resistance 1, where about 80 % of the maximum fan airflow is possible. advantageous for equipment that has high ventilating resistance. [See Fig. 9.])
Centrifugal
Centrifugal
(Airflow of QF2 with a fan and of QB2 with a blower respectively)
Of the four curves, the airflow of any equipment that has Ventilating
Serial operation of 2 fans with stationary blades for a high static
Resistance Curve 4, with the largest inclination, will be a fraction of the
max. airflow, even though a high performance fan or blower is installed. In
pressure region
When two fans are run in series (stacked),
this condition, the airflow will be QB1 with a blower and QF1 with a fan,
the airflow of the blower being larger. only the maximum static pressure will increase
The airflows of Ventilating Resistance Curves 2 and 3, in between, will by 1.8 to 2 times. Japan Servo special fans for
also be airflows at the intersection with the respective PQ characteristics. high static pressure regions have stationary
Japan Servo supplies fans dedicated to a high static pressure region, with blades and achieve a lower reduction in static
fan motors optimally designed for intermediate ventilating resistances. As pressure during serial operation. The
Option
Option
Fig. 4 explains, quieter and energy saving operations are more feasible in intersections QF1 and QF2 with ventilating
the high static pressure region compared with ordinary axial fans. (See resistance curves of the equipment will be the
page G-42) airflows actually flowing.
G-6 G-7
AC/DC Axial AC/DC Axial
Fans & Blowers Technical Data Fans & Blowers Technical Data
8. Unit conversion tables of PQ characteristics ■ Noise 5. Noise calculation 8. Object distance and noise value
Fans & Blowers
Mechanical motor vibration sound・ ・・Imbalanced revolutions, If all three fans emit 40dB, their total noise will be: equipment, the ventilating resistance cannot be zero and the noise values listed
Mechanical Vibration resonance and vibration transfer sound.
noise sound Electromagnetic sound of motor・ ・・Vibration sound by phase
L= 10 log(10 40/10+10 40/10+10 40/10) = 40+10 log3 = 44.8 dB in catalogs are for reference purposes only. A method used to estimate sound
Table 2 Airflow conversion table change (switching). The noise can be calculated from the following graph in Fig. 16 if values when fans are assembled in equipment is described below.
the noise difference between two fans is 13 dB or less: A noise value at each point of the PQ characteristics is called "load noise" and
m3/s m3/min l/S I/min m3/h ft3/S CFM
1 6.00×101 1.00×103 6.00×104 3.60×10 3.53×101 2.12×103
3 Cavity noise Air column resonance and other sounds fans and blowers have their own characteristics. (See Figs. 17 and 18.)
1.67×10-2
The load noise is the noise of the fan itself at the point of operation. Fan
1 1.67×101 1.00×103 6.00×101 5.89×10-1 3.53×101
characteristics include a "neck" (dip) in the plotted curves. This dip is caused by
1.00×10-3 6.00×10-2 1 6.00×101 3.60 3.53×10-2 2.12
2. Noise of fan turbulence in the airflow on the propeller surfaces and noise increases steeply
DC fans
DC fans
1.67×10-4 1.00×10-3 1.67×10-2 1 6.00×10-2 5.89×10-4 3.53×10-2
Axial
Axial
between this part and a low airflow region.
2.78×10-4 1.67×10-2 2.78×10-1 1.67×101 1 9.81×10-3 5.88×10-1
The noise of the fan itself (catalog noise) is measured in a small anechoic The fan has an area where noise becomes lowest (region of higher airflow
2.83×10-2 1.7 2.83×101 1.70×103 1.02×102 1 6.00×101
room, in which background noise is adequately low, in a free-air state with than the neck). The circulation path should be designed such as to reduce
4.72×10-4 2.83×10-2 4.72×10-1 2.83×101 1.70 1.67×10-2 1
no objects surrounding the fan. The aerodynamic noise (blade sound) and ventilating resistance. However, if the ventilating resistance cannot be reduced
motor sound are the principal noise sources. with any equipment after trying various ideas, the study of fans for a high static
9. Measurement method of PQ characteristics pressure region is recommended. These are fans that have been developed
3. Noise after installation in equipment and designed to emit low noise in a high static pressure region compared with
Centrifugal
Centrifugal
The aerodynamic characteristic measuring apparatus is illustrated in Fig. ordinary fans. (See Fig. 4 on pages G-6 and G-42.)
14. This apparatus conforms to the ANSI/AMCA Standard 210-85, as well After installing the fan in your equipment the noise level sometimes As plotted in Fig. 18, the load noise of blowers generally varies only slightly,
as JIS B 8330 (Testing methods for turbo-fans). increases drastically (up 8 dB to 15 dB) compared with the noise emitted by while trends in load noise differ from one product to another of the blower
It is very difficult to measure PQ performance with high accuracy and the the fan itself. This is caused by the resonance of the fan vibration within the manufacturers. Even if the catalog values are the same, noise invariably varies
various measuring equipment used by fan manufacturers feature a wide equipment, an obstacle in front of the intake (the fan guard may also
6. Speed and noise value at the same operating point.
range of accuracy. For this reason, simultaneous acquisition of comparable become an obstacle), an increase in load noise due to ventilating resistance, The blowers manufactured by Japan Servo are designed to emit the lowest
data obtained by the same measuring apparatus is recommended when A fan´s noise value is the total of the aerodynamic and motor noise. Most noise at customers' operating points so that the customers can base catalog
the use of a fan with excessively large power, an insufficient circulation path,
verification of strict variation in performance is desired. (Japan Servo also noise is aerodynamic in nature, except in products with a low speed. load noise values reliably as actual blower noise.
and other causes.
measures the comparative data of fans manufactured by other fan The speed and noise value vary in proportion to the sixth power and the
Noise can be reduced significantly by reducing the factors that increase
manufacturers as a customer service - please make use of this.) noise value increases when the speed increases. (Some people say that
Silent
Silent
noise. (In the best case scenario, only the noise level of the fan itself is Load noise of fan (CNDC24B7) Load noise of blower
they vary in proportion to the fifth power.) Increasing the speed will double
generated) (E1331K and SCBD [former model])
the max. airflow and quadruple the maximum static pressure. Noise
Japan Servo provides a service to analyze customers' equipment noise. 100 50 300 50
increases 18.1 dB (+15 dB at the fifth power).
Please contact Japan Servo with your requirements. 90 45 45
DB2 = dB1 + 60 log (N2/N1) 250 40
80 40
AC fans
Noise value 0
Axial
Axial
9603 Ventilating fans in Range A measurement, placed in a position 1 m in +2.5 dB +6.8 dB +10.6 dB +18.1 dB 30
100
front of the intake side of fans and blowers. (Background noise 15 dB (A)) 20
50
7. Propeller diameter and noise level 10 SCBD12B4
E1331K24B5AZ
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
The fan noise is strongly linked to the propeller size. Comparing the noise Airflow(m3/min) Airflow(m3/min)
Fig. 17 Fig. 18
of fans with equivalent speed, the noise theoretically varies to the seventh
power of the propeller diameter as follows:
In reality, the propeller shape is not symmetric and calculations cannot be
Centrifugal
Centrifugal
performed as explained in the theory. However, the noise value with
Noise meter equivalent airflow rate will be as shown in the following table, indicating that
a larger fan will reduce noise. (Value calculated based on the theory that the
airflow varies to the third power of the propeller diameter)
DB2 = dB1 + 70 log (D2/D1)
dB1: Noise value when the speed is D1
dB2: Noise value when the speed is D2
Option
Noise value with
equivalent speed −22.2 dB −12.7 dB −8.6 dB 0 +1.8 dB +6.7 dB
Fig. 15
Noise value with
equivalent airflow +34.8 dB +20.0 dB +13.5 dB 0 −2.8 dB −10.5 dB
G-8 G-9
AC/DC Axial AC/DC Axial
Fans & Blowers Technical Data Fans & Blowers Technical Data
DC fans
periodical fluctuations of blade lift due to non-uniform airflow (turbulence), eddy turbulences and increasing propeller resistance, thereby causing and rotor.
Axial
Axial
certification tests are marked with the mark on their nameplates and
caused by an object on the upstream side of the fan and attributed to the noise. The AC fan holds a bearing in a dedicated sleeve to help retard the transfer model names are registered, to attest that they are certified products.
shape of the fan venturi. of heat generated by the rotor, and limit the temperature rises of the The registration No. of Japan Servo is
The Japan Servo Silent Fans, part of the range of axial fans with a unique bearing. E 48889: Fans and blowers
venturi shape, are renowned for their particular quietness. Compared with The DC fan has an external rotor structure and the temperature of the E 78112: Plugs and cords
conventional square venturi Japan Servo products, the noise emitted by the bearing is significantly affected by stator temperature. When the speed rank (Category Nos. W1007, W1008)
silent fans are 5 dB to 8 dB lower. To prevent non-uniform airflow on the rises, the motor temperature also rises, thereby increasing the heat transfer Non-regular factory audits by UL are conducted in connection with the
upstream side of the fan, the venturi mounting flange has a single flange on to the bearing. Japan Servo fans feature a high-efficiency circuit and low production of certified products and safety verification is performed by
Centrifugal
Centrifugal
the outlet side only, as illustrated in Fig. 19. The intake flow velocity and Turbulence motor losses to keep the bearing temperature below the preset temperature, ensuring the materials used, electrical characteristics and other items pass
direction of the fan are made constant through analysis of the air intake flow thereby ensuring a long life. strict factory test inspections.
to prevent separation of flow from the peripheral parts of the venturi, thereby The bearing temperature differs depending on the structure, materials and
achieving exceptional quietness. Thanks to the design preventing flow other factors and life varies to some extent. However, the life expectancy as
disturbance on the intake side when a fan is mounted, a premium silence
Sectional view ◆ Certification test by the CSA Standard
illustrated in Fig. 23 is the basic data.
effect unrivalled by conventional square fans is achieved. Fig. 20
Japan Servo accepts inquiries and orders for semi-customized products Japan Servo fans and blowers have been accepted in certification tests,
(long life products) featuring a reduction in bearing temperature increase. based on general specification requirements and rules to prevent
(Note: In recent years further progress in CFD (Computational Fluid Dynamics) Please contact Japan Servo for further information. overheating inside motors under fan and blower safety test standard CSA
technology has enabled the development of new concepts to retard shear flows. The life expectancy curve that is common to AC and DC fans is plotted in STANDARDS C22.2 Nos. 113 and 0.077 of the CANADIAN STANDARDS
Silent
Silent
These concepts will be applied to our easy-to-use square fans to substantially Fig. 23. (The curve represents the life expectancy based on a survival rate ASSOCIATION, the electrical appliance safety inspection organization of
reduce noise. Be sure to look for these new products coming soon.) of 90 % and is not the guaranteed life. Japan Servo will provide the MTTF Canada. Products that are accepted in certification tests are marked with the
(mean time to failure) data upon request.) mark on their nameplates and model names are registered, to attest that
they are certified products under the CSA standards.
100,000
The registration No. of Japan Servo is
LR49399: Made in Japan
LR108118: Made in Indonesia
As with the UL standards, safety verification is performed by ensuring non-regular
AC fans
AC fans
Axial
Axial
factory audits are performed by CSA.
(Some products are certified by the + mark.)
Japan Servo fans and blowers have been accepted in safety certification
tests based on the Business-Use Electrical Equipment Standard EN60950
Centrifugal
Centrifugal
1,000 and the VDE Standard No. 0806/08.81 of T RHEINLAND e.V, the industrial
10 20 30 40 50 60 70 80
Ambient temperature (℃) electrical appliance safety inspection organization of Germany. Products
Fig. 23 Life expectancy curve (Survival rate 90 %) that are accepted in certification tests are marked with the mark on their
nameplates and model names are registered, to attest that they are certified
(Note: This life expectancy curve has been prepared based on the results of life
products under the TUV standards.
tests conducted at a rated voltage in a free air condition in an environmental test
The registration Nos. of Japan Servo are:
room with a negligible amount of dust. When using the fans in your application
LICENCE No.:R60299, R60300, R60301, R60302, R9451586
please take into consideration the actual operating conditions and safety factors.
:R9750695, R9750455, R9650662, R2-50004410
Some of the products contained in the catalogs do not meet the foregoing life
REPORT No.:E61087, E61088, E61089, E61090
Option
Option
expectancy data. [Products which do not meet the standard life are listed on the
As under the UL and CSA standards, safety verification is performed by
product information pages.])
clearing non-regular factory audits by TUV.
(Definition of life: End of life is defined when the speed or noise of a product
deteriorates by 20 %)
G-10 G-11
AC/DC Axial AC/DC Axial
Fans & Blowers Technical Data Fans & Blowers Technical Data
DC fans
Axial
Axial
energizing circuit being turned off by a lock detection function inside the A static electricity measure is needed if a terminal trailing from the fan ON-OFF switching in DUTY control. Please note that this operating
● Dielectric strength motor drive circuit when the fan is locked, shutting off (or limiting) the current. method increases fan vibration, increasing the likelihood of abnormal
motor is touched, otherwise the circuit is prone to damage by static
Operation is reactivated automatically after the locking is reset. Note that electricity. sounds due to vibration. Dedicated fans and blowers are recommended
The AC fans and blowers of Japan Servo satisfy 1500 V 50 Hz for this protection system does not function properly if used with duty (PWM) for variable-speed operations. (See pages G-40, G-41, G-58, and G-59.)
one minute or 1800 V 50 Hz for one second. Dielectric strength tests control power supply. Japan Servo supplies variable-speed fans whose
under JIS C 4004 specify a voltage impression of "2 x rated voltage +
● Handling of the alarm output lead wires
speed can be variably controlled by a PWM signal. (See pages G-40, G-41, ● Connect multiple DC fans and blowers in parallel
1000 V." and G-58.) Inadvertently using a tester or other apparatus with a sensor lead wire will
The DC fans and blowers of Japan Servo are accepted in withstand
Centrifugal
Centrifugal
cause overcurrent to flow to the sensor circuit inside the motor, potentially Connect multiple fans and blowers in parallel to the power supply.
voltage tests of 500 V 50 Hz for one minute or 600 V 50 Hz for one
causing a circuit fault. Pay attention to the permissible current and prevent A serial connection (example: two 12 V products connected serially to a
second. The interrupting current of 5 mA is set for the dielectric strength
any overcurrent from flowing. Contact Japan Servo if it becomes necessary 24 V power supply) will cause the voltage for each product to fluctuate,
testers.
to connect an LED or relay directly to a sensor lead wire. (There are resulting in a drastic excess of the usage range and circuit failure.
Dielectric strengths are tested between the power terminal of the
products that allow a current larger than the permissible current described Please direct your questions or inquiries to Japan Servo Sales or to the
fan/blower or lead wire conductor (two lead wires tied together) and
on page G-15 depending on conditions.) Japan Servo website.
metal frame (or other metal part) using a dielectric strength tester.
Silent
Select a power source that supplies smooth power (ripples within ±5 %,
The insulation resistance of the AC and DC fans and blowers of Japan
peak within operating voltage). Significant line noise (including surge
Servo is 10 MΩ or higher at 500 V DC between the power terminal or lead
voltage) causes circuit faults. Make it a point to check line noise after
wire conductor and frame. Insulation resistance tests are conducted
assembling a fan.
between the power terminal of the fan/blower or lead wire conductor (two
Select a power source remembering that a current 2 to 5 times the rated
lead wires tied together) and metal frame (or other metal part) using an
current flows at startup. (If an inrush current [normally less than 10 μs]
insulation resistance tester.
poses a problem, measure it and take action accordingly.)
The operating current peaks when the motor load is largest (at maximum
● Electrical performance
AC fans
AC fans
static pressure for fans and in free air condition for blowers). When
Axial
Axial
assembled, the current sometimes exceeds the rated current (fans) or
The values described in the catalog are average values. Please request smaller (blowers). (See the diagrams below.)
Japan Servo to send a product drawing or delivery specification for products When current is flowing, connect all terminals from the fan motor before
when wishing to confirm standard values. turning it on. Imperfect wiring connection or a wiring change while the power
is turned on will damage the circuit inside the fan or cause it to deteriorate.
● Temperature protection
Centrifugal
Centrifugal
Two methods are used to protect the temperature of the windings of AC
fans and blowers, namely, impedance protection and thermal protection.
These two methods are used differently depending on the type of motor
used.
Option
Option
G-12 G-13
AC/DC Axial AC & DC Fans &
Fans & Blowers Technical Data Blowers with Sensors Technical Data
Operational and handling precautions 4. Do not apply a load of 2 kgf or more to the connecting part of the lead
DC axial fans & blowers with sensors
Fans & Blowers
will adversely affect the circuit and ball bearings. restarts operation within five seconds when the lock is unlocked. ([H] → [L] AC fans with sensors
3) Avoid operating a fan or a blower in relative humidity exceeding 90 %. 5 s). If the pull-up voltage is live, the [H] state (transistor is OFF) will engage
• Strive to ensure the channel shape is as smooth as possible to avoid
4) The maximum storage temperature is normally 70 °C. Products with an in less than five seconds, even when the power is turned off. By equipping the motor with a rotation detection function, the AC fans of
stagnation in the airflow.
operating temperature of 70 °C or higher can be operated only up to the Japan Servo have a system to send an alarm signal when the fan motor
• Make the flow velocity larger around the object for which cooling is desired.
specified temperature. Check the operating temperature range on the ● Specification: VCE = 28 V max ● Output waveform revolutions slow down and to cut off the system power supply. In 1980,
• Place the fan on the downstream side when wishing to cool the entire
product information pages. (55.2 V max for 48 V products) Japan Servo developed a system to output an alarm signal by detecting the
space inside the equipment.
5) Exercise reasonable care with condensation when returning to an Locked Unlocked
lowering of generated voltage by installing a tachometer generator with the
• An upward flow in conjunction with the ascension of heated air is IC = 5 mA max
environment higher than 0 °C from storage or operating conditions below When the blades
cooling fan and this system has since been incorporated in Japan Servo
recommended for airflow inside equipment.
DC fans
DC fans
When the blades are turning
freezing point. Condensation results in failure and shortens the life. (VCE (SAT) = 0.4 V max) are turning
Axial
Axial
• Take actions to mitigate the impacts of fans and for reverse flow in the 1 s or less
5 s or less 5 s or less products. The output type of the alarm signal is an open collector output.
6) The life may shorten considerably if a fan or a blower is installed in
event of failure where multiple fans are installed. VH
equipment that vibrates prominently. Japan Servo products conform to JIS Fan
Ic = 5 mA max. ■ Sensor specification
C 0040 (Vibration testing methods for small motors) and withstand a L
Yellow
+28 V max.
maximum vibration acceleration of 9.1 G maximum (10 Hz to 55 Hz, R
1. When placing an object on the fan intake side, VL
amplitude 1.5 mm, sweep 1 minute/cycle, two hours each in X, Y and Z 0V
try to maintain a distance of more than half a blade
φD
Sensor output sec.
directions). However, operation at 5 G or less is recommended.
diameter. ※When the power is turned on, the state sometimes
7) AC and DC fans and blowers cannot be operated while the intake side is
Centrifugal
Centrifugal
L 0.5 becomes high [H] for several hundred ms.
tightly closed. This will shorten the motor life and result in circuit failure. D>
8) Operation near a high frequency power source may on rare occasions
cause inflow of an induced current into the inside of a fan, shortening the life 2. Pulse output type (Product code: P)
2. The pressure varies on the fan intake and Air leak
(and increasing noise due to BB galvanic corrosion). If an induced current
outlet sides. The leakage of air from the outlet
flows, measures to prevent such inflow are needed. A rectangular wave of two pulses will be output for each turn of the
side causes noise. Minimize air leakage from
the outlet side when installing a fan. propeller while the propeller is rotating, outputting two types of signal
2. Imposed voltage and frequency depending on the propeller position when the propeller is locked. (See the
note below ※)
1) The permissible range of AC fans and blowers is ±10 % of the rated
voltage. Operations outside of the rated frequency result in considerable 3. Design the channel (circulation path) selecting
Silent
Silent
a good flow direction in terms of both noise and ● Specification: VCE = 28 V max ● Output waveform
fluctuations in performance and life. Operations in serial connection
(example: two 100 V products connected serially to a 200 V power supply) PQ characteristics. (55.2 V max for 48 V products)
will increase the imposed voltage beyond the permissible range and should IC = 5 mA max
● Ventilating resistance can be expressed
be avoided. (VCE (SAT) = 0.4 V max) VH ■ Operational and handling precautions
by the following formula:
2) Use a sufficiently smooth power supply with DC fans and blowers. N Fan
1 Ic = 5 mA max.
Operate fans and blowers at an ambient temperature of between -10 °C
(Ripples of ±5 % or less, and peak within the usage range) The usage range P=0.000243Q 2 Σ 2
VL
0V
differs from one product to another. Check it on the product information i=1 Ai Yellow
+28 V max. T1 T2 T3 T4 and 60 °C and relative humidity of less than 90 %. Latch output is not used
R sec.
pages. A reduction of Ai (the channel cross sectional area) is critical. Avoid any so malfunction by electrical noise can be ruled out. However, note that the
AC fans
AC fans
T0
Axial
Axial
sharp change in the cross sectional area in the flow direction. (1 turn) semiconductor devices in the internal circuitry may be damaged by electrical
Sensor output T1∼T4 ≒ 1/4 T0 = 60/4 N (sec.)
noise and high voltage. No delay circuit is provided so a trouble signal is
3. Installation orientation ※Output signal waveform when the fan is stopped: The following
output on startup. As when operating and handling the fan, exercise caution
two types of waveform are output, depending on the blade position
There are no installation orientation limitations for products containing ball when the propeller is stopped: to avoid dropping and exposing the blower to shock and vibration.
bearings. Operate fans and blowers in compliance with the operating ● Avoid any sharp change in flow Pulse outputs of High - constant or restart timing (0.05 Hz to 2 Hz).
environment temperature and other conditions. Contact Japan Servo for direction. ■ Sensor connection
further information or if clarification is needed.
