3-SWUP
24th of November 2008
**************************************************************
DISCLAIMER:
Copyright Nokia Siemens Networks 2008. All rights reserved.
No part of this publication may be copied, distributed,
transmitted, transcribed, stored in a retrieval system, or
translated into any human or computer language without the
prior written permission of Nokia Siemens Networks.
The manufacturer has made every effort to ensure that the
instructions contained in the documents are adequate and
free of errors and omissions. The manufacturer will, if
necessary, explain issues which may not be covered by
the documents. The manufacturer's liability for any errors
in the documents is limited to the correction of errors and
the aforementioned advisory services. The documents have
been prepared to be used by professional and properly
trained personnel, and the customer assumes full
responsibility when using them. The manufacturer welcomes customer
comments as part of the process of continual development and
improvement of the documentation in the best way possible from
the user's viewpoint.
Please submit your comments to the nearest Nokia Siemens Networks sales
representative.
NOKIA and the arrows logo are registered trademarks of
Nokia Corporation.
**************************************************************
1.0) General
-----------HIT is a test script driver used to execute and automate
DX200 integration, release and system tests and software
upgrade procedures.
The main features of the HIT include
- capability to send MML and other commands to the exchange
or other target device,
- capability to receive and analyse target device s response and
- capability to influence script execution with control statements.
Bug Fixes:
- HITUM-44: TOFE 229415: HIT 2.10-2-swup does not work correctly via Telnet SSH.
- HITUM-42: TOFE-526110: HIT 2.10-1-swup changes send string
- HITUM-39: TOFE-524310: HIT 2.10-3-swup-beta problem
- HITUM-35: TOFE-67523: Returning from perl function call causes "Abnormal progr
am termination"
- HITUM-29: TOFE-1680303: Hipla/HIT error / Connection error
- HITUM-22: TOFE-507810: Command line startup using specified INI file fails
HIT CASE LIST OPTIONS MAY NEVER BE USED WITH LIVE DX200 NETWORK
ELEMENTS, BECAUSE THEY TURN ON TESTING FEATURES THAT GENERATE
EXTRA LOAD TO THE EXHANGE COMPUTER UNITS AND MODIFY
THE EXHANGE SYSTEM CLOCK !!!!!!!
In the HIT release for the Customer Toolpackage the caselist
options have been turned off, for safety reasons. There should
be no "Options/Case Lists" selection available in the options menu.
4.0) Feedback and failure reports
--------------------------------Failure reports are submitted as failure reports related to
other Nokia Siemens Networks products.