Department
Responsibility/Role
File Name 27812869.doc
Revision
Document Generation Date 19/01/2010 12:25:00
Date Modified 1/19/2010 12:25:00 PM
Last Changed by
Status
Concept
You can use Control Charts to chart all or only specific quality results associated with a
collection plan. Control charts are used to determine whether process stability has been upset by
special or assignable causes.
Oracle Quality provides the following types of control charts and pairs of control charts:
• Xbar and R charts (XBar R): A pair of line graph charts which plot subgroups of data
collected over a continuous period of time.
• Individual X and Moving Range charts (XmR): A pair of charts based on individual data
points instead of subgroups.
• Xbar and S charts (XBar S): A pair of line charts similar to the Xbar and R charts except
that the standard deviation is used instead of the range when the S chart is plotted.
Additional Information
Procedure
Step Action
1. Click the vertical scrollbar.
Step Action
2. Click the Manufacturing and Distribution Manager link.
Step Action
3. Click the vertical scrollbar.
Step Action
4. Click the Control Charts link.
Step Action
5. Use the Organizations page to select the appropriate organization.
Step Action
6. Click the M1 list item.
Step Action
7. Click the OK button.
or Press [Alt+O].
Step Action
8. Use the Control Charts page to enter a name in the Chart Name field and select
the collection plan you want to chart.
Step Action
9. Click in the Chart Name field.
Step Action
10. Enter the desired information into the Chart Name field. Enter "Linethickness for
CB".
Step Action
11. Click in the Collection Plan field.
Step Action
12. Enter the desired information into the Collection Plan field. Enter "CB
COLLECTION PLAN".
Step Action
13. Click in the Chart Title field.
Step Action
14. Enter the desired information into the Chart Title field. Enter "CB Linethickness
Control Chart".
Step Action
15. Click the Chart Type list.
Step Action
16. Select the Chart Type as:
• XBar R: when the subgroup size is less than 10.
• X mR: when monitoring a process that produces quality results that do not
naturally fall into subgroups.
• XBar S: when the subgroup size is greater than 10.
Step Action
17. Click the X Bar / R list item.
Step Action
18. Click in the Collection Element field.
Step Action
19. Enter the desired information into the Collection Element field. Enter
"LINETHICKNESS".
Step Action
20. Click the Control Limits... button.
or Press [Alt+o].
Step Action
21. Use the Control Limits page to define control limits based on collection results.
Use this page to enter the Subgroup Size. Select the Compute New button to
recalculate control limits when you enter a subgroup size.
Step Action
22. Click in the Control Limit Name field.
Step Action
23. Enter the desired information into the Control Limit Name field. Enter "CB LINE
THICKNESS".
Step Action
24. Click in the Subgroup Size field.
Step Action
25. Enter the desired information into the Subgroup Size field. Enter "6".
Step Action
26. Click the Compute New button.
or Press [Alt+C].
Step Action
27. Click the OK button.
Step Action
28. Click the Save button.
Step Action
29. Click the View Chart button.
Step Action
30. Click the Close Window link.
Step Action
31. Click the OK button.
or Press [Alt+O].
Step Action
32. Click the Close button.
Step Action
33. You have completed the Creating and Viewing Control Charts procedure.
End of Procedure.