3. Speed detection type (Product code: Q)
Centrifugal
Centrifugal
Sensor circuit
■ Handling precautions
● Avoid placing a printed circuit board The output signal indicates the [H] state when the propeller revolutions are Yellow
Output
and other parts orthogonal to the flow slower than the preset speed, changing to the [L] state when the propeller
The fan motors of Japan Servo contain double side shielded precision ball
direction. revolutions exceed the reset speed. White
bearings. Dropping the product could result in abnormal noise (Brinell dent) 0V
[Products with a reversed output waveform are also available, suitable for a
of ball bearings during operation. Exercise care when handling the products
wired OR connection when several fans are installed. Contact Japan Servo
as follows: 1. LED Display 2. Relay operation
for further information. {Former code: SQ, new code (15 - digit code
1. Product falling: Avoid dropping the product from a height of 5 cm or +V
products): R} ]
Sensor circuit
Sensor circuit
higher. 4. Drill fan mounting holes to ensure R 3 Use in tandem with
Air separation
Option
2. Falling of crated product: Avoid dropping a crated product from a height of Ω +V a flyback diode.
40 Limit the coil current
30 cm or higher. referring to the recommended dimensions Relay coil
to 50 mA or less.
3. Storage and stacking of crated products: Crated products may be stacked for fan mounting holes on the fan or 0 0
up to seven layers. Take sufficient precautionary measures to prevent blower's catalog page.
※ A sensor is available with the AS ad PL series only.
getting them wet.
G-14 G-15
Brushless Brushless
DC Fans & Blowers SKUD series □ 92 × φ100 × 25 mm DC Fans & Blowers SKLD series □ 92 × φ100 × 32 mm
Silent
Fan model code Fan model code
● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
SKLD12B4 Common Elec. Spec. See pages G-11, G-12, G-13.
● The characteristics are the values at rated voltage (12 V, 24 V or 48 V), and normal temperature and humidity.
SKUD12B4
SKLD12B4S Standard Carton 60 to a carton of (450 x 380 x 300) mm, mass 10 kg
SKUD12B4P ■ General specification SKLD12Z7 ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
SKUD12B4S
SKLD12Z7P characteristics (At rated voltage) ● Lead wire type
SKUD12D4 Venturi: ABS and PBT synthetic resins
Materials Used Propeller: ABS and PBT synthetic resins SKLD12Z7S [By double chamber method]
SKUD12D4P 32±0.5
Bearing: Both side shielded ball bearing SKLD24B4 (Pa) □92±1 (3.62 sq.) 300±30
(1.26±0.02)
SKUD12D4S □82.5±0.3 (11.8±1.2)
DC fans
DC fans
SKLD24B4S 100 5 10
Axial
Axial
Brushless DC motor, Protection type: Current shut off (3.248 sq.±0.012)
SKUD12H7 Motor (0.20) (0.39)
by detecting lock state, automatically reset SKLD24Z7
SKUD12H7P 80
Static pressure
8
4-φ
SKUD12U7S characteristics (At rated voltage) ● Lead wire type 20
[By double chamber method] 25.5±0.5 SKLD...B4
Centrifugal
Centrifugal
SKUD12Z7 □92±1 (3.62 sq.) 300±30 4-φ 4.5±0.3
(1±0.02) 0
(Pa) (11.8±1.2) Rotation (4-0.18 dia.) Airflow
□82.5±0.3 5 10 0 0.5 1.0 1.5 2.0
SKUD12Z7P 80
SKUD...U7 (3.248 sq.±0.012) (0.20) (0.39) Airflow (m3/mi
n) Lead wire spec. AWG24 UL1007 or UL3266
SKUD12Z7S 70
SKUD...H7 Color (+) Red
SKUD24B4
50 SKUD...Z7
SKUD24B4P
40 SKUD...B4 ■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches)
SKUD24B4S 30 SKUD...D4
8
[Recommendation]
SKUD24D4 20 4-φ □89 (3.5 sq.)
Power source (+): Red
SKUD24D4P 10
4-φ 4.5±0.3 □82.5 (3.248 sq.)
Silent
Silent
0 (4-0.18 dia.)
SKUD24D4S Rotation
0 0.4 0.8 1.2 1.6 2.0 Airflow Sensor output: Yellow
SKUD24H7 Airflow (m3/mi
n) 4 )
Lead wire spec. AWG24 UL1007 or UL3266 10 ia.
SKUD24H7P Color (+) Red φ .1 d
(4
( - ) Black (SKUD□D4: Blue)
SKUD24H7S When sensor is installed
SKUD24U7 ■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches)
Power source (-): Black
SKUD24Z7 [Recommendation] 4-φ 4.5
SKUD24Z7P □89 (3.50 sq.) (4-0.18 dia.)
Power source (+): Red Outlet side
AC fans
AC fans
Axial
Axial
SKUD24Z7S □82.5 (3.248 sq.)
SKUD48B4 Sensor output: Yellow Options (sold separately) Options (sold separately)
4 .) ・Guard: F92UL guard ・Guard: F92UL guard
SKUD48Z7 10 ia Ensure the guard is situated more than Ensure the guard is situated more than
φ 9d
.0 10 mm from the fan to minimize noise 10 mm from the fan to minimize noise
(4 increase when mounting a guard on increase when mounting a guard on
When sensor is installed the intake side. See page G-10. the intake side. See page G-10.
Power source (-): Black or blue ・Filter: F92 filter ・Filter: F92 filter
4-φ 4.5
Centrifugal
Centrifugal
(4-0.18 dia.)
Outlet side
Options
SKUD24D4P SKUD24B4P SKUD24Z7P SKUD24H7P SKLD24Z7P
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed ● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage. specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586 ● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp). ● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
Sensor Spec. G-15 Options G-72, 73, 74 Sensor Spec. G-15 Options G-72, 73, 74
G-16 G-17
Brushless Brushless
DC Fans & Blowers SCUDM series □ 120 × φ128 × 25 mm DC Fans & Blowers SCUD series □ 120 × φ128 × 25 mm
Silent
Fan model code Brushless DC motor, Protection type: Current shut Fan model code
Motor Common Elec. Spec. See pages G-11, G-12, G-13.
SCUDM12B4 off by detecting lock state, automatically reset SCUD12B4 The guard for the intake side (SCU guard) can be
User panel Standard Carton 30 to a carton of (450 x 380 x 160) mm, mass 7.5 kg
SCUDM12B4P Common Elec. Spec. See pages G-11, G-12, G-13. or guard mounted with one touch without using a tool.
SCUD12B4P
SCUDM12B4S Standard Carton 60 to a carton of (450 x 380 x 300) mm, mass 12 kg Nut pocket SCUD12B4S ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
SCUDM12D4 SCUD12B4SQ
M4 nut pockets provided in 4 places for easy characteristics (At rated voltage) ● Lead wire type
SCUDM12D4P mounting. (The customer to provide nuts) SCUD12D4 [By double chamber method] 25.5±0.5
SCUDM12D4S □120 (4.73 sq.) (1±0.02)
(11.8±1.2)
SCUD12D4S
■ Standard airflow and static pressure ■ External dimensions in mm (inches) (Pa)
300±30
DC fans
DC fans
□104.8±0.3 10
SCUDM24B4
Axial
Axial
SCUD24B4 80 4
SCUDM24B4Q
characteristics (At rated voltage) ● Lead wire type (4.126 sq.±0.012)
(0.16)
(0.39)
[By double chamber method] SCUD24B4P
Static pressure
□120±1 (4.73 sq.) (Nut pocket)
25.5±0.5 60
SCUDM24B4S (Pa) (1±0.02) SCUD24B4S
□104.8±0.3
SCUDM24D4 (4.126 sq.±0.012) 5 10 SCUD...B4
φ 128 (5.04)
80 SCUD24D4
Detail of Part L
(0.20) (0.39) 40
SCUDM24D4S SCUD24D4S
Static pressure
L
60
20
(5.04 dia.)
SCUDM...B4
φ 128±1
300±30
Centrifugal
Centrifugal
40 SCUD...D4
(11.8±1.2) 0
0 1 2 3
20 Airflow (m3/mi
n) 4-φ 4.5 Lug for
(4-0.18 dia.) guard mounting
Rotation
SCUDM...D4 Airflow
(Nut pocket)
0
0 1 2 3 4-φ 4.5±0.3 Lead wire spec. AWG24 UL1007 or UL3266
Airflow (m3/mi
n) Rotation (4-0.18 dia) Airflow Color (+) Red
( - ) Black (SCUD□D4: Blue)
φ
Silent
■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches)
[Recommendation] Power source (+): Red □117 (4.61 sq.)
□104.8 (4.126 sq.)
Power source (+): Red
□117 (4.61 sq.) Options (sold separately) Sensor output: Yellow
□104.8 (4.126 sq.) ・Guard: F120UL guard
Sensor output: Yellow
Ensure the guard is situated more than 8
12 ia.)
10 mm from the fan to minimize noise φ 4d
. 0
increase when mounting a guard on When sensor is installed (5
8
12 a.)
AC fans
AC fans
the intake side. See page G-10.
φ 4 di
Axial
Axial
When sensor is installed 0 Power source (-): Black or blue
(5
. ・Filter: F120 filter
Power source (-): Black or blue
4-φ 4.5
(4-0.18 dia.)
Outlet side
4-φ 4.5
(4-0.18 dia.)
Options (sold separately)
Outlet side
・Guard: F120UL guard (Outlet side)
Centrifugal
Centrifugal
・Guard: SCU guard (Intake side)
Options
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed ● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage. specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586 ● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp). ● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
Sensor Spec. G-15 Options G-72, 73, 74 Sensor Spec. G-15 Options G-72, 73, 74
G-18 G-19
Brushless Brushless
DC Fans & Blowers SCNDM series □ 120 × φ128 × 38 mm DC Fans & Blowers SCND series □ 120 × φ128 × 38 mm
Silent
Fan model code Fan model code
Venturi: ABS and PBT synthetic resins M4 nut Brushless DC motor, Protection type: Current shut
Materials Used Propeller: ABS and PBT synthetic resins SCND12B4 Motor
SCNDM12B4 off by detecting lock state, automatically reset
Bearing: Both side shielded ball bearing Venturi SCND12B4Q
SCNDM12B4S Common Elec. Spec. See pages G-11, G-12, G-13.
Brushless DC motor, Protection type: Current shut SCND12B4S The guard for the intake side (SCU guard) can be
SCNDM12D4 Motor Standard Carton 20 to a carton of (450 x 310 x 160) mm, mass 7.5 kg mounted with one touch without using a tool.
off by detecting lock state, automatically reset SCND12B4SQ
SCNDM12D4S User panel
SCNDM12Z7
Common Elec. Spec. See pages G-11, G-12, G-13. or guard SCND12D4 ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
SCNDM12Z7S
Standard Carton 40 to a carton of (450 x 380 x 300) mm, mass 12 kg Nut pocket SCND12D4P characteristics (At rated voltage) ● Lead wire type
DC fans
DC fans
[By double chamber method]
Axial
Axial
SCND12D4S
SCNDM24B4 M4 nut pockets provided in 4 places for easy
38.5±0.5
(11.8±1.2)
mounting. (The customer to provide nuts) SCND12D4SQ (Pa)
300±30
SCNDM24B4Q □120 (4.73 sq.) (1.52±0.02)
SCND12Z7 100
SCNDM24B4S □104.8±0.3 4 10
■ Standard airflow and static pressure ■ External dimensions in mm (inches) (0.16)
Static pressure
SCND12Z7S 80 SCNDM...Z7 (4.126 sq.±0.012) (0.39)
SCNDM24D4
characteristics (At rated voltage) ● Lead wire type Lead wire spec. AWG24 UL1007 or UL3266
SCND12Z7SQ
SCNDM24D4Q [By double chamber method] Color (+) Red 60
( - ) Black (SCNDM□D4: Blue) SCND24B4 SCNDM...B4
SCNDM24D4S
(Pa) 40
128 (5.04)
(Nut pocket)
Centrifugal
Centrifugal
SCND24B4Q
SCNDM24Z7 100 □120±1 (4.73 sq.) 300±30
38.5±0.5
(1.52±0.02) SCND24B4S 20
SCNDM24Z7P □104.8±0.3 (4.126 sq.±0.012) (11.8 sq.±1.2) 5 10
Static pressure
Silent
Airflow (m3/mi
n) (Nut pocket) SCND24Z7Q
SCND24Z7S ■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches)
Rotation Airflow
[Recommendation]
9
φ
AC fans
□104.8 (4.126 sq.) Options (sold separately)
Sensor output: Yellow φ 8d
Axial
Axial
・Guard: F120UL guard When sensor is installed .2
(5
Ensure the guard is situated more than
10 mm from the fan to minimize noise Power source (-): Black or blue
4
13 ia.) increase when mounting a guard on
When sensor is installed φ 8d
. 2 the intake side. See page G-10.
(5
Power source (-): Black or blue ・Filter: F120 filter 4-φ 4.5
(4-0.18 dia.)
Outlet side
Centrifugal
Centrifugal
4-φ 4.5
(4-0.18 dia.)
DC axial fan with sensor
Outlet side Rated Voltage Model Code
SCND12D4S SCND12B4S SCND12Z7S
DC axial fan with sensor
12 V SCND12D4P SCND12B4Q
Rated Voltage Model Code SCND12D4SQ SCND12B4SQ SCND12Z7SQ
12 V SCNDM12D4S SCNDM12B4S SCNDM12Z7S SCND24D4S SCND24B4S SCND24Z7S
SCNDM24D4S SCNDM24B4S SCNDM24Z7S SCND24Z7P
24 V
24 V SCNDM24Z7P SCND24D4Q SCND24B4Q SCND24Z7Q
SCNDM24D4Q SCNDM24B4Q SCND24B4SQ
Options
Options
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed ● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage. specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586 ● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp). ● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
Sensor Spec. G-15 Options G-72, 73, 74 Sensor Spec. G-15 Options G-72, 73, 74
G-20 G-21
Brushless Brushless
DC Fans & Blowers EUDC series □ 40 × 13mm DC Fans & Blowers D0410C series □ 40 × 10 mm
Static pressure
Mass: 26 g Bearing: Both side shielded ball bearing 40 (12.6+1.2
)
0
Fan model code
Brushless DC motor, Protection type: Current shut 30
Silent
Silent
Fan model code Motor D0410C05B7AZ-00
off by detecting lock state, automatically reset
EUDC12B8 D0410C12B7AZ-00
20
Common Elec. Spec. See pages G-11, G-12, G-13. 4-φ 3.5±0.3
EUDC12B8S 10 Rotation Airflow
Standard Carton 400 to a carton of (450 x 380 x 300) mm, mass 12 kg (4-0.14 dia.)
EUDC12D8
0
EUDC12D8S 0.1 0.2 Lead wire spec. AWG24 UL1007
EUDC12Z8 ■ Standard airflow and static pressure ■ External dimensions in mm (inches) Airflow (m3/mi
n) Color (+) Red
( - ) Black
EUDC24B8 characteristics (At rated voltage) ● Lead wire type
[By double chamber method]
DC fans
DC fans
EUDC24B8S +1
12.7 (0.5 +0.04
) DC axial fan
Axial
Axial
D0428C series
0 0
(Pa)
□ 40 × 28 mm
(11.8±1.2)
D0428C
300±30
110
100
90 EUDC...Z8 ■ Standard specification
Static pressure
(1.26 sq.±0.008)
80
□32±0.2
(1.58 sq.)
□40 +10
70 Max. Airflow Max. Static Pressure Noise Speed Input Voltage Spec. V Current mA Operating Temp.
60 EUDC...B8 Model Code
m3/min CFM Pa inH2O dB min−1 W Rating Operating Range Rating Starting Range ℃
50
40 EUDC...D8 3.4 5 4.5-5.5 680 950 D0428C05B7AZ-00
Centrifugal
Centrifugal
30 Rotation 4-φ 3.5±0.3 Airflow 0.32 11 103 0.41 37 8700 2.34 12 7-13.8 195 600 D0428C12B7AZ-00 -10 ∼ +60
20 (4-0.14 dia.)
10 2.28 24 12-27.6 95 310 D0428C24B7AZ-00
0 ● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
0.1 0.2 0.3
Lead wire spec. AWG24 UL1007 or UL3266
Airflow (m3/mi
n) Color (+) Red
● The characteristics are the values at rated voltage (5 V, 12 V or 24 V), and normal temperature and humidity.
□40×28 (□1.6"×1.1")
( - ) Black
Max. airflow: 0.32 m3/min
Max. static pressure: 103 Pa ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches) Mass: 52 g characteristics (At rated voltage) ● Lead wire type
[By double chamber method]
[Recommendation] Fan model code (Pa) □40 (1.58 sq.) 28±0.5
Silent
Silent
□32±0.3 (1.102±0.02)
Power source (+): Red D0428C05B7AZ-00 110
(1.26 sq.±0.008) 4 4
□ 32 100
(1.26 sq.) D0428C12B7AZ-00 90 (0.16) (0.16)
Static pressure
Sensor output: Yellow +30
D0428C24B7AZ-00 80 320 0
+1.2
70 (12.6 )
0
4-φ 3.5
8 (4-0.14 dia.) 60
φ 3 dia.) 50
When sensor is installed 5
(1.
40
Power source (-): Black or blue 30
AC fans
AC fans
4-φ 3.5±0.3
Rotation Airflow
Axial
Axial
20
(4-0.14 dia.)
10
0 Lead wire spec. AWG24 UL1007
0.1 0.2 0.3 Color (+) Red
Airflow (m3/mi
n) ( - ) Black
Centrifugal
[Recommendation]
□39
Power source (+): Red (1.54 dia.)
□32
(1.26)
DC axial fan with sensor (□15)
Power source (-): Black
Rated Voltage Model Code
12 V EUDC12D8S EUDC12B8S
2)
.5
24 V EUDC24B8S
(1
Options
Options
.5
Identical for the intake
38
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed and outlet sides
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586 4-φ 3.7 (4-0.15 dia.)
● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
Silent
Fan model code Fan model code 12 8.4-13.8 80 210 TUDC12D4F TUDC12D4
D0515C12B7AZ-00 0.35 12 24 0.10 20 2750 0.9
TUDC12B4 24 14.4-27.6 40 110 TUDC24D4F TUDC24D4
D0515C24B7AZ-00 TUDC12B4F ● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
TUDC12B4P ● The characteristics are the values at rated voltage (12 V, 24 V or 48 V), and normal temperature and humidity.
