DSE7210/20
ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment,
including Electrical Business Equipment
TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30 oC
BS EN 60068-2-2
Bb/Be Dry Heat +70 oC
VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three
major axes
5 Hz to 8 Hz @ +/-7.5 mm,
8 Hz to 500 Hz @ 2 gn
HUMIDITY
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55 oC
@ 95% RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40 oC
@ 93% RH 48 Hours
SHOCK
BS EN 60068-2-27
Three shocks in each of three major axes
15 gn in 11 mS
DEGREES OF PROTECTION
PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - Front of module when installed into the
control panel with the supplied sealing gasket.
USB
PORT
CONFIGURABLE
INPUTS
DC OUTPUTS
ANALOGUE
SENDERS
EMERGENCY
STOP
DC POWER
SUPPLY 8-35V
+
DEUTZ
ISUZU
PERKINS
CATERPILLAR
MTU
VOLVO
CUMMINS
SCANIA
DSE7210/20
7
OTHER
MAINS (UTILITY)
SENSING
DSE7220 ONLY
N/O VOLT
FREE OUTPUT
CURRENT
VOLTS
1ph
2ph
3ph
N
CHARGE
ALTERNATOR
GENERATOR SENSING
1ph
2ph
3ph
VOLTS
D+
W/L
ELECTRONIC
ENGINES &
MAGNETIC PICK-UP
1ph
2ph
3ph
N
ISSUE 7
DSEGenset
DSE7210/20
SPECIFICATION
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing
supply was at least 10 V before dropout and
supply recovers to 5 V. This is achieved
without the need for internal batteries.
LEDs and backlight will not be maintained
during cranking.
MAXIMUM OPERATING CURRENT
340 mA at 12 V, 160 mA at 24 V
MAXIMUM STANDBY CURRENT
160 mA at 12 V, 80 mA at 24 V
DSE7210
KEY FEATURES
4-Line back-lit LCD text display
Five key menu navigation
Front panel editing with PIN
protection
Customisable status screens
Power save mode
6 configurable inputs
8 configurable outputs
Configurable timers and alarms
3 configurable maintenance
alarms
Multiple date and time scheduler
Configurable event log (100)
Tier 4 CAN engine support
Integral PLC editor
Easy access diagnostic page
CAN and Magnetic Pick-up/Alt.
sensing
Fuel usage monitor and low fuel
alarms
Charge alternator failure alarm
Manual speed control (on
compatible CAN engines)
KEY BENEFITS
132 x 64 pixel ratio display for
clarity
Real-time clock provides
accurate event logging
Multiple date and time scheduler
Set maintenance periods can
be configured to maintain
optimum engine performance
Licence-free PC software
IP65 rating (with supplied
gasket) offers increased
resistance to water ingress
PLC editor allows user
configurable functions to meet
specific application
requirements
RELATED MATERIALS
TITLE
DSE7210 Installation Instructions
DSE7220 Installation Instructions
DSE7200/7300 Quick Start Guide
DSE7200/7300 Operator Manual
DSE7200/7300 Configuration Suite PC Manual
PART NOS
053-026
053-027
057-101
057-074
057-077
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change
the details shown on this data sheet without prior notice. The contents are intended for guidance only.
055-050/09/12 (12)