: Ahmad Wildan
Dikky Fakhrudin
( 120534400671 )
( 120534431472 )
Prodi
Offering
:A
Seen above that comprises many components electronic. Whether it's active or
passive component parts. The components - components in the circuit above is as follows:
1. Resistor
Serves to custody or inhibitor, is an electronic component that provides resistance to
movement of electrons (negative charge). Resistor size we use in this tool are: R1
(100K), R2 (10K), R3 (47K), R4 (1K)
2. Trimpot
A resistor whose value can change with the shifting or turning the toggle on the tool.
So the value of the resistor can be set according to the kebutuhan.Ukuran trimpot that
we use in this tool are: 10 K
3. Non-polar capacitor
Storage device that serves to charge without polarity. Capacitor size that we used in
this tool are: C1 (10F), C2 (1F)
4. Diodes
Tool that serves to rectifier currents. Diode size that we used in this tool are: D1 (IN
4002)
5. Transistor
6. Thermistor
Obstacles electric current whose values change based on temperature or temperature.
7. IC (intregated Circuit)
Serves as a component in the brain of the working tools that we have created. IC
type we use is IC NE555.
8. Relay 9 Volt
Relays are electrically operated device that mechanically controls the transport of
electrical circuits. Relay is an important part of many system control, useful for
remote control and for controlling voltage and high current equipment with a control
signal voltage and low current. When current flows through the electromagnet in the
relay control electro mechanical, magnetic field which attracts the iron arm of the
anchor on the core formed. As a result, the contact on the anchor and frame relay
connected. Relays can have NO contact (Normaly Open) or NC contacts (Normaly
Close) or a combination of both.