TUDC12B4S
Lead wire spec. AWG24 UL1007
Color (+) Red TUDC12D4 ■ General specification
( - ) Black TUDC12D4F Venturi: ABS and PBT synthetic resins
TUDC12D4FS Materials Used Propeller: ABS and PBT synthetic resins
DC fans
DC fans
TUDC12D4S Bearing: Both side shielded ball bearing
Axial
Axial
DC axial fan TUDC12H4
Brushless DC motor, Protection type: Current shut
Centrifugal
m3/min CFM Pa inH2O dB min−1 W Rating Operating Range Rating Starting Range ℃ TUDC12N7P
characteristics (At rated voltage) ● Lead wire type Lead wire spec. AWG24 UL1007 or UL3266
TUDC12U7 Color (+) Red
1.56 12 10.2-13.8 130 300 D0620C12B7AZ-00 [By double chamber method]
0.42 15 32 0.13 31 4200 TUDC12U7F ( - ) Black (TUDC□D4: Blue)
1.68 24 20.4-27.6 70 240 D0620C24B7AZ-00 -10∼+60 TUDC12U7P
0.55 19 53 0.21 41 5600 3.36 48 43-53 70 220 D0620C48B7AZ-00 TUDC12U7S
● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification. TUDC12Z4
● The characteristics are the values at rated voltage (12 V, 24 V or 48 V), and normal temperature and humidity. TUDC12Z4F
□60×20 (□2.4"×0.8") TUDC12Z4FS
Max. airflow: 0.55 m3/min ■ Standard airflow and static pressure ■ External dimensions in mm (inches) TUDC12Z4P
Max. static pressure: 53 Pa characteristics (At rated voltage) ● Lead wire type TUDC12Z4S
Mass: 90 g
Silent
Silent
[By double chamber method] TUDC24B4
TUDC24B4F
Fan model code
TUDC24B4S
D0620C12B7AZ-00 TUDC24D4
D0620C24B7AZ-00
■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches)
TUDC24D4F
D0620C48B7AZ-00 TUDC24D4S
[Recommendation]
TUDC24H4 Options (sold separately)
TUDC24H4F ・Guard: F60UL guard
P60P guard
AC fans
AC fans
TUDC24H4P
Axial
Axial
TUDC24H4S
TUDC24N7
Lead wire spec. AWG24 UL1007 TUDC24N7F
Color (+) Red TUDC24N7P
( - ) Black
TUDC24N7S
TUDC24Z4
DC axial fan with sensor
Common to D515C/D0620C Series TUDC24Z4F
Rated Vol. Model Code
Centrifugal
Centrifugal
■ Wiring connection ■ Mounting hole dimensions in mm (inches) [Recommendation] TUDC24Z4FS
TUDC24Z4P TUDC12D4S TUDC12B4S TUDC12Z4S TUDC12H4S TUDC12U7S
diagram ● D0515C series ● D0620C series TUDC24Z4S 12 V TUDC12D4FS TUDC12Z4FS TUDC12H4SF
TUDC12B4P TUDC12Z4P TUDC12H4P TUDC12U7P TUDC12N7P
TUDC24Z4SQ
TUDC24D4S TUDC24B4S TUDC24Z4S TUDC24H4S TUDC24N7S
TUDC48B4
TUDC24Z4SQ
TUDC48B4P 24 V
TUDC24Z4FS TUDC24N7P
TUDC48B4S TUDC24Z4P TUDC24H4P
) TUDC48H4 TUDC48B4S TUDC48Z4FS
a.
di
.4
8 TUDC48H4P 48 V TUDC48B4P TUDC48Z4P TUDC48H4P
(2
63 TUDC48Z4 TUDC48Z4FP
Options
Options
φ
TUDC48Z4F ● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
TUDC48Z4FP specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
TUDC48Z4FS ● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
● Customizing to the sleeve bearing specification also accepted depending on the intended purchase quantity. Contact Japan Servo for further information.
TUDC48Z4P ● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
12 7.2-13.8 320 730 PUDC12H4 PUDC12H4R -20 ∼ +60 ● The characteristics are the values at rated voltage (12 V or 24 V), and normal temperature and humidity.
3.8
1.32 47 74 0.30 40 3900 24 12-27.6 160 340 PUDC24H4 PUDC24H4R ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
3.2 48 24-55.2 70 PUDC48H4 characteristics (At rated voltage) ● Lead wire type Lead wire spec. AWG24 UL1007
□80×15 (□3.2"×0.6") [By double chamber method] Color (+) Red
12 7.2-13.8 160 520 PUDC12Z4 PUDC12Z4R ( - ) Black
2.4 (Pa)
Max. airflow: 0.91 m3/min 60
1.2 42 59 0.24 35 3500 24 12-27.6 100 200 PUDC24Z4 PUDC24Z4R Max. static pressure: 29.4 Pa □80 (3.15 sq.)
+1
15 (0.59
0
+0.04
0 )
Static pressure
(0.14)
□80×25 (□3.2"×1.0") 12 7.2-13.8 140 320 PUDC12B4 PUDC12B4R
1.5 -20 ∼ +70 Fan model code
Max. airflow: 1.58 m3/min 0.94 33 38 0.15 30 2800 24 12-27.6 70 180 PUDC24B4 PUDC24B4R 300 +30
0
20
Max. static pressure: 100 Pa (12 +1.2
0 )
Mass: 85 g 1.8 48 24-55.2 40 PUDC48B4 D0815C12B7AZ-00
12 8.4-13.8 80 180 PUDC12D4 PUDC12D4R D0815C24B7AZ-00 0
0.73 26 25 0.10 23 2150 1 0 0.4 0.8 1.2
Silent
Silent
4-φ 4.3±0.3
Fan model code 24 14.4-27.6 40 PUDC24D4 PUDC24D4R Airflow (m3/mi
n) Rotation (4-0.18 dia.) Airflow
● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
PUDC12B4
PUDC12B4P
● The characteristics are the values at rated voltage (12 V, 24 V or 48 V), and normal temperature and humidity. ■ Standard specification
●Venturi shape DC Axial Fan
PUDC12B4R ■ General specification Max. Airflow Max. Static Pressure Noise Speed Input Voltage spec. V Current mA Operating Temp.
PUDC12B4RP
PUDC12B4RS
Venturi: ABS and PBT synthetic resins D0820C m3/min CFM Pa inH2O dB min−1 W
2.52
Rating Operating Range Rating Starting
12 10.2-13.8 210
Model Code
280 D0820C12B7AZ-00
Range ℃
Materials Used Propeller: ABS and PBT synthetic resins 0.84 30 29.4 0.12 31 2900 -10 ∼ +60
PUDC12B4S 2.88 24 20.4-27.6 120 150 D0820C24B7AZ-00
Bearing: Both side shielded ball bearing
PUDC12D4
DC fans
DC fans
● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
Axial
Axial
PUDC12D4R Brushless DC motor, Protection type: Current shut ● The characteristics are the values at rated voltage (12 V or 24 V), and normal temperature and humidity.
Motor
off by detecting lock state, automatically reset
PUDC12D4RS ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
PUDC12D4S
PUDC12H4
Common Elec. Spec. See pages G-11, G-12, G-13. Open flange Ribbed flange characteristics (At rated voltage) ● Lead wire type Lead wire spec. AWG24 UL1007
Standard Carton 120 to a carton of (450 x 380 x 300) mm, mass 10 kg Use ribbed venturi with a reinforced corner when the venturi is [By double chamber method] Color (+) Red
PUDC12H4P mounted with screws. (The spacer is indicated in the model □80×20 (□3.2"×0.8") (Pa)
( - ) Black
PUDC12H4R code by the letter 'R'.) Max. airflow: 0.84 m3/min 40 □80 (3.15 sq.) 20-10 (0.787 -0.04
0
)
Max. static pressure: 29.4 Pa
PUDC12H4RP ■ Standard airflow and static pressure ■ External dimensions in mm (inches) Mass: 100 g 30
□71.5±0.3
(2.815 sq.±0.012)
3.5 3.5
PUDC12H4RS (0.14) (0.14)
characteristics (At rated voltage)
Centrifugal
Centrifugal
● Lead wire type Lead wire spec. AWG24 UL1007 or UL3266
Static pressure
PUDC12H4S Color (+) Red
[By double chamber method] Fan model code 20
PUDC12U7 ( - ) Black (PUDC□D4: Blue)
(Pa) + 0 30
PUDC12U7P 100 □80±1 (3.15 sq.) 300±30 25.5±0.5 D0820C12B7AZ-00 10 300 +1
.2 )
0
PUDC12U7R PUDC...U7
□71.5±0.3 (11.8±1.2) (1±0.02) (12
80 PUDC...H4
D0820C24B7AZ-00
(2.815 sq.±0.012) 4 4 0
PUDC12U7RP (0.16) (0.16)
PUDC...Z4 0 0.4 0.8
Static pressure
PUDC12U7RS 60
4-φ 4.3±0.3
Airflow (m3/mi
n) Rotation Airflow
PUDC...B4 (4-0.17)
PUDC12U7S
40 PUDC...D4
PUDC12Z4 DC Axial Fan
PUDC12Z4P 20
■ Standard specification
D0832C Max. Airflow Max. Static Pressure Noise Speed Input Voltage spec. V Current mA Operating Temp.
Silent
Silent
PUDC12Z4R
0 Model Code
PUDC12Z4RP 0 0.4 0.8 1.2 1.6 m3/min CFM Pa inH2O dB min−1 W Rating Operating Range Rating Starting Range ℃
8-φ 4.5±0.3
PUDC12Z4RS Airflow (m3/mi
n) Rotation (8-0.18 dia.) Airflow 1.92 12 10.2-13.8 160 630 D0832C12B7AZ-00
1.05 37 43 0.17 33 3150
PUDC12Z4S 2.16 24 20.4-27.6 90 300 D0832C24B7AZ-00 -10∼+60
■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches)
PUDC24B4 1.1 39 51 0.21 35 3350 2.88 48 43-53 90 190 D0832C48B7AZ-00
PUDC24B4R
Power source (+): Red [Recommendation] ● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
PUDC24B4RS □ 77 (3.03 sq.) Options (sold separately) ● The characteristics are the values at rated voltage (12 V, 24 V or 48 V), and normal temperature and humidity.
Sensor output: Yellow
□ 71.5 (2.815 sq.)
PUDC24B4S ・Guard: F80UL guard ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
・Filter: F80 filter
PUDC24D4
□80×32 (□3.2"×1.3") characteristics (At rated voltage)
AC fans
AC fans
● Lead wire type Lead wire spec. AWG24 UL1007
Axial
Axial
PUDC24D4R 87 a .)
Color (+) Red
When sensor is installed φ di Max. airflow: 1.1 m3/min [By double chamber method]
3
PUDC24D4RS .4 Max. static pressure: 51 Pa ( - ) Black
(3 (Pa)
Power source (-): Black or blue Mass: 150 g 80 □80 (3.15 sq.) 32±0.5 (1.25±0.02)
PUDC24D4S
□71.5±0.3 4 4
PUDC24H4 D0832C48B7 (2.815 sq.±0.012) (0.16) (0.16)
60
PUDC24H4R 4-φ 4.5 Identical for the intake Fan model code D0832C12B7
Static pressure
(4-0.18 dia.) and outlet sides D0832C24B7
PUDC24H4RS D0832C12B7AZ-00 40
PUDC24H4S DC axial fan with sensor D0832C24B7AZ-00 300
+30
0
PUDC24U7 20 (12)
Centrifugal
Centrifugal
Rated Vol. Model Code D0832C48B7AZ-00
PUDC24U7R
PUDC12D4S PUDC12B4S PUDC12Z4S PUDC12H4S PUDC12U7S 0
PUDC24Z4 0 0.4 0.8 1.2 4-φ 4.3±0.3 (4-0.17)
PUDC12D4RS PUDC12B4RS PUDC12Z4RS PUDC12H4RS PUDC12U7RS
PUDC24Z4P 12 V Airflow (m3/mi
n) Rotation Airflow
PUDC12B4P PUDC12Z4P PUDC12H4P PUDC12U7P
PUDC24Z4R PUDC12B4RP PUDC12Z4RP PUDC12H4RP PUDC12U7RP
PUDC24Z4RS PUDC24D4S PUDC24B4S PUDC24Z4Q PUDC24H4S
Common to D0815C/D0820C/D0832C Series
PUDC24Z4S PUDC24D4RS PUDC24B4RS PUDC24Z4S PUDC24H4RS ■ Wiring connection ■ Mounting hole dimensions in mm (inches) [Recommendation]
24 V
PUDC48B4 PUDC24Z4RS diagram ● D0815C series ● D0820C series ● D0832C series
PUDC48B4P PUDC24Z4P □ 77 (3.03 sq.) □78 (3.07 sq.) □78 (3.07 sq.) □78 (3.07 sq.) □78 (3.07 sq.)
□ 71.5 □71.5 □71.5
PUDC48H4 PUDC48B4P PUDC48Z4S PUDC48H4P (2.815 sq.)
□71.5 □71.5
48 V Power source (+): Red
(2.81 sq.) (2.81 sq.) (2.81 sq.) (2.81 sq.)
Options
Options
PUDC48H4P PUDC48Z4P
87 ).) a.
) .)
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed aia. di aia) ).)
φ ddi ddi aia.
PUDC48Z4 33..
5522 .4
6 52 ddi
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage. (3 3. 3311
Power source (-): Black ..55(( .55( ((33..
PUDC48Z4P 8899 88 9
889
.
8844
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586 4-φ 4.5 φφ 4-φ 4.5
φ
4-φ 4.5 φφ 4-φ 4.5 φφ 4-φ 4.5
PUDC48Z4S ● Customized fans with sleeve bearings are also available depending on the intended purchase quantity. Contact Japan Servo for further information. (4-0.18 dia.) (4-0.18 dia.) (4-0.18 dia.) (4-0.18 dia.) (4-0.18 dia.)
● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp). Identical for the intake Outlet side Intake side Outlet side Intake side
and outlet sides
Silent
Fan model code ● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification. Fan model code Common Elec. Spec. See pages G-11, G-12, G-13.
KUDC12B4 ● The characteristics are the values at rated voltage (12 V, 24 V, or 48 V), and normal temperature and humidity.
D0925C12B4AZ-00
KUDC12B4P ● The life expectancy of KUDC-U speed products at rated voltage and in continuous operation is 30,000 hours at 60 ℃. (40,000 hours for other products)
D0925C12B6AZ-00
KUDC12B4S
■ General specification ●Venturi shape D0925C12B8AZ-00 ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
KUDC12B4V Spacer
KUDC12B4VS Venturi: ABS and PBT synthetic resins characteristics (At rated voltage) ● Lead wire type
Materials Used Propeller: ABS and PBT synthetic resins ■ Features [By double chamber method]
KUDC12D4 300 30 □92 (3.62 sq.) 25 ±0.5
DC fans
(from KUDC fan) dB 80
Brushless DC motor, Protection type: Current shut
Axial
Axial
KUDC12D4V Motor
KUDC12D4VP off by detecting lock state, automatically reset ・ Energy saving % D0925C...B8
Static pressure
KUDC12H7 ・ Motor vibration 60
Common Elec. Spec. See pages G-11, G-12, G-13. Open flange Flange with spacer D0925C...B6
KUDC12H7P Standard Carton 70 to a carton of (450 x 380 x 300) mm, mass 7 kg Use the reinforced product with spacer when the venturi is mounted with ・ High airflow rate (Plan
KUDC12H7S target m3/min or less) 40 D0925C...B4
screws. (The spacer is indicated in the model code by the letter 'V'.)
KUDC12H7V ・ Sensor (lock, pulse) can
KUDC12U7
■ Standard airflow and static pressure ■ External dimensions in mm (inches) be installed 20
characteristics (At rated voltage) ● Lead wire type Lead wire spec. AWG24 UL1007 or UL3266
・ Variable speed (PWM,
Centrifugal
Centrifugal
KUDC12U7P Color (+) Red
[By double chamber method] voltage, resistance)
Airflow
KUDC12U7S ( - ) Black (KUDC□D4: Blue) 0 0.5 1.0 1.5 2.0 2.5 Rotation 4-φ4.5
(4-0.18 dia.)
(Pa) available
KUDC12U7V 80 25.5±0.5 (m3/mi
Airflow (m n)
□92 (3.62 sq.) 300±30 Lead wire spec. AWG24 UL3266
KUDC12U7VP KUDC...U7 □82.5±0.3 (1.0±0.02)
(11.8±1.2) Color (+) Red
KUDC...H7 (3.248 sq.±0.012) 4 4 ( - ) Black
KUDC12U7VS 60
Static pressure
(0.16) (0.16)
KUDC...Z7
KUDC12Z7
KUDC12Z7P 40 KUDC...B4 ■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches)
KUDC12Z7S KUDC...D4 [Recommendation]
20
KUDC12Z7V □89 (3.5 sq.)
□82.5
Silent
Silent
KUDC12Z7VP Power source (+): Red Options (sold separately)
0 1 2 4-φ 4.5 (3.248 sq.)
KUDC12Z7VS Rotation Airflow ・Guard: F92UL guard
Airflow (m3/mi
n) (4-0.18 dia.)
Ensure the guard is situated more than
KUDC24B4
10 mm from the fan to minimize noise
KUDC24B4P ■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches) Power source (-): Black
4 )
10 ia. increase when mounting a guard on
φ 1d
KUDC24B4S Power source (+): Red [Recommendation] ( 4 . the intake side. See page G-9.
KUDC24B4V □89 (3.5 sq.) Options (sold separately) ・Filter: F92 filter
KUDC24D4 Sensor output: Yellow □82.5 ・Guard: F92UL guard
(3.248 sq.)
KUDC24D4S ・Filter: F92 filter
4-φ 4.5
AC fans
AC fans
KUDC24D4V ・Spacer: Flange spacer PUDC (4-0.18 dia.)
Axial
4 )
Axial
10 ia. Identical for the intake
KUDC24H7 φ 1d
When sensor is installed 4 . and outlet sides
(
KUDC24H7P
KUDC24H7S Power source (-): Black or blue
KUDC24H7V
4-φ 4.5 Identical for the intake
KUDC24H7VS (4-0.18 dia.) and outlet sides
KUDC24U7
KUDC24U7V
DC axial fan with sensor Product debut scheduled for spring of 2007
Centrifugal
Centrifugal
KUDC24Z7 Rated Vol. Model Code
KUDC24Z7P KUDC12D4S KUDC12B4S KUDC12Z7S KUDC12H7S KUDC12U7S ● Box-type silent axial fans with an innovative concept (design focusing on sound quality after
KUDC24Z7S 12 V
KUDC12B4VS KUDC12Z7VS KUDC12U7VS embedding in equipment); optimizing all components by fully utilizing know-how in
KUDC24Z7V
KUDC12B4P KUDC12Z7P KUDC12H7P KUDC12U7P computational fluid dynamics (CFD).
KUDC12D4VP KUDC12Z7VP KUDC12U7VP
KUDC24Z7VS
● "Low Vibration Super Silent Fan" with a wide silent range, best fitting all applications and
KUDC24D4S KUDC24B4S KUDC24Z7S KUDC24H7S
KUDC48B4 24 V KUDC24Z7VS KUDC24H7VS
enhances the high added value of embedded equipment.
KUDC48B4P KUDC24B4P KUDC24Z7P KUDC24H7P
KUDC48B4S KUDC48B4S ● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
48 V KUDC48B4VS specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
Options
Options
KUDC48B4VS ● Tentative values are listed in this edition of the catalog. More products will be added to the series as they are prototyped. Contact Japan Servo for
KUDC48B4P KUDC48Z7P
KUDC48Z7 further information.
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
KUDC48Z7P
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
Silent
Fan model code Bearing: Both side shielded ball bearing
Bearing: Both side shielded ball bearing
KLDC12B4
Fan model code Brushless DC motor, Protection type: Current shut
KLDC12B4F Brushless DC motor, Protection type: Current shut Motor
Motor off by detecting lock state, automatically reset
off by detecting lock state, automatically reset Open flange Ribbed flange
KLDC12B4P CUDC12B7
Common Elec. Spec. See pages G-11, G-12, G-13. Common Elec. Spec. See pages G-11, G-12, G-13. Use ribbed venturi with a reinforced corner when the
KLDC12B4S Open flange Ribbed flange CUDC12B7P
Standard Carton 60 to a carton of (450 x 380 x 220) mm, mass 9 kg Standard Carton 60 to a carton of (450 x 380 x 300) mm, mass 12 kg venturi is mounted with screws. (The spacer is
KLDC12U7 Specify no suffix symbol in your ordering CUDC12B7R indicated in the model code by the letter 'R'.)
KLDC12U7P information when the venturi is mounted with CUDC12B7RP
screws. Suffix 'F' for an open flange venturi.
DC fans
DC fans
CUDC12B7RS
Axial
Axial
KLDC12Z7 ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
KLDC12Z7F ■ Standard airflow and static pressure ■ External dimensions in mm (inches) CUDC12B7S
characteristics (At rated voltage) ● Lead wire type
KLDC12Z7FP characteristics (At rated voltage) ● Lead wire type Lead wire spec. AWG24 UL1007 or UL3266 CUDC12D4 [By double chamber method]
[By double chamber method] Color (+) Red □120±1 (4.72 sq.) 300±30
CUDC12D4P 25.5±0.5
KLDC12Z7FS (Pa) ( - ) Black (Pa) □104.8±0.3 (11.8±1.2) (1±0.02)
140 (5) (5)
KLDC12Z7P CUDC12D4Q 140 (4.126 sq.±0.012)
120 CUDC12D4R
KLDC12Z7S □92±1 (3.62 sq.) 300±30 32±0.5 120
100 □82.5±0.3 (11.8±1.2) (1.26±0.02) CUDC12D4RQ CUDC...H7
KLDC24B4
Static pressure
Centrifugal
Centrifugal
100
Static pressure
CUDC24B7R
Silent
Silent
KLDC24Z7FP
■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches) CUDC24B7RS
■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches)
KLDC24Z7FS
[Recommendation] CUDC24B7S
[Recommendation]
KLDC24Z7P Power source (+): Red
Power source (+): Red Options (sold separately) □116 (4.61 sq.) Options (sold separately)
KLDC24Z7S □89 (3.5 sq.) CUDC24D4
・Guard: F92UL guard □104.8 (4.126 sq.) ・Guard: F120UL guard
□82.5
・Filter: F92 filter CUDC24D4Q Sensor output: Yellow ・Filter: F120 filter
Sensor output: Yellow (3.248 sq.)
CUDC24D4R 8 )
12 .
