DIFFERENTIAL
PRESSURE CONTROL
PATENTED
DIFFERENTIAL
PRESSURE CONTROL
DIFFERENTIAL
PRESSURE CONTROL
PATENTED
PATENTED
onboard
onboard
DIFFERENTIAL
PRESSURE CONTROL
PATENTED
onboard
DIFFERENTIAL
PRESSURE CONTROL
onboard
PATENTED
onboard
3-way unbalanced load (e.g. 3-way line array)
LF:
MF:
HF:
3000 W @ 8 BTL
1000 W @ 8 SE
500 W @ 8 SE
LF:
3000 W @ 8 BTL
MF/HF: 1500 W @ 8 BTL
2x
140 Vpeak
2000 W @ 8 BTL
ff Thermal protections
(power limiting - thermal shutdown)
ff Short-circuit/overload/high frequency
output protections
ff Clip limiter, permanent signal limiter
ff Auxiliary output voltages
ff Bypass line outputs for
external active/passive filters
ff Mute command
ENTIAL
CONTROL
NTED
ff Temperature controlled
internal fans and output
ff Optional DSP boards
ff Fully integrated in Armona Pro Audio
Suite for Monitoring, Remote Control
& Networking with optional DSP board
oard
DIFFERENTIAL
PRESSURE CONTROL
PATENTED
33 Compact:
ff Power supply, output stage, DSP and connectors are all included in a
single, compact, lightweight and protected chassis
2014 Powersoft Data are subject to change without notice.
onboard
Powersoft S.p.A.
Via Enrico Conti, 5 - 50018 Scandicci (FI) Italy
Tel: +39 055 735 0230 - Fax: +39 055 735 6235
www.powersoft-audio.com
powersoft_DM3004PFC4_data_en_v1.6
DigiMod 3004PFC4
Specifications
General
Number of channels
bridge mode
4 / Ch
8 / Ch
16 / Ch
8 / Ch pair
2000 W
1000 W
600 W
3000 W
2000 W
16 / Ch pair
280 Vpeak
AC Mains Power
Universal regulated, switch mode with PFC
Power supply
AC 90 V - 264 V
Operating range
600 VA
Thermal
Max environmental operating temperature
40C
Thermal dissipation
230 V
621 BTU/h
156 kcal/h
615 BTU/h
155 kcal/h
1154 BTU/h
290 kcal/h
1123 BTU/h
283 kcal/h
Audio
Gain (dB/voltage)
Frequency response
Crosstalk separation
-70 dB @ 1 kHz (4 )
Input sensitivity @ 8
1.6 V / +6 dBu
Input impedance
10 k balanced
THD+N*
DIM100 IMD*
Slew rate
Damping factor
Output type
unbalanced to ground
Configuration
Remote control
Construction
Dimensions
Weight
* Guaranteed by design
Application Examples
Please note that the following configuration examples do not cover all possible applications.
Power ratings could vary depending on acoustic design and speaker specifications. Contact Powersoft for support in selecting the ideal
solution for your specific needs.
3-way line array
2-way
MF: 1000 W @ 8
MF/HF: 1500 W @ 8
MF: 1500 W @ 4
LF: 2 x 1500 W @ 4
LF: 3000 W @ 8
LF: 2000 W @ 8
LF: 3000 W @ 8
HF: 500 W @ 16
HF: 500 W @ 16