Department
Responsibility/Role
File Name 27599159.doc
Revision
Document Generation Date 14/01/2010 14:03:00
Date Modified 1/14/2010 02:03:00 PM
Last Changed by
Status
Concept
Shop floor statuses can be used to control shop floor move transactions. You can define as many
shop floor statuses as are required. They are assigned to the intraoperation steps of work in
process routing operations. For example, you may want to create a status of Hold to signify that
shop floor assemblies are on hold for quality situations.
In this topic, you will use the Shop Floor Statuses page to create a new status; and the Assign
Shop Floor Statuses page to assign the value to a discrete job.
Additional Information
Procedure
Step Action
1. Begin by navigating to the Shop Floor Statuses page.
Step Action
2. Click the Shop Floor Statuses link.
Step Action
3. The Shop Floor Statuses page is used to define statuses assigned to intraoperation
steps to control movement in routing operations.
Step Action
4. Click in the Status field.
Step Action
5. Enter the desired information into the Status field. Enter "Eng-Test".
Step Action
6. Click in the Description field.
Step Action
7. Enter the desired information into the Description field. Enter "Engineering test
for motor assembly".
Step Action
8. Click the Save button.
Step Action
9. Click the Close Form button.
Step Action
10. Navigate to the Assign Shop Floor Statuses page.
Step Action
11. The Assign Shop Floor Statuses page is used to assign statuses to any
intraoperation step. You can assign multiple statuses to a step, but not the same
status to more than one step within the same operation.
Step Action
12. Click in the Job field.
Step Action
13. Enter the desired information into the Job field. Enter "1234".
Step Action
14. Click the Find button.
Step Action
15. Click in the Operation Sequence field.
Step Action
16. Enter the desired information into the Operation Sequence field. Enter "30".
Step Action
17. Click in the Step field.
Step Action
18. Enter the desired information into the Step field. Enter "Run".
Step Action
19. Click in the Status field.
Step Action
20. Enter the desired information into the Status field. Enter "Eng-Test".
Step Action
21. Click the Save button.
Step Action
22. You have completed the Defining and Assigning Shop Floor Statues procedure.
End of Procedure.