4 ) CUDC24D4RQ φ dia
10 ia. 5 .04
(
φ 1d
AC fans
AC fans
. CUDC24D4RS When sensor is installed
When sensor is installed
Axial
Axial
(4
CUDC24D4S Power source (-): Black or blue
Power source (-): Black
CUDC24D4SQ
4-φ 4.5
4-φ 4.5
CUDC24H7 Identical for the intake (4-0.18 dia.)
and outlet sides
Identical for the intake (4-0.18 dia.) CUDC24H7P
and outlet sides
CUDC24H7S DC axial fan with sensor
DC axial fan with sensor Rated Voltage Model Code
Centrifugal
Centrifugal
Rated Voltage Model Code CUDC12D4S CUDC12B7S CUDC12H7S
KLDC12B4S KLDC12Z7S KLDC12U7P CUDC12D4RS CUDC12B7RS CUDC12H7P
KLDC12B4P KLDC12Z7FS 12 V CUDC12D4P CUDC12B7P
12 V
KLDC12Z7P CUDC12D4Q CUDC12B7RP
KLDC12Z7FP CUDC12D4RQ
KLDC24B4S KLDC24Z7S CUDC24D4S CUDC24B7S CUDC24H7S
KLDC24Z7FS CUDC24B7RS CUDC24H7P
24 V
KLDC24Z7P 24 V CUDC24B7P
KLDC24Z7FP CUDC24D4Q
Options
Options
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
CUDC24D4SQ
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage. ● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586 specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp). ● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
Sensor Spec. G-15 Options G-72, 73, 74 Sensor Spec. G-15 Options G-72, 73, 74
G-30 G-31
Brushless Brushless
DC Fans & Blowers CNDC series □ 120 × 38 mm DC Fans & Blowers D1238T series □ 120 × 38 mm
11.2 12 8.4-13.8 930 2100 CNDC12U7 10.0 12 8.4-13.8 830 1500 D1238T12B7AZ-00
4.4 155 160 0.64 52 3800 4.4 155 160 0.64 50 4000 11.7 24 18.0-27.6 490 1040 D1238T24B7AZ-00
10.8 24 19.2-27.6 450 2000 CNDC24U7
9.1 12 8.4-13.8 760 2080 CNDC12H7 11.0 48 33.6-55.2 230 350 D1238T48B7AZ-00 -20 ∼ +70
4.0 141 140 0.56 51 3550 7.5 12 8.4-13.8 630 1050 D1238T12B6AZ-00
9.4 24 19.2-27.6 390 1970 CNDC24H7 4.0 141 130 0.52 47.5 3600
8.6 12 7.2-13.8 710 2350 CNDC12Z7 8.5 48 33.6-55.2 180 330 D1238T48B6AZ-00
● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
3.5 124 105 0.42 49 3200 9.0 24 12-27.6 370 1200 CNDC24Z7
-20 ∼ +70 ● The characteristics are the values at rated voltage (12 V or 48 V), and normal temperature and humidity.
10.0 48 24-55.2 210 530 CNDC48Z7 CNDC48Z7V
4.6 12 7.2-13.8 380 1330 CNDC12B7
□120×38 (□4.7"×1.5") 2.8 99 70 0.28 40 2650 4.8 24 12-27.6 200 640 CNDC24B7 CNDC24B7V □120×38 (□4.7"×1.5") ■ General specification ●Fan mounting
Max. airflow: 4.4 m3/min Max. airflow: 4.4 m3/min Venturi: ABS and PBT synthetic resins
Max. static pressure: 160 Pa 6 48 24-55.2 120 340 CNDC48B7 Max. static pressure: 160 Pa
M4 nut
Mass: 250 g Mass: 290 g Materials Used Propeller: ABS and PBT synthetic resins M4 nut
2.4 12 8.4-13.8 200 CNDC12D7 CNDC12D7V
2.1 74 44 0.18 32 1950 Bearing: Both side shielded ball bearing Venturi
2.6 24 14.4-27.6 110 CNDC24D7
■ Features
Silent
Silent
Fan model code Brushless DC motor, Protection type: Overcurrent
● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
・ Power saving Motor
CNDC12B7 ● The characteristics are the values at rated voltage (12 V, 24 V or 48 V), and normal temperature and humidity.
detection and automatic resetting by current limiting User panel
or guard
● The life expectancy of CNCD-Z speed products at rated voltage and in continuous operation is 30,000 hours at 60℃. (40,000 hours for other products) ・ Low noise Common Elec. Spec. See pages G-11, G-12, G-13.
CNDC12B7P Nut pocket
・ High airflow models,
CNDC12B7S M4 nut pockets (2 each) provided in 4 places for
●Venturi shape
CNDC12D7
■ General specification Spacer
featuring an aerodynamic
easy mounting. (The customer is to provide nuts)
design inheriting the
CNDC12D7P Venturi: ABS and PBT synthetic resins design concept of Silent Front guard can be mounted easily.
CNDC12D7S With Spacer Propeller: ABS and PBT synthetic resins Fans and incorporating a ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
Bearing: Both side shielded ball bearing newly developed high-
DC fans
DC fans
CNDC12D7V characteristics (At rated voltage) ● Lead wire type
Axial
Axial
efficiency motor. 38.5±0.5
Brushless DC motor, Protection type: Current shut [By double chamber method] 300±30 □119±1 (4.72 sq.) (1.5±0.02)
CNDC12H7 Motor ・ Interchangeable with
off by detecting lock state, automatically reset (Pa) (11.8±1.2) □104.8±0.3 (5) (5)
Open flange Flange with spacer
CNDC12U7 currently installed box fans. 160 (4.126 sq.±0.012)
Common Elec. Spec. See pages G-11, G-12, G-13. Use the reinforced product with spacer when the venturi is
CNDC12Z7 mounted with screws. (The spacer is indicated in the model 140
Standard Carton 40 to a carton of (450 x 380 x 300) mm, mass 12 kg Fan model code 19)
CNDC12Z7P code by the letter 'V'.) (φ1
120
Static pressure
D1238T12B6AZ-00 D1238T...B7
CNDC12Z7S ■ Standard airflow and static pressure ■ External dimensions in mm (inches) D1238T12B7AZ-00 100
CNDC12Z7VS characteristics (At rated voltage) D1238T...B6
Centrifugal
Centrifugal
● Lead wire type Lead wire spec. AWG24 UL1007 or UL3266 80
Color (+) Red D1238T24B7AP-00
CNDC24B7 [By double chamber method]
( - ) Black (CNDC□D7: Blue) D1238T24B7AS-00 60
CNDC24B7P (Pa)
160 D1238T24B7AZ-00
38.5±0.5 40
CNDC24B7Q CNDC...U7 □120±1 (4.72 sq.) 300±30 4-φ 4.5±0.3
(1.5±0.02)
140 □104.8±0.3 (11.8±1.2) D1238T48B6AP-00 20 (4-0.18 dia.) Rotation Airflow
CNDC24B7S CNDC...H7 (4.126 sq.±0.012) 5 5
120 (0.20) (0.20) D1238T48B6AS-00 Lead wire spec. AWG24 UL1007 or UL3266
CNDC24B7SQ 0
Static pressure
Silent
60
CNDC24D7P 40
D1238T48B7AZ-00 [Recommendation]
Power source (+): Red □116 (4.61 sq.)
CNDC24D7Q Options (sold separately)
20
CNDC24D7S 8-φ 4.5±0.3 □104.8 (4.126 sq.) ・Guard: F120UL guard
0 Rotation (8-0.18 dia.) Airflow Sensor output: Yellow Ensure the guard is situated more than
CNDC24D7VS 0 1 2 3 4 10 mm from the fan to minimize noise
Airflow (m3/mi
n) increase when mounting a guard on
CNDC24H7 12
8 )
. the intake side. See page G-9.
CNDC24U7
■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches) φ dia
.04
When sensor is installed ・Filter: F120 filter
[Recommendation] ( 5
AC fans
AC fans
CNDC24Z7 Power source (+): Red
Axial
Axial
□116 (4.61 sq.) Power source (-): Black
CNDC24Z7P □104.8 (4.126 sq.) Options (sold separately)
Sensor output: Yellow
CNDC24Z7Q ・Guard: F120UL guard
・Filter: F120 filter 4-φ 4.5 (4-0.18 dia.)
CNDC24Z7S 4
13 a.) ・Spacer: Flange spacer CNDC
φ 8 di Outlet side
CNDC48B7 When sensor is installed ( 5 .2
CNDC48B7P
Power source (-): Black or blue
CNDC48B7S 4-φ 4.5 Silent, low vibration and energy saving fans with a max. airflow of 2.8 m3/min can be customized
Centrifugal
Centrifugal
(4-0.18 dia.) Identical for the intake
CNDC48Z7 and outlet sides (variable speed available only for 12 V specification). Contact Japan Servo for further information.
CNDC48Z7P DC axial fan with sensor
CNDC48Z7S ● Japan Servo can meet many of your requirements for customization,
Rated Vol. Model Code DC axial fan with sensor
such as special connectors, other sensors not listed above, variable
CNDC48Z7V CNDC12D7S CNDC12B7S CNDC12Z7S speed specifications, and other modifications. Please contact Japan ● Japan Servo can meet many of your requirements for customization, such as special
12 V CNDC12D7P CNDC12B7P CNDC12Z7VS
Rated Vol. Model Code
Servo during your product planning and development stage. connectors, other sensors not listed above, variable speed specifications, and other
CNDC12Z7P ● The listed products are registered in the following overseas standards D1238T12B6AS-00 D1238T12B7AS-00 modifications. Please contact Japan Servo during your product planning and
12 V
CNDC24B7S CNDC24Z7S files, UL: E48889, CSA: LR49399, TUV: R9451586 D1238T12B6AP-00 D1238T12B7AP-00 development stage.
● An electronic version of the Japan Servo catalog can be forwarded upon D1238T24B7AS-00 ● The listed products are registered in the following overseas standards files, UL:
CNDC24D7S CNDC24B7VS 24 V
request. 3D data is also available at our web2-CAD site E48889, CSA: LR49399, TUV: R9451586
D1238T24B7AP-00
Options
Options
24 V CNDC24D7VS CNDC24B7P (www.web2cad.co.jp). ● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D
CNDC24D7P CNDC24B7Q CNDC24Z7P D1238T48B6AS-00 D1238T48B7AS-00 data is also available at our web2-CAD site (www.web2cad.co.jp).
48 V
CNDC24D7Q CNDC24B7SQ CNDC24Z7Q D1238T48B6AP-00 D1238T48B7AP-00
CNDC48B7S CNDC48Z7S
48 V
CNDC48B7P CNDC48Z7P
Sensor Spec. G-15 Options G-72, 73, 74 Sensor Spec. G-15 Options G-72, 73, 74
G-32 G-33
Brushless Brushless
DC Fans & Blowers D1238B series □ 120 × 38 mm DC Fans & Blowers D1338B series □ 127 × 38 mm
DC Axial Fan ■ Standard specification DC Axial Fan ■ Standard specification
D1238B Max. Airflow Max. Static Pressure Noise Input Voltage Spec. V Current mA
D1338B Max. Airflow Max. Static Pressure Noise Input Voltage Spec. V Current mA
Fans & Blowers
Silent
Fan model code Fan model code
D1238B12B7AP-00 ■ General specification D1338B12B6AP-00 Venturi: Aluminum alloy die castings
Materials Used Propeller: ABS and PBT synthetic resins
D1238B12B7AS-00 Venturi: Aluminum alloy die castings D1338B12B6AS-00
Bearing: Both side shielded ball bearing
D1238B12B7AZ-00 Materials Used Propeller: ABS and PBT synthetic resins D1338B12B6AZ-00
Bearing: Both side shielded ball bearing Brushless DC motor, Protection type: Overcurrent
D1238B12B8AP-00 D1338B12B7AP-00 Motor
detection and automatic resetting by current limiting
D1238B12B8AS-00 Brushless DC motor, Protection type: Overcurrent D1338B12B7AS-00
Motor
detection and automatic resetting by current limiting Common Elec. Spec. See pages G-11, G-12, G-13.
D1238B12B8AZ-00 D1338B12B7AZ-00
DC fans
DC fans
Common Elec. Spec. See pages G-11, G-12, G-13.
D1238B12B9AP-00 D1338B12B8AP-00
Axial
Axial
■ Standard airflow and static pressure ■ External dimensions in mm (inches)
D1238B12B9AS-00 ■ Standard airflow and static pressure ■ External dimensions in mm (inches) D1338B12B8AS-00
characteristics (At rated voltage) ● Lead wire type
D1238B12B9AZ-00 characteristics (At rated voltage) ● Lead wire type D1338B12B8AZ-00 [By double chamber method] □127±1 (5.0 sq.) 38.5±0.5
300±30
D1238B24B7AP-00 [By double chamber method] 38.5±0.3 D1338B24B6AP-00 (Pa) (1.5±0.02)
□119±1 (4.72 sq.) 300±30 □113.3±0.3 (11.8±1.2)
(1.5±0.01)
(Pa) (11.8±1.2) (4.461 sq.±0.012) 4 4
D1238B24B7AS-00 □104.8±0.3
4 4
D1338B24B6AS-00 200
300 (4.126 sq.±0.012) (0.16) (0.16)
D1238B24B7AZ-00 (0.16) (0.16)
D1338B24B6AZ-00 D1338B...B8
160
Static pressure
D1238B24B8AP-00 250 D1338B24B7AP-00 D1338B...B7
Centrifugal
Centrifugal
D1238B...BA
D1238B24B8AS-00 D1338B24B7AS-00 120 D1338B...B6
Static pressure
200 D1238B...B9
D1238B24B8AZ-00 D1238B...B8 D1338B24B7AZ-00
150 80
D1238B24B9AP-00 D1238B...B7 D1338B24B8AP-00
D1238B24B9AS-00 100 D1338B24B8AS-00 40
8-φ 4.5±0.3 8-φ 4.5
D1238B24B9AZ-00 (8-0.18 dia.) D1338B24B8AZ-00 0 Rotation (8-0.18 dia.) Airflow
50 Rotation Airflow
D1238B48B7AP-00 D1338B48B6AP-00 0 1 2 3 4 5 6 Lead wire spec. AWG24 UL1007 or UL3266
0 Lead wire spec. AWG24 UL1007 or UL3266 Airflow (m3/mi n) Color (+) Red
D1238B48B7AZ-00 0 1 2 3 4 5 6 Color (+) Red D1338B48B6AZ-00 ( - ) Black
Airflow (m3/mi
n) ( - ) Black
D1238B48B8AP-00 D1338B48B7AP-00
Silent
Silent
D1238B48B8AS-00 D1338B48B7AS-00
■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches)
D1238B48B8AZ-00 D1338B48B7AZ-00
Power source (+): Red
[Recommendation] ■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches)
D1238B48B9AP-00 D1338B48B8AP-00
□116 (4.61 sq.)
Options (sold separately)
[Recommendation]
D1238B48B9AS-00 □104.8 (4.126 sq.) D1338B48B8AS-00
Sensor output: Yellow Power source (+): Red
・Guard: F120UL guard □123 (4.84 sq.)
D1238B48B9AZ-00 D1338B48B8AZ-00
・Filter: F120 filter □113.3 (4.461 sq.) Options (sold separately)
D1238B48BAAP-00 28
Sensor output: Yellow
1 .) ・Guard: F127UL guard
φ dia
AC fans
AC fans
D1238B48BAAS-00 .04
Axial
Axial
When sensor is installed (5
D1238B48BAAZ-00 9 )
13 .
Power source (-): Black φ dia
When sensor is installed .47
(5
Centrifugal
DC axial fan with sensor DC axial fan with sensor
Rated Vol. Model Code
Rated Vol. Model Code
D1338B12B6AS-00 D1338B12B7AS-00 D1338B12B8AS-00
D1238B12B7AS-00 D1238B12B8AS-00 D1238B12B9AS-00 12 V
12 V D1338B12B6AP-00 D1338B12B7AP-00 D1338B12B8AP-00
D1238B12B7AP-00 D1238B12B8AP-00 D1238B12B9AP-00
D1338B24B6AS-00 D1338B24B7AS-00 D1338B24B8AS-00
D1238B24B7AS-00 D1238B24B8AS-00 D1238B24B9AS-00 24 V
24 V D1338B24B6AP-00 D1338B24B7AP-00 D1338B24B8AP-00
D1238B24B7AP-00 D1238B24B8AP-00 D1238B24B9AP-00
D1338B48B7AS-00 D1338B48B8AS-00
D1238B48B8AS-00 D1238B48B9AS-00 D1238B48BAAS-00 48 V
48 V D1338B48B6AP-00 D1338B48B7AP-00 D1338B48B8AP-00
D1238B48B7AP-00 D1238B48B8AP-00 D1238B48B9AP-00 D1238B48BAAP-00
Options
Options
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
Sensor Spec. G-15 Options G-72, 73, 74 Sensor Spec. G-15 Options G-72, 73, 74
G-34 G-35
Brushless Brushless
DC Fans & Blowers D1338S series □ 127 × 38 mm DC Fans & Blowers D1725M series φ172 × 147 × 25 mm
DC Axial Fan ■ Standard specification DC Axial Fan ■ Standard specification
D1338S Max. Airflow Max. Static Pressure Noise Input Voltage Spec. V Current mA
DC TUBEAXIAL FAN Max. Airflow Max. Static Pressure Noise Input Voltage Spec. V Current mA
Fans & Blowers
■ General specification
■ Standard airflow and static pressure
Venturi: Aluminum alloy die castings
Materials Used Propelle: ABS and PBT synthetic resins
characteristics (At rated voltage)
[By double chamber method]
Bearing: Both side shielded ball bearing φ172×147×25
□127×38 (□5.0"×1.5") (φ6.8"×6.0"×1.0")
(Pa)
Max. airflow: 5.1 m3/min Brushless DC motor, Protection type: Overcurrent 240
Max. static pressure: 185 Pa Motor Max. airflow: 6.4 m /min
3
detection and automatic resetting by current limiting Max. static pressure: 135 Pa
Mass: 495 g 200 D1725M12B5
Common Elec. Spec. See pages G-11, G-12, G-13. Mass: 500 g
Static pressure
D1725M24B7
Fan model code
Silent
Silent
Fan model code 160 D1725M48B7
D1725M12B5AZ-00
D1338S48B7AP-00 ■ Standard airflow and static pressure ■ External dimensions in mm (inches) D1725M24B7AZ-00
120
D1338S48B7AS-00 characteristics (At rated voltage) ● Lead wire type
D1725M48B7AZ-00
D1338S48B7AZ-00 [By double chamber method] 80
(Pa) 38.5±0.5
300±30 □127±1 (5.0 sq.) 40
200 (11.8±1.2)
(1.5±0.02)
□113.3±0.3
5
(4.461 sq.±0.012)
160 (0.20) 0
Static pressure
DC fans
DC fans
0 2 4 6 8
Axial
Axial
D1338S...B7 ±1 Airflow (m3/mi
n)
120 127
φ
80
■ External dimensions in mm (inches) ■ Mounting hole dimensions in mm (inches)
40 ● Lead wire type [Recommendation]
0 8-φ 4.5±0.3 147 (5.79)
0 1 2 3 4 5 6 (8-0.18 dia.)
Airflow (m3/mi
n)
Centrifugal
Centrifugal
+50
4-φ 4.3±0.3 4-φ 11.5±0.5 300 0
(4-0.17 dia.) (12 +20 )
.6 68
)
a.
φ 172 (6.77 dia.)
(6 φ 1
di
1
Lead wire spec. AWG24 UL1007 or UL3266 φ
φ116622
Color (+) Red (6
(6.3
.388ddia
ia.).)
( - ) Black
4-φ 4.5
R5 (4-0.18 dia.)
■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches)
[Recommendation]
Silent
Silent
Power source (+): Red 7.5 7.5 110°
□123 (4.84 sq.)
110゚ (0.3) (0.3)
□113.3 (4.461 sq.) Identical for the intake
Sensor output: Yellow Options (sold separately) 25.4±0.5 and outlet sides
147 (5.79)
・Guard: F127UL guard (1±0.02)
Rotation Airflow
9
13 a.)
When sensor is installed φ 7 di
.4 Lead wire spec. AWG24 UL1007
(5
Color (+) Red
Power source (-): Black ( - ) Black (D1725M12B: Blue)
AC fans
AC fans
Axial
Axial
4-φ 4.5(4-0.18 dia.)
Outlet side ■ Wiring connection diagram
Centrifugal
Rated Vol. Model Code
Power source (-): Black or blue
D1338S48B7AS-00
48 V
D1338S48B7AP-00
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
Options
Options
Sensor Spec. G-15 Options G-72, 73, 74
G-36 G-37
Brushless Brushless
DC Fans & Blowers MADC series φ172 × 150 × 51 mm DC Fans & Blowers PADC series φ172 × 51 mm
DC Axial Fan ■ Standard specification DC Axial Fan ■ Standard specification
DC MAXI III DC PARKY III
Fans & Blowers
Silent
Fan model code 4.2 148 69 0.28 42 2000 5
24 12-27.6 210 MADC24D4 24 12-27.6 210 PADC24D4
MADC12B4 PADC12B4
● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification. ● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
MADC12D4 ● The characteristics are the values at rated voltage (12 V, 24 V or 48 V), and normal temperature and humidity. PADC12D4 ● The characteristics are the values at rated voltage (12 V, 24 V or 48 V), and normal temperature and humidity.
