This behavior causes the error to write data in RAM, editing, clean the PIN swap
. Test program that checked bad .dll
16.(stop code 0Xc0000221) Status Image Checksum Mismatch
Possible causes and solutions:
This symptom is caused by a corrupted swapfile includes drivers. It was like an
15.
17.(stop code 0X000000EA) Thread Stuck In Device Driver
Possible causes and solutions:
The symptom of this error is that your computer is running in a loop repeatedly
not ending, the error
notification or any satot whatever it don't stop. The cause of this problem may
be caused by a Bug of
program or other causes is. To fix this, try to follow.
1. See your Power supply enough power supply with demand of you, see if you have
many devices to not suit
your Power supply, it is the leftmost new release.
-First event win 1.1 Born from the second (I have set to address the current Not
ebook 2) specification, primarily coding.
CPU:AMD Barton 2500 (210*11=2310)
M/B:Abit A7N
Ram:1G Dual Kington
Powersupply: Enamax 465P-VE
And decorate abundantly The first, a program or game that has been heavy desks t
he hom came one day, this error
condition occurs as an ideal solution, and then try again, it is not just the e
xcuse, your article to
see A-e-e of this link by UnlimitPC http://www.unlimitpc.com/modules.php...howpa
ge&pid=19 , take a look
at the Bios, it is true you ? A-e-e that it won't delay your management A-e-e ta
ught many symptoms without
completely lost heart cycle. Thankful you A-e-e come over here with me.
-Second win with 1.2 contributes the first specification components.
CPU: AMD 1700 T-Bred (166 * 11 = 1826) (Over clock on the brain).
M/B:Soltek 75FRN2-RL
Ram:512MB Dual Geil
Powersupply: Enamax 351P-VE
And decorate it like a true mamuean. has no problem did exist, this error again.
This time he does not fear,
understand that when Wen, make the Bios it locally as ever, they manage to edit
it wont come. Not lost on me
as it is with a removable seat ngom tem all machine parts, check out the proble
m until it is a Capacitor that
motherboard for the CPU power supply with low salt island .some swelling.
Writing came long to actually win, know to tell your people may be having proble
ms like me khun is not the solution.
2. You see video card drivers that use the latest. If you use the recent guidenc
e and still have symptoms,
perform Rollback the drivers before the problem occurs.
3. Check the video card and the motherboard is damaged or missing, burn, laiwong
chon. A piece of garden pieces from the same place.
4. See if Bios VGA slot select mode section, 4x, 8x, is based on the specificati
on of garbage or not.
5. Check to see that the server has the record bo damen spring drive or not if y
ou have to load the new!
6. If you have a LAN card or your motherboard with on board, disable the functio
ns "PXE Resume/Remote Wake Up" by going to the BIOS.
18.(stop code 0X0000007F) Unexpected Kernel Mode Trap
Possible causes and solutions:
This symptom is most to Overclock (hair one) is not CPU RAM transmission, sympto
ms are related to CPU is
running too fast or overheat caused by clock Overclock solutions is reduced down
to a normal for the cooling of the CPU.
19. (stop code 0X000000ED) Unmountable Boot Volume
Possible causes and solutions:
Symptoms that Windows finds hard to find (not boots) If you have multiple hard d
isks. In it, you may use wire
nueng packages of hard errors, such as a hard disk as a 33MB/40, which used a s
ecound pin, but you continue removing 80 pin instead.