Exercise
Comments MODERATED MARKS
Limited improvement on previous submission
No single model file submitted comments based upon
2d
Xrefd file creating the drawing sheet file
AutoCAD bound
Anwar Hasan- 18040046- CAD Studio 2A -Assignment
1-British Pavillion
Created:
10 December 2012 19:42:18:976
Last updated:
27 August 2014 14:54:15:541
Total editing time: 9 days 19:36:56:887
48 LAYERS 1558 OBJECTS
Mark
No submission via e-mail files from Submitted CD
Anwar Hasan- 18040046- CAD Studio 2A -Assignment 1British Pavillion
Created:
10 December 2012 19:42:18:976
Last updated:
27 August 2014 14:54:15:541
Total editing time: 9 days 19:36:56:887
11/50
LAYERING
1/10
-2
BLOCKS
1/10
Blocks attempt +1
Simple blocks correctly set up with elements on LAYER 0 or 1:100 layers, BYBLOCK, BYBLOCK, BYBLOCK, however in complex blocks 1:50 and 1:10 detail
should be ideally BYLAYER,BYLAYER,BYLAYER [-2]
-2
Minimal use of blocks, several other opportunities to create blocks for repeated elements not undertaken. [-1]
No attribute blocks constructed Ideally all attributes should be on different layers to give greater flexibility [-3]
-4
-3
-4
Blocks on plan incorrectly constructed with elements on level dependant layers which restricts the use of these blocks to this single level. Ideally the contents
of these block should be on non-level dependant layers and then inserted on a level dependant layersee escalator blocks.[-1]
-1
-4
CAD DRAUGHTMANSHIP
3/10
Minimal draughting demonstrated projection at 90o has not been modelled as required by the brief dimensions used for section and elevation appear to be
different to those used for the plans[-3]
Single model generally well laid out though section is NOT at 90o as required by the brief.
Co-ordination between plans elevations and sections could be better, with elements on the plans not reflecting accurately their position on other projections[-2]
-3
Section lines on the plan with references in the model would make understanding easier. [-2]
No hyperlinks added to section lines to assist navigation [-1]
-2
3/10
-2
-6
Xrefs attached using saved pathnames not as recommended. [-1] ie D:\Users\Anwar\Desktop\CAD 2A\cad 2a prints\LINKED FILES\First Floor plan.dwg
-1
PRESENTATION
3/10
-3
-1
-1
-2