MADC12H7 PADC12H7
■ General specification PADC12Z4
■ General specification
MADC12H7P
MADC12H7S Venturi: Aluminum alloy die castings PADC12Z4P Venturi: Aluminum alloy die castings
Materials Used Propeller: ABS and PBT synthetic resins Materials Used Propeller: ABS and PBT synthetic resins
MADC12Z4 PADC24B4
Bearing: Both side shielded ball bearing Bearing: Both side shielded ball bearing
DC fans
DC fans
PADC24B4P
Axial
Axial
MADC12Z4P
Brushless DC motor, Protection type: Overcurrent Brushless DC motor, Protection type: Overcurrent
MADC24B4 Motor PADC24B4Q Motor
detection and automatic resetting by current limiting detection and automatic resetting by current limiting
MADC24B4P PADC24B4S
Common Elec. Spec. See pages G-11, G-12, G-13. Common Elec. Spec. See pages G-11, G-12, G-13.
MADC24B4Q PADC24D4
Standard Carton 12 to a carton of (450 x 380 x 220) mm, mass 10 kg Standard Carton 12 to a carton of (450 x 380 x 220) mm, mass 10.5 kg
MADC24B4SQ PADC24H7
MADC24D4 ■ Standard airflow and static pressure ■ External dimensions in mm (inches) PADC24H7Q ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
MADC24D4Q characteristics (At rated voltage) ● Lead wire type PADC24Z4 characteristics (At rated voltage) ● Lead wire type
Centrifugal
Centrifugal
[By double chamber method]
8-φ 4.5±0.3 51±0.5 (2±0.02)
PADC24Z4P [By double chamber method] 12-φ 4.5±0.3
MADC24H7 150 (5.91)
(8-0.18 dia.) 7.5 (0.30) 7.5 (0.30) (12-0.18 dia.)
Static pressure
)
MADC24Z4Q 280 MADC...U7 DC Maxi III PADC48B4
Static pressure
240 PADC...H7
240 MADC...H7 PADC48H4
MADC24Z4SQ 200
200 PADC...Z4
MADC48B4 MADC...Z4 PADC48S7 160
160 PADC...B4 7.5 7.5
120
80
PADC48Z4
Silent
Silent
Rotation Airflow
MADC48H4 80
111°
+0.2°
Rotation Airflow 40
Lead wire spec. AWG24 UL1007 or UL3266
MADC48S7 40 PADC...D4
Lead wire spec. AWG24 UL1007 or UL3266
0
2 4 6 8 10
Color (+) Red
MADC...D4 0
MADC48S7S 0
Color (+) Red Airflow (m3/mi
n) ( - ) Black (PADC□D4: Blue)
0 2 4 6 8 10
MADC48S7Q Airflow (m3/mi
( - ) Black (MADC□D4: Blue)
n)
■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches)
MADC48U7 [Recommendation]
■ Wiring connection diagram ■ Mounting hole dimensions in mm (inches) Power source (+): Red
MADC48Z4 162 (6.38)
[Recommendation] Sensor output: Yellow
MADC48Z4P Power source (+): Red
146 (5.75) 146 (5.75)
AC fans
AC fans
MADC48Z4SQ
: φ ia.)
Axial
Axial
)
0)
ia.
ide 4 d
Sensor output: Yellow
16
4d
))
e s .5
600
162 (6.378)
tak (6
Options
116
6 ( 60)
(In 166
φ 16
φ
) 16 1 2 (6.3
ia.).
sid .)
φ
78)
e:
φ (φ
ke ia
ta 4 d
5544 φ
66.. 600)) φ11662
(In .5
(
( 2
(6
8) 3-φ 4.5
φφ (φ
φ
(3-0.18 dia.)
R5
3-φ 4.5
Power source (-): Black or blue R5 (3-0.18 dia.) The PADC series is being revised to the 4-R5
2-R5
D1751S series in the near future. 4-φ 4.5 (4-0.18 dia.) 111°
2-φ 4.5 (2-0.18 dia.) 111°
(4 point mounting) (3 point mounting)
(2 point mounting) (3 point mounting)
The new series of fans feature a max. airflow of 14 m3/min and a noise
Centrifugal
Centrifugal
reduction of 3 dB. Please contact Japan Servo for more information.
Options (sold separately)
DC axial fan with sensor ・Guard: GUARD172
Rated Vol. Model Code
MADC12Z4P MADC12H7S DC axial fan with sensor
12 V
MADC12H7P
Rated Vol. Model Code
MADC24B4P MADC24Z4P
12 V PADC12Z4P
24 V MADC24D4Q MADC24B4Q MADC24Z4Q
PADC24B4S PADC24Z4S PADC24H7Q
MADC24B4SQ MADC24Z4SQ
24 V PADC24B4P PADC24Z4P
MADC48B4P MADC48Z4P MADC48S7S
48 V PADC24B4Q PADC24Z4Q
Options
Options
MADC48Z4SQ MADC48S7Q
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed ● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage. specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586 ● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp). ● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
Sensor Spec. G-15 Options G-72, 73, 74 Sensor Spec. G-15 Options G-72, 73, 74
G-38 G-39
Brushless Brushless
DC Fans & Blowers G0938 Series □ 92 × 38 mm DC Fans & Blowers G1238 Series □ 120 × 38 mm
3.9 138 490 1.97 63 7500 24 16.8-26.4 1300 2700 G0938B24BAZP-00 7.4 261 520 2.09 67 6300 24 16.8-27.6 2200 3100 G1238B24BBZP-00 -20 ∼ +60
48 36-52.8 610 1360 G0938B48BAZP-00 48 36-55.2 1100 1600 G1238B48BBZP-00
-20 ∼ +60
12 8.4-13.8 2000 4600 G0938B12B9ZP-00 24 16.8-27.6 1300 2000 G1238B24BAZP-00
6.3 223 415 1.67 64 5300 -20 ∼ +70
3.6 127 440 1.77 61 7000 24 16.8-27.6 1000 2600 G0938B24B9ZP-00 48 36-55.2 660 970 G1238B48BAZP-00
48 36-55.2 520 1100 G0938B48B9ZP-00
■ Standard airflow and static pressure ■ External dimensions in mm (inches) ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
□92×38 (□3.62"×1.5") characteristics (At rated voltage) ● Lead wire type □120×38 (□4.75"×1.5") characteristics (At rated voltage) ● Lead wire type
Max. airflow:3.9 m3/min Max. airflow:7.4 m3/min
Max. static pressure:490 Pa Max. static pressure:520 Pa
Mass:320 g Mass:480 g
Silent
Fan model code
G0938B12BAZP-00 G1238B12BBZP-00
G0938B24BAZP-00 G1238B24BBZP-00
G0938B48BAZP-00 G1238B48BBZP-00
G0938B12B9ZP-00 G1238B24BAZP-00
G0938B24B9ZP-00 G1238B48BAZP-00
G0938B48B9ZP-00
DC fans
DC fans
Axial
Axial
■ PWM speed control specification ■ PWM speed control specification
Centrifugal
Centrifugal
Silent
Silent
AC fans
AC fans
Axial
Axial
Centrifugal
Centrifugal
For cooling and/or ventilating in electronic cabinets which have high registance to air flow (system impedance). For cooling and/or ventilating in electronic cabinets which have high registance to air flow (system impedance).
The G0938 is designed using a digital analysis system to maximize cooling efficiency and minimize noise during operation. The G1238 is designed using a digital analysis system to maximize cooling efficiency and minimize noise during operation.
Uniquely formed fixed blades designed by digital engineering: Uniquely formed fixed blades designed by digital engineering:
・Controls spread of air stream. ・Controls spread of air stream.
・When two G0938 fans are stacked, the static pressure is almost doubled. ・When two G1238 fans are stacked, the static pressure is almost doubled.
It is suitable for use in highly reliable/redundant designs; the trend of cooling systems. It is suitable for use in highly reliable/redundant designs; the trend of cooling systems.
Option
Option
● To ensure correct installation and smooth operation please obtain a drawing for approval or reference drawing from ● To ensure correct installation and smooth operation please obtain a drawing for approval or reference drawing from
Japan Servo Co. Japan Servo Co.
Sensor Spec. G-15 Options G-72, 73, 74 Sensor Spec. G-15 Options G-72, 73, 74
G-40 G-41
Brushless Brushless
DC Fans & Blowers G1751M series φ172 × 150 × 51 mm DC Fans & Blowers SADC series φ200 × 70 mm
For a high static pressure region ■ Standard specification DC Axial Fan ■ Standard specification
DC Axial Fan Max. Airflow Max. Static Pressure Speed Input Voltage Spec. V Current mA
Noise Operating
DC SATURN Max. Airflow Max. Static Pressure Noise Input Voltage Spec. V Current mA
Fans & Blowers
G1751M 11.2
10.0
395
353
840
710
3.38 76(8.2m3/min) 6800
2.85 71(7.5m3/min) 6200
120
86
36-50.4 2500 5000 G1751M48B9AZ-00
1800 4400 G1751M48B8AZ-00
-20 ∼ +50 Hi
Lo
10
8.7
353
307
214
189
0.86
0.76
59
55
3200
2800
41
29
24 20.4-27.6
1.7
1.2
SADC24Z5P
3
9.2 325 580 2.33 69(6.7m /min) 5600 62.4 48 1300 4400 G1751M48B7AZ-00 Hi 9 318 201 0.81 55 2900 31 1.3
36-60 -20 ∼ +60 24 20.4-27.6 SADC24X5P
8.3 293 490 1.97 66.5(6.1m3/min) 5100 50 1040 2700 G1751M48B6AZ-00 Lo 7.5 265 153 0.62 51.5 2500 19 0.8
-20 ∼ +70
7.3 258 360 1.45 63(5.3m3/min) 4500 36 750 2550 G1751M48B5AZ-00 1.0
24 20.4-27.6 SADC24B5P
● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification. Hi 7.7 272 158 0.64 53 2600 24 0.65
● The characteristics are the values at rated voltage (48 V), and normal temperature and humidity. Lo 6.2 219 110 0.44 46.5 2100 16 0.5
48 40.8-55.2 SADC48B5P
■ General specification 0.33
φ172×150×51
Venturi: Aluminum alloy die castings
φ200×70 (φ7.8"×2.8") ● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
(φ6.8"×6.0"×2.0") Materials Used Propeller: ABS and PBT synthetic resins
Max. airflow: 10 m3/min ● The characteristics are the values at rated voltage (24 V or 48 V), and normal temperature and humidity.
Max. airflow: 11.2 m3/min (Dual speeds)
Bearing: Both side shielded ball bearing ● The products feature a speed feedback control system and their speeds remain constant, even if the operating voltage is higher than the rated voltage.
Max. static pressure: 840 Pa Max. static pressure: 214 Pa
Mass: 0.82 kg Mass: 1.7 kg
Motor
Brushless DC motor, Protection type: Overcurrent ■ General specification ■ Wiring connection diagram
detection and automatic resetting by current limiting
Silent
Silent
Fan model code Fan model code Red
Venturi: Aluminum alloy die castings +24 VDC
G1751M48B5AP-00 Common Elec. Spec. See pages G-11, G-12, G-13. SADC24B5P
Materials Used Propeller: ABS and PBT synthetic resins Brown
G1751M48B5AZ-00 Standard Carton 12 to a carton of (450 x 380 x 220) mm, mass 11 kg SADC24X5P Bearing: Both side shielded ball bearing Speed change
Fan Sensor output
G1751M48B6AP-00 ■ Standard airflow and static pressure ■ External dimensions in mm (inches) SADC24Z5P Brushless DC motor Dual-speed change and pulse Yellow (Open collector)
output type. A rotation sensor installed.
G1751M48B6AZ-00 characteristics (At rated voltage) ● Lead wire type 51±0.5
SADC24Z5SQ Motor
Protection type: Overcurrent detection and
[By double chamber method] (2±0.02) SADC48B5P GND
G1751M48B7AP-00 [dB (A)] 150 (5.91) automatic resetting by current limiting Black
90 7.5 7.5
G1751M48B7AZ-00 8-φ 4.5±0.3 (8-0.18 dia.) Common Elec. Spec. See pages G-11, G-12, G-13.
(0.3) (0.3)
DC fans
DC fans
300±30 Standard Carton 5 to a carton of (465 x 300 x 290) mm, mass 9 kg Speed Mode Speed control signal
Axial
Axial
G1751M48B8AZ-00 80
(1.18±1.2)
Noise
Centrifugal
200 200 200
800
Static pressure
Static pressure
Static pressure
111゚±2゚
Airflow 160 Hi 160 Hi 160 Hi
700 Rotation
G1751M...B9 120 120 120
Lead wire spec. AWG24 UL3266
Static pressure
600 G1751M...B8
Color (+) Red 80 80 80
( - ) Black Lo
G1751M...B7
500 40 40 Lo 40 Lo
G1751M...B6
400
■ Mounting hole dimensions in mm (inches) 0 0 0
[Recommendation] 0 2 4 6
Airflow (m3/min)
8 10 0 2 4 6
Airflow (m3/min)
8 10 0 2 4 6
Airflow (m3/min)
8 10
300
146 (5.75) 146 (5.75)
■ External dimensions in mm (inches) ■ Mounting hole dimensions in mm
Silent
Silent
200
))
600 (inches) [Recommendation]
116
● Lead wire type
φ
)
100 ia.).
sid .)
e:
ke ia
ddia 0
162 (6.378)
G1751M...B5
ta 4 d
Grounding tap
5544 φ
70 - 1
66.. 600)) φ11662
(In .5
(
( 2 (M4 effective depth 6)
(6
0
0 66 6 (2.76 ) 188.4 (7.4)
1166 (φ11 (6.37 -0.04
166
10 12 8) 7.5±0.3 7.5±0.3
0 2 4 6 8 φφ (φ
φ
φ200 - (7.87dia. )
0
-0.04
4 (φ
AC fans
AC fans
■ Wiring connection diagram (2 point mounting) (3 point mounting) 19
188.4 (7.4)
Axial
Axial
φ
UL1007 AWG22
Power source (+): Red Options (sold separately)
・Guard: GUARD172
0
1
Sensor output: Yellow
New! 4-R5
When sensor is installed The G1751M series has been designed for use in high static 4-φ 4.5
pressure regions, with a quieter and lower input compared 8-φ 4.5±0.3 (8-0.18 dia.) Airflow (4-0.18 dia.)
Centrifugal
Centrifugal
Power source (-): Black 188.4 ±0.33 (7.417±0.013)
with the SADC and MADC series. The MADC series is
recommended for use in a high airflow region. (See Fig. 4 on Options (sold separately)
As of Jan. 2007, higher performance models will soon be released. page G-6.) ・Guard: F200UL guard
Variable speed products (G-58 and G-59) have also been released.
DC axial fan with sensor
DC axial fan with sensor Rated Vol. Model Code
Rated Vol. Model Code 24 V SADC24B5P SADC24X5P SADC24Z5SQ
Option
Option
G1751M48B5AP-00 48 V SADC48B5P
48 V G1751M48B6AP-00 ● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
G1751M48B7AP-00 specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed ● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage. ● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
Sensor Spec. G-15 Options G-72, 73, 74 Sensor Spec. G-15 Options G-72, 73, 74
G-42 G-43
Brushless Brushless
DC Fans & Blowers E0525H/K series □ 48 × 25 mm DC Fans & Blowers E0515H series 51 × 53 × 15 mm
■ Features
Silent
Fan model code Materials Used Impeller: ABS and PBT synthetic resins
・ The smaller 48 mm square Common Elec. Spec. See pages G-11, G-12, G-13. E0515H12B3AZ-00 Bearing: Both side shielded ball bearing
blower gives as much E0515H12B5AZ-00 Brushless DC motor, Protection type: Current shut
airflow output as a larger Motor
70 mm square blower while
■ Standard airflow and static pressure ■ External dimensions in mm (inches) E0515H12B7APA01 off by detecting lock state, automatically reset
maintaining the same low characteristics (At rated voltage) ● Lead wire type (E0525H) E0515H12B7ASA01 Common Elec. Spec. See pages G-11, G-12, G-13.
noise level. [By double chamber method] φ 28 (Intake inside dia.) E0515H12B7AZA01
・ Both clockwise and (1.10 dia. Intake)
2-φ 3.5 (Through hole) E0515H12B8APA01
■ Standard airflow and static pressure ■ External dimensions in mm (inches)
counterclockwise 19.1±0.3 25 characteristics (At rated voltage) ● Lead wire type
DC fans
DC fans
(Pa) Lead wire length 300±30 (2-0.14 dia. HOLES)
E0515H12B8ASA01
Axial
Axial
discharge (mirror-image) (11.8±1.2) (0.752±0.012) (0.98)
300 [By double chamber method]
9.5 9.5
versions are available. E0515H12B8AZA01
250 (0.37) (0.37) Lead wire length 300±30
(Pa) 18±0.3
Static pressure
E0525H/K...B7
(0.677±0.012)
E0515H24B5AZ-00 (11.8±1.2) (0.709±0.012)
17.2±0.3
200 15
Fan model code 280
(0.850±0.012)
E0515H24B7APA01 φ 36 (Intake inside dia.) 2-φ 4.5 (Through hole) (0.59)
21.6±0.3
(1.89)
150 240 E0515H...B8 (1.42 dia. Intake) (2-0.18 dia. HOLES)
48
E0525H12B7AP-00 E0515H24B7ASA01
Static pressure
(0.787±0.012)
100 H Outlet Intake 200 E0515H......B7
20±0.3
E0525H12B7AS-00 E0515H24B7AZA01
160 E0515H...B5
(0.906±0.012)
50
(2.07)
52.6
E0525H12B7AZ-00 E0515H24B8APA01
23±0.3
Centrifugal
Centrifugal
120 E0515H...B3
0
(0.86)
Intake
(1.03)
21.8
19.7±0.3
26.2
E0525H24B7AZ-00 23.7 E0515H24B8ASA01
0 0.05 0.1 0.15 0.2 0.25 0.3 80 Outlet
(0.776±0.012) (0.93)
E0525K12B7AP-00 Airflow (m3/mi
n) 48 E0515H24B8AZA01 40
(1.89) 0
E0525K12B7AS-00
(0.79)
(1.11)
28.2
20±0.3 24.7
20
0 0.02 0.04 0.06 0.08 0.1 0.12 0.14
E0525K12B7AZ-00 Lead wire spec. UL3265 AWG26 Airflow (m3/mi
n) (0.787±0.012) (0.93)
51
E0525K24B7AZ-00 ■ Wiring connection diagram Color (+) Red
( - ) Black (2.01)
Power source (+): Red Lead wire spec. AWG26 or UL3265 AWG26
● Lead wire type (E0525K) Color (+) Red
( - ) Black (CNDC□D4: Blue)
Sensor output: Yellow φ 28 (Intake inside dia.)
■ Wiring connection diagram
Silent
Silent
(1.10 dia.Intake)
2-φ 3.5 (Through hole)
25 19.1 Lead wire length 300±30 Power source (+): Red
(2-0.14 dia. HOLES) (0.752±0.012)
(0.98) (11.8±1.2)
When sensor is installed 9.5 9.5
Sensor output: Yellow
(0.37) (0.37)
(0.677±0.012)
(0.850±0.012)
(1.89)
21.6±0.3
48
AC fans
Power source (-): Black
Axial
Axial
(0.86)
(1.03)
21.8
26.2
23.7 19.7±0.3
(0.93) (0.776±0.012)
48
(1.89)
Centrifugal
Centrifugal
DC centrifugal blower with sensor
Super silent blower with sensor
Rated Vol. Model Code
Rated Vol. Model Code
E0515H12B7ASA01 E0515H12B8ASA01
E0525H12B7AS-00 12 V
E0515H12B7APA01 E0515H12B8APA01
E0525K12B7AS-00 E0515H24B7ASA01 E0515H24B8ASA01
12 V 24 V
E0525H12B7AP-00 E0515H24B7APA01 E0515H24B8APA01
E0525K12B7AP-00
Option
Option
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above and other modifications.
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above and other Please contact Japan Servo during your product planning and development stage.
modifications. Please contact Japan Servo during your product planning and development stage. ● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
● The listed products are registered in the following overseas standards files, UL: E48889, TUV: R50004410 ● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
E0720H Max. Airflow Max. Static Pressure Noise Speed Voltage Spec. V Current mA
E0720L Max. Airflow Max. Static Pressure Noise Speed Voltage Spec. V Current mA
Fans & Blowers
□70×20 (□2.8"×0.8")
● The characteristics are the values at rated voltage (12 V or 24 V), and normal temperature and humidity.
