Agenda
1. Welcome
2. Review of group Scope and Mission
3. Update on CIGRE B1.34, Mechanical Forces In Large Cross
Section Cable Systems, by Dennis Johnson, Power Engineers,
Inc.
4. Experimental Verification of Thermo-Mechanical (TM) Models for
XLPE Cable in Pipes & Ducts, 2012 Research Status Update,
Steve Eckroad, EPRI
5. Discussions - all
Introduction
Scope:
To provide a forum for discussion of factors to be considered
when designing engineered constraining systems for single
core XLPE transmission cable joints in manholes.
Mission:
To consolidate information from suppliers, consultants,
utilities and researchers on best practices for constraining
single core transmission cables with joints in manholes.
To explore related subjects on influencing factors, such as
adjacent duct configurations and geometries.
To eventually consider other cable and joint configurations,
such as in tunnels, vertical shafts and transitions to direct
burial.
Background
Background to Discussion Group
This is the 6th formal meeting, following an initial ad hoc meeting.
Original plans were to evolve into a Working Group to develop a
Guide or Recommended Practice.
However, the last meeting attendees decided that we would be
duplicating efforts by CIGRE Working Group B1.34 with similar
goals.
It was therefore decided to continue as a Discussion Group,
providing information to CIGRE B1.34 as appropriate.
Bibliography (1)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Schifreen, Cyclic Movement of Cable Its Causes and Effects on Cable Sheath Life, AIEE Paper 44-131, May
1944.
Schifreen, Thermal Expansion Effects in Power Cables, AIEE Paper 51-22, November, 1950.
Bauer, C.A., Nease, Evaluation of cable movement due to cyclic loading, AIEE Transactions, vol 73, Part III-B,
pp 281-287, April 1954.
Follins, C.W., et al, An investigation of creep, fracture, and bending of arsenical lead alloys for cable sheathing,
Engineering Bulletin #440, vol. 54, no. 38, University of Ilinois, 1955.
Holttum, The Installation of Metal Sheathed Cables on Spaced Supports, Proceedings of the IEE, Vol. 102, Pt.
A, pages 729-742, 1955.
Kura, Yanagiuchi, Shimada, Mechanical characteristics of corrugated aluminum sheath, Dainichi Cable Review
No. 20, July 1961.
Imai, Kikuchi, Suzuki, Prevention of Sliding of Cable Laid in Sloping Duct (Report 1), Furukawa Electric Review
No. 32, p 10-23, 1963.
Araki, Inoue, Mechanical Properties of Aluminum Cable Sheath, Dainichi Cable Review No. 24, Feb. 1963.
Betzer, C.E., Determination of the life to fracture by bending of lead sheaths on underground power cable, AIEE
Transactions, vol. 81, Pt. III, pp. 907-911, 1963.
Imai, Kikuchi, Prevention of Sliding of Cable Laid in Sloping Duct (Report 2), Furukawa Electric Review No. 37,
p 13-20, 1965.
Kura, Shimada, Bending characteristics of aluminum cable sheath, Dainichi Nippon Cables Review No. 30,
Aug. 1965.
Kasahara, T., et al, On strain analysis of vertical offset cable ( Part 1), Showa Densen Denran Review, vol. 16,
no. 1, pp. 47-53, 1966 (in Japanese).
Bibliography (2)
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
Iizuka, K., et al, Development research on 275 kV aluminum sheathed OF cable, Denryoku, vol. 50, no. 8, pp.
59-67, 1966 (in Japanese).
Beckman, J., Tests on thirteen different lead cable sheathing materials, Lead 65, Proceedings of the Second
International Conference on Lead, pp. 85-98, 1967.
Inoue, H, et al, Structural stability of lead sheathing alloys, Dainichi Nippon Densen Jiho, no. 35, Mar. 1967 (in
Japanese).
Holdup, Occhini, Skipper, Thermo-Mechanical Behaviour of Large Conductor Cables, IEEE Paper 31 TP 67478, July 1967.
Iizuka, Okazaki, Takenouchi, A study on snake installation method of the aluminum sheathed cable (Part 1),
Showa-Densen Review, Vol. 18, No. 3, 1968.
Hirai, Iizuka, Kasahara, Kusano, Matsuo, Soda, Yoda, A study on snake installation method of the aluminum
sheathed cable (Part 2), Showa-Densen Review, Vol. 20, No. 3, 1970.
Endacott J.D. et al, Thermal design parameters used for high capacity EHV cable circuits in Great Britain,
CIGRE 21-03, 1970.
Aso, Hirai, Iizuka, Harada, Kasahara, Kusano, Matsuo, Soda, Yoda, A study on snake installation method of the
aluminum sheathed cable (Part 3), Showa-Densen Review, Vol. 21, No. 2, 1971.
