ZigBee
RF
Main Features
Simply Control
Easy to operat
e
Instant Control g
roup of many HV
AC and Lights fro
m one central co
ntrol room:
1. Select Devices
2. Set mode
3. Press send
2 Way Communication
Group Control
User Define
Preset Groups
Control
All
Lights
in
Zone
On/Of
All
AirCon in
Zone
On/Of
All ON /
All OFF
all
devices
User
Defined
Scenari
os
Simple Setup
Add Devices is a
s simple as add
contact in phon
e:
1. Select Button
2. Name Room
3. Select Type (A
irCon, Light)
Lock thermostat o
n certain temperat
ure to ensure lowe
r electricity bills
Automatically Power
Off AirCon and Lights
when room left empty
Messages On Line
Pop-Up Errors M
essages on scree
n:
1.
2.
3.
4.
5.
Power Failure
No RF signal
Over Power
Over Temp.
Fire Alarm
Technology
Technology
Wireless by Freescale Inc. (Motorola)
by
Technology
Zigbee Technology
2 Wireless: RF and IR
1. Radio Frequency between thermostat a
nd controller
2. Infrared between thermostat and air co
ndition
IR
RF
System Layout
IR
IR
IR
220V
Room 1
Room 2
IR
Room 3
IR
IR
220V
Room 4
Room 5
Room 6
Master
Controller send
RF command to
closest device.
Then signal is
routed in mesh
to all other
devices in the
area
IR
IR
IR
IR
220V
IR
220V
System Layout
IR
Master Controller in
each zone is located in
the center of that area
volume to get the
shortest distance to all
devices for its zone
control.
Master co
ntroller in
middle of
each zone
Building 1
System Layout
Building 2
1
2
IR
3
4
220V
Master controller is located
in each zone of around 100
devices.
It send data in diferent
channel so there is no RF
conflict
Control
Room
5
6
7
8
9
Building 1
System Layout
All Master Controller are
connected to standard
TCP-IP to control room
server.
This allow total control of
all controllers in the
building/s from one
central control room
Control
Room
TCPIP
Building 2
2 Installation ways:
Wire (Modbus)
(ZigBee)
Wireless
Products
Power Off AirCon and Light when room is left empty for a preset time (15, 30 or 60 minutes)
Sensor work with 2 AAA batteries.
The END
RF
ZigBee