● Life expectancy of the E0720H-8 series in continuous operation at rated voltage is 20,000 hours at an operating temperature of 60℃. (25,000 hours for other products) □72×20 (□2.8"×0.8")
■ General specification
Max. airflow: 0.29 m /min
3
Max. airflow: 0.31 m3/min Venturi: ABS and PBT synthetic resins
Max. static pressure: 300 Pa Max. static pressure: 265 Pa
Mass: 50 g ■ General specification Mass: 50 g
Materials Used Impeller: ABS and PBT synthetic resins
Bearing: Both side shielded ball bearing
Venturi: ABS and PBT synthetic resins
Materials Used Impeller: ABS and PBT synthetic resins Brushless DC motor, Protection type: Current shut
Silent
■ Features
Silent
Fan model code Motor
Bearing: Both side shielded ball bearing off by detecting lock state, automatically reset
E0720H12B5AP-00 ・ Dimensions almost
Common Elec. Spec. See pages G-11, G-12, G-13.
E0720H12B5AS-00 Brushless DC motor, Protection type: Current shut equivalent to those of
Motor E0720H, yet features Standard Carton 150 to a carton of (450 x 380 x 295) mm, mass 8 kg
off by detecting lock state, automatically reset
E0720H12B5AZ-00 higher airflow and lower
Common Elec. Spec. See pages G-11, G-12, G-13. noise.
E0720H12B7AP-00
Standard Carton 150 to a carton of (450 x 380 x 295) mm, mass 8 kg ・ Suitable for equipment
E0720H12B7AS-00
that prioritizes high airflow
E0720H12B7AZ-00 ■ Standard airflow and static pressure ■ External dimensions in mm (inches) over high static pressure. ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
DC fans
DC fans
characteristics (At rated voltage)
Axial
Axial
E0720H12B7CZ-00 ● Lead wire type ● Lead wire type
E0720H12B8AP-00 [By double chamber method] [By double chamber method]
(Pa) Fan model code (Pa)
E0720H12B8AS-00
300 Lead wire length300±30 300 26±0.3 20
E0720H12B8AZ-00
26±0.3 20 E0720L12B5AZ-00 φ 44 (Intake inside dia.) (1.024±0.012) Lead wire length300±30 (0.79)
E0720H...B8 φ 44 (Intake inside dia.) (1.024±0.012) (11.8±1.2)
(1.69 dia.Intake)
(0.79)
E0720H24B5AZ-00 250 (2-0.18 dia. Intake) E0720L12B7AZ-00 250 E0720L...B8 (11.8±1.2)
E0720H...B7
(1.024±0.012)
Static pressure
E0720L12B8AP-00
(1.024±0.012)
Static pressure
E0720H24B7AZ-00
26±0.3
200 E0720L...B7
26±0.3
E0720L12B8AS-00 200
75.1(2.96)
E0720H24B8AP-00
Centrifugal
Centrifugal
150 E0720L12B8AZ-00 E0720L...B5
76.5 (3.01)
150
(1.22±0.012)
E0720H24B8AS-00
(1.22±0.012)
Intake
41.7(1.64)
31±0.3
Intake
42.2 (1.66)
31±0.3
(1.31)
31±0.3 35.7
33.2
2-φ 4.5 (Through hole) 2-φ 4.5 (Through hole)
0 31±0.3 32.1 0
(0.98)
(2-0.18 dia. HOLES) (1.22±0.012) (1.41)
24.9
0.1 0.2 0.3 (2-0.18 dia. HOLES)
(1.22±0.012) 0.1 0.2 0.3
(1.26) 72.6
Airflow (m3/mi
n) 70.2 (2.76) Airflow (m3/mi
n) (2.86)
Silent
Silent
Lead wire spec. AWG26 UL3265 Lead wire spec. AWG26 UL3265
Color (+) Red Color (+) Red
■ Wiring connection diagram ( - ) Black (CNDC□D4: Blue) ■ Wiring connection diagram ( - ) Black
AC fans
Axial
Axial
When sensor is installed When sensor is installed
Centrifugal
Super silent blower with sensor Super silent blower with sensor
Rated Vol. Model Code Rated Vol. Model Code
E0720H12B5AS-00 E0720H12B7AS-00 E0720H12B8AS-00 E0720L12B8AS-00
12 V 12 V
E0720H12B8AP-00 E0720L12B8AP-00
E0720H12B5AP-00 E0720H12B7AP-00 E0720H24B8AS-00
24 V
E0720H24B8AP-00
Option
Option
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed ● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage. specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586 ● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
Silent
Fan model code Fan model code
Bearing: Both side shielded ball bearing Brushless DC motor, Protection type: Current shut
Motor
SMBD12B4 MBDC12B4 off by detecting lock state, automatically reset
Brushless DC motor, Protection type: Current shut off
SMBD12B4P Motor MBDC12B4S Common Elec. Spec. See pages G-11, G-12, G-13.
by detecting lock state, automatically reset
SMBD12B4S MBDC12H4 Standard Carton 120 to a carton of (450 x 380 x 300) mm, mass 13 kg
Common Elec. Spec. See pages G-11, G-12, G-13.
SMBD12H4 MBDC12H4S
Standard Carton 120 to a carton of (450 x 380 x 300) mm, mass 9 kg
SMBD12H4C MBDC12Z4
SMBD12H4P MBDC12Z4P
■ Standard airflow and static pressure ■ External dimensions in mm (inches) ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
DC fans
DC fans
MBDC12Z4S
Axial
Axial
SMBD12H4S
characteristics (At rated voltage) ● Lead wire type characteristics (At rated voltage) ● Lead wire type
SMBD12Z4 [By double chamber method] MBDC24B4 [By double chamber method]
SMBD12Z4P (Pa) MBDC24B4S (Pa)
Lead wire length 300±30 200 Lead wire length 300±30
SMBD12Z4S 200 MBDC24Z4 (11.8±1.2)
21.6±0.3
(11.8±1.2) (0.850±0.012) 30
φ 50.5 (Intake inside dia.) 21.6±0.3 25 MBDC24Z4S
SMBD24B4 160
φ 50.5 (Intake inside dia.) (1.18)
SMBD...H4 (1.99 dia.Intake) (0.850±0.012) (0.98)
Static pressure
MBDC...H4 (1.99 dia. Intake)
SMBD24B4S 160
(1.217±0.012)
(1.217±0.012)
30.9±0.3
120
Static pressure
SMBD24H4
30.9±0.3
Centrifugal
Centrifugal
120 MBDC...Z4
SMBD24H4P SMBD...Z4
(2.98)
75.7(2.98)
75.7
80
(1.425±0.012)
(1.425±0.012)
SMBD24H4S
36.2±0.3
80
36.2±0.3
Intake Intake
40
(1.60)
(1.60)
SMBD24Z4
40.7
40.7
MBDC...B4
SMBD24Z4S Outlet Outlet
40 0
0 0.1 0.2 0.3 0.4
SMBD...B4
(1.57)
Airflow (m3/mi
n) 2-φ 4.5 (Through hole)
(1.57)
40
39.9
2-φ 4.5 (Through hole) 24.1±0.3 38.1
0 (2-0.18 dia. HOLES) 24.1±0.3 38.1
(2-0.18 dia. HOLES) (0.949±0.012) (1.5) (1.50)
0 0.1 0.2 0.3 0.4 (0.949±0.012)
75.7
Airflow (m3/mi
n) 75.7
(2.98)
(2.98)
Silent
Silent
Lead wire spec. AWG24 UL1007 or UL3266 Lead wire spec. AWG24 UL1007 or UL3266
■ Wiring connection diagram Color (+) Red ■ Wiring connection diagram Color (+) Red
( - ) Black ( - ) Black
Power source (+): Red Power source (+): Red
AC fans
Axial
Axial
When sensor is installed When sensor is installed
Centrifugal
DC centrifugal blower with sensor DC centrifugal blower with sensor
Rated Vol. Model Code Rated Vol. Model Code
SMBD12B4S SMBD12Z4S SMBD12H4S MBDC12B4S MBDC12Z4S MBDC12H4S
12 V 12 V
SMBD12B4P SMBD12Z4P SMBD12H4P MBDC12Z4P
SMBD24B4S SMBD24Z4S SMBD24H4S 24 V MBDC24B4S MBDC24Z4S
24 V
SMBD24H4P
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
Option
Option
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage. ● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586 ● Customizing to the sleeve bearing specification also accepted depending on the intended purchase quantity. Contact Japan Servo for further information.
● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp). ● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
Venturi: ABS and PBT synthetic resins ● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
Materials Used Impeller: ABS and PBT synthetic resins ● The characteristics are the values at rated voltage (12 V or 24 V), and normal temperature and humidity.
□87×18 (□3.4"×0.7") Bearing: Both side shielded ball bearing □94×30 (□3.7"×1.2") ● The life expectancy of SFBD-H speed products at rated voltage and in continuous operation is 30,000 hours at 60 ℃. (40,000 hours for other products)
Max. airflow: 0.26 m /min
3
Max. airflow: 0.65 m3/min
Max. static pressure: 240 Pa
Mass: 60 g Motor
Brushless DC motor, Protection type: Current shut Max. static pressure: 280 Pa
Mass: 135 g
■ General specification
off by detecting lock state, automatically reset
Venturi: ABS and PBT synthetic resins
Common Elec. Spec. See pages G-11, G-12, G-13.
Materials Used Impeller: ABS and PBT synthetic resins
Silent
Silent
Fan model code Fan model code
Bearing: Both side shielded ball bearing
E0818K12B5AZ-00 SFBD12B4
Brushless DC motor, Protection type: Current shut
■ Standard airflow and static pressure SFBD12B4P Motor
off by detecting lock state, automatically reset
characteristics (At rated voltage) SFBD12B4S
Common Elec. Spec. See pages G-11, G-12, G-13.
[By double chamber method] SFBD12H7
Standard Carton 60 to a carton of (450 x 380 x 220) mm, mass 9 kg
SFBD12H7P
SFBD12H7S
■ Standard airflow and static pressure ■ External dimensions in mm (inches)
DC fans
DC fans
SFBD12Z7
Axial
Axial
characteristics (At rated voltage) ● Lead wire type
SFBD12Z7P [By double chamber method]
SFBD12Z7S
SFBD24B4
SFBD24B4S
SFBD24H7
SFBD24H7C
Centrifugal
Centrifugal
SFBD24H7P
SFBD24H7S
■ External dimensions in mm (inches) SFBD24Z7
● Lead wire type SFBD24Z7P
SFBD24Z7S
Silent
Silent
■ Wiring connection diagram
Lead wire spec. AWG24 UL1007 or UL3266
Color (+) Red
( - ) Black
AC fans
AC fans
Axial
Axial
Lead wire spec. AWG26 UL3265
Color (+) Red
( - ) Black
Centrifugal
DC centrifugal blower with sensor
Rated Vol. Model Code
SFBD12B4S SFBD12Z7S SFBD12H7S
12 V
SFBD12B4P SFBD12Z7P SFBD12H7P
SFBD24B4S SFBD24Z7S SFBD24H7S
24 V
SFBD24Z7P SFBD24H7P
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
Option
Option
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
● Customizing to the sleeve bearing specification also accepted depending on the intended purchase quantity. Contact Japan Servo for further information.
● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
Silent
Fan model code Common Elec. Spec. See pages G-11, G-12, G-13. Fan model code 12 5-13.8 250 500 E1033H12B5AM-04
E1033H12B5AM-04 0.53 19 120 0.48 39 2200
E1027H12B7AP-00 24 10-26.4 120 260 E1033H24B5AM-04
E1027H12B7AS-00 E1033H12B6AM-04 ● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
E1027H12B7AZ-00
■ Standard airflow and static pressure ■ External dimensions in mm (inches) E1033H12B7AZ-00 ● The characteristics are the values at rated voltage (12 V or 24 V), and normal temperature and humidity.
E1027H12B8AZ-00
characteristics (At rated voltage) ● Lead wire type E1033H12B8AZ-00 ■ General specification ■ External dimensions in mm (inches)
[By double chamber method]
E1027H12BAAZ-00 E1033H12BAAZ-00 ● Lead wire type (E1033H/Y)
(Pa) 31.5±0.3 30.3 (1.19) (Speed A) Venturi: ABS and PBT synthetic resins
(1.240±0.012) 26.9 (1.06) (Speed 7.8) E1033H24B5AM-04 Lead wire spec. AWG24 UL3266
600 Materials Used Impeller: ABS and PBT synthetic resins Color (+) Red
DC fans
DC fans
E1033H24B6AZ-00 Bearing: Both side shielded ball bearing
Axial
Axial
25.5±0.3 ( - ) Black
E1027H...BA Lead wire length 300±30 5 32±0.3
500 (1.004±0.012) (1.260±0.012)
(11.8±1.2) (0.20) E1033H24B7AZ-00 26±0.3
φ5 Brushless DC motor, Protection type: Current shut (1.024±0.012) 5
0 (In Motor Lead wire length 300±30
(1.480±0.012)
ta
37.6±0.3
(1.9 ke ins E1033H24B8AZ-00 off by detecting lock state, automatically reset (11.8±1.2) (0.20)
(1.205±0.012)
30.6±0.3
(2.05)(1.535±0.012)
Static pressure
(1.260±0.012)
E1027H...B8 . Inta e dia.) (In
(2.0 take ins
39±0.3
32±0.3
ke) E1033H24BAAZ-00 Common Elec. Spec. See pages G-11, G-12, G-13. 5dia ide
.Inta dia.)
(3.74)
ke )
(3.74)
95
(1.591±0.012)
E1027H...B7 E1033Y12BBAP-00
(1.827±0.012)
(1.535±0.012)
Intake
(1.772±0.012)
95
40.4±0.3
46.4±0.3
Intake
39±0.3
(2.10)
45±0.3
E1033Y12BBAS-00
52
53.4
■ Standard airflow and static pressure
(2.28)
Outlet
200 Outlet
58
E1033Y12BBAZ-00
characteristics (At rated voltage)
Centrifugal
Centrifugal
33
100 E1033Y12BCAP-00 [By double chamber method] 4-φ4.5 (Through hole) 31.5±0.3
(2.28)
32±0.3 (4-0.18dia.HOLES) (1.30)
4-φ 4.5 (Through hole) 25 (1.240±0.012)
58
(4-0.18 dia. HOLES) (1.260±0.012) (0.98) E1033Y12BCAS-00 (Pa)
39±0.3 50
39.5±0.3 49.5 (1.535±0.012) (1.97)
0 (1.555±0.012) (1.95) E1033Y12BCAZ-00 800 97.1
0 0.2 0.4 0.6 0.8 1.0 E1033Y...BC (3.82)
97.1
Airflow (m3/min) (3.82) E1033Y24BBAP-00 700
E1033Y...BB ● Terminal type (E1033H□□B□AM-04)
E1033Y24BBAS-00 600 E1033H...BA (Note: Multi-sensor products with lock detection or pulse output,
Static pressure
Lead wire spec. AWG24 UL3266 E1033H...B8 depending on the connection cord.)
E1033Y24BBAZ-00 500 (1.260±0.012)
Color (+) Red E1033H...B7 26±0.3
(1.024±0.012) 5
( - ) Black E1033Y24BCAP-00 400 E1033H...B6 (0.20)
φ5
(1.535±0.012)
E1033H...B5 2 (In
E1033Y24BCAS-00
(1.260±0.012)
Silent
Silent
ta
(2.0 ke ins
39±0.3
■ Wiring connection diagram
32±0.3
300 5 dia id
. Inta e dia.)
E1033Y24BCAZ-00 ke)
(3.74)
200
95
(1.535±0.012)
(1.772±0.012)
Intake
(2.05)
39±0.3
45±0.3
52
Power source (+): Red 100
(2.28)
Outlet
58
0
Sensor output: Yellow 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
4-φ 4.5 (Through hole) 31.5±0.3
33
Airflow (m3/mi
n) (4-0.18 dia. HOLES) (1.240±0.012)
(1.30)
39±0.3 50
■ Wiring connection diagram (1.535±0.012)
97.1
(1.97)
AC fans
AC fans
(3.82)
When sensor is installed Power source (+): Red
Axial
Axial
Accessory cord (DCLD030ZT-ZZ01)
Power source (-): Black This cord is supplied with the terminal type of (-04).
Sensor output: Yellow or orange Cords for S and P sensors also optionally available.
(See page G-74.)
・ Terminal output
Fan connection connector
1: (+)
ZHR−4 (Mfd. by Japan Solderless Terminal)
2: ( - ) GND
320±10
When sensor is installed 3: S sensor output
(Lock detection)
4321
Red (+V)
Black (GND) 4: P sensor output
Power source (-): Black
(Pulse output)
Centrifugal
Centrifugal
Lead wire spec. AWG24 UL3266
Lead wire ends are sheathed to protect the conductors.
(Sheath peeling dimension 10 ±5)
Option
● AM-04 becomes a lock detection sensor (S) type or pulse sensor (P) type in accordance with the connector connection method.
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed Note 1: Purchase a sensor output cord (See page G-74) optionally available or the customer shall provide a cord with equivalent specifications if a
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage. sensor function is desired.
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586 ● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
Silent
Fan model code Fan model code Venturi: ABS and PBT synthetic resins
Venturi: ABS and PBT synthetic resins E1331K12B5AZ-00 Materials Used Impeller: ABS and PBT synthetic resins
E1232L12B5AP-00
Materials Used Impeller: ABS and PBT synthetic resins Bearing: Both side shielded ball bearing
E1232L12B5AZ-00 Bearing: Both side shielded ball bearing E1331K12B6AZ-00
Brushless DC motor, Protection type: Current shut
E1232L12B6AZ-00 E1331K12B7AZ-00 Motor
Brushless DC motor, Protection type: Current shut off by detecting lock state, automatically reset
E1232L12B7AZ-00 Motor off by detecting lock state, automatically reset E1331K12B9AZ-00
Common Elec. Spec. See pages G-11, G-12, G-13.
E1232L12B9AZ-00 E1331K24B5AZ-00
Common Elec. Spec. See pages G-11, G-12, G-13.
E1232L24B5AP-00 E1331K24B6AZ-00
■ Standard airflow and static pressure ■ External dimensions in mm (inches)
DC fans
DC fans
■ Standard airflow and static pressure ■ External dimensions in mm (inches) E1331K24B7AZ-00
Axial
Axial
E1232L24B5AZ-00
E1232L24B6AZ-00 characteristics (At rated voltage) ● Lead wire type E1331K24B9AZ-00 characteristics (At rated voltage) ● Lead wire type
[By double chamber method] [By double chamber method]
E1232L24B7AZ-00
52±0.3 52.8±0.3 Lead wire length 300±30 (Pa) Lead wire length 300±30 3-φ 4.5 (Through hole)
E1232L24B9AZ-00 (Pa) (2.047±0.012)(2.079±0.012) (11.8±1.2) (3-0.18 dia. HOLES)
(11.8±1.2)
(1.461±0.012)
44.6±0.3 43.4±0.3 500
500
37.1±0.3
8 54.4±0.3 50.4±0.3 8
(1.709±0.012)
φ72 (Intake inside dia.) (1.756±0.012) 5 E1331K...B9
E1232L...B9 5 (0.32) (2.142±0.012) (1.984±0.012) (0.32)
(0.650±0.012)
(0.20)
(0.20) (2.84dia.Intake)
16.5±0.3
400
(1.831±0.012)
400
(2.594±0.012)(1.831±0.012)
(2.480±0.012) (1.646±0.012)
Static pressure
E1331K...B7
(2.004±0.012)(1.618±0.012)
Centrifugal
Centrifugal
46.5±0.3
41.8±0.3
Static pressure
E1232L...B7
46.5±0.3
50.9±0.3 41.1±0.3
300
300 E1232L...B6 E1331K...B6
(5.00)
(4.61)
127
E1232L...B5
117
(2.59)
63±0.3
65.9
Outlet
(2.76)
(2.97)
70.2
75.4
100
100
(2.40)
5 6-φ4.3 (Through hole) 44.6±0.3 32 31 9
61
62 50.4±0.3
(0.20)(6-0.17dia. HOLES) (1.756±0.012) (1.26) 0 (1.22) (0.35)
0 0 0.2 0.4 0.6 0.8 1.0 1.2 (2.44) (1.984±0.012)
0 0.2 0.4 0.6 0.8 1.0 1.2 52±0.3 60.4 φ 55 (Intake inside dia.) 126
Airflow (m3/mi
n) (2.17 dia. Intake)
Airflow (m3/mi
n) (2.047±0.012) (2.38)
Silent
Silent
(4.96)
119
(4.69) Lead wire spec. AWG24 UL1007 or UL3266
Lead wire spec. AWG24 UL1007 or UL3266 Color (+) Red
Color (+) Red ( - ) Black
( - ) Black
■ Wiring connection diagram
■ Wiring connection diagram
Power source (+): Red
Power source (+): Red
AC fans
AC fans
Axial
Axial
Sensor output: Yellow Power source (-): Black
Centrifugal
Super silent fan with sensor
Rated Vol. Model Code
12 V E1232H12B5AP-00
24 V E1232H24B5AP-00
Option
Option
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed ● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage. specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586 ● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
Brushless DC motor, Protection type: Overcurrent ■ Standard airflow and static pressure ■ External dimensions in mm (inches)
Silent
Silent
Fan model code Motor ■ Features
detection and automatic resetting by current limiting characteristics (At rated voltage) ● Lead wire type
E1540H12B5AP-00 ・ Large airflow, high static [By double chamber method]
Common Elec. Spec. See pages G-11, G-12, G-13.