Arkell, Arnaud, Skipper, The Thermo-Mechanical Design of High Power, Self Contained Cable Systems, paper
21-05, CIGRE 1974.
Foulsham N et al, Proposals for installation practice of single core cables, IEE Vol. 21 No. 10, Oct. 1974.
Hirai, Iizuka, Kasahara, Ueno, The design of snake installation for bulk size aluminum sheathed cables, IEEE
PES Winter Meeting, Jan. 1975.
Ichino, Ohata, Ono, Watanabe, The study of the installation method for 66 kV single core XLPE cable to be
installed in the tunnel, Dainichi Nippon Cables Review, May 1977.
Bibliography (3)
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
Ando, Hirai, Kasahara, Kihara, Kuroyanagi, Okada, Sagara, Yoshikawa, Installation of 66 kV single core XLPE
insulated power cable for Siohama-Minami line of Tokyo Electric Power Co., Showa-Densen Review Vol. 27 No.
1, 1977.
Havard, D.G., Selection of cable sheath lead alloys for fatigue resistance, IEEE Transactions on Power
Apparatus and Systems, vol. PAS-96, no. 1, pp. 80-87, Jan/Feb. 1977.
Oasa, H, et al, Characteristics of several lead alloys for oil filled cable sheathing, Proceedings of the 27th
Session, Paris, France, Paper no. 21-08, Aug. 1978.
Keishi, Matsuike, Oguma, Ohhata, Ohno, Yoneyama, Study on the method of installation of class 66 kV cables,
Sumitomo Electric Technical Review No. 18, Dec. 1978.
Lawson, W.G., et al, Fatigue and creep phenomena in oil-filled supertension cables, IEE Conference
Publication No. 176, 2nd International Conference on Progress in Cables and Overhead Lines for 220 kV and
Above, London, England, pp. 181-187, 1979.
Lawson, Head, Lombardi, Anelli, Fatigue and Creep Phenomena in Oil-Filled Supertension Cables, IEE
Conference Publication no. 176, International Conference on Progress in Cables and Overhead Lines for 220 kV
and Above, 2nd, London, England, pages 181-187, Sept. 6, 1979.
Krishnasamy, Fatigue Resistance of Large Size Helically Corrugated Aluminum Sheathed Cable, IEEE
Transactions on Power Apparatus and Systems, Vol. PAS-99, No. 6, Nov/Dec 1980.
Shinji Yoshikawa, Installation Method for 77 kV XLPE Cables, Sumitomo Electrical Review No. 22, January
1983.
Nakagawa, Ono, Tanizawa, Takehama, Installation of 275 kV XLPE cables in the long and steep slope tunnel,
IEEE Transactions on Power Apparatus and Systems Vol. PAS 102 No. 12, Dec. 1983.
Nakabasami, Nakagawa, Sugiyama, Development of various snaking installation methods of cables in Japan,
Jicable 84.
Anneli, P., The fatigue life of lead alloy E as a sheathing material, IEEE/PES 1986 Summer Meeting, Mexico
City,1986.
9
Bibliography (4)
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
10
Bibliography (5)
48.
49.
50.
51.
52.
53.
54.
55.
Brincourt, Dorison, Thermomechanical Behaviour of 400 kV Synthetic Cables, paper A4.2, Jicable 99, 1999.
CIGRE Working Group 21.17, Construction, laying and installation techniques for extruded and self contained
fluid filled cable systems, CIGRE Technical Brochure 194, October 2001.
Umeda, Matsura, Watanabe, Sakaguchi, Ohimo, Development of 275 kV XLPE Cable with Aluminum
Laminated Tape and Radial Moisture Barrier, paper A.1.5, Jicable 03.
CIGRE Joint Task Force 21/15, Interfaces in accessories for extruded HV and EHV cables, ELECTRA No. 203,
CIGRE Technical Brochure 210, August 2002.
Yamada, Nakagawa, Katakai, Kishi, Nakanishi, Murata, Development of Heat-resistant XLPE Cable and
Accessories, ICPADM, 2003.
EPRI, Mechanical Effects on Extruded Dielectric Cables and Joints Installed in Underground Transmission
Systems in North America, Technical Report 1001849, March 2004.
CIGRE Task Force B1-10, Thermal Ratings of HV Accessories, ELECTRA No. 212, February 2004.
Zenger, Galloway, Gregory, Thermo-Mechanical Design of XLPE Insulated HV and EHV Cables Installed in
Duct-Manhole and Pipe Systems, paper B1-111, CIGRE 2006.
11