E1540H12B5AZ-00 pressure backward (Performance when an inlet ring is combined) 71 (2.80) Rotation
Standard Carton 16 to a carton of (450 x 380 x 220) mm, mass 7 kg blowers without housing. 65 (2.56)
(Pa)
8± 30
E1540H12B7AP-00
2)
1. ±
1.
(1 300
・ A low noise effect can be
800
E1540H12B7AZ-00 ■ Standard airflow and static pressure ■ External dimensions in mm (inches) achieved by combining an
E1540H24B5AP-00 characteristics (At rated voltage) ● Lead wire type inlet ring.
.22± 220
±0 0
7) )
0..7
((33. 800±±
E1540H24B5AZ-00 [By double chamber method] 600
8
Static pressure
DC fans
DC fans
47±0.3 Lead wire length 300±30
Axial
Axial
E1540H24B7AP-00
φ 99 (3.90 dia.)
φ 222 (8.74 dia.)
(Pa) (1.850±0.012)
(11.8±1.2)
E1540H24B7AS-00 500 91 (Intake inside dia.) Fan model code 400
(3.58 dia.Intake)
(1.850±0.012)
E1540H24B7AZ-00 Intake
E1540H...B7 E2271Z48B7AP-00
47±0.3
400 200
(2.303±0.012)
(5.98)
152
300 Intake
58.5±0.3
Static pressure
(3.31)
0 4 8 12 16 20
Airflow (m3/mi
84
n)
Centrifugal
Centrifugal
200 Outlet 4-M4 Depth 6
E1540H...B5 (4-M4 DEPTH 0.23 MAX.)
2-φ 4.5 (Through hole)
(2-0.18 dia.HOLES) φ 58±0.15 Mounting screw hole pitch
(2.88)
58.5±0.3 74 40 Discharge through
100
73.2
(2.303±0.012) (2.91) (1.58) entire periphery (P.C.D=2.283 dia. ±0.006)
150
(5.91)
■ Wiring connection diagram Lead wire spec. AWG24 UL3266
0 Color (+) Red
0 1.0 2.0 3.0 Lead wire spec. AWG24 UL3266 Power source (+): Red ( - ) Black
Airflow (m3/mi
n) Color (+) Red (sensor) Yellow
( - ) Black
Sensor output: Yellow Inlet ring
φ155
Silent
Silent
■ Wiring connection diagram 2
1.5
R2
20
Power source (+): Red When sensor is installed
AC fans
Axial
Axial
Products for variable-speed operation by PWM, voltage or resistance value ・E2271 inlet ring
Power source (-): Black
commands can also be supplied with this model. (See pages G-58 and 59.)
Contact Japan Servo for further information.
Centrifugal
Centrifugal
Super silent fan with sensor
Super silent fan with sensor Rated Vol. Model Code
Rated Vol. Model Code 48 V E2271Z48B7AP-00
12 V E1540H12B5AP-00 E1540H12B7AP-00
E1540H24B5AP-00 E1540H24B7AS-00
24 V ● This product features a large airflow and high static pressure without using a housing. A standard specification is ensured if installed complying with
E1540H24B5AP-00
the foregoing bell mouth shape and its position.
● See page G-73 for detailed dimensions of the intake bell mouth.
● A bell mouth fitting accessory (product code E2271 Inlet Ring) is available as an option. (See page G-73.)
Option
Option
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
● Japan Servo can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
specifications, and other modifications. Please contact Japan Servo during your product planning and development stage.
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
● The listed products are registered in the following overseas standards files, UL: E48889, CSA: LR49399, TUV: R9451586
● An electronic version of the Japan Servo catalog can be forwarded upon request. 3D data is also available at our web2-CAD site (www.web2cad.co.jp).
Silent
G1751M48B7ZP-00 V out Supply volt. MAX.
5000
VL0sat 0.4 MAX.
G1751M48B6ZP-00
Freq. 2000 Hz∼5000 Hz
■ Semi-customized products
Speed (RPM/min)
G1751M48B5ZP-00 4000
E2271Z48B7ZP-00
Semi-customized products, including the following, will be manufactured by combining a large variety of components
vcc 3000 available to Japan Servo. Please contact Japan Servo for more information.
I out 2000
V out 1) For operation in a high-temperature atmosphere of 80 ℃.
Fan 1000 2) Long life products (60,000 hours or longer at 60 ℃, 100,000 hours at 50 ℃)
DC fans
DC fans
Min setting or stop
Axial
Axial
(PWM) 3) Energy saving products (30 % to 50 % less input compared with conventional products)
Hi Duty 0
0 10 20 30 40 50 60 70 80 90 100 4) IP55 products (Outdoor installation and in a high-humidity environment)
Hi Duty (%)
5) Variable-speed products (PWM, voltage or resistance value command), dual-speed products
6) Fans for high static pressure regions (92 mm sq. x 38 mm thick, 120 mm sq. x 38 mm thick, 172 mm dia.
x 51 mm thick and others)
■ Semi-standard products (Products in regular production) 7) Fans to prevent galvanic corrosion of ball bearings (ceramic ball specification)
Centrifugal
Centrifugal
Max. Airflow Max. Static Pressure Noise Speed Voltage Spec. V Operating
Size Model Code
m3/min CFM Pa inH2O dB Max. Min. Rating Operating Range Temp. Range ℃
□120×38 mm D1238B48B7ZP-00 4.4 155 170 0.68 54 4000 1250 48 40.8∼55.2 -20 ∼ +70 ■ Fan tray units
G0938B12BAZP-00 12 8.4∼13.2 ● Tray units fitted with a standard or semi-customized fans.
G0938B24BAZP-00 3.9 138 490 1.97 63 7500 2100 24 16.8∼26.4 -20 ∼ +60 ● Tray shape designed, manufactured and tailored to customer specifications.
G0938B48BAZP-00 48 36∼52.8
□92×38 mm
G0938B12B9ZP-00 12 8.4∼13.8
G0938B24B9ZP-00 3.6 127 440 1.77 61 7000 2000 24 16.8∼27.6 -20 ∼ +60
Silent
Silent
G0938B48B9ZP-00 48 36∼55.2
G1238B12BBZP-00 12 9.6∼13.8
G1238B24BBZP-00 7.4 261 520 2.09 67 6300 1000 24 16.8∼27.6 -20 ∼ +60
□120×38 mm G1238B48BBZP-00 48 36∼55.2
Fan tray unit example 1 Fan tray unit example 2 Fan unit example
G1238B24BAZP-00 24 16.8∼27.6
6.3 223 415 1.67 64 5300 1000 -20 ∼ +60
G1238B48BAZP-00 48 36∼55.2
G1751M48B9ZP-00 11.2 395 840 3.37 76 6800 3200 36∼50.4 -20 ∼ +50
AC fans
AC fans
Axial
Axial
G1751M48B8ZP-00 10.0 353 710 2.85 71 6200 2600
φ172×150×51 mm G1751M48B7ZP-00 9.2 325 580 2.33 69 5600 2000 48
36∼60 -20 ∼ +60
G1751M48B6ZP-00 8.3 293 490 1.97 66.5 5100 1500
G1751M48B5ZP-00 7.3 258 360 1.45 63 4500 1500
φ220×71 mm E2271Z48B7ZP-00 18.1 639 650 2.61 71 3200 1000 48 36∼57 -20 ∼ +60
Centrifugal
Centrifugal
Option
Option
● The lineup of variable-speed fans and blowers will be expanded regularly. Visit the Japan Servo Website for information on the latest lineup.
● Direct your inquiry to Japan Servo for connector termination to lead wires, for sensor specifications other than those contained in the catalog and for
variable speed specifications. (Products tailored to voltage command control and resistance value command control are also available)
● To ensure correct installation and smooth operation please obtain a drawing for approval or reference drawing from Japan Servo Co.
G-58 G-59
AC Axial Fans AC Axial Fans
& Blowers SCUA series □ 120 × φ128 × 25 mm & Blowers SCNA series □ 120 × φ128 × 38 mm
Silent
Fan model code Materials Used Propeller: Glass fiber reinforced polycarbonate resin Fan model code
used in Japan. (Products marked with the (PS)E mark)
SCUA2B5 Bearing: Double - sided shielded ball bearing SCNA2B5
SCUA47F5
Motor
Shaded pole induction motor SCNA47D5 ■ General specification ●Guard mounting
SCUA48F5 Protection type: Impedance protection SCNA48D5 Venturi: Aluminum alloy die casting
SCUA52B5 Common Elec. Spec. See pages G-12. SCNA52B5 Materials Used Propeller: Glass fiber reinforced polycarbonate resin
SCUA55B5 Usage Range Rated voltage ±10 % The guard for the intake side (SCU guard) can be SCNA55B5 Bearing: Double - sided shielded ball bearing
mounted with one touch without using a tool.
SCUJ47F5 Operating Temp. Range -20 ℃ ∼ +60 ℃ SCNA60B5 Shaded pole induction motor
Motor
DC fans
DC fans
Standard Carton 30 to a carton of (560 x 300 x 190) mm, mass 10 kg Protection type: Impedance protection
Axial
Axial
SCUJ48F5 SCNJ47D5
SCUJ55B5 SCNJ48D5 Common Elec. Spec. See pages G-12.
SCUJ60B5 SCNJ55B5 Usage Range Rated voltage ±10 % The guard for the intake side (SCN guard) can be
■ Standard airflow and static pressure characteristics (At rated voltage) mounted with one touch without using a tool.
SCNJ60B5 Operating Temp. Range -20 ℃ ∼ +60 ℃
SCU□□B5 SCU□□F5 Standard Carton 20 to a carton of (565 x 310 x 180) mm, mass 11.5 kg
(Pa) (Pa) ■ Standard airflow and static pressure characteristics (At rated voltage)
Centrifugal
Centrifugal
50
SCN□□B5 SCN□□D5
40 20
Static pressure
Static pressure
60 Hz 60 Hz (Pa) (Pa)
30 100
80
Static pressure
Static pressure
20 30
10 60 Hz
50 Hz 60 60 Hz
10 20
50 Hz 40
0 0 10
20
Silent
Silent
1 2 3 0.5 1 1.5 50 Hz 50 Hz
Airflow (m3/min) Airflow (m3/mi
n) 0 0
1 2 3 1 2 3
Airflow (m3/mi
n) Airflow (m3/mi
n)
■ External dimensions in mm (inches) ■ Mounting hole dimensions in mm (inches)
● Lead wire type [Recommendation] ■ External dimensions in mm (inches) ■ Mounting hole dimensions in mm (inches)
25.5±0.5
(1.0±0.02)
● Lead wire type [Recommendation]
□117 (4.61 sq.)
□120(4.72 sq.) 10 □120 (4.72 sq.) 38.5±0.5
4 □104.8 (4.126 sq.) □117 (4.61 sq.)
AC fans
AC fans
□104.8±0.3 (0.39) 4 (1.5±0.02)
Axial
Axial
(0.16) □104.8±0.3
(4.126 sq.±0.012) (0.16) 10 (0.39) □104.8 (4.126 sq.)
(4.126 sq.±0.012)
.8± 30
)
1.2
(11 00±
.8± 30
)
8
φ 128 (5 dia.)
1.2
12 .)
(11 00±
3
φ dia 8
3
(5
φ 128 (5 dia.)
12 .)
φ dia
(5
Centrifugal
Centrifugal
4 -φ 4.5
(8-0.18 dia.) 4 -φ 4.5
4-φ 4.5 Lug for
guard mounting Outlet side 4-φ 4.5 Lug for (8-0.18 dia.)
Rotation (8-0.18 dia.) (8-0.18 dia.) guard mounting
Airflow Outlet side
Rotation Airflow
Option
Options (sold separately)
・Guard: F120UL guard (Outlet side) Options (sold separately)
・Guard: SCU guard (Intake side) ・Guard: F120UL guard (Outlet side)
・Guard: SCN guard (Intake side)
Silent
Fan model code Fan model code ● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
VE115B5 ■ General specification WE115B5 ● *The symbols in the standards column denote that they are registered in the following standards files, U: UL E48889, T: TUV R60229-60302, V: VDE 3019UG
● *Products conforming to the specifications of the Electrical Appliance and Material Safety Law (Japan) can be used in case the products are assembled in electric appliances
VE2B5 WE2B3
Venturi: Aluminum alloy die casting used in Japan. (Products marked with the (PS)E mark)
VE47F5 Materials Used Propeller: Glass fiber reinforced polycarbonate resin WE2B5
Bearing: Double - sided shielded ball bearing
■ General specification
VE48F5 WE47F3
Venturi: Aluminum alloy die casting
VE50B5 Shaded pole induction motor WE47F5
Motor Materials Used Propeller: Glass fiber reinforced polycarbonate resin
VE52B5 Protection type: Impedance protection WE48F3 Bearing: Double - sided shielded ball bearing
DC fans
DC fans
Common Elec. Spec. See pages G-12. WE48F5
Axial
Axial
VE55B5 Shaded pole induction motor
Usage Range Rated voltage ±10 % WE50B5 Motor
VE60B5 Protection type: Impedance protection
VEJ47F5 Operating Temp. Range -20 ℃ ∼ +60 ℃ ( -20 ℃ ∼ +55 ℃ in standard
-20 ℃ ∼ +40 ℃ in VDE standard )
WE52B3 Common Elec. Spec. See pages G-12.
VEJ48F5 Standard Carton 40 to a carton of (450 x 380 x 160) mm, mass 11 kg WE52B5 Usage Range Rated voltage ±10 %
WE55B3
VEJ55B5 Operating Temp. Range -20 ℃ ∼ +60 ℃ ( -20 ℃ ∼ +55 ℃ in standard
-20 ℃ ∼ +40 ℃ in VDE standard )
VEJ60B5 ■ Standard airflow and static pressure characteristics (At rated voltage) WE55B5 Standard Carton 40 to a carton of (480 x 380 x 160) mm, mass 12 kg
VE□□B5 VE□□F5 WE60B3
Centrifugal
Centrifugal
(Pa) (Pa) WE60B5
■ Standard airflow and static pressure characteristics (At rated voltage)
80 40 WEJ47F5 WE□□B□ WE□□F□
Static pressure
Static pressure
50 Hz (Pa) (Pa)
60 30 WEJ55B5
80 40
60 Hz WEJ60B5
Static pressure
Static pressure
60Hz
60 Hz
40 20 60 30
60 HZ
20 10 40 20 60 HZ
50 Hz 20 10
0 0
Silent
Silent
0.4 0.8 1.2 0.2 0.4 0.6 50 HZ 50 HZ
Airflow (m3/min) Airflow (m3/min) 0
0.4 0.8 1.2
0
0.4 0.8 1.2
Airflow (m3/min) Airflow (m3/min)
AC fans
□82.5 ±0.3 3.7 3.7
Grounding tap
Axial
Axial
(3.248 sq.±0.013) (0.15) (0.15)
M4 through hole 300±30
Grounding tap
(11.8±1.2)
30 87 .) M4 through hole
0± ) φ dia
30 ±1.2 4 3
.8 (3
.
(11
Rotation Airflow
Centrifugal
(8-0.18 dia.)
Identical for the intake and outlet sides
Lead wire specification
Lead wire specification
WEJ series: Heat resistant PVC 0.75 mm2 (30 conductors, 0.18 dia.)
VEJ series: Heat resistant PVC 0.75 mm2 (30 conductors, 0.18 dia.)
WE series: AWG22 UL1015
VE series: AWG22 UL1015
■ Mounting hole dimensions in mm (inches)
Options (sold separately)
[Recommendation]
・Guard: F80UL guard
・Filter: F80 filter Options (sold separately)
・Guard: F92UL guard
Option
Option
・Filter: F92 filter
・Power code: T2P1 code, D2P1 code, UL2P1 code
G-62 G-63
AC Axial Fans AC Axial Fans
& Blowers KA series □ 92 × 38 mm & Blowers CU series □ 120 × 25 mm
AC Axial Fan ■ Standard specification AC Axial Fan ■ Standard specification
KOALA MARKII Max. Airflow Max. Static Pressure Noise Speed Rated Vol. Freq. Model Code
CENTAUR 25 Max. Airflow Max. Static Pressure Noise Speed Rated Vol. Freq. Model Code
Fans & Blowers
Silent
Fan model code Fan model code
200-240 14/10.5 80/ 60 80/ 60 CU48F3 UCP
Venturi: Aluminum alloy die casting CU115B5
KA2B3 ● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
Materials Used Propeller: PBT resin
KA2B4 Bearing: Double - sided shielded ball bearing CU2B3 ● *The symbols in the standards column denote that they are registered in the following standards files, U: UL E48889, C: CSA LR49399, LR108118, T: TUV R60229-60302,
DC fans
CU48F5
Axial
Axial
KA52B3 Operating Temp. Range -20 ℃ ∼ +60 ℃ Materials Used Propeller: Glass fiber reinforced polycarbonate resin
CU50B5 Bearing: Double - sided shielded ball bearing
KA52B5 Standard Carton 20 to a carton of (450 x 380 x 150) mm, mass 10 kg
KA55B3 CU52B3 Shaded pole induction motor
■ Standard airflow and static pressure characteristics (At rated voltage) Motor
CU52B5 Protection type: Impedance protection
KA55B4
KA□□B□ KA□□D□ CU55B3 Common Elec. Spec. See page G-12.
KA60B3
KA60B5 CU55B5 Usage Range Rated voltage ±10 %
KAJ55B4 CU60B3 Operating Temp. Range -20 ℃ ∼ +60 ℃( -20 ℃ ∼ +55 ℃ in standard
)
Centrifugal
Centrifugal
-20 ℃ ∼ +40 ℃ in VDE standard
KAJ60B5 CU60B5 Standard Carton 30 to a carton of (450 x 380 x 160) mm, mass 12 kg
CUJ47F5
■ Standard airflow and static pressure characteristics (At rated voltage)
CUJ55B5 CU□□B□ CU□□F□
CUJ60B5
Silent
● Lead wire type (KA□□□4/KA□□□5) ● Terminal type (KA□□□3)
AC fans
Axial
Axial
Lead wire specification
KAJ series: Heat resistant PVC 0.75 mm2 (30 conductors, 0.18 dia.)
Centrifugal
Centrifugal
KA series: AWG22 UL1015
Lead wire specification
■ Mounting hole dimensions in mm (inches) CUJ series: Heat resistant PVC 0.75 mm2 (30 conductors, 0.18 dia.)
CU series: AWG22 UL1015
[Recommendation]
■ Mounting hole dimensions in mm (inches)
Options (sold separately)
・Guard: F92UL guard
[Recommendation]
・Filter: F92 filter
・Power code: T2P1 code, D2P1 code, UL2P1 code Options (sold separately)
Option
Option
・Guard: F120UL guard
・Filter: F120 filter
・Power code: T2P1 code, D2P1 code, UL2P1 code
G-64 G-65
AC Axial Fans AC Axial Fans
& Blowers CN series □ 120 × 38 mm & Blowers MA series φ172 × 150 × 51 mm
Max. airflow: 2.6 m3/min (50 Hz) 2.8 99 84 0.34 47 3150 220/230 13/13 100/ 90 130/120 CN50B5 UCT Max. airflow: 5.5 m3/min (50 Hz) ● *The symbols in the standards column denote that they are registered in the following standards files, U: UL E48889, C: CSA LR49399
3.0 m3/min (60 Hz) 6.5 m3/min (60 Hz) ● *Products conforming to the specifications of the Electrical Appliance and Material Safety Law (Japan) can be used in case the products are assembled in electric appliances
Max. static pressure: 100-120 9/8.5 110/100 110/100 CN47D5 UCT CN47D3,CN47D2 UCP
Max. static pressure: used in Japan. (Products marked with the (PS)E mark)
83 Pa (50 Hz) 88 Pa (60 Hz) 1.6/ 56/ 23/ 0.09/ 33/ 1700/ 100-120 50/ 8.5/8 110/100 110/100 CNJ47D5 P 152 Pa (50 Hz) 186 Pa (60 Hz)
Mass: 500 g
1.6 56 24 0.10 35 1800 200-240 60 9/8.5 60/50 60/50 CN48D5 UCT CN48D3,CN48D2 UCP Note
Mass: 950 g ■ General specification
Venturi: Aluminum alloy die casting
Silent
Silent
Fan model code 200-240 9/8.5 60/50 60/50 CNJ48D5 P Fan model code
(※): _2: 2 terminals Propeller: ABS and PBT synthetic resins
CN115B5 ● Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
MA2B3
_3: 3 terminals Material used Capacitor cover: Glass fiber reinforced polycarbonate resin
● *The symbols in the standards column denote that they are registered in the following standards files, U: UL E48889, C: CSA LR49399, LR108118 T: TUV R60229-60302 MA47B3
CN2B2 Capacitor: MF capacitor
● *Products conforming to the specifications of the Electrical Appliance and Material Safety Law (Japan) can be used in case the products are assembled in electric appliances
CN2B3 used in Japan. (Products marked with the (PS)E mark) MA48B3 Bearing: Double - sided shielded ball bearing
(Note) Since CN60B2, CN52B2, and CN48D2 do not have a ground terminal, they are not products conforming to the specifications of the Electrical Appliance and Material
CN2B5 MA55B3 Capacitor phase advancing type induction motor
Safety Law (Japan) Motor
CN47D2 MA60B3 Protection type: Thermal protection
■ General specification
CN47D3 MA77B3 Common Elec. Spec. See page G-12.
Venturi: Aluminum alloy die casting
DC fans
DC fans
Usage Range Rated voltage ±10 %
Axial
Axial
CN47D5 Materials Used Propeller: Glass fiber reinforced polycarbonate resin
CN48B3 Bearing: Double - sided shielded ball bearing Operating Temp. Range -20 ℃ ∼ +60 ℃
CN48D2 Shaded pole induction motor Standard Carton 12 to a carton of (380 x 370 x 190) mm, mass 12.0 kg
Motor
CN48D3 Protection type: Impedance protection
CN48D5 Common Elec. Spec. See page G-12. ■ Standard airflow and static pressure characteristics (At rated voltage)
CN50B5 Usage Range Rated voltage ±10 % MA□B3
(Pa)
CN52B2 Operating Temp. Range -20 ℃ ∼ +60 ℃ (-20 ℃ ∼ +55 ℃ in standard)
Centrifugal
Centrifugal
200
CN52B3 Standard Carton 20 to a carton of (450 x 380 x 160) mm, mass 11 kg
CN52B5 160
■ Standard airflow and static pressure characteristics (At rated voltage) 60 Hz
Static pressure
CN55B2 CN□□B□ (Pa)
CN□□D□ (Pa)
120
100 25
CN55B3
CN55B5 80 20 80
Static pressure
60 Hz 60 Hz
Static pressure
CN60B2 60 15 40
CN60B3 50 Hz
40 10
Silent
Silent
CN60B5 50 Hz 0
50 Hz 1 2 3 4 5 6 7
CNJ47D5 20 5
Airflow (m3/min)
CNJ48D5 0 0
1 2 3 0.5 1 1.5
CNJ55B5 Airflow (m3/mi
n) Airflow (m3/mi
n)
CNJ60B5 ■ External dimensions in mm (inches) ● Terminal type ■ External dimensions in mm (inches) ■ Mounting hole dimensions in mm (inches)
[2 terminals: without grounding tap] (CN□□□2)
● Lead wire type (CN□□□5) [3 terminals: with grounding tap] (CN□□□3) ● Terminal type [Recommendation]
□119 (4.69 sq.) 38.5±0.5 □119 (4.69 sq.) 38.5±0.5 51±0.5
146 (5.75)
AC fans
AC fans
(1.5±0.02) (1.5±0.02) (2±0.02) 146 (5.75)
□104.8±0.3
Axial
Axial
4 4 (0.16) □104.8±0.3 8-φ 4.5±0.3
(4.126 sq.±0.012) 5.4 8 9 4 (0.16) φ 172 7 (0.27) 6 (0.24)
(0.16) (4.126 sq.±0.012) Grounding tap (8-0.18 dia.)
Grounding tap (6.77 dia.)
8± 0
1. 0±3
2)
1.
M4 through hole
30
Terminal:
)
a.
16 )
85.4 (3.36)
162±0.3 (6.378 dia. ±0.012)
: φ ia.
(1
0.5 (T) x 3 di
0)
ide 4 d
54
5
(6
.
(6
6 0) φ 162
6
16
es
16
6
(6.37
φ1
tak
φ 8 dia.)
(φ
(In
Name
plate 2-φ 4.5
Centrifugal
Centrifugal
.2 (2-0.18 dia.)
8-φ 4.5±0.3 ±0 R5
Airflow 8-φ 4.5±0.3 R 81
Rotation (8-0.18 dia.) Rotation Airflow 2-R5
(8-0.18 dia.)
Lead wire specification (Note) There is no grounding tap for CN series terminal type.
2-φ 4.5 (2-0.18 dia.) 111°
CNJ series: Heat resistant PVC 0.75 mm2 (30 conductors, 0.18 dia.) 111°
CN series: AWG22 UL1015
□116 (4.61 sq.) 150 (5.91)
■ Mounting hole dimensions in mm (inches) □104.8 (4.126 sq.) Rotation Airflow (2 point mounting) (3 point mounting)
[Recommendation]
.)
dia
Options (sold separately) 8
(5
12
Option
Option
・Guard: F120UL guard φ Options (sold separately)
・Filter: F120 filter ・Guard: GUARD 172
・Power code: T2P1 code, D2P1 code, UL2P1 code (for 2 terminals) 4 -φ 4.5 ・Power code: T2P1 code, D2P1 code, UL2P1 code
D3P1 code, UL3P1 code (for 3 terminals) (8-0.18 dia.)
Silent
Fan model code Fan model code
Venturi: Aluminum alloy die casting
AS2B61 Common Elec. Spec. See page G-12. Yellow
PA2B3 Propeller: ABS and PBT synthetic resins
Material Used Capacitor cover: Glass fiber reinforced polycarbonate resin AS2B61S Usage Range Rated voltage ±10 %
PA47B3 Thermal protector
Capacitor: MF capacitor Operating Temp. Range - 20 ℃ ∼ + 60 ℃
PA48B3 AS52B61
Bearing: Double - sided shielded ball bearing
AS52B61S Standard Carton 10 to a carton of (470 x 405 x 250 ) mm, mass 14.5 kg
PA55B3
Capacitor phase advancing type induction motor AS55B61 ■ Standard airflow and static pressure ■ Capacitor (Normally included)
PA55H3 Motor
Protection type: Thermal protection
PA60B3 AS55B61S characteristics (At rated voltage)
Common Elec. Spec. See page G-12.
DC fans
DC fans
D
AS60B61 AS□B61 (Pa)
Axial
Axial
C
PA77B3
Usage Range Rated voltage ±10 %
4.5
AS60B61S 200
4.75 φ4.3
Operating Temp. Range - 20 ℃ ∼ + 60 ℃ 0.5
160 P
10
Standard Carton 12 to a carton of (420 x 410 x 220) mm, mass 12.5 kg
6.4
Static pressure
120
■ Standard airflow and static pressure characteristics (At rated voltage)
B
60 Hz
E
PA□B3 PA□H3 80 View from P
A
(Pa) (Pa)
Centrifugal
Centrifugal
200 100 40 Mating Capacity External Dimensions in mm
50 Hz
Model Code μF A B C D E
160 80 0 2 4 6 8 10 AS55B61,AS2B61 3.0 31 23.5 24.5 14.5 4
60 Hz
Static pressure
Static pressure
Airflow (m3/mi
n) AS60B61,AS52B61 0.75 37 28 23.5 13.5 3.5
120 60 50 Hz
80 40 ■ External dimensions in mm (inches) ■ Mounting hole dimensions in mm (inches)
● Lead wire type [Recommendation]
40 20 62
□160 (6.30 sq.)
50 Hz 60 Hz (2.44) □156 (6.14 sq.)
□138.5±0.5 (5.453 sq.±0.02) 4 4
Silent
Silent
□138.5 (5.453 sq.)
8± 30
Grounding tap M4 through hole
0 0 (0.16) (0.16)
)
1. ±
2
1 2 3 4 5 6 7 1 2 3 4 5 6 7
1.
(1 300
Airflow (m3/mi
n) Airflow (m3/mi
n)
8
17 )
φ sq.
■ External dimensions in ■ Mounting hole dimensions in mm (inches) (7.
01
mm (inches) [Recommendation]
Terminal: 162 (6.378)
● Terminal type
(0.24)
AC fans
Axial
Axial
4-φ 5.5
34
(4-0.22 dia.)
: φ a.)
0)
(8-0.22 dia.)
5
6.5
162 (6.378)
6.
6(
6(
16 2 (6.3
tak
(0.45)
φ
φ
78)
11.5
Grounding tap (φ
(In
M4 through hole 19
51 (2)
2-φ 4.5
AC axial fan with sensor Mating model code
12-φ 4.5±0.3 7 6
R5 (2-0.18 dia.) 300±30
φ 172 (12-0.18 dia.) (0.27) (0.24) Rated Voltage
(11.8±1.2)
(6.77 dia.) 4-R5 300±30 100 40 58 Model Code Standard*
V(±10 %)
Centrifugal
Sensor box
Centrifugal
(11.8±1.2) (3.94) (1.57) (2.28)
100 AS55B61S U
85.4 (3.36)
(0.98)
Sensor lead wire
(4 point mounting) (3 point mounting)
25
Power lead line
115 AS2B61S U
208-230 AS52B61S U
Sensor circuit
R81±0.15
Option
Option
Airflow □138.5±0.5 (5.453 sq.±0.02) (0.16) (0.16)
Rotation 62 Yellow
□160 (6.30 sq.) Output
(2.44)
Silent
Fan model code Motor
2 Fan model code Terminal: Brass, tin plating
PL2B31 Capacitor phase advancing type induction motor and CB2B3
3 Shaded pole induction motor
Motor 3-phase induction motor Motor
PL2B31-EX CB2B4 Protection type: Impedance protection
Protection type: Thermal protection
3-phase 1 CB52B3 Common Elec. Spec. See page G-12.
PL2B31S
Common Elec. Spec. See page G-12.
U
PL52B31 2
CB52B4 Usage Range Rated voltage ±10 %
Usage Range Rated voltage ±10 % Motor
V
PL52B31-EX CB55B3-Y Operating Temp. Range - 20 ℃ ∼ + 60 ℃
Operating Temp. Range - 20 ℃ ∼ + 60 ℃ W
3 CB55B4-Y
PL52B31S ■ Standard airflow and static pressure characteristics (At rated voltage)
Standard Carton 5 to a carton of (470 x 435 x 215) mm, mass 12 kg
DC fans
DC fans
CB60B3
Axial
Axial
PL55B31
CB□□B□
PL55B31-EX ■ Standard airflow and static pressure ■ Capacitor (Normally included) CB60B4
PL55B31S characteristics (At rated voltage) (Pa)
200
PL60B31 PL □□ B31 PL55B31,PL2B31 PL60B31,PL52B31
(Pa) 20 20
PL60B31-EX 250 φ 4.3 +0.3
- 0.2 φ 4.3 150
Static pressure
60 Hz
PL60B31S Capacity 8 μF Capacity 2 μF
200
PL74B31 60 Hz 100
Centrifugal
Centrifugal
Static pressure
10±3
10±3
150 0.5
PL74B31S 0.5
2-φ 2.7 ±0.2
100 50
3.7
50 Hz 50 Hz
35
4
29
50 19 21.5 4.5
4.5
48 29
48 31.5 0
0.2 0.4 0.6 0.8 1.0
0
4 8 12 Airflow (m3/mi
n)
Airflow (m3/mi
n)
■ External dimensions in mm (inches)
■ External dimensions in mm (inches) ■ Mounting hole dimensions in mm (inches)
● Lead wire type (CB□□4)
[Recommendation]
Silent
Silent
● Terminal type 4P connector for power feeding
Connector HG: AMP 1-480703-0 9 125 (4.92)
Connector pin: AMP 350706-1
or 350705-1
□178 (7.01 sq.) (0.35)
100 (3.94) 63 (2.48) 50.4 62 10 31
40 (1.57)
□152.7 (6.012 sq.) 3-φ 4.5
(1.98) (2.44) (0.39) (1.22)
(1.10)
(3-0.18 dia.)
28
(3.130±0.012)
104.8±0.3 (4.126±0.012)
64 (2.52)
79.5±0.3
63(2.48)
70 (2.76)
0
19 .)
φ dia
(7.
48 φ
60 70
φ
8
AC fans
AC fans
9 (0.35)
126 (4.96)
(0.31)
Axial
Axial
8-intake side
φ6±0.5
8-inner side 4 -φ 5.5
φ5.5±0.5 (4-0.22 dia.)
(8-0.22 dia.) 6
□152.7 ±0.5 (6.012 sq.±0.02) 6 Identical for the intake and outlet sides 8 104.8±0.3 Lead wire specification 300±30
(0.24) 90 (3.54) (0.24)
□180 (7.09 sq.) (0.31) (4.126±0.012) (11.8±1.2)
Centrifugal
4P connector for power feeding
Alarm output 3P connector Connector HG: AMP 1-480703-0 Rated Voltage
Connector HG: AMP Connector pin: AMP 350706-1 Model Code Standard* 125 (4.92)
1-480701-0 or 350705-1 V (±10 %)
Connector pin: AMP 10 31
350706-7 100 (3.94) 40 (1.57) 63 (2.48) 100 PL55B31S 50.4 62
3-φ 4.5 (0.39) (1.22)
(1.98) (2.44)
(1.10)
115
(3.130±0.012)
PL2B31S
70 (2.76)
79.5±0.3
64 (2.52)
(2.48)
208-230 PL52B31S
63
(4.126±0.012)
φ
104.8±0.3
3-phase 200/200-208 PL74B31S UCT 60 70
φ
T: TUV FILE No.9051212
28
126 (4.96)
(1.10)
9 (0.35)
Option
Option
Options (sold separately) Options (sold separately)
8-intake side ・Guard: F180UL guard (2 67 ・Power code: T2P1 code, D2P1 code,
φ6±0.5 .6
・Power code: PL4P1 code 4)
8-inner side
6.2 UL2P1 code
φ 5.5±0.5 T: 0.5
・Sensor code: PL sensor 1 code 104.8±0.3
(0 8
1)
(8-0.22 dia.) □152.7±0.5 (6.012 sq. ±0.02) 6 6 W: 4.75 (0.24)
.3
(0.24) 90 (0.24) (4.126±0.012) L: 6.4 18.5
□180 (7.09 sq.) (3.54) (0.73)
AC Axial Fans
2.5 (φ 17) Media (Polyurethane foam)
□50 Axial fan SKLD ○ WE ○
Retainer SCUDM ○ KA ○
DC Axial Fans
(PPO resin UL94V-0) SCNDM ○ CU ○
52
φ 58
φ 32
φ 10
φ
50
φ KUDC ○ CN ○
38
φ 76.2 φ 89.4 PUDC ○
KLDC ○
4-φ 4.5±0.3
5±0.5
5±0.5 CUDC ○
4-φ 4.5±0.5 4-φ 4.5±0.5 Note: Two retainer pins are CNDH ○
Material: Polycarbonate (black) Material: Mild steel wire 1.6 dia. Material: Mild steel wire 1.6 dia. Material: Mild steel wire 1.6 dia. provided on the F80 filter. D1238 ○
UL94V-2 Surface treatment: Surface treatment: Surface treatment:
4-D
Nickel chromium plating Nickel chromium plating Nickel chromium plating
M/C
(H)
(H)
H
F80 Filter 83.6 10 71.5 φ 3.8
(9) 4-R3±0.4
4-φ 4.6 ±0.5 6 F92 Filter 96.5 10 82.5 φ 3.8
□104.8±0.5 5.9±0.5 2-φ 4.8±0.8 (Inner dimension)
Silent
Silent
□113.3±0.5 6
T
F120 Filter 123.7 10.7 104.8 φ 4.6
(T)
(T)
7
(φ 17)
0.
7±
φ 11.2
2.
15
■ Flange spacer
φ 148.6
161
D
φ 30 A B
φ 115.6
DC fans
DC fans
φ 45
Axial
Axial
E
5±0.5
φ 176
4-φ 4.5±0.5
C
Material: Mild steel wire 1.6 dia. Material: Mild steel wire 1.6 dia. Material: Mild steel wire 2 dia. Material: Mild steel wire 1.6 dia.
Surface treatment: Surface treatment: Surface treatment: Surface treatment: A B C D E
Component (Model Code) Mating Model Code
Nickel chromium plating Nickel chromium plating Nickel chromium plating Nickel chromium plating mm mm mm mm mm
Flange Spacer PUDC(※) 5 8 2 17 14.5 KUDC,PUDC Insert a flange spacer into
List of mating fan series the ribs of a venturi.
F200UL Guard (Mass 82 g)
Centrifugal
Centrifugal
Flange Spacer CUDC(※) 8 11 3.5 15 19.8 CUDC
F60 F80 F92 F120 F127 GUARD F180 F200
Guard F60P SCN SCU Flange Spacer CNDC 8 11 3.5 28 19.8 CNDC (Installing a flange spacer)
UL UL UL UL UL 172 UL UL
5 +2
※Ribbed venturis (PUDC-R, CUDC-R) are available for PUDC and CUDC.
SCU ○*1 ○*2
17
φ
19
+2 VE ○ ■ Inlet ring
AC Axial Fans
φ
WE ○
4.3 -0.2
+0.4
21±1
KA ○ 118
(182.3)
45゚
CU ○ (0.8)
CN ○
Silent
Silent
1.5
φ MA ○
(Mo 188.
unt 4 PA ○
ing
8
φ
0.
pitc
5±
19 h) PL ○ (R 4×φ 4.3±0.5
5.
24
8 +1 22
)
φ
- 1 .5 SKUD ○
4.7 SKLD ○
Material: Mild steel wire 1.6 dia. SCUD ○*1 ○*2
Surface treatment:
φ 155±0.8
SCND ○*1 ○*2
Nickel chromium plating
φ 252
AC fans
AC fans
SCUDM
4×90゚
○
Axial
Axial
SCNDM ○
TUDC ○ ○
SCU Guard (Mass 50 g) SCN Guard (Mass 55 g)
PUDC ○
DC Axial Fans
φ 242±0.8
KLDC ○
φ 29 φ 29
CUDC ○ 6×
6×φ 5.5±0.5 60
CNDC ○ °
Centrifugal
Centrifugal
Through hole
φ 138
φ 138
D1238 ○
Material: Galvanized steel sheet
D1338 ○
MADC ○ Component
PADC ○ Mating Model Code
(Model Code)
G1751 ○ E2271 Inlet ring E2271Z
30.5 43.5
SADC ○
Material: Mild steel wire 1.6 dia. Material: Mild steel wire 1.6 dia.
Surface treatment: Surface treatment:
*1: Can be installed only on outlet side. *2: Can be installed only on intake side.
Nickel chromium plating Nickel chromium plating
Option
Option
All guards conform to the UL standard when combined with Japan Servo fans.
The installation of a filter, guard and other accessories will constitute a ventilating load,
・Guard special for intake side of ・Guard special for intake side of reducing the airflow.Select a suitable guard, taking into consideration the increase in air
SCUD (metal venturi) fans. SCND (metal venturi) fans. resistance. (See Figs. 12 and 13 on page G-7.)
G-72 G-73
Accessories Plug Cords (Options)
■ Plug cords for AC fans
(Common specification: Rated 3 A, voltage 250 V, dielectric strength 1 minute at 1500 V 50 Hz)
Fans & Blowers
20
13
19
8
8
16
D3P1 cord (Mass 59 g) UL3P1 cord (Mass 60 g)
Certified under the Electrical Appliance and UL standard product
Material Safety Law (Japan) (<PS>E mark approved) (UL file No. E78112)
Cord: Cord:
For power feeding 0.18 dia. 30 conductors Black, heat resistant vinyl For power feeding 0.16 dia. 41 conductors Black, heat resistant vinyl
Silent
For grounding 0.18 dia. 50 conductors Black, heat resistant vinyl For grounding AWG18 green/yellow spiral, heat resistant vinyl
24 1000±30 11 30 1000±30
8 15
15.5 For grounding 10 27 For grounding 10
19.5
26
19
8
8
4.5
1000±30
Axial
Connector HG (Plug)
AMP:1-480700-0 Black (6)
Open collector
White
Black output
1
1 White
2 GND
3
Not used 3
Lead wire specification Wiring diagram
UL1007 AWG22
PL4P1 cord
Centrifugal
1000±30 PL 3 Phases (200 V) PL Single Phase (External capacitor) PL-EX Single Phase (Internal capacitor)
Connector HG (Plug)
AMP:1-480702-0 Yellow (6)
Red Yellow U Yellow Capacitor Yellow Not used
Black 1 1 1
Red V Red Red
1 2 2 Power 2 Power
3 Black W 3 phases 3 source 3 source
4 4 Black 4
4 200 V (Single Black (Single
Green/Yellow Green/ Green/ phase) Green/ phase)
Lead wire specification Yellow Wiring diagram Yellow Wiring diagram Yellow Wiring diagram
Yellow, Red, Black:UL1430 AWG20
Green/Yelow: UL1015 AWG18
CU ○ ○ ○
CN(2 terminals) ○ ○ ○
CN(3 terminals) ○ ○
MA ○ ○ ○
AC fans
Axial
PA ○ ○ ○
PL ○ ○
4321
・Lead wire ends are sheathed to protect conductors. (Sheath peeling dimension10±5)
Option
Component
Mating Model Code
(Model Code)
DCLD030ST-ZZ01
E1033H□□B□AM-04
DCLD030PT-ZZ01
G-74